cpuidle: dt: bail out if the idle-state DT node is not compatible
Subsystems (2)
PATCH v2 1/1 cpuidle: dt: bail out if the idle-state DT node is not compatible
Currently, the DT of the idle states will be parsed first whether it's compatible or not. This could cause a warning message that comes from if the CPU doesn't support identical idle states. E.g. Tegra186 can run with 2 Cortex-A57 and 2 Denver cores with different idle states on different types of these cores.
So fix it by checking the match node earlier, then it can make sure it only goes through the idle states that the CPU supported.
---
v2:
* fix it by moving of_match_node earlier, so we don't need to match the node twice like the v1 did.
--- drivers/cpuidle/dt_idle_states.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/cpuidle/dt_idle_states.c +9 -6
@@ -22,16 +22,12 @@#include "dt_idle_states.h" static int init_state_node (struct cpuidle_state *idle_state, -const struct of_device_id *matches, +const struct of_device_id *match_id,struct device_node *state_node) {int err; -const struct of_device_id *match_id;const char *desc; - match_id =of_match_node (matches, state_node); -if (!match_id) -return -ENODEV ;/* * CPUidle drivers are expected to initialize the const void *data * pointer of the passed in struct of_device_id array to the idle
@@ -160,6 +156,7 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, {struct cpuidle_state *idle_state;struct device_node *state_node, *cpu_node; +const struct of_device_id *match_id;int i, err =0 ;const cpumask_t *cpumask;unsigned int state_idx = start_idx;
@@ -180,6 +177,12 @@ int dt_init_idle_driver(struct cpuidle_driver *drv,if (!state_node)break ; + match_id =of_match_node (matches, state_node); +if (!match_id) { + err = -ENODEV ; +break ; + } +if (!of_device_is_available (state_node)) {of_node_put (state_node);continue ;
@@ -198,7 +201,7 @@ int dt_init_idle_driver(struct cpuidle_driver *drv, } idle_state = &drv->states[state_idx++]; - err =init_state_node (idle_state, matches, state_node); + err =init_state_node (idle_state, match_id, state_node);if (err) {pr_err ("Parsing idle state node %pOF failed with err %d\n" , state_node, err);
Signature · 1 line
2.20.1
Quoted 6 lines · Joseph Lo
Currently, the DT of the idle states will be parsed first whether it's compatible or not. This could cause a warning message that comes from if the CPU doesn't support identical idle states. E.g. Tegra186 can run with 2 Cortex-A57 and 2 Denver cores with different idle states on different types of these cores.
Quoted 8 lines
So fix it by checking the match node earlier, then it can make sure it only goes through the idle states that the CPU supported.
Signed-off-by Joseph Lo <[email protected]>---
v2:
* fix it by movingof_match_nodeearlier, so we don't need to match the node twice like the v1 did.
Neat, thanks for the quick patch. FWIW,
--
Regards,
Sudeep
Quoted 16 lines · CET Sudeep Holla
Quoted 6 lines · Joseph Lo
Currently, the DT of the idle states will be parsed first whether it's compatible or not. This could cause a warning message that comes from if the CPU doesn't support identical idle states. E.g. Tegra186 can run with 2 Cortex-A57 and 2 Denver cores with different idle states on different types of these cores.
Quoted 8 lines
So fix it by checking the match node earlier, then it can make sure it only goes through the idle states that the CPU supported.
Signed-off-by Joseph Lo <[email protected]>---
v2:
* fix it by movingof_match_nodeearlier, so we don't need to match the node twice like the v1 did.
Quoted 3 lines
Neat, thanks for the quick patch. FWIW,
Reviewed-by Sudeep Holla <[email protected]>
Patch applied, thanks!