package: add new package: fluent-bit
PATCH 1/1 package: add new package: fluent-bit
From https://fluentbit.io/:
Fluent Bit is an open source and multi-platform Log Processor and Forwarder which allows you to collect data/logs from different sources, unify and send them to multiple destinations.
--- package/Config.in | 1 + package/fluent-bit/Config.in | 10 ++++++++++ package/fluent-bit/fluent-bit.mk | 23 +++++++++++++++++++++++ 3 files changed, 34 insertions(+) create mode 100644 package/fluent-bit/Config.in create mode 100644 package/fluent-bit/fluent-bit.mk
package/Config.in +1 -0
@@ -1445,6 +1445,7 @@ endmenu menu "Logging" source "package/eventlog/Config.in" + source "package/fluent-bit/Config.in" source "package/glog/Config.in" source "package/liblog4c-localtime/Config.in" source "package/liblogging/Config.in"
package/fluent-bit/Config.in new file +10 -0
@@ -0,0 +1,10 @@ +config BR2_PACKAGE_FLUENT_BIT + bool "fluent-bit" + depends on BR2_INSTALL_LIBSTDCPP + help + Fluent Bit is an open source and multi-platform Log + processor and forwarder which allows you to collect + data/logs from different sources, unify and send them to + multiple destinations. + + http://fluentbit.io
package/fluent-bit/fluent-bit.mk new file +23 -0
@@ -0,0 +1,23 @@ +################################################################################ +# +# fluent +# +################################################################################ + +FLUENT_BIT_VERSION=v1.0.4 +FLUENT_BIT_SITE=https://github.com/fluent/fluent-bit.git +FLUENT_BIT_SITE_METHOD=git +FLUENT_BIT_INSTALL_STAGING = YES +FLUENT_BIT_DEPENDENCIES = zlib + +# Disable LuaJIT and filter_lua support +FLUENT_BIT_CONF_OPTS += -DFLB_LUAJIT=OFF -DFLB_FILTER_LUA=OFF + +# Disable Library and examples +FLUENT_BIT_CONF_OPTS += -DFLB_SHARED_LIB=OFF -DBUILD_SHARED_LIBS=OFF +FLUENT_BIT_CONF_OPTS += -DFLB_EXAMPLES=OFF + +# Ensure that uses of autoconf behave with cross-compliation +FLUENT_BIT_CONF_OPTS += -DGNU_HOST=$(GNU_TARGET_NAME) + +$(eval $(cmake-package))
Signature · 1 line
2.20.1
PATCH 1/1 package: add new package: fluent-bit
Kevin,
Quoted 7 lines · Kevin Hilman
From https://fluentbit.io/:
Fluent Bit is an open source and multi-platform Log Processor and Forwarder which allows you to collect data/logs from different sources, unify and send them to multiple destinations.
Thanks for sending the patch, see a few comments below.
Quoted 27 lines
Signed-off-by Kevin Hilman <[email protected]>--- package/Config.in | 1 + package/fluent-bit/Config.in | 10 ++++++++++ package/fluent-bit/fluent-bit.mk | 23 +++++++++++++++++++++++ 3 files changed, 34 insertions(+) create mode 100644 package/fluent-bit/Config.in create mode 100644 package/fluent-bit/fluent-bit.mkpackage/Config.in +1
-0@@ -1445,6 +1445,7 @@ endmenu menu "Logging" source "package/eventlog/Config.in" + source "package/fluent-bit/Config.in" source "package/glog/Config.in" source "package/liblog4c-localtime/Config.in" source "package/liblogging/Config.in"package/fluent-bit/Config.in new file +0
-0
package/fluent-bit/Config.in line 3
Quoted 3 lines
package/fluent-bit/Config.in new file +3
-0@@ -0,0 +1,10 @@ +config BR2_PACKAGE_FLUENT_BIT + bool "fluent-bit" + depends on BR2_INSTALL_LIBSTDCPP
Looks like some architectural limitations? (x86 / ARM)
https://docs.fluentbit.io/manual/installation/requirements
You could also run a ./util/test-pkg build to see if there are any std library limitations with musl/uclibc/glibc. To do that you create a new file with your BR2_PACKAGE_FLUENT_BIT=y and then call the script with that file like the following.
./utils/test-pkg -d <build-test-dir> -c <cfg_file> -a
Quoted 13 lines
package/fluent-bit/Config.in new file +7
-0+ help + Fluent Bit is an open source and multi-platform Log + processor and forwarder which allows you to collect + data/logs from different sources, unify and send them to + multiple destinations. + + http://fluentbit.iopackage/fluent-bit/fluent-bit.mk new file +0
-0
package/fluent-bit/fluent-bit.mk line 10
Quoted 10 lines
package/fluent-bit/fluent-bit.mk new file +10
-0@@ -0,0 +1,23 @@ +################################################################################ +# +# fluent +# +################################################################################ + +FLUENT_BIT_VERSION=v1.0.4 +FLUENT_BIT_SITE=https://github.com/fluent/fluent-bit.git +FLUENT_BIT_SITE_METHOD=git +FLUENT_BIT_INSTALL_STAGING = YES
What is used from staging?
package/fluent-bit/fluent-bit.mk line 11
Quoted 1 line
package/fluent-bit/fluent-bit.mk new file +1
-0+FLUENT_BIT_DEPENDENCIES = zlib
You'll need to add a select in your Config.in after your depends.
Quoted 19 lines
package/fluent-bit/fluent-bit.mk new file +12
-1+ +# Disable LuaJIT and filter_lua support +FLUENT_BIT_CONF_OPTS += -DFLB_LUAJIT=OFF -DFLB_FILTER_LUA=OFF + +# Disable Library and examples +FLUENT_BIT_CONF_OPTS += -DFLB_SHARED_LIB=OFF -DBUILD_SHARED_LIBS=OFF +FLUENT_BIT_CONF_OPTS += -DFLB_EXAMPLES=OFF + +# Ensure that uses of autoconf behave with cross-compliation +FLUENT_BIT_CONF_OPTS += -DGNU_HOST=$(GNU_TARGET_NAME) + +$(eval $(cmake-package)) --2.20.1
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Signature · 23 lines
Matthew Weber | Pr. Software Engineer | Commercial Avionics COLLINS AEROSPACE 400 Collins Road NE, Cedar Rapids, Iowa 52498, USA Tel: +1 319 295 7349 | FAX: +1 319 263 6099 matthew.weber at collins.com | collinsaerospace.com CONFIDENTIALITY WARNING: This message may contain proprietary and/or privileged information of Collins Aerospace and its affiliated companies. If you are not the intended recipient, please 1) Do not disclose, copy, distribute or use this message or its contents. 2) Advise the sender by return email. 3) Delete all copies (including all attachments) from your computer. Your cooperation is greatly appreciated. Any export restricted material should be shared using my matthew.weber at corp.rockwellcollins.com address.
PATCH 1/1 package: add new package: fluent-bit
Kevin,
Quoted 6 lines · Matthew Weber
Kevin,
Quoted 1 line · Kevin Hilman
Quoted 8 lines
Quoted 6 lines
From https://fluentbit.io/:
Fluent Bit is an open source and multi-platform Log Processor and Forwarder which allows you to collect data/logs from different sources, unify and send them to multiple destinations.
Thanks for sending the patch, see a few comments below.
Sorry keyboard shortcuts sent my email early. More below.
Quoted 67 lines
Quoted 28 lines
Signed-off-by Kevin Hilman <[email protected]>--- package/Config.in | 1 + package/fluent-bit/Config.in | 10 ++++++++++ package/fluent-bit/fluent-bit.mk | 23 +++++++++++++++++++++++ 3 files changed, 34 insertions(+) create mode 100644 package/fluent-bit/Config.in create mode 100644 package/fluent-bit/fluent-bit.mkpackage/Config.in +1
-0@@ -1445,6 +1445,7 @@ endmenu menu "Logging" source "package/eventlog/Config.in" + source "package/fluent-bit/Config.in" source "package/glog/Config.in" source "package/liblog4c-localtime/Config.in" source "package/liblogging/Config.in"package/fluent-bit/Config.in new file +0
-0package/fluent-bit/Config.in line 3
Quoted 3 lines
package/fluent-bit/Config.in new file +3
-0@@ -0,0 +1,10 @@ +config BR2_PACKAGE_FLUENT_BIT + bool "fluent-bit" + depends on BR2_INSTALL_LIBSTDCPPLooks like some architectural limitations? (x86 / ARM)
https://docs.fluentbit.io/manual/installation/requirementsYou could also run a ./util/test-pkg build to see if there are any std library limitations with musl/uclibc/glibc. To do that you create a new file with your BR2_PACKAGE_FLUENT_BIT=y and then call the script with that file like the following.
./utils/test-pkg -d <build-test-dir> -c <cfg_file> -aQuoted 13 lines
package/fluent-bit/Config.in new file +7
-0+ help + Fluent Bit is an open source and multi-platform Log + processor and forwarder which allows you to collect + data/logs from different sources, unify and send them to + multiple destinations. + + http://fluentbit.iopackage/fluent-bit/fluent-bit.mk new file +0
-0package/fluent-bit/fluent-bit.mk line 10
Quoted 10 lines
package/fluent-bit/fluent-bit.mk new file +10
-0@@ -0,0 +1,23 @@ +################################################################################ +# +# fluent +# +################################################################################ + +FLUENT_BIT_VERSION=v1.0.4 +FLUENT_BIT_SITE=https://github.com/fluent/fluent-bit.git +FLUENT_BIT_SITE_METHOD=git +FLUENT_BIT_INSTALL_STAGING = YESWhat is used from staging?
Quoted 4 lines
package/fluent-bit/fluent-bit.mk line 11
Quoted 1 line
package/fluent-bit/fluent-bit.mk new file +1
-0+FLUENT_BIT_DEPENDENCIES = zlibYou'll need to add a select in your Config.in after your depends.
select BR2_PACKAGE_ZLIB
Quoted 8 lines
package/fluent-bit/fluent-bit.mk line 18
Quoted 8 lines
package/fluent-bit/fluent-bit.mk new file +7
-0+ +# Disable LuaJIT and filter_lua support +FLUENT_BIT_CONF_OPTS += -DFLB_LUAJIT=OFF -DFLB_FILTER_LUA=OFF + +# Disable Library and examples +FLUENT_BIT_CONF_OPTS += -DFLB_SHARED_LIB=OFF -DBUILD_SHARED_LIBS=OFF +FLUENT_BIT_CONF_OPTS += -DFLB_EXAMPLES=OFF
Based on disabling the libraries, is the FLUENT_BIT_INSTALL_STAGING = YES required?
Thanks!
Matt