Skip to contentSkip to conversation

Convert i.MX7 WaRP7 ports to DM

PATCH RESEND New Bryan O'Donoghue 3 participants 18 messages Jan 18, 2019 – Jan 30, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v3 cover Convert i.MX7 WaRP7 ports to DM

V3-Resend:
- Looks like this set got lost in the ether, resending.

V3:
- Fix Lucas' mail address "Auer, Lucas" makes git send-mail choke

V2:
- Add review-by as indicated - Peng Fan
- Squash commit 4 and 5 from v1 - Peng Fan
- Leave usdhc1 intact because of alias of mmc0 to usdhc3 - Bryan
- Add correction for spelling mistake in imx7d-pinfunc.h - Lukas Auer
- Imports imx7s-warp7.dts from kernel unmodified as a result of #1 - Bryan

V1:
This series does a minimal conversion of WaRP7 and the BL33 version of WaRP7 to the DM.

Pinctrl, GPIO, I2C, Regulators, PMIC and MMC are converted. Later patches will convert USB and UART.

Bryan O'Donoghue (8):
arm: dts: imx7: Correct spelling mistake in GPIO name
arm: dts: imx7s-warp: Import Linux warp7 dts
arm: imx7s-warp: Add DT file hooks
arm: imx7s-warp: Convert to DM MMC initialization
arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports
warp7: defconfig: Switch to DM for I2C
arm: imx7s-warp: Convert to DM PMIC

 arch/arm/dts/Makefile        |   3 +-
 arch/arm/dts/imx7d-pinfunc.h |   6 +-
 arch/arm/dts/imx7s-warp.dts  | 442 +++++++++++++++++++++++++++++++++++
 board/warp7/warp7.c          |  85 +------
 configs/warp7_bl33_defconfig |  14 +-
 configs/warp7_defconfig      |  14 +-
 include/configs/warp7.h      |   8 -
 7 files changed, 484 insertions(+), 88 deletions(-)
 create mode 100644 arch/arm/dts/imx7s-warp.dts
Signature · 1 line
2.20.0
#1 lore raw

PATCH RESEND v3 1/8 arm: dts: imx7: Correct spelling mistake in GPIO name

As pointed out by Lucas WDOD1_WDOG_ANY should be WDOG1_WDOG_ANY. Once corrected we can import the latest kernel DTS unmodified.

---
 arch/arm/dts/imx7d-pinfunc.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm/dts/imx7d-pinfunc.h +3 -3
index f6f7e78f88..f2493bc63d 100644
@@ -17,9 +17,9 @@
 
 #define MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0                       0x0000 0x0030 0x0000 0x0 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO00__PWM4_OUT                        0x0000 0x0030 0x0000 0x1 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_ANY                  0x0000 0x0030 0x0000 0x2 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG_B                    0x0000 0x0030 0x0000 0x3 0x0
-#define MX7D_PAD_LPSR_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB           0x0000 0x0030 0x0000 0x4 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_ANY                  0x0000 0x0030 0x0000 0x2 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B                    0x0000 0x0030 0x0000 0x3 0x0
+#define MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG__RST_B_DEB           0x0000 0x0030 0x0000 0x4 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1                       0x0004 0x0034 0x0000 0x0 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT                        0x0004 0x0034 0x0000 0x1 0x0
 #define MX7D_PAD_LPSR_GPIO1_IO01__CCM_ENET_REF_CLK3               0x0004 0x0034 0x0000 0x2 0x0
Signature · 1 line
2.20.0
#2 lore raw

PATCH RESEND v3 1/8 arm: dts: imx7: Correct spelling mistake in GPIO name

Quoted 4 lines

As pointed out by Lucas WDOD1_WDOG_ANY should be WDOG1_WDOG_ANY. Once corrected we can import the latest kernel DTS unmodified.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#3 lore raw

PATCH RESEND v3 2/8 arm: dts: imx7s-warp: Import Linux warp7 dts

In reply to Bryan O'Donoghue

This patch imports the Linux kernel warp7 dts as at upstream kernel commit cf76c364a1e1.

Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
---
 arch/arm/dts/imx7s-warp.dts | 438 ++++++++++++++++++++++++++++++++++++
 1 file changed, 438 insertions(+)
 create mode 100644 arch/arm/dts/imx7s-warp.dts
arch/arm/dts/imx7s-warp.dts new file +438 -0
new file mode 100644
index 0000000000..f7ba2c0a24
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 NXP Semiconductors.
+ * Author: Fabio Estevam <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7s.dtsi"
+
+/ {
+	model = "Warp i.MX7 Board";
+	compatible = "warp,imx7s-warp", "fsl,imx7s";
+
+	memory at 80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_gpio>;
+		autorepeat;
+
+		back {
+			label = "Back";
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+	};
+
+	reg_brcm: regulator-brcm {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	reg_bt: regulator-bt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_bt_reg>;
+		enable-active-high;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		regulator-name = "bt_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx7-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,cpu {
+			sound-dai = <&sai1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <884736000>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000 at 8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: sgtl5000 at a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sai1_mclk>;
+		VDDA-supply = <&vgen4_reg>;
+		VDDIO-supply = <&vgen4_reg>;
+		VDDD-supply = <&vgen2_reg>;
+	};
+
+	mpl3115 at 60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&sai1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai1>;
+	assigned-clocks = <&clks IMX7D_SAI1_ROOT_SRC>,
+			  <&clks IMX7D_SAI1_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
+	assigned-clock-rates = <0>, <36864000>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&uart3  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	no-1-8-v;
+	fsl,tuning-step = <2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_brcm_reg: brcmreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_WP__GPIO5_IO10	0x14 /* WL_REG_ON */
+		>;
+	};
+
+	pinctrl_bt_reg: btreggrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA3__GPIO5_IO17	0x14 /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1	0x14
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX7D_PAD_I2C2_SDA__I2C2_SDA	0x4000007f
+			MX7D_PAD_I2C2_SCL__I2C2_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX7D_PAD_I2C3_SDA__I2C3_SDA	0x4000007f
+			MX7D_PAD_I2C3_SCL__I2C3_SCL	0x4000007f
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX7D_PAD_I2C4_SCL__I2C4_SCL	0x4000007f
+			MX7D_PAD_I2C4_SDA__I2C4_SDA	0x4000007f
+		>;
+	};
+
+	pinctrl_sai1: sai1grp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0	0x1f
+			MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK	0x1f
+			MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC	0x1f
+			MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0	0x30
+		>;
+	};
+
+	pinctrl_sai1_mclk: sai1mclkgrp {
+		fsl,pins = <
+			MX7D_PAD_SAI1_MCLK__SAI1_MCLK           0x1f
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+			MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX	0x79
+			MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX	0x79
+			MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS	0x79
+			MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS	0x79
+		>;
+	};
+
+	pinctrl_uart6: uart6grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX	0x79
+			MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD	0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK	0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0	0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1	0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2	0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3	0x59
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* WL_HOST_WAKE */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x19
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1a
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x1b
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B	0x74
+		>;
+	};
+};
Signature · 1 line
2.20.0
#4 lore raw

PATCH RESEND v3 2/8 arm: dts: imx7s-warp: Import Linux warp7 dts

Quoted 7 lines

This patch imports the Linux kernel warp7 dts as at upstream kernel commit cf76c364a1e1.

Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#5 lore raw

PATCH RESEND v3 3/8 arm: imx7s-warp: Add DT file hooks

In reply to Bryan O'Donoghue

This patch adds DT file hooks for imx7s-warp.dtb to the warp7 and warp7_bl33 builds.

Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
---
 arch/arm/dts/Makefile        | 3 ++-
 configs/warp7_bl33_defconfig | 3 ++-
 configs/warp7_defconfig      | 3 ++-
 3 files changed, 6 insertions(+), 3 deletions(-)
arch/arm/dts/Makefile +2 -1
index dda4e59491..4fe7e90902 100644
@@ -460,7 +460,8 @@ dtb-$(CONFIG_MX6ULL) += imx6ull-14x14-evk.dtb
 
 dtb-$(CONFIG_MX7) += imx7-colibri.dtb \
 	imx7d-sdb.dtb \
-	imx7d-sdb-qspi.dtb
+	imx7d-sdb-qspi.dtb \
+	imx7s-warp.dtb
 
 dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb
 
configs/warp7_bl33_defconfig +2 -1
index a568c6d10e..12141fedd3 100644
@@ -20,6 +20,7 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DFU_MMC=y
@@ -37,5 +38,5 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
 CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
-CONFIG_OF_LIBFDT=y
 CONFIG_OPTEE_TZDRAM_SIZE=0x2000000
+CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
configs/warp7_defconfig +2 -1
index 4d443295ba..fee98dfbbe 100644
@@ -29,6 +29,7 @@ CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DFU_MMC=y
@@ -47,8 +48,8 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_USB_ETHER=y
 CONFIG_USB_ETH_CDC=y
 CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
-CONFIG_OF_LIBFDT=y
 CONFIG_OPTEE_LOAD_ADDR=0x84000000
 CONFIG_OPTEE_TZDRAM_SIZE=0x3000000
 CONFIG_OPTEE_TZDRAM_BASE=0x9d000000
 CONFIG_BOOTM_OPTEE=y
+CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
Signature · 1 line
2.20.0
#6 lore raw

PATCH RESEND v3 3/8 arm: imx7s-warp: Add DT file hooks

Quoted 8 lines

This patch adds DT file hooks for imx7s-warp.dtb to the warp7 and warp7_bl33 builds.

Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#7 lore raw

PATCH RESEND v3 4/8 arm: imx7s-warp: Convert to DM MMC initialization

In reply to Bryan O'Donoghue

Converts from fixed initialization of MMC to DM initialization of MMC.

Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
---
 board/warp7/warp7.c          | 34 ----------------------------------
 configs/warp7_bl33_defconfig |  1 +
 configs/warp7_defconfig      |  1 +
 3 files changed, 2 insertions(+), 34 deletions(-)
board/warp7/warp7.c +0 -34
index 3d32b3eb52..146d722b15 100644
@@ -30,8 +30,6 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \
 			PAD_CTL_HYS)
-#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW |	\
-			PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
 
 #define I2C_PAD_CTRL	(PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
 	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
@@ -74,43 +72,11 @@ static iomux_v3_cfg_t const uart1_pads[] = {
 	MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-static iomux_v3_cfg_t const usdhc3_pads[] = {
-	MX7D_PAD_SD3_CLK__SD3_CLK     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_CMD__SD3_CMD     | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX7D_PAD_SD3_RESET_B__SD3_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
 static void setup_iomux_uart(void)
 {
 	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
 };
 
-static struct fsl_esdhc_cfg usdhc_cfg[1] = {
-	{USDHC3_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-		/* Assume uSDHC3 emmc is always present */
-		return 1;
-}
-
-int board_mmc_init(bd_t *bis)
-{
-	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-
-	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-}
-
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
configs/warp7_bl33_defconfig +1 -0
index 12141fedd3..b2f943c775 100644
@@ -24,6 +24,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DFU_MMC=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
configs/warp7_defconfig +1 -0
index fee98dfbbe..65d801ffe2 100644
@@ -33,6 +33,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DFU_MMC=y
+CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC=y
 CONFIG_OPTEE=y
 CONFIG_USB=y
Signature · 1 line
2.20.0
#8 lore raw

PATCH RESEND v3 4/8 arm: imx7s-warp: Convert to DM MMC initialization

Quoted 6 lines

Converts from fixed initialization of MMC to DM initialization of MMC.

Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#9 lore raw

PATCH RESEND v3 5/8 arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3

In reply to Bryan O'Donoghue

This patch sets up an alias for mmc0 to usdhc3.

Before the DM conversion only usdhc3 was enabled and therefore it appeared as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2, which left unattended would drive changes to existing warp7 bootscripts and environment variables that rely on mmc 0.

Setup the alias of mmc0 and usdhc3 so that existing warp7 boot code will work unmodified.

Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
---
 arch/arm/dts/imx7s-warp.dts | 4 ++++
 1 file changed, 4 insertions(+)
arch/arm/dts/imx7s-warp.dts +4 -0
index f7ba2c0a24..d28b7ec715 100644
@@ -17,6 +17,10 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
+	aliases {
+		mmc0 = &usdhc3;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&pinctrl_gpio>;
Signature · 1 line
2.20.0
#10 lore raw

PATCH RESEND v3 5/8 arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3

Quoted 7 lines

This patch sets up an alias for mmc0 to usdhc3.
Before the DM conversion only usdhc3 was enabled and therefore it appeared as MMC 0 to u-boot. After enabling MMC DM though usdhc3 defaults to MMC 2, which left unattended would drive changes to existing warp7 bootscripts and environment variables that rely on mmc 0.
Setup the alias of mmc0 and usdhc3 so that existing warp7 boot code will work unmodified.

Quoted 5 lines
Cc Albert Aribaud <[email protected]>
Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#11 lore raw

PATCH RESEND v3 6/8 warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports

In reply to Bryan O'Donoghue

Switches on the IMX7 pinctrl driver for the warp7 and warp7_bl33 ports, necessary to convert over to DM for this board.

It is necessary to switch on pinctrl and GPIO in one go.

Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>
---
 configs/warp7_bl33_defconfig | 3 +++
 configs/warp7_defconfig      | 3 +++
 2 files changed, 6 insertions(+)
configs/warp7_bl33_defconfig +3 -0
index b2f943c775..7f21bb4f53 100644
@@ -41,3 +41,6 @@ CONFIG_USB_ETH_CDC=y
 CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
 CONFIG_OPTEE_TZDRAM_SIZE=0x2000000
 CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_GPIO=y
configs/warp7_defconfig +3 -0
index 65d801ffe2..2d3171e42a 100644
@@ -54,3 +54,6 @@ CONFIG_OPTEE_TZDRAM_SIZE=0x3000000
 CONFIG_OPTEE_TZDRAM_BASE=0x9d000000
 CONFIG_BOOTM_OPTEE=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
+CONFIG_DM_GPIO=y
Signature · 1 line
2.20.0
#12 lore raw

PATCH RESEND v3 6/8 warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports

Quoted 7 lines

Switches on the IMX7 pinctrl driver for the warp7 and warp7_bl33 ports, necessary to convert over to DM for this board.
It is necessary to switch on pinctrl and GPIO in one go.

Cc Peng Fan <[email protected]>
Cc Fabio Estevam <[email protected]>
Cc Stefano Babic <[email protected]>

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#13 lore raw

PATCH RESEND v3 7/8 warp7: defconfig: Switch to DM for I2C

In reply to Bryan O'Donoghue

This commit switches to DM I2C for warp7 and warp7_bl33 defconfigs.

---
 board/warp7/warp7.c          | 24 ------------------------
 configs/warp7_bl33_defconfig |  1 +
 configs/warp7_defconfig      |  1 +
 include/configs/warp7.h      |  2 --
 4 files changed, 2 insertions(+), 26 deletions(-)
board/warp7/warp7.c +0 -24
index 146d722b15..19f0df4d09 100644
@@ -31,26 +31,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define UART_PAD_CTRL  (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \
 			PAD_CTL_HYS)
 
-#define I2C_PAD_CTRL	(PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
-	PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM)
-
-#ifdef CONFIG_SYS_I2C_MXC
-#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
-/* I2C1 for PMIC */
-static struct i2c_pads_info i2c_pad_info1 = {
-	.scl = {
-		.i2c_mode = MX7D_PAD_I2C1_SCL__I2C1_SCL | PC,
-		.gpio_mode = MX7D_PAD_I2C1_SCL__GPIO4_IO8 | PC,
-		.gp = IMX_GPIO_NR(4, 8),
-	},
-	.sda = {
-		.i2c_mode = MX7D_PAD_I2C1_SDA__I2C1_SDA | PC,
-		.gpio_mode = MX7D_PAD_I2C1_SDA__GPIO4_IO9 | PC,
-		.gp = IMX_GPIO_NR(4, 9),
-	},
-};
-#endif
-
 int dram_init(void)
 {
 	gd->ram_size = PHYS_SDRAM_SIZE;
@@ -130,10 +110,6 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-	#ifdef CONFIG_SYS_I2C_MXC
-		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	#endif
-
 	return 0;
 }
 
configs/warp7_bl33_defconfig +1 -0
index 7f21bb4f53..2e80011cbc 100644
@@ -44,3 +44,4 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
configs/warp7_defconfig +1 -0
index 2d3171e42a..9f7dc73a11 100644
@@ -57,3 +57,4 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7=y
 CONFIG_DM_GPIO=y
+CONFIG_DM_I2C=y
include/configs/warp7.h +0 -2
index a391dfb5c1..41eb8d7e1d 100644
@@ -126,9 +126,7 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* I2C configs */
-#define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* PMIC */
Signature · 1 line
2.20.0
#14 lore raw

PATCH RESEND v3 7/8 warp7: defconfig: Switch to DM for I2C

Quoted 6 lines

This commit switches to DM I2C for warp7 and warp7_bl33 defconfigs.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
#15 lore raw

PATCH RESEND v3 8/8 arm: imx7s-warp: Convert to DM PMIC

In reply to Bryan O'Donoghue

This patch converts the warp7 and warp7_bl33 board ports over to using the DM PMIC model.

---
 board/warp7/warp7.c          | 27 +++++++++++----------------
 configs/warp7_bl33_defconfig |  6 ++++++
 configs/warp7_defconfig      |  6 ++++++
 include/configs/warp7.h      |  6 ------
 4 files changed, 23 insertions(+), 22 deletions(-)
board/warp7/warp7.c +11 -16
index 19f0df4d09..6ebeb08e33 100644
@@ -64,29 +64,24 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#ifdef CONFIG_POWER
-#define I2C_PMIC       0
-static struct pmic *pfuze;
+#ifdef CONFIG_DM_PMIC
 int power_init_board(void)
 {
-	int ret;
-	unsigned int reg, rev_id;
+	struct udevice *dev;
+	int ret, dev_id, rev_id;
 
-	ret = power_pfuze3000_init(I2C_PMIC);
-	if (ret)
+	ret = pmic_get("pfuze3000", &dev);
+	if (ret == -ENODEV)
+		return 0;
+	if (ret != 0)
 		return ret;
 
-	pfuze = pmic_get("PFUZE3000");
-	ret = pmic_probe(pfuze);
-	if (ret)
-		return ret;
-
-	pmic_reg_read(pfuze, PFUZE3000_DEVICEID, &reg);
-	pmic_reg_read(pfuze, PFUZE3000_REVID, &rev_id);
-	printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id);
+	dev_id = pmic_reg_read(dev, PFUZE3000_DEVICEID);
+	rev_id = pmic_reg_read(dev, PFUZE3000_REVID);
+	printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", dev_id, rev_id);
 
 	/* disable Low Power Mode during standby mode */
-	pmic_reg_write(pfuze, PFUZE3000_LDOGCTL, 0x1);
+	pmic_clrsetbits(dev, PFUZE3000_LDOGCTL, 0, 1);
 
 	return 0;
 }
configs/warp7_bl33_defconfig +6 -0
index 2e80011cbc..7b40bfbd6d 100644
@@ -45,3 +45,9 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
configs/warp7_defconfig +6 -0
index 9f7dc73a11..d1c8e403a7 100644
@@ -58,3 +58,9 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX7=y
 CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PFUZE100=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PFUZE100=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
include/configs/warp7.h +0 -6
index 41eb8d7e1d..043f2861b6 100644
@@ -129,12 +129,6 @@
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED		100000
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_PFUZE3000
-#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08
-
 /* environment organization */
 #define CONFIG_ENV_SIZE			SZ_8K
 
Signature · 1 line
2.20.0
#16 lore raw

PATCH RESEND v3 8/8 arm: imx7s-warp: Convert to DM PMIC

Quoted 7 lines

This patch converts the warp7 and warp7_bl33 board ports over to using the DM PMIC model.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
reviewer
#17 lore raw

v3 cover Convert i.MX7 WaRP7 ports to DM

In reply to Bryan O'Donoghue

Hi Bryan,

Quoted 21 lines · Bryan O'Donoghue

V3-Resend:
- Looks like this set got lost in the ether, resending.

V3:
- Fix Lucas' mail address "Auer, Lucas" makes git send-mail choke

V2:
- Add review-by as indicated - Peng Fan
- Squash commit 4 and 5 from v1 - Peng Fan
- Leave usdhc1 intact because of alias of mmc0 to usdhc3 - Bryan
- Add correction for spelling mistake in imx7d-pinfunc.h - Lukas Auer
- Imports imx7s-warp7.dts from kernel unmodified as a result of #1 - Bryan

V1:
This series does a minimal conversion of WaRP7 and the BL33 version of WaRP7 to the DM.

Pinctrl, GPIO, I2C, Regulators, PMIC and MMC are converted. Later patches will convert USB and UART.

Quoted 9 lines

Bryan O'Donoghue (8):
arm: dts: imx7: Correct spelling mistake in GPIO name
arm: dts: imx7s-warp: Import Linux warp7 dts
arm: imx7s-warp: Add DT file hooks
arm: imx7s-warp: Convert to DM MMC initialization
arm: dts: imx7s-warp: Create alias for mmc0 to &usdhc3
warp7: defconfig: Switch on IMX7 GPIO/pinctrl for both ports
warp7: defconfig: Switch to DM for I2C
arm: imx7s-warp: Convert to DM PMIC

Looks good, thanks: