Skip to contentSkip to conversation

Documentation: dt: Add binding info for jz4740-musb driver

PATCH New Bin Liu 1 participant 1 message Feb 11, 2019

Subsystems (2)
lore
Share & tools
lore

Bin Liu

author
#0 lore raw

PATCH 2/5 Documentation: dt: Add binding info for jz4740-musb driver

From: Paul Cercueil <[email protected]>

This commit adds documentation for the device-tree bindings of the jz4740-musb driver, which provides support for the USB gadget mode of the JZ4740 and similar SoCs from Ingenic.

---
 .../bindings/usb/ingenic,jz4740-musb.txt      | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt
Documentation/devicetree/bindings/usb/ingenic,jz4740-musb.txt new file +24 -0
new file mode 100644
index 000000000000..620355cee63f
@@ -0,0 +1,24 @@
+Ingenic JZ4740 MUSB driver
+
+Required properties:
+
+- compatible: Must be "ingenic,jz4740-musb"
+- reg: Address range of the UDC register set
+- interrupts: IRQ number related to the UDC hardware
+- interrupt-names: must be "mc"
+- clocks: phandle to the "udc" clock
+- clock-names: must be "udc"
+
+Example:
+
+udc: usb@13040000 {
+	compatible = "ingenic,jz4740-musb";
+	reg = <0x13040000 0x10000>;
+
+	interrupt-parent = <&intc>;
+	interrupts = <24>;
+	interrupt-names = "mc";
+
+	clocks = <&cgu JZ4740_CLK_UDC>;
+	clock-names = "udc";
+};