Various convenience fixes
v2 cover Various convenience fixes
As I found myself using kvmtool more often in the last weeks, I got more and more annoyed by some smaller "ticks" that kvmtool shows.
So this is an attempt to post various smaller fixes I gathered up over the years, but never found worth enough to send out. Version 2 drops the two patches that have been merged already, and amends the remaining ones.
The patches address:
- add /chosen/stdout-path node in .dtb
- honour make -s switch
- remove pointless kvmtool version number
- introduce autodetection of supported GIC type
Changelog v1..v2:
- stdout-path: Let hw/serial.c set the node path and use an alias
- make -s: adapt to newest version from the Linux kernel
- kvmtool "version" number: unchanged, but verified to be compatible with the Debian package
- GIC autodetection: ignore --force-pci, always try to have an MSI controller
Please have a look!
Cheers,
Andre.
Andre Przywara (4):
arm: fdt: add stdout-path to /chosen node
Makefile: support -s switch
Makefile: Remove echoing of kvmtools version file
arm: Auto-detect guest GIC type
Makefile | 6 +++++- arm/fdt.c | 10 ++++++++++ arm/gic.c | 25 +++++++++++++++++++++++++ arm/include/arm-common/gic.h | 1 + hw/serial.c | 9 +++++++++ include/kvm/fdt.h | 2 ++ util/KVMTOOLS-VERSION-GEN | 1 - 7 files changed, 52 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/4 arm: fdt: add stdout-path to /chosen node
The DT spec describes the stdout-path property in the /chosen node to contain the DT path for a default device usable for outputting characters. The Linux kernel uses this for earlycon (without further parameters), other DT users might rely on this as well.
Add a stdout-path property pointing to the "serial0" alias, then add an aliases node at the end of the FDT, containing the actual path. This allows the FDT generation code in hw/serial.c to set this string.
Even when we use the virtio console, the serial console is still there and works, so we can expose this unconditionally. Putting the virtio console path in there will not work anyway.
--- arm/fdt.c | 10 ++++++++++ hw/serial.c | 9 +++++++++ include/kvm/fdt.h | 2 ++ 3 files changed, 21 insertions(+)
arm/fdt.c +10 -0
@@ -145,6 +145,7 @@ static int setup_fdt(struct kvm *kvm) kvm->cfg.real_cmdline));_FDT (fdt_property_u64 (fdt,"kaslr-seed" , kvm->cfg.arch.kaslr_seed)); +_FDT (fdt_property_string (fdt,"stdout-path" ,"serial0" ));/* Initrd */ if (kvm->arch.initrd_size !=0 ) {
@@ -210,6 +211,15 @@ static int setup_fdt(struct kvm *kvm)_FDT (fdt_property_cell (fdt,"migrate" , fns->migrate));_FDT (fdt_end_node (fdt)); +if (fdt_stdout_path) { +_FDT (fdt_begin_node (fdt,"aliases" )); +_FDT (fdt_property_string (fdt,"serial0" , fdt_stdout_path)); +_FDT (fdt_end_node (fdt)); + +free (fdt_stdout_path); + fdt_stdout_path =NULL ; + } +/* Finalise. */ _FDT (fdt_end_node (fdt));_FDT (fdt_finish (fdt));
hw/serial.c +9 -0
@@ -366,6 +366,9 @@ static bool serial8250_in(struct ioport *ioport, struct kvm_cpu *vcpu, u16 port, }#ifdef CONFIG_HAS_LIBFDT + +char *fdt_stdout_path =NULL ; +#define DEVICE_NAME_MAX_LEN 32 static void serial8250_generate_fdt_node(struct ioport *ioport, void *fdt,
@@ -383,6 +386,12 @@ void serial8250_generate_fdt_node(struct ioport *ioport, void *fdt,snprintf (dev_name,DEVICE_NAME_MAX_LEN ,"U6_16550A@%llx" , addr); +if (!fdt_stdout_path) { + fdt_stdout_path =malloc (strlen (dev_name) +2 ); +/* Assumes that this node is a child of the root node. */ +sprintf (fdt_stdout_path,"/%s" , dev_name); + } +_FDT (fdt_begin_node (fdt, dev_name));_FDT (fdt_property_string (fdt,"compatible" ,"ns16550a" ));_FDT (fdt_property (fdt,"reg" , reg_prop,sizeof (reg_prop)));
include/kvm/fdt.h +2 -0
@@ -25,6 +25,8 @@ enum irq_type { IRQ_TYPE_LEVEL_MASK = (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH), }; +extern char *fdt_stdout_path; +/* Helper for the various bits of code that generate FDT nodes */ #define _FDT (exp) \ do { \
Signature · 1 line
2.17.1
PATCH v2 2/4 Makefile: support -s switch
In reply to Andre Przywara"make -s" suppresses normal output, just shows warnings and errors. But since we explicitly override the make output with our fancy concise version, we miss out on this feature.
Do as the kernel does and explicitly suppress every normal output when -s is given. This helps to spot warnings that scroll out of the terminal window too quickly.
--- Makefile | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
Makefile +5 -1
@@ -3,7 +3,11 @@ # ifeq ($(strip $(V)),) - E = @echo + ifeq ($(findstring s,$(filter-out --%,$(MAKEFLAGS))),) + E = @echo + else + E = @\# + endif Q = @ else E = @\#
Signature · 1 line
2.17.1
PATCH v2 3/4 Makefile: Remove echoing of kvmtools version file
In reply to Andre PrzywaraOn every build we report the kvmtool "version" number, which isn't meaningful at all anymore.
Remove the line from the KVMTOOLS-VERSION-GEN script to drop a pointless message.
--- util/KVMTOOLS-VERSION-GEN | 1 - 1 file changed, 1 deletion(-)
util/KVMTOOLS-VERSION-GEN +0 -1
@@ -35,6 +35,5 @@ else VC=unset fi test "$VN" = "$VC" || { - echo >&2 "KVMTOOLS_VERSION = $VN" echo "KVMTOOLS_VERSION = $VN" >$GVF }
Signature · 1 line
2.17.1
PATCH v2 4/4 arm: Auto-detect guest GIC type
In reply to Andre PrzywaraAt the moment kvmtool always tries to instantiate a virtual GICv2 for the guest, and fails with some scary error message if that doesn't work. The user has then to manually specify "--irqchip=gicv3", which is not really obvious.
With the advent of more GICv3-only machines, let's try to be more clever and implement some auto-detection of the GIC type needed:
We try gicv3-its, gicv3, gicv2m and gicv2, in that order. That first one succeeding wins.
For GICv2 machines the first two will always fail. For GICv2-backwards compatible GICv3 machines GICv3 is probably the better choice these days.
This algorithm is in effect is there is no explicit --irqchip parameter on the command line. We still allow the GIC type to be set explicitly.
--- arm/gic.c | 25 +++++++++++++++++++++++++ arm/include/arm-common/gic.h | 1 + 2 files changed, 26 insertions(+)
arm/gic.c +25 -0
@@ -182,6 +182,8 @@ static int gic__create_device(struct kvm *kvm, enum irqchip_type type) gic_device.type =KVM_DEV_TYPE_ARM_VGIC_V3 ; dist_attr.attr =KVM_VGIC_V3_ADDR_TYPE_DIST ;break ; +case IRQCHIP_AUTO : +return -ENODEV ; } err =ioctl (kvm->vm_fd,KVM_CREATE_DEVICE , &gic_device);
@@ -199,6 +201,8 @@ static int gic__create_device(struct kvm *kvm, enum irqchip_type type)case IRQCHIP_GICV3 : err =ioctl (gic_fd,KVM_SET_DEVICE_ATTR , &redist_attr);break ; +case IRQCHIP_AUTO : +return -ENODEV ; }if (err) goto out_err;
@@ -249,9 +253,30 @@ static int gic__create_irqchip(struct kvm *kvm)int gic__create (struct kvm *kvm,enum irqchip_type type) { +enum irqchip_type try;int err;switch (type) { +case IRQCHIP_AUTO : + try =IRQCHIP_GICV3_ITS ; + err =gic__create (kvm, try); +if (err) { + try =IRQCHIP_GICV3 ; + err =gic__create (kvm, try); + } +if (err) { + try =IRQCHIP_GICV2M ; + err =gic__create (kvm, try); + } +if (err) { + try =IRQCHIP_GICV2 ; + err =gic__create (kvm, try); + } +if (err) +return err; + + kvm->cfg.arch.irqchip = try; +return 0 ;case IRQCHIP_GICV2M : gic_msi_size =KVM_VGIC_V2M_SIZE ; gic_msi_base =ARM_GIC_CPUI_BASE - gic_msi_size;
arm/include/arm-common/gic.h +1 -0
@@ -24,6 +24,7 @@#define KVM_VGIC_V2M_SIZE 0x1000enum irqchip_type { +IRQCHIP_AUTO ,IRQCHIP_GICV2 ,IRQCHIP_GICV2M ,IRQCHIP_GICV3 ,
Signature · 1 line
2.17.1
Re: [PATCH v2 4/4] arm: Auto-detect guest GIC type
Quoted 57 lines · Andre Przywara
At the moment kvmtool always tries to instantiate a virtual GICv2 for the guest, and fails with some scary error message if that doesn't work. The user has then to manually specify "--irqchip=gicv3", which is not really obvious.
With the advent of more GICv3-only machines, let's try to be more clever and implement some auto-detection of the GIC type needed:
We try gicv3-its, gicv3, gicv2m and gicv2, in that order. That first one succeeding wins.
For GICv2 machines the first two will always fail. For GICv2-backwards compatible GICv3 machines GICv3 is probably the better choice these days.This algorithm is in effect is there is no explicit --irqchip parameter on the command line. We still allow the GIC type to be set explicitly.
Signed-off-by Andre Przywara <[email protected]>--- arm/gic.c | 25 +++++++++++++++++++++++++ arm/include/arm-common/gic.h | 1 + 2 files changed, 26 insertions(+)arm/gic.c +12
-0@@ -182,6 +182,8 @@ static int gic__create_device(struct kvm *kvm, enum irqchip_type type) gic_device.type =KVM_DEV_TYPE_ARM_VGIC_V3 ; dist_attr.attr =KVM_VGIC_V3_ADDR_TYPE_DIST ;break ; +case IRQCHIP_AUTO : +return -ENODEV ; } err =ioctl (kvm->vm_fd,KVM_CREATE_DEVICE , &gic_device);@@ -199,6 +201,8 @@ static int gic__create_device(struct kvm *kvm, enum irqchip_type type)case IRQCHIP_GICV3 : err =ioctl (gic_fd,KVM_SET_DEVICE_ATTR , &redist_attr);break ; +case IRQCHIP_AUTO : +return -ENODEV ; }if (err) goto out_err;@@ -249,9 +253,30 @@ static int gic__create_irqchip(struct kvm *kvm)int gic__create (struct kvm *kvm,enum irqchip_type type) { +enum irqchip_type try;int err;switch (type) { +case IRQCHIP_AUTO : + try =IRQCHIP_GICV3_ITS ; + err =gic__create (kvm, try); +if (err) { + try =IRQCHIP_GICV3 ; + err =gic__create (kvm, try); + }
arm/gic.c static int gic__create_irqchip(struct kvm *kvm) · line 276
Quoted 10 lines
arm/gic.c +10
-0+if (err) { + try =IRQCHIP_GICV2M ; + err =gic__create (kvm, try); + } +if (err) { + try =IRQCHIP_GICV2 ; + err =gic__create (kvm, try); + } +if (err) +return err;
Easier to write this as a descending loop over the irqchip_type enum?
Will
Quoted 24 lines · Andre Przywara
As I found myself using kvmtool more often in the last weeks, I got more and more annoyed by some smaller "ticks" that kvmtool shows.
So this is an attempt to post various smaller fixes I gathered up over the years, but never found worth enough to send out. Version 2 drops the two patches that have been merged already, and amends the remaining ones.
The patches address:
- add /chosen/stdout-path node in .dtb
- honour make -s switch
- remove pointless kvmtool version number
- introduce autodetection of supported GIC typeChangelog v1..v2:
- stdout-path: Lethw/serial.cset the node path and use an alias
- make -s: adapt to newest version from the Linux kernel
- kvmtool "version" number: unchanged, but verified to be compatible with the Debian package
- GIC autodetection: ignore --force-pci, always try to have an MSI controllerPlease have a look!
Quoted 7 lines
Cheers,
Andre.Andre Przywara (4):
arm: fdt: add stdout-path to /chosen node
Makefile: support -s switch
Makefile: Remove echoing of kvmtools version file
I've applied these three, and left a comment on the other one.
Will