Skip to contentSkip to conversation

rpi: add Compute Module 3+

PATCH New Jonathan Gray 2 participants 2 messages Jan 30, 2019 – Feb 14, 2019 Broadcom BCM2711/BCM2835 Arm architecture

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 rpi: add Compute Module 3+

Add Raspberry Pi Compute Module 3+ to list of models, the revision code is 0x10 according to the list on raspberrypi.org.

v2: Use the same dtb name as CM3 as CM3+ is a drop in replacement
for CM3.

---
 board/raspberrypi/rpi/rpi.c | 5 +++++
 1 file changed, 5 insertions(+)
board/raspberrypi/rpi/rpi.c +5 -0
index 153a1fdcb7..617c892dde 100644
@@ -143,6 +143,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
 		DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
 		false,
 	},
+	[0x10] = {
+		"Compute Module 3+",
+		DTB_DIR "bcm2837-rpi-cm3.dtb",
+		false,
+	},
 };
 
 static const struct rpi_model rpi_models_old_scheme[] = {
Signature · 1 line
2.20.1
#1 lore raw

PATCH v2 1/1 rpi: add Compute Module 3+

Quoted 7 lines · Jonathan Gray

Add Raspberry Pi Compute Module 3+ to list of models, the revision code is 0x10 according to the list on raspberrypi.org.

v2: Use the same dtb name as CM3 as CM3+ is a drop in replacement
for CM3.

Alex

Quoted 21 lines
---
 board/raspberrypi/rpi/rpi.c | 5 +++++
 1 file changed, 5 insertions(+)
board/raspberrypi/rpi/rpi.c +5 -0
index 153a1fdcb7..617c892dde 100644
@@ -143,6 +143,11 @@ static const struct rpi_model rpi_models_new_scheme[] = {
 		DTB_DIR "bcm2837-rpi-3-a-plus.dtb",
 		false,
 	},
+	[0x10] = {
+		"Compute Module 3+",
+		DTB_DIR "bcm2837-rpi-cm3.dtb",
+		false,
+	},
 };
 
 static const struct rpi_model rpi_models_old_scheme[] = {