Skip to contentSkip to conversation

uboot: support external DTB in U-Boot images

PATCH New Clemens Gruber 3 participants 5 messages Mar 4, 2018 – Feb 3, 2019

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 uboot: support external DTB in U-Boot images

Allows signed FIT images to be verified with the public key in the DTB. The public key is stored in the bootloader image, which must have been verified by the previous stage in the trust chain, before loading it.

---
 boot/uboot/Config.in | 14 ++++++++++++++
 boot/uboot/uboot.mk  |  5 +++++
 2 files changed, 19 insertions(+)
boot/uboot/Config.in +14 -0
index 264f343767..620aa02bb9 100644
@@ -460,6 +460,20 @@ config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH
 	  To use this device tree source file, the U-Boot configuration
 	  file must refer to it.
 
+config BR2_TARGET_UBOOT_EXT_DTB
+	bool "External DTB"
+	help
+	  Put an external DTB in the U-Boot image. Used to store public
+	  keys for verifying signed FIT images.
+
+config BR2_TARGET_UBOOT_EXT_DTB_PATH
+	string "Path to external DTB"
+	depends on BR2_TARGET_UBOOT_EXT_DTB
+	help
+	  Path to external DTB to be put in the U-Boot image.
+	  Prepend ${TOPDIR}/ to specify paths relative to the top
+	  buildroot source directory.
+
 endif
 
 endif # BR2_TARGET_UBOOT
boot/uboot/uboot.mk +5 -0
index d2f241cd8b..469673bebf 100644
@@ -134,6 +134,11 @@ UBOOT_MAKE_OPTS += \
 	HOSTCC="$(HOSTCC) $(HOST_CFLAGS)" \
 	HOSTLDFLAGS="$(HOST_LDFLAGS)"
 
+ifeq ($(BR2_TARGET_UBOOT_EXT_DTB),y)
+UBOOT_MAKE_OPTS += \
+	EXT_DTB="$(call qstrip,$(BR2_TARGET_UBOOT_EXT_DTB_PATH))"
+endif
+
 ifeq ($(BR2_TARGET_UBOOT_NEEDS_ATF_BL31),y)
 UBOOT_DEPENDENCIES += arm-trusted-firmware
 UBOOT_MAKE_OPTS += BL31=$(BINARIES_DIR)/bl31.bin
Signature · 1 line
2.16.2
#1 lore raw

PATCH 1/1 uboot: support external DTB in U-Boot images

Clemens,

Quoted 24 lines · Clemens Gruber

Allows signed FIT images to be verified with the public key in the DTB. The public key is stored in the bootloader image, which must have been verified by the previous stage in the trust chain, before loading it.

---
 boot/uboot/Config.in | 14 ++++++++++++++
 boot/uboot/uboot.mk  |  5 +++++
 2 files changed, 19 insertions(+)
boot/uboot/Config.in +5 -0
index 264f343767..620aa02bb9 100644
@@ -460,6 +460,20 @@ config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH
          To use this device tree source file, the U-Boot configuration
          file must refer to it.
 
+config BR2_TARGET_UBOOT_EXT_DTB
+       bool "External DTB"
+       help
+         Put an external DTB in the U-Boot image. Used to store public
+         keys for verifying signed FIT images.

boot/uboot/Config.in config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH · line 477

Quoted 10 lines
boot/uboot/Config.in +9 -0
+
+config BR2_TARGET_UBOOT_EXT_DTB_PATH
+       string "Path to external DTB"
+       depends on BR2_TARGET_UBOOT_EXT_DTB
+       help
+         Path to external DTB to be put in the U-Boot image.
+         Prepend ${TOPDIR}/ to specify paths relative to the top
+         buildroot source directory.
+
 endif

Would the existing BR2_TARGET_UBOOT_CUSTOM_DTS_PATH option already allow you to place your custom DTS files? Then to use them, you would need to either add a kconfig BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES fragment to build on your default board kconfig or if you have a custom board, set the kconfig path in BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE to your custom kconfig.

I believe the combination KCONFIG values that point at DTS files can get your BR2_TARGET_UBOOT_CUSTOM_DTS_PATH dts files included in the uboot build without setting EXT_DTB. What do you think?

Matt

#2 lore raw

PATCH 1/1 uboot: support external DTB in U-Boot images

Hi Matthew,

Quoted 46 lines · Matthew Weber

Clemens,

Quoted 24 lines · Clemens Gruber

Allows signed FIT images to be verified with the public key in the DTB. The public key is stored in the bootloader image, which must have been verified by the previous stage in the trust chain, before loading it.

---
 boot/uboot/Config.in | 14 ++++++++++++++
 boot/uboot/uboot.mk  |  5 +++++
 2 files changed, 19 insertions(+)
boot/uboot/Config.in +5 -0
index 264f343767..620aa02bb9 100644
@@ -460,6 +460,20 @@ config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH
          To use this device tree source file, the U-Boot configuration
          file must refer to it.
 
+config BR2_TARGET_UBOOT_EXT_DTB
+       bool "External DTB"
+       help
+         Put an external DTB in the U-Boot image. Used to store public
+         keys for verifying signed FIT images.

boot/uboot/Config.in config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH · line 477

Quoted 10 lines
boot/uboot/Config.in +9 -0
+
+config BR2_TARGET_UBOOT_EXT_DTB_PATH
+       string "Path to external DTB"
+       depends on BR2_TARGET_UBOOT_EXT_DTB
+       help
+         Path to external DTB to be put in the U-Boot image.
+         Prepend ${TOPDIR}/ to specify paths relative to the top
+         buildroot source directory.
+
 endif

Would the existing BR2_TARGET_UBOOT_CUSTOM_DTS_PATH option already allow you to place your custom DTS files? Then to use them, you would need to either add a kconfig BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES fragment to build on your default board kconfig or if you have a custom board, set the kconfig path in BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE to your custom kconfig.

Quoted 3 lines

I believe the combination KCONFIG values that point at DTS files can get your BR2_TARGET_UBOOT_CUSTOM_DTS_PATH dts files included in the uboot build without setting EXT_DTB. What do you think?

This would not work, afaik. The dtb passed with EXT_DTB is not just a "normal" device tree blob, directly generated from a dts file. It's a special dtb into which the public keys (used to verify the FIT image signatures) were written once and the blob is then reused everytime the bootloader image is generated.

It is described in chapter 5 of
https://wiki.linaro.org/WorkingGroups/Security/Verified-U-boot

And also in
http://git.denx.de/?p=u-boot.git;a=blob;f=doc/uImage.FIT/beaglebone_vboot.txt

Best regards,
Clemens

#3 lore raw

PATCH 1/1 uboot: support external DTB in U-Boot images

Clemens,

Quoted 54 lines · Clemens Gruber

Hi Matthew,

Quoted 46 lines · Matthew Weber

Clemens,

Quoted 24 lines · Clemens Gruber

Allows signed FIT images to be verified with the public key in the DTB. The public key is stored in the bootloader image, which must have been verified by the previous stage in the trust chain, before loading it.

---
 boot/uboot/Config.in | 14 ++++++++++++++
 boot/uboot/uboot.mk  |  5 +++++
 2 files changed, 19 insertions(+)
boot/uboot/Config.in +5 -0
index 264f343767..620aa02bb9 100644
@@ -460,6 +460,20 @@ config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH
          To use this device tree source file, the U-Boot configuration
          file must refer to it.
 
+config BR2_TARGET_UBOOT_EXT_DTB
+       bool "External DTB"
+       help
+         Put an external DTB in the U-Boot image. Used to store public
+         keys for verifying signed FIT images.

boot/uboot/Config.in config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH · line 477

Quoted 10 lines
boot/uboot/Config.in +9 -0
+
+config BR2_TARGET_UBOOT_EXT_DTB_PATH
+       string "Path to external DTB"
+       depends on BR2_TARGET_UBOOT_EXT_DTB
+       help
+         Path to external DTB to be put in the U-Boot image.
+         Prepend ${TOPDIR}/ to specify paths relative to the top
+         buildroot source directory.
+
 endif

Would the existing BR2_TARGET_UBOOT_CUSTOM_DTS_PATH option already allow you to place your custom DTS files? Then to use them, you would need to either add a kconfig BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES fragment to build on your default board kconfig or if you have a custom board, set the kconfig path in BR2_TARGET_UBOOT_CUSTOM_CONFIG_FILE to your custom kconfig.

Quoted 3 lines

I believe the combination KCONFIG values that point at DTS files can get your BR2_TARGET_UBOOT_CUSTOM_DTS_PATH dts files included in the uboot build without setting EXT_DTB. What do you think?

Quoted 6 lines

This would not work, afaik. The dtb passed with EXT_DTB is not just a "normal" device tree blob, directly generated from a dts file. It's a special dtb into which the public keys (used to verify the FIT image signatures) were written once and the blob is then reused everytime the bootloader image is generated.

Ok sure, for a pre-built keys only blob. (ie what mkimage puts out as part of the signing process)

Couple items I can think to mention
1) From when we looked at verified boot for a project, the blob is appended to the boot binary when a uboot.bin format is used. We found that there were cases where we wanted a boot.bin without the dtb appended and with. If we add the EX_DTB option, the output will always include that file per the defconfig. As once an image is built that way, at runtime it solely enforces verified boot for all items you're loading. This didn't seem ideal for factory/lab integration. Similar to rootfs building, it's nice to have the unwrapped file and final compressed/wrapped. A solution which would leave both original uboot and the one with signatures would be to do the DTB append in Buildroot's uboot.mk's logic. However you'd have to first confirm that the DTB is only appended in the case of the raw uboot.bin binary case and no other output formats.

2) It would be possible to handle the (1) case in a post image script without the proposed Buildroot change, if the .bin is the only file every appended with the DTB.

3) As another option, you could reverse compile the DTB that comes out of mkimage and include the source using the BR2_TARGET_UBOOT_CUSTOM_DTS_PATH and an include in your existing dts. That way everything is compiled at build time and not binaries are committed to repositories for the DTB. This also would not required the proposed Buildroot change.

So it would be good to confirm if the EXT_DTB provides support for non uboot.bin formats. If that's the case, then a BR2_TARGET_UBOOT_EXT_DTB_PATH option or reverse compile your DTB, make the most sense vs using a post script.

Matt

#4 lore raw

PATCH 1/1 uboot: support external DTB in U-Boot images

In reply to Clemens Gruber

Hello,

Quoted 5 lines · On Sun, 4 Mar 2018 18:18:15 +0100 Clemens Gruber…

Allows signed FIT images to be verified with the public key in the DTB. The public key is stored in the bootloader image, which must have been verified by the previous stage in the trust chain, before loading it.

For the record, this patch is a bit related to
http://patchwork.ozlabs.org/patch/1018245/, on which I made an alternate proposal, that would cover both this patch and patch 1018245.

(This e-mail is sent mainly so that others looking at patchwork for this patch will realize there is some related discussion in another thread.)

Thanks,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com