Skip to contentSkip to conversation

ARM: dts: vf610: Add ZII SSMB DTU board

PATCH Applied Andrew Lunn 2 participants 2 messages Feb 5, 2019 – Feb 11, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ARM: dts: vf610: Add ZII SSMB DTU board

Add the Zodiac Digital Tapping Unit, a VF610 based network device with 5 Ethernet ports. One of these ports supports 1000Base-T2.

---
v2: Use generic node names

---
 arch/arm/boot/dts/Makefile               |   1 +
 arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 311 +++++++++++++++++++++++
 2 files changed, 312 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
arch/arm/boot/dts/Makefile +1 -0
index bd40148a15b2..df9c519a0433 100644
@@ -599,6 +599,7 @@ dtb-$(CONFIG_SOC_VF610) += \
 	vf610-zii-dev-rev-b.dtb \
 	vf610-zii-dev-rev-c.dtb \
 	vf610-zii-scu4-aib.dtb \
+	vf610-zii-ssmb-dtu.dtb \
 	vf610-zii-ssmb-spu3.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
 	imx23-evk.dtb \
arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts new file +311 -0

311 lines not on this page · raw message

Signature · 7 lines
2.20.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel