dt-bindings: regulator: update fixed-regulator example
Subsystems (2)
PATCH 1/1 dt-bindings: regulator: update fixed-regulator example
Fixed regulators do not have associated bus addresses and are typically placed directly under the root node where their names must still be unique despite not having a unit address.
Fix the malformed example node which had a unit address but no "reg" property by dropping the unit address.
Also, try to make the example more useful by using the recommended generic node name "regulator", but with a suffix reflecting the regulator name in order to make it unique.
--- .../devicetree/bindings/regulator/fixed-regulator.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/regulator/fixed-regulator.yaml +2 -2
@@ -52,9 +52,9 @@ required: examples: - | - abc: fixedregulator@0 { + reg_1v8: regulator-1v8 { compatible = "regulator-fixed"; - regulator-name = "fixed-supply"; + regulator-name = "1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 16 0>;
Signature · 1 line
2.20.1
Quoted 8 lines · Johan Hovold
Fixed regulators do not have associated bus addresses and are typically placed directly under the root node where their names must still be unique despite not having a unit address.
Fix the malformed example node which had a unit address but no "reg" property by dropping the unit address.
Quoted 8 lines
Also, try to make the example more useful by using the recommended generic node name "regulator", but with a suffix reflecting the regulator name in order to make it unique.
Signed-off-by Johan Hovold <[email protected]>--- .../devicetree/bindings/regulator/fixed-regulator.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)