Various convenience fixes
cover Various convenience fixes
As I found myself using kvmtool more often in the last weeks, I got more and more annoyed by some smaller "ticks" that kvmtool shows.
So this is an attempt to post various smaller fixes I gathered up over the years, but never found worth enough to send out:
- drop unnecessarily detailed debug output
- add /chosen/stdout-path node in .dtb
- honour make -s switch
- remove pointless kvmtool version number
- improve meaningless PMU error message
- introduce autodetection of supported GIC type
Please have a look!
Cheers,
Andre.
Andre Przywara (6):
arm: turn pr_info() into pr_debug() messages
arm: fdt: add stdout-path to /chosen node
Makefile: support -s switch
Makefile: Remove echoing of kvmtools version file
arm: pmu: Improve PMU error reporting
arm: Auto-detect guest GIC type
Makefile | 16 +++++++++++++++- arm/fdt.c | 3 ++- arm/gic.c | 25 +++++++++++++++++++++++++ arm/include/arm-common/gic.h | 1 + arm/kvm.c | 16 ++++++++-------- arm/pmu.c | 2 +- util/KVMTOOLS-VERSION-GEN | 1 - virtio/mmio.c | 3 ++- 8 files changed, 54 insertions(+), 13 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/6 arm: turn pr_info() into pr_debug() messages
For whatever reason on ARM/arm64 machines kvmtool greets us with quite some elaborate messages:
Info: Loaded kernel to 0x80080000 (18704896 bytes)
Info: Placing fdt at 0x8fe00000 - 0x8fffffff
Info: virtio-mmio.devices=0x200@0x10000:36
Info: virtio-mmio.devices=0x200@0x10200:37
Info: virtio-mmio.devices=0x200@0x10400:38
This is not really useful information for the casual user, so change those lines to use pr_debug().
This also fixes the long standing line ending issue for the mmio output.
--- arm/fdt.c | 2 +- arm/kvm.c | 16 ++++++++-------- virtio/mmio.c | 3 ++- 3 files changed, 11 insertions(+), 10 deletions(-)
arm/fdt.c +1 -1
@@ -36,7 +36,7 @@ static void dump_fdt(const char *dtb_file, void *fdt)if (count <0 )die_perror ("Failed to dump dtb" ); -pr_info ("Wrote %d bytes to dtb %s\n" , count, dtb_file); +pr_debug ("Wrote %d bytes to dtb %s" , count, dtb_file);close (fd); }
arm/kvm.c +8 -8
@@ -113,8 +113,8 @@ bool kvm__arch_load_kernel_image(struct kvm *kvm, int fd_kernel, int fd_initrd,die_perror ("kernel read" ); } kernel_end = pos + file_size; -pr_info ("Loaded kernel to 0x%llx (%zd bytes)" , - kvm->arch.kern_guest_start, file_size); +pr_debug ("Loaded kernel to 0x%llx (%zd bytes)" , + kvm->arch.kern_guest_start, file_size);/* * Now load backwards from the end of memory so the kernel
@@ -129,9 +129,9 @@ bool kvm__arch_load_kernel_image(struct kvm *kvm, int fd_kernel, int fd_initrd,die ("fdt overlaps with kernel image." ); kvm->arch.dtb_guest_start = guest_addr; -pr_info ("Placing fdt at 0x%llx - 0x%llx" , - kvm->arch.dtb_guest_start, -host_to_guest_flat (kvm, limit)); +pr_debug ("Placing fdt at 0x%llx - 0x%llx" , + kvm->arch.dtb_guest_start, +host_to_guest_flat (kvm, limit)); limit = pos;/* ... and finally the initrd, if we have one. */
@@ -159,9 +159,9 @@ bool kvm__arch_load_kernel_image(struct kvm *kvm, int fd_kernel, int fd_initrd, kvm->arch.initrd_guest_start = initrd_start; kvm->arch.initrd_size = file_size; -pr_info ("Loaded initrd to 0x%llx (%llu bytes)" , - kvm->arch.initrd_guest_start, - kvm->arch.initrd_size); +pr_debug ("Loaded initrd to 0x%llx (%llu bytes)" , + kvm->arch.initrd_guest_start, + kvm->arch.initrd_size); }else { kvm->arch.initrd_size =0 ; }
virtio/mmio.c +2 -1
@@ -307,7 +307,8 @@ int virtio_mmio_init(struct kvm *kvm, void *dev, struct virtio_device *vdev,* * virtio_mmio.devices=0x200@0xd2000000:5,0x200@0xd2000200:6 */ -pr_info ("virtio-mmio.devices=0x%x@0x%x:%d\n" ,VIRTIO_MMIO_IO_SIZE , vmmio->addr, vmmio->irq); +pr_debug ("virtio-mmio.devices=0x%x@0x%x:%d" ,VIRTIO_MMIO_IO_SIZE , + vmmio->addr, vmmio->irq);return 0 ; }
Signature · 1 line
2.17.1
PATCH 2/6 arm: fdt: add stdout-path to /chosen node
In reply to Andre PrzywaraThe DT spec describes the stdout-path property in the /chosen node to contain the DT path for a default device usable for outputting characters. The Linux kernel uses this for earlycon (without further parameters), other DT users might rely on this as well.
Add a property containing the path to our emulated 8250 serial device.
Even when we use the virtio console, the serial console is still there and works, so we can expose this unconditionally. Putting the virtio console path in there will not work anyway.
--- arm/fdt.c | 1 + 1 file changed, 1 insertion(+)
arm/fdt.c +1 -0
@@ -143,6 +143,7 @@ static int setup_fdt(struct kvm *kvm)_FDT (fdt_property_cell (fdt,"linux,pci-probe-only" ,1 ));_FDT (fdt_property_string (fdt,"bootargs" , kvm->cfg.real_cmdline));_FDT (fdt_property_u64 (fdt,"kaslr-seed" , kvm->cfg.arch.kaslr_seed)); +_FDT (fdt_property_string (fdt,"stdout-path" ,"/U6_16550A@3f8" ));/* Initrd */ if (kvm->arch.initrd_size !=0 ) {
Signature · 1 line
2.17.1
Re: [PATCH kvmtool 2/6] arm: fdt: add stdout-path to /chosen node
Quoted 21 lines · Andre Przywara
The DT spec describes the stdout-path property in the /chosen node to contain the DT path for a default device usable for outputting characters. The Linux kernel uses this for earlycon (without further parameters), other DT users might rely on this as well.
Add a property containing the path to our emulated 8250 serial device.
Even when we use the virtio console, the serial console is still there and works, so we can expose this unconditionally. Putting the virtio console path in there will not work anyway.
Signed-off-by Andre Przywara <[email protected]>--- arm/fdt.c | 1 + 1 file changed, 1 insertion(+)arm/fdt.c +0
-0
arm/fdt.c static int setup_fdt(struct kvm *kvm) · line 146
Quoted 4 lines
arm/fdt.c +1
-0@@ -143,6 +143,7 @@ static int setup_fdt(struct kvm *kvm)_FDT (fdt_property_cell (fdt,"linux,pci-probe-only" ,1 ));_FDT (fdt_property_string (fdt,"bootargs" , kvm->cfg.real_cmdline));_FDT (fdt_property_u64 (fdt,"kaslr-seed" , kvm->cfg.arch.kaslr_seed)); +_FDT (fdt_property_string (fdt,"stdout-path" ,"/U6_16550A@3f8" ));
Since the last string here has to match the one in hw/serial.c, I think we should be retrieving it from there rather than hardcoding it here.
Will
Re: [PATCH kvmtool 2/6] arm: fdt: add stdout-path to /chosen node
On Wed, 30 Jan 2019 18:20:19 +0000
Will Deacon <[email protected]> wrote:
Hi,
Quoted 18 lines · Andre Przywara
Quoted 17 lines
The DT spec describes the stdout-path property in the /chosen node to contain the DT path for a default device usable for outputting characters. The Linux kernel uses this for earlycon (without further parameters), other DT users might rely on this as well.
Add a property containing the path to our emulated 8250 serial device.
Even when we use the virtio console, the serial console is still there and works, so we can expose this unconditionally. Putting the virtio console path in there will not work anyway.
Signed-off-by Andre Przywara <[email protected]>--- arm/fdt.c | 1 + 1 file changed, 1 insertion(+)
Quoted 15 lines
arm/fdt.c static int setup_fdt(struct kvm *kvm) · line 148
Quoted 11 lines
arm/fdt.c +1
-0@@ -143,6 +143,7 @@ static int setup_fdt(struct kvm *kvm)_FDT (fdt_property_cell (fdt,"linux,pci-probe-only" ,1 ));_FDT (fdt_property_string (fdt,"bootargs" , kvm->cfg.real_cmdline));_FDT (fdt_property_u64 (fdt,"kaslr-seed" , kvm->cfg.arch.kaslr_seed)); +_FDT (fdt_property_string (fdt,"stdout-path" ,"/U6_16550A@3f8" ));Since the last string here has to match the one in
hw/serial.c, I think we should be retrieving it from there rather than hardcoding it here.
Are you thinking about something like setting a "char *primary_console_path" in hw/serial.c:serial8250_generate_fdt_node(), then using this here in arm/fdt.c?
Or shall the generate function directly set the stdout-path?
Cheers,
Andre.
Re: [PATCH kvmtool 2/6] arm: fdt: add stdout-path to /chosen node
Quoted 36 lines · Andre Przywara
Quoted 18 lines · On Wed, 30 Jan 2019 18:20:19 +0000 Will Deacon <[email protected]> wrote:
Quoted 17 lines · Andre Przywara
The DT spec describes the stdout-path property in the /chosen node to contain the DT path for a default device usable for outputting characters. The Linux kernel uses this for earlycon (without further parameters), other DT users might rely on this as well.
Add a property containing the path to our emulated 8250 serial device.
Even when we use the virtio console, the serial console is still there and works, so we can expose this unconditionally. Putting the virtio console path in there will not work anyway.
Signed-off-by Andre Przywara <[email protected]>--- arm/fdt.c | 1 + 1 file changed, 1 insertion(+)Quoted 15 lines
arm/fdt.c static int setup_fdt(struct kvm *kvm) · line 148
Quoted 11 lines
arm/fdt.c +1
-0@@ -143,6 +143,7 @@ static int setup_fdt(struct kvm *kvm)_FDT (fdt_property_cell (fdt,"linux,pci-probe-only" ,1 ));_FDT (fdt_property_string (fdt,"bootargs" , kvm->cfg.real_cmdline));_FDT (fdt_property_u64 (fdt,"kaslr-seed" , kvm->cfg.arch.kaslr_seed)); +_FDT (fdt_property_string (fdt,"stdout-path" ,"/U6_16550A@3f8" ));Since the last string here has to match the one in
hw/serial.c, I think we should be retrieving it from there rather than hardcoding it here.
Quoted 4 lines
Are you thinking about something like setting a "char
*primary_console_path" in hw/serial.c:serial8250_generate_fdt_node(), then using this here inarm/fdt.c?
Or shall the generate function directly set the stdout-path?
It's probably a bit dodgy doing it from the generate function, because I think we'd then be relying on the the /chosen node being created before the serial node (which is true, but I wouldn't like to rely on it).
So I think either have a way to register the primary console device, or a way to squirrel the string away somewhere. Is there a variant of stdout-path which uses a phandle instead of a string? That might end up being cleaner to implement.
Will
Re: [PATCH kvmtool 2/6] arm: fdt: add stdout-path to /chosen node
On Fri, 1 Feb 2019 06:26:58 +0000
Will Deacon <[email protected]> wrote:
Hi,
Quoted 44 lines · Andre Przywara
Quoted 37 lines
Quoted 19 lines · On Wed, 30 Jan 2019 18:20:19 +0000 Will Deacon <[email protected]> wrote:
Quoted 18 lines · Andre Przywara
The DT spec describes the stdout-path property in the /chosen node to contain the DT path for a default device usable for outputting characters. The Linux kernel uses this for earlycon (without further parameters), other DT users might rely on this as well.
Add a property containing the path to our emulated 8250 serial device.
Even when we use the virtio console, the serial console is still there and works, so we can expose this unconditionally. Putting the virtio console path in there will not work anyway.
Signed-off-by Andre Przywara <[email protected]>--- arm/fdt.c | 1 + 1 file changed, 1 insertion(+)Quoted 15 lines
arm/fdt.c static int setup_fdt(struct kvm *kvm) · line 148
Quoted 11 lines
arm/fdt.c +1
-0@@ -143,6 +143,7 @@ static int setup_fdt(struct kvm *kvm)_FDT (fdt_property_cell (fdt,"linux,pci-probe-only" ,1 ));_FDT (fdt_property_string (fdt,"bootargs" , kvm->cfg.real_cmdline));_FDT (fdt_property_u64 (fdt,"kaslr-seed" , kvm->cfg.arch.kaslr_seed)); +_FDT (fdt_property_string (fdt,"stdout-path" ,"/U6_16550A@3f8" ));Since the last string here has to match the one in
hw/serial.c, I think we should be retrieving it from there rather than hardcoding it here.Quoted 5 lines
Are you thinking about something like setting a "char
*primary_console_path" in hw/serial.c:serial8250_generate_fdt_node(), then using this here inarm/fdt.c? Or shall the generate function directly set the stdout-path?
Quoted 4 lines
It's probably a bit dodgy doing it from the generate function, because I think we'd then be relying on the the /chosen node being created before the serial node (which is true, but I wouldn't like to rely on it).
Agreed.
Quoted 4 lines
So I think either have a way to register the primary console device, or a way to squirrel the string away somewhere. Is there a variant of stdout-path which uses a phandle instead of a string? That might end up being cleaner to implement.
stdout-path must be a string, so a phandle will not work. However that string can be an alias, so I now let stdout-path always be "serial0", then add an aliases node at the end of the FDT generation, assigning serial0 to the path of the first instantiated serial device.
I will post a v2 with that.
Cheers,
Andre.
PATCH 3/6 Makefile: support -s switch
In reply to Andre Przywara"make -s" suppresses normal output, just shows warnings and errors. But since we explicitly override the make output with our fancy concise version, we miss out on this feature.
Do as the kernel does and explicitly suppress every normal output when -s is given. This helps to spot warnings that scroll out of the terminal window too quickly.
--- Makefile | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
Makefile +15 -1
@@ -2,8 +2,22 @@ # Define WERROR=0 to disable -Werror. # +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + silent=1 +endif +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + silent=1 +endif +endif + ifeq ($(strip $(V)),) - E = @echo + ifeq ($(silent),) + E = @echo + else + E = @\# + endif Q = @ else E = @\#
Signature · 1 line
2.17.1
Re: [PATCH kvmtool 3/6] Makefile: support -s switch
Quoted 20 lines · Andre Przywara
"make -s" suppresses normal output, just shows warnings and errors. But since we explicitly override the make output with our fancy concise version, we miss out on this feature.
Do as the kernel does and explicitly suppress every normal output when -s is given. This helps to spot warnings that scroll out of the terminal window too quickly.
Signed-off-by Andre Przywara <[email protected]>--- Makefile | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)Makefile +0
-0@@ -2,8 +2,22 @@ # Define WERROR=0 to disable -Werror. #
Makefile line 13
Quoted 10 lines
Makefile +9
-0+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + silent=1 +endif +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + silent=1 +endif +endif
Why do we need to do this differently for different versions of Make? afaict, the kernel manages this using findstring and filter-out.
Will
Re: [PATCH kvmtool 3/6] Makefile: support -s switch
On Wed, 30 Jan 2019 18:20:28 +0000
Will Deacon <[email protected]> wrote:
Hi Will,
thanks for having a look!
Quoted 22 lines · Andre Przywara
Quoted 21 lines
"make -s" suppresses normal output, just shows warnings and errors. But since we explicitly override the make output with our fancy concise version, we miss out on this feature.
Do as the kernel does and explicitly suppress every normal output when -s is given. This helps to spot warnings that scroll out of the terminal window too quickly.
Signed-off-by Andre Przywara <[email protected]>--- Makefile | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)Makefile +0
-0@@ -2,8 +2,22 @@ # Define WERROR=0 to disable -Werror. #
Quoted 12 lines
Makefile line 13
Quoted 9 lines
Makefile +9
-0+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + silent=1 +endif +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + silent=1 +endif +endifWhy do we need to do this differently for different versions of Make? afaict, the kernel manages this using findstring and filter-out.
Indeed, thanks for the heads up, this was a Linux change in 2017, after I originally made this patch.
I changed it now to the new version and checked that it also works on make 3.8.
Cheers,
Andre.
PATCH 4/6 Makefile: Remove echoing of kvmtools version file
In reply to Andre PrzywaraOn every build we report the kvmtool "version" number, which isn't meaningful at all anymore.
Remove the line from the KVMTOOLS-VERSION-GEN script to drop a pointless message.
--- util/KVMTOOLS-VERSION-GEN | 1 - 1 file changed, 1 deletion(-)
util/KVMTOOLS-VERSION-GEN +0 -1
@@ -35,6 +35,5 @@ else VC=unset fi test "$VN" = "$VC" || { - echo >&2 "KVMTOOLS_VERSION = $VN" echo "KVMTOOLS_VERSION = $VN" >$GVF }
Signature · 1 line
2.17.1
Re: [PATCH kvmtool 4/6] Makefile: Remove echoing of kvmtools version file
Quoted 16 lines · Andre Przywara
On every build we report the kvmtool "version" number, which isn't meaningful at all anymore.
Remove the line from the KVMTOOLS-VERSION-GEN script to drop a pointless message.
Signed-off-by Andre Przywara <[email protected]>--- util/KVMTOOLS-VERSION-GEN | 1 - 1 file changed, 1 deletion(-)util/KVMTOOLS-VERSION-GEN +0
-0
util/KVMTOOLS-VERSION-GEN else · line 38
Quoted 5 lines
util/KVMTOOLS-VERSION-GEN +0
-1@@ -35,6 +35,5 @@ else VC=unset fi test "$VN" = "$VC" || { - echo >&2 "KVMTOOLS_VERSION = $VN" echo "KVMTOOLS_VERSION = $VN" >$GVF
It's probably fine, but can you check this doesn't break the debian packaging please?
Will
Re: [PATCH kvmtool 4/6] Makefile: Remove echoing of kvmtools version file
Quoted 12 lines · On Wed, 30 Jan 2019 18:20:36 +0000 Will Deacon <[email protected]> wrote:
Quoted 11 lines · Andre Przywara
On every build we report the kvmtool "version" number, which isn't meaningful at all anymore.
Remove the line from the KVMTOOLS-VERSION-GEN script to drop a pointless message.
Signed-off-by Andre Przywara <[email protected]>--- util/KVMTOOLS-VERSION-GEN | 1 - 1 file changed, 1 deletion(-)
Quoted 13 lines
util/KVMTOOLS-VERSION-GEN else · line 38
Quoted 10 lines
util/KVMTOOLS-VERSION-GEN +0
-1@@ -35,6 +35,5 @@ else VC=unset fi test "$VN" = "$VC" || { - echo >&2 "KVMTOOLS_VERSION = $VN" echo "KVMTOOLS_VERSION = $VN" >$GVFIt's probably fine, but can you check this doesn't break the debian packaging please?
Debian uses some date-based versioning (0.20170904-1) for kvmtool. I built it with debuild and this patch in the patches directory, that seemed to be fine (from my rather clueless Debian packaging point of view, at least).
Cheers,
Andre.
PATCH 5/6 arm: pmu: Improve PMU error reporting
In reply to Andre PrzywaraThe KVM ioctls mostly just return -1 in the error case, leaving the actual error code in errno.
Change the output of the PMU error message to actually print this error code instead of the generic -1.
--- arm/pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arm/pmu.c +1 -1
@@ -18,7 +18,7 @@ static int set_pmu_attr(struct kvm *kvm, int vcpu_idx,if (!ret) { ret =ioctl (fd,KVM_SET_DEVICE_ATTR , attr);if (ret) -pr_err ("PMU KVM_SET_DEVICE_ATTR failed (%d)\n" , ret); +perror ("PMU KVM_SET_DEVICE_ATTR failed" ); }else {pr_err ("Unsupported PMU on vcpu%d\n" , vcpu_idx); }
Signature · 1 line
2.17.1
PATCH 6/6 arm: Auto-detect guest GIC type
In reply to Andre PrzywaraAt the moment kvmtool always tries to instantiate a virtual GICv2 for the guest, and fails with some scary error message if that doesn't work. The user has then to manually specify "--irqchip=gicv3", which is not really obvious.
With the advent of more GICv3-only machines, let's try to be more clever and implement some auto-detection of the GIC type needed:
- We try GICv3 first. On GICv3-only hosts this will be the only working option, so we don't loose anything. On GICv2-backwards compatible GICv3 machines GICv3 is probably the better choice these days.
- If that fails, we try GICv2.
- If that fails, we ran out out options and bail out.
We deduce the choice between "ITS vs. pure GICv3" and "GICv2m vs. GICv2" by the presence of PCI devices, they would be the only MSI users anyway.
This algorithm is in effect is there is no explicit --irqchip parameter on the command line. We still allow the GIC type to be set explicitly.
--- arm/gic.c | 25 +++++++++++++++++++++++++ arm/include/arm-common/gic.h | 1 + 2 files changed, 26 insertions(+)
arm/gic.c +25 -0
@@ -182,6 +182,8 @@ static int gic__create_device(struct kvm *kvm, enum irqchip_type type) gic_device.type =KVM_DEV_TYPE_ARM_VGIC_V3 ; dist_attr.attr =KVM_VGIC_V3_ADDR_TYPE_DIST ;break ; +case IRQCHIP_AUTO : +return -ENODEV ; } err =ioctl (kvm->vm_fd,KVM_CREATE_DEVICE , &gic_device);
@@ -199,6 +201,8 @@ static int gic__create_device(struct kvm *kvm, enum irqchip_type type)case IRQCHIP_GICV3 : err =ioctl (gic_fd,KVM_SET_DEVICE_ATTR , &redist_attr);break ; +case IRQCHIP_AUTO : +return -ENODEV ; }if (err) goto out_err;
@@ -249,9 +253,30 @@ static int gic__create_irqchip(struct kvm *kvm)int gic__create (struct kvm *kvm,enum irqchip_type type) { +enum irqchip_type try; +bool needs_msis;int err;switch (type) { +case IRQCHIP_AUTO : + needs_msis = kvm->cfg.arch.virtio_trans_pci; +if (needs_msis) + try =IRQCHIP_GICV3_ITS ; +else + try =IRQCHIP_GICV3 ; + err =gic__create (kvm, try); +if (!err) { + kvm->cfg.arch.irqchip = try; +return 0 ; + } +if (needs_msis) + try =IRQCHIP_GICV2M ; +else + try =IRQCHIP_GICV2 ; + err =gic__create (kvm, try); +if (!err) + kvm->cfg.arch.irqchip = try; +return err;case IRQCHIP_GICV2M : gic_msi_size =KVM_VGIC_V2M_SIZE ; gic_msi_base =ARM_GIC_CPUI_BASE - gic_msi_size;
arm/include/arm-common/gic.h +1 -0
@@ -24,6 +24,7 @@#define KVM_VGIC_V2M_SIZE 0x1000enum irqchip_type { +IRQCHIP_AUTO ,IRQCHIP_GICV2 ,IRQCHIP_GICV2M ,IRQCHIP_GICV3 ,
Signature · 1 line
2.17.1
Re: [PATCH kvmtool 6/6] arm: Auto-detect guest GIC type
Quoted 9 lines · Andre Przywara
At the moment kvmtool always tries to instantiate a virtual GICv2 for the guest, and fails with some scary error message if that doesn't work. The user has then to manually specify "--irqchip=gicv3", which is not really obvious.
With the advent of more GICv3-only machines, let's try to be more clever and implement some auto-detection of the GIC type needed:
- We try GICv3 first. On GICv3-only hosts this will be the only working option, so we don't loose anything. On GICv2-backwards compatible GICv3 machines GICv3 is probably the better choice these days.
Could you elaborate on "probably the better choice" please?
Quoted 5 lines
- If that fails, we try GICv2.
- If that fails, we ran out out options and bail out.We deduce the choice between "ITS vs. pure GICv3" and "GICv2m vs. GICv2" by the presence of PCI devices, they would be the only MSI users anyway.
This feels really flakey. Why don't we just try, in order:
v3 + ITS
v3
v2m
v2
regardless of the VM configuration?
Will
Re: [PATCH kvmtool 6/6] arm: Auto-detect guest GIC type
Quoted 12 lines · On Wed, 30 Jan 2019 18:20:46 +0000 Will Deacon <[email protected]> wrote:
Quoted 10 lines · Andre Przywara
At the moment kvmtool always tries to instantiate a virtual GICv2 for the guest, and fails with some scary error message if that doesn't work. The user has then to manually specify "--irqchip=gicv3", which is not really obvious.
With the advent of more GICv3-only machines, let's try to be more clever and implement some auto-detection of the GIC type needed:
- We try GICv3 first. On GICv3-only hosts this will be the only working option, so we don't loose anything. On GICv2-backwards compatible GICv3 machines GICv3 is probably the better choice these days.
Quoted 1 line
Could you elaborate on "probably the better choice" please?
When we introduced the GICv3 emulation and the kvmtool support, it was deemed less mature than the GICv2 support. This was one of the reasons we were happy with GICv2-on-v3 as the default. Now with GICv3 support being stable, we should use the advantages like the system register interface.
Quoted 7 lines
Quoted 6 lines
- If that fails, we try GICv2.
- If that fails, we ran out out options and bail out.We deduce the choice between "ITS vs. pure GICv3" and "GICv2m vs. GICv2" by the presence of PCI devices, they would be the only MSI users anyway.
Quoted 6 lines
This feels really flakey. Why don't we just try, in order:
v3 + ITS
v3
v2m
v2
I think v2m will fail only rarely (doesn't rely on any kernel support), so in practise we will likely never get a "pure" GICv2. But since we always have the --irqchip option to override this, that's probably OK.
Will change it to that effect.
Cheers,
Andre.
Quoted 6 lines · Andre Przywara
As I found myself using kvmtool more often in the last weeks, I got more and more annoyed by some smaller "ticks" that kvmtool shows.
So this is an attempt to post various smaller fixes I gathered up over the years, but never found worth enough to send out:
Quoted 6 lines
- drop unnecessarily detailed debug output
- add /chosen/stdout-path node in .dtb
- honour make -s switch
- remove pointless kvmtool version number
- improve meaningless PMU error message
- introduce autodetection of supported GIC type
I've applied (1) and (5), leaving comments on the others.
Cheers,
Will