Skip to contentSkip to conversation

ARC: Add nsimhs- and hsdk-standard configs

PATCH New Alexey Brodkin 2 participants 4 messages Feb 8, 2019 Synopsys ARC architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARC: Add nsimhs- and hsdk-standard configs

With ARC support ramping-up in upstream OE we're ready to build more complicated distributions and linux-yocto is a nice and configurable base for that.

This commit adds support of 1 simulated board (nSIM) and the mast affordable and powerful to date development board (HSDK).

Once Qemu port for ARC is functional (it's being actively developed now) we'll switch from nSIM to Qemu.

Still it would be really good to keep nSIM support in linux-yocto for now as it allows for simpler testing as compared to real HW.

Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>
Cc Bruce Ashfield <bruce.ashfield at windriver.com>
---
 arch/arc/arc.cfg               |  8 ++++++
 arch/arc/arc.scc               |  5 ++++
 bsp/hsdk/hsdk-standard.scc     |  7 +++++
 bsp/hsdk/hsdk.cfg              | 61 ++++++++++++++++++++++++++++++++++++++++++
 bsp/hsdk/hsdk.scc              |  7 +++++
 bsp/nsimhs/nsimhs-standard.scc |  7 +++++
 bsp/nsimhs/nsimhs.cfg          |  9 +++++++
 bsp/nsimhs/nsimhs.scc          |  1 +
 8 files changed, 105 insertions(+)
 create mode 100644 arch/arc/arc.cfg
 create mode 100644 arch/arc/arc.scc
 create mode 100644 bsp/hsdk/hsdk-standard.scc
 create mode 100644 bsp/hsdk/hsdk.cfg
 create mode 100644 bsp/hsdk/hsdk.scc
 create mode 100644 bsp/nsimhs/nsimhs-standard.scc
 create mode 100644 bsp/nsimhs/nsimhs.cfg
 create mode 100644 bsp/nsimhs/nsimhs.scc
arch/arc/arc.cfg new file +8 -0
new file mode 100644
index 00000000..761f3ed9
@@ -0,0 +1,8 @@
+CONFIG_ARC=y
+CONFIG_HIGH_RES_TIMERS=y
+
+CONFIG_ARC_CACHE=y
+
+# Enable unwinding
+CONFIG_ARC_DBG=y
+CONFIG_ARC_DW2_UNWIND=y
arch/arc/arc.scc new file +5 -0
new file mode 100644
index 00000000..bcc7c330
@@ -0,0 +1,5 @@
+# patches are for everyone, but the kconfig data is just for ARC builds.
+if [ "$KARCH" = "arc" ]; then
+       kconf hardware arc.cfg
+       include cfg/timer/hz_100.scc
+fi
bsp/hsdk/hsdk-standard.scc new file +7 -0
new file mode 100644
index 00000000..29c46047
@@ -0,0 +1,7 @@
+define KMACHINE hsdk
+define KTYPE standard
+define KARCH arc
+
+include ktypes/standard/standard.scc
+
+include hsdk.scc
bsp/hsdk/hsdk.cfg new file +61 -0

61 lines not on this page · raw message

bsp/hsdk/hsdk.scc new file +7 -0
new file mode 100644
index 00000000..2cfcb654
@@ -0,0 +1,7 @@
+include features/input/input.scc
+include features/usb/ehci-hcd.scc
+include features/usb/ohci-hcd.scc
+
+include cfg/usb-mass-storage.scc
+
+kconf hardware hsdk.cfg
bsp/nsimhs/nsimhs-standard.scc new file +7 -0
new file mode 100644
index 00000000..da749cd0
@@ -0,0 +1,7 @@
+define KMACHINE nsimhs
+define KTYPE standard
+define KARCH arc
+
+include ktypes/standard/standard.scc
+
+include nsimhs.scc
bsp/nsimhs/nsimhs.cfg new file +9 -0
new file mode 100644
index 00000000..2475825d
@@ -0,0 +1,9 @@
+# ARCv2 ISA
+CONFIG_ISA_ARCV2=y
+
+# Legacy ARC UART
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+
+# Built-in .dtb
+CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
bsp/nsimhs/nsimhs.scc new file +1 -0
new file mode 100644
index 00000000..93a3ab1b
@@ -0,0 +1 @@
+kconf hardware nsimhs.cfg
Signature · 1 line
2.16.2
#1 lore raw

PATCH 1/1 ARC: Add nsimhs- and hsdk-standard configs

Quoted 5 lines · Alexey Brodkin

With ARC support ramping-up in upstream OE we're ready to build more complicated distributions and linux-yocto is a nice and configurable base for that.

Quoted 8 lines

This commit adds support of 1 simulated board (nSIM) and the mast affordable and powerful to date development board (HSDK).

Once Qemu port for ARC is functional (it's being actively developed now) we'll switch from nSIM to Qemu.

Still it would be really good to keep nSIM support in linux-yocto for now as it allows for simpler testing as compared to real HW.

Looks good to me, the configs make sense and are clean.

I'd put this on master so it would be available for the 5.x -dev kernel (and then any
future versions I release). If you want to test it on other versions (i.e. 4.19), let me
know and I can put it there as well.

Bruce

Quoted 183 lines
Signed-off-by Alexey Brodkin <abrodkin at synopsys.com>
Cc Bruce Ashfield <bruce.ashfield at windriver.com>
---
 arch/arc/arc.cfg               |  8 ++++++
 arch/arc/arc.scc               |  5 ++++
 bsp/hsdk/hsdk-standard.scc     |  7 +++++
 bsp/hsdk/hsdk.cfg              | 61 ++++++++++++++++++++++++++++++++++++++++++
 bsp/hsdk/hsdk.scc              |  7 +++++
 bsp/nsimhs/nsimhs-standard.scc |  7 +++++
 bsp/nsimhs/nsimhs.cfg          |  9 +++++++
 bsp/nsimhs/nsimhs.scc          |  1 +
 8 files changed, 105 insertions(+)
 create mode 100644 arch/arc/arc.cfg
 create mode 100644 arch/arc/arc.scc
 create mode 100644 bsp/hsdk/hsdk-standard.scc
 create mode 100644 bsp/hsdk/hsdk.cfg
 create mode 100644 bsp/hsdk/hsdk.scc
 create mode 100644 bsp/nsimhs/nsimhs-standard.scc
 create mode 100644 bsp/nsimhs/nsimhs.cfg
 create mode 100644 bsp/nsimhs/nsimhs.scc
arch/arc/arc.cfg new file +8 -0
new file mode 100644
index 00000000..761f3ed9
@@ -0,0 +1,8 @@
+CONFIG_ARC=y
+CONFIG_HIGH_RES_TIMERS=y
+
+CONFIG_ARC_CACHE=y
+
+# Enable unwinding
+CONFIG_ARC_DBG=y
+CONFIG_ARC_DW2_UNWIND=y
arch/arc/arc.scc new file +5 -0
new file mode 100644
index 00000000..bcc7c330
@@ -0,0 +1,5 @@
+# patches are for everyone, but the kconfig data is just for ARC builds.
+if [ "$KARCH" = "arc" ]; then
+       kconf hardware arc.cfg
+       include cfg/timer/hz_100.scc
+fi
bsp/hsdk/hsdk-standard.scc new file +7 -0
new file mode 100644
index 00000000..29c46047
@@ -0,0 +1,7 @@
+define KMACHINE hsdk
+define KTYPE standard
+define KARCH arc
+
+include ktypes/standard/standard.scc
+
+include hsdk.scc
bsp/hsdk/hsdk.cfg new file +61 -0
new file mode 100644
index 00000000..6d439021
@@ -0,0 +1,61 @@
+# ARCv2 ISA
+CONFIG_ISA_ARCV2=y
+
+# HSDK custom SoC
+CONFIG_ARC_SOC_HSDK=y
+CONFIG_SMP=y
+
+# Build default .dtb inside kernel image as a good starting point
+CONFIG_ARC_BUILTIN_DTB_NAME="hsdk"
+
+# Enable passing command-line and .dtb from U-Boot
+CONFIG_ARC_UBOOT_SUPPORT=y
+
+# Auto-selected by U-Boot support but if it is enabled slave cores won't start
+# CONFIG_ARC_SMP_HALT_ON_RESET is not set
+
+# Serial port
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+
+# DesignWare MobileStorage AKA DW MMC
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+
+# We use non-standard link base 0x9z to accommodate DCCM mapped to 0x8z
+# on cores 1 & 3.
+# Though we move xCCMs to 0x6z on early boot and may use all avaialble DDR
+# starting from normal 0x8z thus LINUX_RAM_BASE.
+CONFIG_LINUX_LINK_BASE=0x90000000
+CONFIG_LINUX_RAM_BASE=0x80000000
+
+# Ethernet
+CONFIG_NET_VENDOR_STMICRO=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_MICREL_PHY=y
+
+# GPIO
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DWAPB=y
+
+# Video
+CONFIG_DRM=y
+CONFIG_DRM_UDL=y
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+
+# Required for SOFTLOCKUP_DETECTOR
+CONFIG_DEBUG_KERNEL=y
+
+# Soft lock-up detector
+CONFIG_SOFTLOCKUP_DETECTOR=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
+
+# Performance counters
+CONFIG_PERF_EVENTS=y
bsp/hsdk/hsdk.scc new file +7 -0
new file mode 100644
index 00000000..2cfcb654
@@ -0,0 +1,7 @@
+include features/input/input.scc
+include features/usb/ehci-hcd.scc
+include features/usb/ohci-hcd.scc
+
+include cfg/usb-mass-storage.scc
+
+kconf hardware hsdk.cfg
bsp/nsimhs/nsimhs-standard.scc new file +7 -0
new file mode 100644
index 00000000..da749cd0
@@ -0,0 +1,7 @@
+define KMACHINE nsimhs
+define KTYPE standard
+define KARCH arc
+
+include ktypes/standard/standard.scc
+
+include nsimhs.scc
bsp/nsimhs/nsimhs.cfg new file +9 -0
new file mode 100644
index 00000000..2475825d
@@ -0,0 +1,9 @@
+# ARCv2 ISA
+CONFIG_ISA_ARCV2=y
+
+# Legacy ARC UART
+CONFIG_SERIAL_ARC=y
+CONFIG_SERIAL_ARC_CONSOLE=y
+
+# Built-in .dtb
+CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs"
bsp/nsimhs/nsimhs.scc new file +1 -1
new file mode 100644
index 00000000..93a3ab1b
@@ -0,0 +1 @@
+kconf hardware nsimhs.cfg
--

2.16.2

--
_______________________________________________
linux-yocto mailing list
linux-yocto at yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Signature · 3 lines
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II
#2 lore raw

PATCH 1/1 ARC: Add nsimhs- and hsdk-standard configs

Hi Bruce,

Quoted 24 lines

-----Original Message-----
From: linux-snps-arc <linux-snps-arc-bounces at lists.infradead.org> On Behalf Of Bruce Ashfield
Sent: Friday, February 8, 2019 6:16 PM
To: Alexey Brodkin <alexey.brodkin at synopsys.com>
Cc: linux-snps-arc at lists.infradead.org; Development list for the linux-yocto repositories <linux- yocto at yoctoproject.org>; Khem Raj <raj.khem at gmail.com>
Subject: Re: [linux-yocto] [PATCH] ARC: Add nsimhs- and hsdk-standard configs

Quoted 5 lines · Alexey Brodkin

With ARC support ramping-up in upstream OE we're ready to build more complicated distributions and linux-yocto is a nice and configurable base for that.

Quoted 8 lines

This commit adds support of 1 simulated board (nSIM) and the mast affordable and powerful to date development board (HSDK).

Once Qemu port for ARC is functional (it's being actively developed now) we'll switch from nSIM to Qemu.

Still it would be really good to keep nSIM support in linux-yocto for now as it allows for simpler testing as compared to real HW.

Quoted 7 lines

Looks good to me, the configs make sense and are clean.

I'd put this on master so it would be available for the 5.x -dev kernel (and then any
future versions I release). If you want to test it on other versions (i.e. 4.19), let me
know and I can put it there as well.

Well I prepared those based on 4.19 branch so I know it works there.

Now given 4.19 is the most recent LTS kernel is there a sense in adding these configs in 4.19 or OE/Yocto-wise 4.19 is no different than any other version?

Given linux-yocto might be a base for many different projects I'd like to make sure ARC boards are available there so there will be an easy way to build and run basic stuff.

-Alexey

#3 lore raw

PATCH 1/1 ARC: Add nsimhs- and hsdk-standard configs

Quoted 35 lines · Alexey Brodkin

Hi Bruce,

Quoted 24 lines

-----Original Message-----
From: linux-snps-arc <linux-snps-arc-bounces at lists.infradead.org> On Behalf Of Bruce Ashfield
Sent: Friday, February 8, 2019 6:16 PM
To: Alexey Brodkin <alexey.brodkin at synopsys.com>
Cc: linux-snps-arc at lists.infradead.org; Development list for the linux-yocto repositories <linux- yocto at yoctoproject.org>; Khem Raj <raj.khem at gmail.com>
Subject: Re: [linux-yocto] [PATCH] ARC: Add nsimhs- and hsdk-standard configs

Quoted 5 lines · Alexey Brodkin

With ARC support ramping-up in upstream OE we're ready to build more complicated distributions and linux-yocto is a nice and configurable base for that.

Quoted 8 lines

This commit adds support of 1 simulated board (nSIM) and the mast affordable and powerful to date development board (HSDK).

Once Qemu port for ARC is functional (it's being actively developed now) we'll switch from nSIM to Qemu.

Still it would be really good to keep nSIM support in linux-yocto for now as it allows for simpler testing as compared to real HW.

Quoted 7 lines

Looks good to me, the configs make sense and are clean.

I'd put this on master so it would be available for the 5.x -dev kernel (and then any
future versions I release). If you want to test it on other versions (i.e. 4.19), let me
know and I can put it there as well.

Quoted 8 lines

Well I prepared those based on 4.19 branch so I know it works there.

Now given 4.19 is the most recent LTS kernel is there a sense in adding these configs in 4.19 or OE/Yocto-wise 4.19 is no different than any other version?

Given linux-yocto might be a base for many different projects I'd like to make sure ARC boards are available there so there will be an easy way to build and run basic stuff.

That's ok with me, I'll queue it for 4.19 as well.

Bruce

Quoted 2 lines

-Alexey

Signature · 3 lines
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II