Skip to contentSkip to conversation

perf/core improvements and fixes

GIT PULL New Arnaldo Carvalho de Melo 2 participants 55 messages Feb 6, 2019 – Feb 9, 2019

Subsystems (8)
Stable branch x86 perf events s390 +4 more subsystems
lore
Share & tools
lore

Arnaldo Carvalho de Melo

author maintainer
#0 lore raw

Hi Ingo,

Please consider pulling,

- Arnaldo

Test results at the end of this message, as usual.

The following changes since commit ca3bb3d027f69ac3ab1dafb32bde2f5a3a44439c:

perf/ring_buffer: Convert ring_buffer.aux_refcount to refcount_t (2019-02-04 08:46:17 +0100)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-5.1-20190206

for you to fetch changes up to 16bd4321c2425d37031a902cdbf183e2cd099946:

perf auxtrace: Add timestamp to auxtrace errors (2019-02-06 11:20:32 -0300)

----------------------------------------------------------------
perf/core improvements and fixes:

Hardware tracing:

Adrian Hunter:

- Handle calls optimized into jumps to a different symbol
in the thread stack routines used to process hardware traces (Adrian Hunter)

Intel PT:

Adrian Hunter:

- Fix overlap calculation for padding.

- Fix CYC timestamp calculation after OVF.

- Packet splitting can only happen in 32-bit.

- Add timestamp to auxtrace errors.

ARM CoreSight:

Leo Yan:

- Add last instruction information in packet

- Set sample flags for instruction range, exception and return packets and for a trace discontinuity.

- Add exception number in exception packet

- Change tuple from traceID-CPU# to traceID-metadata

- Add traceID in packet

Mathieu Poirier:

- Add "sinks" group to PMU directory

- Use event attributes to send sink information to kernel

- Remove set_drv_config() API, no longer used.

perf annotate:

Jiri Olsa:

- Delay symbol annotation to the resort phase, speeding up 'perf report' startup.

perf record:

Alexey Budankov:

- Allow binding userspace buffers to NUMA nodes.

Symbols:

Adrian Hunter:

- Fix calculating of symbol sizes when splitting kallsyms into maps for kcore processing.

Vendor events:

William Cohen:

- Intel: Fix Load_Miss_Real_Latency on CLX

Misc:

Arnaldo Carvalho de Melo:

- Streamline headers, removing includes when all that is needed are just forward declarations, fixup the fallout for cases where headers should have been explicitely included but were instead obtained indirectly, by sheer luck.

- Add fallback versions for CPU_{OR,EQUAL}(), so that code using it continue to build on older systems where those were not yet introduced or in systems using some other libc than the GNU one where those helpers aren't present.

Documentation:

Changbin Du:

- Add documentation for BPF event selection.

----------------------------------------------------------------
Adrian Hunter (9):
perf tools: Fix split_kallsyms_for_kcore() for trampoline symbols
perf thread-stack: Tidy thread_stack__push_cp() usage
perf thread-stack: Tidy thread_stack__no_call_return() by adding more local variables perf thread-stack: Represent jmps to the start of a different symbol perf auxtrace: Define auxtrace record alignment
perf intel-pt: Fix overlap calculation for padding
perf intel-pt: Fix CYC timestamp calculation after OVF
perf intel-pt: Packet splitting can happen only on 32-bit
perf auxtrace: Add timestamp to auxtrace errors

Alexey Budankov (3):
perf record: Allocate affinity masks
perf record: Bind the AIO user space buffers to nodes perf record: Apply affinity masks when reading mmap buffers

Arnaldo Carvalho de Melo (21):
perf powerpc: Add missing headers to skip-callchain-idx.c
perf arm pmu: Add missing linux/string.h header
perf srccode: Move struct definition from map.h to srccode.h perf callchain: Uninline callchain_cursor_reset() to remove map.h dependency perf symbols: Introduce map_symbol.h
pref tools: Add missing map.h includes
perf map: Move structs and prototypes for map groups to a separate header perf tests: Add missing headers so far obtained indirectly
perf hist: Remove symbol.h from hist.h, just fwd decls are needed perf tools: Add missing include for symbols.h
perf evsel: No need to include symbol.h in evsel.h, symbol_conf.h is enough perf thread: Don't include symbol.h, symbol_conf.h is enough perf tools: Add missing include <callchain.h> in various places perf hist: Remove the needless callchain.h include from hist.h perf tests pmu: Add missing headers
perf pmu: Remove needless evsel.h include, only needs one fwd decl perf kvm stat: Replace kvm-stat.h includes with forward declarations perf powerpc kvm-stat: Add missing evlist.h header
perf bpf-loader: Remove unecessary includes from bpf-loader.h perf tools: Add fallback versions for CPU_{OR,EQUAL}()
perf clang: Do not use 'return std::move(something)'

Changbin Du (1):
perf tools: Add documentation for BPF event selection

Jiri Olsa (3):
perf hists: Add argument to hists__resort_cb_t callback perf evsel: Add output_resort_cb method
perf report: Move symbol annotation to the resort phase

Leo Yan (8):
perf cs-etm: Add last instruction information in packet perf cs-etm: Set sample flags for instruction range packet perf cs-etm: Set sample flags for trace discontinuity perf cs-etm: Add exception number in exception packet perf cs-etm: Change tuple from traceID-CPU# to traceID-metadata perf cs-etm: Add traceID in packet
perf cs-etm: Set sample flags for exception packet perf cs-etm: Set sample flags for exception return packet

Mathieu Poirier (7):
perf/aux: Make perf_event accessible to setup_aux()
coresight: perf: Add "sinks" group to PMU directory
coresight: Use event attributes for sink selection
perf pmu: Move EVENT_SOURCE_DEVICE_PATH to PMU header file perf arm cs-etm: Use event attributes to send sink information to kernel perf coresight: Remove set_drv_config() API
perf pmu: Remove set_drv_config API

William Cohen (1):
perf vendor events intel: Fix Load_Miss_Real_Latency on CLX

 arch/s390/kernel/perf_cpum_sf.c                    |   6 +-
 arch/x86/events/intel/bts.c                        |   4 +-
 arch/x86/events/intel/pt.c                         |   5 +-
 drivers/hwtracing/coresight/coresight-etm-perf.c   | 112 +++++-
 drivers/hwtracing/coresight/coresight-etm-perf.h   |   6 +-
 drivers/hwtracing/coresight/coresight-priv.h       |   1 +
 drivers/hwtracing/coresight/coresight.c            |  60 ++++
 drivers/perf/arm_spe_pmu.c                         |   6 +-
 include/linux/coresight.h                          |   7 +-
 include/linux/perf_event.h                         |   2 +-
 kernel/events/ring_buffer.c                        |   2 +-
 tools/perf/Documentation/perf-config.txt           |  31 ++
 tools/perf/Documentation/perf-record.txt           |  14 +
 tools/perf/arch/arm/tests/dwarf-unwind.c           |   1 +
 tools/perf/arch/arm/util/cs-etm.c                  |  98 +++--
 tools/perf/arch/arm/util/cs-etm.h                  |   3 -
 tools/perf/arch/arm/util/pmu.c                     |   3 +-
 tools/perf/arch/arm64/tests/dwarf-unwind.c         |   1 +
 tools/perf/arch/powerpc/tests/dwarf-unwind.c       |   1 +
 tools/perf/arch/powerpc/util/kvm-stat.c            |   2 +
 tools/perf/arch/powerpc/util/skip-callchain-idx.c  |   3 +
 tools/perf/arch/s390/util/kvm-stat.c               |   1 +
 tools/perf/arch/x86/tests/dwarf-unwind.c           |   1 +
 tools/perf/arch/x86/util/kvm-stat.c                |   1 +
 tools/perf/builtin-annotate.c                      |   1 +
 tools/perf/builtin-c2c.c                           |   9 +-
 tools/perf/builtin-inject.c                        |   2 +
 tools/perf/builtin-kallsyms.c                      |   1 +
 tools/perf/builtin-kmem.c                          |   1 +
 tools/perf/builtin-mem.c                           |   1 +
 tools/perf/builtin-record.c                        |  38 +-
 tools/perf/builtin-report.c                        |  22 +-
 tools/perf/builtin-script.c                        |   1 +
 tools/perf/builtin-stat.c                          |   9 -
 tools/perf/builtin-top.c                           |  14 +-
 tools/perf/builtin-trace.c                         |   2 +
 tools/perf/perf.h                                  |   8 +
 .../arch/x86/cascadelakex/clx-metrics.json         |   2 +-
 tools/perf/scripts/python/export-to-postgresql.py  |   2 +-
 tools/perf/scripts/python/export-to-sqlite.py      |   2 +-
 tools/perf/tests/code-reading.c                    |   2 +
 tools/perf/tests/dwarf-unwind.c                    |   1 +
 tools/perf/tests/hists_common.c                    |   1 +
 tools/perf/tests/hists_cumulate.c                  |   1 +
 tools/perf/tests/hists_filter.c                    |   1 +
 tools/perf/tests/hists_output.c                    |   1 +
 tools/perf/tests/mmap-thread-lookup.c              |   1 +
 tools/perf/tests/pmu.c                             |   2 +
 tools/perf/tests/sample-parsing.c                  |   2 +
 tools/perf/tests/sdt.c                             |   1 +
 tools/perf/ui/browsers/annotate.c                  |   1 +
 tools/perf/ui/browsers/hists.c                     |   3 +
 tools/perf/ui/gtk/annotate.c                       |   2 +
 tools/perf/ui/gtk/hists.c                          |   1 +
 tools/perf/ui/hist.c                               |   1 +
 tools/perf/ui/stdio/hist.c                         |   4 +
 tools/perf/util/Build                              |   1 -
 tools/perf/util/annotate.c                         |   1 +
 tools/perf/util/auxtrace.c                         |  27 +-
 tools/perf/util/auxtrace.h                         |   5 +-
 tools/perf/util/bpf-loader.c                       |   1 +
 tools/perf/util/bpf-loader.h                       |   7 +-
 tools/perf/util/build-id.c                         |   1 +
 tools/perf/util/c++/clang.cpp                      |   2 +-
 tools/perf/util/callchain.c                        |  17 +
 tools/perf/util/callchain.h                        |  20 +-
 tools/perf/util/config.c                           |   1 +
 tools/perf/util/cpu-set-sched.h                    |  50 +++
 tools/perf/util/cpumap.c                           |  10 +
 tools/perf/util/cpumap.h                           |   1 +
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.c    |  41 ++-
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.h    |   6 +
 tools/perf/util/cs-etm.c                           | 394 ++++++++++++++++++++-
 tools/perf/util/cs-etm.h                           |  53 ++-
 tools/perf/util/db-export.c                        |   1 +
 tools/perf/util/drv_configs.c                      |  78 ----
 tools/perf/util/drv_configs.h                      |  26 --
 tools/perf/util/dso.c                              |   1 +
 tools/perf/util/event.c                            |   2 +
 tools/perf/util/event.h                            |   3 +-
 tools/perf/util/evlist.c                           |   6 +-
 tools/perf/util/evlist.h                           |   2 +-
 tools/perf/util/evsel.h                            |   2 +-
 tools/perf/util/hist.c                             |  21 +-
 tools/perf/util/hist.h                             |   9 +-
 tools/perf/util/intel-bts.c                        |   6 +-
 .../perf/util/intel-pt-decoder/intel-pt-decoder.c  |  39 +-
 tools/perf/util/intel-pt.c                         |  23 +-
 tools/perf/util/kvm-stat.h                         |   7 +-
 tools/perf/util/machine.c                          |   1 +
 tools/perf/util/machine.h                          |   2 +-
 tools/perf/util/map.c                              |   6 +
 tools/perf/util/map.h                              | 100 +-----
 tools/perf/util/map_groups.h                       |  91 +++++
 tools/perf/util/map_symbol.h                       |  22 ++
 tools/perf/util/mmap.c                             | 105 +++++-
 tools/perf/util/mmap.h                             |   3 +-
 tools/perf/util/pmu.c                              |   2 -
 tools/perf/util/pmu.h                              |   5 +-
 tools/perf/util/probe-event.c                      |   2 +
 tools/perf/util/s390-cpumsf.c                      |   7 +-
 .../perf/util/scripting-engines/trace-event-perl.c |   2 +
 .../util/scripting-engines/trace-event-python.c    |   2 +
 tools/perf/util/session.c                          |   5 +
 tools/perf/util/setup.py                           |   5 +
 tools/perf/util/sort.c                             |   8 +-
 tools/perf/util/sort.h                             |   3 +-
 tools/perf/util/srccode.h                          |  13 +
 tools/perf/util/symbol-elf.c                       |   2 +
 tools/perf/util/symbol.c                           |   3 +
 tools/perf/util/symbol.h                           |  14 +-
 tools/perf/util/thread-stack.c                     |  78 ++--
 tools/perf/util/thread-stack.h                     |   3 +
 tools/perf/util/thread.c                           |   1 +
 tools/perf/util/thread.h                           |   7 +-
 tools/perf/util/unwind-libdw.c                     |   2 +
 tools/perf/util/unwind-libunwind-local.c           |   1 +
 tools/perf/util/unwind-libunwind.c                 |   1 +
 tools/perf/util/vdso.c                             |   1 +
 119 files changed, 1399 insertions(+), 473 deletions(-)
 create mode 100644 tools/perf/util/cpu-set-sched.h
 delete mode 100644 tools/perf/util/drv_configs.c
 delete mode 100644 tools/perf/util/drv_configs.h
 create mode 100644 tools/perf/util/map_groups.h
 create mode 100644 tools/perf/util/map_symbol.h

Test results:

The first ones are container based builds of tools/perf with and without libelf support. Where clang is available, it is also used to build perf with/without libelf, and building with LIBCLANGLLVM=1 (built-in clang) with gcc and clang when clang and its devel libraries are installed.

The objtool and samples/bpf/ builds are disabled now that I'm switching from using the sources in a local volume to fetching them from a http server to build it inside the container, to make it easier to build in a container cluster. Those will come back later.

Several are cross builds, the ones with -x-ARCH and the android one, and those may not have all the features built, due to lack of multi-arch devel packages, available and being used so far on just a few, like debian:experimental-x-{arm64,mipsel}.

The 'perf test' one will perform a variety of tests exercising tools/perf/util/, tools/lib/{bpf,traceevent,etc}, as well as run perf commands with a variety of command line event specifications to then intercept the sys_perf_event syscall to check that the perf_event_attr fields are set up as expected, among a variety of other unit tests.

Then there is the 'make -C tools/perf build-test' ones, that build tools/perf/ with a variety of feature sets, exercising the build with an incomplete set of features as well as with a complete one. It is planned to have it run on each of the containers mentioned above, using some container orchestration infrastructure. Get in contact if interested in helping having this in place.

  # export PERF_TARBALL=http://192.168.124.1/perf/perf-5.0.0-rc5.tar.xz
  # time dm
   1 alpine:3.4                    : Ok   gcc (Alpine 5.3.0) 5.3.0
   2 alpine:3.5                    : Ok   gcc (Alpine 6.2.1) 6.2.1 20160822
   3 alpine:3.6                    : Ok   gcc (Alpine 6.3.0) 6.3.0
   4 alpine:3.7                    : Ok   gcc (Alpine 6.4.0) 6.4.0
   5 alpine:3.8                    : Ok   gcc (Alpine 6.4.0) 6.4.0
   6 alpine:3.9                    : Ok   gcc (Alpine 8.2.0) 8.2.0
   7 alpine:edge                   : Ok   gcc (Alpine 8.2.0) 8.2.0
   8 amazonlinux:1                 : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-28)
   9 amazonlinux:2                 : Ok   gcc (GCC) 7.3.1 20180303 (Red Hat 7.3.1-5)
  10 android-ndk:r12b-arm          : Ok   gcc (GCC) 8.2.1 20181215 (Red Hat 8.2.1-6)
  11 android-ndk:r15c-arm          : Ok   gcc (GCC) 8.2.1 20181215 (Red Hat 8.2.1-6)
  12 centos:5                      : Ok   gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-55)
  13 centos:6                      : Ok   gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-23)
  14 centos:7                      : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-36)
  15 clearlinux:latest             : Ok   gcc (Clear Linux OS for Intel Architecture) 8.2.1 20180502
  16 debian:7                      : Ok   gcc (Debian 4.7.2-5) 4.7.2
  17 debian:8                      : Ok   gcc (Debian 4.9.2-10+deb8u2) 4.9.2
  18 debian:9                      : Ok   gcc (Debian 6.3.0-18+deb9u1) 6.3.0 20170516
  19 debian:experimental           : Ok   gcc (Debian 8.2.0-16) 8.2.0
  20 debian:experimental-x-arm64   : Ok   gcc (Debian 8.2.0-16) 8.2.0
  21 debian:experimental-x-mips    : Ok   gcc (Debian 8.2.0-16) 8.2.0
  22 debian:experimental-x-mips64  : Ok   gcc (Debian 8.2.0-16) 8.2.0
  23 fedora:20                     : Ok   gcc (GCC) 4.8.3 20140911 (Red Hat 4.8.3-7)
  24 fedora:21                     : Ok   gcc (GCC) 4.9.2 20150212 (Red Hat 4.9.2-6)
  25 fedora:25                     : Ok   gcc (GCC) 6.4.1 20170727 (Red Hat 6.4.1-1)
  26 fedora:26                     : Ok   gcc (GCC) 7.3.1 20180130 (Red Hat 7.3.1-2)
  27 fedora:27                     : Ok   gcc (GCC) 7.3.1 20180712 (Red Hat 7.3.1-6)
  28 fedora:28                     : Ok   gcc (GCC) 8.2.1 20181215 (Red Hat 8.2.1-6)
  29 fedora:29                     : Ok   gcc (GCC) 8.2.1 20181215 (Red Hat 8.2.1-6)
  30 fedora:rawhide                : Ok   gcc (GCC) 9.0.0 20190119 (Red Hat 9.0.0-0.3)
  31 gentoo-stage3-amd64:latest    : Ok   gcc (Gentoo 7.3.0-r3 p1.4) 7.3.0
  32 mageia:5                      : Ok   gcc (GCC) 4.9.2
  33 mageia:6                      : Ok   gcc (Mageia 5.5.0-1.mga6) 5.5.0
  34 opensuse:13.2                 : Ok   gcc (SUSE Linux) 4.8.3 20140627 [gcc-4_8-branch revision 212064]
  35 opensuse:15.0                 : Ok   gcc (SUSE Linux) 7.3.1 20180323 [gcc-7-branch revision 258812]
  36 opensuse:15.1                 : Ok   gcc (SUSE Linux) 7.4.0
  37 opensuse:42.1                 : Ok   gcc (SUSE Linux) 4.8.5
  38 opensuse:42.2                 : Ok   gcc (SUSE Linux) 4.8.5
  39 opensuse:42.3                 : Ok   gcc (SUSE Linux) 4.8.5
  40 opensuse:tumbleweed           : Ok   gcc (SUSE Linux) 8.2.1 20190103 [gcc-8-branch revision 267549]
  42 oraclelinux:7                 : Ok   gcc (GCC) 4.8.5 20150623 (Red Hat 4.8.5-36.0.1)
  43 ubuntu:12.04.5                : Ok   gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
  44 ubuntu:14.04.4                : Ok   gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
  45 ubuntu:14.04.4-x-linaro-arm64 : Ok   gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4
  46 ubuntu:16.04                  : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
  47 ubuntu:16.04-x-arm            : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
  48 ubuntu:16.04-x-arm64          : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
  49 ubuntu:16.04-x-powerpc        : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
  50 ubuntu:16.04-x-powerpc64      : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
  51 ubuntu:16.04-x-powerpc64el    : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
  52 ubuntu:16.04-x-s390           : Ok   gcc (Ubuntu 5.4.0-6ubuntu1~16.04.11) 5.4.0 20160609
  53 ubuntu:17.10                  : Ok   gcc (Ubuntu 7.2.0-8ubuntu3.2) 7.2.0
  54 ubuntu:18.04                  : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  55 ubuntu:18.04-x-arm            : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  56 ubuntu:18.04-x-arm64          : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  57 ubuntu:18.04-x-m68k           : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  58 ubuntu:18.04-x-powerpc        : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  59 ubuntu:18.04-x-powerpc64      : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  60 ubuntu:18.04-x-powerpc64el    : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  61 ubuntu:18.04-x-riscv64        : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  62 ubuntu:18.04-x-s390           : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  63 ubuntu:18.04-x-sh4            : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  64 ubuntu:18.04-x-sparc64        : Ok   gcc (Ubuntu 7.3.0-27ubuntu1~18.04) 7.3.0
  65 ubuntu:18.10                  : Ok   gcc (Ubuntu 8.2.0-7ubuntu1) 8.2.0
  66 ubuntu:19.04                  : Ok   gcc (Ubuntu 8.2.0-15ubuntu1) 8.2.0
  67 ubuntu:19.04-x-alpha          : Ok   gcc (Ubuntu 8.2.0-15ubuntu1) 8.2.0
  68 ubuntu:19.04-x-hppa           : Ok   gcc (Ubuntu 8.2.0-15ubuntu1) 8.2.0

#

  # uname -a
  Linux quaco 5.0.0-rc3+ #16 SMP Mon Jan 21 12:01:36 -03 2019 x86_64 x86_64 x86_64 GNU/Linux
  # git log --oneline -1
  16bd4321c242 perf auxtrace: Add timestamp to auxtrace errors
  # perf version --build-options
  perf version 5.0.rc5.g16bd43
                   dwarf: [ on  ]  # HAVE_DWARF_SUPPORT
      dwarf_getlocations: [ on  ]  # HAVE_DWARF_GETLOCATIONS_SUPPORT
                   glibc: [ on  ]  # HAVE_GLIBC_SUPPORT
                    gtk2: [ on  ]  # HAVE_GTK2_SUPPORT
           syscall_table: [ on  ]  # HAVE_SYSCALL_TABLE_SUPPORT
                  libbfd: [ on  ]  # HAVE_LIBBFD_SUPPORT
                  libelf: [ on  ]  # HAVE_LIBELF_SUPPORT
                 libnuma: [ on  ]  # HAVE_LIBNUMA_SUPPORT
  numa_num_possible_cpus: [ on  ]  # HAVE_LIBNUMA_SUPPORT
                 libperl: [ on  ]  # HAVE_LIBPERL_SUPPORT
               libpython: [ on  ]  # HAVE_LIBPYTHON_SUPPORT
                libslang: [ on  ]  # HAVE_SLANG_SUPPORT
               libcrypto: [ on  ]  # HAVE_LIBCRYPTO_SUPPORT
               libunwind: [ on  ]  # HAVE_LIBUNWIND_SUPPORT
      libdw-dwarf-unwind: [ on  ]  # HAVE_DWARF_SUPPORT
                    zlib: [ on  ]  # HAVE_ZLIB_SUPPORT
                    lzma: [ on  ]  # HAVE_LZMA_SUPPORT
               get_cpuid: [ on  ]  # HAVE_AUXTRACE_SUPPORT
                     bpf: [ on  ]  # HAVE_LIBBPF_SUPPORT
  # perf test
   1: vmlinux symtab matches kallsyms                       : Ok
   2: Detect openat syscall event                           : Ok
   3: Detect openat syscall event on all cpus               : Ok
   4: Read samples using the mmap interface                 : Ok
   5: Test data source output                               : Ok
   6: Parse event definition strings                        : Ok
   7: Simple expression parser                              : Ok
   8: PERF_RECORD_* events & perf_sample fields             : Ok
   9: Parse perf pmu format                                 : Ok
  10: DSO data read                                         : Ok
  11: DSO data cache                                        : Ok
  12: DSO data reopen                                       : Ok
  13: Roundtrip evsel->name                                 : Ok
  14: Parse sched tracepoints fields                        : Ok
  15: syscalls:sys_enter_openat event fields                : Ok
  16: Setup struct perf_event_attr                          : Ok
  17: Match and link multiple hists                         : Ok
  18: 'import perf' in python                               : Ok
  19: Breakpoint overflow signal handler                    : Ok
  20: Breakpoint overflow sampling                          : Ok
  21: Breakpoint accounting                                 : Ok
  22: Watchpoint                                            :
  22.1: Read Only Watchpoint                                : Skip
  22.2: Write Only Watchpoint                               : Ok
  22.3: Read / Write Watchpoint                             : Ok
  22.4: Modify Watchpoint                                   : Ok
  23: Number of exit events of a simple workload            : Ok
  24: Software clock events period values                   : Ok
  25: Object code reading                                   : Ok
  26: Sample parsing                                        : Ok
  27: Use a dummy software event to keep tracking           : Ok
  28: Parse with no sample_id_all bit set                   : Ok
  29: Filter hist entries                                   : Ok
  30: Lookup mmap thread                                    : Ok
  31: Share thread mg                                       : Ok
  32: Sort output of hist entries                           : Ok
  33: Cumulate child hist entries                           : Ok
  34: Track with sched_switch                               : Ok
  35: Filter fds with revents mask in a fdarray             : Ok
  36: Add fd to a fdarray, making it autogrow               : Ok
  37: kmod_path__parse                                      : Ok
  38: Thread map                                            : Ok
  39: LLVM search and compile                               :
  39.1: Basic BPF llvm compile                              : Ok
  39.2: kbuild searching                                    : Ok
  39.3: Compile source for BPF prologue generation          : Ok
  39.4: Compile source for BPF relocation                   : Ok
  40: Session topology                                      : Ok
  41: BPF filter                                            :
  41.1: Basic BPF filtering                                 : Ok
  41.2: BPF pinning                                         : Ok
  41.3: BPF prologue generation                             : Ok
  41.4: BPF relocation checker                              : Ok
  42: Synthesize thread map                                 : Ok
  43: Remove thread map                                     : Ok
  44: Synthesize cpu map                                    : Ok
  45: Synthesize stat config                                : Ok
  46: Synthesize stat                                       : Ok
  47: Synthesize stat round                                 : Ok
  48: Synthesize attr update                                : Ok
  49: Event times                                           : Ok
  50: Read backward ring buffer                             : Ok
  51: Print cpu map                                         : Ok
  52: Probe SDT events                                      : Ok
  53: is_printable_array                                    : Ok
  54: Print bitmap                                          : Ok
  55: perf hooks                                            : Ok
  56: builtin clang support                                 : Skip (not compiled in)
  57: unit_number__scnprintf                                : Ok
  58: mem2node                                              : Ok
  59: x86 rdpmc                                             : Ok
  60: Convert perf time to TSC                              : Ok
  61: DWARF unwind                                          : Ok
  62: x86 instruction decoder - new instructions            : Ok
  63: x86 bp modify                                         : Ok
  64: probe libc's inet_pton & backtrace it with ping       : Ok
  65: Use vfs_getname probe to get syscall args filenames   : Ok
  66: Add vfs_getname probe to get syscall args filenames   : Ok
  67: Check open filename arg using perf trace + vfs_getname: Ok
  $ make -C tools/perf build-test
  make: Entering directory '/home/acme/git/perf/tools/perf'
  - tarpkg: ./tests/perf-targz-src-pkg .
                  make_no_ui_O: make NO_NEWT=1 NO_SLANG=1 NO_GTK2=1
           make_no_backtrace_O: make NO_BACKTRACE=1
            make_no_auxtrace_O: make NO_AUXTRACE=1
            make_no_demangle_O: make NO_DEMANGLE=1
                  make_debug_O: make DEBUG=1
                make_no_gtk2_O: make NO_GTK2=1
                   make_tags_O: make tags
              make_clean_all_O: make clean all
         make_install_prefix_O: make install prefix=/tmp/krava
             make_no_scripts_O: make NO_LIBPYTHON=1 NO_LIBPERL=1
       make_util_pmu_bison_o_O: make util/pmu-bison.o
   make_install_prefix_slash_O: make install prefix=/tmp/krava/
              make_no_libelf_O: make NO_LIBELF=1
                 make_cscope_O: make cscope
        make_with_babeltrace_O: make LIBBABELTRACE=1
                 make_perf_o_O: make perf.o
                   make_help_O: make help
               make_no_slang_O: make NO_SLANG=1
                   make_pure_O: make
                 make_static_O: make LDFLAGS=-static
              make_no_libbpf_O: make NO_LIBBPF=1
             make_no_libnuma_O: make NO_LIBNUMA=1
                    make_doc_O: make doc
                make_install_O: make install
           make_no_libpython_O: make NO_LIBPYTHON=1
             make_no_libperl_O: make NO_LIBPERL=1
            make_no_libaudit_O: make NO_LIBAUDIT=1
                make_no_newt_O: make NO_NEWT=1
  make_no_libdw_dwarf_unwind_O: make NO_LIBDW_DWARF_UNWIND=1
           make_no_libunwind_O: make NO_LIBUNWIND=1
         make_with_clangllvm_O: make LIBCLANGLLVM=1
             make_util_map_o_O: make util/map.o
            make_install_bin_O: make install-bin
           make_no_libbionic_O: make NO_LIBBIONIC=1
                make_minimal_O: make NO_LIBPERL=1 NO_LIBPYTHON=1 NO_NEWT=1 NO_GTK2=1 NO_DEMANGLE=1 NO_LIBELF=1 NO_LIBUNWIND=1 NO_BACKTRACE=1 NO_LIBNUMA=1 NO_LIBAUDIT=1 NO_LIBBIONIC=1 NO_LIBDW_DWARF_UNWIND=1 NO_AUXTRACE=1 NO_LIBBPF=1 NO_LIBCRYPTO=1 NO_SDT=1 NO_JVMTI=1
  OK
  $
author maintainer
#1 lore raw

PATCH 1/53 perf powerpc: Add missing headers to skip-callchain-idx.c

From: Arnaldo Carvalho de Melo <[email protected]>

It uses several structs but don't explicitely includes the headers where they are defined, getting them by sheer luck from one of the headers it includes, since those are being streamlined to avoid unnecessary rebuilds when changes are made to a random header, they will break, fix them now so that they continue to build.

Cc Adrian Hunter <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Maynard Johnson <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Naveen N. Rao <[email protected]>
Cc Ravi Bangoria <[email protected]>
Cc Sandipan Das <[email protected]>
Cc Sukadev Bhattiprolu <[email protected]>
---
 tools/perf/arch/powerpc/util/skip-callchain-idx.c | 3 +++
 1 file changed, 3 insertions(+)
tools/perf/arch/powerpc/util/skip-callchain-idx.c +3 -0
index 7c6eeb4633fe..2918bb16c892 100644
@@ -16,6 +16,9 @@
 #include "util/thread.h"
 #include "util/callchain.h"
 #include "util/debug.h"
+#include "util/dso.h"
+#include "util/map.h"
+#include "util/symbol.h"
 
 /*
  * When saving the callchain on Power, the kernel conservatively saves
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 2/53 perf arm pmu: Add missing linux/string.h header

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

It uses strstarts(), that is defined in linux/string.h but that was being including by sheer luck, indirectly, fix it.

Cc Adrian Hunter <[email protected]>
Cc Dongjiu Geng <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Kim Phillips <[email protected]>
Cc Mathieu Poirier <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Suzuki Poulouse <[email protected]>
Cc Will Deacon <[email protected]>
---
 tools/perf/arch/arm/util/pmu.c | 1 +
 1 file changed, 1 insertion(+)
tools/perf/arch/arm/util/pmu.c +1 -0
index e047571e6080..64a677b518d0 100644
@@ -7,6 +7,7 @@
 #include <string.h>
 #include <linux/coresight-pmu.h>
 #include <linux/perf_event.h>
+#include <linux/string.h>
 
 #include "cs-etm.h"
 #include "arm-spe.h"
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 3/53 perf srccode: Move struct definition from map.h to srccode.h

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

To reduce the header dependencies, since we already have a srccode.h header, then there is where the 'struct srccode_state' should be, and map.h, that is more widely used should have just a forward declaraion of 'struct srccode_state'.

---
 tools/perf/util/map.h     | 13 +------------
 tools/perf/util/srccode.h | 13 +++++++++++++
 tools/perf/util/thread.h  |  2 +-
 3 files changed, 15 insertions(+), 13 deletions(-)
tools/perf/util/map.h +1 -12
index 09282aa45c80..5a889db4fca5 100644
@@ -174,18 +174,7 @@ char *map__srcline(struct map *map, u64 addr, struct symbol *sym);
 int map__fprintf_srcline(struct map *map, u64 addr, const char *prefix,
 			 FILE *fp);
 
-struct srccode_state {
-	char *srcfile;
-	unsigned line;
-};
-
-static inline void srccode_state_init(struct srccode_state *state)
-{
-	state->srcfile = NULL;
-	state->line = 0;
-}
-
-void srccode_state_free(struct srccode_state *state);
+struct srccode_state;
 
 int map__fprintf_srccode(struct map *map, u64 addr,
 			 FILE *fp, struct srccode_state *state);
tools/perf/util/srccode.h +13 -0
index e500a746d5f1..1b5ed769779c 100644
@@ -1,6 +1,19 @@
 #ifndef SRCCODE_H
 #define SRCCODE_H 1
 
+struct srccode_state {
+	char	 *srcfile;
+	unsigned line;
+};
+
+static inline void srccode_state_init(struct srccode_state *state)
+{
+	state->srcfile = NULL;
+	state->line    = 0;
+}
+
+void srccode_state_free(struct srccode_state *state);
+
 /* Result is not 0 terminated */
 char *find_sourceline(char *fn, unsigned line, int *lenp);
 
tools/perf/util/thread.h +1 -1
index f3c939150f90..856cf1a9040a 100644
@@ -7,8 +7,8 @@
 #include <linux/list.h>
 #include <unistd.h>
 #include <sys/types.h>
+#include "srccode.h"
 #include "symbol.h"
-#include "map.h"
 #include <strlist.h>
 #include <intlist.h>
 #include "rwsem.h"
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 4/53 perf callchain: Uninline callchain_cursor_reset() to remove map.h dependency

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

That was the only thing that made including map.h in callchain.h a requiriment, so uninline it and just add a 'struct map' forward declaration.

---
 tools/perf/ui/gtk/annotate.c |  1 +
 tools/perf/ui/stdio/hist.c   |  1 +
 tools/perf/util/callchain.c  | 15 +++++++++++++++
 tools/perf/util/callchain.h  | 18 +++---------------
 4 files changed, 20 insertions(+), 15 deletions(-)
tools/perf/ui/gtk/annotate.c +1 -0
index f22a7d142ada..f42666ee0672 100644
@@ -4,6 +4,7 @@
 #include "util/debug.h"
 #include "util/annotate.h"
 #include "util/evsel.h"
+#include "util/map.h"
 #include "ui/helpline.h"
 #include <inttypes.h>
 #include <signal.h>
tools/perf/ui/stdio/hist.c +1 -0
index 2a9fa4dcbc2a..814abf5e9a5c 100644
@@ -4,6 +4,7 @@
 
 #include "../../util/util.h"
 #include "../../util/hist.h"
+#include "../../util/map.h"
 #include "../../util/sort.h"
 #include "../../util/evsel.h"
 #include "../../util/srcline.h"
tools/perf/util/callchain.c +15 -0
index dc2212e12184..2974950039ac 100644
@@ -1577,3 +1577,18 @@ int callchain_cursor__copy(struct callchain_cursor *dst,
 
 	return rc;
 }
+
+/*
+ * Initialize a cursor before adding entries inside, but keep
+ * the previously allocated entries as a cache.
+ */
+void callchain_cursor_reset(struct callchain_cursor *cursor)
+{
+	struct callchain_cursor_node *node;
+
+	cursor->nr = 0;
+	cursor->last = &cursor->first;
+
+	for (node = cursor->first; node != NULL; node = node->next)
+		map__zput(node->map);
+}
tools/perf/util/callchain.h +3 -15
index 8afe1622edf3..b6f18c2d4b14 100644
@@ -5,10 +5,11 @@
 #include <linux/list.h>
 #include <linux/rbtree.h>
 #include "event.h"
-#include "map.h"
 #include "symbol.h"
 #include "branch.h"
 
+struct map;
+
 #define HELP_PAD "\t\t\t\t"
 
 #define CALLCHAIN_HELP "setup and enables call-graph (stack chain/backtrace):\n\n"
@@ -187,20 +188,7 @@ int callchain_append(struct callchain_root *root,
 int callchain_merge(struct callchain_cursor *cursor,
 		    struct callchain_root *dst, struct callchain_root *src);
 
-/*
- * Initialize a cursor before adding entries inside, but keep
- * the previously allocated entries as a cache.
- */
-static inline void callchain_cursor_reset(struct callchain_cursor *cursor)
-{
-	struct callchain_cursor_node *node;
-
-	cursor->nr = 0;
-	cursor->last = &cursor->first;
-
-	for (node = cursor->first; node != NULL; node = node->next)
-		map__zput(node->map);
-}
+void callchain_cursor_reset(struct callchain_cursor *cursor);
 
 int callchain_cursor_append(struct callchain_cursor *cursor, u64 ip,
 			    struct map *map, struct symbol *sym,
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 5/53 perf symbols: Introduce map_symbol.h

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

To allow headers just wanting this definition to be able to get it without all the things in symbol.h, to reduce the include dep tree.

---
 tools/perf/util/callchain.h  |  2 +-
 tools/perf/util/hist.h       |  1 +
 tools/perf/util/map_symbol.h | 22 ++++++++++++++++++++++
 tools/perf/util/sort.h       |  3 ++-
 tools/perf/util/symbol.h     | 14 +-------------
 5 files changed, 27 insertions(+), 15 deletions(-)
 create mode 100644 tools/perf/util/map_symbol.h
tools/perf/util/callchain.h +1 -1
index b6f18c2d4b14..80e056a3d882 100644
@@ -5,7 +5,7 @@
 #include <linux/list.h>
 #include <linux/rbtree.h>
 #include "event.h"
-#include "symbol.h"
+#include "map_symbol.h"
 #include "branch.h"
 
 struct map;
tools/perf/util/hist.h +1 -0
index 08267af7439c..f50aad24928e 100644
@@ -8,6 +8,7 @@
 #include "evsel.h"
 #include "header.h"
 #include "color.h"
+#include "symbol.h"
 #include "ui/progress.h"
 
 struct hist_entry;
tools/perf/util/map_symbol.h new file +22 -0
new file mode 100644
index 000000000000..5a1aed9f6bb4
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+#ifndef __PERF_MAP_SYMBOL
+#define __PERF_MAP_SYMBOL 1
+
+#include <linux/types.h>
+
+struct map;
+struct symbol;
+
+struct map_symbol {
+	struct map    *map;
+	struct symbol *sym;
+};
+
+struct addr_map_symbol {
+	struct map    *map;
+	struct symbol *sym;
+	u64	      addr;
+	u64	      al_addr;
+	u64	      phys_addr;
+};
+#endif // __PERF_MAP_SYMBOL
tools/perf/util/sort.h +2 -1
index dd6312876492..2fbee0b1011c 100644
@@ -9,7 +9,8 @@
 #include <linux/list.h>
 #include "cache.h"
 #include <linux/rbtree.h>
-#include "symbol.h"
+#include "map_symbol.h"
+#include "symbol_conf.h"
 #include "string.h"
 #include "callchain.h"
 #include "values.h"
tools/perf/util/symbol.h +1 -13
index 56e2bcb907cc..9a8fe012910a 100644
@@ -8,6 +8,7 @@
 #include <linux/list.h>
 #include <linux/rbtree.h>
 #include <stdio.h>
+#include "map_symbol.h"
 #include "branch.h"
 #include "path.h"
 #include "symbol_conf.h"
@@ -115,19 +116,6 @@ struct ref_reloc_sym {
 	u64		unrelocated_addr;
 };
 
-struct map_symbol {
-	struct map    *map;
-	struct symbol *sym;
-};
-
-struct addr_map_symbol {
-	struct map    *map;
-	struct symbol *sym;
-	u64	      addr;
-	u64	      al_addr;
-	u64	      phys_addr;
-};
-
 struct branch_info {
 	struct addr_map_symbol from;
 	struct addr_map_symbol to;
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 6/53 pref tools: Add missing map.h includes

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Lots of places get the map.h file indirectly, and since we're going to remove it from machine.h, then those need to include it directly, do it now, before we remove that dep.

---
 tools/perf/builtin-annotate.c                          | 1 +
 tools/perf/builtin-inject.c                            | 1 +
 tools/perf/builtin-kallsyms.c                          | 1 +
 tools/perf/builtin-kmem.c                              | 1 +
 tools/perf/builtin-mem.c                               | 1 +
 tools/perf/builtin-report.c                            | 1 +
 tools/perf/builtin-script.c                            | 1 +
 tools/perf/builtin-top.c                               | 1 +
 tools/perf/builtin-trace.c                             | 1 +
 tools/perf/tests/code-reading.c                        | 1 +
 tools/perf/tests/hists_common.c                        | 1 +
 tools/perf/tests/hists_cumulate.c                      | 1 +
 tools/perf/tests/hists_filter.c                        | 1 +
 tools/perf/tests/hists_output.c                        | 1 +
 tools/perf/tests/mmap-thread-lookup.c                  | 1 +
 tools/perf/ui/browsers/annotate.c                      | 1 +
 tools/perf/ui/browsers/hists.c                         | 1 +
 tools/perf/util/annotate.c                             | 1 +
 tools/perf/util/build-id.c                             | 1 +
 tools/perf/util/callchain.c                            | 1 +
 tools/perf/util/db-export.c                            | 1 +
 tools/perf/util/dso.c                                  | 1 +
 tools/perf/util/event.c                                | 1 +
 tools/perf/util/intel-bts.c                            | 1 +
 tools/perf/util/probe-event.c                          | 1 +
 tools/perf/util/scripting-engines/trace-event-perl.c   | 1 +
 tools/perf/util/scripting-engines/trace-event-python.c | 1 +
 tools/perf/util/session.c                              | 1 +
 tools/perf/util/sort.c                                 | 1 +
 tools/perf/util/symbol-elf.c                           | 1 +
 tools/perf/util/symbol.c                               | 1 +
 tools/perf/util/unwind-libdw.c                         | 1 +
 tools/perf/util/unwind-libunwind-local.c               | 1 +
 tools/perf/util/unwind-libunwind.c                     | 1 +
 tools/perf/util/vdso.c                                 | 1 +
 35 files changed, 35 insertions(+)
tools/perf/builtin-annotate.c +1 -0
index 20db635347e5..7f3c3fea67b4 100644
@@ -27,6 +27,7 @@
 #include "util/thread.h"
 #include "util/sort.h"
 #include "util/hist.h"
+#include "util/map.h"
 #include "util/session.h"
 #include "util/tool.h"
 #include "util/data.h"
tools/perf/builtin-inject.c +1 -0
index eda41673c4f3..3499addcfc12 100644
@@ -12,6 +12,7 @@
 #include "util/color.h"
 #include "util/evlist.h"
 #include "util/evsel.h"
+#include "util/map.h"
 #include "util/session.h"
 #include "util/tool.h"
 #include "util/debug.h"
tools/perf/builtin-kallsyms.c +1 -0
index 90d1a2305b72..bc7a2bc7aed7 100644
@@ -13,6 +13,7 @@
 #include <subcmd/parse-options.h>
 #include "debug.h"
 #include "machine.h"
+#include "map.h"
 #include "symbol.h"
 
 static int __cmd_kallsyms(int argc, const char **argv)
tools/perf/builtin-kmem.c +1 -0
index 088705c167bf..b80ec0883537 100644
@@ -6,6 +6,7 @@
 #include "util/evsel.h"
 #include "util/util.h"
 #include "util/config.h"
+#include "util/map.h"
 #include "util/symbol.h"
 #include "util/thread.h"
 #include "util/header.h"
tools/perf/builtin-mem.c +1 -0
index 57393e94d156..ba7e8d87dec3 100644
@@ -13,6 +13,7 @@
 #include "util/data.h"
 #include "util/mem-events.h"
 #include "util/debug.h"
+#include "util/map.h"
 #include "util/symbol.h"
 
 #define MEM_OPERATION_LOAD	0x1
tools/perf/builtin-report.c +1 -0
index c9ceaf88759c..a007ea9a3874 100644
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/rbtree.h>
 #include <linux/err.h>
+#include "util/map.h"
 #include "util/symbol.h"
 #include "util/callchain.h"
 #include "util/values.h"
tools/perf/builtin-script.c +1 -0
index ac221f137ed2..8d5fe092525c 100644
@@ -10,6 +10,7 @@
 #include "util/perf_regs.h"
 #include "util/session.h"
 #include "util/tool.h"
+#include "util/map.h"
 #include "util/symbol.h"
 #include "util/thread.h"
 #include "util/trace-event.h"
tools/perf/builtin-top.c +1 -0
index 57b1d7495d02..619406339e4b 100644
@@ -30,6 +30,7 @@
 #include "util/evsel.h"
 #include "util/event.h"
 #include "util/machine.h"
+#include "util/map.h"
 #include "util/session.h"
 #include "util/symbol.h"
 #include "util/thread.h"
tools/perf/builtin-trace.c +1 -0
index 1447993e1ee3..c0b91595d6e3 100644
@@ -29,6 +29,7 @@
 #include "util/evlist.h"
 #include <subcmd/exec-cmd.h>
 #include "util/machine.h"
+#include "util/map.h"
 #include "util/path.h"
 #include "util/session.h"
 #include "util/thread.h"
tools/perf/tests/code-reading.c +1 -0
index dbf2c69944d2..59d00b3d0a74 100644
@@ -15,6 +15,7 @@
 #include "thread_map.h"
 #include "cpumap.h"
 #include "machine.h"
+#include "map.h"
 #include "event.h"
 #include "thread.h"
 
tools/perf/tests/hists_common.c +1 -0
index 6b0649c8b33e..469958cd7fe0 100644
@@ -2,6 +2,7 @@
 #include <inttypes.h>
 #include "perf.h"
 #include "util/debug.h"
+#include "util/map.h"
 #include "util/symbol.h"
 #include "util/sort.h"
 #include "util/evsel.h"
tools/perf/tests/hists_cumulate.c +1 -0
index 4ca417d1a06b..7a2eed6c783e 100644
@@ -2,6 +2,7 @@
 #include "perf.h"
 #include "util/debug.h"
 #include "util/event.h"
+#include "util/map.h"
 #include "util/symbol.h"
 #include "util/sort.h"
 #include "util/evsel.h"
tools/perf/tests/hists_filter.c +1 -0
index 1c5bedab3c2c..975844807fe2 100644
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "perf.h"
 #include "util/debug.h"
+#include "util/map.h"
 #include "util/symbol.h"
 #include "util/sort.h"
 #include "util/evsel.h"
tools/perf/tests/hists_output.c +1 -0
index 6c4bc68a77ee..0a510c524a5d 100644
@@ -2,6 +2,7 @@
 #include "perf.h"
 #include "util/debug.h"
 #include "util/event.h"
+#include "util/map.h"
 #include "util/symbol.h"
 #include "util/sort.h"
 #include "util/evsel.h"
tools/perf/tests/mmap-thread-lookup.c +1 -0
index 5ede9b561d32..ba87e6e8d18c 100644
@@ -11,6 +11,7 @@
 #include "tests.h"
 #include "machine.h"
 #include "thread_map.h"
+#include "map.h"
 #include "symbol.h"
 #include "thread.h"
 #include "util.h"
tools/perf/ui/browsers/annotate.c +1 -0
index 82e16bf84466..35bdfd8b1e71 100644
@@ -7,6 +7,7 @@
 #include "../../util/annotate.h"
 #include "../../util/hist.h"
 #include "../../util/sort.h"
+#include "../../util/map.h"
 #include "../../util/symbol.h"
 #include "../../util/evsel.h"
 #include "../../util/evlist.h"
tools/perf/ui/browsers/hists.c +1 -0
index 85790a4d1842..8ada0c690771 100644
@@ -11,6 +11,7 @@
 #include "../../util/evsel.h"
 #include "../../util/evlist.h"
 #include "../../util/hist.h"
+#include "../../util/map.h"
 #include "../../util/pstack.h"
 #include "../../util/sort.h"
 #include "../../util/util.h"
tools/perf/util/annotate.c +1 -0
index 3d79add5f7ae..2468b8aa0b6b 100644
@@ -17,6 +17,7 @@
 #include "color.h"
 #include "config.h"
 #include "cache.h"
+#include "map.h"
 #include "symbol.h"
 #include "units.h"
 #include "debug.h"
tools/perf/util/build-id.c +1 -0
index 2ff802068f06..bff0d17920ed 100644
@@ -16,6 +16,7 @@
 #include "build-id.h"
 #include "event.h"
 #include "namespaces.h"
+#include "map.h"
 #include "symbol.h"
 #include "thread.h"
 #include <linux/kernel.h>
tools/perf/util/callchain.c +1 -0
index 2974950039ac..cc47dba973f2 100644
@@ -23,6 +23,7 @@
 #include "util.h"
 #include "sort.h"
 #include "machine.h"
+#include "map.h"
 #include "callchain.h"
 #include "branch.h"
 
tools/perf/util/db-export.c +1 -0
index 69fbb0a72d0c..de9b4769d06c 100644
@@ -20,6 +20,7 @@
 #include "thread.h"
 #include "comm.h"
 #include "symbol.h"
+#include "map.h"
 #include "event.h"
 #include "util.h"
 #include "thread-stack.h"
tools/perf/util/dso.c +1 -0
index a8a54115b115..ba58ba603b69 100644
@@ -12,6 +12,7 @@
 #include "compress.h"
 #include "namespaces.h"
 #include "path.h"
+#include "map.h"
 #include "symbol.h"
 #include "srcline.h"
 #include "dso.h"
tools/perf/util/event.c +1 -0
index 1b5091a3d14f..4d84e7754be9 100644
@@ -21,6 +21,7 @@
 #include "thread.h"
 #include "thread_map.h"
 #include "sane_ctype.h"
+#include "map.h"
 #include "symbol/kallsyms.h"
 #include "asm/bug.h"
 #include "stat.h"
tools/perf/util/intel-bts.c +1 -0
index ee6ca65f81f4..f7fe8ccf6d65 100644
@@ -27,6 +27,7 @@
 #include "evsel.h"
 #include "evlist.h"
 #include "machine.h"
+#include "map.h"
 #include "session.h"
 #include "util.h"
 #include "thread.h"
tools/perf/util/probe-event.c +1 -0
index 4008f0cc36e5..b0192160513d 100644
@@ -41,6 +41,7 @@
 #include "debug.h"
 #include "cache.h"
 #include "color.h"
+#include "map.h"
 #include "symbol.h"
 #include "thread.h"
 #include <api/fs/fs.h>
tools/perf/util/scripting-engines/trace-event-perl.c +1 -0
index b93f36b887b5..a9f22694eed1 100644
@@ -37,6 +37,7 @@
 #include "../../perf.h"
 #include "../callchain.h"
 #include "../machine.h"
+#include "../map.h"
 #include "../thread.h"
 #include "../event.h"
 #include "../trace-event.h"
tools/perf/util/scripting-engines/trace-event-python.c +1 -0
index 7059d1be2d09..d9c83776a80f 100644
@@ -44,6 +44,7 @@
 #include "../thread-stack.h"
 #include "../trace-event.h"
 #include "../call-path.h"
+#include "map.h"
 #include "thread_map.h"
 #include "cpumap.h"
 #include "print_binary.h"
tools/perf/util/session.c +1 -0
index 24fd62528a33..e9755a649993 100644
@@ -13,6 +13,7 @@
 #include "evlist.h"
 #include "evsel.h"
 #include "memswap.h"
+#include "map.h"
 #include "session.h"
 #include "tool.h"
 #include "sort.h"
tools/perf/util/sort.c +1 -0
index 6c1a83768eb0..79e794406bef 100644
@@ -6,6 +6,7 @@
 #include "sort.h"
 #include "hist.h"
 #include "comm.h"
+#include "map.h"
 #include "symbol.h"
 #include "thread.h"
 #include "evsel.h"
tools/perf/util/symbol-elf.c +1 -0
index 66a84d5846c8..848d1a0f8dc0 100644
@@ -6,6 +6,7 @@
 #include <unistd.h>
 #include <inttypes.h>
 
+#include "map.h"
 #include "symbol.h"
 #include "demangle-java.h"
 #include "demangle-rust.h"
tools/perf/util/symbol.c +1 -0
index bcbcbd610460..7b194cf53cc0 100644
@@ -17,6 +17,7 @@
 #include "util.h"
 #include "debug.h"
 #include "machine.h"
+#include "map.h"
 #include "symbol.h"
 #include "strlist.h"
 #include "intlist.h"
tools/perf/util/unwind-libdw.c +1 -0
index 5eff9bfc5758..8ea7c89e73fd 100644
@@ -8,6 +8,7 @@
 #include "unwind.h"
 #include "unwind-libdw.h"
 #include "machine.h"
+#include "map.h"
 #include "thread.h"
 #include <linux/types.h>
 #include "event.h"
tools/perf/util/unwind-libunwind-local.c +1 -0
index 79f521a552cf..f3c666a84e4d 100644
@@ -34,6 +34,7 @@
 #include "session.h"
 #include "perf_regs.h"
 #include "unwind.h"
+#include "map.h"
 #include "symbol.h"
 #include "util.h"
 #include "debug.h"
tools/perf/util/unwind-libunwind.c +1 -0
index b029a5e9ae49..9778b3133b77 100644
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "unwind.h"
+#include "map.h"
 #include "thread.h"
 #include "session.h"
 #include "debug.h"
tools/perf/util/vdso.c +1 -0
index 3702cba11d7d..5031b7b22bbd 100644
@@ -11,6 +11,7 @@
 
 #include "vdso.h"
 #include "util.h"
+#include "map.h"
 #include "symbol.h"
 #include "machine.h"
 #include "thread.h"
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 7/53 perf map: Move structs and prototypes for map groups to a separate header

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

And since machine.h only needs what is in there, make it stop including map.h and instead include this newly introduced map_groups.h instead.

---
 tools/perf/arch/arm/tests/dwarf-unwind.c     |  1 +
 tools/perf/arch/arm64/tests/dwarf-unwind.c   |  1 +
 tools/perf/arch/powerpc/tests/dwarf-unwind.c |  1 +
 tools/perf/arch/x86/tests/dwarf-unwind.c     |  1 +
 tools/perf/ui/stdio/hist.c                   |  1 +
 tools/perf/util/machine.h                    |  2 +-
 tools/perf/util/map.c                        |  6 ++
 tools/perf/util/map.h                        | 87 +------------------
 tools/perf/util/map_groups.h                 | 91 ++++++++++++++++++++
 tools/perf/util/probe-event.c                |  1 +
 tools/perf/util/symbol-elf.c                 |  1 +
 11 files changed, 106 insertions(+), 87 deletions(-)
 create mode 100644 tools/perf/util/map_groups.h
tools/perf/arch/arm/tests/dwarf-unwind.c +1 -0
index 9a0242e74cfc..2c35e532bc9a 100644
@@ -3,6 +3,7 @@
 #include "perf_regs.h"
 #include "thread.h"
 #include "map.h"
+#include "map_groups.h"
 #include "event.h"
 #include "debug.h"
 #include "tests/tests.h"
tools/perf/arch/arm64/tests/dwarf-unwind.c +1 -0
index 5522ce384723..a6a407fa1b8b 100644
@@ -3,6 +3,7 @@
 #include "perf_regs.h"
 #include "thread.h"
 #include "map.h"
+#include "map_groups.h"
 #include "event.h"
 #include "debug.h"
 #include "tests/tests.h"
tools/perf/arch/powerpc/tests/dwarf-unwind.c +1 -0
index 5f39efef0856..5c178e4a1995 100644
@@ -3,6 +3,7 @@
 #include "perf_regs.h"
 #include "thread.h"
 #include "map.h"
+#include "map_groups.h"
 #include "event.h"
 #include "debug.h"
 #include "tests/tests.h"
tools/perf/arch/x86/tests/dwarf-unwind.c +1 -0
index 7879df34569a..6ad0a1cedb13 100644
@@ -3,6 +3,7 @@
 #include "perf_regs.h"
 #include "thread.h"
 #include "map.h"
+#include "map_groups.h"
 #include "event.h"
 #include "debug.h"
 #include "tests/tests.h"
tools/perf/ui/stdio/hist.c +1 -0
index 814abf5e9a5c..bb653a47f47a 100644
@@ -5,6 +5,7 @@
 #include "../../util/util.h"
 #include "../../util/hist.h"
 #include "../../util/map.h"
+#include "../../util/map_groups.h"
 #include "../../util/sort.h"
 #include "../../util/evsel.h"
 #include "../../util/srcline.h"
tools/perf/util/machine.h +1 -1
index e2f3df45410a..f70ab98a7bde 100644
@@ -4,7 +4,7 @@
 
 #include <sys/types.h>
 #include <linux/rbtree.h>
-#include "map.h"
+#include "map_groups.h"
 #include "dso.h"
 #include "event.h"
 #include "rwsem.h"
tools/perf/util/map.c +6 -0
index cf407cc9d915..fbeb0c6efaa6 100644
@@ -557,6 +557,12 @@ void map_groups__init(struct map_groups *mg, struct machine *machine)
 	refcount_set(&mg->refcnt, 1);
 }
 
+void map_groups__insert(struct map_groups *mg, struct map *map)
+{
+	maps__insert(&mg->maps, map);
+	map->groups = mg;
+}
+
 static void __maps__purge(struct maps *maps)
 {
 	struct rb_root *root = &maps->entries;
tools/perf/util/map.h +1 -86

112 lines not on this page · raw message

tools/perf/util/map_groups.h new file +91 -0

91 lines not on this page · raw message

tools/perf/util/probe-event.c +1 -0
index b0192160513d..0030f9b9bf7e 100644
@@ -42,6 +42,7 @@
 #include "cache.h"
 #include "color.h"
 #include "map.h"
+#include "map_groups.h"
 #include "symbol.h"
 #include "thread.h"
 #include <api/fs/fs.h>
tools/perf/util/symbol-elf.c +1 -0
index 848d1a0f8dc0..6b9a2a70da29 100644
@@ -7,6 +7,7 @@
 #include <inttypes.h>
 
 #include "map.h"
+#include "map_groups.h"
 #include "symbol.h"
 #include "demangle-java.h"
 #include "demangle-rust.h"
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 8/53 perf tests: Add missing headers so far obtained indirectly

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

We're going to remove symbol.h from some places and this breaks some of the perf tests, fix it by adding the required includes.

---
 tools/perf/tests/sample-parsing.c | 2 ++
 tools/perf/tests/sdt.c            | 1 +
 2 files changed, 3 insertions(+)
tools/perf/tests/sample-parsing.c +2 -0
index 0e2d00d69e6e..236ce0d6c826 100644
@@ -1,9 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <stdbool.h>
 #include <inttypes.h>
+#include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 
+#include "branch.h"
 #include "util.h"
 #include "event.h"
 #include "evsel.h"
tools/perf/tests/sdt.c +1 -0
index 5059452d27dd..8bfaa630389c 100644
@@ -3,6 +3,7 @@
 #include <stdio.h>
 #include <sys/epoll.h>
 #include <util/evlist.h>
+#include <util/symbol.h>
 #include <linux/filter.h>
 #include "tests.h"
 #include "debug.h"
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 9/53 perf hist: Remove symbol.h from hist.h, just fwd decls are needed

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

To reduce the includes dependencies.

---
 tools/perf/ui/gtk/annotate.c | 1 +
 tools/perf/util/auxtrace.c   | 1 +
 tools/perf/util/callchain.c  | 1 +
 tools/perf/util/hist.h       | 3 ++-
 4 files changed, 5 insertions(+), 1 deletion(-)
tools/perf/ui/gtk/annotate.c +1 -0
index f42666ee0672..df49c9ba1785 100644
@@ -5,6 +5,7 @@
 #include "util/annotate.h"
 #include "util/evsel.h"
 #include "util/map.h"
+#include "util/symbol.h"
 #include "ui/helpline.h"
 #include <inttypes.h>
 #include <signal.h>
tools/perf/util/auxtrace.c +1 -0
index f69961c4a4f3..94a22cc8004c 100644
@@ -41,6 +41,7 @@
 #include "pmu.h"
 #include "evsel.h"
 #include "cpumap.h"
+#include "symbol.h"
 #include "thread_map.h"
 #include "asm/bug.h"
 #include "auxtrace.h"
tools/perf/util/callchain.c +1 -0
index cc47dba973f2..abb608b09269 100644
@@ -26,6 +26,7 @@
 #include "map.h"
 #include "callchain.h"
 #include "branch.h"
+#include "symbol.h"
 
 #define CALLCHAIN_PARAM_DEFAULT			\
 	.mode		= CHAIN_GRAPH_ABS,	\
tools/perf/util/hist.h +2 -1
index f50aad24928e..38a72eb81427 100644
@@ -8,12 +8,13 @@
 #include "evsel.h"
 #include "header.h"
 #include "color.h"
-#include "symbol.h"
 #include "ui/progress.h"
 
 struct hist_entry;
 struct hist_entry_ops;
 struct addr_location;
+struct mem_info;
+struct branch_info;
 struct symbol;
 
 enum hist_filter {
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 10/53 perf tools: Add missing include for symbols.h

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Several places were using definitions found in symbols.h but not including it, getting it by sheer luck from some other headers that now are in the process of removing that include because they don't need it or because simply having struct forward declarations is enough, fix it.

---
 tools/perf/builtin-c2c.c                               | 1 +
 tools/perf/builtin-inject.c                            | 1 +
 tools/perf/builtin-trace.c                             | 1 +
 tools/perf/tests/code-reading.c                        | 1 +
 tools/perf/tests/dwarf-unwind.c                        | 1 +
 tools/perf/ui/browsers/hists.c                         | 1 +
 tools/perf/ui/stdio/hist.c                             | 1 +
 tools/perf/util/event.c                                | 1 +
 tools/perf/util/hist.c                                 | 1 +
 tools/perf/util/intel-bts.c                            | 1 +
 tools/perf/util/machine.c                              | 1 +
 tools/perf/util/scripting-engines/trace-event-perl.c   | 1 +
 tools/perf/util/scripting-engines/trace-event-python.c | 1 +
 tools/perf/util/session.c                              | 1 +
 tools/perf/util/thread.c                               | 1 +
 tools/perf/util/unwind-libdw.c                         | 1 +
 16 files changed, 16 insertions(+)
tools/perf/builtin-c2c.c +1 -0
index 72ec0ae7d8ad..b2bf117881f1 100644
@@ -33,6 +33,7 @@
 #include "ui/browsers/hists.h"
 #include "thread.h"
 #include "mem2node.h"
+#include "symbol.h"
 
 struct c2c_hists {
 	struct hists		hists;
tools/perf/builtin-inject.c +1 -0
index 3499addcfc12..9bb1f35d5cb7 100644
@@ -20,6 +20,7 @@
 #include "util/data.h"
 #include "util/auxtrace.h"
 #include "util/jit.h"
+#include "util/symbol.h"
 #include "util/thread.h"
 
 #include <subcmd/parse-options.h>
tools/perf/builtin-trace.c +1 -0
index c0b91595d6e3..81a44954d435 100644
@@ -30,6 +30,7 @@
 #include <subcmd/exec-cmd.h>
 #include "util/machine.h"
 #include "util/map.h"
+#include "util/symbol.h"
 #include "util/path.h"
 #include "util/session.h"
 #include "util/thread.h"
tools/perf/tests/code-reading.c +1 -0
index 59d00b3d0a74..4ebd2681e760 100644
@@ -16,6 +16,7 @@
 #include "cpumap.h"
 #include "machine.h"
 #include "map.h"
+#include "symbol.h"
 #include "event.h"
 #include "thread.h"
 
tools/perf/tests/dwarf-unwind.c +1 -0
index 7c8d2e422401..077c306c1cae 100644
@@ -10,6 +10,7 @@
 #include "../util/unwind.h"
 #include "perf_regs.h"
 #include "map.h"
+#include "symbol.h"
 #include "thread.h"
 #include "callchain.h"
 
tools/perf/ui/browsers/hists.c +1 -0
index 8ada0c690771..ac176b48178c 100644
@@ -12,6 +12,7 @@
 #include "../../util/evlist.h"
 #include "../../util/hist.h"
 #include "../../util/map.h"
+#include "../../util/symbol.h"
 #include "../../util/pstack.h"
 #include "../../util/sort.h"
 #include "../../util/util.h"
tools/perf/ui/stdio/hist.c +1 -0
index bb653a47f47a..f25116f70878 100644
@@ -6,6 +6,7 @@
 #include "../../util/hist.h"
 #include "../../util/map.h"
 #include "../../util/map_groups.h"
+#include "../../util/symbol.h"
 #include "../../util/sort.h"
 #include "../../util/evsel.h"
 #include "../../util/srcline.h"
tools/perf/util/event.c +1 -0
index 4d84e7754be9..ba7be74fad6e 100644
@@ -22,6 +22,7 @@
 #include "thread_map.h"
 #include "sane_ctype.h"
 #include "map.h"
+#include "symbol.h"
 #include "symbol/kallsyms.h"
 #include "asm/bug.h"
 #include "stat.h"
tools/perf/util/hist.c +1 -0
index 9e7a8e044a0a..3560ad2e5551 100644
@@ -11,6 +11,7 @@
 #include "evsel.h"
 #include "annotate.h"
 #include "srcline.h"
+#include "symbol.h"
 #include "thread.h"
 #include "ui/progress.h"
 #include <errno.h>
tools/perf/util/intel-bts.c +1 -0
index f7fe8ccf6d65..f99ac0cbe3ff 100644
@@ -28,6 +28,7 @@
 #include "evlist.h"
 #include "machine.h"
 #include "map.h"
+#include "symbol.h"
 #include "session.h"
 #include "util.h"
 #include "thread.h"
tools/perf/util/machine.c +1 -0
index 66f019fdc510..61959aba7e27 100644
@@ -10,6 +10,7 @@
 #include "hist.h"
 #include "machine.h"
 #include "map.h"
+#include "symbol.h"
 #include "sort.h"
 #include "strlist.h"
 #include "thread.h"
tools/perf/util/scripting-engines/trace-event-perl.c +1 -0
index a9f22694eed1..5f06378a482b 100644
@@ -38,6 +38,7 @@
 #include "../callchain.h"
 #include "../machine.h"
 #include "../map.h"
+#include "../symbol.h"
 #include "../thread.h"
 #include "../event.h"
 #include "../trace-event.h"
tools/perf/util/scripting-engines/trace-event-python.c +1 -0
index d9c83776a80f..0e17db41b49b 100644
@@ -45,6 +45,7 @@
 #include "../trace-event.h"
 #include "../call-path.h"
 #include "map.h"
+#include "symbol.h"
 #include "thread_map.h"
 #include "cpumap.h"
 #include "print_binary.h"
tools/perf/util/session.c +1 -0
index e9755a649993..2012396abb7c 100644
@@ -14,6 +14,7 @@
 #include "evsel.h"
 #include "memswap.h"
 #include "map.h"
+#include "symbol.h"
 #include "session.h"
 #include "tool.h"
 #include "sort.h"
tools/perf/util/thread.c +1 -0
index c83372329f89..4c179fef442d 100644
@@ -12,6 +12,7 @@
 #include "debug.h"
 #include "namespaces.h"
 #include "comm.h"
+#include "symbol.h"
 #include "unwind.h"
 
 #include <api/fs/fs.h>
tools/perf/util/unwind-libdw.c +1 -0
index 8ea7c89e73fd..407d0167b942 100644
@@ -9,6 +9,7 @@
 #include "unwind-libdw.h"
 #include "machine.h"
 #include "map.h"
+#include "symbol.h"
 #include "thread.h"
 #include <linux/types.h>
 #include "event.h"
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 11/53 perf evsel: No need to include symbol.h in evsel.h, symbol_conf.h is enough

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

To reduce the header dependency and avoid unnecessary rebuilds when things change in symbol.h.

---
 tools/perf/util/evsel.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/evsel.h +1 -1
index 29c5eb68c44b..cc578e02e08f 100644
@@ -8,7 +8,7 @@
 #include <linux/perf_event.h>
 #include <linux/types.h>
 #include "xyarray.h"
-#include "symbol.h"
+#include "symbol_conf.h"
 #include "cpumap.h"
 #include "counts.h"
 
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 12/53 perf thread: Don't include symbol.h, symbol_conf.h is enough

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Also add stdio.h to get the FILE definition.

---
 tools/perf/util/thread.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/perf/util/thread.h +4 -1
index 856cf1a9040a..8276ffeec556 100644
@@ -5,14 +5,17 @@
 #include <linux/refcount.h>
 #include <linux/rbtree.h>
 #include <linux/list.h>
+#include <stdio.h>
 #include <unistd.h>
 #include <sys/types.h>
 #include "srccode.h"
-#include "symbol.h"
+#include "symbol_conf.h"
 #include <strlist.h>
 #include <intlist.h>
 #include "rwsem.h"
 
+struct addr_location;
+struct map;
 struct namespaces_event;
 struct thread_stack;
 struct unwind_libunwind_ops;
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH 13/53 perf tools: Add missing include <callchain.h> in various places

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Its getting it from hist.h and that will go away, as that header doesn't need callchain.h at all.

---
 tools/perf/ui/browsers/hists.c | 1 +
 tools/perf/ui/gtk/hists.c      | 1 +
 tools/perf/ui/hist.c           | 1 +
 tools/perf/ui/stdio/hist.c     | 1 +
 tools/perf/util/config.c       | 1 +
 tools/perf/util/hist.c         | 1 +
 6 files changed, 6 insertions(+)
tools/perf/ui/browsers/hists.c +1 -0
index ac176b48178c..aef800d97ea1 100644
@@ -8,6 +8,7 @@
 #include <linux/rbtree.h>
 #include <sys/ttydefaults.h>
 
+#include "../../util/callchain.h"
 #include "../../util/evsel.h"
 #include "../../util/evlist.h"
 #include "../../util/hist.h"
tools/perf/ui/gtk/hists.c +1 -0
index 74414ccd8c84..0c08890f006a 100644
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "../evlist.h"
 #include "../cache.h"
+#include "../callchain.h"
 #include "../evsel.h"
 #include "../sort.h"
 #include "../hist.h"
tools/perf/ui/hist.c +1 -0
index fe3dfaa64a91..412d6f1626e3 100644
@@ -3,6 +3,7 @@
 #include <math.h>
 #include <linux/compiler.h>
 
+#include "../util/callchain.h"
 #include "../util/hist.h"
 #include "../util/util.h"
 #include "../util/sort.h"
tools/perf/ui/stdio/hist.c +1 -0
index f25116f70878..a60f2993d390 100644
@@ -2,6 +2,7 @@
 #include <stdio.h>
 #include <linux/string.h>
 
+#include "../../util/callchain.h"
 #include "../../util/util.h"
 #include "../../util/hist.h"
 #include "../../util/map.h"
tools/perf/util/config.c +1 -0
index 1ea8f898f1a1..fa092511c52b 100644
@@ -13,6 +13,7 @@
 #include <sys/param.h>
 #include "util.h"
 #include "cache.h"
+#include "callchain.h"
 #include <subcmd/exec-cmd.h>
 #include "util/event.h"  /* proc_map_timeout */
 #include "util/hist.h"  /* perf_hist_config */
tools/perf/util/hist.c +1 -0
index 3560ad2e5551..7f9df74ab893 100644
@@ -1,4 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
+#include "callchain.h"
 #include "util.h"
 #include "build-id.h"
 #include "hist.h"
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH 14/53 perf hist: Remove the needless callchain.h include from hist.h

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

Nothing that is provided by callchain.h is used there, just things that should've be directly included in hist.h, such as rbtree.h and a map_symbol forward declaration.

Remove it so that we reduce the headers dependency tree.

---
 tools/perf/util/hist.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/perf/util/hist.h +2 -1
index 38a72eb81427..6b872079ead5 100644
@@ -2,9 +2,9 @@
 #ifndef __PERF_HIST_H
 #define __PERF_HIST_H
 
+#include <linux/rbtree.h>
 #include <linux/types.h>
 #include <pthread.h>
-#include "callchain.h"
 #include "evsel.h"
 #include "header.h"
 #include "color.h"
@@ -13,6 +13,7 @@
 struct hist_entry;
 struct hist_entry_ops;
 struct addr_location;
+struct map_symbol;
 struct mem_info;
 struct branch_info;
 struct symbol;
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH 15/53 perf tests pmu: Add missing headers

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

It needs the definitions for PATH_MAX and snprintf, was getting it by luck from headers it included and that are now being sanitized.

---
 tools/perf/tests/pmu.c | 2 ++
 1 file changed, 2 insertions(+)
tools/perf/tests/pmu.c +2 -0
index 7bedf8608fdd..14a78898d79e 100644
@@ -4,7 +4,9 @@
 #include "util.h"
 #include "tests.h"
 #include <errno.h>
+#include <stdio.h>
 #include <linux/kernel.h>
+#include <linux/limits.h>
 
 /* Simulated format definitions. */
 static struct test_format {
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH 16/53 perf pmu: Remove needless evsel.h include, only needs one fwd decl

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

To reduce the header dependency tree.

---
 tools/perf/util/pmu.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
tools/perf/util/pmu.h +2 -1
index 76fecec7b3f9..ffed23fb920a 100644
@@ -6,9 +6,10 @@
 #include <linux/compiler.h>
 #include <linux/perf_event.h>
 #include <stdbool.h>
-#include "evsel.h"
 #include "parse-events.h"
 
+struct perf_evsel_config_term;
+
 enum {
 	PERF_PMU_FORMAT_VALUE_CONFIG,
 	PERF_PMU_FORMAT_VALUE_CONFIG1,
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH 17/53 perf kvm stat: Replace kvm-stat.h includes with forward declarations

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

To reduce the include header dependency tree and speed up perf builds.

---
 tools/perf/arch/powerpc/util/kvm-stat.c | 1 +
 tools/perf/arch/s390/util/kvm-stat.c    | 1 +
 tools/perf/arch/x86/util/kvm-stat.c     | 1 +
 tools/perf/util/kvm-stat.h              | 7 ++++---
 4 files changed, 7 insertions(+), 3 deletions(-)
tools/perf/arch/powerpc/util/kvm-stat.c +1 -0
index 596ad6aedaac..86e64c47d8ea 100644
@@ -3,6 +3,7 @@
 #include "util/kvm-stat.h"
 #include "util/parse-events.h"
 #include "util/debug.h"
+#include "util/evsel.h"
 
 #include "book3s_hv_exits.h"
 #include "book3s_hcalls.h"
tools/perf/arch/s390/util/kvm-stat.c +1 -0
index aaabab5e2830..7e3961a4b292 100644
@@ -11,6 +11,7 @@
 
 #include <errno.h>
 #include "../../util/kvm-stat.h"
+#include "../../util/evsel.h"
 #include <asm/sie.h>
 
 define_exit_reasons_table(sie_exit_reasons, sie_intercept_code);
tools/perf/arch/x86/util/kvm-stat.c +1 -0
index 081353d7b095..865a9762f22e 100644
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <errno.h>
 #include "../../util/kvm-stat.h"
+#include "../../util/evsel.h"
 #include <asm/svm.h>
 #include <asm/vmx.h>
 #include <asm/kvm.h>
tools/perf/util/kvm-stat.h +4 -3
index 7b1f06567521..1403dec189b4 100644
@@ -3,12 +3,13 @@
 #define __PERF_KVM_STAT_H
 
 #include "../perf.h"
-#include "evsel.h"
-#include "evlist.h"
-#include "session.h"
 #include "tool.h"
 #include "stat.h"
 
+struct perf_evsel;
+struct perf_evlist;
+struct perf_session;
+
 struct event_key {
 	#define INVALID_KEY     (~0ULL)
 	u64 key;
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH 18/53 perf powerpc kvm-stat: Add missing evlist.h header

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

This header was being obtained indirectly, by sheer luck, add it.

---
 tools/perf/arch/powerpc/util/kvm-stat.c | 1 +
 1 file changed, 1 insertion(+)
tools/perf/arch/powerpc/util/kvm-stat.c +1 -0
index 86e64c47d8ea..f9db341c47b6 100644
@@ -4,6 +4,7 @@
 #include "util/parse-events.h"
 #include "util/debug.h"
 #include "util/evsel.h"
+#include "util/evlist.h"
 
 #include "book3s_hv_exits.h"
 #include "book3s_hcalls.h"
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH 19/53 perf bpf-loader: Remove unecessary includes from bpf-loader.h

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

To cut the header dep tree, to get unecessary object rebuilds to be reduced when a change happens in headers.

---
 tools/perf/util/bpf-loader.c | 1 +
 tools/perf/util/bpf-loader.h | 7 +++----
 2 files changed, 4 insertions(+), 4 deletions(-)
tools/perf/util/bpf-loader.c +1 -0
index 2f3eb6d293ee..6e68698aa0ad 100644
@@ -15,6 +15,7 @@
 #include <errno.h>
 #include "perf.h"
 #include "debug.h"
+#include "evlist.h"
 #include "bpf-loader.h"
 #include "bpf-prologue.h"
 #include "probe-event.h"
tools/perf/util/bpf-loader.h +3 -4
index 62d245a90e1d..3f46856e3330 100644
@@ -8,11 +8,7 @@
 
 #include <linux/compiler.h>
 #include <linux/err.h>
-#include <string.h>
 #include <bpf/libbpf.h>
-#include "probe-event.h"
-#include "evlist.h"
-#include "debug.h"
 
 enum bpf_loader_errno {
 	__BPF_LOADER_ERRNO__START = __LIBBPF_ERRNO__START - 100,
@@ -44,6 +40,7 @@ enum bpf_loader_errno {
 };
 
 struct perf_evsel;
+struct perf_evlist;
 struct bpf_object;
 struct parse_events_term;
 #define PERF_BPF_PROBE_GROUP "perf_bpf_probe"
@@ -87,6 +84,8 @@ struct perf_evsel *bpf__setup_output_event(struct perf_evlist *evlist, const cha
 int bpf__strerror_setup_output_event(struct perf_evlist *evlist, int err, char *buf, size_t size);
 #else
 #include <errno.h>
+#include <string.h>
+#include "debug.h"
 
 static inline struct bpf_object *
 bpf__prepare_load(const char *filename __maybe_unused,
Signature · 1 line
2.20.1
author maintainer
#20 lore raw

PATCH 20/53 perf/aux: Make perf_event accessible to setup_aux()

In reply to Arnaldo Carvalho de Melo

From: Mathieu Poirier <[email protected]>

When pmu::setup_aux() is called the coresight PMU needs to know which sink to use for the session by looking up the information in the event's attr::config2 field.

As such simply replace the cpu information by the complete perf_event structure and change all affected customers.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
---
 arch/s390/kernel/perf_cpum_sf.c                  | 6 +++---
 arch/x86/events/intel/bts.c                      | 4 +++-
 arch/x86/events/intel/pt.c                       | 5 +++--
 drivers/hwtracing/coresight/coresight-etm-perf.c | 6 +++---
 drivers/perf/arm_spe_pmu.c                       | 6 +++---
 include/linux/perf_event.h                       | 2 +-
 kernel/events/ring_buffer.c                      | 2 +-
 7 files changed, 17 insertions(+), 14 deletions(-)
arch/s390/kernel/perf_cpum_sf.c +3 -3
index bfabeb1889cc..1266194afb02 100644
@@ -1600,7 +1600,7 @@ static void aux_sdb_init(unsigned long sdb)
 
 /*
  * aux_buffer_setup() - Setup AUX buffer for diagnostic mode sampling
- * @cpu:	On which to allocate, -1 means current
+ * @event:	Event the buffer is setup for, event->cpu == -1 means current
  * @pages:	Array of pointers to buffer pages passed from perf core
  * @nr_pages:	Total pages
  * @snapshot:	Flag for snapshot mode
@@ -1612,8 +1612,8 @@ static void aux_sdb_init(unsigned long sdb)
  *
  * Return the private AUX buffer structure if success or NULL if fails.
  */
-static void *aux_buffer_setup(int cpu, void **pages, int nr_pages,
-			      bool snapshot)
+static void *aux_buffer_setup(struct perf_event *event, void **pages,
+			      int nr_pages, bool snapshot)
 {
 	struct sf_buffer *sfb;
 	struct aux_buffer *aux;
arch/x86/events/intel/bts.c +3 -1
index a01ef1b0f883..7cdd7b13bbda 100644
@@ -77,10 +77,12 @@ static size_t buf_size(struct page *page)
 }
 
 static void *
-bts_buffer_setup_aux(int cpu, void **pages, int nr_pages, bool overwrite)
+bts_buffer_setup_aux(struct perf_event *event, void **pages,
+		     int nr_pages, bool overwrite)
 {
 	struct bts_buffer *buf;
 	struct page *page;
+	int cpu = event->cpu;
 	int node = (cpu == -1) ? cpu : cpu_to_node(cpu);
 	unsigned long offset;
 	size_t size = nr_pages << PAGE_SHIFT;
arch/x86/events/intel/pt.c +3 -2
index 9494ca68fd9d..c0e86ff21f81 100644
@@ -1114,10 +1114,11 @@ static int pt_buffer_init_topa(struct pt_buffer *buf, unsigned long nr_pages,
  * Return:	Our private PT buffer structure.
  */
 static void *
-pt_buffer_setup_aux(int cpu, void **pages, int nr_pages, bool snapshot)
+pt_buffer_setup_aux(struct perf_event *event, void **pages,
+		    int nr_pages, bool snapshot)
 {
 	struct pt_buffer *buf;
-	int node, ret;
+	int node, ret, cpu = event->cpu;
 
 	if (!nr_pages)
 		return NULL;
drivers/hwtracing/coresight/coresight-etm-perf.c +3 -3
index abe8249b893b..f21eb28b6782 100644
@@ -177,15 +177,15 @@ static void etm_free_aux(void *data)
 	schedule_work(&event_data->work);
 }
 
-static void *etm_setup_aux(int event_cpu, void **pages,
+static void *etm_setup_aux(struct perf_event *event, void **pages,
 			   int nr_pages, bool overwrite)
 {
-	int cpu;
+	int cpu = event->cpu;
 	cpumask_t *mask;
 	struct coresight_device *sink;
 	struct etm_event_data *event_data = NULL;
 
-	event_data = alloc_event_data(event_cpu);
+	event_data = alloc_event_data(cpu);
 	if (!event_data)
 		return NULL;
 	INIT_WORK(&event_data->work, free_event_data);
drivers/perf/arm_spe_pmu.c +3 -3
index 8e46a9dad2fa..7cb766dafe85 100644
@@ -824,10 +824,10 @@ static void arm_spe_pmu_read(struct perf_event *event)
 {
 }
 
-static void *arm_spe_pmu_setup_aux(int cpu, void **pages, int nr_pages,
-				   bool snapshot)
+static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages,
+				   int nr_pages, bool snapshot)
 {
-	int i;
+	int i, cpu = event->cpu;
 	struct page **pglist;
 	struct arm_spe_pmu_buf *buf;
 
include/linux/perf_event.h +1 -1
index 6cb5d483ab34..d9c3610e0e25 100644
@@ -410,7 +410,7 @@ struct pmu {
 	/*
 	 * Set up pmu-private data structures for an AUX area
 	 */
-	void *(*setup_aux)		(int cpu, void **pages,
+	void *(*setup_aux)		(struct perf_event *event, void **pages,
 					 int nr_pages, bool overwrite);
 					/* optional */
 
kernel/events/ring_buffer.c +1 -1
index 805f0423ee0b..70ae2422cbaf 100644
@@ -657,7 +657,7 @@ int rb_alloc_aux(struct ring_buffer *rb, struct perf_event *event,
 			goto out;
 	}
 
-	rb->aux_priv = event->pmu->setup_aux(event->cpu, rb->aux_pages, nr_pages,
+	rb->aux_priv = event->pmu->setup_aux(event, rb->aux_pages, nr_pages,
 					     overwrite);
 	if (!rb->aux_priv)
 		goto out;
Signature · 1 line
2.20.1
author maintainer
#21 lore raw

PATCH 21/53 coresight: perf: Add "sinks" group to PMU directory

In reply to Arnaldo Carvalho de Melo

From: Mathieu Poirier <[email protected]>

Add a "sinks" directory entry so that users can see all the sinks available in the system in a single place. Individual sink are added as they are registered with the coresight bus.

Committer tests:

Test built on a ubuntu 18.04 container with a cross build environment to arm64, the new field is there, need to find a machine with this feature to do further testing in the future.

  root@d15263e5734a:/git/perf# grep CORESIGHT /tmp/build/v5.0-rc2+/.config
  CONFIG_CORESIGHT=y
  CONFIG_CORESIGHT_LINKS_AND_SINKS=y
  CONFIG_CORESIGHT_LINK_AND_SINK_TMC=y
  CONFIG_CORESIGHT_CATU=y
  CONFIG_CORESIGHT_SINK_TPIU=y
  CONFIG_CORESIGHT_SINK_ETBV10=y
  CONFIG_CORESIGHT_SOURCE_ETM4X=y
  CONFIG_CORESIGHT_DYNAMIC_REPLICATOR=y
  CONFIG_CORESIGHT_STM=y
  CONFIG_CORESIGHT_CPU_DEBUG=m
  root@d15263e5734a:/git/perf#
  root@d15263e5734a:/git/perf# file /tmp/build/v5.0-rc2+/drivers/hwtracing/coresight/*.o
  .../coresight/coresight-catu.o:               ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-cpu-debug.mod.o:      ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-cpu-debug.o:          ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-dynamic-replicator.o: ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-etb10.o:              ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-etm-perf.o:           ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-etm4x-sysfs.o:        ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-etm4x.o:              ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-funnel.o:             ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-replicator.o:         ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-stm.o:                ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-tmc-etf.o:            ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-tmc-etr.o:            ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-tmc.o:                ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight-tpiu.o:               ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/coresight.o:                    ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  .../coresight/of_coresight.o:                 ELF 64-bit MSB relocatable, ARM aarch64, version 1 (SYSV), not stripped
  root@d15263e5734a:/git/perf#
  root@d15263e5734a:/git/perf# pahole -C coresight_device /tmp/build/v5.0-rc2+/drivers/hwtracing/coresight/coresight.o
  struct coresight_device {
          struct coresight_connection * conns;             /*     0     8 */
          int                        nr_inport;            /*     8     4 */
          int                        nr_outport;           /*    12     4 */
          enum coresight_dev_type    type;                 /*    16     4 */
          union coresight_dev_subtype subtype;             /*    20     8 */

/* XXX 4 bytes hole, try to pack */

const struct coresight_ops * ops; /* 32 8 */
struct device dev; /* 40 1408 */

/* XXX last struct has 7 bytes of padding */

/* --- cacheline 22 boundary (1408 bytes) was 40 bytes ago --- */
atomic_t * refcnt; /* 1448 8 */
bool orphan; /* 1456 1 */
bool enable; /* 1457 1 */
bool activated; /* 1458 1 */

/* XXX 5 bytes hole, try to pack */

struct dev_ext_attribute * ea; /* 1464 8 */

/* size: 1472, cachelines: 23, members: 12 */ /* sum members: 1463, holes: 2, sum holes: 9 */ /* paddings: 1, sum paddings: 7 */
};
root@d15263e5734a:/git/perf#

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
---
 .../hwtracing/coresight/coresight-etm-perf.c  | 82 +++++++++++++++++++
 .../hwtracing/coresight/coresight-etm-perf.h  |  6 +-
 drivers/hwtracing/coresight/coresight.c       | 18 ++++
 include/linux/coresight.h                     |  7 +-
 4 files changed, 110 insertions(+), 3 deletions(-)
drivers/hwtracing/coresight/coresight-etm-perf.c +82 -0
index f21eb28b6782..cdbdb28dc175 100644
@@ -14,6 +14,7 @@
 #include <linux/perf_event.h>
 #include <linux/percpu-defs.h>
 #include <linux/slab.h>
+#include <linux/stringhash.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
 
@@ -43,8 +44,18 @@ static const struct attribute_group etm_pmu_format_group = {
 	.attrs  = etm_config_formats_attr,
 };
 
+static struct attribute *etm_config_sinks_attr[] = {
+	NULL,
+};
+
+static const struct attribute_group etm_pmu_sinks_group = {
+	.name   = "sinks",
+	.attrs  = etm_config_sinks_attr,
+};
+
 static const struct attribute_group *etm_pmu_attr_groups[] = {
 	&etm_pmu_format_group,
+	&etm_pmu_sinks_group,
 	NULL,
 };
 
@@ -479,6 +490,77 @@ int etm_perf_symlink(struct coresight_device *csdev, bool link)
 	return 0;
 }
 
+static ssize_t etm_perf_sink_name_show(struct device *dev,
+				       struct device_attribute *dattr,
+				       char *buf)
+{
+	struct dev_ext_attribute *ea;
+
+	ea = container_of(dattr, struct dev_ext_attribute, attr);
+	return scnprintf(buf, PAGE_SIZE, "0x%lx\n", (unsigned long)(ea->var));
+}
+
+int etm_perf_add_symlink_sink(struct coresight_device *csdev)
+{
+	int ret;
+	unsigned long hash;
+	const char *name;
+	struct device *pmu_dev = etm_pmu.dev;
+	struct device *pdev = csdev->dev.parent;
+	struct dev_ext_attribute *ea;
+
+	if (csdev->type != CORESIGHT_DEV_TYPE_SINK &&
+	    csdev->type != CORESIGHT_DEV_TYPE_LINKSINK)
+		return -EINVAL;
+
+	if (csdev->ea != NULL)
+		return -EINVAL;
+
+	if (!etm_perf_up)
+		return -EPROBE_DEFER;
+
+	ea = devm_kzalloc(pdev, sizeof(*ea), GFP_KERNEL);
+	if (!ea)
+		return -ENOMEM;
+
+	name = dev_name(pdev);
+	/* See function coresight_get_sink_by_id() to know where this is used */
+	hash = hashlen_hash(hashlen_string(NULL, name));
+
+	ea->attr.attr.name = devm_kstrdup(pdev, name, GFP_KERNEL);
+	if (!ea->attr.attr.name)
+		return -ENOMEM;
+
+	ea->attr.attr.mode = 0444;
+	ea->attr.show = etm_perf_sink_name_show;
+	ea->var = (unsigned long *)hash;
+
+	ret = sysfs_add_file_to_group(&pmu_dev->kobj,
+				      &ea->attr.attr, "sinks");
+
+	if (!ret)
+		csdev->ea = ea;
+
+	return ret;
+}
+
+void etm_perf_del_symlink_sink(struct coresight_device *csdev)
+{
+	struct device *pmu_dev = etm_pmu.dev;
+	struct dev_ext_attribute *ea = csdev->ea;
+
+	if (csdev->type != CORESIGHT_DEV_TYPE_SINK &&
+	    csdev->type != CORESIGHT_DEV_TYPE_LINKSINK)
+		return;
+
+	if (!ea)
+		return;
+
+	sysfs_remove_file_from_group(&pmu_dev->kobj,
+				     &ea->attr.attr, "sinks");
+	csdev->ea = NULL;
+}
+
 static int __init etm_perf_init(void)
 {
 	int ret;
drivers/hwtracing/coresight/coresight-etm-perf.h +5 -1
index da7d9336a15c..015213abe00a 100644
@@ -59,6 +59,8 @@ struct etm_event_data {
 
 #ifdef CONFIG_CORESIGHT
 int etm_perf_symlink(struct coresight_device *csdev, bool link);
+int etm_perf_add_symlink_sink(struct coresight_device *csdev);
+void etm_perf_del_symlink_sink(struct coresight_device *csdev);
 static inline void *etm_perf_sink_config(struct perf_output_handle *handle)
 {
 	struct etm_event_data *data = perf_get_aux(handle);
@@ -70,7 +72,9 @@ static inline void *etm_perf_sink_config(struct perf_output_handle *handle)
 #else
 static inline int etm_perf_symlink(struct coresight_device *csdev, bool link)
 { return -EINVAL; }
-
+int etm_perf_add_symlink_sink(struct coresight_device *csdev)
+{ return -EINVAL; }
+void etm_perf_del_symlink_sink(struct coresight_device *csdev) {}
 static inline void *etm_perf_sink_config(struct perf_output_handle *handle)
 {
 	return NULL;
drivers/hwtracing/coresight/coresight.c +18 -0
index 2b0df1a0a8df..d7fa90be6f42 100644
@@ -18,6 +18,7 @@
 #include <linux/delay.h>
 #include <linux/pm_runtime.h>
 
+#include "coresight-etm-perf.h"
 #include "coresight-priv.h"
 
 static DEFINE_MUTEX(coresight_mutex);
@@ -1167,6 +1168,22 @@ struct coresight_device *coresight_register(struct coresight_desc *desc)
 		goto err_out;
 	}
 
+	if (csdev->type == CORESIGHT_DEV_TYPE_SINK ||
+	    csdev->type == CORESIGHT_DEV_TYPE_LINKSINK) {
+		ret = etm_perf_add_symlink_sink(csdev);
+
+		if (ret) {
+			device_unregister(&csdev->dev);
+			/*
+			 * As with the above, all resources are free'd
+			 * explicitly via coresight_device_release() triggered
+			 * from put_device(), which is in turn called from
+			 * function device_unregister().
+			 */
+			goto err_out;
+		}
+	}
+
 	mutex_lock(&coresight_mutex);
 
 	coresight_fixup_device_conns(csdev);
@@ -1185,6 +1202,7 @@ EXPORT_SYMBOL_GPL(coresight_register);
 
 void coresight_unregister(struct coresight_device *csdev)
 {
+	etm_perf_del_symlink_sink(csdev);
 	/* Remove references of that device in the topology */
 	coresight_remove_conns(csdev);
 	device_unregister(&csdev->dev);
include/linux/coresight.h +5 -2
index 46c67a764877..7b87965f7a65 100644
@@ -154,8 +154,9 @@ struct coresight_connection {
  * @orphan:	true if the component has connections that haven't been linked.
  * @enable:	'true' if component is currently part of an active path.
  * @activated:	'true' only if a _sink_ has been activated.  A sink can be
-		activated but not yet enabled.  Enabling for a _sink_
-		happens when a source has been selected for that it.
+ *		activated but not yet enabled.  Enabling for a _sink_
+ *		appens when a source has been selected for that it.
+ * @ea:		Device attribute for sink representation under PMU directory.
  */
 struct coresight_device {
 	struct coresight_connection *conns;
@@ -168,7 +169,9 @@ struct coresight_device {
 	atomic_t *refcnt;
 	bool orphan;
 	bool enable;	/* true only if configured as part of a path */
+	/* sink specific fields */
 	bool activated;	/* true only if a sink is part of a path */
+	struct dev_ext_attribute *ea;
 };
 
 #define to_coresight_device(d) container_of(d, struct coresight_device, dev)
Signature · 1 line
2.20.1
author maintainer
#22 lore raw

PATCH 22/53 coresight: Use event attributes for sink selection

In reply to Arnaldo Carvalho de Melo

From: Mathieu Poirier <[email protected]>

This patch uses the information conveyed by perf_event::attr::config2 to select a sink to use for the session. That way a sink can easily be selected to be used by more than one source, something that isn't currently possible with the sysfs implementation.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
---
 .../hwtracing/coresight/coresight-etm-perf.c  | 24 +++++------
 drivers/hwtracing/coresight/coresight-priv.h  |  1 +
 drivers/hwtracing/coresight/coresight.c       | 42 +++++++++++++++++++
 3 files changed, 55 insertions(+), 12 deletions(-)
drivers/hwtracing/coresight/coresight-etm-perf.c +12 -12
index cdbdb28dc175..8c88bf0a1e5f 100644
@@ -31,11 +31,14 @@ static DEFINE_PER_CPU(struct coresight_device *, csdev_src);
 PMU_FORMAT_ATTR(cycacc,		"config:" __stringify(ETM_OPT_CYCACC));
 PMU_FORMAT_ATTR(timestamp,	"config:" __stringify(ETM_OPT_TS));
 PMU_FORMAT_ATTR(retstack,	"config:" __stringify(ETM_OPT_RETSTK));
+/* Sink ID - same for all ETMs */
+PMU_FORMAT_ATTR(sinkid,		"config2:0-31");
 
 static struct attribute *etm_config_formats_attr[] = {
 	&format_attr_cycacc.attr,
 	&format_attr_timestamp.attr,
 	&format_attr_retstack.attr,
+	&format_attr_sinkid.attr,
 	NULL,
 };
 
@@ -191,6 +194,7 @@ static void etm_free_aux(void *data)
 static void *etm_setup_aux(struct perf_event *event, void **pages,
 			   int nr_pages, bool overwrite)
 {
+	u32 id;
 	int cpu = event->cpu;
 	cpumask_t *mask;
 	struct coresight_device *sink;
@@ -201,18 +205,14 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
 		return NULL;
 	INIT_WORK(&event_data->work, free_event_data);
 
-	/*
-	 * In theory nothing prevent tracers in a trace session from being
-	 * associated with different sinks, nor having a sink per tracer.  But
-	 * until we have HW with this kind of topology we need to assume tracers
-	 * in a trace session are using the same sink.  Therefore go through
-	 * the coresight bus and pick the first enabled sink.
-	 *
-	 * When operated from sysFS users are responsible to enable the sink
-	 * while from perf, the perf tools will do it based on the choice made
-	 * on the cmd line.  As such the "enable_sink" flag in sysFS is reset.
-	 */
-	sink = coresight_get_enabled_sink(true);
+	/* First get the selected sink from user space. */
+	if (event->attr.config2) {
+		id = (u32)event->attr.config2;
+		sink = coresight_get_sink_by_id(id);
+	} else {
+		sink = coresight_get_enabled_sink(true);
+	}
+
 	if (!sink || !sink_ops(sink)->alloc_buffer)
 		goto err;
 
drivers/hwtracing/coresight/coresight-priv.h +1 -0
index 579f34943bf1..b936c6d7e13f 100644
@@ -147,6 +147,7 @@ void coresight_disable_path(struct list_head *path);
 int coresight_enable_path(struct list_head *path, u32 mode, void *sink_data);
 struct coresight_device *coresight_get_sink(struct list_head *path);
 struct coresight_device *coresight_get_enabled_sink(bool reset);
+struct coresight_device *coresight_get_sink_by_id(u32 id);
 struct list_head *coresight_build_path(struct coresight_device *csdev,
 				       struct coresight_device *sink);
 void coresight_release_path(struct list_head *path);
drivers/hwtracing/coresight/coresight.c +42 -0

54 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#23 lore raw

PATCH 23/53 perf pmu: Move EVENT_SOURCE_DEVICE_PATH to PMU header file

In reply to Arnaldo Carvalho de Melo

From: Mathieu Poirier <[email protected]>

Move definition of EVENT_SOURCE_DEVICE_PATH to pmu.h so that it can be used by other files than pmu.c

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
---
 tools/perf/util/pmu.c | 2 --
 tools/perf/util/pmu.h | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)
tools/perf/util/pmu.c +0 -2
index 11a234740632..51d437f55d18 100644
@@ -29,8 +29,6 @@ struct perf_pmu_format {
 	struct list_head list;
 };
 
-#define EVENT_SOURCE_DEVICE_PATH "/bus/event_source/devices/"
-
 int perf_pmu_parse(struct list_head *list, char *name);
 extern FILE *perf_pmu_in;
 
tools/perf/util/pmu.h +1 -0
index ffed23fb920a..1c12a61ed0dc 100644
@@ -17,6 +17,7 @@ enum {
 };
 
 #define PERF_PMU_FORMAT_BITS 64
+#define EVENT_SOURCE_DEVICE_PATH "/bus/event_source/devices/"
 
 struct perf_event_attr;
 
Signature · 1 line
2.20.1
author maintainer
#24 lore raw

PATCH 24/53 perf arm cs-etm: Use event attributes to send sink information to kernel

In reply to Arnaldo Carvalho de Melo

From: Mathieu Poirier <[email protected]>

The communication of sink information for a trace session doesn't work when more than on CPU is involved in the scenario due to the static nature of sysfs. As such communicate the sink information to each event by using the perf_event::attr:config2 attribute. The information sent to the kernel is an hash of the sink's name, which is unique in a system.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
---
 tools/perf/arch/arm/util/cs-etm.c | 44 +++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
tools/perf/arch/arm/util/cs-etm.c +44 -0
index 2f595cd73da6..4f31cf0d1e6d 100644
@@ -5,6 +5,7 @@
  */
 
 #include <api/fs/fs.h>
+#include <linux/bits.h>
 #include <linux/bitops.h>
 #include <linux/compiler.h>
 #include <linux/coresight-pmu.h>
@@ -22,6 +23,7 @@
 #include "../../util/thread_map.h"
 #include "../../util/cs-etm.h"
 
+#include <errno.h>
 #include <stdlib.h>
 #include <sys/stat.h>
 
@@ -60,10 +62,48 @@ static int cs_etm_parse_snapshot_options(struct auxtrace_record *itr,
 	return 0;
 }
 
+static int cs_etm_set_sink_attr(struct perf_pmu *pmu,
+				struct perf_evsel *evsel)
+{
+	char msg[BUFSIZ], path[PATH_MAX], *sink;
+	struct perf_evsel_config_term *term;
+	int ret = -EINVAL;
+	u32 hash;
+
+	if (evsel->attr.config2 & GENMASK(31, 0))
+		return 0;
+
+	list_for_each_entry(term, &evsel->config_terms, list) {
+		if (term->type != PERF_EVSEL__CONFIG_TERM_DRV_CFG)
+			continue;
+
+		sink = term->val.drv_cfg;
+		snprintf(path, PATH_MAX, "sinks/%s", sink);
+
+		ret = perf_pmu__scan_file(pmu, path, "%x", &hash);
+		if (ret != 1) {
+			pr_err("failed to set sink \"%s\" on event %s with %d (%s)\n",
+			       sink, perf_evsel__name(evsel), errno,
+			       str_error_r(errno, msg, sizeof(msg)));
+			return ret;
+		}
+
+		evsel->attr.config2 |= hash;
+		return 0;
+	}
+
+	/*
+	 * No sink was provided on the command line - for _now_ treat
+	 * this as an error.
+	 */
+	return ret;
+}
+
 static int cs_etm_recording_options(struct auxtrace_record *itr,
 				    struct perf_evlist *evlist,
 				    struct record_opts *opts)
 {
+	int ret;
 	struct cs_etm_recording *ptr =
 				container_of(itr, struct cs_etm_recording, itr);
 	struct perf_pmu *cs_etm_pmu = ptr->cs_etm_pmu;
@@ -92,6 +132,10 @@ static int cs_etm_recording_options(struct auxtrace_record *itr,
 	if (!cs_etm_evsel)
 		return 0;
 
+	ret = cs_etm_set_sink_attr(cs_etm_pmu, cs_etm_evsel);
+	if (ret)
+		return ret;
+
 	if (opts->use_clockid) {
 		pr_err("Cannot use clockid (-k option) with %s\n",
 		       CORESIGHT_ETM_PMU_NAME);
Signature · 1 line
2.20.1
author maintainer
#25 lore raw

PATCH 25/53 perf coresight: Remove set_drv_config() API

In reply to Arnaldo Carvalho de Melo

From: Mathieu Poirier <[email protected]>

Now that the event's config2 attribute is used to communicate sink selection to the kernel, remove the old set_drv_config() implementation since it is no longer needed.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
---
 tools/perf/arch/arm/util/cs-etm.c | 54 -------------------------------
 tools/perf/arch/arm/util/cs-etm.h |  3 --
 tools/perf/arch/arm/util/pmu.c    |  2 --
 3 files changed, 59 deletions(-)
tools/perf/arch/arm/util/cs-etm.c +0 -54
index 4f31cf0d1e6d..911426721170 100644
@@ -27,9 +27,6 @@
 #include <stdlib.h>
 #include <sys/stat.h>
 
-#define ENABLE_SINK_MAX	128
-#define CS_BUS_DEVICE_PATH "/bus/coresight/devices/"
-
 struct cs_etm_recording {
 	struct auxtrace_record	itr;
 	struct perf_pmu		*cs_etm_pmu;
@@ -642,54 +639,3 @@ struct auxtrace_record *cs_etm_record_init(int *err)
 out:
 	return NULL;
 }
-
-static FILE *cs_device__open_file(const char *name)
-{
-	struct stat st;
-	char path[PATH_MAX];
-	const char *sysfs;
-
-	sysfs = sysfs__mountpoint();
-	if (!sysfs)
-		return NULL;
-
-	snprintf(path, PATH_MAX,
-		 "%s" CS_BUS_DEVICE_PATH "%s", sysfs, name);
-
-	if (stat(path, &st) < 0)
-		return NULL;
-
-	return fopen(path, "w");
-
-}
-
-static int __printf(2, 3) cs_device__print_file(const char *name, const char *fmt, ...)
-{
-	va_list args;
-	FILE *file;
-	int ret = -EINVAL;
-
-	va_start(args, fmt);
-	file = cs_device__open_file(name);
-	if (file) {
-		ret = vfprintf(file, fmt, args);
-		fclose(file);
-	}
-	va_end(args);
-	return ret;
-}
-
-int cs_etm_set_drv_config(struct perf_evsel_config_term *term)
-{
-	int ret;
-	char enable_sink[ENABLE_SINK_MAX];
-
-	snprintf(enable_sink, ENABLE_SINK_MAX, "%s/%s",
-		 term->val.drv_cfg, "enable_sink");
-
-	ret = cs_device__print_file(enable_sink, "%d", 1);
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
tools/perf/arch/arm/util/cs-etm.h +0 -3
index 1a12e64f5127..a3354bda4fe8 100644
@@ -7,9 +7,6 @@
 #ifndef INCLUDE__PERF_CS_ETM_H__
 #define INCLUDE__PERF_CS_ETM_H__
 
-#include "../../util/evsel.h"
-
 struct auxtrace_record *cs_etm_record_init(int *err);
-int cs_etm_set_drv_config(struct perf_evsel_config_term *term);
 
 #endif
tools/perf/arch/arm/util/pmu.c +0 -2
index 64a677b518d0..bbc297a7e2e3 100644
@@ -9,7 +9,6 @@
 #include <linux/perf_event.h>
 #include <linux/string.h>
 
-#include "cs-etm.h"
 #include "arm-spe.h"
 #include "../../util/pmu.h"
 
@@ -20,7 +19,6 @@ struct perf_event_attr
 	if (!strcmp(pmu->name, CORESIGHT_ETM_PMU_NAME)) {
 		/* add ETM default config here */
 		pmu->selectable = true;
-		pmu->set_drv_config = cs_etm_set_drv_config;
 #if defined(__aarch64__)
 	} else if (strstarts(pmu->name, ARM_SPE_PMU_NAME)) {
 		return arm_spe_pmu_default_config(pmu);
Signature · 1 line
2.20.1
author maintainer
#26 lore raw

PATCH 26/53 perf pmu: Remove set_drv_config API

In reply to Arnaldo Carvalho de Melo

From: Mathieu Poirier <[email protected]>

CoreSight was the only client of the PMU's set_drv_config() API. Now that it is no longer needed by CoreSight remove it from the code base.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexei Starovoitov <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Heiko Carstens <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Mark Rutland <[email protected]>
Cc Martin Schwidefsky <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Will Deacon <[email protected]>
---
 tools/perf/builtin-record.c   | 10 -----
 tools/perf/builtin-stat.c     |  9 ----
 tools/perf/builtin-top.c      | 13 ------
 tools/perf/util/Build         |  1 -
 tools/perf/util/drv_configs.c | 78 -----------------------------------
 tools/perf/util/drv_configs.h | 26 ------------
 tools/perf/util/pmu.h         |  1 -
 7 files changed, 138 deletions(-)
 delete mode 100644 tools/perf/util/drv_configs.c
 delete mode 100644 tools/perf/util/drv_configs.h
tools/perf/builtin-record.c +0 -10
index 88ea11d57c6f..56e9d9e8c174 100644
@@ -23,7 +23,6 @@
 #include "util/evlist.h"
 #include "util/evsel.h"
 #include "util/debug.h"
-#include "util/drv_configs.h"
 #include "util/session.h"
 #include "util/tool.h"
 #include "util/symbol.h"
@@ -567,7 +566,6 @@ static int record__open(struct record *rec)
 	struct perf_evlist *evlist = rec->evlist;
 	struct perf_session *session = rec->session;
 	struct record_opts *opts = &rec->opts;
-	struct perf_evsel_config_term *err_term;
 	int rc = 0;
 
 	/*
@@ -620,14 +618,6 @@ static int record__open(struct record *rec)
 		goto out;
 	}
 
-	if (perf_evlist__apply_drv_configs(evlist, &pos, &err_term)) {
-		pr_err("failed to set config \"%s\" on event %s with %d (%s)\n",
-		      err_term->val.drv_cfg, perf_evsel__name(pos), errno,
-		      str_error_r(errno, msg, sizeof(msg)));
-		rc = -1;
-		goto out;
-	}
-
 	rc = record__mmap(rec);
 	if (rc)
 		goto out;
tools/perf/builtin-stat.c +0 -9
index e587808591e8..bb24f9c17f9a 100644
@@ -52,7 +52,6 @@
 #include "util/evlist.h"
 #include "util/evsel.h"
 #include "util/debug.h"
-#include "util/drv_configs.h"
 #include "util/color.h"
 #include "util/stat.h"
 #include "util/header.h"
@@ -417,7 +416,6 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 	int status = 0;
 	const bool forks = (argc > 0);
 	bool is_pipe = STAT_RECORD ? perf_stat.data.is_pipe : false;
-	struct perf_evsel_config_term *err_term;
 
 	if (interval) {
 		ts.tv_sec  = interval / USEC_PER_MSEC;
@@ -514,13 +512,6 @@ static int __run_perf_stat(int argc, const char **argv, int run_idx)
 		return -1;
 	}
 
-	if (perf_evlist__apply_drv_configs(evsel_list, &counter, &err_term)) {
-		pr_err("failed to set config \"%s\" on event %s with %d (%s)\n",
-		      err_term->val.drv_cfg, perf_evsel__name(counter), errno,
-		      str_error_r(errno, msg, sizeof(msg)));
-		return -1;
-	}
-
 	if (STAT_RECORD) {
 		int err, fd = perf_data__fd(&perf_stat.data);
 
tools/perf/builtin-top.c +0 -13
index 619406339e4b..231a90daa958 100644
@@ -25,7 +25,6 @@
 #include "util/bpf-event.h"
 #include "util/config.h"
 #include "util/color.h"
-#include "util/drv_configs.h"
 #include "util/evlist.h"
 #include "util/evsel.h"
 #include "util/event.h"
@@ -1186,10 +1185,6 @@ static void init_process_thread(struct perf_top *top)
 
 static int __cmd_top(struct perf_top *top)
 {
-	char msg[512];
-	struct perf_evsel *pos;
-	struct perf_evsel_config_term *err_term;
-	struct perf_evlist *evlist = top->evlist;
 	struct record_opts *opts = &top->record_opts;
 	pthread_t thread, thread_process;
 	int ret;
@@ -1240,14 +1235,6 @@ static int __cmd_top(struct perf_top *top)
 	if (ret)
 		goto out_delete;
 
-	ret = perf_evlist__apply_drv_configs(evlist, &pos, &err_term);
-	if (ret) {
-		pr_err("failed to set config \"%s\" on event %s with %d (%s)\n",
-			err_term->val.drv_cfg, perf_evsel__name(pos), errno,
-			str_error_r(errno, msg, sizeof(msg)));
-		goto out_delete;
-	}
-
 	top->session->evlist = top->evlist;
 	perf_session__set_id_hdr_size(top->session);
 
tools/perf/util/Build +0 -1
index b69d6294c88c..a36e6e5a6f4f 100644
@@ -107,7 +107,6 @@ libperf-y += term.o
 libperf-y += help-unknown-cmd.o
 libperf-y += mem-events.o
 libperf-y += vsprintf.o
-libperf-y += drv_configs.o
 libperf-y += units.o
 libperf-y += time-utils.o
 libperf-y += expr-bison.o
tools/perf/util/drv_configs.c deleted +0 -78

78 lines not on this page · raw message

tools/perf/util/drv_configs.h deleted +0 -26
deleted file mode 100644
index 32bc9babc2e0..000000000000
@@ -1,26 +0,0 @@
-/*
- * drv_configs.h: Interface to apply PMU specific configuration
- * Copyright (c) 2016-2018, Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- */
-
-#ifndef __PERF_DRV_CONFIGS_H
-#define __PERF_DRV_CONFIGS_H
-
-#include "drv_configs.h"
-#include "evlist.h"
-#include "evsel.h"
-
-int perf_evlist__apply_drv_configs(struct perf_evlist *evlist,
-				   struct perf_evsel **err_evsel,
-				   struct perf_evsel_config_term **term);
-#endif
tools/perf/util/pmu.h +0 -1
index 1c12a61ed0dc..47253c3daf55 100644
@@ -31,7 +31,6 @@ struct perf_pmu {
 	struct list_head format;  /* HEAD struct perf_pmu_format -> list */
 	struct list_head aliases; /* HEAD struct perf_pmu_alias -> list */
 	struct list_head list;    /* ELEM */
-	int (*set_drv_config)	(struct perf_evsel_config_term *term);
 };
 
 struct perf_pmu_info {
Signature · 1 line
2.20.1
author maintainer
#27 lore raw

PATCH 27/53 perf record: Allocate affinity masks

In reply to Arnaldo Carvalho de Melo

From: Alexey Budankov <[email protected]>

Allocate affinity option and masks for mmap data buffers and record thread as well as initialize allocated objects.

---
 tools/perf/builtin-record.c | 13 ++++++++++++-
 tools/perf/perf.h           |  8 ++++++++
 tools/perf/util/evlist.c    |  6 +++---
 tools/perf/util/evlist.h    |  2 +-
 tools/perf/util/mmap.c      |  2 ++
 tools/perf/util/mmap.h      |  3 ++-
 6 files changed, 28 insertions(+), 6 deletions(-)
tools/perf/builtin-record.c +12 -1
index 56e9d9e8c174..7ced5f3e8100 100644
@@ -81,12 +81,17 @@ struct record {
 	bool			timestamp_boundary;
 	struct switch_output	switch_output;
 	unsigned long long	samples;
+	cpu_set_t		affinity_mask;
 };
 
 static volatile int auxtrace_record__snapshot_started;
 static DEFINE_TRIGGER(auxtrace_snapshot_trigger);
 static DEFINE_TRIGGER(switch_output_trigger);
 
+static const char *affinity_tags[PERF_AFFINITY_MAX] = {
+	"SYS", "NODE", "CPU"
+};
+
 static bool switch_output_signal(struct record *rec)
 {
 	return rec->switch_output.signal &&
@@ -533,7 +538,8 @@ static int record__mmap_evlist(struct record *rec,
 
 	if (perf_evlist__mmap_ex(evlist, opts->mmap_pages,
 				 opts->auxtrace_mmap_pages,
-				 opts->auxtrace_snapshot_mode, opts->nr_cblocks) < 0) {
+				 opts->auxtrace_snapshot_mode,
+				 opts->nr_cblocks, opts->affinity) < 0) {
 		if (errno == EPERM) {
 			pr_err("Permission error mapping pages.\n"
 			       "Consider increasing "
@@ -1977,6 +1983,9 @@ int cmd_record(int argc, const char **argv)
 # undef REASON
 #endif
 
+	CPU_ZERO(&rec->affinity_mask);
+	rec->opts.affinity = PERF_AFFINITY_SYS;
+
 	rec->evlist = perf_evlist__new();
 	if (rec->evlist == NULL)
 		return -ENOMEM;
@@ -2140,6 +2149,8 @@ int cmd_record(int argc, const char **argv)
 	if (verbose > 0)
 		pr_info("nr_cblocks: %d\n", rec->opts.nr_cblocks);
 
+	pr_debug("affinity: %s\n", affinity_tags[rec->opts.affinity]);
+
 	err = __cmd_record(&record, argc, argv);
 out:
 	perf_evlist__delete(rec->evlist);
tools/perf/perf.h +8 -0
index 5941fb6eccfc..b120e547ddc7 100644
@@ -84,6 +84,14 @@ struct record_opts {
 	clockid_t    clockid;
 	u64          clockid_res_ns;
 	int	     nr_cblocks;
+	int	     affinity;
+};
+
+enum perf_affinity {
+	PERF_AFFINITY_SYS = 0,
+	PERF_AFFINITY_NODE,
+	PERF_AFFINITY_CPU,
+	PERF_AFFINITY_MAX
 };
 
 struct option;
tools/perf/util/evlist.c +3 -3
index 8c902276d4b4..08cedb643ea6 100644
@@ -1022,7 +1022,7 @@ int perf_evlist__parse_mmap_pages(const struct option *opt, const char *str,
  */
 int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages,
 			 unsigned int auxtrace_pages,
-			 bool auxtrace_overwrite, int nr_cblocks)
+			 bool auxtrace_overwrite, int nr_cblocks, int affinity)
 {
 	struct perf_evsel *evsel;
 	const struct cpu_map *cpus = evlist->cpus;
@@ -1032,7 +1032,7 @@ int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages,
 	 * Its value is decided by evsel's write_backward.
 	 * So &mp should not be passed through const pointer.
 	 */
-	struct mmap_params mp = { .nr_cblocks = nr_cblocks };
+	struct mmap_params mp = { .nr_cblocks = nr_cblocks, .affinity = affinity };
 
 	if (!evlist->mmap)
 		evlist->mmap = perf_evlist__alloc_mmap(evlist, false);
@@ -1064,7 +1064,7 @@ int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages,
 
 int perf_evlist__mmap(struct perf_evlist *evlist, unsigned int pages)
 {
-	return perf_evlist__mmap_ex(evlist, pages, 0, false, 0);
+	return perf_evlist__mmap_ex(evlist, pages, 0, false, 0, PERF_AFFINITY_SYS);
 }
 
 int perf_evlist__create_maps(struct perf_evlist *evlist, struct target *target)
tools/perf/util/evlist.h +1 -1
index 00ab43c6dd15..744906dd4887 100644
@@ -165,7 +165,7 @@ unsigned long perf_event_mlock_kb_in_pages(void);
 
 int perf_evlist__mmap_ex(struct perf_evlist *evlist, unsigned int pages,
 			 unsigned int auxtrace_pages,
-			 bool auxtrace_overwrite, int nr_cblocks);
+			 bool auxtrace_overwrite, int nr_cblocks, int affinity);
 int perf_evlist__mmap(struct perf_evlist *evlist, unsigned int pages);
 void perf_evlist__munmap(struct perf_evlist *evlist);
 
tools/perf/util/mmap.c +2 -0
index 8fc39311a30d..e68ba754a8e2 100644
@@ -343,6 +343,8 @@ int perf_mmap__mmap(struct perf_mmap *map, struct mmap_params *mp, int fd, int c
 	map->fd = fd;
 	map->cpu = cpu;
 
+	CPU_ZERO(&map->affinity_mask);
+
 	if (auxtrace_mmap__mmap(&map->auxtrace_mmap,
 				&mp->auxtrace_mp, map->base, fd))
 		return -1;
tools/perf/util/mmap.h +2 -1
index aeb6942fdb00..e566c19b242b 100644
@@ -38,6 +38,7 @@ struct perf_mmap {
 		int		 nr_cblocks;
 	} aio;
 #endif
+	cpu_set_t	affinity_mask;
 };
 
 /*
@@ -69,7 +70,7 @@ enum bkw_mmap_state {
 };
 
 struct mmap_params {
-	int			    prot, mask, nr_cblocks;
+	int			    prot, mask, nr_cblocks, affinity;
 	struct auxtrace_mmap_params auxtrace_mp;
 };
 
Signature · 1 line
2.20.1
author maintainer
#28 lore raw

PATCH 28/53 perf record: Bind the AIO user space buffers to nodes

In reply to Arnaldo Carvalho de Melo

From: Alexey Budankov <[email protected]>

Allocate and bind AIO user space buffers to the memory nodes that mmap kernel buffers are bound to.

Cc Alexander Shishkin <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
[ Do not use 'index' as a variable name, it is a define in older glibcs ]
[ Add -lnuma to the python build when -DHAVE_LIBNUMA_SUPPORT is present, fixing 'perf test python' ]
---
 tools/perf/util/mmap.c   | 77 +++++++++++++++++++++++++++++++++++++---
 tools/perf/util/setup.py |  5 +++
 2 files changed, 78 insertions(+), 4 deletions(-)
tools/perf/util/mmap.c +73 -4
index e68ba754a8e2..d882f43148c3 100644
@@ -10,6 +10,9 @@
 #include <sys/mman.h>
 #include <inttypes.h>
 #include <asm/bug.h>
+#ifdef HAVE_LIBNUMA_SUPPORT
+#include <numaif.h>
+#endif
 #include "debug.h"
 #include "event.h"
 #include "mmap.h"
@@ -154,9 +157,72 @@ void __weak auxtrace_mmap_params__set_idx(struct auxtrace_mmap_params *mp __mayb
 }
 
 #ifdef HAVE_AIO_SUPPORT
+
+#ifdef HAVE_LIBNUMA_SUPPORT
+static int perf_mmap__aio_alloc(struct perf_mmap *map, int idx)
+{
+	map->aio.data[idx] = mmap(NULL, perf_mmap__mmap_len(map), PROT_READ|PROT_WRITE,
+				  MAP_PRIVATE|MAP_ANONYMOUS, 0, 0);
+	if (map->aio.data[idx] == MAP_FAILED) {
+		map->aio.data[idx] = NULL;
+		return -1;
+	}
+
+	return 0;
+}
+
+static void perf_mmap__aio_free(struct perf_mmap *map, int idx)
+{
+	if (map->aio.data[idx]) {
+		munmap(map->aio.data[idx], perf_mmap__mmap_len(map));
+		map->aio.data[idx] = NULL;
+	}
+}
+
+static int perf_mmap__aio_bind(struct perf_mmap *map, int idx, int cpu, int affinity)
+{
+	void *data;
+	size_t mmap_len;
+	unsigned long node_mask;
+
+	if (affinity != PERF_AFFINITY_SYS && cpu__max_node() > 1) {
+		data = map->aio.data[idx];
+		mmap_len = perf_mmap__mmap_len(map);
+		node_mask = 1UL << cpu__get_node(cpu);
+		if (mbind(data, mmap_len, MPOL_BIND, &node_mask, 1, 0)) {
+			pr_err("Failed to bind [%p-%p] AIO buffer to node %d: error %m\n",
+				data, data + mmap_len, cpu__get_node(cpu));
+			return -1;
+		}
+	}
+
+	return 0;
+}
+#else
+static int perf_mmap__aio_alloc(struct perf_mmap *map, int idx)
+{
+	map->aio.data[idx] = malloc(perf_mmap__mmap_len(map));
+	if (map->aio.data[idx] == NULL)
+		return -1;
+
+	return 0;
+}
+
+static void perf_mmap__aio_free(struct perf_mmap *map, int idx)
+{
+	zfree(&(map->aio.data[idx]));
+}
+
+static int perf_mmap__aio_bind(struct perf_mmap *map __maybe_unused, int idx __maybe_unused,
+		int cpu __maybe_unused, int affinity __maybe_unused)
+{
+	return 0;
+}
+#endif
+
 static int perf_mmap__aio_mmap(struct perf_mmap *map, struct mmap_params *mp)
 {
-	int delta_max, i, prio;
+	int delta_max, i, prio, ret;
 
 	map->aio.nr_cblocks = mp->nr_cblocks;
 	if (map->aio.nr_cblocks) {
@@ -177,11 +243,14 @@ static int perf_mmap__aio_mmap(struct perf_mmap *map, struct mmap_params *mp)
 		}
 		delta_max = sysconf(_SC_AIO_PRIO_DELTA_MAX);
 		for (i = 0; i < map->aio.nr_cblocks; ++i) {
-			map->aio.data[i] = malloc(perf_mmap__mmap_len(map));
-			if (!map->aio.data[i]) {
+			ret = perf_mmap__aio_alloc(map, i);
+			if (ret == -1) {
 				pr_debug2("failed to allocate data buffer area, error %m");
 				return -1;
 			}
+			ret = perf_mmap__aio_bind(map, i, map->cpu, mp->affinity);
+			if (ret == -1)
+				return -1;
 			/*
 			 * Use cblock.aio_fildes value different from -1
 			 * to denote started aio write operation on the
@@ -210,7 +279,7 @@ static void perf_mmap__aio_munmap(struct perf_mmap *map)
 	int i;
 
 	for (i = 0; i < map->aio.nr_cblocks; ++i)
-		zfree(&map->aio.data[i]);
+		perf_mmap__aio_free(map, i);
 	if (map->aio.data)
 		zfree(&map->aio.data);
 	zfree(&map->aio.cblocks);
tools/perf/util/setup.py +5 -0
index d3ffc18424b5..5b5a167b43ce 100644
@@ -53,9 +53,14 @@ ext_sources = [f.strip() for f in open('util/python-ext-sources')
 # use full paths with source files
 ext_sources = list(map(lambda x: '%s/%s' % (src_perf, x) , ext_sources))
 
+extra_libraries = []
+if '-DHAVE_LIBNUMA_SUPPORT' in cflags:
+    extra_libraries = [ 'numa' ]
+
 perf = Extension('perf',
 		  sources = ext_sources,
 		  include_dirs = ['util/include'],
+		  libraries = extra_libraries,
 		  extra_compile_args = cflags,
 		  extra_objects = [libtraceevent, libapikfs],
                  )
Signature · 1 line
2.20.1
author maintainer
#29 lore raw

PATCH 29/53 perf tools: Add fallback versions for CPU_{OR,EQUAL}()

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

From the glibc sources, so that we can keep the tooling buildable in older systems while using recent sched.h CPU_ macros.

Cc Adrian Hunter <[email protected]>
Cc Alexander Shishkin <[email protected]>
Cc Alexey Budankov <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Jiri Olsa <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
---
 tools/perf/util/cpu-set-sched.h | 50 +++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 tools/perf/util/cpu-set-sched.h
tools/perf/util/cpu-set-sched.h new file +50 -0
new file mode 100644
index 000000000000..8cf4e40d322a
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: LGPL-2.1
+// Definitions taken from glibc for use with older systems, same licensing.
+#ifndef _CPU_SET_SCHED_PERF_H
+#define _CPU_SET_SCHED_PERF_H
+
+#include <features.h>
+#include <sched.h>
+
+#ifndef CPU_EQUAL
+#ifndef __CPU_EQUAL_S
+#if __GNUC_PREREQ (2, 91)
+# define __CPU_EQUAL_S(setsize, cpusetp1, cpusetp2) \
+  (__builtin_memcmp (cpusetp1, cpusetp2, setsize) == 0)
+#else
+# define __CPU_EQUAL_S(setsize, cpusetp1, cpusetp2) \
+  (__extension__							      \
+   ({ const __cpu_mask *__arr1 = (cpusetp1)->__bits;			      \
+      const __cpu_mask *__arr2 = (cpusetp2)->__bits;			      \
+      size_t __imax = (setsize) / sizeof (__cpu_mask);			      \
+      size_t __i;							      \
+      for (__i = 0; __i < __imax; ++__i)				      \
+	if (__arr1[__i] != __arr2[__i])					      \
+	  break;							      \
+      __i == __imax; }))
+#endif
+#endif // __CPU_EQUAL_S
+
+#define CPU_EQUAL(cpusetp1, cpusetp2) \
+  __CPU_EQUAL_S (sizeof (cpu_set_t), cpusetp1, cpusetp2)
+#endif // CPU_EQUAL
+
+#ifndef CPU_OR
+#ifndef __CPU_OP_S
+#define __CPU_OP_S(setsize, destset, srcset1, srcset2, op) \
+  (__extension__							      \
+   ({ cpu_set_t *__dest = (destset);					      \
+      const __cpu_mask *__arr1 = (srcset1)->__bits;			      \
+      const __cpu_mask *__arr2 = (srcset2)->__bits;			      \
+      size_t __imax = (setsize) / sizeof (__cpu_mask);			      \
+      size_t __i;							      \
+      for (__i = 0; __i < __imax; ++__i)				      \
+	((__cpu_mask *) __dest->__bits)[__i] = __arr1[__i] op __arr2[__i];    \
+      __dest; }))
+#endif // __CPU_OP_S
+
+#define CPU_OR(destset, srcset1, srcset2) \
+  __CPU_OP_S (sizeof (cpu_set_t), destset, srcset1, srcset2, |)
+#endif // CPU_OR
+
+#endif // _CPU_SET_SCHED_PERF_H
Signature · 1 line
2.20.1
author maintainer
#30 lore raw

PATCH 30/53 perf record: Apply affinity masks when reading mmap buffers

In reply to Arnaldo Carvalho de Melo

From: Alexey Budankov <[email protected]>

Build node cpu masks for mmap data buffers. Apply node cpu masks to tool thread every time it references data buffers cross node or cross cpu.

Cc Alexander Shishkin <[email protected]>
Cc Andi Kleen <[email protected]>
Cc Namhyung Kim <[email protected]>
Cc Peter Zijlstra <[email protected]>
[ Use cpu-set-sched.h to get the CPU_{EQUAL,OR}() fallbacks for older systems ]
---
 tools/perf/builtin-record.c | 15 +++++++++++++++
 tools/perf/util/cpumap.c    | 10 ++++++++++
 tools/perf/util/cpumap.h    |  1 +
 tools/perf/util/mmap.c      | 28 +++++++++++++++++++++++++++-
 4 files changed, 53 insertions(+), 1 deletion(-)
tools/perf/builtin-record.c +15 -0
index 7ced5f3e8100..3fdfbaebd95e 100644
@@ -38,6 +38,7 @@
 #include "util/bpf-loader.h"
 #include "util/trigger.h"
 #include "util/perf-hooks.h"
+#include "util/cpu-set-sched.h"
 #include "util/time-utils.h"
 #include "util/units.h"
 #include "util/bpf-event.h"
@@ -536,6 +537,9 @@ static int record__mmap_evlist(struct record *rec,
 	struct record_opts *opts = &rec->opts;
 	char msg[512];
 
+	if (opts->affinity != PERF_AFFINITY_SYS)
+		cpu__setup_cpunode_map();
+
 	if (perf_evlist__mmap_ex(evlist, opts->mmap_pages,
 				 opts->auxtrace_mmap_pages,
 				 opts->auxtrace_snapshot_mode,
@@ -719,6 +723,16 @@ static struct perf_event_header finished_round_event = {
 	.type = PERF_RECORD_FINISHED_ROUND,
 };
 
+static void record__adjust_affinity(struct record *rec, struct perf_mmap *map)
+{
+	if (rec->opts.affinity != PERF_AFFINITY_SYS &&
+	    !CPU_EQUAL(&rec->affinity_mask, &map->affinity_mask)) {
+		CPU_ZERO(&rec->affinity_mask);
+		CPU_OR(&rec->affinity_mask, &rec->affinity_mask, &map->affinity_mask);
+		sched_setaffinity(0, sizeof(rec->affinity_mask), &rec->affinity_mask);
+	}
+}
+
 static int record__mmap_read_evlist(struct record *rec, struct perf_evlist *evlist,
 				    bool overwrite)
 {
@@ -746,6 +760,7 @@ static int record__mmap_read_evlist(struct record *rec, struct perf_evlist *evli
 		struct perf_mmap *map = &maps[i];
 
 		if (map->base) {
+			record__adjust_affinity(rec, map);
 			if (!record__aio_enabled(rec)) {
 				if (perf_mmap__push(map, rec, record__pushfn) != 0) {
 					rc = -1;
tools/perf/util/cpumap.c +10 -0
index 383674f448fc..0bbc3feb0894 100644
@@ -730,3 +730,13 @@ size_t cpu_map__snprint_mask(struct cpu_map *map, char *buf, size_t size)
 	buf[size - 1] = '\0';
 	return ptr - buf;
 }
+
+const struct cpu_map *cpu_map__online(void) /* thread unsafe */
+{
+	static const struct cpu_map *online = NULL;
+
+	if (!online)
+		online = cpu_map__new(NULL); /* from /sys/devices/system/cpu/online */
+
+	return online;
+}
tools/perf/util/cpumap.h +1 -0
index ed8999d1a640..f00ce624b9f7 100644
@@ -29,6 +29,7 @@ int cpu_map__get_core_id(int cpu);
 int cpu_map__get_core(struct cpu_map *map, int idx, void *data);
 int cpu_map__build_socket_map(struct cpu_map *cpus, struct cpu_map **sockp);
 int cpu_map__build_core_map(struct cpu_map *cpus, struct cpu_map **corep);
+const struct cpu_map *cpu_map__online(void); /* thread unsafe */
 
 struct cpu_map *cpu_map__get(struct cpu_map *map);
 void cpu_map__put(struct cpu_map *map);
tools/perf/util/mmap.c +27 -1
index d882f43148c3..cdc7740fc181 100644
@@ -383,6 +383,32 @@ void perf_mmap__munmap(struct perf_mmap *map)
 	auxtrace_mmap__munmap(&map->auxtrace_mmap);
 }
 
+static void build_node_mask(int node, cpu_set_t *mask)
+{
+	int c, cpu, nr_cpus;
+	const struct cpu_map *cpu_map = NULL;
+
+	cpu_map = cpu_map__online();
+	if (!cpu_map)
+		return;
+
+	nr_cpus = cpu_map__nr(cpu_map);
+	for (c = 0; c < nr_cpus; c++) {
+		cpu = cpu_map->map[c]; /* map c index to online cpu index */
+		if (cpu__get_node(cpu) == node)
+			CPU_SET(cpu, mask);
+	}
+}
+
+static void perf_mmap__setup_affinity_mask(struct perf_mmap *map, struct mmap_params *mp)
+{
+	CPU_ZERO(&map->affinity_mask);
+	if (mp->affinity == PERF_AFFINITY_NODE && cpu__max_node() > 1)
+		build_node_mask(cpu__get_node(map->cpu), &map->affinity_mask);
+	else if (mp->affinity == PERF_AFFINITY_CPU)
+		CPU_SET(map->cpu, &map->affinity_mask);
+}
+
 int perf_mmap__mmap(struct perf_mmap *map, struct mmap_params *mp, int fd, int cpu)
 {
 	/*
@@ -412,7 +438,7 @@ int perf_mmap__mmap(struct perf_mmap *map, struct mmap_params *mp, int fd, int c
 	map->fd = fd;
 	map->cpu = cpu;
 
-	CPU_ZERO(&map->affinity_mask);
+	perf_mmap__setup_affinity_mask(map, mp);
 
 	if (auxtrace_mmap__mmap(&map->auxtrace_mmap,
 				&mp->auxtrace_mp, map->base, fd))
Signature · 1 line
2.20.1
author maintainer
#31 lore raw

PATCH 31/53 perf clang: Do not use 'return std::move(something)'

In reply to Arnaldo Carvalho de Melo

From: Arnaldo Carvalho de Melo <[email protected]>

It prevents copy elision, generating this warning when building with fedora:rawhide's clang:

clang version 7.0.1 (Fedora 7.0.1-2.fc30)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /usr/bin
Found candidate GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9 Found candidate GCC installation: /usr/lib/gcc/x86_64-redhat-linux/9 Selected GCC installation: /usr/bin/../lib/gcc/x86_64-redhat-linux/9 Candidate multilib: .;@m64
Candidate multilib: 32;@m32
Selected multilib: .;@m64

  $ make -C tools/perf CC=clang LIBCLANGLLVM=1
  <SNIP>
  util/c++/clang.cpp: In function 'std::unique_ptr<llvm::SmallVectorImpl<char> > perf::getBPFObjectFromModule(llvm::Module*)':
  util/c++/clang.cpp:163:18: error: moving a local object in a return statement prevents copy elision [-Werror=pessimizing-move]
    163 |  return std::move(Buffer);
        |         ~~~~~~~~~^~~~~~~~
  util/c++/clang.cpp:163:18: note: remove 'std::move' call
  cc1plus: all warnings being treated as errors
  <SNIP>

References:

http://www.cplusplus.com/forum/general/186411/#msg908572
https://en.cppreference.com/w/cpp/language/return#Notes
https://en.cppreference.com/w/cpp/language/copy_elision

---
 tools/perf/util/c++/clang.cpp | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/c++/clang.cpp +1 -1
index 89512504551b..39c0004f2886 100644
@@ -160,7 +160,7 @@ getBPFObjectFromModule(llvm::Module *Module)
 	}
 	PM.run(*Module);
 
-	return std::move(Buffer);
+	return Buffer;
 }
 
 }
Signature · 1 line
2.20.1
author maintainer
#32 lore raw

PATCH 32/53 perf hists: Add argument to hists__resort_cb_t callback

In reply to Arnaldo Carvalho de Melo

From: Jiri Olsa <[email protected]>

Add argument to hists__resort_cb_t so that we can pass data from upper layers to the callback function. It will be used in the following patches.

---
 tools/perf/builtin-c2c.c |  8 ++++----
 tools/perf/util/hist.c   | 11 ++++++-----
 tools/perf/util/hist.h   |  2 +-
 3 files changed, 11 insertions(+), 10 deletions(-)
tools/perf/builtin-c2c.c +4 -4
index b2bf117881f1..efaaab23c6fd 100644
@@ -1970,7 +1970,7 @@ static void calc_width(struct c2c_hist_entry *c2c_he)
 	set_nodestr(c2c_he);
 }
 
-static int filter_cb(struct hist_entry *he)
+static int filter_cb(struct hist_entry *he, void *arg __maybe_unused)
 {
 	struct c2c_hist_entry *c2c_he;
 
@@ -1987,7 +1987,7 @@ static int filter_cb(struct hist_entry *he)
 	return 0;
 }
 
-static int resort_cl_cb(struct hist_entry *he)
+static int resort_cl_cb(struct hist_entry *he, void *arg __maybe_unused)
 {
 	struct c2c_hist_entry *c2c_he;
 	struct c2c_hists *c2c_hists;
@@ -2074,7 +2074,7 @@ static int setup_nodes(struct perf_session *session)
 
 #define HAS_HITMS(__h) ((__h)->stats.lcl_hitm || (__h)->stats.rmt_hitm)
 
-static int resort_hitm_cb(struct hist_entry *he)
+static int resort_hitm_cb(struct hist_entry *he, void *arg __maybe_unused)
 {
 	struct c2c_hist_entry *c2c_he;
 	c2c_he = container_of(he, struct c2c_hist_entry, he);
@@ -2096,7 +2096,7 @@ static int hists__iterate_cb(struct hists *hists, hists__resort_cb_t cb)
 		struct hist_entry *he;
 
 		he = rb_entry(next, struct hist_entry, rb_node);
-		ret = cb(he);
+		ret = cb(he, NULL);
 		if (ret)
 			break;
 		next = rb_next(&he->rb_node);
tools/perf/util/hist.c +6 -5
index 7f9df74ab893..64ad603a0592 100644
@@ -1721,7 +1721,8 @@ static void __hists__insert_output_entry(struct rb_root_cached *entries,
 }
 
 static void output_resort(struct hists *hists, struct ui_progress *prog,
-			  bool use_callchain, hists__resort_cb_t cb)
+			  bool use_callchain, hists__resort_cb_t cb,
+			  void *cb_arg)
 {
 	struct rb_root_cached *root;
 	struct rb_node *next;
@@ -1760,7 +1761,7 @@ static void output_resort(struct hists *hists, struct ui_progress *prog,
 		n = rb_entry(next, struct hist_entry, rb_node_in);
 		next = rb_next(&n->rb_node_in);
 
-		if (cb && cb(n))
+		if (cb && cb(n, cb_arg))
 			continue;
 
 		__hists__insert_output_entry(&hists->entries, n, min_callchain_hits, use_callchain);
@@ -1785,18 +1786,18 @@ void perf_evsel__output_resort(struct perf_evsel *evsel, struct ui_progress *pro
 
 	use_callchain |= symbol_conf.show_branchflag_count;
 
-	output_resort(evsel__hists(evsel), prog, use_callchain, NULL);
+	output_resort(evsel__hists(evsel), prog, use_callchain, NULL, NULL);
 }
 
 void hists__output_resort(struct hists *hists, struct ui_progress *prog)
 {
-	output_resort(hists, prog, symbol_conf.use_callchain, NULL);
+	output_resort(hists, prog, symbol_conf.use_callchain, NULL, NULL);
 }
 
 void hists__output_resort_cb(struct hists *hists, struct ui_progress *prog,
 			     hists__resort_cb_t cb)
 {
-	output_resort(hists, prog, symbol_conf.use_callchain, cb);
+	output_resort(hists, prog, symbol_conf.use_callchain, cb, NULL);
 }
 
 static bool can_goto_child(struct hist_entry *he, enum hierarchy_move_dir hmd)
tools/perf/util/hist.h +1 -1
index 6b872079ead5..69a367d4aeaf 100644
@@ -163,7 +163,7 @@ int hist_entry__snprintf_alignment(struct hist_entry *he, struct perf_hpp *hpp,
 				   struct perf_hpp_fmt *fmt, int printed);
 void hist_entry__delete(struct hist_entry *he);
 
-typedef int (*hists__resort_cb_t)(struct hist_entry *he);
+typedef int (*hists__resort_cb_t)(struct hist_entry *he, void *arg);
 
 void perf_evsel__output_resort(struct perf_evsel *evsel, struct ui_progress *prog);
 void hists__output_resort(struct hists *hists, struct ui_progress *prog);
Signature · 1 line
2.20.1
author maintainer
#33 lore raw

PATCH 33/53 perf evsel: Add output_resort_cb method

In reply to Arnaldo Carvalho de Melo

From: Jiri Olsa <[email protected]>

Add perf_evsel__output_resort_cb() so we have an interface with a callback for each hist entry. It will be used in the following patch.

---
 tools/perf/util/hist.c | 10 ++++++++--
 tools/perf/util/hist.h |  2 ++
 2 files changed, 10 insertions(+), 2 deletions(-)
tools/perf/util/hist.c +8 -2
index 64ad603a0592..669f961316f0 100644
@@ -1775,7 +1775,8 @@ static void output_resort(struct hists *hists, struct ui_progress *prog,
 	}
 }
 
-void perf_evsel__output_resort(struct perf_evsel *evsel, struct ui_progress *prog)
+void perf_evsel__output_resort_cb(struct perf_evsel *evsel, struct ui_progress *prog,
+				  hists__resort_cb_t cb, void *cb_arg)
 {
 	bool use_callchain;
 
@@ -1786,7 +1787,12 @@ void perf_evsel__output_resort(struct perf_evsel *evsel, struct ui_progress *pro
 
 	use_callchain |= symbol_conf.show_branchflag_count;
 
-	output_resort(evsel__hists(evsel), prog, use_callchain, NULL, NULL);
+	output_resort(evsel__hists(evsel), prog, use_callchain, cb, cb_arg);
+}
+
+void perf_evsel__output_resort(struct perf_evsel *evsel, struct ui_progress *prog)
+{
+	return perf_evsel__output_resort_cb(evsel, prog, NULL, NULL);
 }
 
 void hists__output_resort(struct hists *hists, struct ui_progress *prog)
tools/perf/util/hist.h +2 -0
index 69a367d4aeaf..4af27fbab24f 100644
@@ -165,6 +165,8 @@ void hist_entry__delete(struct hist_entry *he);
 
 typedef int (*hists__resort_cb_t)(struct hist_entry *he, void *arg);
 
+void perf_evsel__output_resort_cb(struct perf_evsel *evsel, struct ui_progress *prog,
+				  hists__resort_cb_t cb, void *cb_arg);
 void perf_evsel__output_resort(struct perf_evsel *evsel, struct ui_progress *prog);
 void hists__output_resort(struct hists *hists, struct ui_progress *prog);
 void hists__output_resort_cb(struct hists *hists, struct ui_progress *prog,
Signature · 1 line
2.20.1
author maintainer
#34 lore raw

PATCH 34/53 perf report: Move symbol annotation to the resort phase

In reply to Arnaldo Carvalho de Melo

From: Jiri Olsa <[email protected]>

Currently we make the annotation for the IPC column during the entry display, already outside of the progress bar scope, so it appears like 'perf report' is stuck.

Move the annotation retrieval to the resort phase, so that all the data are ready for display.

---
 tools/perf/builtin-report.c | 21 +++++++++++++++++++--
 tools/perf/util/sort.c      |  7 -------
 2 files changed, 19 insertions(+), 9 deletions(-)
tools/perf/builtin-report.c +19 -2
index a007ea9a3874..2e8c74d6430c 100644
@@ -616,6 +616,21 @@ static int report__collapse_hists(struct report *rep)
 	return ret;
 }
 
+static int hists__resort_cb(struct hist_entry *he, void *arg)
+{
+	struct report *rep = arg;
+	struct symbol *sym = he->ms.sym;
+
+	if (rep->symbol_ipc && sym && !sym->annotate2) {
+		struct perf_evsel *evsel = hists_to_evsel(he->hists);
+
+		symbol__annotate2(sym, he->ms.map, evsel,
+				  &annotation__default_options, NULL);
+	}
+
+	return 0;
+}
+
 static void report__output_resort(struct report *rep)
 {
 	struct ui_progress prog;
@@ -623,8 +638,10 @@ static void report__output_resort(struct report *rep)
 
 	ui_progress__init(&prog, rep->nr_entries, "Sorting events for output...");
 
-	evlist__for_each_entry(rep->session->evlist, pos)
-		perf_evsel__output_resort(pos, &prog);
+	evlist__for_each_entry(rep->session->evlist, pos) {
+		perf_evsel__output_resort_cb(pos, &prog,
+					     hists__resort_cb, rep);
+	}
 
 	ui_progress__finish();
 }
tools/perf/util/sort.c +0 -7
index 79e794406bef..2b6c1ccb878c 100644
@@ -429,8 +429,6 @@ static int hist_entry__sym_ipc_snprintf(struct hist_entry *he, char *bf,
 {
 
 	struct symbol *sym = he->ms.sym;
-	struct map *map = he->ms.map;
-	struct perf_evsel *evsel = hists_to_evsel(he->hists);
 	struct annotation *notes;
 	double ipc = 0.0, coverage = 0.0;
 	char tmp[64];
@@ -438,11 +436,6 @@ static int hist_entry__sym_ipc_snprintf(struct hist_entry *he, char *bf,
 	if (!sym)
 		return repsep_snprintf(bf, size, "%-*s", width, "-");
 
-	if (!sym->annotate2 && symbol__annotate2(sym, map, evsel,
-		&annotation__default_options, NULL) < 0) {
-		return 0;
-	}
-
 	notes = symbol__annotation(sym);
 
 	if (notes->hit_cycles)
Signature · 1 line
2.20.1
author maintainer
#35 lore raw

PATCH 35/53 perf tools: Add documentation for BPF event selection

In reply to Arnaldo Carvalho de Melo

From: Changbin Du <[email protected]>

Add documentation for how to pass a BPF program as a perf event.

---
 tools/perf/Documentation/perf-config.txt | 31 ++++++++++++++++++++++++
 tools/perf/Documentation/perf-record.txt | 14 +++++++++++
 2 files changed, 45 insertions(+)
tools/perf/Documentation/perf-config.txt +31 -0
index 4ac7775fbc11..86f3dcc15f83 100644
@@ -120,6 +120,10 @@ Given a $HOME/.perfconfig like this:
 		children = true
 		group = true
 
+	[llvm]
+		dump-obj = true
+		clang-opt = -g
+
 You can hide source code of annotate feature setting the config to false with
 
 	% perf config annotate.hide_src_code=true
@@ -553,6 +557,33 @@ trace.*::
 	trace.show_zeros::
 		Do not suppress syscall arguments that are equal to zero.
 
+llvm.*::
+	llvm.clang-path::
+		Path to clang. If omit, search it from $PATH.
+
+	llvm.clang-bpf-cmd-template::
+		Cmdline template. Below lines show its default value. Environment
+		variable is used to pass options.
+		"$CLANG_EXEC -D__KERNEL__ $CLANG_OPTIONS $KERNEL_INC_OPTIONS \
+		-Wno-unused-value -Wno-pointer-sign -working-directory \
+		$WORKING_DIR  -c $CLANG_SOURCE -target bpf -O2 -o -"
+
+	llvm.clang-opt::
+		Options passed to clang.
+
+	llvm.kbuild-dir::
+		kbuild directory. If not set, use /lib/modules/`uname -r`/build.
+		If set to "" deliberately, skip kernel header auto-detector.
+
+	llvm.kbuild-opts::
+		Options passed to 'make' when detecting kernel header options.
+
+	llvm.dump-obj::
+		Enable perf dump BPF object files compiled by LLVM.
+
+	llvm.opts::
+		Options passed to llc.
+
 SEE ALSO
 --------
 linkperf:perf[1]
tools/perf/Documentation/perf-record.txt +14 -0
index d232b13ea713..02b4aa2621e7 100644
@@ -88,6 +88,20 @@ OPTIONS
           If you want to profile write accesses in [0x1000~1008), just set
           'mem:0x1000/8:w'.
 
+        - a BPF source file (ending in .c) or a precompiled object file (ending
+          in .o) selects one or more BPF events.
+          The BPF program can attach to various perf events based on the ELF section
+          names.
+
+          When processing a '.c' file, perf searches an installed LLVM to compile it
+          into an object file first. Optional clang options can be passed via the
+          '--clang-opt' command line option, e.g.:
+
+            perf record --clang-opt "-DLINUX_VERSION_CODE=0x50000" \
+                        -e tests/bpf-script-example.c
+
+          Note: '--clang-opt' must be placed before '--event/-e'.
+
 	- a group of events surrounded by a pair of brace ("{event1,event2,...}").
 	  Each event is separated by commas and the group should be quoted to
 	  prevent the shell interpretation.  You also need to use --group on
Signature · 1 line
2.20.1
author maintainer
#36 lore raw

PATCH 36/53 perf cs-etm: Add last instruction information in packet

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

Decoder provides last instruction related information, these information can be used for trace analysis; specifically we can get to know what kind of branch instruction has been executed, mainly the information are contained in three element fields:

last_i_type: this is significant type for waypoint calculation, it indicates the last instruction is one of immediate branch instruction, indirect branch instruction, instruction barrier (ISB), or data barrier (DSB/DMB).

last_i_subtype: this is used for instruction sub type, it can be branch with link, ARMv8 return instruction, ARMv8 eret instruction (return from exception), or ARMv7 instruction which could imply return (e.g. MOV PC, LR; POP { ,PC}).

last_instr_cond: it indicates if the last instruction was conditional.

But these three fields are not saved into cs_etm_packet struct, thus cs-etm layer don't know related information and cannot generate sample flags for branch instructions.

This patch add corresponding three new fields in cs_etm_packet struct and save related value into the packet structure, it is preparation for supporting sample flags.

---
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 9 +++++++++
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 3 +++
 2 files changed, 12 insertions(+)
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +9 -0
index 8c155575c6c5..8a19310500d9 100644
@@ -290,6 +290,9 @@ static void cs_etm_decoder__clear_buffer(struct cs_etm_decoder *decoder)
 		decoder->packet_buffer[i].instr_count = 0;
 		decoder->packet_buffer[i].last_instr_taken_branch = false;
 		decoder->packet_buffer[i].last_instr_size = 0;
+		decoder->packet_buffer[i].last_instr_type = 0;
+		decoder->packet_buffer[i].last_instr_subtype = 0;
+		decoder->packet_buffer[i].last_instr_cond = 0;
 		decoder->packet_buffer[i].cpu = INT_MIN;
 	}
 }
@@ -323,6 +326,9 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder,
 	decoder->packet_buffer[et].instr_count = 0;
 	decoder->packet_buffer[et].last_instr_taken_branch = false;
 	decoder->packet_buffer[et].last_instr_size = 0;
+	decoder->packet_buffer[et].last_instr_type = 0;
+	decoder->packet_buffer[et].last_instr_subtype = 0;
+	decoder->packet_buffer[et].last_instr_cond = 0;
 
 	if (decoder->packet_count == MAX_BUFFER - 1)
 		return OCSD_RESP_WAIT;
@@ -366,6 +372,9 @@ cs_etm_decoder__buffer_range(struct cs_etm_decoder *decoder,
 	packet->start_addr = elem->st_addr;
 	packet->end_addr = elem->en_addr;
 	packet->instr_count = elem->num_instr_range;
+	packet->last_instr_type = elem->last_i_type;
+	packet->last_instr_subtype = elem->last_i_subtype;
+	packet->last_instr_cond = elem->last_instr_cond;
 
 	switch (elem->last_i_type) {
 	case OCSD_INSTR_BR:
tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +3 -0
index a6407d41598f..7cdd6a9c68a7 100644
@@ -43,6 +43,9 @@ struct cs_etm_packet {
 	u64 start_addr;
 	u64 end_addr;
 	u32 instr_count;
+	u32 last_instr_type;
+	u32 last_instr_subtype;
+	u8 last_instr_cond;
 	u8 last_instr_taken_branch;
 	u8 last_instr_size;
 	int cpu;
Signature · 1 line
2.20.1
author maintainer
#37 lore raw

PATCH 37/53 perf cs-etm: Set sample flags for instruction range packet

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

The perf sample data contains flags to indicate the hardware trace data is belonging to which type branch instruction, thus this can be used to print out the human readable string. Arm CoreSight ETM sample data is missed to set flags and it is always set to zeros, this results in perf tool skips to print string for instruction types.

This patch is to set branch instruction flags for instruction range packet.

---
 .../perf/util/cs-etm-decoder/cs-etm-decoder.c |  2 +
 .../perf/util/cs-etm-decoder/cs-etm-decoder.h |  1 +
 tools/perf/util/cs-etm.c                      | 90 ++++++++++++++++++-
 3 files changed, 91 insertions(+), 2 deletions(-)
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +2 -0
index 8a19310500d9..e98ee49a1527 100644
@@ -293,6 +293,7 @@ static void cs_etm_decoder__clear_buffer(struct cs_etm_decoder *decoder)
 		decoder->packet_buffer[i].last_instr_type = 0;
 		decoder->packet_buffer[i].last_instr_subtype = 0;
 		decoder->packet_buffer[i].last_instr_cond = 0;
+		decoder->packet_buffer[i].flags = 0;
 		decoder->packet_buffer[i].cpu = INT_MIN;
 	}
 }
@@ -329,6 +330,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder,
 	decoder->packet_buffer[et].last_instr_type = 0;
 	decoder->packet_buffer[et].last_instr_subtype = 0;
 	decoder->packet_buffer[et].last_instr_cond = 0;
+	decoder->packet_buffer[et].flags = 0;
 
 	if (decoder->packet_count == MAX_BUFFER - 1)
 		return OCSD_RESP_WAIT;
tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +1 -0
index 7cdd6a9c68a7..23600e57a215 100644
@@ -45,6 +45,7 @@ struct cs_etm_packet {
 	u32 instr_count;
 	u32 last_instr_type;
 	u32 last_instr_subtype;
+	u32 flags;
 	u8 last_instr_cond;
 	u8 last_instr_taken_branch;
 	u8 last_instr_size;
tools/perf/util/cs-etm.c +88 -2

120 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#38 lore raw

PATCH 38/53 perf cs-etm: Set sample flags for trace discontinuity

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

In the middle of trace stream, it might be interrupted thus the trace data is not continuous, the trace stream firstly is ended for previous trace block and restarted for next block.

To display related information for showing trace is restarted, this patch set sample flags for trace discontinuity:

- If one discontinuity packet is coming, append flag PERF_IP_FLAG_TRACE_END to the previous packet to indicate the trace has been ended;
- If one instruction packet is following discontinuity packet, this instruction packet is the first one packet to restarting trace. So set flag PERF_IP_FLAG_TRACE_START to discontinuity packet, this flag will be used to generate sample when connect with the sequential instruction packet.

---
 tools/perf/util/cs-etm.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
tools/perf/util/cs-etm.c +19 -0
index d05cac5295f1..1aa29633ce77 100644
@@ -1111,6 +1111,7 @@ static int cs_etm__end_block(struct cs_etm_queue *etmq)
 static int cs_etm__set_sample_flags(struct cs_etm_queue *etmq)
 {
 	struct cs_etm_packet *packet = etmq->packet;
+	struct cs_etm_packet *prev_packet = etmq->prev_packet;
 
 	switch (packet->sample_type) {
 	case CS_ETM_RANGE:
@@ -1170,8 +1171,26 @@ static int cs_etm__set_sample_flags(struct cs_etm_queue *etmq)
 		    packet->last_instr_subtype == OCSD_S_INSTR_V8_RET)
 			packet->flags = PERF_IP_FLAG_BRANCH |
 					PERF_IP_FLAG_RETURN;
+
+		/*
+		 * Decoder might insert a discontinuity in the middle of
+		 * instruction packets, fixup prev_packet with flag
+		 * PERF_IP_FLAG_TRACE_BEGIN to indicate restarting trace.
+		 */
+		if (prev_packet->sample_type == CS_ETM_DISCONTINUITY)
+			prev_packet->flags |= PERF_IP_FLAG_BRANCH |
+					      PERF_IP_FLAG_TRACE_BEGIN;
 		break;
 	case CS_ETM_DISCONTINUITY:
+		/*
+		 * The trace is discontinuous, if the previous packet is
+		 * instruction packet, set flag PERF_IP_FLAG_TRACE_END
+		 * for previous packet.
+		 */
+		if (prev_packet->sample_type == CS_ETM_RANGE)
+			prev_packet->flags |= PERF_IP_FLAG_BRANCH |
+					      PERF_IP_FLAG_TRACE_END;
+		break;
 	case CS_ETM_EXCEPTION:
 	case CS_ETM_EXCEPTION_RET:
 	case CS_ETM_EMPTY:
Signature · 1 line
2.20.1
author maintainer
#39 lore raw

PATCH 39/53 perf cs-etm: Add exception number in exception packet

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

When an exception packet comes, it contains the information for exception number; the exception number indicates the exception types, so from it we can know if the exception is taken for interrupt, system call or other traps, etc.

This patch simply adds a field in cs_etm_packet struct, it records exception number for exception packet that will then be used to properly identify exception types to the perf synthesize mechanic.

---
 .../perf/util/cs-etm-decoder/cs-etm-decoder.c | 20 +++++++++++++++----
 .../perf/util/cs-etm-decoder/cs-etm-decoder.h |  1 +
 2 files changed, 17 insertions(+), 4 deletions(-)
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +16 -4
index e98ee49a1527..294efa76c9e3 100644
@@ -294,6 +294,7 @@ static void cs_etm_decoder__clear_buffer(struct cs_etm_decoder *decoder)
 		decoder->packet_buffer[i].last_instr_subtype = 0;
 		decoder->packet_buffer[i].last_instr_cond = 0;
 		decoder->packet_buffer[i].flags = 0;
+		decoder->packet_buffer[i].exception_number = UINT32_MAX;
 		decoder->packet_buffer[i].cpu = INT_MIN;
 	}
 }
@@ -331,6 +332,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder,
 	decoder->packet_buffer[et].last_instr_subtype = 0;
 	decoder->packet_buffer[et].last_instr_cond = 0;
 	decoder->packet_buffer[et].flags = 0;
+	decoder->packet_buffer[et].exception_number = UINT32_MAX;
 
 	if (decoder->packet_count == MAX_BUFFER - 1)
 		return OCSD_RESP_WAIT;
@@ -406,10 +408,20 @@ cs_etm_decoder__buffer_discontinuity(struct cs_etm_decoder *decoder,
 
 static ocsd_datapath_resp_t
 cs_etm_decoder__buffer_exception(struct cs_etm_decoder *decoder,
+				 const ocsd_generic_trace_elem *elem,
 				 const uint8_t trace_chan_id)
-{
-	return cs_etm_decoder__buffer_packet(decoder, trace_chan_id,
-					     CS_ETM_EXCEPTION);
+{	int ret = 0;
+	struct cs_etm_packet *packet;
+
+	ret = cs_etm_decoder__buffer_packet(decoder, trace_chan_id,
+					    CS_ETM_EXCEPTION);
+	if (ret != OCSD_RESP_CONT && ret != OCSD_RESP_WAIT)
+		return ret;
+
+	packet = &decoder->packet_buffer[decoder->tail];
+	packet->exception_number = elem->exception_number;
+
+	return ret;
 }
 
 static ocsd_datapath_resp_t
@@ -443,7 +455,7 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(
 						    trace_chan_id);
 		break;
 	case OCSD_GEN_TRC_ELEM_EXCEPTION:
-		resp = cs_etm_decoder__buffer_exception(decoder,
+		resp = cs_etm_decoder__buffer_exception(decoder, elem,
 							trace_chan_id);
 		break;
 	case OCSD_GEN_TRC_ELEM_EXCEPTION_RET:
tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +1 -0
index 23600e57a215..012b4728a46f 100644
@@ -46,6 +46,7 @@ struct cs_etm_packet {
 	u32 last_instr_type;
 	u32 last_instr_subtype;
 	u32 flags;
+	u32 exception_number;
 	u8 last_instr_cond;
 	u8 last_instr_taken_branch;
 	u8 last_instr_size;
Signature · 1 line
2.20.1
author maintainer
#40 lore raw

PATCH 40/53 perf cs-etm: Change tuple from traceID-CPU# to traceID-metadata

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

If packet processing wants to know the packet is bound with which ETM version, it needs to access metadata to decide that based on metadata magic number; but we cannot simply to use CPU logic ID number as index to access metadata sequential array, especially when system have hotplugged off CPUs, the metadata array are only allocated for online CPUs but not offline CPUs, so the CPU logic number doesn't match with its index in the array.

This patch is to change tuple from traceID-CPU# to traceID-metadata, thus it can use the tuple to retrieve metadata pointer according to traceID.

For safe accessing metadata fields, this patch provides helper function cs_etm__get_cpu() which is used to return CPU number according to traceID; cs_etm_decoder__buffer_packet() is the first consumer for this helper function.

---
 .../perf/util/cs-etm-decoder/cs-etm-decoder.c |  8 +++---
 tools/perf/util/cs-etm.c                      | 26 ++++++++++++++-----
 tools/perf/util/cs-etm.h                      |  9 ++++++-
 3 files changed, 31 insertions(+), 12 deletions(-)
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +3 -5
index 294efa76c9e3..cdd38ffd10d2 100644
@@ -305,14 +305,12 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder,
 			      enum cs_etm_sample_type sample_type)
 {
 	u32 et = 0;
-	struct int_node *inode = NULL;
+	int cpu;
 
 	if (decoder->packet_count >= MAX_BUFFER - 1)
 		return OCSD_RESP_FATAL_SYS_ERR;
 
-	/* Search the RB tree for the cpu associated with this traceID */
-	inode = intlist__find(traceid_list, trace_chan_id);
-	if (!inode)
+	if (cs_etm__get_cpu(trace_chan_id, &cpu) < 0)
 		return OCSD_RESP_FATAL_SYS_ERR;
 
 	et = decoder->tail;
@@ -322,7 +320,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder,
 
 	decoder->packet_buffer[et].sample_type = sample_type;
 	decoder->packet_buffer[et].isa = CS_ETM_ISA_UNKNOWN;
-	decoder->packet_buffer[et].cpu = *((int *)inode->priv);
+	decoder->packet_buffer[et].cpu = cpu;
 	decoder->packet_buffer[et].start_addr = CS_ETM_INVAL_ADDR;
 	decoder->packet_buffer[et].end_addr = CS_ETM_INVAL_ADDR;
 	decoder->packet_buffer[et].instr_count = 0;
tools/perf/util/cs-etm.c +20 -6
index 1aa29633ce77..a5497a761db7 100644
@@ -97,6 +97,20 @@ static u32 cs_etm__get_v7_protocol_version(u32 etmidr)
 	return CS_ETM_PROTO_ETMV3;
 }
 
+int cs_etm__get_cpu(u8 trace_chan_id, int *cpu)
+{
+	struct int_node *inode;
+	u64 *metadata;
+
+	inode = intlist__find(traceid_list, trace_chan_id);
+	if (!inode)
+		return -EINVAL;
+
+	metadata = inode->priv;
+	*cpu = (int)metadata[CS_ETM_CPU];
+	return 0;
+}
+
 static void cs_etm__packet_dump(const char *pkt_string)
 {
 	const char *color = PERF_COLOR_BLUE;
@@ -252,7 +266,7 @@ static void cs_etm__free(struct perf_session *session)
 	cs_etm__free_events(session);
 	session->auxtrace = NULL;
 
-	/* First remove all traceID/CPU# nodes for the RB tree */
+	/* First remove all traceID/metadata nodes for the RB tree */
 	intlist__for_each_entry_safe(inode, tmp, traceid_list)
 		intlist__remove(traceid_list, inode);
 	/* Then the RB tree itself */
@@ -1519,9 +1533,9 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
 				    0xffffffff);
 
 	/*
-	 * Create an RB tree for traceID-CPU# tuple. Since the conversion has
-	 * to be made for each packet that gets decoded, optimizing access in
-	 * anything other than a sequential array is worth doing.
+	 * Create an RB tree for traceID-metadata tuple.  Since the conversion
+	 * has to be made for each packet that gets decoded, optimizing access
+	 * in anything other than a sequential array is worth doing.
 	 */
 	traceid_list = intlist__new(NULL);
 	if (!traceid_list) {
@@ -1587,8 +1601,8 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
 			err = -EINVAL;
 			goto err_free_metadata;
 		}
-		/* All good, associate the traceID with the CPU# */
-		inode->priv = &metadata[j][CS_ETM_CPU];
+		/* All good, associate the traceID with the metadata pointer */
+		inode->priv = metadata[j];
 	}
 
 	/*
tools/perf/util/cs-etm.h +8 -1
index 37f8d48179ca..fb5fc6538b7f 100644
@@ -53,7 +53,7 @@ enum {
 	CS_ETMV4_PRIV_MAX,
 };
 
-/* RB tree for quick conversion between traceID and CPUs */
+/* RB tree for quick conversion between traceID and metadata pointers */
 struct intlist *traceid_list;
 
 #define KiB(x) ((x) * 1024)
@@ -69,6 +69,7 @@ static const u64 __perf_cs_etmv4_magic   = 0x4040404040404040ULL;
 #ifdef HAVE_CSTRACE_SUPPORT
 int cs_etm__process_auxtrace_info(union perf_event *event,
 				  struct perf_session *session);
+int cs_etm__get_cpu(u8 trace_chan_id, int *cpu);
 #else
 static inline int
 cs_etm__process_auxtrace_info(union perf_event *event __maybe_unused,
@@ -76,6 +77,12 @@ cs_etm__process_auxtrace_info(union perf_event *event __maybe_unused,
 {
 	return -1;
 }
+
+static inline int cs_etm__get_cpu(u8 trace_chan_id __maybe_unused,
+				  int *cpu __maybe_unused)
+{
+	return -1;
+}
 #endif
 
 #endif
Signature · 1 line
2.20.1
author maintainer
#41 lore raw

PATCH 41/53 perf cs-etm: Add traceID in packet

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

Add traceID in packet, thus we can use traceID to retrieve metadata pointer from traceID-metadata tuple.

---
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.c | 2 ++
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.h | 1 +
 2 files changed, 3 insertions(+)
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c +2 -0
index cdd38ffd10d2..ba4c623cd8de 100644
@@ -295,6 +295,7 @@ static void cs_etm_decoder__clear_buffer(struct cs_etm_decoder *decoder)
 		decoder->packet_buffer[i].last_instr_cond = 0;
 		decoder->packet_buffer[i].flags = 0;
 		decoder->packet_buffer[i].exception_number = UINT32_MAX;
+		decoder->packet_buffer[i].trace_chan_id = UINT8_MAX;
 		decoder->packet_buffer[i].cpu = INT_MIN;
 	}
 }
@@ -331,6 +332,7 @@ cs_etm_decoder__buffer_packet(struct cs_etm_decoder *decoder,
 	decoder->packet_buffer[et].last_instr_cond = 0;
 	decoder->packet_buffer[et].flags = 0;
 	decoder->packet_buffer[et].exception_number = UINT32_MAX;
+	decoder->packet_buffer[et].trace_chan_id = trace_chan_id;
 
 	if (decoder->packet_count == MAX_BUFFER - 1)
 		return OCSD_RESP_WAIT;
tools/perf/util/cs-etm-decoder/cs-etm-decoder.h +1 -0
index 012b4728a46f..7e6a8850be4a 100644
@@ -50,6 +50,7 @@ struct cs_etm_packet {
 	u8 last_instr_cond;
 	u8 last_instr_taken_branch;
 	u8 last_instr_size;
+	u8 trace_chan_id;
 	int cpu;
 };
 
Signature · 1 line
2.20.1
author maintainer
#42 lore raw

PATCH 42/53 perf cs-etm: Set sample flags for exception packet

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

The exception taken and returning are typical flow for instruction jump but it needs to be handled with exception packets. This patch is to set sample flags for exception packet.

Since the exception packet contains the exception number, according to the exception number this patch makes decision for belonging to which exception types.

The decoder have defined different exception number for ETMv3 and ETMv4 separately, hence this patch needs firstly decide the ETM version by using the metadata magic number, and this patch adds helper function cs_etm__get_magic() for easily getting magic number.

Based on different ETM version, the exception packet contains the exception number, according to the exception number this patch makes decision for the exception belonging to which exception types.

In this patch, it introduces helper function cs_etm__is_svc_instr(); for ETMv4 CS_ETMV4_EXC_CALL covers SVC, SMC and HVC cases in the single exception number, thus need to use cs_etm__is_svc_instr() to decide an exception taken for system call.

---
 tools/perf/util/cs-etm.c | 215 +++++++++++++++++++++++++++++++++++++++
 tools/perf/util/cs-etm.h |  44 ++++++++
 2 files changed, 259 insertions(+)
tools/perf/util/cs-etm.c +215 -0
index a5497a761db7..a714b31656ea 100644
@@ -97,6 +97,20 @@ static u32 cs_etm__get_v7_protocol_version(u32 etmidr)
 	return CS_ETM_PROTO_ETMV3;
 }
 
+static int cs_etm__get_magic(u8 trace_chan_id, u64 *magic)
+{
+	struct int_node *inode;
+	u64 *metadata;
+
+	inode = intlist__find(traceid_list, trace_chan_id);
+	if (!inode)
+		return -EINVAL;
+
+	metadata = inode->priv;
+	*magic = metadata[CS_ETM_MAGIC];
+	return 0;
+}
+
 int cs_etm__get_cpu(u8 trace_chan_id, int *cpu)
 {
 	struct int_node *inode;
@@ -1122,10 +1136,174 @@ static int cs_etm__end_block(struct cs_etm_queue *etmq)
 	return 0;
 }
 
+static bool cs_etm__is_svc_instr(struct cs_etm_queue *etmq,
+				 struct cs_etm_packet *packet,
+				 u64 end_addr)
+{
+	u16 instr16;
+	u32 instr32;
+	u64 addr;
+
+	switch (packet->isa) {
+	case CS_ETM_ISA_T32:
+		/*
+		 * The SVC of T32 is defined in ARM DDI 0487D.a, F5.1.247:
+		 *
+		 *  b'15         b'8
+		 * +-----------------+--------+
+		 * | 1 1 0 1 1 1 1 1 |  imm8  |
+		 * +-----------------+--------+
+		 *
+		 * According to the specifiction, it only defines SVC for T32
+		 * with 16 bits instruction and has no definition for 32bits;
+		 * so below only read 2 bytes as instruction size for T32.
+		 */
+		addr = end_addr - 2;
+		cs_etm__mem_access(etmq, addr, sizeof(instr16), (u8 *)&instr16);
+		if ((instr16 & 0xFF00) == 0xDF00)
+			return true;
+
+		break;
+	case CS_ETM_ISA_A32:
+		/*
+		 * The SVC of A32 is defined in ARM DDI 0487D.a, F5.1.247:
+		 *
+		 *  b'31 b'28 b'27 b'24
+		 * +---------+---------+-------------------------+
+		 * |  !1111  | 1 1 1 1 |        imm24            |
+		 * +---------+---------+-------------------------+
+		 */
+		addr = end_addr - 4;
+		cs_etm__mem_access(etmq, addr, sizeof(instr32), (u8 *)&instr32);
+		if ((instr32 & 0x0F000000) == 0x0F000000 &&
+		    (instr32 & 0xF0000000) != 0xF0000000)
+			return true;
+
+		break;
+	case CS_ETM_ISA_A64:
+		/*
+		 * The SVC of A64 is defined in ARM DDI 0487D.a, C6.2.294:
+		 *
+		 *  b'31               b'21           b'4     b'0
+		 * +-----------------------+---------+-----------+
+		 * | 1 1 0 1 0 1 0 0 0 0 0 |  imm16  | 0 0 0 0 1 |
+		 * +-----------------------+---------+-----------+
+		 */
+		addr = end_addr - 4;
+		cs_etm__mem_access(etmq, addr, sizeof(instr32), (u8 *)&instr32);
+		if ((instr32 & 0xFFE0001F) == 0xd4000001)
+			return true;
+
+		break;
+	case CS_ETM_ISA_UNKNOWN:
+	default:
+		break;
+	}
+
+	return false;
+}
+
+static bool cs_etm__is_syscall(struct cs_etm_queue *etmq, u64 magic)
+{
+	struct cs_etm_packet *packet = etmq->packet;
+	struct cs_etm_packet *prev_packet = etmq->prev_packet;
+
+	if (magic == __perf_cs_etmv3_magic)
+		if (packet->exception_number == CS_ETMV3_EXC_SVC)
+			return true;
+
+	/*
+	 * ETMv4 exception type CS_ETMV4_EXC_CALL covers SVC, SMC and
+	 * HVC cases; need to check if it's SVC instruction based on
+	 * packet address.
+	 */
+	if (magic == __perf_cs_etmv4_magic) {
+		if (packet->exception_number == CS_ETMV4_EXC_CALL &&
+		    cs_etm__is_svc_instr(etmq, prev_packet,
+					 prev_packet->end_addr))
+			return true;
+	}
+
+	return false;
+}
+
+static bool cs_etm__is_async_exception(struct cs_etm_queue *etmq, u64 magic)
+{
+	struct cs_etm_packet *packet = etmq->packet;
+
+	if (magic == __perf_cs_etmv3_magic)
+		if (packet->exception_number == CS_ETMV3_EXC_DEBUG_HALT ||
+		    packet->exception_number == CS_ETMV3_EXC_ASYNC_DATA_ABORT ||
+		    packet->exception_number == CS_ETMV3_EXC_PE_RESET ||
+		    packet->exception_number == CS_ETMV3_EXC_IRQ ||
+		    packet->exception_number == CS_ETMV3_EXC_FIQ)
+			return true;
+
+	if (magic == __perf_cs_etmv4_magic)
+		if (packet->exception_number == CS_ETMV4_EXC_RESET ||
+		    packet->exception_number == CS_ETMV4_EXC_DEBUG_HALT ||
+		    packet->exception_number == CS_ETMV4_EXC_SYSTEM_ERROR ||
+		    packet->exception_number == CS_ETMV4_EXC_INST_DEBUG ||
+		    packet->exception_number == CS_ETMV4_EXC_DATA_DEBUG ||
+		    packet->exception_number == CS_ETMV4_EXC_IRQ ||
+		    packet->exception_number == CS_ETMV4_EXC_FIQ)
+			return true;
+
+	return false;
+}
+
+static bool cs_etm__is_sync_exception(struct cs_etm_queue *etmq, u64 magic)
+{
+	struct cs_etm_packet *packet = etmq->packet;
+	struct cs_etm_packet *prev_packet = etmq->prev_packet;
+
+	if (magic == __perf_cs_etmv3_magic)
+		if (packet->exception_number == CS_ETMV3_EXC_SMC ||
+		    packet->exception_number == CS_ETMV3_EXC_HYP ||
+		    packet->exception_number == CS_ETMV3_EXC_JAZELLE_THUMBEE ||
+		    packet->exception_number == CS_ETMV3_EXC_UNDEFINED_INSTR ||
+		    packet->exception_number == CS_ETMV3_EXC_PREFETCH_ABORT ||
+		    packet->exception_number == CS_ETMV3_EXC_DATA_FAULT ||
+		    packet->exception_number == CS_ETMV3_EXC_GENERIC)
+			return true;
+
+	if (magic == __perf_cs_etmv4_magic) {
+		if (packet->exception_number == CS_ETMV4_EXC_TRAP ||
+		    packet->exception_number == CS_ETMV4_EXC_ALIGNMENT ||
+		    packet->exception_number == CS_ETMV4_EXC_INST_FAULT ||
+		    packet->exception_number == CS_ETMV4_EXC_DATA_FAULT)
+			return true;
+
+		/*
+		 * For CS_ETMV4_EXC_CALL, except SVC other instructions
+		 * (SMC, HVC) are taken as sync exceptions.
+		 */
+		if (packet->exception_number == CS_ETMV4_EXC_CALL &&
+		    !cs_etm__is_svc_instr(etmq, prev_packet,
+					  prev_packet->end_addr))
+			return true;
+
+		/*
+		 * ETMv4 has 5 bits for exception number; if the numbers
+		 * are in the range ( CS_ETMV4_EXC_FIQ, CS_ETMV4_EXC_END ]
+		 * they are implementation defined exceptions.
+		 *
+		 * For this case, simply take it as sync exception.
+		 */
+		if (packet->exception_number > CS_ETMV4_EXC_FIQ &&
+		    packet->exception_number <= CS_ETMV4_EXC_END)
+			return true;
+	}
+
+	return false;
+}
+
 static int cs_etm__set_sample_flags(struct cs_etm_queue *etmq)
 {
 	struct cs_etm_packet *packet = etmq->packet;
 	struct cs_etm_packet *prev_packet = etmq->prev_packet;
+	u64 magic;
+	int ret;
 
 	switch (packet->sample_type) {
 	case CS_ETM_RANGE:
@@ -1206,6 +1384,43 @@ static int cs_etm__set_sample_flags(struct cs_etm_queue *etmq)
 					      PERF_IP_FLAG_TRACE_END;
 		break;
 	case CS_ETM_EXCEPTION:
+		ret = cs_etm__get_magic(packet->trace_chan_id, &magic);
+		if (ret)
+			return ret;
+
+		/* The exception is for system call. */
+		if (cs_etm__is_syscall(etmq, magic))
+			packet->flags = PERF_IP_FLAG_BRANCH |
+					PERF_IP_FLAG_CALL |
+					PERF_IP_FLAG_SYSCALLRET;
+		/*
+		 * The exceptions are triggered by external signals from bus,
+		 * interrupt controller, debug module, PE reset or halt.
+		 */
+		else if (cs_etm__is_async_exception(etmq, magic))
+			packet->flags = PERF_IP_FLAG_BRANCH |
+					PERF_IP_FLAG_CALL |
+					PERF_IP_FLAG_ASYNC |
+					PERF_IP_FLAG_INTERRUPT;
+		/*
+		 * Otherwise, exception is caused by trap, instruction &
+		 * data fault, or alignment errors.
+		 */
+		else if (cs_etm__is_sync_exception(etmq, magic))
+			packet->flags = PERF_IP_FLAG_BRANCH |
+					PERF_IP_FLAG_CALL |
+					PERF_IP_FLAG_INTERRUPT;
+
+		/*
+		 * When the exception packet is inserted, since exception
+		 * packet is not used standalone for generating samples
+		 * and it's affiliation to the previous instruction range
+		 * packet; so set previous range packet flags to tell perf
+		 * it is an exception taken branch.
+		 */
+		if (prev_packet->sample_type == CS_ETM_RANGE)
+			prev_packet->flags = packet->flags;
+		break;
 	case CS_ETM_EXCEPTION_RET:
 	case CS_ETM_EMPTY:
 	default:
tools/perf/util/cs-etm.h +44 -0

50 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#43 lore raw

PATCH 43/53 perf cs-etm: Set sample flags for exception return packet

In reply to Arnaldo Carvalho de Melo

From: Leo Yan <[email protected]>

When return from exception, we need to distinguish if it's system call return or for other type exceptions for setting sample flags. Due to the exception return packet doesn't contain exception number, so we cannot decide sample flags based on exception number.

On the other hand, the exception return packet is followed by an instruction range packet; this range packet deliveries the start address after exception handling, we can check if it is a SVC instruction just before the start address. If there has one SVC instruction is found ahead the return address, this means it's an exception return for system call; otherwise it is an normal return for other exceptions.

This patch is to set sample flags for exception return packet, firstly it simply set sample flags as PERF_IP_FLAG_INTERRUPT for all exception returns since at this point it doesn't know what's exactly the exception type. We will defer to decide if it's an exception return for system call when the next instruction range packet comes, it checks if there has one SVC instruction prior to the start address and if so we will change sample flags to PERF_IP_FLAG_SYSCALLRET for system call return.

---
 tools/perf/util/cs-etm.c | 44 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
tools/perf/util/cs-etm.c +44 -0
index a714b31656ea..8b3f882d6e2f 100644
@@ -1372,6 +1372,20 @@ static int cs_etm__set_sample_flags(struct cs_etm_queue *etmq)
 		if (prev_packet->sample_type == CS_ETM_DISCONTINUITY)
 			prev_packet->flags |= PERF_IP_FLAG_BRANCH |
 					      PERF_IP_FLAG_TRACE_BEGIN;
+
+		/*
+		 * If the previous packet is an exception return packet
+		 * and the return address just follows SVC instuction,
+		 * it needs to calibrate the previous packet sample flags
+		 * as PERF_IP_FLAG_SYSCALLRET.
+		 */
+		if (prev_packet->flags == (PERF_IP_FLAG_BRANCH |
+					   PERF_IP_FLAG_RETURN |
+					   PERF_IP_FLAG_INTERRUPT) &&
+		    cs_etm__is_svc_instr(etmq, packet, packet->start_addr))
+			prev_packet->flags = PERF_IP_FLAG_BRANCH |
+					     PERF_IP_FLAG_RETURN |
+					     PERF_IP_FLAG_SYSCALLRET;
 		break;
 	case CS_ETM_DISCONTINUITY:
 		/*
@@ -1422,6 +1436,36 @@ static int cs_etm__set_sample_flags(struct cs_etm_queue *etmq)
 			prev_packet->flags = packet->flags;
 		break;
 	case CS_ETM_EXCEPTION_RET:
+		/*
+		 * When the exception return packet is inserted, since
+		 * exception return packet is not used standalone for
+		 * generating samples and it's affiliation to the previous
+		 * instruction range packet; so set previous range packet
+		 * flags to tell perf it is an exception return branch.
+		 *
+		 * The exception return can be for either system call or
+		 * other exception types; unfortunately the packet doesn't
+		 * contain exception type related info so we cannot decide
+		 * the exception type purely based on exception return packet.
+		 * If we record the exception number from exception packet and
+		 * reuse it for excpetion return packet, this is not reliable
+		 * due the trace can be discontinuity or the interrupt can
+		 * be nested, thus the recorded exception number cannot be
+		 * used for exception return packet for these two cases.
+		 *
+		 * For exception return packet, we only need to distinguish the
+		 * packet is for system call or for other types.  Thus the
+		 * decision can be deferred when receive the next packet which
+		 * contains the return address, based on the return address we
+		 * can read out the previous instruction and check if it's a
+		 * system call instruction and then calibrate the sample flag
+		 * as needed.
+		 */
+		if (prev_packet->sample_type == CS_ETM_RANGE)
+			prev_packet->flags = PERF_IP_FLAG_BRANCH |
+					     PERF_IP_FLAG_RETURN |
+					     PERF_IP_FLAG_INTERRUPT;
+		break;
 	case CS_ETM_EMPTY:
 	default:
 		break;
Signature · 1 line
2.20.1
author maintainer
#44 lore raw

PATCH 44/53 perf vendor events intel: Fix Load_Miss_Real_Latency on CLX

In reply to Arnaldo Carvalho de Melo

From: William Cohen <[email protected]>

Fix incorrect event names for the Load_Miss_Real_Latency metric for Cascadelake server in the same manner as commit 91b2b97025 for SKL/SKX.

---
 tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json +1 -1
index 36c903faed0b..71e9737f4614 100644
@@ -73,7 +73,7 @@
     },
     {
         "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads",
-        "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS_PS + MEM_LOAD_RETIRED.FB_HIT_PS )",
+        "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )",
         "MetricGroup": "Memory_Bound;Memory_Lat",
         "MetricName": "Load_Miss_Real_Latency"
     },
Signature · 1 line
2.20.1
author maintainer
#45 lore raw

PATCH 45/53 perf tools: Fix split_kallsyms_for_kcore() for trampoline symbols

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

Kallsyms symbols do not have a size, so the size becomes the distance to the next symbol.

Consequently the recently added trampoline symbols end up with large sizes because the trampolines are some distance from one another and the main kernel map.

However, symbols that end outside their map can disrupt the symbol tree because, after mapping, it can appear incorrectly that they overlap other symbols.

Add logic to truncate symbol size to the end of the corresponding map.

Fixes d83212d5dd67 ("kallsyms, x86: Export addresses of PTI entry trampolines")
---
 tools/perf/util/symbol.c | 2 ++
 1 file changed, 2 insertions(+)
tools/perf/util/symbol.c +2 -0
index 7b194cf53cc0..758bf5f74e6e 100644
@@ -718,6 +718,8 @@ static int map_groups__split_kallsyms_for_kcore(struct map_groups *kmaps, struct
 		}
 
 		pos->start -= curr_map->start - curr_map->pgoff;
+		if (pos->end > curr_map->end)
+			pos->end = curr_map->end;
 		if (pos->end)
 			pos->end -= curr_map->start - curr_map->pgoff;
 		symbols__insert(&curr_map->dso->symbols, pos);
Signature · 1 line
2.20.1
author maintainer
#46 lore raw

PATCH 46/53 perf thread-stack: Tidy thread_stack__push_cp() usage

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

If 'cp' is checked in thread_stack__push_cp() a number of error checks can be removed, reducing code size and improving readability.

---
 tools/perf/util/thread-stack.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)
tools/perf/util/thread-stack.c +3 -10
index d52f27f373ce..93ba3ab6a602 100644
@@ -493,6 +493,9 @@ static int thread_stack__push_cp(struct thread_stack *ts, u64 ret_addr,
 	struct thread_stack_entry *tse;
 	int err;
 
+	if (!cp)
+		return -ENOMEM;
+
 	if (ts->cnt == ts->sz) {
 		err = thread_stack__grow(ts);
 		if (err)
@@ -576,8 +579,6 @@ static int thread_stack__bottom(struct thread_stack *ts,
 
 	cp = call_path__findnew(cpr, &cpr->call_path, sym, ip,
 				ts->kernel_start);
-	if (!cp)
-		return -ENOMEM;
 
 	return thread_stack__push_cp(ts, ip, sample->time, ref, cp,
 				     true, false);
@@ -609,8 +610,6 @@ static int thread_stack__no_call_return(struct thread *thread,
 			cp = call_path__findnew(cpr, &cpr->call_path,
 						to_al->sym, sample->addr,
 						ts->kernel_start);
-			if (!cp)
-				return -ENOMEM;
 			return thread_stack__push_cp(ts, 0, sample->time, ref,
 						     cp, true, false);
 		}
@@ -633,8 +632,6 @@ static int thread_stack__no_call_return(struct thread *thread,
 	/* This 'return' had no 'call', so push and pop top of stack */
 	cp = call_path__findnew(cpr, parent, from_al->sym, sample->ip,
 				ts->kernel_start);
-	if (!cp)
-		return -ENOMEM;
 
 	err = thread_stack__push_cp(ts, sample->addr, sample->time, ref, cp,
 				    true, false);
@@ -680,8 +677,6 @@ static int thread_stack__trace_end(struct thread_stack *ts,
 
 	cp = call_path__findnew(cpr, ts->stack[ts->cnt - 1].cp, NULL, 0,
 				ts->kernel_start);
-	if (!cp)
-		return -ENOMEM;
 
 	ret_addr = sample->ip + sample->insn_len;
 
@@ -745,8 +740,6 @@ int thread_stack__process(struct thread *thread, struct comm *comm,
 		cp = call_path__findnew(cpr, ts->stack[ts->cnt - 1].cp,
 					to_al->sym, sample->addr,
 					ts->kernel_start);
-		if (!cp)
-			return -ENOMEM;
 		err = thread_stack__push_cp(ts, ret_addr, sample->time, ref,
 					    cp, false, trace_end);
 	} else if (sample->flags & PERF_IP_FLAG_RETURN) {
Signature · 1 line
2.20.1
author maintainer
#47 lore raw

PATCH 47/53 perf thread-stack: Tidy thread_stack__no_call_return() by adding more local variables

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

Make thread_stack__no_call_return() more readable by adding more local variables.

---
 tools/perf/util/thread-stack.c | 35 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 18 deletions(-)
tools/perf/util/thread-stack.c +17 -18
index 93ba3ab6a602..7f8eff018c16 100644
@@ -591,34 +591,36 @@ static int thread_stack__no_call_return(struct thread *thread,
 					struct addr_location *to_al, u64 ref)
 {
 	struct call_path_root *cpr = ts->crp->cpr;
+	struct call_path *root = &cpr->call_path;
+	struct symbol *fsym = from_al->sym;
+	struct symbol *tsym = to_al->sym;
 	struct call_path *cp, *parent;
 	u64 ks = ts->kernel_start;
+	u64 addr = sample->addr;
+	u64 tm = sample->time;
+	u64 ip = sample->ip;
 	int err;
 
-	if (sample->ip >= ks && sample->addr < ks) {
+	if (ip >= ks && addr < ks) {
 		/* Return to userspace, so pop all kernel addresses */
 		while (thread_stack__in_kernel(ts)) {
 			err = thread_stack__call_return(thread, ts, --ts->cnt,
-							sample->time, ref,
-							true);
+							tm, ref, true);
 			if (err)
 				return err;
 		}
 
 		/* If the stack is empty, push the userspace address */
 		if (!ts->cnt) {
-			cp = call_path__findnew(cpr, &cpr->call_path,
-						to_al->sym, sample->addr,
-						ts->kernel_start);
-			return thread_stack__push_cp(ts, 0, sample->time, ref,
-						     cp, true, false);
+			cp = call_path__findnew(cpr, root, tsym, addr, ks);
+			return thread_stack__push_cp(ts, 0, tm, ref, cp, true,
+						     false);
 		}
-	} else if (thread_stack__in_kernel(ts) && sample->ip < ks) {
+	} else if (thread_stack__in_kernel(ts) && ip < ks) {
 		/* Return to userspace, so pop all kernel addresses */
 		while (thread_stack__in_kernel(ts)) {
 			err = thread_stack__call_return(thread, ts, --ts->cnt,
-							sample->time, ref,
-							true);
+							tm, ref, true);
 			if (err)
 				return err;
 		}
@@ -627,19 +629,16 @@ static int thread_stack__no_call_return(struct thread *thread,
 	if (ts->cnt)
 		parent = ts->stack[ts->cnt - 1].cp;
 	else
-		parent = &cpr->call_path;
+		parent = root;
 
 	/* This 'return' had no 'call', so push and pop top of stack */
-	cp = call_path__findnew(cpr, parent, from_al->sym, sample->ip,
-				ts->kernel_start);
+	cp = call_path__findnew(cpr, parent, fsym, ip, ks);
 
-	err = thread_stack__push_cp(ts, sample->addr, sample->time, ref, cp,
-				    true, false);
+	err = thread_stack__push_cp(ts, addr, tm, ref, cp, true, false);
 	if (err)
 		return err;
 
-	return thread_stack__pop_cp(thread, ts, sample->addr, sample->time, ref,
-				    to_al->sym);
+	return thread_stack__pop_cp(thread, ts, addr, tm, ref, tsym);
 }
 
 static int thread_stack__trace_begin(struct thread *thread,
Signature · 1 line
2.20.1
author maintainer
#48 lore raw

PATCH 48/53 perf thread-stack: Represent jmps to the start of a different symbol

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

The compiler might optimize a call/ret combination by making it a jmp. However the thread-stack does not presently cater for that, so that such control flow is not visible in the call graph. Make it visible by recording on the stack a branch to the start of a different symbol. Note, that means when a ret pops the stack, all jmps must be popped off first.

Example:

  $ cat jmp-to-fn.c
  __attribute__((noinline)) int bar(void)
  {
          return -1;
  }
  __attribute__((noinline)) int foo(void)
  {
          return bar() + 1;
  }

int main()

  {
          return foo();
  }
  $ gcc -ggdb3 -Wall -Wextra -O2 -o jmp-to-fn jmp-to-fn.c
  $ objdump -d jmp-to-fn
  <SNIP>
  0000000000001040 <main>:
      1040:       31 c0                   xor    %eax,%eax
      1042:       e9 09 01 00 00          jmpq   1150 <foo>
  <SNIP>
  0000000000001140 <bar>:
      1140:       b8 ff ff ff ff          mov    $0xffffffff,%eax
      1145:       c3                      retq
  <SNIP>
  0000000000001150 <foo>:
      1150:       31 c0                   xor    %eax,%eax
      1152:       e8 e9 ff ff ff          callq  1140 <bar>
      1157:       83 c0 01                add    $0x1,%eax
      115a:       c3                      retq
  <SNIP>
  $ perf record -o jmp-to-fn.perf.data -e intel_pt/cyc/u ./jmp-to-fn
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0,017 MB jmp-to-fn.perf.data ]
  $ perf script -i jmp-to-fn.perf.data --itrace=be -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py jmp-to-fn.db branches calls
  2019-01-08 13:24:58.783069 Creating database...
  2019-01-08 13:24:58.794650 Writing records...
  2019-01-08 13:24:59.008050 Adding indexes
  2019-01-08 13:24:59.015802 Done
  $  ~/libexec/perf-core/scripts/python/exported-sql-viewer.py jmp-to-fn.db

Before:

    main
        -> bar

After:

    main
        -> foo
            -> bar

Committer testing:

Install the python2-pyside package, then select these menu options on the GUI:

"Reports"
"Context sensitive callgraphs"

Then go on expanding the symbols, to get, full picture when doing this on a fedora:29 with gcc version 8.2.1 20181215 (Red Hat 8.2.1-6) (GCC):

jmp-to-fn
PID:TID

    _start                (ld-2.28.so)
      __libc_start_main
        main
          foo
            bar

To verify that indeed, this fixes the problem.

---
 .../scripts/python/export-to-postgresql.py    |  2 +-
 tools/perf/scripts/python/export-to-sqlite.py |  2 +-
 tools/perf/util/thread-stack.c                | 30 +++++++++++++++++--
 tools/perf/util/thread-stack.h                |  3 ++
 4 files changed, 33 insertions(+), 4 deletions(-)
tools/perf/scripts/python/export-to-postgresql.py +1 -1
index 0564dd7377f2..30130213da7e 100644
@@ -478,7 +478,7 @@ if perf_db_export_calls:
 			'branch_count,'
 			'call_id,'
 			'return_id,'
-			'CASE WHEN flags=1 THEN \'no call\' WHEN flags=2 THEN \'no return\' WHEN flags=3 THEN \'no call/return\' ELSE \'\' END AS flags,'
+			'CASE WHEN flags=0 THEN \'\' WHEN flags=1 THEN \'no call\' WHEN flags=2 THEN \'no return\' WHEN flags=3 THEN \'no call/return\' WHEN flags=6 THEN \'jump\' ELSE flags END AS flags,'
 			'parent_call_path_id'
 		' FROM calls INNER JOIN call_paths ON call_paths.id = call_path_id')
 
tools/perf/scripts/python/export-to-sqlite.py +1 -1
index 245caf2643ed..ed237f2ed03f 100644
@@ -320,7 +320,7 @@ if perf_db_export_calls:
 			'branch_count,'
 			'call_id,'
 			'return_id,'
-			'CASE WHEN flags=1 THEN \'no call\' WHEN flags=2 THEN \'no return\' WHEN flags=3 THEN \'no call/return\' ELSE \'\' END AS flags,'
+			'CASE WHEN flags=0 THEN \'\' WHEN flags=1 THEN \'no call\' WHEN flags=2 THEN \'no return\' WHEN flags=3 THEN \'no call/return\' WHEN flags=6 THEN \'jump\' ELSE flags END AS flags,'
 			'parent_call_path_id'
 		' FROM calls INNER JOIN call_paths ON call_paths.id = call_path_id')
 
tools/perf/util/thread-stack.c +28 -2
index 7f8eff018c16..f52c0f90915d 100644
@@ -38,6 +38,7 @@
  * @cp: call path
  * @no_call: a 'call' was not seen
  * @trace_end: a 'call' but trace ended
+ * @non_call: a branch but not a 'call' to the start of a different symbol
  */
 struct thread_stack_entry {
 	u64 ret_addr;
@@ -47,6 +48,7 @@ struct thread_stack_entry {
 	struct call_path *cp;
 	bool no_call;
 	bool trace_end;
+	bool non_call;
 };
 
 /**
@@ -268,6 +270,8 @@ static int thread_stack__call_return(struct thread *thread,
 		cr.flags |= CALL_RETURN_NO_CALL;
 	if (no_return)
 		cr.flags |= CALL_RETURN_NO_RETURN;
+	if (tse->non_call)
+		cr.flags |= CALL_RETURN_NON_CALL;
 
 	return crp->process(&cr, crp->data);
 }
@@ -510,6 +514,7 @@ static int thread_stack__push_cp(struct thread_stack *ts, u64 ret_addr,
 	tse->cp = cp;
 	tse->no_call = no_call;
 	tse->trace_end = trace_end;
+	tse->non_call = false;
 
 	return 0;
 }
@@ -531,14 +536,16 @@ static int thread_stack__pop_cp(struct thread *thread, struct thread_stack *ts,
 							 timestamp, ref, false);
 	}
 
-	if (ts->stack[ts->cnt - 1].ret_addr == ret_addr) {
+	if (ts->stack[ts->cnt - 1].ret_addr == ret_addr &&
+	    !ts->stack[ts->cnt - 1].non_call) {
 		return thread_stack__call_return(thread, ts, --ts->cnt,
 						 timestamp, ref, false);
 	} else {
 		size_t i = ts->cnt - 1;
 
 		while (i--) {
-			if (ts->stack[i].ret_addr != ret_addr)
+			if (ts->stack[i].ret_addr != ret_addr ||
+			    ts->stack[i].non_call)
 				continue;
 			i += 1;
 			while (ts->cnt > i) {
@@ -757,6 +764,25 @@ int thread_stack__process(struct thread *thread, struct comm *comm,
 		err = thread_stack__trace_begin(thread, ts, sample->time, ref);
 	} else if (sample->flags & PERF_IP_FLAG_TRACE_END) {
 		err = thread_stack__trace_end(ts, sample, ref);
+	} else if (sample->flags & PERF_IP_FLAG_BRANCH &&
+		   from_al->sym != to_al->sym && to_al->sym &&
+		   to_al->addr == to_al->sym->start) {
+		struct call_path_root *cpr = ts->crp->cpr;
+		struct call_path *cp;
+
+		/*
+		 * The compiler might optimize a call/ret combination by making
+		 * it a jmp. Make that visible by recording on the stack a
+		 * branch to the start of a different symbol. Note, that means
+		 * when a ret pops the stack, all jmps must be popped off first.
+		 */
+		cp = call_path__findnew(cpr, ts->stack[ts->cnt - 1].cp,
+					to_al->sym, sample->addr,
+					ts->kernel_start);
+		err = thread_stack__push_cp(ts, 0, sample->time, ref, cp, false,
+					    false);
+		if (!err)
+			ts->stack[ts->cnt - 1].non_call = true;
 	}
 
 	return err;
tools/perf/util/thread-stack.h +3 -0
index 1f626f4a1c40..b7c04e19ad41 100644
@@ -35,10 +35,13 @@ struct call_path;
  *
  * CALL_RETURN_NO_CALL: 'return' but no matching 'call'
  * CALL_RETURN_NO_RETURN: 'call' but no matching 'return'
+ * CALL_RETURN_NON_CALL: a branch but not a 'call' to the start of a different
+ *                       symbol
  */
 enum {
 	CALL_RETURN_NO_CALL	= 1 << 0,
 	CALL_RETURN_NO_RETURN	= 1 << 1,
+	CALL_RETURN_NON_CALL	= 1 << 2,
 };
 
 /**
Signature · 1 line
2.20.1
author maintainer
#49 lore raw

PATCH 49/53 perf auxtrace: Define auxtrace record alignment

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

Define auxtrace record alignment so that it can be referenced elsewhere.

Note this is preparation for patch "perf intel-pt: Fix overlap calculation for padding"

---
 tools/perf/util/auxtrace.c | 4 ++--
 tools/perf/util/auxtrace.h | 3 +++
 2 files changed, 5 insertions(+), 2 deletions(-)
tools/perf/util/auxtrace.c +2 -2
index 94a22cc8004c..ad186d3255d1 100644
@@ -1279,9 +1279,9 @@ static int __auxtrace_mmap__read(struct perf_mmap *map,
 	}
 
 	/* padding must be written by fn() e.g. record__process_auxtrace() */
-	padding = size & 7;
+	padding = size & (PERF_AUXTRACE_RECORD_ALIGNMENT - 1);
 	if (padding)
-		padding = 8 - padding;
+		padding = PERF_AUXTRACE_RECORD_ALIGNMENT - padding;
 
 	memset(&ev, 0, sizeof(ev));
 	ev.auxtrace.header.type = PERF_RECORD_AUXTRACE;
tools/perf/util/auxtrace.h +3 -0
index 8e50f96d4b23..fac32482db61 100644
@@ -40,6 +40,9 @@ struct record_opts;
 struct auxtrace_info_event;
 struct events_stats;
 
+/* Auxtrace records must have the same alignment as perf event records */
+#define PERF_AUXTRACE_RECORD_ALIGNMENT 8
+
 enum auxtrace_type {
 	PERF_AUXTRACE_UNKNOWN,
 	PERF_AUXTRACE_INTEL_PT,
Signature · 1 line
2.20.1
author maintainer
#50 lore raw

PATCH 50/53 perf intel-pt: Fix overlap calculation for padding

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

Auxtrace records might have up to 7 bytes of padding appended. Adjust the overlap accordingly.

---
 .../util/intel-pt-decoder/intel-pt-decoder.c  | 36 +++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +34 -2
index 4503f3ca45ab..ecd25cdc1d3e 100644
@@ -26,6 +26,7 @@
 
 #include "../cache.h"
 #include "../util.h"
+#include "../auxtrace.h"
 
 #include "intel-pt-insn-decoder.h"
 #include "intel-pt-pkt-decoder.h"
@@ -2575,6 +2576,34 @@ static int intel_pt_tsc_cmp(uint64_t tsc1, uint64_t tsc2)
 	}
 }
 
+#define MAX_PADDING (PERF_AUXTRACE_RECORD_ALIGNMENT - 1)
+
+/**
+ * adj_for_padding - adjust overlap to account for padding.
+ * @buf_b: second buffer
+ * @buf_a: first buffer
+ * @len_a: size of first buffer
+ *
+ * @buf_a might have up to 7 bytes of padding appended. Adjust the overlap
+ * accordingly.
+ *
+ * Return: A pointer into @buf_b from where non-overlapped data starts
+ */
+static unsigned char *adj_for_padding(unsigned char *buf_b,
+				      unsigned char *buf_a, size_t len_a)
+{
+	unsigned char *p = buf_b - MAX_PADDING;
+	unsigned char *q = buf_a + len_a - MAX_PADDING;
+	int i;
+
+	for (i = MAX_PADDING; i; i--, p++, q++) {
+		if (*p != *q)
+			break;
+	}
+
+	return p;
+}
+
 /**
  * intel_pt_find_overlap_tsc - determine start of non-overlapped trace data
  *                             using TSC.
@@ -2625,8 +2654,11 @@ static unsigned char *intel_pt_find_overlap_tsc(unsigned char *buf_a,
 
 			/* Same TSC, so buffers are consecutive */
 			if (!cmp && rem_b >= rem_a) {
+				unsigned char *start;
+
 				*consecutive = true;
-				return buf_b + len_b - (rem_b - rem_a);
+				start = buf_b + len_b - (rem_b - rem_a);
+				return adj_for_padding(start, buf_a, len_a);
 			}
 			if (cmp < 0)
 				return buf_b; /* tsc_a < tsc_b => no overlap */
@@ -2689,7 +2721,7 @@ unsigned char *intel_pt_find_overlap(unsigned char *buf_a, size_t len_a,
 		found = memmem(buf_a, len_a, buf_b, len_a);
 		if (found) {
 			*consecutive = true;
-			return buf_b + len_a;
+			return adj_for_padding(buf_b + len_a, buf_a, len_a);
 		}
 
 		/* Try again at next PSB in buffer 'a' */
Signature · 1 line
2.20.1
author maintainer
#51 lore raw

PATCH 51/53 perf intel-pt: Fix CYC timestamp calculation after OVF

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

CYC packet timestamp calculation depends upon CBR which was being cleared upon overflow (OVF). That can cause errors due to failing to synchronize with sideband events. Even if a CBR change has been lost, the old CBR is still a better estimate than zero. So remove the clearing of CBR.

---
 tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 1 -
 1 file changed, 1 deletion(-)
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +0 -1
index ecd25cdc1d3e..a54d6c9a4601 100644
@@ -1395,7 +1395,6 @@ static int intel_pt_overflow(struct intel_pt_decoder *decoder)
 {
 	intel_pt_log("ERROR: Buffer overflow\n");
 	intel_pt_clear_tx_flags(decoder);
-	decoder->cbr = 0;
 	decoder->timestamp_insn_cnt = 0;
 	decoder->pkt_state = INTEL_PT_STATE_ERR_RESYNC;
 	decoder->overflow = true;
Signature · 1 line
2.20.1
author maintainer
#52 lore raw

PATCH 52/53 perf intel-pt: Packet splitting can happen only on 32-bit

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

Data is copied when the trace is stopped, so packets are never split between buffers except when processing if the buffer cannot fit in the address space which can only happen on 32-bit systems. Change the logic to reflect that.

---
 tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +1 -1
index a54d6c9a4601..6e03db142091 100644
@@ -868,7 +868,7 @@ static int intel_pt_get_next_packet(struct intel_pt_decoder *decoder)
 
 		ret = intel_pt_get_packet(decoder->buf, decoder->len,
 					  &decoder->packet);
-		if (ret == INTEL_PT_NEED_MORE_BYTES &&
+		if (ret == INTEL_PT_NEED_MORE_BYTES && BITS_PER_LONG == 32 &&
 		    decoder->len < INTEL_PT_PKT_MAX_SZ && !decoder->next_buf) {
 			ret = intel_pt_get_split_packet(decoder);
 			if (ret < 0)
Signature · 1 line
2.20.1
author maintainer
#53 lore raw

PATCH 53/53 perf auxtrace: Add timestamp to auxtrace errors

In reply to Arnaldo Carvalho de Melo

From: Adrian Hunter <[email protected]>

The timestamp can use useful to find part of a trace that has an error without outputting all of the trace e.g. using the itrace 's' option to skip initial number of events.

---
 tools/perf/util/auxtrace.c    | 22 ++++++++++++++++++++--
 tools/perf/util/auxtrace.h    |  2 +-
 tools/perf/util/event.h       |  3 ++-
 tools/perf/util/intel-bts.c   |  4 ++--
 tools/perf/util/intel-pt.c    | 23 ++++++++++++++++-------
 tools/perf/util/s390-cpumsf.c |  7 ++++---
 tools/perf/util/session.c     |  3 +++
 7 files changed, 48 insertions(+), 16 deletions(-)
tools/perf/util/auxtrace.c +20 -2
index ad186d3255d1..267e54df511b 100644
@@ -27,6 +27,7 @@
 #include <linux/bitops.h>
 #include <linux/log2.h>
 #include <linux/string.h>
+#include <linux/time64.h>
 
 #include <sys/param.h>
 #include <stdlib.h>
@@ -858,7 +859,7 @@ void auxtrace_buffer__free(struct auxtrace_buffer *buffer)
 
 void auxtrace_synth_error(struct auxtrace_error_event *auxtrace_error, int type,
 			  int code, int cpu, pid_t pid, pid_t tid, u64 ip,
-			  const char *msg)
+			  const char *msg, u64 timestamp)
 {
 	size_t size;
 
@@ -870,7 +871,9 @@ void auxtrace_synth_error(struct auxtrace_error_event *auxtrace_error, int type,
 	auxtrace_error->cpu = cpu;
 	auxtrace_error->pid = pid;
 	auxtrace_error->tid = tid;
+	auxtrace_error->fmt = 1;
 	auxtrace_error->ip = ip;
+	auxtrace_error->time = timestamp;
 	strlcpy(auxtrace_error->msg, msg, MAX_AUXTRACE_ERROR_MSG);
 
 	size = (void *)auxtrace_error->msg - (void *)auxtrace_error +
@@ -1160,12 +1163,27 @@ static const char *auxtrace_error_name(int type)
 size_t perf_event__fprintf_auxtrace_error(union perf_event *event, FILE *fp)
 {
 	struct auxtrace_error_event *e = &event->auxtrace_error;
+	unsigned long long nsecs = e->time;
+	const char *msg = e->msg;
 	int ret;
 
 	ret = fprintf(fp, " %s error type %u",
 		      auxtrace_error_name(e->type), e->type);
+
+	if (e->fmt && nsecs) {
+		unsigned long secs = nsecs / NSEC_PER_SEC;
+
+		nsecs -= secs * NSEC_PER_SEC;
+		ret += fprintf(fp, " time %lu.%09llu", secs, nsecs);
+	} else {
+		ret += fprintf(fp, " time 0");
+	}
+
+	if (!e->fmt)
+		msg = (const char *)&e->time;
+
 	ret += fprintf(fp, " cpu %d pid %d tid %d ip %#"PRIx64" code %u: %s\n",
-		       e->cpu, e->pid, e->tid, e->ip, e->code, e->msg);
+		       e->cpu, e->pid, e->tid, e->ip, e->code, msg);
 	return ret;
 }
 
tools/perf/util/auxtrace.h +1 -1
index fac32482db61..c69bcd9a3091 100644
@@ -519,7 +519,7 @@ void auxtrace_index__free(struct list_head *head);
 
 void auxtrace_synth_error(struct auxtrace_error_event *auxtrace_error, int type,
 			  int code, int cpu, pid_t pid, pid_t tid, u64 ip,
-			  const char *msg);
+			  const char *msg, u64 timestamp);
 
 int perf_event__synthesize_auxtrace_info(struct auxtrace_record *itr,
 					 struct perf_tool *tool,
tools/perf/util/event.h +2 -1
index feba1aa819b4..36ae7e92dab1 100644
@@ -532,8 +532,9 @@ struct auxtrace_error_event {
 	u32 cpu;
 	u32 pid;
 	u32 tid;
-	u32 reserved__; /* For alignment */
+	u32 fmt;
 	u64 ip;
+	u64 time;
 	char msg[MAX_AUXTRACE_ERROR_MSG];
 };
 
tools/perf/util/intel-bts.c +2 -2
index f99ac0cbe3ff..0c0180c67574 100644
@@ -144,7 +144,7 @@ static int intel_bts_lost(struct intel_bts *bts, struct perf_sample *sample)
 
 	auxtrace_synth_error(&event.auxtrace_error, PERF_AUXTRACE_ERROR_ITRACE,
 			     INTEL_BTS_ERR_LOST, sample->cpu, sample->pid,
-			     sample->tid, 0, "Lost trace data");
+			     sample->tid, 0, "Lost trace data", sample->time);
 
 	err = perf_session__deliver_synth_event(bts->session, &event, NULL);
 	if (err)
@@ -374,7 +374,7 @@ static int intel_bts_synth_error(struct intel_bts *bts, int cpu, pid_t pid,
 
 	auxtrace_synth_error(&event.auxtrace_error, PERF_AUXTRACE_ERROR_ITRACE,
 			     INTEL_BTS_ERR_NOINSN, cpu, pid, tid, ip,
-			     "Failed to get instruction");
+			     "Failed to get instruction", 0);
 
 	err = perf_session__deliver_synth_event(bts->session, &event, NULL);
 	if (err)
tools/perf/util/intel-pt.c +16 -7
index 2e72373ec6df..3b497bab4324 100644
@@ -1411,7 +1411,7 @@ static int intel_pt_synth_pwrx_sample(struct intel_pt_queue *ptq)
 }
 
 static int intel_pt_synth_error(struct intel_pt *pt, int code, int cpu,
-				pid_t pid, pid_t tid, u64 ip)
+				pid_t pid, pid_t tid, u64 ip, u64 timestamp)
 {
 	union perf_event event;
 	char msg[MAX_AUXTRACE_ERROR_MSG];
@@ -1420,7 +1420,7 @@ static int intel_pt_synth_error(struct intel_pt *pt, int code, int cpu,
 	intel_pt__strerror(code, msg, MAX_AUXTRACE_ERROR_MSG);
 
 	auxtrace_synth_error(&event.auxtrace_error, PERF_AUXTRACE_ERROR_ITRACE,
-			     code, cpu, pid, tid, ip, msg);
+			     code, cpu, pid, tid, ip, msg, timestamp);
 
 	err = perf_session__deliver_synth_event(pt->session, &event, NULL);
 	if (err)
@@ -1430,6 +1430,18 @@ static int intel_pt_synth_error(struct intel_pt *pt, int code, int cpu,
 	return err;
 }
 
+static int intel_ptq_synth_error(struct intel_pt_queue *ptq,
+				 const struct intel_pt_state *state)
+{
+	struct intel_pt *pt = ptq->pt;
+	u64 tm = ptq->timestamp;
+
+	tm = pt->timeless_decoding ? 0 : tsc_to_perf_time(tm, &pt->tc);
+
+	return intel_pt_synth_error(pt, state->err, ptq->cpu, ptq->pid,
+				    ptq->tid, state->from_ip, tm);
+}
+
 static int intel_pt_next_tid(struct intel_pt *pt, struct intel_pt_queue *ptq)
 {
 	struct auxtrace_queue *queue;
@@ -1676,10 +1688,7 @@ static int intel_pt_run_decoder(struct intel_pt_queue *ptq, u64 *timestamp)
 				intel_pt_next_tid(pt, ptq);
 			}
 			if (pt->synth_opts.errors) {
-				err = intel_pt_synth_error(pt, state->err,
-							   ptq->cpu, ptq->pid,
-							   ptq->tid,
-							   state->from_ip);
+				err = intel_ptq_synth_error(ptq, state);
 				if (err)
 					return err;
 			}
@@ -1804,7 +1813,7 @@ static int intel_pt_process_timeless_queues(struct intel_pt *pt, pid_t tid,
 static int intel_pt_lost(struct intel_pt *pt, struct perf_sample *sample)
 {
 	return intel_pt_synth_error(pt, INTEL_PT_ERR_LOST, sample->cpu,
-				    sample->pid, sample->tid, 0);
+				    sample->pid, sample->tid, 0, sample->time);
 }
 
 static struct intel_pt_queue *intel_pt_cpu_to_ptq(struct intel_pt *pt, int cpu)
tools/perf/util/s390-cpumsf.c +4 -3
index 835249c77f56..d9525d220db1 100644
@@ -819,7 +819,7 @@ static int s390_cpumsf_process_queues(struct s390_cpumsf *sf, u64 timestamp)
 }
 
 static int s390_cpumsf_synth_error(struct s390_cpumsf *sf, int code, int cpu,
-				   pid_t pid, pid_t tid, u64 ip)
+				   pid_t pid, pid_t tid, u64 ip, u64 timestamp)
 {
 	char msg[MAX_AUXTRACE_ERROR_MSG];
 	union perf_event event;
@@ -827,7 +827,7 @@ static int s390_cpumsf_synth_error(struct s390_cpumsf *sf, int code, int cpu,
 
 	strncpy(msg, "Lost Auxiliary Trace Buffer", sizeof(msg) - 1);
 	auxtrace_synth_error(&event.auxtrace_error, PERF_AUXTRACE_ERROR_ITRACE,
-			     code, cpu, pid, tid, ip, msg);
+			     code, cpu, pid, tid, ip, msg, timestamp);
 
 	err = perf_session__deliver_synth_event(sf->session, &event, NULL);
 	if (err)
@@ -839,7 +839,8 @@ static int s390_cpumsf_synth_error(struct s390_cpumsf *sf, int code, int cpu,
 static int s390_cpumsf_lost(struct s390_cpumsf *sf, struct perf_sample *sample)
 {
 	return s390_cpumsf_synth_error(sf, 1, sample->cpu,
-				       sample->pid, sample->tid, 0);
+				       sample->pid, sample->tid, 0,
+				       sample->time);
 }
 
 static int
tools/perf/util/session.c +3 -0
index 2012396abb7c..18fb9c8cbf9c 100644
@@ -703,7 +703,10 @@ static void perf_event__auxtrace_error_swap(union perf_event *event,
 	event->auxtrace_error.cpu  = bswap_32(event->auxtrace_error.cpu);
 	event->auxtrace_error.pid  = bswap_32(event->auxtrace_error.pid);
 	event->auxtrace_error.tid  = bswap_32(event->auxtrace_error.tid);
+	event->auxtrace_error.fmt  = bswap_32(event->auxtrace_error.fmt);
 	event->auxtrace_error.ip   = bswap_64(event->auxtrace_error.ip);
+	if (event->auxtrace_error.fmt)
+		event->auxtrace_error.time = bswap_64(event->auxtrace_error.time);
 }
 
 static void perf_event__thread_map_swap(union perf_event *event,
Signature · 1 line
2.20.1
#54 lore raw
In reply to Arnaldo Carvalho de Melo
Quoted 300 lines · Arnaldo Carvalho de Melo

Hi Ingo,

Please consider pulling,

- Arnaldo

Test results at the end of this message, as usual.

The following changes since commit ca3bb3d027f69ac3ab1dafb32bde2f5a3a44439c:

perf/ring_buffer: Convert ring_buffer.aux_refcount to refcount_t (2019-02-04 08:46:17 +0100)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git tags/perf-core-for-mingo-5.1-20190206

for you to fetch changes up to 16bd4321c2425d37031a902cdbf183e2cd099946:

perf auxtrace: Add timestamp to auxtrace errors (2019-02-06 11:20:32 -0300)

----------------------------------------------------------------
perf/core improvements and fixes:

Hardware tracing:

Adrian Hunter:

- Handle calls optimized into jumps to a different symbol
in the thread stack routines used to process hardware traces (Adrian Hunter)

Intel PT:

Adrian Hunter:

- Fix overlap calculation for padding.

- Fix CYC timestamp calculation after OVF.

- Packet splitting can only happen in 32-bit.

- Add timestamp to auxtrace errors.

ARM CoreSight:

Leo Yan:

- Add last instruction information in packet

- Set sample flags for instruction range, exception and return packets and for a trace discontinuity.

- Add exception number in exception packet

- Change tuple from traceID-CPU# to traceID-metadata

- Add traceID in packet

Mathieu Poirier:

- Add "sinks" group to PMU directory

- Use event attributes to send sink information to kernel

- Remove set_drv_config() API, no longer used.

perf annotate:

Jiri Olsa:

- Delay symbol annotation to the resort phase, speeding up 'perf report' startup.

perf record:

Alexey Budankov:

- Allow binding userspace buffers to NUMA nodes.

Symbols:

Adrian Hunter:

- Fix calculating of symbol sizes when splitting kallsyms into maps for kcore processing.

Vendor events:

William Cohen:

- Intel: Fix Load_Miss_Real_Latency on CLX

Misc:

Arnaldo Carvalho de Melo:

- Streamline headers, removing includes when all that is needed are just forward declarations, fixup the fallout for cases where headers should have been explicitely included but were instead obtained indirectly, by sheer luck.

- Add fallback versions for CPU_{OR,EQUAL}(), so that code using it continue to build on older systems where those were not yet introduced or in systems using some other libc than the GNU one where those helpers aren't present.

Documentation:

Changbin Du:

- Add documentation for BPF event selection.

----------------------------------------------------------------
Adrian Hunter (9):
perf tools: Fix split_kallsyms_for_kcore() for trampoline symbols
perf thread-stack: Tidy thread_stack__push_cp() usage
perf thread-stack: Tidy thread_stack__no_call_return() by adding more local variables perf thread-stack: Represent jmps to the start of a different symbol perf auxtrace: Define auxtrace record alignment
perf intel-pt: Fix overlap calculation for padding
perf intel-pt: Fix CYC timestamp calculation after OVF
perf intel-pt: Packet splitting can happen only on 32-bit
perf auxtrace: Add timestamp to auxtrace errors

Alexey Budankov (3):
perf record: Allocate affinity masks
perf record: Bind the AIO user space buffers to nodes perf record: Apply affinity masks when reading mmap buffers

Arnaldo Carvalho de Melo (21):
perf powerpc: Add missing headers to skip-callchain-idx.c
perf arm pmu: Add missing linux/string.h header
perf srccode: Move struct definition from map.h to srccode.h perf callchain: Uninline callchain_cursor_reset() to remove map.h dependency perf symbols: Introduce map_symbol.h
pref tools: Add missing map.h includes
perf map: Move structs and prototypes for map groups to a separate header perf tests: Add missing headers so far obtained indirectly
perf hist: Remove symbol.h from hist.h, just fwd decls are needed perf tools: Add missing include for symbols.h
perf evsel: No need to include symbol.h in evsel.h, symbol_conf.h is enough perf thread: Don't include symbol.h, symbol_conf.h is enough perf tools: Add missing include <callchain.h> in various places perf hist: Remove the needless callchain.h include from hist.h perf tests pmu: Add missing headers
perf pmu: Remove needless evsel.h include, only needs one fwd decl perf kvm stat: Replace kvm-stat.h includes with forward declarations perf powerpc kvm-stat: Add missing evlist.h header
perf bpf-loader: Remove unecessary includes from bpf-loader.h perf tools: Add fallback versions for CPU_{OR,EQUAL}()
perf clang: Do not use 'return std::move(something)'

Changbin Du (1):
perf tools: Add documentation for BPF event selection

Jiri Olsa (3):
perf hists: Add argument to hists__resort_cb_t callback perf evsel: Add output_resort_cb method
perf report: Move symbol annotation to the resort phase

Leo Yan (8):
perf cs-etm: Add last instruction information in packet perf cs-etm: Set sample flags for instruction range packet perf cs-etm: Set sample flags for trace discontinuity perf cs-etm: Add exception number in exception packet perf cs-etm: Change tuple from traceID-CPU# to traceID-metadata perf cs-etm: Add traceID in packet
perf cs-etm: Set sample flags for exception packet perf cs-etm: Set sample flags for exception return packet

Mathieu Poirier (7):
perf/aux: Make perf_event accessible to setup_aux()
coresight: perf: Add "sinks" group to PMU directory
coresight: Use event attributes for sink selection
perf pmu: Move EVENT_SOURCE_DEVICE_PATH to PMU header file perf arm cs-etm: Use event attributes to send sink information to kernel perf coresight: Remove set_drv_config() API
perf pmu: Remove set_drv_config API

William Cohen (1):
perf vendor events intel: Fix Load_Miss_Real_Latency on CLX

 arch/s390/kernel/perf_cpum_sf.c                    |   6 +-
 arch/x86/events/intel/bts.c                        |   4 +-
 arch/x86/events/intel/pt.c                         |   5 +-
 drivers/hwtracing/coresight/coresight-etm-perf.c   | 112 +++++-
 drivers/hwtracing/coresight/coresight-etm-perf.h   |   6 +-
 drivers/hwtracing/coresight/coresight-priv.h       |   1 +
 drivers/hwtracing/coresight/coresight.c            |  60 ++++
 drivers/perf/arm_spe_pmu.c                         |   6 +-
 include/linux/coresight.h                          |   7 +-
 include/linux/perf_event.h                         |   2 +-
 kernel/events/ring_buffer.c                        |   2 +-
 tools/perf/Documentation/perf-config.txt           |  31 ++
 tools/perf/Documentation/perf-record.txt           |  14 +
 tools/perf/arch/arm/tests/dwarf-unwind.c           |   1 +
 tools/perf/arch/arm/util/cs-etm.c                  |  98 +++--
 tools/perf/arch/arm/util/cs-etm.h                  |   3 -
 tools/perf/arch/arm/util/pmu.c                     |   3 +-
 tools/perf/arch/arm64/tests/dwarf-unwind.c         |   1 +
 tools/perf/arch/powerpc/tests/dwarf-unwind.c       |   1 +
 tools/perf/arch/powerpc/util/kvm-stat.c            |   2 +
 tools/perf/arch/powerpc/util/skip-callchain-idx.c  |   3 +
 tools/perf/arch/s390/util/kvm-stat.c               |   1 +
 tools/perf/arch/x86/tests/dwarf-unwind.c           |   1 +
 tools/perf/arch/x86/util/kvm-stat.c                |   1 +
 tools/perf/builtin-annotate.c                      |   1 +
 tools/perf/builtin-c2c.c                           |   9 +-
 tools/perf/builtin-inject.c                        |   2 +
 tools/perf/builtin-kallsyms.c                      |   1 +
 tools/perf/builtin-kmem.c                          |   1 +
 tools/perf/builtin-mem.c                           |   1 +
 tools/perf/builtin-record.c                        |  38 +-
 tools/perf/builtin-report.c                        |  22 +-
 tools/perf/builtin-script.c                        |   1 +
 tools/perf/builtin-stat.c                          |   9 -
 tools/perf/builtin-top.c                           |  14 +-
 tools/perf/builtin-trace.c                         |   2 +
 tools/perf/perf.h                                  |   8 +
 .../arch/x86/cascadelakex/clx-metrics.json         |   2 +-
 tools/perf/scripts/python/export-to-postgresql.py  |   2 +-
 tools/perf/scripts/python/export-to-sqlite.py      |   2 +-
 tools/perf/tests/code-reading.c                    |   2 +
 tools/perf/tests/dwarf-unwind.c                    |   1 +
 tools/perf/tests/hists_common.c                    |   1 +
 tools/perf/tests/hists_cumulate.c                  |   1 +
 tools/perf/tests/hists_filter.c                    |   1 +
 tools/perf/tests/hists_output.c                    |   1 +
 tools/perf/tests/mmap-thread-lookup.c              |   1 +
 tools/perf/tests/pmu.c                             |   2 +
 tools/perf/tests/sample-parsing.c                  |   2 +
 tools/perf/tests/sdt.c                             |   1 +
 tools/perf/ui/browsers/annotate.c                  |   1 +
 tools/perf/ui/browsers/hists.c                     |   3 +
 tools/perf/ui/gtk/annotate.c                       |   2 +
 tools/perf/ui/gtk/hists.c                          |   1 +
 tools/perf/ui/hist.c                               |   1 +
 tools/perf/ui/stdio/hist.c                         |   4 +
 tools/perf/util/Build                              |   1 -
 tools/perf/util/annotate.c                         |   1 +
 tools/perf/util/auxtrace.c                         |  27 +-
 tools/perf/util/auxtrace.h                         |   5 +-
 tools/perf/util/bpf-loader.c                       |   1 +
 tools/perf/util/bpf-loader.h                       |   7 +-
 tools/perf/util/build-id.c                         |   1 +
 tools/perf/util/c++/clang.cpp                      |   2 +-
 tools/perf/util/callchain.c                        |  17 +
 tools/perf/util/callchain.h                        |  20 +-
 tools/perf/util/config.c                           |   1 +
 tools/perf/util/cpu-set-sched.h                    |  50 +++
 tools/perf/util/cpumap.c                           |  10 +
 tools/perf/util/cpumap.h                           |   1 +
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.c    |  41 ++-
 tools/perf/util/cs-etm-decoder/cs-etm-decoder.h    |   6 +
 tools/perf/util/cs-etm.c                           | 394 ++++++++++++++++++++-
 tools/perf/util/cs-etm.h                           |  53 ++-
 tools/perf/util/db-export.c                        |   1 +
 tools/perf/util/drv_configs.c                      |  78 ----
 tools/perf/util/drv_configs.h                      |  26 --
 tools/perf/util/dso.c                              |   1 +
 tools/perf/util/event.c                            |   2 +
 tools/perf/util/event.h                            |   3 +-
 tools/perf/util/evlist.c                           |   6 +-
 tools/perf/util/evlist.h                           |   2 +-
 tools/perf/util/evsel.h                            |   2 +-
 tools/perf/util/hist.c                             |  21 +-
 tools/perf/util/hist.h                             |   9 +-
 tools/perf/util/intel-bts.c                        |   6 +-
 .../perf/util/intel-pt-decoder/intel-pt-decoder.c  |  39 +-
 tools/perf/util/intel-pt.c                         |  23 +-
 tools/perf/util/kvm-stat.h                         |   7 +-
 tools/perf/util/machine.c                          |   1 +
 tools/perf/util/machine.h                          |   2 +-
 tools/perf/util/map.c                              |   6 +
 tools/perf/util/map.h                              | 100 +-----
 tools/perf/util/map_groups.h                       |  91 +++++
 tools/perf/util/map_symbol.h                       |  22 ++
 tools/perf/util/mmap.c                             | 105 +++++-
 tools/perf/util/mmap.h                             |   3 +-
 tools/perf/util/pmu.c                              |   2 -
 tools/perf/util/pmu.h                              |   5 +-
 tools/perf/util/probe-event.c                      |   2 +
 tools/perf/util/s390-cpumsf.c                      |   7 +-
 .../perf/util/scripting-engines/trace-event-perl.c |   2 +
 .../util/scripting-engines/trace-event-python.c    |   2 +
 tools/perf/util/session.c                          |   5 +
 tools/perf/util/setup.py                           |   5 +
 tools/perf/util/sort.c                             |   8 +-
 tools/perf/util/sort.h                             |   3 +-
 tools/perf/util/srccode.h                          |  13 +
 tools/perf/util/symbol-elf.c                       |   2 +
 tools/perf/util/symbol.c                           |   3 +
 tools/perf/util/symbol.h                           |  14 +-
 tools/perf/util/thread-stack.c                     |  78 ++--
 tools/perf/util/thread-stack.h                     |   3 +
 tools/perf/util/thread.c                           |   1 +
 tools/perf/util/thread.h                           |   7 +-
 tools/perf/util/unwind-libdw.c                     |   2 +
 tools/perf/util/unwind-libunwind-local.c           |   1 +
Quoted 8 lines
 tools/perf/util/unwind-libunwind.c                 |   1 +
 tools/perf/util/vdso.c                             |   1 +
 119 files changed, 1399 insertions(+), 473 deletions(-)
 create mode 100644 tools/perf/util/cpu-set-sched.h
 delete mode 100644 tools/perf/util/drv_configs.c
 delete mode 100644 tools/perf/util/drv_configs.h
 create mode 100644 tools/perf/util/map_groups.h
 create mode 100644 tools/perf/util/map_symbol.h

Pulled, thanks a lot Arnaldo!

Ingo