Thermal throttling for SDM845
v4 cover Thermal throttling for SDM845
Only one patch left in this series. This patch depends on [1] and [2] which have been merged through by Rafael through the power tree.
Changes since v3:
- first trip point increased to 90 degrees based on Matthias' testing
- Added Acks
Changes since v2:
- Split up the series into auto-register series for cpufreq[1] and miscellaneous patches[2][3]. [1] and [2] are needed for this patch to work.
- Merged the two DT patches into one. We end up with 2 passive and 1 critical trip point.
- Remove unncessary cooling map for critical trip point, we're shutting down at that trip, duh!
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/patchwork/patch/1033953/
[3] https://lore.kernel.org/patchwork/cover/1033970/
Amit Kucheria (1):
arm64: dts: sdm845: wireup the thermal trip points to cpufreq
arch/arm64/boot/dts/qcom/sdm845.dtsi | 241 ++++++++++++++++++++++++--- 1 file changed, 217 insertions(+), 24 deletions(-)
Signature · 1 line
2.17.1
PATCH v4 1/1 arm64: dts: sdm845: wireup the thermal trip points to cpufreq
Since all cpus in the big and little clusters, respectively, are in the same frequency domain, use all of them for mitigation in the cooling-map. We end up with two cooling devices - one each for the big and little clusters.
--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 241 ++++++++++++++++++++++++--- 1 file changed, 217 insertions(+), 24 deletions(-)
arch/arm64/boot/dts/qcom/sdm845.dtsi +217 -24
@@ -13,6 +13,7 @@ #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>;
@@ -99,6 +100,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache";
@@ -114,6 +116,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { compatible = "cache";
@@ -126,6 +129,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { compatible = "cache";
@@ -138,6 +142,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache";
@@ -150,6 +155,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x400>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { compatible = "cache";
@@ -162,6 +168,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x500>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { compatible = "cache";
@@ -174,6 +181,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x600>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { compatible = "cache";
@@ -186,6 +194,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x700>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { compatible = "cache";
@@ -1691,18 +1700,41 @@ thermal-sensors = <&tsens0 1>; trips { - cpu_alert0: trip0 { - temperature = <75000>; + cpu0_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1-thermal {
@@ -1712,18 +1744,41 @@ thermal-sensors = <&tsens0 2>; trips { - cpu_alert1: trip0 { - temperature = <75000>; + cpu1_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu2-thermal {
@@ -1733,18 +1788,41 @@ thermal-sensors = <&tsens0 3>; trips { - cpu_alert2: trip0 { - temperature = <75000>; + cpu2_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu3-thermal {
@@ -1754,18 +1832,41 @@ thermal-sensors = <&tsens0 4>; trips { - cpu_alert3: trip0 { - temperature = <75000>; + cpu3_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu4-thermal {
@@ -1775,18 +1876,41 @@ thermal-sensors = <&tsens0 7>; trips { - cpu_alert4: trip0 { - temperature = <75000>; + cpu4_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit4: trip1 { + cpu4_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu5-thermal {
@@ -1796,18 +1920,41 @@ thermal-sensors = <&tsens0 8>; trips { - cpu_alert5: trip0 { - temperature = <75000>; + cpu5_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit5: trip1 { + cpu5_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu6-thermal {
@@ -1817,18 +1964,41 @@ thermal-sensors = <&tsens0 9>; trips { - cpu_alert6: trip0 { - temperature = <75000>; + cpu6_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit6: trip1 { + cpu6_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu7-thermal {
@@ -1838,18 +2008,41 @@ thermal-sensors = <&tsens0 10>; trips { - cpu_alert7: trip0 { - temperature = <75000>; + cpu7_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit7: trip1 { + cpu7_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; };
Signature · 1 line
2.17.1
Re: [PATCH v4 1/1] arm64: dts: sdm845: wireup the thermal trip points to cpufreq
Quoted 437 lines · Amit Kucheria
Since all cpus in the big and little clusters, respectively, are in the same frequency domain, use all of them for mitigation in the cooling-map. We end up with two cooling devices - one each for the big and little clusters.
Signed-off-by Amit Kucheria <[email protected]>Acked-by Eduardo Valentin <[email protected]>--- arch/arm64/boot/dts/qcom/sdm845.dtsi | 241 ++++++++++++++++++++++++--- 1 file changed, 217 insertions(+), 24 deletions(-)arch/arm64/boot/dts/qcom/sdm845.dtsi +210
-24@@ -13,6 +13,7 @@ #include <dt-bindings/reset/qcom,sdm845-aoss.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,gcc-sdm845.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>;@@ -99,6 +100,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache";@@ -114,6 +116,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { compatible = "cache";@@ -126,6 +129,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { compatible = "cache";@@ -138,6 +142,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache";@@ -150,6 +155,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x400>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { compatible = "cache";@@ -162,6 +168,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x500>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { compatible = "cache";@@ -174,6 +181,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x600>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { compatible = "cache";@@ -186,6 +194,7 @@ compatible = "qcom,kryo385"; reg = <0x0 0x700>; enable-method = "psci"; + #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { compatible = "cache";@@ -1691,18 +1700,41 @@ thermal-sensors = <&tsens0 1>; trips { - cpu_alert0: trip0 { - temperature = <75000>; + cpu0_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit0: trip1 { + cpu0_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu1-thermal {@@ -1712,18 +1744,41 @@ thermal-sensors = <&tsens0 2>; trips { - cpu_alert1: trip0 { - temperature = <75000>; + cpu1_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit1: trip1 { + cpu1_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu2-thermal {@@ -1733,18 +1788,41 @@ thermal-sensors = <&tsens0 3>; trips { - cpu_alert2: trip0 { - temperature = <75000>; + cpu2_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit2: trip1 { + cpu2_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu3-thermal {@@ -1754,18 +1832,41 @@ thermal-sensors = <&tsens0 4>; trips { - cpu_alert3: trip0 { - temperature = <75000>; + cpu3_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit3: trip1 { + cpu3_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu4-thermal {@@ -1775,18 +1876,41 @@ thermal-sensors = <&tsens0 7>; trips { - cpu_alert4: trip0 { - temperature = <75000>; + cpu4_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit4: trip1 { + cpu4_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu4_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu5-thermal {@@ -1796,18 +1920,41 @@ thermal-sensors = <&tsens0 8>; trips { - cpu_alert5: trip0 { - temperature = <75000>; + cpu5_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit5: trip1 { + cpu5_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu5_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu6-thermal {@@ -1817,18 +1964,41 @@ thermal-sensors = <&tsens0 9>; trips { - cpu_alert6: trip0 { - temperature = <75000>; + cpu6_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit6: trip1 { + cpu6_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu6_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; cpu7-thermal {@@ -1838,18 +2008,41 @@ thermal-sensors = <&tsens0 10>; trips { - cpu_alert7: trip0 { - temperature = <75000>; + cpu7_alert0: trip-point@0 { + temperature = <90000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit7: trip1 { + cpu7_alert1: trip-point@1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_crit: cpu_crit { temperature = <110000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&cpu7_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 {
arch/arm64/boot/dts/qcom/sdm845.dtsi line 2048
Quoted 10 lines
arch/arm64/boot/dts/qcom/sdm845.dtsi +7
-0+ trip = <&cpu7_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; }; };
Thanks
Matthias