Skip to contentSkip to conversation

batman-adv: netlink restructuring, part 2

PATCH New Sven Eckelmann 1 participant 20 messages Feb 9, 2019 Batman advanced

lore
Share & tools
lore

Sven Eckelmann

author maintainer
#0 lore raw

v5 cover batman-adv: netlink restructuring, part 2

Hi,

Jiri Pirko called the batman-adv configuration interface a while back "a huge mistake" [1] and suggested genl as alternative. The first reimplementation [2] (based on the team/devlink design) was rejected. This second implementation is now using a nl80211-like design. The objects which can now be modified/queried are:

* mesh/soft-interface (BATADV_CMD_GET_MESH/BATADV_CMD_SET_MESH)
* slave/hard-interface (BATADV_CMD_GET_HARDIF/BATADV_CMD_SET_HARDIF)
* vlan (BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN)

Such a set messages automatically triggers a *_SET_* "reply" via the config multicast group. The same behavior was also added to the sysfs interface.

Thanks to Linus and Simon for their feedback. The discussed changes were now integrated.

v5:
===

* renamed main functions to add attributes

- batadv_netlink_mesh_put_ap_isolation -> batadv_netlink_mesh_fill_ap_isolation
- batadv_netlink_mesh_put -> batadv_netlink_mesh_fill
- batadv_netlink_hardif_put -> batadv_netlink_hardif_fill
- batadv_netlink_vlan_put -> batadv_netlink_vlan_fill

* dropped attribute BATADV_ATTR_MULTICAST_MODE_ENABLED and replaced it with (basically inversed) BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED

v4:
===

Incorporate various feedback from

* Linus Luessing:

- Fix typos/spelling/grammar problems:

+ "already allow" -> "already allows"
+ "mesh mesh" -> "mesh"
+ "safed" -> "saved"

- Let batadv_get_softif_from_info actually return net_device instead of net_device private data (batadv_priv)
- store genl_info_net(info) in temporary variable to avoid line breaks in function parameters
- document that batadv_get_*_from_info functions increase the reference counter of the returned object
- directly drop reference counter to hard_dev net_device in batadv_get_hardif_from_info instead of doing that in batadv_post_doit
- fix NULL pointer deref of primary_if when batadv device doesn't have any slave device
- rewrite user_ptr[1] flags precheck in batadv_pre_doit to count the number of set bits (to only allow one of the flags which use user_ptr[1])

* Jiri Pirko:

- Add _ENABLED Postfix for boolean attributes:

+ BATADV_ATTR_AGGREGATED_OGMS_ENABLED
+ BATADV_ATTR_AP_ISOLATION_ENABLED
+ BATADV_ATTR_BONDING_ENABLED
+ BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED
+ BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED
+ BATADV_ATTR_FRAGMENTATION_ENABLED
+ BATADV_ATTR_MULTICAST_MODE_ENABLED
+ BATADV_ATTR_NETWORK_CODING_ENABLED

v3:
===

* correctly assign kernel-doc for BATADV_GW_MODE_CLIENT
* fix validation check for gw.sel_class
* fix setting of BATADV_ATTR_ORIG_INTERVAL
* Cc the (most likely) responsible developers for each setting to more directly ask them for feedback

v2:
===

* rewrite everything in a more nl80211-like message/attribute format.

Kind regards,
Sven

[1] https://www.open-mesh.org/issues/300
[2] https://patchwork.open-mesh.org/cover/17610/

Sven Eckelmann (19):
batman-adv: Move common genl doit code pre/post hooks
batman-adv: Prepare framework for mesh genl config
batman-adv: Prepare framework for hardif genl config
batman-adv: Prepare framework for vlan genl config
batman-adv: Add aggregated_ogms mesh genl configuration
batman-adv: Add ap_isolation mesh/vlan genl configuration
batman-adv: Add bonding mesh genl configuration
batman-adv: Add bridge_loop_avoidance mesh genl configuration
batman-adv: Add distributed_arp_table mesh genl configuration
batman-adv: Add fragmentation mesh genl configuration
batman-adv: Add gateway mesh genl configuration
batman-adv: Add hop_penalty mesh genl configuration
batman-adv: Add log_level mesh genl configuration
batman-adv: Add multicast forceflood mesh genl configuration
batman-adv: Add network_coding mesh genl configuration
batman-adv: Add orig_interval mesh genl configuration
batman-adv: Add elp_interval hardif genl configuration
batman-adv: Add throughput_override hardif genl configuration
batman-adv: Trigger genl notification on sysfs config change

 include/uapi/linux/batman_adv.h |  190 +++++-
 net/batman-adv/gateway_client.c |    1 -
 net/batman-adv/gateway_common.c |    1 +
 net/batman-adv/gateway_common.h |    6 -
 net/batman-adv/netlink.c        | 1080 +++++++++++++++++++++++++++----
 net/batman-adv/netlink.h        |    6 +
 net/batman-adv/soft-interface.c |    2 +-
 net/batman-adv/sysfs.c          |   64 +-
 8 files changed, 1203 insertions(+), 147 deletions(-)
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH v5 1/19 batman-adv: Move common genl doit code pre/post hooks

The commit ff4c92d85c6f ("genetlink: introduce pre_doit/post_doit hooks") intoduced a mechanism to run specific code for doit hooks before/after the hooks are run. Since all doit hooks are requiring the batadv softif, it should be retrieved/freed in these helpers to simplify the code.

Signed-off-by Sven Eckelmann <[email protected]>
---
 net/batman-adv/netlink.c | 143 +++++++++++++++++++++++++++------------
 1 file changed, 100 insertions(+), 43 deletions(-)
net/batman-adv/netlink.c +100 -43
index 5fe833cc..e56c40d1 100644
@@ -20,8 +20,10 @@
 #include "main.h"
 
 #include <linux/atomic.h>
+#include <linux/bitops.h>
 #include <linux/byteorder/generic.h>
 #include <linux/cache.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/export.h>
 #include <linux/genetlink.h>

@@ -54,6 +56,8 @@
 #include "tp_meter.h"
 #include "translation-table.h"
 
+struct net;
+
 struct genl_family batadv_netlink_family;
 
 /* multicast groups */

@@ -61,6 +65,18 @@ enum batadv_netlink_multicast_groups {
 	BATADV_NL_MCGRP_TPMETER,
 };
 
+/**
+ * enum batadv_genl_ops_flags - flags for genl_ops's internal_flags
+ */
+enum batadv_genl_ops_flags {
+	/**
+	 * @BATADV_FLAG_NEED_MESH: request requires valid soft interface in
+	 *  attribute BATADV_ATTR_MESH_IFINDEX and expects a pointer to it to be
+	 *  saved in info->user_ptr[0]
+	 */
+	BATADV_FLAG_NEED_MESH = BIT(0),
+};
+
 static const struct genl_multicast_group batadv_netlink_mcgrps[] = {
 	[BATADV_NL_MCGRP_TPMETER] = { .name = BATADV_NL_MCAST_GROUP_TPMETER },
 };

@@ -329,40 +345,24 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
 static int
 batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
 {
-	struct net *net = genl_info_net(info);
-	struct net_device *soft_iface;
-	struct batadv_priv *bat_priv;
+	struct batadv_priv *bat_priv = info->user_ptr[0];
 	struct sk_buff *msg = NULL;
 	u32 test_length;
 	void *msg_head;
-	int ifindex;
 	u32 cookie;
 	u8 *dst;
 	int ret;
 
-	if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
-		return -EINVAL;
-
 	if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
 		return -EINVAL;
 
 	if (!info->attrs[BATADV_ATTR_TPMETER_TEST_TIME])
 		return -EINVAL;
 
-	ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
-	if (!ifindex)
-		return -EINVAL;
-
 	dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
 
 	test_length = nla_get_u32(info->attrs[BATADV_ATTR_TPMETER_TEST_TIME]);
 
-	soft_iface = dev_get_by_index(net, ifindex);
-	if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
-		ret = -ENODEV;
-		goto out;
-	}
-
 	msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
 	if (!msg) {
 		ret = -ENOMEM;

@@ -377,15 +377,11 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
 		goto out;
 	}
 
-	bat_priv = netdev_priv(soft_iface);
 	batadv_tp_start(bat_priv, dst, test_length, &cookie);
 
 	ret = batadv_netlink_tp_meter_put(msg, cookie);
 
  out:
-	if (soft_iface)
-		dev_put(soft_iface);
-
 	if (ret) {
 		if (msg)
 			nlmsg_free(msg);

@@ -406,38 +402,17 @@ batadv_netlink_tp_meter_start(struct sk_buff *skb, struct genl_info *info)
 static int
 batadv_netlink_tp_meter_cancel(struct sk_buff *skb, struct genl_info *info)
 {
-	struct net *net = genl_info_net(info);
-	struct net_device *soft_iface;
-	struct batadv_priv *bat_priv;
-	int ifindex;
+	struct batadv_priv *bat_priv = info->user_ptr[0];
 	u8 *dst;
 	int ret = 0;
 
-	if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
-		return -EINVAL;
-
 	if (!info->attrs[BATADV_ATTR_ORIG_ADDRESS])
 		return -EINVAL;
 
-	ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
-	if (!ifindex)
-		return -EINVAL;
-
 	dst = nla_data(info->attrs[BATADV_ATTR_ORIG_ADDRESS]);
 
-	soft_iface = dev_get_by_index(net, ifindex);
-	if (!soft_iface || !batadv_softif_is_valid(soft_iface)) {
-		ret = -ENODEV;
-		goto out;
-	}
-
-	bat_priv = netdev_priv(soft_iface);
 	batadv_tp_stop(bat_priv, dst, BATADV_TP_REASON_CANCEL);
 
-out:
-	if (soft_iface)
-		dev_put(soft_iface);
-
 	return ret;
 }
 

@@ -545,6 +520,84 @@ batadv_netlink_dump_hardifs(struct sk_buff *msg, struct netlink_callback *cb)
 	return msg->len;
 }
 
+/**
+ * batadv_get_softif_from_info() - Retrieve soft interface from genl attributes
+ * @net: the applicable net namespace
+ * @info: receiver information
+ *
+ * Return: Pointer to soft interface (with increased refcnt) on success, error
+ *  pointer on error
+ */
+static struct net_device *
+batadv_get_softif_from_info(struct net *net, struct genl_info *info)
+{
+	struct net_device *soft_iface;
+	int ifindex;
+
+	if (!info->attrs[BATADV_ATTR_MESH_IFINDEX])
+		return ERR_PTR(-EINVAL);
+
+	ifindex = nla_get_u32(info->attrs[BATADV_ATTR_MESH_IFINDEX]);
+
+	soft_iface = dev_get_by_index(net, ifindex);
+	if (!soft_iface)
+		return ERR_PTR(-ENODEV);
+
+	if (!batadv_softif_is_valid(soft_iface))
+		goto err_put_softif;
+
+	return soft_iface;
+
+err_put_softif:
+	dev_put(soft_iface);
+
+	return ERR_PTR(-EINVAL);
+}
+
+/**
+ * batadv_pre_doit() - Prepare batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ *
+ * Return: 0 on success or negative error number in case of failure
+ */
+static int batadv_pre_doit(const struct genl_ops *ops, struct sk_buff *skb,
+			   struct genl_info *info)
+{
+	struct net *net = genl_info_net(info);
+	struct net_device *soft_iface;
+	struct batadv_priv *bat_priv;
+
+	if (ops->internal_flags & BATADV_FLAG_NEED_MESH) {
+		soft_iface = batadv_get_softif_from_info(net, info);
+		if (IS_ERR(soft_iface))
+			return PTR_ERR(soft_iface);
+
+		bat_priv = netdev_priv(soft_iface);
+		info->user_ptr[0] = bat_priv;
+	}
+
+	return 0;
+}
+
+/**
+ * batadv_post_doit() - End batman-adv genl doit request
+ * @ops: requested netlink operation
+ * @skb: Netlink message with request data
+ * @info: receiver information
+ */
+static void batadv_post_doit(const struct genl_ops *ops, struct sk_buff *skb,
+			     struct genl_info *info)
+{
+	struct batadv_priv *bat_priv;
+
+	if (ops->internal_flags & BATADV_FLAG_NEED_MESH && info->user_ptr[0]) {
+		bat_priv = info->user_ptr[0];
+		dev_put(bat_priv->soft_iface);
+	}
+}
+
 static const struct genl_ops batadv_netlink_ops[] = {
 	{
 		.cmd = BATADV_CMD_GET_MESH_INFO,

@@ -557,12 +610,14 @@ static const struct genl_ops batadv_netlink_ops[] = {
 		.flags = GENL_ADMIN_PERM,
 		.policy = batadv_netlink_policy,
 		.doit = batadv_netlink_tp_meter_start,
+		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_TP_METER_CANCEL,
 		.flags = GENL_ADMIN_PERM,
 		.policy = batadv_netlink_policy,
 		.doit = batadv_netlink_tp_meter_cancel,
+		.internal_flags = BATADV_FLAG_NEED_MESH,
 	},
 	{
 		.cmd = BATADV_CMD_GET_ROUTING_ALGOS,

@@ -639,6 +694,8 @@ struct genl_family batadv_netlink_family __ro_after_init = {
 	.version = 1,
 	.maxattr = BATADV_ATTR_MAX,
 	.netnsok = true,
+	.pre_doit = batadv_pre_doit,
+	.post_doit = batadv_post_doit,
 	.module = THIS_MODULE,
 	.ops = batadv_netlink_ops,
 	.n_ops = ARRAY_SIZE(batadv_netlink_ops),
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH v5 2/19 batman-adv: Prepare framework for mesh genl config

In reply to Sven Eckelmann

The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested.

The main objects for this configuration is the mesh/soft-interface object. Its actual object in memory already contains most of the available configuration settings. The genl interface reflects this by allowing to get/set it using the mesh specific commands.

The BATADV_CMD_GET_MESH_INFO (or short version BATADV_CMD_GET_MESH) is reused as get command because it already provides the content of other information from the mesh/soft-interface which are not yet configuration specific.

The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_MESH command message type that settings might have been changed and what the current values are.

Signed-off-by Sven Eckelmann <[email protected]>
---
 include/uapi/linux/batman_adv.h |  16 +++-
 net/batman-adv/netlink.c        | 160 +++++++++++++++++++-------------
 2 files changed, 111 insertions(+), 65 deletions(-)
include/uapi/linux/batman_adv.h +13 -3
index a28e76a7..b3394aac 100644
@@ -27,6 +27,7 @@
 
 #define BATADV_NL_NAME "batadv"
 
+#define BATADV_NL_MCAST_GROUP_CONFIG	"config"
 #define BATADV_NL_MCAST_GROUP_TPMETER	"tpmeter"
 
 /**

@@ -372,10 +373,14 @@ enum batadv_nl_commands {
 	BATADV_CMD_UNSPEC,
 
 	/**
-	 * @BATADV_CMD_GET_MESH_INFO: Query basic information about batman-adv
-	 * device
+	 * @BATADV_CMD_GET_MESH: Get attributes from softif/mesh
 	 */
-	BATADV_CMD_GET_MESH_INFO,
+	BATADV_CMD_GET_MESH,
+
+	/**
+	 * @BATADV_CMD_GET_MESH_INFO: Alias for @BATADV_CMD_GET_MESH
+	 */
+	BATADV_CMD_GET_MESH_INFO = BATADV_CMD_GET_MESH,
 
 	/**
 	 * @BATADV_CMD_TP_METER: Start a tp meter session

@@ -443,6 +448,11 @@ enum batadv_nl_commands {
 	 */
 	BATADV_CMD_GET_MCAST_FLAGS,
 
+	/**
+	 * @BATADV_CMD_SET_MESH: Set attributes for softif/mesh
+	 */
+	BATADV_CMD_SET_MESH,
+
 	/* add new commands above here */
 
 	/**
net/batman-adv/netlink.c +98 -62

240 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH v5 3/19 batman-adv: Prepare framework for hardif genl config

In reply to Sven Eckelmann

The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested.

Beside the mesh/soft-interface specific configuration, the slave/hard-interface have B.A.T.M.A.N. V specific configuration settings. The genl interface reflects this by allowing to get/set it using the hard-interface specific commands.

The BATADV_CMD_GET_HARDIFS (or short version BATADV_CMD_GET_HARDIF) is reused as get command because it already allow sto dump the content of other information from the slave/hard-interface which are not yet configuration specific.

The set command BATADV_CMD_SET_HARDIF will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_HARDIF command message type that settings might have been changed and what the current values are.

Signed-off-by Sven Eckelmann <[email protected]>
---
 include/uapi/linux/batman_adv.h |  16 ++-
 net/batman-adv/netlink.c        | 240 +++++++++++++++++++++++++++++---
 2 files changed, 233 insertions(+), 23 deletions(-)
include/uapi/linux/batman_adv.h +14 -2
index b3394aac..62456a08 100644
@@ -398,9 +398,15 @@ enum batadv_nl_commands {
 	BATADV_CMD_GET_ROUTING_ALGOS,
 
 	/**
-	 * @BATADV_CMD_GET_HARDIFS: Query list of hard interfaces
+	 * @BATADV_CMD_GET_HARDIF: Get attributes from a hardif of the
+	 *  current softif
 	 */
-	BATADV_CMD_GET_HARDIFS,
+	BATADV_CMD_GET_HARDIF,
+
+	/**
+	 * @BATADV_CMD_GET_HARDIFS: Alias for @BATADV_CMD_GET_HARDIF
+	 */
+	BATADV_CMD_GET_HARDIFS = BATADV_CMD_GET_HARDIF,
 
 	/**
 	 * @BATADV_CMD_GET_TRANSTABLE_LOCAL: Query list of local translations

@@ -453,6 +459,12 @@ enum batadv_nl_commands {
 	 */
 	BATADV_CMD_SET_MESH,
 
+	/**
+	 * @BATADV_CMD_SET_HARDIF: Set attributes for hardif of the
+	 *  current softif
+	 */
+	BATADV_CMD_SET_HARDIF,
+
 	/* add new commands above here */
 
 	/**
net/batman-adv/netlink.c +219 -21

343 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH v5 4/19 batman-adv: Prepare framework for vlan genl config

In reply to Sven Eckelmann

The batman-adv configuration interface was implemented solely using sysfs. This approach was condemned by non-batadv developers as "huge mistake". Instead a netlink/genl based implementation was suggested.

Beside the mesh/soft-interface specific configuration, the VLANs on top of the mesh/soft-interface have configuration settings. The genl interface reflects this by allowing to get/set it using the vlan specific commands BATADV_CMD_GET_VLAN/BATADV_CMD_SET_VLAN.

The set command BATADV_CMD_SET_MESH will also notify interested userspace listeners of the "config" mcast group using the BATADV_CMD_SET_VLAN command message type that settings might have been changed and what the current values are.

Signed-off-by Sven Eckelmann <[email protected]>
---
 include/uapi/linux/batman_adv.h |  17 +++
 net/batman-adv/netlink.c        | 191 +++++++++++++++++++++++++++++++-
 2 files changed, 206 insertions(+), 2 deletions(-)
include/uapi/linux/batman_adv.h +17 -0
index 62456a08..10f3cc34 100644
@@ -345,6 +345,11 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_MCAST_FLAGS_PRIV,
 
+	/**
+	 * @BATADV_ATTR_VLANID: VLAN id on top of soft interface
+	 */
+	BATADV_ATTR_VLANID,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**

@@ -465,6 +470,18 @@ enum batadv_nl_commands {
 	 */
 	BATADV_CMD_SET_HARDIF,
 
+	/**
+	 * @BATADV_CMD_GET_VLAN: Get attributes from a VLAN of the
+	 *  current softif
+	 */
+	BATADV_CMD_GET_VLAN,
+
+	/**
+	 * @BATADV_CMD_SET_VLAN: Set attributes for VLAN of the
+	 *  current softif
+	 */
+	BATADV_CMD_SET_VLAN,
+
 	/* add new commands above here */
 
 	/**
net/batman-adv/netlink.c +189 -2

259 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH v5 5/19 batman-adv: Add aggregated_ogms mesh genl configuration

In reply to Sven Eckelmann

The mesh interface can delay OGM messages to aggregate different ogms together in a single OGM packet.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_AGGREGATED_OGMS_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Marek Lindner <[email protected]>

---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 12 ++++++++++++
 2 files changed, 18 insertions(+)
include/uapi/linux/batman_adv.h +6 -0
index 10f3cc34..f8941e80 100644
@@ -350,6 +350,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_VLANID,
 
+	/**
+	 * @BATADV_ATTR_AGGREGATED_OGMS_ENABLED: whether the batman protocol
+	 *  messages of the mesh interface shall be aggregated or not.
+	 */
+	BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +12 -0
index d40913bb..82665dc2 100644
@@ -139,6 +139,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_MCAST_FLAGS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_MCAST_FLAGS_PRIV]		= { .type = NLA_U32 },
 	[BATADV_ATTR_VLANID]			= { .type = NLA_U16 },
+	[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**

@@ -214,6 +215,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 			goto nla_put_failure;
 	}
 
+	if (nla_put_u8(msg, BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
+		       !!atomic_read(&bat_priv->aggregated_ogms)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -296,6 +301,13 @@ static int batadv_netlink_get_mesh(struct sk_buff *skb, struct genl_info *info)
 static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 {
 	struct batadv_priv *bat_priv = info->user_ptr[0];
+	struct nlattr *attr;
+
+	if (info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_AGGREGATED_OGMS_ENABLED];
+
+		atomic_set(&bat_priv->aggregated_ogms, !!nla_get_u8(attr));
+	}
 
 	batadv_netlink_notify_mesh(bat_priv);
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH v5 6/19 batman-adv: Add ap_isolation mesh/vlan genl configuration

In reply to Sven Eckelmann

The mesh interface can drop messages between clients to implement a mesh-wide AP isolation.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH and BATADV_CMD_SET_VLAN/BATADV_CMD_GET_VLAN commands allow to set/get the configuration of this feature using the BATADV_ATTR_AP_ISOLATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

This feature also requires that skbuff which should be handled as isolated are marked. The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the mark/mask using the u32 attributes BATADV_ATTR_ISOLATION_MARK and BATADV_ATTR_ISOLATION_MASK.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Antonio Quartulli <[email protected]>

---
 include/uapi/linux/batman_adv.h | 19 +++++++
 net/batman-adv/netlink.c        | 89 +++++++++++++++++++++++++++++++++
 2 files changed, 108 insertions(+)
include/uapi/linux/batman_adv.h +19 -0
index f8941e80..a4dadafe 100644
@@ -356,6 +356,25 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_AGGREGATED_OGMS_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_AP_ISOLATION_ENABLED: whether the data traffic going
+	 *  from a wireless client to another wireless client will be silently
+	 *  dropped.
+	 */
+	BATADV_ATTR_AP_ISOLATION_ENABLED,
+
+	/**
+	 * @BATADV_ATTR_ISOLATION_MARK: the isolation mark which is used to
+	 *  classify clients as "isolated" by the Extended Isolation feature.
+	 */
+	BATADV_ATTR_ISOLATION_MARK,
+
+	/**
+	 * @BATADV_ATTR_ISOLATION_MASK: the isolation (bit)mask which is used to
+	 *  classify clients as "isolated" by the Extended Isolation feature.
+	 */
+	BATADV_ATTR_ISOLATION_MASK,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +89 -0

125 lines not on this page · raw message

Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH v5 7/19 batman-adv: Add bonding mesh genl configuration

In reply to Sven Eckelmann

The mesh interface can use multiple slave/hard-interface ports at the same time to transport the traffic to other nodes.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BONDING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by Sven Eckelmann <[email protected]>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 11 +++++++++++
 2 files changed, 17 insertions(+)
include/uapi/linux/batman_adv.h +6 -0
index a4dadafe..f74ff261 100644
@@ -375,6 +375,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_ISOLATION_MASK,
 
+	/**
+	 * @BATADV_ATTR_BONDING_ENABLED: whether the data traffic going through
+	 *  the mesh will be sent using multiple interfaces at the same time.
+	 */
+	BATADV_ATTR_BONDING_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +11 -0
index fc80f003..310a2c33 100644
@@ -143,6 +143,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_AP_ISOLATION_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_ISOLATION_MARK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_ISOLATION_MASK]		= { .type = NLA_U32 },
+	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
 };
 
 /**

@@ -279,6 +280,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 			bat_priv->isolation_mark_mask))
 		goto nla_put_failure;
 
+	if (nla_put_u8(msg, BATADV_ATTR_BONDING_ENABLED,
+		       !!atomic_read(&bat_priv->bonding)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -387,6 +392,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		bat_priv->isolation_mark_mask = nla_get_u32(attr);
 	}
 
+	if (info->attrs[BATADV_ATTR_BONDING_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_BONDING_ENABLED];
+
+		atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH v5 8/19 batman-adv: Add bridge_loop_avoidance mesh genl configuration

In reply to Sven Eckelmann

The mesh interface can try to detect loops in the same mesh caused by (indirectly) bridged mesh/soft-interfaces of different nodes. Some of the loops can also be resolved without breaking the mesh.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by Sven Eckelmann <[email protected]>
---
 include/uapi/linux/batman_adv.h |  7 +++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 24 insertions(+)
include/uapi/linux/batman_adv.h +7 -0
index f74ff261..3cb35c66 100644
@@ -381,6 +381,13 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_BONDING_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED: whether the bridge loop
+	 *  avoidance feature is enabled. This feature detects and avoids loops
+	 *  between the mesh and devices bridged with the soft interface
+	 */
+	BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +17 -0
index 310a2c33..40c940da 100644
@@ -144,6 +144,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_ISOLATION_MARK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_ISOLATION_MASK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
+	[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**

@@ -284,6 +285,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		       !!atomic_read(&bat_priv->bonding)))
 		goto nla_put_failure;
 
+#ifdef CONFIG_BATMAN_ADV_BLA
+	if (nla_put_u8(msg, BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
+		       !!atomic_read(&bat_priv->bridge_loop_avoidance)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -398,6 +405,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->bonding, !!nla_get_u8(attr));
 	}
 
+#ifdef CONFIG_BATMAN_ADV_BLA
+	if (info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED];
+
+		atomic_set(&bat_priv->bridge_loop_avoidance,
+			   !!nla_get_u8(attr));
+		batadv_bla_status_update(bat_priv->soft_iface);
+	}
+#endif /* CONFIG_BATMAN_ADV_BLA */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH v5 9/19 batman-adv: Add distributed_arp_table mesh genl configuration

In reply to Sven Eckelmann

The mesh interface can use a distributed hash table to answer ARP requests without flooding the request through the whole mesh.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Antonio Quartulli <[email protected]>

---
 include/uapi/linux/batman_adv.h |  8 ++++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 25 insertions(+)
include/uapi/linux/batman_adv.h +8 -0
index 3cb35c66..f303a149 100644
@@ -388,6 +388,14 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED: whether the distributed
+	 *  arp table feature is enabled. This feature uses a distributed hash
+	 *  table to answer ARP requests without flooding the request through
+	 *  the whole mesh.
+	 */
+	BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +17 -0
index 40c940da..3028c2a5 100644
@@ -145,6 +145,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_ISOLATION_MASK]		= { .type = NLA_U32 },
 	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
 	[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**

@@ -291,6 +292,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_BLA */
 
+#ifdef CONFIG_BATMAN_ADV_DAT
+	if (nla_put_u8(msg, BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
+		       !!atomic_read(&bat_priv->distributed_arp_table)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -415,6 +422,16 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_BLA */
 
+#ifdef CONFIG_BATMAN_ADV_DAT
+	if (info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED];
+
+		atomic_set(&bat_priv->distributed_arp_table,
+			   !!nla_get_u8(attr));
+		batadv_dat_status_update(bat_priv->soft_iface);
+	}
+#endif /* CONFIG_BATMAN_ADV_DAT */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH v5 10/19 batman-adv: Add fragmentation mesh genl configuration

In reply to Sven Eckelmann

The mesh interface can fragment unicast packets when the packet size exceeds the outgoing slave/hard-interface MTU.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_FRAGMENTATION_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Andreas Langer <[email protected]>
Cc: Martin Hundeboll <[email protected]>
Cc: Marek Lindner <[email protected]>

---
 include/uapi/linux/batman_adv.h |  7 +++++++
 net/batman-adv/netlink.c        | 12 ++++++++++++
 2 files changed, 19 insertions(+)
include/uapi/linux/batman_adv.h +7 -0
index f303a149..847841b8 100644
@@ -396,6 +396,13 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_FRAGMENTATION_ENABLED: whether the data traffic going
+	 *  through the mesh will be fragmented or silently discarded if the
+	 *  packet size exceeds the outgoing interface MTU.
+	 */
+	BATADV_ATTR_FRAGMENTATION_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +12 -0
index 3028c2a5..5b2160d2 100644
@@ -146,6 +146,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_BONDING_ENABLED]		= { .type = NLA_U8 },
 	[BATADV_ATTR_BRIDGE_LOOP_AVOIDANCE_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_DISTRIBUTED_ARP_TABLE_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_FRAGMENTATION_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**

@@ -298,6 +299,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_DAT */
 
+	if (nla_put_u8(msg, BATADV_ATTR_FRAGMENTATION_ENABLED,
+		       !!atomic_read(&bat_priv->fragmentation)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -432,6 +437,13 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_DAT */
 
+	if (info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_FRAGMENTATION_ENABLED];
+
+		atomic_set(&bat_priv->fragmentation, !!nla_get_u8(attr));
+		batadv_update_min_mtu(bat_priv->soft_iface);
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH v5 11/19 batman-adv: Add gateway mesh genl configuration

In reply to Sven Eckelmann

The mesh/soft-interface can optimize the handling of DHCP packets. Instead of flooding them through the whole mesh, it can be forwarded as unicast to a specific gateway server. The originator which injects the packets in the mesh has to select (based on sel_class thresholds) a responsible gateway server. This is done by switching this originator to the gw_mode client. The servers announce their forwarding bandwidth (download/upload) when the gw_mode server was selected.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the attributes:

* u8 BATADV_ATTR_GW_MODE (0 == off, 1 == client, 2 == server)
* u32 BATADV_ATTR_GW_BANDWIDTH_DOWN (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_BANDWIDTH_UP (in 100 kbit/s steps)
* u32 BATADV_ATTR_GW_SEL_CLASS

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Marek Lindner <[email protected]>
Cc: Antonio Quartulli <[email protected]>

---
 include/uapi/linux/batman_adv.h | 40 ++++++++++++++
 net/batman-adv/gateway_client.c |  1 -
 net/batman-adv/gateway_common.c |  1 +
 net/batman-adv/gateway_common.h |  6 ---
 net/batman-adv/netlink.c        | 92 +++++++++++++++++++++++++++++++++
 net/batman-adv/soft-interface.c |  2 +-
 net/batman-adv/sysfs.c          |  1 +
 7 files changed, 135 insertions(+), 8 deletions(-)
include/uapi/linux/batman_adv.h +40 -0
index 847841b8..165272be 100644
@@ -139,6 +139,20 @@ enum batadv_mcast_flags_priv {
 	BATADV_MCAST_FLAGS_QUERIER_IPV6_SHADOWING	= (1 << 4),
 };
 
+/**
+ * enum batadv_gw_modes - gateway mode of node
+ */
+enum batadv_gw_modes {
+	/** @BATADV_GW_MODE_OFF: gw mode disabled */
+	BATADV_GW_MODE_OFF,
+
+	/** @BATADV_GW_MODE_CLIENT: send DHCP requests to gw servers */
+	BATADV_GW_MODE_CLIENT,
+
+	/** @BATADV_GW_MODE_SERVER: announce itself as gatway server */
+	BATADV_GW_MODE_SERVER,
+};
+
 /**
  * enum batadv_nl_attrs - batman-adv netlink attributes
  */

@@ -403,6 +417,32 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_FRAGMENTATION_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_GW_BANDWIDTH_DOWN: defines the download bandwidth which
+	 *  is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+	 *  to 'server'.
+	 */
+	BATADV_ATTR_GW_BANDWIDTH_DOWN,
+
+	/**
+	 * @BATADV_ATTR_GW_BANDWIDTH_UP: defines the upload bandwidth which
+	 *  is propagated by this node if %BATADV_ATTR_GW_BANDWIDTH_MODE was set
+	 *  to 'server'.
+	 */
+	BATADV_ATTR_GW_BANDWIDTH_UP,
+
+	/**
+	 * @BATADV_ATTR_GW_MODE: defines the state of the gateway features.
+	 * Possible values are specified in enum batadv_gw_modes
+	 */
+	BATADV_ATTR_GW_MODE,
+
+	/**
+	 * @BATADV_ATTR_GW_SEL_CLASS: defines the selection criteria this node
+	 *  will use to choose a gateway if gw_mode was set to 'client'.
+	 */
+	BATADV_ATTR_GW_SEL_CLASS,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/gateway_client.c +0 -1
index 0a6b9b30..f5811f61 100644
@@ -47,7 +47,6 @@
 #include <uapi/linux/batadv_packet.h>
 #include <uapi/linux/batman_adv.h>
 
-#include "gateway_common.h"
 #include "hard-interface.h"
 #include "log.h"
 #include "netlink.h"
net/batman-adv/gateway_common.c +1 -0
index 53d03adc..e064de45 100644
@@ -28,6 +28,7 @@
 #include <linux/stddef.h>
 #include <linux/string.h>
 #include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
 
 #include "gateway_client.h"
 #include "log.h"
net/batman-adv/gateway_common.h +0 -6
index 89bae100..128467a0 100644
@@ -25,12 +25,6 @@
 
 struct net_device;
 
-enum batadv_gw_modes {
-	BATADV_GW_MODE_OFF,
-	BATADV_GW_MODE_CLIENT,
-	BATADV_GW_MODE_SERVER,
-};
-
 /**
  * enum batadv_bandwidth_units - bandwidth unit types
  */
net/batman-adv/netlink.c +92 -0

116 lines not on this page · raw message

net/batman-adv/soft-interface.c +1 -1
index 93a5975c..5cb4a2f5 100644
@@ -50,13 +50,13 @@
 #include <linux/string.h>
 #include <linux/types.h>
 #include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
 
 #include "bat_algo.h"
 #include "bridge_loop_avoidance.h"
 #include "debugfs.h"
 #include "distributed-arp-table.h"
 #include "gateway_client.h"
-#include "gateway_common.h"
 #include "hard-interface.h"
 #include "multicast.h"
 #include "network-coding.h"
net/batman-adv/sysfs.c +1 -0
index e1b81626..64fd5932 100644
@@ -40,6 +40,7 @@
 #include <linux/stringify.h>
 #include <linux/workqueue.h>
 #include <uapi/linux/batadv_packet.h>
+#include <uapi/linux/batman_adv.h>
 
 #include "bridge_loop_avoidance.h"
 #include "distributed-arp-table.h"
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH v5 12/19 batman-adv: Add hop_penalty mesh genl configuration

In reply to Sven Eckelmann

The TQ (B.A.T.M.A.N. IV) and throughput values (B.A.T.M.A.N. V) are reduced when they are forwarded. One of the reductions is the penalty for traversing an additional hop. This hop_penalty (0-255) defines the percentage of reduction (0-100%).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u8 BATADV_ATTR_HOP_PENALTY attribute.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Marek Lindner <[email protected]>
Cc: Antonio Quartulli <[email protected]>

---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 11 +++++++++++
 2 files changed, 17 insertions(+)
include/uapi/linux/batman_adv.h +6 -0
index 165272be..b37cb923 100644
@@ -443,6 +443,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_GW_SEL_CLASS,
 
+	/**
+	 * @BATADV_ATTR_HOP_PENALTY: defines the penalty which will be applied
+	 *  to an originator message's tq-field on every hop.
+	 */
+	BATADV_ATTR_HOP_PENALTY,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +11 -0
index 473467af..ce6e6f07 100644
@@ -152,6 +152,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_BANDWIDTH_UP]		= { .type = NLA_U32 },
 	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
+	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
 };
 
 /**

@@ -330,6 +331,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 			goto nla_put_failure;
 	}
 
+	if (nla_put_u8(msg, BATADV_ATTR_HOP_PENALTY,
+		       atomic_read(&bat_priv->hop_penalty)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -536,6 +541,12 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		}
 	}
 
+	if (info->attrs[BATADV_ATTR_HOP_PENALTY]) {
+		attr = info->attrs[BATADV_ATTR_HOP_PENALTY];
+
+		atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#13 lore raw

PATCH v5 13/19 batman-adv: Add log_level mesh genl configuration

In reply to Sven Eckelmann

In contrast to other modules, batman-adv allows to set the debug message verbosity per mesh/soft-interface and not per module (via modparam).

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 (bitmask) BATADV_ATTR_LOG_LEVEL attribute.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Marek Lindner <[email protected]>

---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)
include/uapi/linux/batman_adv.h +6 -0
index b37cb923..6d36e4b4 100644
@@ -449,6 +449,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_HOP_PENALTY,
 
+	/**
+	 * @BATADV_ATTR_LOG_LEVEL: bitmask with to define which debug messages
+	 *  should be send to the debug log/trace ring buffer
+	 */
+	BATADV_ATTR_LOG_LEVEL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +17 -0
index ce6e6f07..8c019d46 100644
@@ -53,6 +53,7 @@
 #include "gateway_client.h"
 #include "gateway_common.h"
 #include "hard-interface.h"
+#include "log.h"
 #include "multicast.h"
 #include "originator.h"
 #include "soft-interface.h"

@@ -153,6 +154,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_MODE]			= { .type = NLA_U8 },
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
+	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 };
 
 /**

@@ -335,6 +337,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		       atomic_read(&bat_priv->hop_penalty)))
 		goto nla_put_failure;
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (nla_put_u32(msg, BATADV_ATTR_LOG_LEVEL,
+			atomic_read(&bat_priv->log_level)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -547,6 +555,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 		atomic_set(&bat_priv->hop_penalty, nla_get_u8(attr));
 	}
 
+#ifdef CONFIG_BATMAN_ADV_DEBUG
+	if (info->attrs[BATADV_ATTR_LOG_LEVEL]) {
+		attr = info->attrs[BATADV_ATTR_LOG_LEVEL];
+
+		atomic_set(&bat_priv->log_level,
+			   nla_get_u32(attr) & BATADV_DBG_ALL);
+	}
+#endif /* CONFIG_BATMAN_ADV_DEBUG */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#14 lore raw

PATCH v5 14/19 batman-adv: Add multicast forceflood mesh genl configuration

In reply to Sven Eckelmann

The mesh interface can optimize the flooding of multicast packets based on the content of the global translation tables. To disable this behavior and use the broadcast-like flooding of the packets, forceflood has to be enabled.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED attribute. Setting the u8 to zero will disable this feature (allowing multicast optimizations) and setting it to something else is enabling this feature (forcing simple flooding).

Signed-off-by Sven Eckelmann <[email protected]>
---
 include/uapi/linux/batman_adv.h |  9 +++++++++
 net/batman-adv/netlink.c        | 15 +++++++++++++++
 2 files changed, 24 insertions(+)
include/uapi/linux/batman_adv.h +9 -0
index 6d36e4b4..38caaaae 100644
@@ -455,6 +455,15 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_LOG_LEVEL,
 
+	/**
+	 * @BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED: whether multicast
+	 *  optimizations should be replaced by simple broadcast-like flooding
+	 *  of multicast packets. If set to non-zero then all nodes in the mesh
+	 *  are going to use classic flooding for any multicast packet with no
+	 *  optimizations.
+	 */
+	BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +15 -0
index 8c019d46..475bd15f 100644
@@ -155,6 +155,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_GW_SEL_CLASS]		= { .type = NLA_U32 },
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
 	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
+	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**

@@ -343,6 +344,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_DEBUG */
 
+#ifdef CONFIG_BATMAN_ADV_MCAST
+	if (nla_put_u8(msg, BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
+		       !atomic_read(&bat_priv->multicast_mode)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -564,6 +571,14 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_DEBUG */
 
+#ifdef CONFIG_BATMAN_ADV_MCAST
+	if (info->attrs[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED];
+
+		atomic_set(&bat_priv->multicast_mode, !nla_get_u8(attr));
+	}
+#endif /* CONFIG_BATMAN_ADV_MCAST */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#15 lore raw

PATCH v5 15/19 batman-adv: Add network_coding mesh genl configuration

In reply to Sven Eckelmann

The mesh interface can use (in an homogeneous mesh) network coding, a mechanism that aims to increase the overall network throughput by fusing multiple packets in one transmission.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the BATADV_ATTR_NETWORK_CODING_ENABLED attribute. Setting the u8 to zero will disable this feature and setting it to something else is enabling this feature.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Martin Hundeboll <[email protected]>
Cc: Marek Lindner <[email protected]>

---
 include/uapi/linux/batman_adv.h |  7 +++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 24 insertions(+)
include/uapi/linux/batman_adv.h +7 -0
index 38caaaae..a4239c14 100644
@@ -464,6 +464,13 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_NETWORK_CODING_ENABLED: whether Network Coding (using
+	 *  some magic to send fewer wifi packets but still the same content) is
+	 *  enabled or not.
+	 */
+	BATADV_ATTR_NETWORK_CODING_ENABLED,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +17 -0
index 475bd15f..6f01f92e 100644
@@ -55,6 +55,7 @@
 #include "hard-interface.h"
 #include "log.h"
 #include "multicast.h"
+#include "network-coding.h"
 #include "originator.h"
 #include "soft-interface.h"
 #include "tp_meter.h"

@@ -156,6 +157,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_HOP_PENALTY]		= { .type = NLA_U8 },
 	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
 };
 
 /**

@@ -350,6 +352,12 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_MCAST */
 
+#ifdef CONFIG_BATMAN_ADV_NC
+	if (nla_put_u8(msg, BATADV_ATTR_NETWORK_CODING_ENABLED,
+		       !!atomic_read(&bat_priv->network_coding)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_NC */
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -579,6 +587,15 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_MCAST */
 
+#ifdef CONFIG_BATMAN_ADV_NC
+	if (info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED]) {
+		attr = info->attrs[BATADV_ATTR_NETWORK_CODING_ENABLED];
+
+		atomic_set(&bat_priv->network_coding, !!nla_get_u8(attr));
+		batadv_nc_status_update(bat_priv->soft_iface);
+	}
+#endif /* CONFIG_BATMAN_ADV_NC */
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#16 lore raw

PATCH v5 16/19 batman-adv: Add orig_interval mesh genl configuration

In reply to Sven Eckelmann

The OGM packets are transmitted every orig_interval milliseconds. This value can be changed using the configuration interface.

The BATADV_CMD_SET_MESH/BATADV_CMD_GET_MESH commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ORIG_INTERVAL attribute.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Marek Lindner <[email protected]>

---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)
include/uapi/linux/batman_adv.h +6 -0
index a4239c14..6bedd488 100644
@@ -471,6 +471,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_NETWORK_CODING_ENABLED,
 
+	/**
+	 * @BATADV_ATTR_ORIG_INTERVAL: defines the interval in milliseconds in
+	 *  which batman sends its protocol messages.
+	 */
+	BATADV_ATTR_ORIG_INTERVAL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +17 -0
index 6f01f92e..e25c139b 100644
@@ -158,6 +158,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_LOG_LEVEL]			= { .type = NLA_U32 },
 	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
+	[BATADV_ATTR_ORIG_INTERVAL]		= { .type = NLA_U32 },
 };
 
 /**

@@ -358,6 +359,10 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
 		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_NC */
 
+	if (nla_put_u32(msg, BATADV_ATTR_ORIG_INTERVAL,
+			atomic_read(&bat_priv->orig_interval)))
+		goto nla_put_failure;
+
 	if (primary_if)
 		batadv_hardif_put(primary_if);
 

@@ -596,6 +601,18 @@ static int batadv_netlink_set_mesh(struct sk_buff *skb, struct genl_info *info)
 	}
 #endif /* CONFIG_BATMAN_ADV_NC */
 
+	if (info->attrs[BATADV_ATTR_ORIG_INTERVAL]) {
+		u32 orig_interval;
+
+		attr = info->attrs[BATADV_ATTR_ORIG_INTERVAL];
+		orig_interval = nla_get_u32(attr);
+
+		orig_interval = min_t(u32, orig_interval, INT_MAX);
+		orig_interval = max_t(u32, orig_interval, 2 * BATADV_JITTER);
+
+		atomic_set(&bat_priv->orig_interval, orig_interval);
+	}
+
 	batadv_netlink_notify_mesh(bat_priv);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#17 lore raw

PATCH v5 17/19 batman-adv: Add elp_interval hardif genl configuration

In reply to Sven Eckelmann

The ELP packets are transmitted every elp_interval milliseconds on an slave/hard-interface. This value can be changed using the configuration interface.

The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_ELP_INTERVAL attribute.

Signed-off-by Sven Eckelmann <[email protected]>
---
 include/uapi/linux/batman_adv.h |  6 ++++++
 net/batman-adv/netlink.c        | 17 +++++++++++++++++
 2 files changed, 23 insertions(+)
include/uapi/linux/batman_adv.h +6 -0
index 6bedd488..f966e497 100644
@@ -477,6 +477,12 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_ORIG_INTERVAL,
 
+	/**
+	 * @BATADV_ATTR_ELP_INTERVAL: defines the interval in milliseconds in
+	 *  which batman emits probing packets for neighbor sensing (ELP).
+	 */
+	BATADV_ATTR_ELP_INTERVAL,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +17 -0
index e25c139b..09187e6e 100644
@@ -159,6 +159,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_MULTICAST_FORCEFLOOD_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_ORIG_INTERVAL]		= { .type = NLA_U32 },
+	[BATADV_ATTR_ELP_INTERVAL]		= { .type = NLA_U32 },
 };
 
 /**

@@ -825,6 +826,12 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg,
 			goto nla_put_failure;
 	}
 
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+	if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
+			atomic_read(&hard_iface->bat_v.elp_interval)))
+		goto nla_put_failure;
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
 	genlmsg_end(msg, hdr);
 	return 0;
 

@@ -910,6 +917,16 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
 	struct batadv_hard_iface *hard_iface = info->user_ptr[1];
 	struct batadv_priv *bat_priv = info->user_ptr[0];
 
+#ifdef CONFIG_BATMAN_ADV_BATMAN_V
+	struct nlattr *attr;
+
+	if (info->attrs[BATADV_ATTR_ELP_INTERVAL]) {
+		attr = info->attrs[BATADV_ATTR_ELP_INTERVAL];
+
+		atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
+	}
+#endif /* CONFIG_BATMAN_ADV_BATMAN_V */
+
 	batadv_netlink_notify_hardif(bat_priv, hard_iface);
 
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#18 lore raw

PATCH v5 18/19 batman-adv: Add throughput_override hardif genl configuration

In reply to Sven Eckelmann

The B.A.T.M.A.N. V implementation tries to estimate the link throughput of an interface to an originator using different automatic methods. It is still possible to overwrite it the link throughput for all reachable originators via this interface.

The BATADV_CMD_SET_HARDIF/BATADV_CMD_GET_HARDIF commands allow to set/get the configuration of this feature using the u32 BATADV_ATTR_THROUGHPUT_OVERRIDE attribute. The used unit is in 100 Kbit/s. If the value is set to 0 then batman-adv will try to estimate the throughput by itself.

Signed-off-by Sven Eckelmann <[email protected]>

---
Cc: Antonio Quartulli <[email protected]>

---
 include/uapi/linux/batman_adv.h |  8 ++++++++
 net/batman-adv/netlink.c        | 12 ++++++++++++
 2 files changed, 20 insertions(+)
include/uapi/linux/batman_adv.h +8 -0
index f966e497..305bf316 100644
@@ -483,6 +483,14 @@ enum batadv_nl_attrs {
 	 */
 	BATADV_ATTR_ELP_INTERVAL,
 
+	/**
+	 * @BATADV_ATTR_THROUGHPUT_OVERRIDE: defines the throughput value to be
+	 *  used by B.A.T.M.A.N. V when estimating the link throughput using
+	 *  this interface. If the value is set to 0 then batman-adv will try to
+	 *  estimate the throughput by itself.
+	 */
+	BATADV_ATTR_THROUGHPUT_OVERRIDE,
+
 	/* add attributes above here, update the policy in netlink.c */
 
 	/**
net/batman-adv/netlink.c +12 -0
index 09187e6e..476b4c60 100644
@@ -160,6 +160,7 @@ static const struct nla_policy batadv_netlink_policy[NUM_BATADV_ATTR] = {
 	[BATADV_ATTR_NETWORK_CODING_ENABLED]	= { .type = NLA_U8 },
 	[BATADV_ATTR_ORIG_INTERVAL]		= { .type = NLA_U32 },
 	[BATADV_ATTR_ELP_INTERVAL]		= { .type = NLA_U32 },
+	[BATADV_ATTR_THROUGHPUT_OVERRIDE]	= { .type = NLA_U32 },
 };
 
 /**

@@ -830,6 +831,10 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg,
 	if (nla_put_u32(msg, BATADV_ATTR_ELP_INTERVAL,
 			atomic_read(&hard_iface->bat_v.elp_interval)))
 		goto nla_put_failure;
+
+	if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT_OVERRIDE,
+			atomic_read(&hard_iface->bat_v.throughput_override)))
+		goto nla_put_failure;
 #endif /* CONFIG_BATMAN_ADV_BATMAN_V */
 
 	genlmsg_end(msg, hdr);

@@ -925,6 +930,13 @@ static int batadv_netlink_set_hardif(struct sk_buff *skb,
 
 		atomic_set(&hard_iface->bat_v.elp_interval, nla_get_u32(attr));
 	}
+
+	if (info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE]) {
+		attr = info->attrs[BATADV_ATTR_THROUGHPUT_OVERRIDE];
+
+		atomic_set(&hard_iface->bat_v.throughput_override,
+			   nla_get_u32(attr));
+	}
 #endif /* CONFIG_BATMAN_ADV_BATMAN_V */
 
 	batadv_netlink_notify_hardif(bat_priv, hard_iface);
Signature · 1 line
2.20.1
author maintainer
#19 lore raw

PATCH v5 19/19 batman-adv: Trigger genl notification on sysfs config change

In reply to Sven Eckelmann

The generic netlink code is expected to trigger notification messages when configuration might have been changed. But the configuration of batman-adv is most of the time still done using sysfs. So the sysfs interface should also trigger the corresponding netlink messages via the "config" multicast group.

Signed-off-by Sven Eckelmann <[email protected]>
---
 net/batman-adv/netlink.c | 10 +++----
 net/batman-adv/netlink.h |  6 ++++
 net/batman-adv/sysfs.c   | 63 +++++++++++++++++++++++++++++++++-------
 3 files changed, 63 insertions(+), 16 deletions(-)
net/batman-adv/netlink.c +5 -5
index 476b4c60..67a58da2 100644
@@ -385,7 +385,7 @@ static int batadv_netlink_mesh_fill(struct sk_buff *msg,
  *
  * Return: 0 on success, < 0 on error
  */
-static int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv)
 {
 	struct sk_buff *msg;
 	int ret;

@@ -852,8 +852,8 @@ static int batadv_netlink_hardif_fill(struct sk_buff *msg,
  *
  * Return: 0 on success, < 0 on error
  */
-static int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
-					struct batadv_hard_iface *hard_iface)
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+				 struct batadv_hard_iface *hard_iface)
 {
 	struct sk_buff *msg;
 	int ret;

@@ -1057,8 +1057,8 @@ static int batadv_netlink_vlan_fill(struct sk_buff *msg,
  *
  * Return: 0 on success, < 0 on error
  */
-static int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
-				      struct batadv_softif_vlan *vlan)
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+			       struct batadv_softif_vlan *vlan)
 {
 	struct sk_buff *msg;
 	int ret;
net/batman-adv/netlink.h +6 -0
index 216484b8..72733685 100644
@@ -34,6 +34,12 @@ int batadv_netlink_tpmeter_notify(struct batadv_priv *bat_priv, const u8 *dst,
 				  u8 result, u32 test_time, u64 total_bytes,
 				  u32 cookie);
 
+int batadv_netlink_notify_mesh(struct batadv_priv *bat_priv);
+int batadv_netlink_notify_hardif(struct batadv_priv *bat_priv,
+				 struct batadv_hard_iface *hard_iface);
+int batadv_netlink_notify_vlan(struct batadv_priv *bat_priv,
+			       struct batadv_softif_vlan *vlan);
+
 extern struct genl_family batadv_netlink_family;
 
 #endif /* _NET_BATMAN_ADV_NETLINK_H_ */
net/batman-adv/sysfs.c +52 -11

148 lines not on this page · raw message

Signature · 1 line
2.20.1