ARM: dts: omap3-gta04: declare backlight in lcd node
PATCH 1/1 ARM: dts: omap3-gta04: declare backlight in lcd node
The lcd display of the gta04 has a backlight but the backlight was not referenced in the lcd node, so screen blanking did not turn off the backlight. Fix that.
---
the backlight property for the driver was accepted here:
https://lore.kernel.org/lkml/[email protected]/
arch/arm/boot/dts/omap3-gta04.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm/boot/dts/omap3-gta04.dtsi +2 -1
@@ -142,6 +142,7 @@ spi-cpol; spi-cpha; + backlight= <&backlight>; label = "lcd"; port { lcd_in: endpoint {
@@ -151,7 +152,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm11 0 12000000 0>; pwm-names = "backlight";
Signature · 1 line
2.11.0
Quoted 8 lines
Am 11.02.2019 um 17:20 schrieb Andreas Kemnade <[email protected]>:
The lcd display of the gta04 has a backlight but the backlight was not referenced in the lcd node, so screen blanking did not turn off the backlight. Fix that.
Signed-off-by Andreas Kemnade <[email protected]>
Works fine.
Quoted 36 lines
---
the backlight property for the driver was accepted here:
https://lore.kernel.org/lkml/[email protected]/
arch/arm/boot/dts/omap3-gta04.dtsi| 3 ++-1 file changed, 2 insertions(+), 1 deletion(-)arch/arm/boot/dts/omap3-gta04.dtsi +2
-1@@ -142,6 +142,7 @@ spi-cpol; spi-cpha; + backlight= <&backlight>; label = "lcd"; port { lcd_in: endpoint {@@ -151,7 +152,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm11 0 12000000 0>; pwm-names = "backlight";Signature · 7 lines
2.11.0 _______________________________________________ http://projects.goldelico.com/p/gta04-kernel/ Letux-kernel mailing list [email protected] http://lists.goldelico.com/mailman/listinfo.cgi/letux-kernel
Tony Lindgren
AppliedQuoted 7 lines · H. Nikolaus Schaller
Quoted 7 lines
Am 11.02.2019 um 17:20 schrieb Andreas Kemnade <[email protected]>:
The lcd display of the gta04 has a backlight but the backlight was not referenced in the lcd node, so screen blanking did not turn off the backlight. Fix that.
Quoted 5 lines
Quoted 1 line
Signed-off-by Andreas Kemnade <[email protected]>Works fine.
Tested-by H. Nikolaus Schaller <[email protected]>
Thanks applied into omap-for-v5.1/dt.
Tony