mmc: Introduce support for WP GPIO in the core SDHCI
Subsystems (4)
v3 cover mmc: Introduce support for WP GPIO in the core SDHCI
Hello,
While doing the bring up of a Zynq 7000 platform where the WP signal of a SD slot is connected to a regular GPIO rather than through the SDHCI WP pin, I realized that the GPIO described by wp-gpios was properly requested, but it was in fact not used at all.
Indeed, the SDHCI core implements sdhci_check_ro() by:
- Calling a controller-specific ->get_ro() callback if it exists. A few controller-specific drivers implement this, but not sdhci-of-arasan, which is used on Zynq 7000.
- Using the SDHCI_PRESENT_STATE register, which reports the state of the SDHCI interface WP pin, and obvisouly not the state of a separate WP GPIO.
This patch series therefore changes sdhci_check_ro() to behave like sdhci_get_cd(): use a GPIO first if available, and if not, fallback to using the SDHCI_PRESENT_STATE register. Indeed, if there's a wp-gpios described in the DT, it quite certainly indicates that the SDHCI WP signal is not used, and the WP GPIO should be used instead.
As part of this series, two SDHCI drivers are modified to no longer implement their custom ->get_ro() hook, since the core SDHCI now does the right thing with the WP GPIO.
Changes since v2:
- Don't change the argument passed to sdhci_check_ro(), as requested by Adrian Hunter.
- Collect Acked-by from Adrian Hunter on PATCH 2 and PATCH 3.
Changes since v1:
- Call the ->get_ro() callback before using the WP GPIO in the core, as suggested by Adrian Hunter.
- Fix typoes in commit logs.
- Collect Reviewed-by/Tested-by/Acked-by tags.
Best regards,
Thomas
Thomas Petazzoni (3):
mmc: sdhci: use WP GPIO in sdhci_check_ro()
mmc: sdhci-omap: drop ->get_ro() implementation
mmc: sdhci-tegra: drop ->get_ro() implementation
drivers/mmc/host/sdhci-omap.c | 1 - drivers/mmc/host/sdhci-tegra.c | 9 --------- drivers/mmc/host/sdhci.c | 2 ++ 3 files changed, 2 insertions(+), 10 deletions(-)
Signature · 1 line
2.20.1
PATCH v3 1/3 mmc: sdhci: use WP GPIO in sdhci_check_ro()
Even though SDHCI controllers may have a dedicated WP pin that can be queried using the SDHCI_PRESENT_STATE register, some platforms may chose to use a separate regular GPIO to route the WP signal. Such a GPIO is typically represented using the wp-gpios property in the Device Tree.
Unfortunately, the current sdhci_check_ro() function does not make use of such GPIO when available: it either uses a host controller specific ->get_ro() operation, or uses the SDHCI_PRESENT_STATE. Several host controller specific ->get_ro() functions are implemented just to check a WP GPIO state.
Instead of pushing this to more controller-specific implementations, let's handle this in the core SDHCI code, just like it is already done for the CD GPIO in sdhci_get_cd().
The below patch simply changes sdhci_check_ro() to use the value of the WP GPIO if available.
---
Changes since v2:
- As suggested by Adrian Hunter, keep the argument of sdhci_check_ro() as it is: a "struct sdhci_host*"
Changes since v1:
- As suggested by Adrian Hunter, call the ->get_ro() if it exists before falling back to using mmc_gpio_get_ro(). Indeed, if the controller-specific code has implemented a ->get_ro() callback, it should take precedence over what the SDHCI core does.
Due to this change, I have not added Thierry Redding Reviewed-by.
- Fix typo in the commit log noticed by Thierry Redding.
--- drivers/mmc/host/sdhci.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/mmc/host/sdhci.c +2 -0
@@ -2033,6 +2033,8 @@ static int sdhci_check_ro(struct sdhci_host *host) is_readonly =0 ; else if (host->ops->get_ro) is_readonly = host->ops->get_ro (host); + else if (mmc_can_gpio_ro(host->mmc)) + is_readonly =mmc_gpio_get_ro (host->mmc); else is_readonly = !(sdhci_readl (host,SDHCI_PRESENT_STATE ) &SDHCI_WRITE_PROTECT );
Signature · 1 line
2.20.1
Re: [PATCH v3 1/3] mmc: sdhci: use WP GPIO in sdhci_check_ro()
Quoted 12 lines · Thomas Petazzoni
Even though SDHCI controllers may have a dedicated WP pin that can be queried using the
SDHCI_PRESENT_STATEregister, some platforms may chose to use a separate regular GPIO to route the WP signal. Such a GPIO is typically represented using the wp-gpios property in the Device Tree.Unfortunately, the current
sdhci_check_ro()function does not make use of such GPIO when available: it either uses a host controller specific ->get_ro() operation, or uses theSDHCI_PRESENT_STATE. Several host controller specific ->get_ro() functions are implemented just to check a WP GPIO state.
Quoted 8 lines
Instead of pushing this to more controller-specific implementations, let's handle this in the core SDHCI code, just like it is already done for the CD GPIO in
sdhci_get_cd().The below patch simply changes
sdhci_check_ro()to use the value of the WP GPIO if available.Signed-off-by Thomas Petazzoni <[email protected]>
Quoted 34 lines
---
Changes since v2:- As suggested by Adrian Hunter, keep the argument of
sdhci_check_ro()as it is: a "struct sdhci_host*"Changes since v1:
- As suggested by Adrian Hunter, call the ->get_ro() if it exists before falling back to using
mmc_gpio_get_ro(). Indeed, if the controller-specific code has implemented a ->get_ro() callback, it should take precedence over what the SDHCI core does.Due to this change, I have not added Thierry Redding Reviewed-by.
- Fix typo in the commit log noticed by Thierry Redding.
--- drivers/mmc/host/sdhci.c | 2 ++ 1 file changed, 2 insertions(+)drivers/mmc/host/sdhci.c +2
-0@@ -2033,6 +2033,8 @@ static int sdhci_check_ro(struct sdhci_host *host) is_readonly =0 ; else if (host->ops->get_ro) is_readonly = host->ops->get_ro (host); + else if (mmc_can_gpio_ro(host->mmc)) + is_readonly =mmc_gpio_get_ro (host->mmc); else is_readonly = !(sdhci_readl (host,SDHCI_PRESENT_STATE ) &SDHCI_WRITE_PROTECT );
PATCH v3 2/3 mmc: sdhci-omap: drop ->get_ro() implementation
In reply to Thomas PetazzoniThe SDHCI core is now properly checking for the state of a WP GPIO, so there is no longer any need for the sdhci-omap code to implement ->get_ro() using mmc_gpio_get_ro().
---
Changes since v2:
- Added Acked-by from Adrian Hunter
Changes since v1:
- Added Reviewed-by from Thierry Reding
- Fix typo in commit log s/know/now/ noticed by Thierry Reding
Note: this patch has only been compiled tested, as I don't have the hardware to test it.
--- drivers/mmc/host/sdhci-omap.c | 1 - 1 file changed, 1 deletion(-)
drivers/mmc/host/sdhci-omap.c +0 -1
@@ -987,7 +987,6 @@ static int sdhci_omap_probe(struct platform_device *pdev) goto err_put_sync; } - host->mmc_host_ops.get_ro = mmc_gpio_get_ro; host->mmc_host_ops.start_signal_voltage_switch = sdhci_omap_start_signal_voltage_switch; host->mmc_host_ops.set_ios = sdhci_omap_set_ios;
Signature · 1 line
2.20.1
PATCH v3 3/3 mmc: sdhci-tegra: drop ->get_ro() implementation
In reply to Thomas PetazzoniThe SDHCI core is know properly checking for the state of a WP GPIO, so there is no longer any need for the sdhci-tegra code to implement ->get_ro() using mmc_gpio_get_ro().
---
Changes since v2:
- Added Acked-by from Adrian Hunter
Changes since v1:
- Added Tested-by/Acked-by from Thierry Reding
Note: this patch has only been compiled tested, as I don't have the hardware to test it.
--- drivers/mmc/host/sdhci-tegra.c | 9 --------- 1 file changed, 9 deletions(-)
drivers/mmc/host/sdhci-tegra.c +0 -9
@@ -237,11 +237,6 @@ static void tegra210_sdhci_writew(struct sdhci_host *host, u16 val, int reg) } } -static unsigned int tegra_sdhci_get_ro (struct sdhci_host *host) -{ -return mmc_gpio_get_ro (host->mmc); -} -static bool tegra_sdhci_is_pad_and_regulator_valid (struct sdhci_host *host) {struct sdhci_pltfm_host *pltfm_host =sdhci_priv (host);
@@ -837,7 +832,6 @@ static void tegra_sdhci_voltage_switch(struct sdhci_host *host) }static const struct sdhci_ops tegra_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, .set_clock = tegra_sdhci_set_clock,
@@ -893,7 +887,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra30 = { };static const struct sdhci_ops tegra114_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_w = tegra_sdhci_writew, .write_l = tegra_sdhci_writel,
@@ -947,7 +940,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra124 = { };static const struct sdhci_ops tegra210_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_w = tegra210_sdhci_writew, .write_l = tegra_sdhci_writel,
@@ -980,7 +972,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra210 = { };static const struct sdhci_ops tegra186_sdhci_ops = { - .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, .set_clock = tegra_sdhci_set_clock,
Signature · 1 line
2.20.1