Skip to contentSkip to conversation

package/xmlsec1: new package

PATCH Superseded Bastian Breit 2 participants 5 messages Feb 10, 2019 – Apr 13, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 package/xmlsec1: new package

This fixes spaces and tab formatting in the package folder. Therefore an enty in DEVELOPERS is created.
Change from md5 to sha256 for checksums.
Remove unneeded libxslt dependency.

---
 DEVELOPERS                         |  3 +++
 package/Config.in                  |  1 +
 package/libxmlsec1/Config.in       | 11 +++++++++++
 package/libxmlsec1/libxmlsec1.hash |  4 ++++
 package/libxmlsec1/libxmlsec1.mk   | 20 ++++++++++++++++++++
 5 files changed, 39 insertions(+)
 create mode 100644 package/libxmlsec1/Config.in
 create mode 100644 package/libxmlsec1/libxmlsec1.hash
 create mode 100644 package/libxmlsec1/libxmlsec1.mk
DEVELOPERS +3 -0
index f2e69cc041..2bcd561805 100644
@@ -250,6 +250,9 @@ F:	package/tcpdump/
 F:	package/ti-uim/
 F:	package/uhubctl/
 
+N: Bastian Breit <[email protected]>
+F: package/libxmlsec1/
+
 N:	Ben Boeckel <[email protected]>
 F:	package/taskd/
 
package/Config.in +1 -0
index 29862c478c..18acfd9db8 100644
@@ -1428,6 +1428,7 @@ menu "JSON/XML"
 	source "package/libxml2/Config.in"
 	source "package/libxmlpp/Config.in"
 	source "package/libxmlrpc/Config.in"
+	source "package/libxmlsec1/Config.in"
 	source "package/libxslt/Config.in"
 	source "package/libyaml/Config.in"
 	source "package/mxml/Config.in"
package/libxmlsec1/Config.in new file +11 -0
new file mode 100644
index 0000000000..ce3384e7b7
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_LIBXMLSEC1
+	bool "libxmlsec1"
+	select BR2_PACKAGE_LIBXML2
+	select BR2_PACKAGE_OPENSSL
+	help
+	  XMLSec library provides C based implementation for major XML
+	  Security standards:
+	  - XML Signature Syntax and Processing
+	  - XML Encryption Syntax and Processing
+
+	  https://www.aleksey.com/xmlsec/
package/libxmlsec1/libxmlsec1.hash new file +4 -0
new file mode 100644
index 0000000000..9ff3b35454
@@ -0,0 +1,4 @@
+# Locally calculated
+sha256 97d756bad8e92588e6997d2227797eaa900d05e34a426829b149f65d87118eb6  xmlsec1-1.2.27.tar.gz
+# Locally calculated
+sha256 526285395dd39627199ba20fd7f70a2608c8c8c70e4fea04aceddd71baa53d07  Copyright
package/libxmlsec1/libxmlsec1.mk new file +20 -0
new file mode 100644
index 0000000000..e6a0a375e9
@@ -0,0 +1,20 @@
+################################################################################
+#
+# libxmlsec1
+#
+################################################################################
+
+LIBXMLSEC1_VERSION = 1.2.27
+LIBXMLSEC1_SOURCE = xmlsec1-$(LIBXMLSEC1_VERSION).tar.gz
+LIBXMLSEC1_SITE = http://www.aleksey.com/xmlsec/download
+LIBXMLSEC1_LICENSE = MIT
+LIBXMLSEC1_LICENSE_FILES = Copyright
+
+LIBXMLSEC1_CONF_OPTS += --enable-crypto-dl=no
+LIBXMLSEC1_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr
+LIBXMLSEC1_CONF_OPTS += --with-libxslt=no
+LIBXMLSEC1_CONF_OPTS += --with-gnutls=no
+LIBXMLSEC1_CONF_OPTS += --with-gcrypt=no
+LIBXMLSEC1_DEPENDENCIES = libxml2 openssl
+
+$(eval $(autotools-package))
Signature · 1 line
2.17.1
#1 lore raw

PATCH v2 1/1 package/xmlsec1: new package

I would summit options with later commits for the dependencies like gnutls which is currently deactivated for this package. Should that be mentioned in the help text? It should be clear by reading the current dependencies. Does anyone prefer gnutls over openssl for non licencing reasons? I am not sure how to handle licence changing by selecting different dependencies (gnutls vs openssl)

Am So., 10. Feb. 2019 um 16:12 Uhr schrieb Bastian Breit <[email protected]>:

Quoted 98 lines

This fixes spaces and tab formatting in the package folder. Therefore an enty in DEVELOPERS is created.
Change from md5 to sha256 for checksums.
Remove unneeded libxslt dependency.

---
 DEVELOPERS                         |  3 +++
 package/Config.in                  |  1 +
 package/libxmlsec1/Config.in       | 11 +++++++++++
 package/libxmlsec1/libxmlsec1.hash |  4 ++++
 package/libxmlsec1/libxmlsec1.mk   | 20 ++++++++++++++++++++
 5 files changed, 39 insertions(+)
 create mode 100644 package/libxmlsec1/Config.in
 create mode 100644 package/libxmlsec1/libxmlsec1.hash
 create mode 100644 package/libxmlsec1/libxmlsec1.mk
DEVELOPERS +3 -0
index f2e69cc041..2bcd561805 100644
@@ -250,6 +250,9 @@ F:  package/tcpdump/
 F:     package/ti-uim/
 F:     package/uhubctl/
 
+N: Bastian Breit <[email protected]>
+F: package/libxmlsec1/
+
 N:     Ben Boeckel <[email protected]>
 F:     package/taskd/
 
package/Config.in +1 -0
index 29862c478c..18acfd9db8 100644
@@ -1428,6 +1428,7 @@ menu "JSON/XML"
        source "package/libxml2/Config.in"
        source "package/libxmlpp/Config.in"
        source "package/libxmlrpc/Config.in"
+       source "package/libxmlsec1/Config.in"
        source "package/libxslt/Config.in"
        source "package/libyaml/Config.in"
        source "package/mxml/Config.in"
package/libxmlsec1/Config.in new file +11 -0
new file mode 100644
index 0000000000..ce3384e7b7
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_LIBXMLSEC1
+       bool "libxmlsec1"
+       select BR2_PACKAGE_LIBXML2
+       select BR2_PACKAGE_OPENSSL
+       help
+         XMLSec library provides C based implementation for major XML
+         Security standards:
+         - XML Signature Syntax and Processing
+         - XML Encryption Syntax and Processing
+
+         https://www.aleksey.com/xmlsec/
package/libxmlsec1/libxmlsec1.hash new file +4 -0
new file mode 100644
index 0000000000..9ff3b35454
@@ -0,0 +1,4 @@
+# Locally calculated
+sha256 97d756bad8e92588e6997d2227797eaa900d05e34a426829b149f65d87118eb6  xmlsec1-1.2.27.tar.gz
+# Locally calculated
+sha256 526285395dd39627199ba20fd7f70a2608c8c8c70e4fea04aceddd71baa53d07  Copyright
package/libxmlsec1/libxmlsec1.mk new file +20 -1
new file mode 100644
index 0000000000..e6a0a375e9
@@ -0,0 +1,20 @@
+################################################################################
+#
+# libxmlsec1
+#
+################################################################################
+
+LIBXMLSEC1_VERSION = 1.2.27
+LIBXMLSEC1_SOURCE = xmlsec1-$(LIBXMLSEC1_VERSION).tar.gz
+LIBXMLSEC1_SITE = http://www.aleksey.com/xmlsec/download
+LIBXMLSEC1_LICENSE = MIT
+LIBXMLSEC1_LICENSE_FILES = Copyright
+
+LIBXMLSEC1_CONF_OPTS += --enable-crypto-dl=no
+LIBXMLSEC1_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr
+LIBXMLSEC1_CONF_OPTS += --with-libxslt=no
+LIBXMLSEC1_CONF_OPTS += --with-gnutls=no
+LIBXMLSEC1_CONF_OPTS += --with-gcrypt=no
+LIBXMLSEC1_DEPENDENCIES = libxml2 openssl
+
+$(eval $(autotools-package))
--

2.17.1

#2 lore raw

PATCH v2 1/1 package/xmlsec1: new package

Hello Bastian,

Quoted 4 lines · On Tue, 12 Feb 2019 17:13:08 +0100 Bastian Breit…

I would summit options with later commits for the dependencies like gnutls which is currently deactivated for this package. Should that be mentioned in the help text? It should be clear by reading the current dependencies.

We don't typically document all possible dependencies of packages in the help text, it would be annoying to maintain. Handling them in the .mk file is enough.

Quoted 3 lines

Does anyone prefer gnutls over openssl for non licencing reasons? I am not sure how to handle licence changing by selecting different dependencies (gnutls vs openssl)

Why would the license change ? The license of libxmlsec1 itself remains MIT.

I guess that openssl/gnutls/libgcrypt is actually a choice, i.e one would use one of the three, correct ?

If so, then you can do:

	select BR2_PACKAGE_OPENSSL if !BR2_PACKAGE_GNUTLS && !BR2_PACKAGE_LIBGCRYPT

in the Config.in file, and:

ifeq ($(BR2_PACKAGE_OPENSSL),y) LIBXMLSEC1_DEPENDENCIES += openssl LIBXMLSEC1_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr else ifeq ($(BR2_PACKAGE_GNUTLS),y)
...
else ifeq ($(BR2_PACKAGE_LIBGCRYPT),y)
...
endif

You could also do the same to support libxslt as an optional dependency. All of this can be done as part of the initial libxmlsec1 submission, or as follow-up patches.

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
#3 lore raw

PATCH v2 1/1 package/xmlsec1: new package

In reply to Bastian Breit

Hi Thomas,

it would be nice if you could review the patch.
I have some more patches which I wanted to contribute (e.g. chrome, libwebsocket, netcat6, etc), which I will do, if I know everything is okay with the libxmlsec.

sincerely

Bastian

Am So., 10. Feb. 2019 um 16:12 Uhr schrieb Bastian Breit <[email protected]>:

Quoted 98 lines

This fixes spaces and tab formatting in the package folder. Therefore an enty in DEVELOPERS is created.
Change from md5 to sha256 for checksums.
Remove unneeded libxslt dependency.

---
 DEVELOPERS                         |  3 +++
 package/Config.in                  |  1 +
 package/libxmlsec1/Config.in       | 11 +++++++++++
 package/libxmlsec1/libxmlsec1.hash |  4 ++++
 package/libxmlsec1/libxmlsec1.mk   | 20 ++++++++++++++++++++
 5 files changed, 39 insertions(+)
 create mode 100644 package/libxmlsec1/Config.in
 create mode 100644 package/libxmlsec1/libxmlsec1.hash
 create mode 100644 package/libxmlsec1/libxmlsec1.mk
DEVELOPERS +3 -0
index f2e69cc041..2bcd561805 100644
@@ -250,6 +250,9 @@ F:  package/tcpdump/
 F:     package/ti-uim/
 F:     package/uhubctl/
 
+N: Bastian Breit <[email protected]>
+F: package/libxmlsec1/
+
 N:     Ben Boeckel <[email protected]>
 F:     package/taskd/
 
package/Config.in +1 -0
index 29862c478c..18acfd9db8 100644
@@ -1428,6 +1428,7 @@ menu "JSON/XML"
        source "package/libxml2/Config.in"
        source "package/libxmlpp/Config.in"
        source "package/libxmlrpc/Config.in"
+       source "package/libxmlsec1/Config.in"
        source "package/libxslt/Config.in"
        source "package/libyaml/Config.in"
        source "package/mxml/Config.in"
package/libxmlsec1/Config.in new file +11 -0
new file mode 100644
index 0000000000..ce3384e7b7
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_LIBXMLSEC1
+       bool "libxmlsec1"
+       select BR2_PACKAGE_LIBXML2
+       select BR2_PACKAGE_OPENSSL
+       help
+         XMLSec library provides C based implementation for major XML
+         Security standards:
+         - XML Signature Syntax and Processing
+         - XML Encryption Syntax and Processing
+
+         https://www.aleksey.com/xmlsec/
package/libxmlsec1/libxmlsec1.hash new file +4 -0
new file mode 100644
index 0000000000..9ff3b35454
@@ -0,0 +1,4 @@
+# Locally calculated
+sha256 97d756bad8e92588e6997d2227797eaa900d05e34a426829b149f65d87118eb6  xmlsec1-1.2.27.tar.gz
+# Locally calculated
+sha256 526285395dd39627199ba20fd7f70a2608c8c8c70e4fea04aceddd71baa53d07  Copyright
package/libxmlsec1/libxmlsec1.mk new file +20 -1
new file mode 100644
index 0000000000..e6a0a375e9
@@ -0,0 +1,20 @@
+################################################################################
+#
+# libxmlsec1
+#
+################################################################################
+
+LIBXMLSEC1_VERSION = 1.2.27
+LIBXMLSEC1_SOURCE = xmlsec1-$(LIBXMLSEC1_VERSION).tar.gz
+LIBXMLSEC1_SITE = http://www.aleksey.com/xmlsec/download
+LIBXMLSEC1_LICENSE = MIT
+LIBXMLSEC1_LICENSE_FILES = Copyright
+
+LIBXMLSEC1_CONF_OPTS += --enable-crypto-dl=no
+LIBXMLSEC1_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr
+LIBXMLSEC1_CONF_OPTS += --with-libxslt=no
+LIBXMLSEC1_CONF_OPTS += --with-gnutls=no
+LIBXMLSEC1_CONF_OPTS += --with-gcrypt=no
+LIBXMLSEC1_DEPENDENCIES = libxml2 openssl
+
+$(eval $(autotools-package))
--

2.17.1

#4 lore raw

PATCH v2 1/1 package/xmlsec1: new package

In reply to Bastian Breit

Hello Bastian,

Sorry for the very slow feedback. I wanted to apply this patch (after some rework), but some fundamental thing is missing, which requires another iteration: the commit log lacks your Signed-off-by line. So I'll do a full review below.

First, the commit title should match the package name:

package/libxmlsec1: new package

Quoted 4 lines · On Sun, 10 Feb 2019 16:12:07 +0100 Bastian Breit…

This fixes spaces and tab formatting in the package folder. Therefore an enty in DEVELOPERS is created.
Change from md5 to sha256 for checksums.
Remove unneeded libxslt dependency.

The changelog should be after the "---" sign below, so that it doesn't end up in the commit log when the patch is applied.

And more critically, we need your Signed-off-by at the end of the commit log.

Quoted 16 lines
---
 DEVELOPERS                         |  3 +++
 package/Config.in                  |  1 +
 package/libxmlsec1/Config.in       | 11 +++++++++++
 package/libxmlsec1/libxmlsec1.hash |  4 ++++
 package/libxmlsec1/libxmlsec1.mk   | 20 ++++++++++++++++++++
 5 files changed, 39 insertions(+)
 create mode 100644 package/libxmlsec1/Config.in
 create mode 100644 package/libxmlsec1/libxmlsec1.hash
 create mode 100644 package/libxmlsec1/libxmlsec1.mk
DEVELOPERS +0 -0
index f2e69cc041..2bcd561805 100644

DEVELOPERS F: package/tcpdump/ · line 254

Quoted 5 lines
DEVELOPERS +2 -0
@@ -250,6 +250,9 @@ F:	package/tcpdump/
 F:	package/ti-uim/
 F:	package/uhubctl/
 
+N: Bastian Breit <[email protected]>
+F: package/libxmlsec1/

Please fix the indentation here to comply with the rest of the file.

Quoted 23 lines
package/libxmlsec1/libxmlsec1.hash new file +4 -0
new file mode 100644
index 0000000000..9ff3b35454
@@ -0,0 +1,4 @@
+# Locally calculated
+sha256 97d756bad8e92588e6997d2227797eaa900d05e34a426829b149f65d87118eb6  xmlsec1-1.2.27.tar.gz
+# Locally calculated
+sha256 526285395dd39627199ba20fd7f70a2608c8c8c70e4fea04aceddd71baa53d07  Copyright
package/libxmlsec1/libxmlsec1.mk new file +7 -0
new file mode 100644
index 0000000000..e6a0a375e9
@@ -0,0 +1,20 @@
+################################################################################
+#
+# libxmlsec1
+#
+################################################################################
+
+LIBXMLSEC1_VERSION = 1.2.27

package/libxmlsec1/libxmlsec1.mk line 17

Quoted 10 lines
package/libxmlsec1/libxmlsec1.mk new file +10 -0
+LIBXMLSEC1_SOURCE = xmlsec1-$(LIBXMLSEC1_VERSION).tar.gz
+LIBXMLSEC1_SITE = http://www.aleksey.com/xmlsec/download
+LIBXMLSEC1_LICENSE = MIT
+LIBXMLSEC1_LICENSE_FILES = Copyright
+
+LIBXMLSEC1_CONF_OPTS += --enable-crypto-dl=no
+LIBXMLSEC1_CONF_OPTS += --with-openssl=$(STAGING_DIR)/usr
+LIBXMLSEC1_CONF_OPTS += --with-libxslt=no
+LIBXMLSEC1_CONF_OPTS += --with-gnutls=no
+LIBXMLSEC1_CONF_OPTS += --with-gcrypt=no

One assignment is enough, and use --enable/--disable and --with/--without. I.e:

LIBXMLSEC1_CONF_OPTS = \
	--disable-crypto-dl=no \
	--with-openssl=$(STAGING_DIR)/usr \
	--without-libxslt \
	--without-gnutls \
	--without-gcrypt

Thanks!

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com