Skip to contentSkip to conversation

mips: mt76xx: Use correct timer frequency

PATCH New Stefan Roese 2 participants 2 messages Jan 31, 2019 – Feb 1, 2019 Arm MediaTek

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 mips: mt76xx: Use correct timer frequency

Testing has shown that the timer on the MT7688 platforms does not run correctly (too fast timeout). This patch changes CONFIG_SYS_MIPS_TIMER_FREQ from 200MHz to 290MHz which is the correct value, as its also used in Linux.

Cc Daniel Schwierzeck <[email protected]>
---
 include/configs/gardena-smart-gateway-mt7688.h | 2 +-
 include/configs/linkit-smart-7688.h            | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
include/configs/gardena-smart-gateway-mt7688.h +1 -1
index b10857a757..b3b89d2ab9 100644
@@ -7,7 +7,7 @@
 #define __CONFIG_GARDENA_SMART_GATEWAY_H
 
 /* CPU */
-#define CONFIG_SYS_MIPS_TIMER_FREQ	200000000
+#define CONFIG_SYS_MIPS_TIMER_FREQ	290000000
 
 /* RAM */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
include/configs/linkit-smart-7688.h +1 -1
index 3bae92d0ee..2adf38545a 100644
@@ -7,7 +7,7 @@
 #define __CONFIG_LINKIT_SMART_7688_H
 
 /* CPU */
-#define CONFIG_SYS_MIPS_TIMER_FREQ	200000000
+#define CONFIG_SYS_MIPS_TIMER_FREQ	290000000
 
 /* RAM */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
Signature · 1 line
2.20.1
#1 lore raw

PATCH 1/1 mips: mt76xx: Use correct timer frequency

Am 31.01.19 um 07:24 schrieb Stefan Roese:

Quoted 5 lines

Testing has shown that the timer on the MT7688 platforms does not run correctly (too fast timeout). This patch changes CONFIG_SYS_MIPS_TIMER_FREQ from 200MHz to 290MHz which is the correct value, as its also used in Linux.

Quoted 7 lines
Cc Daniel Schwierzeck <[email protected]>
---
 include/configs/gardena-smart-gateway-mt7688.h | 2 +-
 include/configs/linkit-smart-7688.h            | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

applied to u-boot-mips, thanks.

Signature · 1 line
- Daniel