i.MX8QXP: MEK: support SPL
Subsystems (6)
v2 cover i.MX8QXP: MEK: support SPL
This is to support SPL for i.MX8QXP MEK board and default support SPL. In this patchset, use SPL FIT, but actually we could not use SPL FIT for secure boot, in NXP vendor tree, there is another format called container, NXP use SPL + container for secure boot. The container support is on my TODO list. But to make SPL work in upstream, use SPL FIT here.
V2:
Correct patch 9/10 10/10, SPL_TEXT_BASE is patch 9/10 is wrong, however 10/10 corrected, so clean that.
Peng Fan (10):
imx8qxp: add SUPPORT_SPL option
imx8: scu: use dedicated MU for SPL
arm: imx: build mach-imx for i.MX8
gpio: introduce CONFIG_SPL_DM_PCA953X
spl: imx8: add spl boot device
dts: imx8qxp-mek: introduce u-boot dtsi
imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
imx: build flash.bin for i.MX8
imx8qxp: mek: default enable SPL
imx8qxp: mek: update README
Makefile | 2 +- arch/arm/Makefile | 2 +- arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 112 +++++++++++++++++++++++++++++++ arch/arm/dts/fsl-imx8qxp-mek.dts | 1 + arch/arm/mach-imx/Makefile | 15 ++++- arch/arm/mach-imx/imx8/Kconfig | 8 +++ arch/arm/mach-imx/mkimage_fit_atf.sh | 3 +- arch/arm/mach-imx/spl.c | 14 +++- board/freescale/imx8qxp_mek/Makefile | 1 + board/freescale/imx8qxp_mek/README | 8 ++- board/freescale/imx8qxp_mek/imximage.cfg | 4 +- board/freescale/imx8qxp_mek/spl.c | 75 +++++++++++++++++++++ configs/imx8qxp_mek_defconfig | 24 +++++++ drivers/gpio/Kconfig | 23 +++++++ drivers/gpio/Makefile | 2 +- drivers/misc/imx8/scu.c | 4 ++ include/configs/imx8qxp_mek.h | 26 +++++++ 17 files changed, 311 insertions(+), 13 deletions(-) create mode 100644 arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi create mode 100644 board/freescale/imx8qxp_mek/spl.c
Signature · 1 line
2.14.1
PATCH v2 1/10 imx8qxp: add SUPPORT_SPL option
Enable SUPPORT_SPL option for i.MX8QXP, then we could enable SPL.
--- arch/arm/mach-imx/imx8/Kconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm/mach-imx/imx8/Kconfig +1 -0
@@ -5,6 +5,7 @@ config IMX8 config IMX8QXP select IMX8 + select SUPPORT_SPL bool config SYS_SOC
Signature · 1 line
2.14.1
PATCH v2 1/10 imx8qxp: add SUPPORT_SPL option
Quoted 2 lines
Enable
SUPPORT_SPLoption for i.MX8QXP, then we could enable SPL.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 2/10 imx8: scu: use dedicated MU for SPL
In reply to Peng FanSPL runs in EL3 mode, except MU0_A, others are not powered on, and could not be used. However normal U-Boot use MU1_A, so we could not reuse the one in dts. And we could not replace the one in dts with MU0_A, because MU0_A is reserved in secure world.
--- arch/arm/mach-imx/imx8/Kconfig | 7 +++++++ drivers/misc/imx8/scu.c | 4 ++++ 2 files changed, 11 insertions(+)
arch/arm/mach-imx/imx8/Kconfig +7 -0
@@ -3,6 +3,13 @@ if ARCH_IMX8 config IMX8 bool +config MU_BASE_SPL + hex "MU base address used in SPL" + default 0x5d1b0000 + help + SPL runs in EL3 mode, it use MU0_A to communicate with SCU. + So we could not reuse the one in dts which is for normal U-Boot. + config IMX8QXP select IMX8 select SUPPORT_SPL
drivers/misc/imx8/scu.c +4 -0
@@ -191,7 +191,11 @@ static int imx8_scu_probe(struct udevice *dev)if (addr ==FDT_ADDR_T_NONE )return -EINVAL ; +#ifdef CONFIG_SPL_BUILD + plat->base = (struct mu_type *)CONFIG_MU_BASE_SPL ; +#else plat->base = (struct mu_type *)addr; +#endif /* U-Boot not enable interrupts, so need to enable RX interrupts */ mu_hal_init (plat->base);
Signature · 1 line
2.14.1
PATCH v2 2/10 imx8: scu: use dedicated MU for SPL
Quoted 5 lines
SPL runs in EL3 mode, except
MU0_A, others are not powered on, and could not be used. However normal U-Boot useMU1_A, so we could not reuse the one in dts. And we could not replace the one in dts withMU0_A, becauseMU0_Ais reserved in secure world.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 3/10 arm: imx: build mach-imx for i.MX8
In reply to Peng FanTo enable SPL for i.MX8, we could reuse code in arch/arm/mach-imx.
--- arch/arm/Makefile | 2 +- arch/arm/mach-imx/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
arch/arm/Makefile +1 -1
@@ -103,7 +103,7 @@ libs-y += arch/arm/cpu/ libs-y += arch/arm/lib/ ifeq ($(CONFIG_SPL_BUILD),y) -ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m)) +ifneq (,$(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_MX35)$(filter $(SOC), mx25 mx5 mx6 mx7 mx35 imx8m imx8)) libs-y += arch/arm/mach-imx/ endif else
arch/arm/mach-imx/Makefile +1 -1
@@ -24,7 +24,7 @@ obj-y += cpu.o speed.o obj-$(CONFIG_GPT_TIMER) += timer.o obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o endif -ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m)) +ifeq ($(SOC),$(filter $(SOC),mx7 mx6 mxs imx8m imx8)) obj-y += misc.o obj-$(CONFIG_SPL_BUILD) += spl.o endif
Signature · 1 line
2.14.1
PATCH v2 3/10 arm: imx: build mach-imx for i.MX8
Quoted 2 lines
To enable SPL for i.MX8, we could reuse code in
arch/arm/mach-imx.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 4/10 gpio: introduce CONFIG_SPL_DM_PCA953X
In reply to Peng FanIntroduce CONFIG_SPL_DM_PCA953X for SPL usage.
--- drivers/gpio/Kconfig | 23 +++++++++++++++++++++++ drivers/gpio/Makefile | 2 +- 2 files changed, 24 insertions(+), 1 deletion(-)
drivers/gpio/Kconfig +23 -0
@@ -292,6 +292,29 @@ config DM_PCA953X Now, max 24 bits chips and PCA953X compatible chips are supported +config SPL_DM_PCA953X + bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL" + depends on DM_GPIO + help + Say yes here to provide access to several register-oriented + SMBus I/O expanders, made mostly by NXP or TI. Compatible + models include: + + 4 bits: pca9536, pca9537 + + 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, + pca9556, pca9557, pca9574, tca6408, xra1202 + + 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, + tca6416 + + 24 bits: tca6424 + + 40 bits: pca9505, pca9698 + + Now, max 24 bits chips and PCA953X compatible chips are + supported + config MPC8XXX_GPIO bool "Freescale MPC8XXX GPIO driver" depends on DM_GPIO
drivers/gpio/Makefile +1 -1
@@ -9,7 +9,7 @@ obj-$(CONFIG_AXP_GPIO) += axp_gpio.o endif obj-$(CONFIG_DM_GPIO) += gpio-uclass.o -obj-$(CONFIG_DM_PCA953X) += pca953x_gpio.o +obj-$(CONFIG_$(SPL_)DM_PCA953X) += pca953x_gpio.o obj-$(CONFIG_DM_74X164) += 74x164_gpio.o obj-$(CONFIG_AT91_GPIO) += at91_gpio.o
Signature · 1 line
2.14.1
PATCH v2 4/10 gpio: introduce CONFIG_SPL_DM_PCA953X
Quoted 2 lines
Introduce
CONFIG_SPL_DM_PCA953Xfor SPL usage.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 5/10 spl: imx8: add spl boot device
In reply to Peng FanAdd spl_boot_device for i.MX8, also add BOOT_DEVICE_MMC2_2 for spl_boot_mode.
--- arch/arm/mach-imx/spl.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
arch/arm/mach-imx/spl.c +12 -2
@@ -96,7 +96,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_NONE; } -#elif defined(CONFIG_MX7) || defined(CONFIG_IMX8M) +#elif defined(CONFIG_MX7) || defined(CONFIG_IMX8M) || defined(CONFIG_IMX8)/* Translate iMX7/i.MX8M boot device to the SPL boot device enumeration */ u32 spl_boot_device (void ) {
@@ -134,6 +134,15 @@ u32 spl_boot_device(void)case SD3_BOOT :case MMC3_BOOT :return BOOT_DEVICE_MMC1 ; +#elif defined(CONFIG_IMX8 ) +case MMC1_BOOT : +return BOOT_DEVICE_MMC1 ; +case SD2_BOOT : +return BOOT_DEVICE_MMC2_2 ; +case SD3_BOOT : +return BOOT_DEVICE_MMC1 ; +case FLEXSPI_BOOT : +return BOOT_DEVICE_SPI ;#elif defined(CONFIG_IMX8M )case SD1_BOOT :case MMC1_BOOT :
@@ -152,7 +161,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_NONE; } } -#endif /* CONFIG_MX7 || CONFIG_IMX8M */ +#endif /* CONFIG_MX7 || CONFIG_IMX8M || CONFIG_IMX8 */ #ifdef CONFIG_SPL_USB_GADGET_SUPPORT int g_dnl_bind_fixup (struct usb_device_descriptor *dev,const char *name)
@@ -171,6 +180,7 @@ u32 spl_boot_mode(const u32 boot_device)/* for MMC return either RAW or FAT mode */ case BOOT_DEVICE_MMC1 :case BOOT_DEVICE_MMC2 : +case BOOT_DEVICE_MMC2_2 :#if defined(CONFIG_SPL_FAT_SUPPORT )return MMCSD_MODE_FS ;#elif defined(CONFIG_SUPPORT_EMMC_BOOT )
Signature · 1 line
2.14.1
PATCH v2 5/10 spl: imx8: add spl boot device
Quoted 3 lines
Add
spl_boot_devicefor i.MX8, also addBOOT_DEVICE_MMC2_2forspl_boot_mode.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 6/10 dts: imx8qxp-mek: introduce u-boot dtsi
In reply to Peng FanIntroduce u-boot dtsi for i.MX8QXP MEK board.
we do not introduce a common dtsi for SoC, because different board has different requirement on which needs to be enabled in SPL DM.
--- arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi | 112 +++++++++++++++++++++++++++++++ arch/arm/dts/fsl-imx8qxp-mek.dts | 1 + 2 files changed, 113 insertions(+) create mode 100644 arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi
arch/arm/dts/fsl-imx8qxp-mek-u-boot.dtsi new file +112 -0
@@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018 NXP + */ + +&mu { + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pd_lsio { + u-boot,dm-spl; +}; + +&pd_lsio_gpio0 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio1 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio2 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio3 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio4 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio5 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio6 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio7 { + u-boot,dm-spl; +}; + +&pd_conn { + u-boot,dm-spl; +}; + +&pd_conn_sdch0 { + u-boot,dm-spl; +}; + +&pd_conn_sdch1 { + u-boot,dm-spl; +}; + +&pd_conn_sdch2 { + u-boot,dm-spl; +}; + +&gpio0 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&gpio6 { + u-boot,dm-spl; +}; + +&gpio7 { + u-boot,dm-spl; +}; + +&lpuart0 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +};
arch/arm/dts/fsl-imx8qxp-mek.dts +1 -0
@@ -6,6 +6,7 @@ /dts-v1/; #include "fsl-imx8qxp.dtsi" +#include "fsl-imx8qxp-mek-u-boot.dtsi" / { model = "Freescale i.MX8QXP MEK";
Signature · 1 line
2.14.1
PATCH v2 6/10 dts: imx8qxp-mek: introduce u-boot dtsi
Quoted 4 lines
Introduce u-boot dtsi for i.MX8QXP MEK board.
we do not introduce a common dtsi for SoC, because different board has different requirement on which needs to be enabled in SPL DM.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 7/10 imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
In reply to Peng FanIntroduce BL33_BASE_ADDR, then we could reuse this script for i.MX8QXP.
--- arch/arm/mach-imx/mkimage_fit_atf.sh | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/mach-imx/mkimage_fit_atf.sh +2 -1
@@ -9,6 +9,7 @@ [ -z "$BL31" ] && BL31="bl31.bin" [ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0xfe000000" [ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0x00910000" +[ -z "$BL33_LOAD_ADDR" ] && BL33_LOAD_ADDR="0x40200000" if [ ! -f $BL31 ]; then echo "ERROR: BL31 file $BL31 NOT found" >&2
@@ -58,7 +59,7 @@ cat << __HEADER_EOF type = "standalone"; arch = "arm64"; compression = "none"; - load = <0x40200000>; + load = <$BL33_LOAD_ADDR>; }; atf at 1 { description = "ARM Trusted Firmware";
Signature · 1 line
2.14.1
PATCH v2 7/10 imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
Quoted 2 lines
Introduce
BL33_BASE_ADDR, then we could reuse this script for i.MX8QXP.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 8/10 imx: build flash.bin for i.MX8
In reply to Peng FanBuild flash.bin for i.MX8 when SPL enabled.
--- Makefile | 2 +- arch/arm/mach-imx/Makefile | 13 +++++++++++++ 2 files changed, 14 insertions(+), 1 deletion(-)
Makefile +1 -1
@@ -1200,7 +1200,7 @@ tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE SPL: spl/u-boot-spl.bin FORCE $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ -ifeq ($(CONFIG_ARCH_IMX8M), y) +ifeq ($(CONFIG_ARCH_IMX8M)$(CONFIG_ARCH_IMX8), y) flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ endif
arch/arm/mach-imx/Makefile +13 -0
@@ -105,6 +105,7 @@ IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%) ifeq ($(CONFIG_ARCH_IMX8), y) CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh IMAGE_TYPE := imx8image +SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi) DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi) else ifeq ($(CONFIG_ARCH_IMX8M), y) IMAGE_TYPE := imx8mimage
@@ -153,6 +154,18 @@ ifeq ($(DEPFILE_EXISTS),0) endif endif +ifeq ($(CONFIG_ARCH_IMX8), y) +SPL: + +MKIMAGEFLAGS_flash.bin = -n spl/u-boot-spl.cfgout -T $(IMAGE_TYPE) -e 0x100000 +flash.bin: MKIMAGEOUTPUT = flash.log + +flash.bin: spl/u-boot-spl.bin u-boot.itb FORCE +ifeq ($(SPL_DEPFILE_EXISTS),0) + $(call if_changed,mkimage) +endif +endif + else MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -T $(IMAGE_TYPE) -e $(CONFIG_SPL_TEXT_BASE)
Signature · 1 line
2.14.1
PATCH v2 8/10 imx: build flash.bin for i.MX8
Quoted 2 lines
Build flash.bin for i.MX8 when SPL enabled.
Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 9/10 imx8qxp: mek: default enable SPL
In reply to Peng FanEnable SPL for i.MX8QXP MEK, and currently use SPL FIT. The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK.
Note: SPL FIT could not support secure boot chain, because i.MX8/8X only support i.MX container format. This container format has not been upstreamed, so we use FIT for now. When SPL container supported, we could switch to that.
--- board/freescale/imx8qxp_mek/Makefile | 1 + board/freescale/imx8qxp_mek/imximage.cfg | 4 +- board/freescale/imx8qxp_mek/spl.c | 75 ++++++++++++++++++++++++++++++++ configs/imx8qxp_mek_defconfig | 24 ++++++++++ include/configs/imx8qxp_mek.h | 26 +++++++++++ 5 files changed, 127 insertions(+), 3 deletions(-) create mode 100644 board/freescale/imx8qxp_mek/spl.c
board/freescale/imx8qxp_mek/Makefile +1 -0
@@ -5,3 +5,4 @@ # obj-y += imx8qxp_mek.o +obj-$(CONFIG_SPL_BUILD) += spl.o
board/freescale/imx8qxp_mek/imximage.cfg +1 -3
@@ -19,6 +19,4 @@ CONTAINER /* Add scfw image with exec attribute */ IMAGE SCU mx8qx-mek-scfw-tcm.bin /* Add ATF image with exec attribute */ -IMAGE A35 bl31.bin 0x80000000 -/* Add U-Boot image with load attribute */ -DATA A35 u-boot-dtb.bin 0x80020000 +IMAGE A35 spl/u-boot-spl.bin 0x00100000
board/freescale/imx8qxp_mek/spl.c new file +75 -0
75 lines not on this page · raw message
configs/imx8qxp_mek_defconfig +24 -0
@@ -1,11 +1,28 @@ CONFIG_ARM=y CONFIG_ARCH_IMX8=y CONFIG_SYS_TEXT_BASE=0x80020000 +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_TARGET_IMX8QXP_MEK=y +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y +CONFIG_SPL=y CONFIG_NR_DRAM_BANKS=3 +CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh" +CONFIG_FIT=y +CONFIG_SPL_LOAD_FIT=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qxp_mek/imximage.cfg" CONFIG_BOOTDELAY=3 +CONFIG_LOG=y +CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_SYS_MALLOC_SIMPLE=y +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_POWER_SUPPORT=y +CONFIG_SPL_POWER_DOMAIN=y +CONFIG_SPL_WATCHDOG_SUPPORT=y CONFIG_CMD_CPU=y # CONFIG_CMD_IMPORTENV is not set CONFIG_CMD_CLK=y
@@ -18,8 +35,11 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_FAT=y +CONFIG_SPL_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-mek" CONFIG_ENV_IS_IN_MMC=y +CONFIG_SPL_DM=y +CONFIG_SPL_CLK=y CONFIG_CLK_IMX8=y CONFIG_CPU=y CONFIG_DM_GPIO=y
@@ -41,12 +61,16 @@ CONFIG_FEC_MXC_MDIO_BASE=0x5B040000 CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8=y CONFIG_POWER_DOMAIN=y CONFIG_IMX8_POWER_DOMAIN=y CONFIG_DM_REGULATOR=y +CONFIG_SPL_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_SPL_DM_REGULATOR_GPIO=y CONFIG_DM_SERIAL=y CONFIG_FSL_LPUART=y +CONFIG_SPL_TINY_MEMSET=y # CONFIG_EFI_LOADER is not set
include/configs/imx8qxp_mek.h +26 -0
@@ -9,6 +9,32 @@#include <linux/sizes.h> #include <asm/arch/imx-regs.h> +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_TEXT_BASE 0x0 +#define CONFIG_SPL_MAX_SIZE (124 * 1024) +#define CONFIG_SYS_MONITOR_LEN (1024 * 1024) +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x250 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 0 + +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_STACK 0x013E000 +#define CONFIG_SPL_BSS_START_ADDR 0x00128000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x1000/* 4 KB */ +#define CONFIG_SYS_SPL_MALLOC_START 0x00120000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x3000/* 12 KB */ +#define CONFIG_SERIAL_LPUART_BASE 0x5a060000 +#define CONFIG_SYS_ICACHE_OFF +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_MALLOC_F_ADDR 0x00120000 + +#define CONFIG_SPL_RAW_IMAGE_ARM_TRUSTED_FIRMWARE + +#define CONFIG_SPL_ABORT_ON_RAW_IMAGE + +#define CONFIG_OF_EMBED +#endif +#define CONFIG_REMAKE_ELF #define CONFIG_BOARD_EARLY_INIT_F
Signature · 1 line
2.14.1
PATCH v2 9/10 imx8qxp: mek: default enable SPL
Quoted 7 lines
Enable SPL for i.MX8QXP MEK, and currently use SPL FIT. The SPL enable
SPL_DMto use MMC/PINCTRL/POWER DOMAIN/CLK.
Note: SPL FIT could not support secure boot chain, because i.MX8/8X only support i.MX container format. This container format has not been upstreamed, so we use FIT for now. When SPL container supported, we could switch to that.Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
PATCH v2 10/10 imx8qxp: mek: update README
In reply to Peng FanUpdate README after we switch to use SPL
--- board/freescale/imx8qxp_mek/README | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
board/freescale/imx8qxp_mek/README +5 -3
@@ -39,16 +39,18 @@ $ cp imx-sc-firmware-0.7/mx8qx-mek-scfw-tcm.bin . Build U-Boot ============ - +$ export ATF_LOAD_ADDR=0x80000000 +$ export BL33_LOAD_ADDR=0x80020000 $ make imx8qxp_mek_defconfig -$ make +$ make flash.bin +$ dd if=u-boot.itb of=flash.bin bs=512 seek=528 Flash the binary into the SD card ================================= Burn the flash.bin binary to SD card offset 32KB: -$ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=1024 seek=32 +$ sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 Boot ====
Signature · 1 line
2.14.1
PATCH v2 10/10 imx8qxp: mek: update README
Quoted 2 lines
Update README after we switch to use SPL
Signed-off-by Peng Fan <[email protected]>
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================