USB: serial: cp210x: Add ID for Ingenico 3070
Subsystems (3)
PATCH 1/1 USB: serial: cp210x: Add ID for Ingenico 3070
Here is how this device appears in kernel log:
usb 3-1: new full-speed USB device number 18 using xhci_hcd usb 3-1: New USB device found, idVendor=0b00, idProduct=3070 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Ingenico 3070
usb 3-1: Manufacturer: Silicon Labs
usb 3-1: SerialNumber: 0001
Apparently this is a POS terminal with embedded USB-to-Serial converter.
--- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+)
drivers/usb/serial/cp210x.c +1 -0
@@ -61,6 +61,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */ { USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */ + { USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */ { USB_DEVICE(0x0BED, 0x1100) }, /* MEI (TM) Cashflow-SC Bill/Voucher Acceptor */ { USB_DEVICE(0x0BED, 0x1101) }, /* MEI series 2000 Combo Acceptor */ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
Johan Hovold
maintainerQuoted 9 lines · Ivan Mironov
Here is how this device appears in kernel log:
usb 3-1: new full-speed USB device number 18 using
xhci_hcdusb 3-1: New USB device found, idVendor=0b00, idProduct=3070 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-1: Product: Ingenico 3070
usb 3-1: Manufacturer: Silicon Labs
usb 3-1: SerialNumber: 0001
Quoted 4 lines
Apparently this is a POS terminal with embedded USB-to-Serial converter.
Signed-off-by Ivan Mironov <[email protected]>
Now applied, thanks.
Johan