Skip to contentSkip to conversation

Add USB boot to HS DRA7xx/AM57xx

PATCH New Andrew F. Davis 2 participants 11 messages Jan 28, 2019 – Feb 10, 2019

lore
Share & tools
lore
#0 lore raw

v4 cover Add USB boot to HS DRA7xx/AM57xx

Hello all,

This series adds USB boot support to HS DRA7xx/AM57xx platforms.

Thanks,
Andrew

Changes from v3:
- Rebase on upstream
- Sync defconfigs

Changes from v2:
- Only use ISW_ENTRY_ADDR for system with a set default

Changes from v1:
- Drop explicit UART boot support from DRA7xx as this cannot be tested

Andrew F. Davis (5):
defconfigs: dra7xx_hs_evm: Sync HS and non-HS defconfigs
defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs
defconfigs: Add config for DRA7xx High Security EVM with USB Boot
support
defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot
support
doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI

 MAINTAINERS                                         |  2 ++
 configs/am57xx_hs_evm_defconfig                     |  1 +
 ...hs_evm_defconfig => am57xx_hs_evm_usb_defconfig} |  6 ++++++
 configs/dra7xx_hs_evm_defconfig                     |  8 +++++++-
 ...hs_evm_defconfig => dra7xx_hs_evm_usb_defconfig} | 13 ++++++++++++-
 doc/README.ti-secure                                |  8 ++++++--
 6 files changed, 34 insertions(+), 4 deletions(-)
 copy configs/{am57xx_hs_evm_defconfig => am57xx_hs_evm_usb_defconfig} (94%)
 copy configs/{dra7xx_hs_evm_defconfig => dra7xx_hs_evm_usb_defconfig} (87%)
Signature · 1 line
2.19.1
#1 lore raw

PATCH v4 1/5 defconfigs: dra7xx_hs_evm: Sync HS and non-HS defconfigs

Additions have been made to the non-HS defconfig without the same being made to the HS defconfig, sync them.

---
 configs/dra7xx_hs_evm_defconfig | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
configs/dra7xx_hs_evm_defconfig +7 -1
index 735be5506a..f9983f4805 100644
@@ -2,7 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_TI_SECURE_DEVICE=y
 CONFIG_TI_COMMON_CMD_OPTIONS=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
 CONFIG_OMAP54XX=y
 CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
 CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
@@ -37,13 +37,18 @@ CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
 CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm dra76-evm"
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_UNCOMPRESS_SZ=0x9000
+CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
+CONFIG_SPL_DM_DEVICE_REMOVE=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_DWC_AHCI=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
@@ -62,6 +67,7 @@ CONFIG_DM_MMC=y
 CONFIG_MMC_IO_VOLTAGE=y
 CONFIG_MMC_UHS_SUPPORT=y
 CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
Signature · 1 line
2.19.1
#2 lore raw

PATCH v4 1/5 defconfigs: dra7xx_hs_evm: Sync HS and non-HS defconfigs

Quoted 4 lines · Andrew F. Davis

Additions have been made to the non-HS defconfig without the same being made to the HS defconfig, sync them.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190210/d89af16d/attachment.sig>
#3 lore raw

PATCH v4 2/5 defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs

In reply to Andrew F. Davis

Additions have been made to the non-HS defconfig without the same being made to the HS defconfig, sync them.

---
 configs/am57xx_hs_evm_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/am57xx_hs_evm_defconfig +1 -0
index 6924b0bd06..7bdf8dc64d 100644
@@ -32,6 +32,7 @@ CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_PMIC is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
Signature · 1 line
2.19.1
#4 lore raw

PATCH v4 2/5 defconfigs: am57xx_hs_evm: Sync HS and non-HS defconfigs

Quoted 4 lines · Andrew F. Davis

Additions have been made to the non-HS defconfig without the same being made to the HS defconfig, sync them.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190210/a90e9cff/attachment.sig>
#5 lore raw

PATCH v4 3/5 defconfigs: Add config for DRA7xx High Security EVM with USB Boot support

In reply to Andrew F. Davis

Add a new defconfig file for the DRA7xx High Security EVM. This config is specific for the case of USB booting.

---
 MAINTAINERS                         |   1 +
 configs/dra7xx_hs_evm_usb_defconfig | 113 ++++++++++++++++++++++++++++
 2 files changed, 114 insertions(+)
 create mode 100644 configs/dra7xx_hs_evm_usb_defconfig
MAINTAINERS +1 -0
index 33f1127e50..cdf5a67321 100644
@@ -690,6 +690,7 @@ F:	configs/am335x_hs_evm_uart_defconfig
 F:	configs/am43xx_hs_evm_defconfig
 F:	configs/am57xx_hs_evm_defconfig
 F:	configs/dra7xx_hs_evm_defconfig
+F:	configs/dra7xx_hs_evm_usb_defconfig
 F:	configs/k2hk_hs_evm_defconfig
 F:	configs/k2e_hs_evm_defconfig
 F:	configs/k2g_hs_evm_defconfig
configs/dra7xx_hs_evm_usb_defconfig new file +113 -0

113 lines not on this page · raw message

Signature · 1 line
2.19.1
#6 lore raw

PATCH v4 3/5 defconfigs: Add config for DRA7xx High Security EVM with USB Boot support

Quoted 5 lines · Andrew F. Davis

Add a new defconfig file for the DRA7xx High Security EVM. This config is specific for the case of USB booting.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190210/b501883f/attachment.sig>
#7 lore raw

PATCH v4 4/5 defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support

In reply to Andrew F. Davis

Add a new defconfig file for the AM57xx High Security EVM. This config is specific for the case of USB/UART booting.

---
 MAINTAINERS                         |  1 +
 configs/am57xx_hs_evm_usb_defconfig | 98 +++++++++++++++++++++++++++++
 2 files changed, 99 insertions(+)
 create mode 100644 configs/am57xx_hs_evm_usb_defconfig
MAINTAINERS +1 -0
index cdf5a67321..6f026024a9 100644
@@ -689,6 +689,7 @@ F:	configs/am335x_hs_evm_defconfig
 F:	configs/am335x_hs_evm_uart_defconfig
 F:	configs/am43xx_hs_evm_defconfig
 F:	configs/am57xx_hs_evm_defconfig
+F:	configs/am57xx_hs_evm_usb_defconfig
 F:	configs/dra7xx_hs_evm_defconfig
 F:	configs/dra7xx_hs_evm_usb_defconfig
 F:	configs/k2hk_hs_evm_defconfig
configs/am57xx_hs_evm_usb_defconfig new file +98 -0

98 lines not on this page · raw message

Signature · 1 line
2.19.1
#8 lore raw

PATCH v4 4/5 defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support

Quoted 5 lines · Andrew F. Davis

Add a new defconfig file for the AM57xx High Security EVM. This config is specific for the case of USB/UART booting.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190210/09ab93d0/attachment.sig>
#9 lore raw

PATCH v4 5/5 doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI

In reply to Andrew F. Davis

Booting from UART and USB on HS devices is now supported for this platform. Update documentation for the same.

---
 doc/README.ti-secure | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
doc/README.ti-secure +6 -2
index 4b5380c0f3..76950253ac 100644
@@ -108,7 +108,8 @@ Booting of U-Boot SPL
 	Invoking the script for DRA7xx/AM57xx Secure Devices
 	====================================================
 
-	create-boot-image.sh <IMAGE_TYPE> <INPUT_FILE> <OUTPUT_FILE>
+	create-boot-image.sh \
+		<IMAGE_TYPE> <INPUT_FILE> <OUTPUT_FILE> <SPL_LOAD_ADDR>
 
 	<IMAGE_TYPE> is a value that specifies the type of the image to
 	generate OR the action the image generation tool will take. Valid
@@ -116,7 +117,6 @@ Booting of U-Boot SPL
 		X-LOADER - Generates an image for NOR or QSPI boot modes
 		MLO - Generates an image for SD/MMC/eMMC boot modes
 		ULO - Generates an image for USB/UART peripheral boot modes
-		Note: ULO is not yet used by the u-boot build process
 
 	<INPUT_FILE> is the full path and filename of the public world boot
 	loader binary file (for this platform, this is always u-boot-spl.bin).
@@ -130,9 +130,13 @@ Booting of U-Boot SPL
 		the device ROM bootloader requires for loading from
 		the FAT partition of an SD card (same as on
 		non-secure devices)
+	u-boot-spl_HS_ULO - boot image for USB/UART peripheral boot modes
 	u-boot-spl_HS_X-LOADER - boot image for all other flash memories
 		including QSPI and NOR flash
 
+	<SPL_LOAD_ADDR> is the address at which SOC ROM should load the
+	<INPUT_FILE>
+
 	Invoking the script for Keystone2 Secure Devices
 	=============================================
 
Signature · 1 line
2.19.1
#10 lore raw

PATCH v4 5/5 doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI

Quoted 5 lines · Andrew F. Davis

Booting from UART and USB on HS devices is now supported for this platform. Update documentation for the same.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190210/a0e96d55/attachment.sig>