dt-bindings: arm: amlogic: add amediatech x96-max bindings
Subsystems (2)
Kevin Hilman
maintainerPATCH v3 1/2 dt-bindings: arm: amlogic: add amediatech x96-max bindings
Add new vendor for amediatech, and initial board: x96-max
---
v3: fixed the SoC name
Documentation/devicetree/bindings/arm/amlogic.txt | 1 + Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 2 files changed, 2 insertions(+)
Documentation/devicetree/bindings/arm/amlogic.txt +1 -0
@@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,s400" (Meson axg a113d) - "amlogic,u200" (Meson g12a s905d2) + - "amediatech,x96-max" (Meson g12a s905x2) Amlogic Meson Firmware registers Interface ------------------------------------------
Documentation/devicetree/bindings/vendor-prefixes.txt +1 -0
@@ -24,6 +24,7 @@ amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. +amediatech Shenzhen Amediatech Technology Co., Ltd amlogic Amlogic, Inc. ampire Ampire Co., Ltd. ams AMS AG
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Kevin Hilman
maintainerPATCH v3 2/2 arm64: dts: meson: add g12a x96 max board
Add the G12a (S905X2) based X96 Max board[1].
There is no branding for the manufacturer anywhere on the product, so it took some digging[2] to find the manufacturer. But since there's nothing about the maker on the product I've left it out of the DT name because 1) nobody will know that name and 2) keeps the DT filename shorter.
[1] https://www.cnx-software.com/2018/09/25/x96-max-amlogic-s905x2-tv-box/
[2] https://fccid.io/2AI6D-X96MAX
---
v3:
- add dtb to Makefile
- add link to FCC info
arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12a-x96-max.dts | 28 +++++++++++++++++++ 2 files changed, 29 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts new file +28 -0
@@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-g12a.dtsi" + +/ { + compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; + model = "Shenzhen Amediatech Technology Co., Ltd X96 Max"; + + aliases { + serial0 = &uart_AO; + }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; +};
Signature · 7 lines
2.20.1 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 9 lines · Kevin Hilman
Add new vendor for amediatech, and initial board: x96-max
Signed-off-by Kevin Hilman <[email protected]>---
v3: fixed the SoC nameDocumentation/devicetree/bindings/arm/amlogic.txt | 1 + Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
assuming Rob is fine with having vendor-prefixes.txt and <other binding doc> in one patch:
_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic