CRTC background color
Subsystems (3)
v5 cover CRTC background color
Previous patch series/discussion was here:
https://lists.freedesktop.org/archives/dri-devel/2019-January/205504.html
Reviewed userspace (chromeos) is here:
https://chromium-review.googlesource.com/c/chromium/src/+/1278858
https://chromium-review.googlesource.com/c/chromiumos/platform/drm-tests/+/1241436
i-g-t test is here:
https://lists.freedesktop.org/archives/igt-dev/2019-January/008751.html
Just minor changes in this revision:
- Patch 1:
* drm_crtc_add_bgcolor_property() also explicitly sets the crtc state field to solid black in case the driver doesn't already do this.
* Added kerneldoc for drm_crtc_add_bgcolor_property()
- Patch 2:
* s/uint64_t/u64/
- Patch 3:
* New i915 patch to add bgcolor to hardware readout & state verification as suggested by Ville
I think patches #1 and 2 have the necessary reviews and ABI prereqs to merge at this point. Dave/Daniel, any worries if we merge this through the intel tree rather than drm-misc? I think merging through the Intel tree may help avoid some minor conflicts with an upcoming series from Ville.
Matt Roper (3):
drm: Add CRTC background color property (v5) drm/i915/gen9+: Add support for pipe background color (v5) drm/i915: Add background color hardware readout and state check
drivers/gpu/drm/drm_atomic_uapi.c | 4 ++ drivers/gpu/drm/drm_blend.c | 41 +++++++++++++++++-- drivers/gpu/drm/drm_mode_config.c | 6 +++ drivers/gpu/drm/i915/i915_debugfs.c | 9 +++++ drivers/gpu/drm/i915/intel_display.c | 78 +++++++++++++++++++++++++++++++----- include/drm/drm_blend.h | 1 + include/drm/drm_crtc.h | 12 ++++++ include/drm/drm_mode_config.h | 5 +++ include/uapi/drm/drm_mode.h | 28 +++++++++++++ 9 files changed, 170 insertions(+), 14 deletions(-)
Signature · 6 lines
2.14.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v5 1/3 drm: Add CRTC background color property (v5)
Some display controllers can be programmed to present non-black colors for pixels not covered by any plane (or pixels covered by the transparent regions of higher planes). Compositors that want a UI with a solid color background can potentially save memory bandwidth by setting the CRTC background property and using smaller planes to display the rest of the content.
To avoid confusion between different ways of encoding RGB data, we define a standard 64-bit format that should be used for this property's value. Helper functions and macros are provided to generate and dissect values in this standard format with varying component precision values.
v2:
- Swap internal representation's blue and red bits to make it easier to read if printed out. (Ville)
- Document bgcolor property in drm_blend.c. (Sean Paul)
- s/background_color/bgcolor/ for consistency between property name and value storage field. (Sean Paul)
- Add a convenience function to attach property to a given crtc.
v3:
- Restructure ARGB component extraction macros to be easier to understand and enclose the parameters in () to avoid calculations if expressions are passed. (Sean Paul)
- s/rgba/argb/ in helper function/macro names. Even though the idea is to not worry about the internal representation of the u64, it can still be confusing to look at code that uses 'rgba' terminology, but stores values with argb ordering. (Ville)
v4:
- Drop the bgcolor_changed flag. (Ville, Brian Starkey)
- Clarify in kerneldoc that background color is expected to undergo the same pipe-level degamma/csc/gamma transformations that planes do. (Brian Starkey)
- Update kerneldoc to indicate non-opaque colors are allowed, but are generally only useful in special cases such as when writeback connectors are used (Brian Starkey / Eric Anholt)
v5:
- Set crtc->state->bgcolor to solid black inside drm_crtc_add_bgcolor_property() in case drivers don't do this themselves. (Ville)
- Add kerneldoc to drm_crtc_add_bgcolor_property() function.
Reviewed-by(v2): Sean Paul <[email protected]>
--- drivers/gpu/drm/drm_atomic_uapi.c | 4 ++++ drivers/gpu/drm/drm_blend.c | 41 ++++++++++++++++++++++++++++++++++++--- drivers/gpu/drm/drm_mode_config.c | 6 ++++++ include/drm/drm_blend.h | 1 + include/drm/drm_crtc.h | 12 ++++++++++++ include/drm/drm_mode_config.h | 5 +++++ include/uapi/drm/drm_mode.h | 28 ++++++++++++++++++++++++++ 7 files changed, 94 insertions(+), 3 deletions(-)
drivers/gpu/drm/drm_atomic_uapi.c +4 -0
@@ -469,6 +469,8 @@ static int drm_atomic_crtc_set_property(struct drm_crtc *crtc,return -EFAULT ;set_out_fence_for_crtc (state->state, crtc, fence_ptr); + }else if (property == config->bgcolor_property) { + state->bgcolor = val; }else if (crtc->funcs->atomic_set_property) {return crtc->funcs->atomic_set_property (crtc, state, property, val); }else {
@@ -503,6 +505,8 @@ drm_atomic_crtc_get_property(struct drm_crtc *crtc, *val = (state->gamma_lut) ? state->gamma_lut->base.id :0 ; else if (property == config->prop_out_fence_ptr) *val = 0; + else if (property == config->bgcolor_property) + *val = state->bgcolor; else if (crtc->funcs->atomic_get_property) return crtc->funcs->atomic_get_property(crtc, state, property, val); else
drivers/gpu/drm/drm_blend.c +38 -3
50 lines not on this page · raw message
drivers/gpu/drm/drm_mode_config.c +6 -0
@@ -364,6 +364,12 @@ static int drm_mode_create_standard_properties(struct drm_device *dev)return -ENOMEM ; dev->mode_config.modifiers_property = prop; + prop =drm_property_create_range (dev,0 ,"BACKGROUND_COLOR" , +0 ,GENMASK_ULL (63 ,0 )); +if (!prop) +return -ENOMEM ; + dev->mode_config.bgcolor_property = prop; +return 0 ; }
include/drm/drm_blend.h +1 -0
@@ -58,4 +58,5 @@ int drm_atomic_normalize_zpos(struct drm_device *dev, struct drm_atomic_state *state);int drm_plane_create_blend_mode_property (struct drm_plane *plane,unsigned int supported_modes); +void drm_crtc_add_bgcolor_property (struct drm_crtc *crtc);#endif
include/drm/drm_crtc.h +12 -0
@@ -274,6 +274,18 @@ struct drm_crtc_state {*/ struct drm_property_blob *gamma_lut; +/** +* @bgcolor: +* +* RGB value representing the pipe's background color. The background +* color (aka "canvas color") of a pipe is the color that will be used +* for pixels not covered by a plane, or covered by transparent pixels +* of a plane. The value here should be built via drm_argb(); +* individual color components can be extracted with desired precision +* via the DRM_ARGB_*() macros. +*/ +u64 bgcolor; +/** * @target_vblank: *
include/drm/drm_mode_config.h +5 -0
@@ -836,6 +836,11 @@ struct drm_mode_config {*/ struct drm_property *writeback_out_fence_ptr_property; +/** +* @bgcolor_property: RGB background color for CRTC. +*/ +struct drm_property *bgcolor_property; +/* dumb ioctl parameters */ uint32_t preferred_depth, prefer_shadow;
include/uapi/drm/drm_mode.h +28 -0
@@ -907,6 +907,34 @@ struct drm_mode_rect {__s32 y2; }; +/* +* Put ARGB values into a standard 64-bit representation that can be used +* for ioctl parameters, inter-driver commmunication, etc. If the component +* values being provided contain less than 16 bits of precision, they'll +* be shifted into the most significant bits. +*/ +static inline __u64 +drm_argb (__u8 bpc,__u16 alpha,__u16 red,__u16 green,__u16 blue) +{ +int msb_shift =16 - bpc; + +return (__u64 )alpha << msb_shift <<48 | + (__u64 )red << msb_shift <<32 | + (__u64 )green << msb_shift <<16 | + (__u64 )blue << msb_shift; +} + +/* +* Extract the specified number of bits of a specific color component from a +* standard 64-bit ARGB value. +*/ +#define DRM_ARGB_COMP (c, shift, numbits) \ + (__u16)(((c) & 0xFFFFull << (shift)) >> ((shift) + 16 - (numbits))) +#define DRM_ARGB_BLUE (c, numbits) DRM_ARGB_COMP(c, 0, numbits) +#define DRM_ARGB_GREEN (c, numbits) DRM_ARGB_COMP(c, 16, numbits) +#define DRM_ARGB_RED (c, numbits) DRM_ARGB_COMP(c, 32, numbits) +#define DRM_ARGB_ALPHA (c, numbits) DRM_ARGB_COMP(c, 48, numbits) +#if defined(__cplusplus) }#endif
Signature · 6 lines
2.14.5 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 2/3 drm/i915/gen9+: Add support for pipe background color (v5)
In reply to Matt RoperGen9+ platforms allow CRTC's to be programmed with a background/canvas color below the programmable planes. Let's expose this for use by compositors.
v2:
- Split out bgcolor sanitization and programming of csc/gamma bits to a separate patch that we can land before the ABI changes are ready to go in. (Ville)
- Change a temporary variable name to be more consistent with other similar functions. (Ville)
- Change register name to SKL_CANVAS for consistency with the CHV_CANVAS register.
v3:
- Switch register name back to SKL_BOTTOM_COLOR. (Ville)
- Use non-_FW register write. (Ville)
- Minor parameter rename for consistency. (Ville)
v4:
- Removed use of bgcolor_changed flag.
v5:
- s/uint64_t/u64/
--- drivers/gpu/drm/i915/i915_debugfs.c | 9 +++++++ drivers/gpu/drm/i915/intel_display.c | 46 +++++++++++++++++++++++++++--------- 2 files changed, 44 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/i915_debugfs.c +9 -0
@@ -3092,6 +3092,15 @@ static int i915_display_info(struct seq_file *m, void *unused)intel_plane_info (m, crtc); } +if (INTEL_GEN (dev_priv) >=9 && pipe_config->base.active) { +u64 background = pipe_config->base.bgcolor; + +seq_printf (m,"\tbackground color (10bpc): r=%x g=%x b=%x\n" , +DRM_ARGB_RED (background,10 ), +DRM_ARGB_GREEN (background,10 ), +DRM_ARGB_BLUE (background,10 )); + } +seq_printf (m,"\tunderrun reporting: cpu=%s pch=%s \n" ,yesno (!crtc->cpu_fifo_underrun_disabled),yesno (!crtc->pch_fifo_underrun_disabled));
drivers/gpu/drm/i915/intel_display.c +35 -11
89 lines not on this page · raw message
Signature · 6 lines
2.14.5 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v5 3/3 drm/i915: Add background color hardware readout and state check
In reply to Matt RoperWe should support readout and verification of crtc background color as we do with other pipe state. Note that our hardware holds less bits of precision than the CRTC state allows, so we need to take care to only verify the most significant bits of the color after performing readout.
At boot time the pipe color is already sanitized to full black as required by ABI, so the new readout here won't break that requirement.
--- drivers/gpu/drm/i915/intel_display.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
drivers/gpu/drm/i915/intel_display.c +32 -0
@@ -9740,6 +9740,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum intel_display_power_domain power_domain;u64 power_domain_mask; +u32 bgcolor;bool active;intel_crtc_init_scalers (crtc, pipe_config);
@@ -9806,6 +9807,15 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, pipe_config->pixel_multiplier =1 ; } +if (INTEL_GEN (dev_priv) >=9 ) { + bgcolor =I915_READ (SKL_BOTTOM_COLOR (crtc->pipe)); + pipe_config->base.bgcolor = +drm_argb (10 ,0xFFFF , + bgcolor >>20 &0x3FF , + bgcolor >>10 &0x3FF , + bgcolor &0x3FF ); + } + out:for_each_power_domain (power_domain, power_domain_mask)intel_display_power_put_unchecked (dev_priv, power_domain);
@@ -11422,6 +11432,10 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,drm_rect_width (&state->base.dst), drm_rect_height(&state->base.dst)); } + +if (INTEL_GEN (dev_priv) >=9 ) +DRM_DEBUG_KMS ("background color: %llx\n" , + pipe_config->base.bgcolor); }static bool check_digital_port_conflicts (struct drm_atomic_state *state)
@@ -11784,6 +11798,16 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv, } \ } while (0) +#define PIPE_CONF_CHECK_LLX_MASKED (name, mask) do { \ + if ((current_config->name & mask) != (pipe_config->name & mask)) { \ + pipe_config_err(adjust, __stringify(name), \ + "(expected 0x%016llx, found 0x%016llx)\n", \ + current_config->name & mask, \ + pipe_config->name & mask); \ + ret = false; \ + } \ +} while (0) +#define PIPE_CONF_CHECK_I (name) do { \ if (current_config->name != pipe_config->name) { \ pipe_config_err(adjust, __stringify(name), \
@@ -12035,6 +12059,14 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,PIPE_CONF_CHECK_I (min_voltage_level); +/* +* Hardware only holds top 10 bits of each color component; ignore +* bottom six bits (and all of alpha) when comparing against readout. +*/ +if (INTEL_GEN (dev_priv) >=9 ) +PIPE_CONF_CHECK_LLX_MASKED (base.bgcolor,0x0000FFC0FFC0FFC0 ); + +#undef PIPE_CONF_CHECK_LLX_MASKED#undef PIPE_CONF_CHECK_X#undef PIPE_CONF_CHECK_I#undef PIPE_CONF_CHECK_BOOL
Signature · 6 lines
2.14.5 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v5 3/3] drm/i915: Add background color hardware readout and state check
Quoted 11 lines · Matt Roper
We should support readout and verification of crtc background color as we do with other pipe state. Note that our hardware holds less bits of precision than the CRTC state allows, so we need to take care to only verify the most significant bits of the color after performing readout.
At boot time the pipe color is already sanitized to full black as required by ABI, so the new readout here won't break that requirement.
Suggested-by Ville Syrjälä <[email protected]>Cc Ville Syrjälä <[email protected]>Signed-off-by Matt Roper <[email protected]>
Quoted 77 lines
--- drivers/gpu/drm/i915/intel_display.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)drivers/gpu/drm/i915/intel_display.c +32
-0@@ -9740,6 +9740,7 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc,struct drm_i915_private *dev_priv =to_i915 (crtc->base.dev);enum intel_display_power_domain power_domain;u64 power_domain_mask; +u32 bgcolor;bool active;intel_crtc_init_scalers (crtc, pipe_config);@@ -9806,6 +9807,15 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, pipe_config->pixel_multiplier =1 ; } +if (INTEL_GEN (dev_priv) >=9 ) { + bgcolor =I915_READ (SKL_BOTTOM_COLOR (crtc->pipe)); + pipe_config->base.bgcolor = +drm_argb (10 ,0xFFFF , + bgcolor >>20 &0x3FF , + bgcolor >>10 &0x3FF , + bgcolor &0x3FF ); + } + out:for_each_power_domain (power_domain, power_domain_mask)intel_display_power_put_unchecked (dev_priv, power_domain);@@ -11422,6 +11432,10 @@ static void intel_dump_pipe_config(struct intel_crtc *crtc,drm_rect_width (&state->base.dst), drm_rect_height(&state->base.dst)); } + +if (INTEL_GEN (dev_priv) >=9 ) +DRM_DEBUG_KMS ("background color: %llx\n" , + pipe_config->base.bgcolor); }static bool check_digital_port_conflicts (struct drm_atomic_state *state)@@ -11784,6 +11798,16 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv, } \ } while (0) +#define PIPE_CONF_CHECK_LLX_MASKED (name, mask) do { \ + if ((current_config->name & mask) != (pipe_config->name & mask)) { \ + pipe_config_err(adjust, __stringify(name), \ + "(expected 0x%016llx, found 0x%016llx)\n", \ + current_config->name & mask, \ + pipe_config->name & mask); \ + ret = false; \ + } \ +} while (0) +#define PIPE_CONF_CHECK_I (name) do { \ if (current_config->name != pipe_config->name) { \ pipe_config_err(adjust, __stringify(name), \@@ -12035,6 +12059,14 @@ intel_pipe_config_compare(struct drm_i915_private *dev_priv,PIPE_CONF_CHECK_I (min_voltage_level); +/* +* Hardware only holds top 10 bits of each color component; ignore +* bottom six bits (and all of alpha) when comparing against readout. +*/ +if (INTEL_GEN (dev_priv) >=9 ) +PIPE_CONF_CHECK_LLX_MASKED (base.bgcolor,0x0000FFC0FFC0FFC0 ); + +#undef PIPE_CONF_CHECK_LLX_MASKED#undef PIPE_CONF_CHECK_X#undef PIPE_CONF_CHECK_I#undef PIPE_CONF_CHECK_BOOLSignature · 1 line
2.14.5
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for CRTC background color (rev6)
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: CRTC background color (rev6)
URL : https://patchwork.freedesktop.org/series/50834/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 8c549af67706 drm: Add CRTC background color property (v5) -:239: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'shift' - possible side-effects? #239: FILE: include/uapi/drm/drm_mode.h:931: +#define DRM_ARGB_COMP(c, shift, numbits) \ + (__u16)(((c) & 0xFFFFull << (shift)) >> ((shift) + 16 - (numbits)))
total: 0 errors, 0 warnings, 1 checks, 146 lines checked e8c3b924963a drm/i915/gen9+: Add support for pipe background color (v5) 7d3a7c26e2ef drm/i915: Add background color hardware readout and state check -:65: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'name' - possible side-effects? #65: FILE: drivers/gpu/drm/i915/intel_display.c:11801:
+#define PIPE_CONF_CHECK_LLX_MASKED(name, mask) do { \
+ if ((current_config->name & mask) != (pipe_config->name & mask)) { \
+ pipe_config_err(adjust, __stringify(name), \
+ "(expected 0x%016llx, found 0x%016llx)\n", \ + current_config->name & mask, \ + pipe_config->name & mask); \
+ ret = false; \
+ } \
+} while (0)
-:65: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'name' may be better as '(name)' to avoid precedence issues #65: FILE: drivers/gpu/drm/i915/intel_display.c:11801:
+#define PIPE_CONF_CHECK_LLX_MASKED(name, mask) do { \
+ if ((current_config->name & mask) != (pipe_config->name & mask)) { \
+ pipe_config_err(adjust, __stringify(name), \
+ "(expected 0x%016llx, found 0x%016llx)\n", \ + current_config->name & mask, \ + pipe_config->name & mask); \
+ ret = false; \
+ } \
+} while (0)
-:65: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'mask' - possible side-effects? #65: FILE: drivers/gpu/drm/i915/intel_display.c:11801:
+#define PIPE_CONF_CHECK_LLX_MASKED(name, mask) do { \
+ if ((current_config->name & mask) != (pipe_config->name & mask)) { \
+ pipe_config_err(adjust, __stringify(name), \
+ "(expected 0x%016llx, found 0x%016llx)\n", \ + current_config->name & mask, \ + pipe_config->name & mask); \
+ ret = false; \
+ } \
+} while (0)
-:65: CHECK:MACRO_ARG_PRECEDENCE: Macro argument 'mask' may be better as '(mask)' to avoid precedence issues #65: FILE: drivers/gpu/drm/i915/intel_display.c:11801:
+#define PIPE_CONF_CHECK_LLX_MASKED(name, mask) do { \
+ if ((current_config->name & mask) != (pipe_config->name & mask)) { \
+ pipe_config_err(adjust, __stringify(name), \
+ "(expected 0x%016llx, found 0x%016llx)\n", \ + current_config->name & mask, \ + pipe_config->name & mask); \
+ ret = false; \
+ } \
+} while (0)
total: 0 errors, 0 warnings, 4 checks, 62 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.SPARSE: warning for CRTC background color (rev6)
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: CRTC background color (rev6)
URL : https://patchwork.freedesktop.org/series/50834/
State : warning
== Summary ==
$ dim sparse origin/drm-tip Sparse version: v0.5.2 Commit: drm: Add CRTC background color property (v5) Okay!
Commit: drm/i915/gen9+: Add support for pipe background color (v5) Okay!
Commit: drm/i915: Add background color hardware readout and state check +drivers/gpu/drm/i915/intel_display.c:12067:17: warning: constant 0x0000FFC0FFC0FFC0 is so big it is long +drivers/gpu/drm/i915/intel_display.c:12067:17: warning: constant 0x0000FFC0FFC0FFC0 is so big it is long +drivers/gpu/drm/i915/intel_display.c:12067:17: warning: constant 0x0000FFC0FFC0FFC0 is so big it is long +drivers/gpu/drm/i915/intel_display.c:12067:17: warning: constant 0x0000FFC0FFC0FFC0 is so big it is long
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for CRTC background color (rev6)
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: CRTC background color (rev6)
URL : https://patchwork.freedesktop.org/series/50834/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5521 -> Patchwork_12112
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/50834/revisions/6/mbox/
Known issues
------------
Here are the changes found in Patchwork_12112 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_selftest@live_execlists:
- fi-apl-guc: PASS -> INCOMPLETE [fdo#103927]
* igt@kms_frontbuffer_tracking@basic:
- fi-byt-clapper: PASS -> FAIL [fdo#103167]
* igt@prime_vgem@basic-fence-flip:
- fi-gdg-551: PASS -> FAIL [fdo#103182]
#### Possible fixes ####
* igt@i915_selftest@live_hangcheck:
- {fi-icl-y}: INCOMPLETE -> PASS
* igt@kms_busy@basic-flip-a:
- fi-gdg-551: FAIL [fdo#103182] -> PASS
* igt@kms_pipe_crc_basic@nonblocking-crc-pipe-a-frame-sequence:
- fi-byt-clapper: FAIL [fdo#103191] / [fdo#107362] -> PASS +1
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#108622]: https://bugs.freedesktop.org/show_bug.cgi?id=108622
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
Participating hosts (49 -> 45)
------------------------------
Additional (1): fi-hsw-4770r
Missing (5): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-ctg-p8600 fi-bdw-samus
Build changes
-------------
* Linux: CI_DRM_5521 -> Patchwork_12112
CI_DRM_5521: dbd2e19079beb3b7f4077706179fba66d321e49f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4802: 4049adf01014af077df2174def4fadf7cecb066e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12112: 7d3a7c26e2ef212cb7e71c1ec19308d6f27b6506 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
7d3a7c26e2ef drm/i915: Add background color hardware readout and state check e8c3b924963a drm/i915/gen9+: Add support for pipe background color (v5) 8c549af67706 drm: Add CRTC background color property (v5)
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12112/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for CRTC background color (rev6)
In reply to Matt Roper== Series Details ==
== Series Details ==
Series: CRTC background color (rev6)
URL : https://patchwork.freedesktop.org/series/50834/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5521_full -> Patchwork_12112_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_12112_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_eio@reset-stress:
- shard-snb: PASS -> INCOMPLETE [fdo#105411]
* igt@kms_atomic_transition@plane-use-after-nonblocking-unbind:
- shard-hsw: PASS -> DMESG-WARN [fdo#102614] +1
* igt@kms_cursor_crc@cursor-256x85-random:
- shard-apl: PASS -> FAIL [fdo#103232] +1
* igt@kms_cursor_legacy@2x-nonblocking-modeset-vs-cursor-atomic:
- shard-glk: PASS -> FAIL [fdo#105454] / [fdo#106509]
* igt@kms_flip@2x-flip-vs-expired-vblank:
- shard-glk: PASS -> FAIL [fdo#105363]
* igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
- shard-apl: PASS -> FAIL [fdo#103166]
* igt@kms_setmode@basic:
- shard-hsw: PASS -> FAIL [fdo#99912]
#### Possible fixes ####
* igt@kms_color@pipe-c-ctm-max:
- shard-apl: FAIL [fdo#108147] -> PASS
* igt@kms_cursor_crc@cursor-128x128-dpms:
- shard-apl: FAIL [fdo#103232] -> PASS
* igt@kms_flip@flip-vs-expired-vblank:
- shard-glk: FAIL [fdo#105363] -> PASS
* igt@kms_plane_multiple@atomic-pipe-b-tiling-x:
- shard-apl: FAIL [fdo#103166] -> PASS +1
* igt@kms_plane_multiple@atomic-pipe-b-tiling-y:
- shard-glk: FAIL [fdo#103166] -> PASS +2
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102614]: https://bugs.freedesktop.org/show_bug.cgi?id=102614
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103540]: https://bugs.freedesktop.org/show_bug.cgi?id=103540
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#105454]: https://bugs.freedesktop.org/show_bug.cgi?id=105454
[fdo#106509]: https://bugs.freedesktop.org/show_bug.cgi?id=106509
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#99912]: https://bugs.freedesktop.org/show_bug.cgi?id=99912
Participating hosts (6 -> 4)
------------------------------
Missing (2): shard-skl shard-iclb
Build changes
-------------
* Linux: CI_DRM_5521 -> Patchwork_12112
CI_DRM_5521: dbd2e19079beb3b7f4077706179fba66d321e49f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4802: 4049adf01014af077df2174def4fadf7cecb066e @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12112: 7d3a7c26e2ef212cb7e71c1ec19308d6f27b6506 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12112/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx