Skip to contentSkip to conversation

dt-binding: iio: remove rst node from NPCM ADC document

PATCH In review Tomer Maimon 2 participants 2 messages Feb 10, 2019 – Feb 11, 2019

Subsystems (3)
Device tree bindings IIO Arm/nuvoton npcm architecture
lore
Share & tools
lore

Tomer Maimon

author maintainer
#0 lore raw

PATCH 1/1 dt-binding: iio: remove rst node from NPCM ADC document

Remove NPCM7xx rst node for preparing the NPCM ADC document to describe ADC reset binding.

Signed-off-by Tomer Maimon <[email protected]>
---
 .../devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt          | 11 -----------
 1 file changed, 11 deletions(-)
Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt +0 -11
index 1b8132cd9060..eb939fe77836 100644
@@ -14,11 +14,6 @@ Optional properties:
 			   vref-supply is not added the ADC will use internal voltage
 			   reference.
 
-Required Node in the NPCM7xx BMC:
-An additional register is present in the NPCM7xx SOC which is
-assumed to be in the same device tree, with and marked as
-compatible with "nuvoton,npcm750-rst".
-
 Example:
 
 adc: adc@f000c000 {

@@ -27,9 +22,3 @@ adc: adc@f000c000 {
 	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&clk NPCM7XX_CLK_ADC>;
 };
-
-rst: rst@f0801000 {
-	compatible = "nuvoton,npcm750-rst", "syscon",
-	"simple-mfd";
-	reg = <0xf0801000 0x6C>;
-};
Signature · 1 line
2.14.1
maintainer
#1 lore raw
Quoted 4 lines · On Sun, 10 Feb 2019 22:47:49 +0200 Tomer Maimon <[email protected]> wrote:

Remove NPCM7xx rst node for preparing the NPCM ADC document to describe ADC reset binding.

Signed-off-by Tomer Maimon <[email protected]>

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it. Hopefully just in time for this cycle as I'll do a final pull request in a day or two.

Thanks,

Jonathan

Quoted 30 lines
---
 .../devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt          | 11 -----------
 1 file changed, 11 deletions(-)
Documentation/devicetree/bindings/iio/adc/nuvoton,npcm-adc.txt +0 -11
index 1b8132cd9060..eb939fe77836 100644
@@ -14,11 +14,6 @@ Optional properties:
 			   vref-supply is not added the ADC will use internal voltage
 			   reference.
 
-Required Node in the NPCM7xx BMC:
-An additional register is present in the NPCM7xx SOC which is
-assumed to be in the same device tree, with and marked as
-compatible with "nuvoton,npcm750-rst".
-
 Example:
 
 adc: adc@f000c000 {

@@ -27,9 +22,3 @@ adc: adc@f000c000 {
 	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&clk NPCM7XX_CLK_ADC>;
 };
-
-rst: rst@f0801000 {
-	compatible = "nuvoton,npcm750-rst", "syscon",
-	"simple-mfd";
-	reg = <0xf0801000 0x6C>;
-};