net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
PATCH v2 1/3 net/macb: bindings doc/trivial: fix documentation for sama5d3 10/100 interface
This removes a line left while adding the correct compatibility string for sama5d3 10/100 interface. Now use the "atmel,sama5d3-macb" string.
--- Documentation/devicetree/bindings/net/macb.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
Documentation/devicetree/bindings/net/macb.txt +1 -2
@@ -3,8 +3,7 @@ Required properties: - compatible: Should be "cdns,[<chip>-]{macb|gem}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. - Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP - available on sama5d3 SoCs. + Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs. Use "cdns,np4-macb" for NP4 SoC devices. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
Signature · 1 line
2.17.1
PATCH v2 2/3 net/macb: bindings doc: add sam9x60 binding
Add the compatibility sting documentation for sam9x60 10/100 interface.
---
Hi Rob,
Your tag is missing for this patch.
Documentation/devicetree/bindings/net/macb.txt | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/net/macb.txt +1 -0
@@ -4,6 +4,7 @@ Required properties: - compatible: Should be "cdns,[<chip>-]{macb|gem}" Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC. Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs. + Use "cdns,sam9x60-macb" for Microchip sam9x60 SoC. Use "cdns,np4-macb" for NP4 SoC devices. Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb". Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
Signature · 1 line
2.17.1
Re: [PATCH v2 2/3] net/macb: bindings doc: add sam9x60 binding
From: Nicolas Ferre <[email protected]>
Date: Wed, 6 Feb 2019 18:56:09 +0100
Quoted 3 lines
Add the compatibility sting documentation for sam9x60 10/100 interface.
Signed-off-by Nicolas Ferre <[email protected]>
Applied to net-next.
PATCH v2 3/3 net: macb: add sam9x60-macb compatibility string
In reply to Nicolas FerreAdd a new compatibility string for this product. It's using at91sam9260-macb layout but has a newer hardware revision: it's safer to use its own string.
---
v2: applies on top of next-20190206
drivers/net/ethernet/cadence/macb_main.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/cadence/macb_main.c +1 -0
@@ -3943,6 +3943,7 @@ static const struct of_device_id macb_dt_ids[] = { { .compatible = "cdns,np4-macb", .data = &np4_config }, { .compatible = "cdns,pc302-gem", .data = &pc302gem_config }, { .compatible = "cdns,gem", .data = &pc302gem_config }, + { .compatible = "cdns,sam9x60-macb", .data = &at91sam9260_config }, { .compatible = "atmel,sama5d2-gem", .data = &sama5d2_config }, { .compatible = "atmel,sama5d3-gem", .data = &sama5d3_config }, { .compatible = "atmel,sama5d3-macb", .data = &sama5d3macb_config },
Signature · 1 line
2.17.1
Re: [PATCH v2 3/3] net: macb: add sam9x60-macb compatibility string
From: Nicolas Ferre <[email protected]>
Date: Wed, 6 Feb 2019 18:56:10 +0100
Quoted 5 lines
Add a new compatibility string for this product. It's using at91sam9260-macb layout but has a newer hardware revision: it's safer to use its own string.
Signed-off-by Nicolas Ferre <[email protected]>
Applied to net-next.
From: Nicolas Ferre <[email protected]>
Date: Wed, 6 Feb 2019 18:56:08 +0100
Quoted 5 lines
This removes a line left while adding the correct compatibility string for sama5d3 10/100 interface. Now use the "atmel,sama5d3-macb" string.
Signed-off-by Nicolas Ferre <[email protected]>Reviewed-by Rob Herring <[email protected]>
Applied to net-next.