arm: dts: am33xx: add u-boot, dm-spl to ocp bus
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")
Due to this the brppt1_spi board is broken because it cannot bind/probe the spi-interface during SPL stage.
This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
---
arch/arm/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm/dts/am33xx.dtsi +1 -0
@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
Signature · 1 line
2.7.4
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Quoted 25 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+)arch/arm/dts/am33xx.dtsi +0
-0
arch/arm/dts/am33xx.dtsi line 166
Quoted 7 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;
We need to put this into one of the -u-boot.dtsi files and then #include it from the others, so that we don't keep dropping this flag. Thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190131/4f947100/attachment.sig>
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+)
Quoted 14 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include it from the others, so that we don't keep dropping this flag. Thanks!
Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid label like other elements.
So we have at least to adjust the am33xx.dtsi file like this:
ocp : ocp {
compatible = "simple-bus";
.....
}
what do you suggest ?
cheers,
Hannes
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Quoted 42 lines · Hannes Schmelzer
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+)Quoted 14 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include it from the others, so that we don't keep dropping this flag. Thanks!Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid label like other elements.
So we have at least to adjust theam33xx.dtsifile like this:
Quoted 6 lines
ocp : ocp {
compatible = "simple-bus";
.....
}what do you suggest ?
Er, with the example of arch/arm/dts/am335x-pdu001-u-boot.dtsi should't we be able to just do that, globally? Or is that part _not_ working and relied on the now removed hunk?
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190131/54be7af8/attachment.sig>
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Quoted 49 lines · Tom Rini
Quoted 47 lines · Hannes Schmelzer
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+)Quoted 14 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include it from the others, so that we don't keep dropping this flag. Thanks!Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid label like other elements.
So we have at least to adjust theam33xx.dtsifile like this:ocp : ocp {
compatible = "simple-bus";
.....
}
Quoted 4 lines
Quoted 1 line
what do you suggest ?
Er, with the example of
arch/arm/dts/am335x-pdu001-u-boot.dtsishould't we be able to just do that, globally? Or is that part _not_ working and relied on the now removed hunk?
Hi Tom,
I'll verify this tomorrow. But the pdu001 looks good to me. This would be a solution for my boards too if it does the job. Keep you up to date.
cheers,
Hannes
Quoted 1 line
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Quoted 51 lines · Hannes Schmelzer
Quoted 49 lines · Tom Rini
Quoted 47 lines · Hannes Schmelzer
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+)Quoted 14 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include it from the others, so that we don't keep dropping this flag. Thanks!Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid label like other elements.
So we have at least to adjust theam33xx.dtsifile like this:ocp : ocp {
compatible = "simple-bus";
.....
}
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
what do you suggest ?
Er, with the example of
arch/arm/dts/am335x-pdu001-u-boot.dtsishould't we be able to just do that, globally? Or is that part _not_ working and relied on the now removed hunk?Hi Tom,
I'll verify this tomorrow. But the pdu001 looks good to me. This would be a solution for my boards too if it does the job. Keep you up to date.
Thanks. Just keep in mind that if it works, we need am33xx-u-boot.dtsi with that, so it unbreaks all the SoC.
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190131/674f451b/attachment.sig>
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
In reply to Hannes SchmelzerHi Hannes,
Quoted 53 lines · Hannes Schmelzer
Quoted 51 lines · Tom Rini
Quoted 49 lines · Hannes Schmelzer
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi| 1 +1 file changed, 1 insertion(+)Quoted 15 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include
it from the others, so that we don't keep dropping this flag. Thanks!Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid
label like other elements.
So we have at least to adjust theam33xx.dtsifile like this:ocp : ocp {
compatible = "simple-bus";
.....
}
Quoted 9 lines
Quoted 4 lines
Quoted 1 line
what do you suggest ?
Er, with the example of
arch/arm/dts/am335x-pdu001-u-boot.dtsishould't we be able to just do that, globally? Or is that part _not_ working and relied on the now removed hunk?Hi Tom,
I'll verify this tomorrow. But the pdu001 looks good to me. This would be a solution for my boards too if it does the job. Keep you up to date.
Please CC me if you fix this by a patch adding a am33xx-u-boot.dtsi file.
regards Felix
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Quoted 64 lines · Felix Brack
Hi Hannes,
Quoted 61 lines · Hannes Schmelzer
Quoted 51 lines · Tom Rini
Quoted 49 lines · Hannes Schmelzer
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi | 1 + 1 file changed, 1 insertion(+)Quoted 15 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include
it from the others, so that we don't keep dropping this flag. Thanks!Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid
label like other elements.
So we have at least to adjust theam33xx.dtsifile like this:ocp : ocp {
compatible = "simple-bus";
.....
}Quoted 4 lines
Quoted 1 line
what do you suggest ?
Er, with the example of
arch/arm/dts/am335x-pdu001-u-boot.dtsishould't we be able to just do that, globally? Or is that part _not_ working and relied on the now removed hunk?Hi Tom,
I'll verify this tomorrow. But the pdu001 looks good to me. This would be a solution for my boards too if it does the job. Keep you up to date.
Hi Tom, Felix,
my boards are now up/running again.
In fact the removed hunk really hurts all boards (which using dm in spl) with a few exceptions:
arch/arm/dts/am4372-generic-u-boot.dtsi: ocp { arch/arm/dts/am437x-idk-evm-u-boot.dtsi: ocp { arch/arm/dts/omap5-u-boot.dtsi: ocp { arch/arm/dts/am335x-pdu001-u-boot.dtsi: ocp { arch/arm/dts/am437x-gp-evm-u-boot.dtsi: ocp { arch/arm/dts/am437x-sk-evm-u-boot.dtsi: ocp {
Those do the trick within their own files, either with "u-boot,dm-spl;" or "u-boot,dm-pre-reloc;".
The ocp is in fact the root of all important peripheral, so they all have this within.
Some files do also add the necessary "u-boot,dm-spl;" flag to some other devices which are needed for bring up SPL.
I would suggest to have a "am33xx-u-boot.dtsi" which provides the ""u-boot,dm-spl;" or "u-boot,dm-pre-reloc;" (not sure which one is the formal correct one),
flag at least to the most important "ocp" and also to all devices from where the am335x can boot. Does anybody think that we may run into SPL size trouble,
with this little bigger dtb blob in spl ?
So maybe we can finish the discussion during next week and then i will provide a patch adding/using some "am33xx-uboot.dtsi" file.
Quoted 5 lines
Please CC me if you fix this by a patch adding a
am33xx-u-boot.dtsifile.regards Felix
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
Quoted 96 lines · Hannes Schmelzer
Quoted 64 lines · Felix Brack
Hi Hannes,
Quoted 61 lines · Hannes Schmelzer
Quoted 51 lines · Tom Rini
Quoted 49 lines · Hannes Schmelzer
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi| 1 +1 file changed, 1 insertion(+)Quoted 15 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include
it from the others, so that we don't keep dropping this flag. Thanks!Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid
label like other elements.
So we have at least to adjust theam33xx.dtsifile like this:ocp : ocp {
compatible = "simple-bus";
.....
}Quoted 4 lines
Quoted 1 line
what do you suggest ?
Er, with the example of
arch/arm/dts/am335x-pdu001-u-boot.dtsishould't we be able to just do that, globally? Or is that part _not_ working and relied on the now removed hunk?Hi Tom,
I'll verify this tomorrow. But the pdu001 looks good to me. This would be a solution for my boards too if it does the job. Keep you up to date.Hi Tom, Felix,
my boards are now up/running again.
In fact the removed hunk really hurts all boards (which using dm in spl) with a few exceptions:arch/arm/dts/am4372-generic-u-boot.dtsi: ocp { arch/arm/dts/am437x-idk-evm-u-boot.dtsi: ocp {
arch/arm/dts/omap5-u-boot.dtsi: ocp {arch/arm/dts/am335x-pdu001-u-boot.dtsi: ocp {arch/arm/dts/am437x-gp-evm-u-boot.dtsi: ocp {arch/arm/dts/am437x-sk-evm-u-boot.dtsi: ocp {Those do the trick within their own files, either with "u-boot,dm-spl;" or "u-boot,dm-pre-reloc;".
The ocp is in fact the root of all important peripheral, so they all have this within.
Some files do also add the necessary "u-boot,dm-spl;" flag to some other devices which are needed for bring up SPL.I would suggest to have a "
am33xx-u-boot.dtsi" which provides the ""u-boot,dm-spl;" or "u-boot,dm-pre-reloc;" (not sure which one is the formal correct one),
flag at least to the most important "ocp" and also to all devices from where the am335x can boot. Does anybody think that we may run into SPL size trouble,
with this little bigger dtb blob in spl ?
Quoted 2 lines
So maybe we can finish the discussion during next week and then i will provide a patch adding/using some "
am33xx-uboot.dtsi" file.
In this case, we want u-boot,dm-pre-reloc. To figure out which we would want in general, drivers/core/ofnode.c and drivers/core/util.c are easy to search for the few functions that check for "u-boot,dm-pre-reloc" as well as "u-boot,dm-spl" and "u-boot,dm-tpl". In all functions dm-pre-reloc is found in U-Boot, TPL and SPL while dm-spl/dm-tpl are found in their respective builds and full U-Boot but not their counterpart (ie u-boot,dm-tpl is true for TPL and U-Boot and false SPL). Thanks again!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190201/0acce5ca/attachment.sig>
PATCH 1/1 arm: dts: am33xx: add u-boot, dm-spl to ocp bus
In reply to Hannes SchmelzerHi Hannes,
Quoted 85 lines · Hannes Schmelzer
Quoted 66 lines · Felix Brack
Hi Hannes,
Quoted 63 lines · Hannes Schmelzer
Quoted 52 lines · Tom Rini
Quoted 50 lines · Hannes Schmelzer
Quoted 22 lines · Tom Rini
Quoted 20 lines · Hannes Schmelzer
commit
fdce9d35dc36("arm: dts: am33xx: Sync dts with Linux 4.20.0") did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was introduced with
commit19aa4ac09db9("dts: am33xx: add u-boot, dm-spl to ocp bus")Due to this the
brppt1_spiboard is broken because it cannot bind/probe the spi-interface during SPL stage.This commit adds this flag again.
This flag is needed for having access to the devices below this bus, most important is uart and boot-device (spi, mmc, ...) in SPL stage.
Signed-off-by Hannes Schmelzer <[email protected]>---
arch/arm/dts/am33xx.dtsi| 1 +1 file changed, 1 insertion(+)Quoted 16 lines
arch/arm/dts/am33xx.dtsi line 166
Quoted 12 lines
arch/arm/dts/am33xx.dtsi +1
-0@@ -160,6 +160,7 @@ * the whole bus hierarchy. */ ocp { + u-boot,dm-spl; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>;We need to put this into one of the
-u-boot.dtsifiles and then #include
it from the others, so that we don't keep dropping this flag. Thanks!Hi Tom,
i'm not sure if we can do that this way because the "ocp" bus has no valid
label like other elements.
So we have at least to adjust theam33xx.dtsifile like this:ocp : ocp {
compatible = "simple-bus";
.....
}Quoted 5 lines
Quoted 1 line
what do you suggest ?
Er, with the example of
arch/arm/dts/am335x-pdu001-u-boot.dtsishould't we be able to just do that, globally? Or is that part _not_ working and
relied on the now removed hunk?Hi Tom,
I'll verify this tomorrow. But the pdu001 looks good to me. This would be a solution for my boards too if it does the job. Keep you up to date.Hi Tom, Felix,
my boards are now up/running again.
In fact the removed hunk really hurts all boards (which using dm in spl) with a few exceptions:arch/arm/dts/am4372-generic-u-boot.dtsi: ocp { arch/arm/dts/am437x-idk-evm-u-boot.dtsi: ocp {
arch/arm/dts/omap5-u-boot.dtsi: ocp {arch/arm/dts/am335x-pdu001-u-boot.dtsi: ocp {arch/arm/dts/am437x-gp-evm-u-boot.dtsi: ocp {arch/arm/dts/am437x-sk-evm-u-boot.dtsi: ocp {Those do the trick within their own files, either with "u-boot,dm-spl;" or "u-boot,dm-pre-reloc;".
Quoted 8 lines
The ocp is in fact the root of all important peripheral, so they all have this within.
Some files do also add the necessary "u-boot,dm-spl;" flag to some other devices which are needed for bring up SPL.I would suggest to have a "
am33xx-u-boot.dtsi" which provides the ""u-boot,dm-spl;" or "u-boot,dm-pre-reloc;" (not sure which one is the formal correct one),
As Tom already stated: dm-pre-reloc is correct here. More information and hints about when to use dm-pre-reloc, dm-spl and dm-tpl can be found in doc/driver-model/README.txt.
Quoted 5 lines
flag at least to the most important "ocp" and also to all devices from where the am335x can boot. Does anybody think that we may run into SPL size trouble,
with this little bigger dtb blob in spl ?
As dm-pre-reloc already existed in am33xx.dtsi before syncing this file with Linux 4.20.0 I don't think that size would be an issue.
Quoted 3 lines
So maybe we can finish the discussion during next week and then i will provide a patch adding/using some "
am33xx-uboot.dtsi" file.
Excellent, many thanks!
regards Felix