Skip to contentSkip to conversation

ath10k: Add support for extended HTT aggr msg support

PATCH In review Govind Singh 2 participants 3 messages Jan 16, 2019 – Feb 4, 2019 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ath10k: Add support for extended HTT aggr msg support

HTT aggr message parameter in HL2.0 fw are different in comparison to legacy fw version. Fill correct HTT aggr msg parameter for targets using HL2.0 firmware.

---
 drivers/net/wireless/ath/ath10k/htt.c    |  2 +-
 drivers/net/wireless/ath/ath10k/htt.h    | 11 ++++++
 drivers/net/wireless/ath/ath10k/htt_tx.c | 49 ++++++++++++++++++++++++
 3 files changed, 61 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/htt.c +1 -1
index 21a67f82f037..55c716499830 100644
@@ -268,7 +268,7 @@ int ath10k_htt_setup(struct ath10k_htt *htt)
 		return status;
 	}
 
-	status = ath10k_htt_h2t_aggr_cfg_msg(htt,
+	status = htt->tx_ops->htt_h2t_aggr_cfg_msg(htt,
 					     htt->max_num_ampdu,
 					     htt->max_num_amsdu);
 	if (status) {
drivers/net/wireless/ath/ath10k/htt.h +11 -0
index a76f7c9e2199..f5fa86f6efad 100644
@@ -357,6 +357,13 @@ struct htt_aggr_conf {
 	u8 max_num_amsdu_subframes;
 } __packed;
 
+struct htt_aggr_conf_v2 {
+	u8 max_num_ampdu_subframes;
+	/* amsdu_subframes is limited by 0x1F mask */
+	u8 max_num_amsdu_subframes;
+	u8 reserved;
+} __packed;
+
 #define HTT_MGMT_FRM_HDR_DOWNLOAD_LEN 32
 struct htt_mgmt_tx_desc_qca99x0 {
 	__le32 rate;
@@ -1650,6 +1657,7 @@ struct htt_cmd {
 		struct htt_stats_req stats_req;
 		struct htt_oob_sync_req oob_sync_req;
 		struct htt_aggr_conf aggr_conf;
+		struct htt_aggr_conf_v2 aggr_conf_v2;
 		struct htt_frag_desc_bank_cfg32 frag_desc_bank_cfg32;
 		struct htt_frag_desc_bank_cfg64 frag_desc_bank_cfg64;
 		struct htt_tx_fetch_resp tx_fetch_resp;
@@ -1890,6 +1898,9 @@ struct ath10k_htt_tx_ops {
 		      struct sk_buff *msdu);
 	int (*htt_alloc_txbuff)(struct ath10k_htt *htt);
 	void (*htt_free_txbuff)(struct ath10k_htt *htt);
+	int (*htt_h2t_aggr_cfg_msg)(struct ath10k_htt *htt,
+				    u8 max_subfrms_ampdu,
+				    u8 max_subfrms_amsdu);
 };
 
 static inline int ath10k_htt_send_rx_ring_cfg(struct ath10k_htt *htt)
drivers/net/wireless/ath/ath10k/htt_tx.c +49 -0

67 lines not on this page · raw message

Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#1 lore raw
Quoted 6 lines · Govind Singh

HTT aggr message parameter in HL2.0 fw are different in comparison to legacy fw version. Fill correct HTT aggr msg parameter for targets using HL2.0 firmware.

Patch applied to ath-next branch of ath.git, thanks.

5cbb11747750 ath10k: Add support for extended HTT aggr msg support

Signature · 9 lines
https://patchwork.kernel.org/patch/10765773/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#2 lore raw
In reply to Govind Singh
Quoted 6 lines · Govind Singh

HTT aggr message parameter in HL2.0 fw are different in comparison to legacy fw version. Fill correct HTT aggr msg parameter for targets using HL2.0 firmware.

Patch applied to ath-next branch of ath.git, thanks.

5cbb11747750 ath10k: Add support for extended HTT aggr msg support

Signature · 3 lines
https://patchwork.kernel.org/patch/10765773/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches