regulator: lp8788-buck: Convert to linear range
PATCH 1/1 regulator: lp8788-buck: Convert to linear range
linear range is suitable for this driver, let's convert it to linear range.
Signed-off-by Axel Lin <[email protected]>
--- drivers/regulator/lp8788-buck.c | 38 +++++++++++++++++---------------- 1 file changed, 20 insertions(+), 18 deletions(-)
drivers/regulator/lp8788-buck.c +20 -18
@@ -95,12 +95,10 @@ struct lp8788_buck {void *dvs; }; -/* BUCK 1 ~ 4 voltage table */ -static const int lp8788_buck_vtbl[] = { -500000 ,800000 ,850000 ,900000 ,950000 ,1000000 ,1050000 ,1100000 , -1150000 ,1200000 ,1250000 ,1300000 ,1350000 ,1400000 ,1450000 ,1500000 , -1550000 ,1600000 ,1650000 ,1700000 ,1750000 ,1800000 ,1850000 ,1900000 , -1950000 ,2000000 , +/* BUCK 1 ~ 4 voltage ranges */ +static const struct regulator_linear_range buck_volt_ranges[] = { +REGULATOR_LINEAR_RANGE (500000 ,0 ,0 ,0 ), +REGULATOR_LINEAR_RANGE (800000 ,1 ,25 ,50000 ), };static void lp8788_buck1_set_dvs (struct lp8788_buck *buck)
@@ -345,8 +343,8 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev) }static const struct regulator_ops lp8788_buck12_ops = { - .list_voltage = regulator_list_voltage_table, - .map_voltage = regulator_map_voltage_ascend, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, .set_voltage_sel = lp8788_buck12_set_voltage_sel, .get_voltage_sel = lp8788_buck12_get_voltage_sel, .enable = regulator_enable_regmap,
@@ -358,8 +356,8 @@ static const struct regulator_ops lp8788_buck12_ops = { };static const struct regulator_ops lp8788_buck34_ops = { - .list_voltage = regulator_list_voltage_table, - .map_voltage = regulator_map_voltage_ascend, + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .enable = regulator_enable_regmap,
@@ -375,8 +373,9 @@ static const struct regulator_desc lp8788_buck_desc[] = { .name = "buck1", .id = BUCK1, .ops = &lp8788_buck12_ops, - .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), - .volt_table = lp8788_buck_vtbl, + .n_voltages = 26, + .linear_ranges = buck_volt_ranges, + .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges), .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_BUCK,
@@ -386,8 +385,9 @@ static const struct regulator_desc lp8788_buck_desc[] = { .name = "buck2", .id = BUCK2, .ops = &lp8788_buck12_ops, - .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), - .volt_table = lp8788_buck_vtbl, + .n_voltages = 26, + .linear_ranges = buck_volt_ranges, + .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges), .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .enable_reg = LP8788_EN_BUCK,
@@ -397,8 +397,9 @@ static const struct regulator_desc lp8788_buck_desc[] = { .name = "buck3", .id = BUCK3, .ops = &lp8788_buck34_ops, - .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), - .volt_table = lp8788_buck_vtbl, + .n_voltages = 26, + .linear_ranges = buck_volt_ranges, + .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges), .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .vsel_reg = LP8788_BUCK3_VOUT,
@@ -410,8 +411,9 @@ static const struct regulator_desc lp8788_buck_desc[] = { .name = "buck4", .id = BUCK4, .ops = &lp8788_buck34_ops, - .n_voltages = ARRAY_SIZE(lp8788_buck_vtbl), - .volt_table = lp8788_buck_vtbl, + .n_voltages = 26, + .linear_ranges = buck_volt_ranges, + .n_linear_ranges = ARRAY_SIZE(buck_volt_ranges), .type = REGULATOR_VOLTAGE, .owner = THIS_MODULE, .vsel_reg = LP8788_BUCK4_VOUT,
Signature · 1 line
2.17.1