fstests: incore unlinked list
cover fstests: incore unlinked list
Hi all,
This series adds regression tests for the new XFS incore unlinked backref cache feature.
The first patch teaches the XFS debug knob code to _notrun a test if the kernel supports debug knob discovery (via sysfs) but doesn't advertise the particular knob.
The second patch adds four new regression tests. The two generic/ tests exercise the creation and removal of O_TMPFILE files (or files which have been created, opened, unlinked, and then closed), which ensures that the filesystem can demonstrate that behavior without problems. The two xfs/ tests examine the same behavior, but they deliberately skip the backref cache lookups to ensure that the old code still works.
If you're going to start using this mess, you probably ought to just pull from my git trees, which are linked below.
This is an extraordinary way to destroy everything. Enjoy! Comments and questions are, as always, welcome.
--D
kernel git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfs-linux.git/log/?h=incore-unlinked-list
xfsprogs git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfsprogs-dev.git/log/?h=incore-unlinked-list
fstests git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfstests-dev.git/log/?h=incore-unlinked-list
PATCH 1/2 inject: skip tests when knob dir exists but knob doesn't
From: Darrick J. Wong <[email protected]>
If the XFS error injection knob directory exists but the knob itself doesn't, then we know that this kernel doesn't support the knob and can skip the test.
--- common/inject | 7 +++++++ 1 file changed, 7 insertions(+)
common/inject +7 -0
@@ -62,6 +62,13 @@ _require_xfs_io_error_injection() knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" test -w "${knob}" && return + # If the directory containing the sysfs error injection knob exists + # but the knob itself isn't usable, this kernel doesn't know about + # the knob. Skip the test. + if [ -d "$(dirname "${knob}")" ]; then + _notrun "XFS error injection $type unknown on this kernel." + fi + # NOTE: We can't actually test error injection here because xfs # hasn't always range checked the argument to xfs_errortag_add. # We also don't want to trip an error before we're ready to deal
Re: [PATCH 1/2] inject: skip tests when knob dir exists but knob doesn't
Quoted 8 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
If the XFS error injection knob directory exists but the knob itself doesn't, then we know that this kernel doesn't support the knob and can skip the test.
Signed-off-by Darrick J. Wong <[email protected]>---
Quoted 23 lines
common/inject | 7 +++++++ 1 file changed, 7 insertions(+)common/inject +7
-0@@ -62,6 +62,13 @@ _require_xfs_io_error_injection() knob="$(_find_xfs_mountdev_errortag_knob "${TEST_DEV}" "${type}")" test -w "${knob}" && return + # If the directory containing the sysfs error injection knob exists + # but the knob itself isn't usable, this kernel doesn't know about + # the knob. Skip the test. + if [ -d "$(dirname "${knob}")" ]; then + _notrun "XFS error injection $type unknown on this kernel." + fi + # NOTE: We can't actually test error injection here because xfs # hasn't always range checked the argument to xfs_errortag_add. # We also don't want to trip an error before we're ready to deal
PATCH 2/2 generic: check the behavior of programs opening a lot of O_TMPFILE files
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.out
src/Makefile +1 -1
@@ -27,7 +27,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ renameat2 t_getcwd e4compact test-nextquota punch-alternating \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ - attr_replace_test swapon mkswap + attr_replace_test swapon mkswap tmpfile SUBDIRS = log-writes perf
src/tmpfile.c new file +127 -0
127 lines not on this page · raw message
tests/generic/710 new file +65 -0
65 lines not on this page · raw message
tests/generic/710.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 710 +silence is golden
tests/generic/711 new file +73 -0
73 lines not on this page · raw message
tests/generic/711.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 711 +silence is golden
tests/generic/group +2 -0
@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlink
tests/xfs/736 new file +71 -0
71 lines not on this page · raw message
tests/xfs/736.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 736 +silence is golden
tests/xfs/737 new file +79 -0
79 lines not on this page · raw message
tests/xfs/737.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 737 +silence is golden
tests/xfs/group +2 -0
@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
src/tmpfile.c
Quoted 48 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.outsrc/Makefile +1
-1@@ -27,7 +27,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ renameat2 t_getcwd e4compact test-nextquota punch-alternating \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ - attr_replace_test swapon mkswap + attr_replace_test swapon mkswap tmpfile SUBDIRS = log-writes perfsrc/tmpfile.c +0
-0
Let's go crazy and call it t_open_tmpfiles ?
Missing .gitignore patch.
...
src/tmpfile.c line 101
Quoted 9 lines
src/tmpfile.c +9
-0+/* Put an opened file on the unlinked list and leak the fd. */ +void leak_tmpfile (void ) +{ +int fd =-1 ; +int ret; + +/* Try to create an O_TMPFILE and leak the fd. */ +#ifdef O_TMPFILE + fd =open ("." ,O_TMPFILE |O_RDWR ,0644 );
Pass in path as argv[1], so you won't need to cd $SCRATCH_MNT all the time. Or does it have a purpose?
Thanks,
Amir.
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
Quoted 46 lines · Amir Goldstein
Quoted 45 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.outsrc/Makefile +1
-1@@ -27,7 +27,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ renameat2 t_getcwd e4compact test-nextquota punch-alternating \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ - attr_replace_test swapon mkswap + attr_replace_test swapon mkswap tmpfile
Quoted 6 lines
src/tmpfile.c
Quoted 3 lines
src/Makefile +0
-0SUBDIRS = log-writes perfsrc/tmpfile.c +0
-0Let's go crazy and call it
t_open_tmpfiles?
Missing .gitignore patch.
Will fix.
Quoted 13 lines
...
src/tmpfile.c line 101
Quoted 9 lines
src/tmpfile.c +9
-0+/* Put an opened file on the unlinked list and leak the fd. */ +void leak_tmpfile (void ) +{ +int fd =-1 ; +int ret; + +/* Try to create an O_TMPFILE and leak the fd. */ +#ifdef O_TMPFILE + fd =open ("." ,O_TMPFILE |O_RDWR ,0644 );Pass in path as argv[1], so you won't need to cd $SCRATCH_MNT all the time. Or does it have a purpose?
Nope, just sillyness on my part. Thanks for the suggestion.
--D
Quoted 2 lines
Thanks,
Amir.
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
In reply to Darrick J. WongQuoted 150 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.outsrc/Makefile +1
-1@@ -27,7 +27,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ renameat2 t_getcwd e4compact test-nextquota punch-alternating \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ - attr_replace_test swapon mkswap + attr_replace_test swapon mkswap tmpfile SUBDIRS = log-writes perfsrc/tmpfile.c new file +98
-0@@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Oracle. All Rights Reserved. +* Author: Darrick J. Wong <[email protected]> +* +* Test program to open unlinked files and leak them. +*/ +#ifndef _GNU_SOURCE +# define _GNU_SOURCE +#endif +#include <time.h> +#include <unistd.h> +#include <stdlib.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> + +static int min_fd =-1 ; +static int max_fd =-1 ; +static unsigned int nr_opened =0 ; +static float start_time; + +void clock_time (float *time) +{ +static clockid_t clkid =CLOCK_MONOTONIC ; +struct timespec ts; +int ret; + +retry: + ret =clock_gettime (clkid, &ts); +if (ret) { +if (clkid ==CLOCK_MONOTONIC ) { + clkid =CLOCK_REALTIME ; + goto retry; + } +perror ("clock_gettime" ); +exit (2 ); + } + *time = ts.tv_sec + ((float )ts.tv_nsec /1000000000 ); +} + +/* +* Exit the program due to an error. +* +* If we've exhausted all the file descriptors, make sure we close all the +* open fds in the order we received them in order to exploit a quirk of ext4 +* and xfs where the oldest unlinked inodes are at the /end/ of the unlinked +* lists, which will make removing the unlinked files maximally painful. +* +* If it's some other error, just die and let the kernel sort it out. +*/ +void die (void ) +{ +float end_time; +int fd; + +switch (errno) { +case EMFILE : +case ENFILE : +case ENOSPC : +clock_time (&end_time); +printf ("Opened %u files in %.2fs.\n" , nr_opened, + end_time - start_time); +fflush (stdout); + +clock_time (&start_time); +for (fd = min_fd; fd <= max_fd; fd++) +close (fd); +clock_time (&end_time); +printf ("Closed %u files in %.2fs.\n" , nr_opened, + end_time - start_time); +exit (0 ); +break ; +default : +perror ("open?" ); +exit (2 ); +break ; + } +} + +/* Remember how many file we open and all that. */ +void remember_fd (int fd) +{ +if (min_fd ==-1 || min_fd > fd) + min_fd = fd; +if (max_fd ==-1 || max_fd < fd) + max_fd = fd; + nr_opened++; +} + +/* Put an opened file on the unlinked list and leak the fd. */ +void leak_tmpfile (void ) +{ +int fd =-1 ; +int ret; +
src/tmpfile.c line 108
Quoted 10 lines
src/tmpfile.c new file +10
-0+/* Try to create an O_TMPFILE and leak the fd. */ +#ifdef O_TMPFILE + fd =open ("." ,O_TMPFILE |O_RDWR ,0644 ); +if (fd >=0 ) { +remember_fd (fd); +return ; + } +if (fd <0 && errno !=EOPNOTSUPP ) +die (); +#endif
Could we track lack of tmpfile support so we don't repeat the open() call once we know it's going to fail?
Quoted 46 lines
src/tmpfile.c new file +19
-0+ +/* Oh well, create a new file, unlink it, and leak the fd. */ + fd =open ("./moo" ,O_CREAT |O_RDWR ,0644 ); +if (fd <0 ) +die (); + ret =unlink ("./moo" ); +if (ret) +die (); +remember_fd (fd); +} + +/* Try to put as many files on the unlinked list and then kill them. */ +int main (int argc,char *argv[]) +{ +clock_time (&start_time); +while (1 ) +leak_tmpfile (); +return 0 ; +}tests/generic/710 new file +21
-0@@ -0,0 +1,65 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 710 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use only a single CPU to test the single threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 +
tests/generic/710 line 31
Quoted 10 lines
tests/generic/710 new file +10
-0+_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter
Do we need attr/filter?
Quoted 5 lines
tests/generic/710 new file +5
-0+ +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch
tests/generic/710 line 46
Quoted 10 lines
tests/generic/710 new file +10
-0+ +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files
I see the following from the above line when I run this test:
+./tests/generic/710: line 46: test: 18446744073709551615: integer expression expected
Quoted 80 lines
tests/generic/710 new file +19
-0+ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/710.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 710 +silence is goldentests/generic/711 new file +47
-0@@ -0,0 +1,73 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 711 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use every CPU possible to stress the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Try to load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR))
tests/generic/711 line 57
Quoted 10 lines
tests/generic/711 new file +10
-0+max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done
Doesn't this make the first test kind of a subset of this one (where nr_cpus == 1)? If so, could we just do a couple iterations with different nr_cpus values?
I'm wondering if we should have a log recovery test as well, btw.
tests/generic/711 line 60
Quoted 3 lines
tests/generic/711 new file +3
-0+for i in $(seq 1 $nr_cpus); do + wait +done
Can't we just pass the pids forked by the loop above? Though the manpage says wait should wait for all child pids as it is, so perhaps the loop is unnecessary?
Brian
Quoted 220 lines
tests/generic/711 new file +13
-0+ +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/711.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 711 +silence is goldentests/generic/group +2
-0@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlinktests/xfs/736 new file +71
-0@@ -0,0 +1,71 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 736 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code in a single +# threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/736.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 736 +silence is goldentests/xfs/737 new file +79
-0@@ -0,0 +1,79 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 737 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code, using every +# CPU possible. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done +for i in $(seq 1 $nr_cpus); do + wait +done + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/737.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 737 +silence is goldentests/xfs/group +2
-0@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
Quoted 156 lines · Brian Foster
Quoted 155 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.outsrc/Makefile +1
-1@@ -27,7 +27,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ renameat2 t_getcwd e4compact test-nextquota punch-alternating \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ - attr_replace_test swapon mkswap + attr_replace_test swapon mkswap tmpfile SUBDIRS = log-writes perfsrc/tmpfile.c new file +103
-0@@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Oracle. All Rights Reserved. +* Author: Darrick J. Wong <[email protected]> +* +* Test program to open unlinked files and leak them. +*/ +#ifndef _GNU_SOURCE +# define _GNU_SOURCE +#endif +#include <time.h> +#include <unistd.h> +#include <stdlib.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> + +static int min_fd =-1 ; +static int max_fd =-1 ; +static unsigned int nr_opened =0 ; +static float start_time; + +void clock_time (float *time) +{ +static clockid_t clkid =CLOCK_MONOTONIC ; +struct timespec ts; +int ret; + +retry: + ret =clock_gettime (clkid, &ts); +if (ret) { +if (clkid ==CLOCK_MONOTONIC ) { + clkid =CLOCK_REALTIME ; + goto retry; + } +perror ("clock_gettime" ); +exit (2 ); + } + *time = ts.tv_sec + ((float )ts.tv_nsec /1000000000 ); +} + +/* +* Exit the program due to an error. +* +* If we've exhausted all the file descriptors, make sure we close all the +* open fds in the order we received them in order to exploit a quirk of ext4 +* and xfs where the oldest unlinked inodes are at the /end/ of the unlinked +* lists, which will make removing the unlinked files maximally painful. +* +* If it's some other error, just die and let the kernel sort it out. +*/ +void die (void ) +{ +float end_time; +int fd; + +switch (errno) { +case EMFILE : +case ENFILE : +case ENOSPC : +clock_time (&end_time); +printf ("Opened %u files in %.2fs.\n" , nr_opened, + end_time - start_time); +fflush (stdout); + +clock_time (&start_time); +for (fd = min_fd; fd <= max_fd; fd++) +close (fd); +clock_time (&end_time); +printf ("Closed %u files in %.2fs.\n" , nr_opened, + end_time - start_time); +exit (0 ); +break ; +default : +perror ("open?" ); +exit (2 ); +break ; + } +} + +/* Remember how many file we open and all that. */ +void remember_fd (int fd) +{ +if (min_fd ==-1 || min_fd > fd) + min_fd = fd; +if (max_fd ==-1 || max_fd < fd) + max_fd = fd; + nr_opened++; +} + +/* Put an opened file on the unlinked list and leak the fd. */ +void leak_tmpfile (void ) +{ +int fd =-1 ; +int ret; + +/* Try to create an O_TMPFILE and leak the fd. */ +#ifdef O_TMPFILE + fd =open ("." ,O_TMPFILE |O_RDWR ,0644 ); +if (fd >=0 ) { +remember_fd (fd);
Quoted 8 lines
src/tmpfile.c line 108
Quoted 5 lines
src/tmpfile.c new file +5
-0+ return; + } +if (fd <0 && errno !=EOPNOTSUPP ) +die (); +#endif Could we track lack of tmpfile support so we don't repeat the
open()call once we know it's going to fail?
Ok.
Quoted 50 lines
Quoted 50 lines
src/tmpfile.c new file +19
-0+ +/* Oh well, create a new file, unlink it, and leak the fd. */ + fd =open ("./moo" ,O_CREAT |O_RDWR ,0644 ); +if (fd <0 ) +die (); + ret =unlink ("./moo" ); +if (ret) +die (); +remember_fd (fd); +} + +/* Try to put as many files on the unlinked list and then kill them. */ +int main (int argc,char *argv[]) +{ +clock_time (&start_time); +while (1 ) +leak_tmpfile (); +return 0 ; +}tests/generic/710 new file +25
-0@@ -0,0 +1,65 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 710 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use only a single CPU to test the single threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.*
Quoted 8 lines
tests/generic/710 line 31
Quoted 6 lines
tests/generic/710 new file +6
-0+} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filterDo we need attr/filter?
Nope.
Quoted 18 lines
Quoted 5 lines
tests/generic/710 new file +5
-0+ +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratchtests/generic/710 line 46
Quoted 10 lines
tests/generic/710 new file +10
-0+ +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_filesI see the following from the above line when I run this test:
Quoted 1 line
+./tests/generic/710: line 46: test: 18446744073709551615: integer expression expected
Weird... it's supposed to be set based on the amount of RAM you have.
Quoted 86 lines
Quoted 86 lines
tests/generic/710 new file +19
-0+ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/710.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 710 +silence is goldentests/generic/711 new file +53
-0@@ -0,0 +1,73 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 711 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use every CPU possible to stress the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Try to load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full
Quoted 8 lines
tests/generic/711 line 57
Quoted 4 lines
tests/generic/711 new file +4
-0+program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +doneDoesn't this make the first test kind of a subset of this one (where
nr_cpus== 1)? If so, could we just do a couple iterations with differentnr_cpusvalues?
I think it's fine only to have the multithreaded version, that should stress the AGs well enough.
Quoted 1 line
I'm wondering if we should have a log recovery test as well, btw.
Yes. I'll turn g/710 and x/736 into the log recovery tests.
(Oh wow flood of asserts this is going to take a while to straighten out)
Quoted 7 lines
tests/generic/711 line 60
Quoted 3 lines
tests/generic/711 new file +3
-0+for i in $(seq 1 $nr_cpus); do + wait +doneCan't we just pass the pids forked by the loop above? Though the manpage says wait should wait for all child pids as it is, so perhaps the loop is unnecessary?
Oh, I did not know that. Thanks for the review!
Quoted 222 lines
Brian
Quoted 220 lines
tests/generic/711 new file +13
-0+ +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/711.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 711 +silence is goldentests/generic/group +2
-0@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlinktests/xfs/736 new file +71
-0@@ -0,0 +1,71 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 736 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code in a single +# threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/736.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 736 +silence is goldentests/xfs/737 new file +79
-0@@ -0,0 +1,79 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 737 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code, using every +# CPU possible. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done +for i in $(seq 1 $nr_cpus); do + wait +done + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/737.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 737 +silence is goldentests/xfs/group +2
-0@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
Quoted 349 lines · Darrick J. Wong
Quoted 156 lines · Brian Foster
Quoted 155 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.outsrc/Makefile +1
-1@@ -27,7 +27,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ renameat2 t_getcwd e4compact test-nextquota punch-alternating \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ - attr_replace_test swapon mkswap + attr_replace_test swapon mkswap tmpfile SUBDIRS = log-writes perfsrc/tmpfile.c new file +103
-0@@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Oracle. All Rights Reserved. +* Author: Darrick J. Wong <[email protected]> +* +* Test program to open unlinked files and leak them. +*/ +#ifndef _GNU_SOURCE +# define _GNU_SOURCE +#endif +#include <time.h> +#include <unistd.h> +#include <stdlib.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <errno.h> + +static int min_fd =-1 ; +static int max_fd =-1 ; +static unsigned int nr_opened =0 ; +static float start_time; + +void clock_time (float *time) +{ +static clockid_t clkid =CLOCK_MONOTONIC ; +struct timespec ts; +int ret; + +retry: + ret =clock_gettime (clkid, &ts); +if (ret) { +if (clkid ==CLOCK_MONOTONIC ) { + clkid =CLOCK_REALTIME ; + goto retry; + } +perror ("clock_gettime" ); +exit (2 ); + } + *time = ts.tv_sec + ((float )ts.tv_nsec /1000000000 ); +} + +/* +* Exit the program due to an error. +* +* If we've exhausted all the file descriptors, make sure we close all the +* open fds in the order we received them in order to exploit a quirk of ext4 +* and xfs where the oldest unlinked inodes are at the /end/ of the unlinked +* lists, which will make removing the unlinked files maximally painful. +* +* If it's some other error, just die and let the kernel sort it out. +*/ +void die (void ) +{ +float end_time; +int fd; + +switch (errno) { +case EMFILE : +case ENFILE : +case ENOSPC : +clock_time (&end_time); +printf ("Opened %u files in %.2fs.\n" , nr_opened, + end_time - start_time); +fflush (stdout); + +clock_time (&start_time); +for (fd = min_fd; fd <= max_fd; fd++) +close (fd); +clock_time (&end_time); +printf ("Closed %u files in %.2fs.\n" , nr_opened, + end_time - start_time); +exit (0 ); +break ; +default : +perror ("open?" ); +exit (2 ); +break ; + } +} + +/* Remember how many file we open and all that. */ +void remember_fd (int fd) +{ +if (min_fd ==-1 || min_fd > fd) + min_fd = fd; +if (max_fd ==-1 || max_fd < fd) + max_fd = fd; + nr_opened++; +} + +/* Put an opened file on the unlinked list and leak the fd. */ +void leak_tmpfile (void ) +{ +int fd =-1 ; +int ret; + +/* Try to create an O_TMPFILE and leak the fd. */ +#ifdef O_TMPFILE + fd =open ("." ,O_TMPFILE |O_RDWR ,0644 ); +if (fd >=0 ) { +remember_fd (fd);Quoted 8 lines
src/tmpfile.c line 108
Quoted 5 lines
src/tmpfile.c new file +5
-0+ return; + } +if (fd <0 && errno !=EOPNOTSUPP ) +die (); +#endif Could we track lack of tmpfile support so we don't repeat the
open()call once we know it's going to fail?Ok.
Quoted 50 lines
Quoted 50 lines
src/tmpfile.c new file +19
-0+ +/* Oh well, create a new file, unlink it, and leak the fd. */ + fd =open ("./moo" ,O_CREAT |O_RDWR ,0644 ); +if (fd <0 ) +die (); + ret =unlink ("./moo" ); +if (ret) +die (); +remember_fd (fd); +} + +/* Try to put as many files on the unlinked list and then kill them. */ +int main (int argc,char *argv[]) +{ +clock_time (&start_time); +while (1 ) +leak_tmpfile (); +return 0 ; +}tests/generic/710 new file +25
-0@@ -0,0 +1,65 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 710 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use only a single CPU to test the single threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.*Quoted 8 lines
tests/generic/710 line 31
Quoted 6 lines
tests/generic/710 new file +6
-0+} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filterDo we need attr/filter?
Nope.
Quoted 18 lines
Quoted 5 lines
tests/generic/710 new file +5
-0+ +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratchtests/generic/710 line 46
Quoted 10 lines
tests/generic/710 new file +10
-0+ +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_filesI see the following from the above line when I run this test:
Quoted 1 line
+./tests/generic/710: line 46: test: 18446744073709551615: integer expression expected
Weird... it's supposed to be set based on the amount of RAM you have.
Quoted 86 lines
Quoted 86 lines
tests/generic/710 new file +19
-0+ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/710.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 710 +silence is goldentests/generic/711 new file +53
-0@@ -0,0 +1,73 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 711 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use every CPU possible to stress the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Try to load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.fullQuoted 8 lines
tests/generic/711 line 57
Quoted 4 lines
tests/generic/711 new file +4
-0+program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +doneDoesn't this make the first test kind of a subset of this one (where
nr_cpus== 1)? If so, could we just do a couple iterations with differentnr_cpusvalues?I think it's fine only to have the multithreaded version, that should stress the AGs well enough.
Quoted 6 lines
Quoted 1 line
I'm wondering if we should have a log recovery test as well, btw.
Yes. I'll turn g/710 and x/736 into the log recovery tests.
(Oh wow flood of asserts this is going to take a while to straighten out)
NFI what this is about, but here's the crash:
XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file: fs/xfs/xfs_log_recover.c, line: 5072
WARNING: CPU: 0 PID: 2936 at fs/xfs/xfs_message.c:104 assfail+0x27/0x2a [xfs] Modules linked in: xfs libcrc32c bfq dax_pmem nd_pmem device_dax sch_fq_codel ip_tables x_tables nfsv4 af_packet CPU: 0 PID: 2936 Comm: mount Tainted: G W 4.20.0-rc6-djw #rc6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:assfail+0x27/0x2a [xfs] Code: 0f 0b c3 0f 1f 44 00 00 48 89 f1 41 89 d0 48 c7 c6 50 aa 34 a0 48 89 fa 31 ff e8 6d f9 ff ff 80 3d 9c 58 0a 00 00 74 02 0f 0b <0f> 0b c3 48 8b b3 a8 02 00 00 48 c7 c7 c8 ae 34 a0 c6 05 08 54 0a RSP: 0018:ffffc90003607c90 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88802f763a80 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa033ce6f RBP: ffff88802f763c50 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: f000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88803d6b5000 R15: 0000000000000000 FS: 00007f67fe2ea080(0000) GS:ffff88803e800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ac0c1ec1d8 CR3: 000000003d47e006 CR4: 00000000001606b0 Call Trace: xlog_recover_process_one_iunlink+0x15e/0x170 [xfs] xlog_recover_process_iunlinks.isra.50+0x7c/0xc0 [xfs] xlog_recover_finish+0x33/0xa0 [xfs] xfs_log_mount_finish+0x5f/0x100 [xfs] xfs_mountfs+0x568/0x990 [xfs] ? xfs_mru_cache_create+0x172/0x1d0 [xfs] xfs_fs_fill_super+0x4d1/0x6d0 [xfs] ? xfs_test_remount_options+0x60/0x60 [xfs] mount_bdev+0x17f/0x1b0 mount_fs+0x15/0x7d vfs_kern_mount.part.43+0x54/0x160 do_mount+0x1d2/0xd90 ? memdup_user+0x4b/0x70 ksys_mount+0xba/0xd0 __x64_sys_mount+0x21/0x30 do_syscall_64+0x50/0x160 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f67fdbad3ca Code: 48 8b 0d c1 8a 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8e 8a 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff05981278 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 000055ac0c1e4a40 RCX: 00007f67fdbad3ca RDX: 000055ac0c1ebd90 RSI: 000055ac0c1e4c40 RDI: 000055ac0c1e4c20 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000c0ed0000 R11: 0000000000000206 R12: 000055ac0c1e4c20 R13: 000055ac0c1ebd90 R14: 0000000000000000 R15: 00007f67fe0ce8a4 irq event stamp: 60960 hardirqs last enabled at (60959): [<ffffffff810cac15>] console_unlock+0x435/0x5e0 hardirqs last disabled at (60960): [<ffffffff81001ba0>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (60956): [<ffffffff81a003a8>] __do_softirq+0x3a8/0x4bd softirqs last disabled at (60943): [<ffffffff8106166c>] irq_exit+0xbc/0xe0 ---[ end trace f0ce4aa6d3ed581f ]---
<over and over and over>
XFS (pmem4): xfs_do_force_shutdown(0x8) called from line 368 of file fs/xfs/xfs_trans.c. Return address = ffffffffa02edf93 XFS (pmem4): Corruption of in-memory data detected. Shutting down filesystem
XFS (pmem4): Please unmount the filesystem and rectify the problem(s)
XFS (pmem4): xfs_imap_to_bp: xfs_trans_read_buf() returned error -5.
XFS (pmem4): xlog_recover_clear_agi_bucket: failed to clear agi 0. Continuing.
<over and over and over>
Reproduces on scsi disk too. Nightnight.
--D
Quoted 232 lines
Quoted 7 lines
tests/generic/711 line 60
Quoted 3 lines
tests/generic/711 new file +3
-0+for i in $(seq 1 $nr_cpus); do + wait +doneCan't we just pass the pids forked by the loop above? Though the manpage says wait should wait for all child pids as it is, so perhaps the loop is unnecessary?
Oh, I did not know that. Thanks for the review!
Quoted 222 lines
Brian
Quoted 220 lines
tests/generic/711 new file +13
-0+ +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/711.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 711 +silence is goldentests/generic/group +2
-0@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlinktests/xfs/736 new file +71
-0@@ -0,0 +1,71 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 736 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code in a single +# threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/736.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 736 +silence is goldentests/xfs/737 new file +79
-0@@ -0,0 +1,79 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 737 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code, using every +# CPU possible. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done +for i in $(seq 1 $nr_cpus); do + wait +done + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/737.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 737 +silence is goldentests/xfs/group +2
-0@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
Quoted 36 lines · Darrick J. Wong
Quoted 35 lines · Darrick J. Wong
Quoted 34 lines · Brian Foster
Quoted 33 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.out
...
Quoted 11 lines
Quoted 7 lines
Quoted 2 lines
I'm wondering if we should have a log recovery test as well, btw.
Yes. I'll turn g/710 and x/736 into the log recovery tests.
(Oh wow flood of asserts this is going to take a while to straighten out)
NFI what this is about, but here's the crash:
XFS: Assertion failed: VFS_I(ip)->i_nlink == 0, file:
fs/xfs/xfs_log_recover.c, line: 5072
Heh, we somehow end up with (what looks like) a linked inode on the unlinked list..?
Brian
Quoted 294 lines
WARNING: CPU: 0 PID: 2936 at fs/xfs/xfs_message.c:104 assfail+0x27/0x2a [xfs] Modules linked in: xfs libcrc32c bfq dax_pmem nd_pmem device_dax sch_fq_codel ip_tables x_tables nfsv4 af_packet CPU: 0 PID: 2936 Comm: mount Tainted: G W 4.20.0-rc6-djw #rc6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:assfail+0x27/0x2a [xfs] Code: 0f 0b c3 0f 1f 44 00 00 48 89 f1 41 89 d0 48 c7 c6 50 aa 34 a0 48 89 fa 31 ff e8 6d f9 ff ff 80 3d 9c 58 0a 00 00 74 02 0f 0b <0f> 0b c3 48 8b b3 a8 02 00 00 48 c7 c7 c8 ae 34 a0 c6 05 08 54 0a RSP: 0018:ffffc90003607c90 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88802f763a80 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa033ce6f RBP: ffff88802f763c50 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000a R11: f000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: ffff88803d6b5000 R15: 0000000000000000 FS: 00007f67fe2ea080(0000) GS:ffff88803e800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ac0c1ec1d8 CR3: 000000003d47e006 CR4: 00000000001606b0 Call Trace: xlog_recover_process_one_iunlink+0x15e/0x170 [xfs] xlog_recover_process_iunlinks.isra.50+0x7c/0xc0 [xfs] xlog_recover_finish+0x33/0xa0 [xfs] xfs_log_mount_finish+0x5f/0x100 [xfs] xfs_mountfs+0x568/0x990 [xfs] ? xfs_mru_cache_create+0x172/0x1d0 [xfs] xfs_fs_fill_super+0x4d1/0x6d0 [xfs] ? xfs_test_remount_options+0x60/0x60 [xfs] mount_bdev+0x17f/0x1b0 mount_fs+0x15/0x7d vfs_kern_mount.part.43+0x54/0x160 do_mount+0x1d2/0xd90 ? memdup_user+0x4b/0x70 ksys_mount+0xba/0xd0 __x64_sys_mount+0x21/0x30 do_syscall_64+0x50/0x160 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f67fdbad3ca Code: 48 8b 0d c1 8a 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8e 8a 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff05981278 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 000055ac0c1e4a40 RCX: 00007f67fdbad3ca RDX: 000055ac0c1ebd90 RSI: 000055ac0c1e4c40 RDI: 000055ac0c1e4c20 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000c0ed0000 R11: 0000000000000206 R12: 000055ac0c1e4c20 R13: 000055ac0c1ebd90 R14: 0000000000000000 R15: 00007f67fe0ce8a4 irq event stamp: 60960 hardirqs last enabled at (60959): [<ffffffff810cac15>] console_unlock+0x435/0x5e0 hardirqs last disabled at (60960): [<ffffffff81001ba0>] trace_hardirqs_off_thunk+0x1a/0x1c softirqs last enabled at (60956): [<ffffffff81a003a8>] __do_softirq+0x3a8/0x4bd softirqs last disabled at (60943): [<ffffffff8106166c>] irq_exit+0xbc/0xe0 ---[ end trace f0ce4aa6d3ed581f ]---<over and over and over>
XFS (pmem4):
xfs_do_force_shutdown(0x8)called from line 368 of filefs/xfs/xfs_trans.c. Return address =ffffffffa02edf93XFS (pmem4): Corruption of in-memory data detected. Shutting down filesystem
XFS (pmem4): Please unmount the filesystem and rectify the problem(s)
XFS (pmem4):xfs_imap_to_bp:xfs_trans_read_buf()returned error -5.
XFS (pmem4):xlog_recover_clear_agi_bucket: failed to clear agi 0. Continuing.<over and over and over>
Reproduces on scsi disk too. Nightnight.
--D
Quoted 232 lines
Quoted 7 lines
tests/generic/711 line 60
Quoted 3 lines
tests/generic/711 new file +3
-0+for i in $(seq 1 $nr_cpus); do + wait +doneCan't we just pass the pids forked by the loop above? Though the manpage says wait should wait for all child pids as it is, so perhaps the loop is unnecessary?
Oh, I did not know that. Thanks for the review!
Quoted 222 lines
Brian
Quoted 220 lines
tests/generic/710 new file +13
-0+ +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/711.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 711 +silence is goldentests/generic/group +2
-0@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlinktests/xfs/736 new file +71
-0@@ -0,0 +1,71 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 736 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code in a single +# threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/736.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 736 +silence is goldentests/xfs/737 new file +79
-0@@ -0,0 +1,79 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 737 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code, using every +# CPU possible. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done +for i in $(seq 1 $nr_cpus); do + wait +done + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/737.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 737 +silence is goldentests/xfs/group +2
-0@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
In reply to Darrick J. WongQuoted 35 lines · Darrick J. Wong
Quoted 34 lines · Brian Foster
Quoted 33 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.out
...
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
tests/generic/710 new file +0
-0@@ -0,0 +1,65 @@
...
Quoted 18 lines
Quoted 18 lines
Quoted 5 lines
tests/generic/710 new file +5
-0+ +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratchtests/generic/710 line 46
Quoted 10 lines
tests/generic/710 new file +10
-0+ +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_filesI see the following from the above line when I run this test:
Quoted 4 lines
Quoted 1 line
+./tests/generic/710: line 46: test: 18446744073709551615: integer expression expected
Weird... it's supposed to be set based on the amount of RAM you have.
Strange indeed. I added some tracepoints that show it's initialized to something reasonable on boot. I added another to determine what might be changing it to -1:
<idle>-0 [000] ...1 0.630877: files_maxfiles_init: 386: nr_pages 996312 nr_free_pages 994058 memreserve 3381
<idle>-0 [000] ...1 0.630879: files_maxfiles_init: 392: memreserve 3381 n 397172 NR_FILE 8192 max_files 397172
systemd-1 [002] .... 2.732128: proc_filemax: 2879: max_files 18446744073709551615
systemd-1 [000] .... 9.303595: proc_filemax: 2879: max_files 18446744073709551615So systemd is changing it for some reason. *shrug* not sure it really matters that much, but it might be worth massaging the input to handle the max value somehow or another.
Brian
Quoted 337 lines
Quoted 86 lines
Quoted 86 lines
tests/generic/710 new file +19
-0+ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/710.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 710 +silence is goldentests/generic/711 new file +53
-0@@ -0,0 +1,73 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 711 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use every CPU possible to stress the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Try to load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.fullQuoted 8 lines
tests/generic/711 line 57
Quoted 4 lines
tests/generic/711 new file +4
-0+program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +doneDoesn't this make the first test kind of a subset of this one (where
nr_cpus== 1)? If so, could we just do a couple iterations with differentnr_cpusvalues?I think it's fine only to have the multithreaded version, that should stress the AGs well enough.
Quoted 1 line
I'm wondering if we should have a log recovery test as well, btw.
Yes. I'll turn g/710 and x/736 into the log recovery tests.
(Oh wow flood of asserts this is going to take a while to straighten out)
Quoted 7 lines
tests/generic/711 line 60
Quoted 3 lines
tests/generic/711 new file +3
-0+for i in $(seq 1 $nr_cpus); do + wait +doneCan't we just pass the pids forked by the loop above? Though the manpage says wait should wait for all child pids as it is, so perhaps the loop is unnecessary?
Oh, I did not know that. Thanks for the review!
Quoted 222 lines
Brian
Quoted 220 lines
tests/generic/711 new file +13
-0+ +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/711.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 711 +silence is goldentests/generic/group +2
-0@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlinktests/xfs/736 new file +71
-0@@ -0,0 +1,71 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 736 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code in a single +# threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/736.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 736 +silence is goldentests/xfs/737 new file +79
-0@@ -0,0 +1,79 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 737 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code, using every +# CPU possible. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done +for i in $(seq 1 $nr_cpus); do + wait +done + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/737.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 737 +silence is goldentests/xfs/group +2
-0@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
Quoted 71 lines · Brian Foster
Quoted 35 lines · Darrick J. Wong
Quoted 34 lines · Brian Foster
Quoted 33 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.out...
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
tests/generic/710 new file +0
-0@@ -0,0 +1,65 @@...
Quoted 18 lines
Quoted 18 lines
Quoted 5 lines
tests/generic/710 new file +5
-0+ +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratchtests/generic/710 line 46
Quoted 10 lines
tests/generic/710 new file +10
-0+ +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_filesI see the following from the above line when I run this test:
Quoted 4 lines
Quoted 1 line
+./tests/generic/710: line 46: test: 18446744073709551615: integer expression expected
Weird... it's supposed to be set based on the amount of RAM you have.
Strange indeed. I added some tracepoints that show it's initialized to something reasonable on boot. I added another to determine what might be changing it to -1:
Quoted 8 lines
<idle>-0 [000] ...1 0.630877: files_maxfiles_init: 386: nr_pages 996312 nr_free_pages 994058 memreserve 3381 <idle>-0 [000] ...1 0.630879: files_maxfiles_init: 392: memreserve 3381 n 397172 NR_FILE 8192 max_files 397172 systemd-1 [002] .... 2.732128: proc_filemax: 2879: max_files 18446744073709551615 systemd-1 [000] .... 9.303595: proc_filemax: 2879: max_files 18446744073709551615So systemd is changing it for some reason. *shrug* not sure it really matters that much, but it might be worth massaging the input to handle the max value somehow or another.
Yeah, I'll change it to be more robust. Do you have a setting in /etc/sysctl* or is this some weird new systemd thing?
(FWIW systemd 237 on Ubuntu 18.04 doesn't seem to touch file-max)
--D
Quoted 339 lines
Brian
Quoted 337 lines
Quoted 86 lines
Quoted 86 lines
tests/generic/710 new file +19
-0+ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/710.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 710 +silence is goldentests/generic/711 new file +53
-0@@ -0,0 +1,73 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 711 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use every CPU possible to stress the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Try to load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.fullQuoted 8 lines
tests/generic/711 line 57
Quoted 4 lines
tests/generic/711 new file +4
-0+program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +doneDoesn't this make the first test kind of a subset of this one (where
nr_cpus== 1)? If so, could we just do a couple iterations with differentnr_cpusvalues?I think it's fine only to have the multithreaded version, that should stress the AGs well enough.
Quoted 1 line
I'm wondering if we should have a log recovery test as well, btw.
Yes. I'll turn g/710 and x/736 into the log recovery tests.
(Oh wow flood of asserts this is going to take a while to straighten out)
Quoted 7 lines
tests/generic/711 line 60
Quoted 3 lines
tests/generic/711 new file +3
-0+for i in $(seq 1 $nr_cpus); do + wait +doneCan't we just pass the pids forked by the loop above? Though the manpage says wait should wait for all child pids as it is, so perhaps the loop is unnecessary?
Oh, I did not know that. Thanks for the review!
Quoted 222 lines
Brian
Quoted 220 lines
tests/generic/711 new file +13
-0+ +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/711.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 711 +silence is goldentests/generic/group +2
-0@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlinktests/xfs/736 new file +71
-0@@ -0,0 +1,71 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 736 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code in a single +# threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/736.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 736 +silence is goldentests/xfs/737 new file +79
-0@@ -0,0 +1,79 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 737 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code, using every +# CPU possible. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done +for i in $(seq 1 $nr_cpus); do + wait +done + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/737.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 737 +silence is goldentests/xfs/group +2
-0@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
Re: [PATCH 2/2] generic: check the behavior of programs opening a lot of O_TMPFILE files
Quoted 77 lines · Darrick J. Wong
Quoted 76 lines · Brian Foster
Quoted 35 lines · Darrick J. Wong
Quoted 34 lines · Brian Foster
Quoted 33 lines · Darrick J. Wong
From: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
Signed-off-by Darrick J. Wong <[email protected]>--- src/Makefile | 2 - src/tmpfile.c | 127 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 65 +++++++++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 73 ++++++++++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 71 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 79 ++++++++++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 12 files changed, 428 insertions(+), 1 deletion(-) create mode 100644 src/tmpfile.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.out...
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
tests/generic/710 new file +0
-0@@ -0,0 +1,65 @@...
Quoted 18 lines
Quoted 18 lines
Quoted 5 lines
tests/generic/710 new file +5
-0+ +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratchtests/generic/710 line 46
Quoted 10 lines
tests/generic/710 new file +10
-0+ +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_filesI see the following from the above line when I run this test:
Quoted 4 lines
Quoted 1 line
+./tests/generic/710: line 46: test: 18446744073709551615: integer expression expected
Weird... it's supposed to be set based on the amount of RAM you have.
Strange indeed. I added some tracepoints that show it's initialized to something reasonable on boot. I added another to determine what might be changing it to -1:
<idle>-0 [000] ...1 0.630877: files_maxfiles_init: 386: nr_pages 996312 nr_free_pages 994058 memreserve 3381 <idle>-0 [000] ...1 0.630879: files_maxfiles_init: 392: memreserve 3381 n 397172 NR_FILE 8192 max_files 397172 systemd-1 [002] .... 2.732128: proc_filemax: 2879: max_files 18446744073709551615 systemd-1 [000] .... 9.303595: proc_filemax: 2879: max_files 18446744073709551615
Quoted 7 lines
Quoted 3 lines
So systemd is changing it for some reason. *shrug* not sure it really matters that much, but it might be worth massaging the input to handle the max value somehow or another.
Yeah, I'll change it to be more robust. Do you have a setting in
/etc/sysctl*or is this some weird new systemd thing?
Nothing that I'm aware of or set explicitly. grep doesn't show anything, but I'm not sure if there's some differently named setting somewhere that might translate to file-max. This is systemd-241~rc2-2.fc30.x86_64 on fedora rawhide.
Brian
Quoted 343 lines
(FWIW systemd 237 on Ubuntu 18.04 doesn't seem to touch file-max)
--D
Quoted 339 lines
Brian
Quoted 337 lines
Quoted 86 lines
Quoted 86 lines
tests/generic/710 new file +19
-0+ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/710.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 710 +silence is goldentests/generic/711 new file +53
-0@@ -0,0 +1,73 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 711 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Use every CPU possible to stress the filesystem. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Try to load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 50000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((50000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Open a lot of unlinked files +echo create >> $seqres.fullQuoted 8 lines
tests/generic/711 line 57
Quoted 4 lines
tests/generic/711 new file +4
-0+program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +doneDoesn't this make the first test kind of a subset of this one (where
nr_cpus== 1)? If so, could we just do a couple iterations with differentnr_cpusvalues?I think it's fine only to have the multithreaded version, that should stress the AGs well enough.
Quoted 1 line
I'm wondering if we should have a log recovery test as well, btw.
Yes. I'll turn g/710 and x/736 into the log recovery tests.
(Oh wow flood of asserts this is going to take a while to straighten out)
Quoted 7 lines
tests/generic/711 line 60
Quoted 3 lines
tests/generic/711 new file +3
-0+for i in $(seq 1 $nr_cpus); do + wait +doneCan't we just pass the pids forked by the loop above? Though the manpage says wait should wait for all child pids as it is, so perhaps the loop is unnecessary?
Oh, I did not know that. Thanks for the review!
Quoted 222 lines
Brian
Quoted 220 lines
tests/generic/711 new file +13
-0+ +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/generic/711.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 711 +silence is goldentests/generic/group +2
-0@@ -529,3 +529,5 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlinktests/xfs/736 new file +71
-0@@ -0,0 +1,71 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 736 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code in a single +# threaded situation. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(cat /proc/sys/fs/file-max) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +(cd $SCRATCH_MNT ; $program >> $seqres.full) + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/736.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 736 +silence is goldentests/xfs/737 new file +79
-0@@ -0,0 +1,79 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0+ +# Copyright (c) 2019 Oracle, Inc. All Rights Reserved. +# +# FS QA Test No. 737 +# +# Stress test creating a lot of unlinked O_TMPFILE files and closing them +# all at once, checking that we don't blow up the filesystem. This is sort +# of a performance test for the xfs unlinked inode backref patchset, but it +# applies to most other filesystems. +# +# Here we force the use of the slow iunlink bucket walk code, using every +# CPU possible. +# +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" +tmp=/tmp/$$ +status=1 # failure is the default! +testfile=$TEST_DIR/$seq.txt +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -f $tmp.* +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/attr +. ./common/filter +. ./common/inject + +# real QA test starts here +_supported_fs generic +_supported_os Linux +_require_xfs_io_error_injection "iunlink_fallback" +_require_scratch + +rm -f $seqres.full +_scratch_mkfs >> $seqres.full 2>&1 +_scratch_mount + +# Load up all the CPUs, two threads per CPU. +nr_cpus=$(( $(getconf _NPROCESSORS_ONLN) * 2 )) + +# Set ULIMIT_NOFILE to min(file-max, 30000 files per cpu per LOAD_FACTOR) +# so that this test doesn't take forever or OOM the box +max_files=$((30000 * LOAD_FACTOR)) +max_allowable_files=$(( $(cat /proc/sys/fs/file-max) / nr_cpus )) +test $max_files -gt $max_allowable_files && max_files=$max_allowable_files +ulimit -n $max_files + +# Force xfs to use the iunlinked fallback 50% of the time +_scratch_inject_error "iunlink_fallback" "2" + +# Open a lot of unlinked files +echo create >> $seqres.full +program=$PWD/src/tmpfile +for i in $(seq 1 $nr_cpus); do + (mkdir $SCRATCH_MNT/$i ; cd $SCRATCH_MNT/$i ; $program >> $seqres.full) & +done +for i in $(seq 1 $nr_cpus); do + wait +done + +# Unmount to prove that we can clean it all +echo umount >> $seqres.full +before=$(date +%s) +_scratch_unmount +after=$(date +%s) +echo "Unmount took $((after - before))s." >> $seqres.full + +# Mount so that we can run the usual checks +echo silence is golden +_scratch_mount +status=0 +exittests/xfs/737.out new file +2
-0@@ -0,0 +1,2 @@ +QA output created by 737 +silence is goldentests/xfs/group +2
-0@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink
PATCH v2 2/2 generic: check the behavior of programs opening a lot of O_TMPFILE files
In reply to Darrick J. WongFrom: Darrick J. Wong <[email protected]>
Create a test (+ helper program) that opens as many unlinked files as it possibly can on the scratch filesystem, then closes all the files at once to stress-test unlinked file cleanup. Add an xfs-specific test to make sure that the fallback code doesn't bitrot.
---
v2: g/710 and x/736 now test log recovery processing of unlinked inodes
--- .gitignore | 1 src/Makefile | 2 - src/t_open_tmpfiles.c | 166 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/710 | 64 +++++++++++++++++++ tests/generic/710.out | 2 + tests/generic/711 | 70 +++++++++++++++++++++ tests/generic/711.out | 2 + tests/generic/group | 2 + tests/xfs/736 | 90 +++++++++++++++++++++++++++ tests/xfs/736.out | 2 + tests/xfs/737 | 75 ++++++++++++++++++++++ tests/xfs/737.out | 2 + tests/xfs/group | 2 + 13 files changed, 479 insertions(+), 1 deletion(-) create mode 100644 src/t_open_tmpfiles.c create mode 100755 tests/generic/710 create mode 100644 tests/generic/710.out create mode 100755 tests/generic/711 create mode 100644 tests/generic/711.out create mode 100755 tests/xfs/736 create mode 100644 tests/xfs/736.out create mode 100755 tests/xfs/737 create mode 100644 tests/xfs/737.out
.gitignore +1 -0
@@ -135,6 +135,7 @@ /src/t_mmap_writev /src/t_mtab /src/t_ofd_locks +/src/t_open_tmpfiles /src/t_readdir_1 /src/t_readdir_2 /src/t_rename_overwrite
src/Makefile +1 -1
@@ -27,7 +27,7 @@ LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \ renameat2 t_getcwd e4compact test-nextquota punch-alternating \ attr-list-by-handle-cursor-test listxattr dio-interleaved t_dir_type \ dio-invalidate-cache stat_test t_encrypted_d_revalidate \ - attr_replace_test swapon mkswap t_attr_corruption + attr_replace_test swapon mkswap t_attr_corruption t_open_tmpfiles SUBDIRS = log-writes perf
src/t_open_tmpfiles.c new file +166 -0
166 lines not on this page · raw message
tests/generic/710 new file +64 -0
64 lines not on this page · raw message
tests/generic/710.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 710 +silence is golden
tests/generic/711 new file +70 -0
70 lines not on this page · raw message
tests/generic/711.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 711 +silence is golden
tests/generic/group +2 -0
@@ -529,4 +529,6 @@ 524 auto quick 525 auto quick rw 709 auto quick +710 auto quick unlink +711 auto quick unlink 712 auto quick attr
tests/xfs/736 new file +90 -0
90 lines not on this page · raw message
tests/xfs/736.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 736 +silence is golden
tests/xfs/737 new file +75 -0
75 lines not on this page · raw message
tests/xfs/737.out new file +2 -0
@@ -0,0 +1,2 @@ +QA output created by 737 +silence is golden
tests/xfs/group +2 -0
@@ -497,3 +497,5 @@ 497 dangerous_fuzzers dangerous_scrub dangerous_online_repair 498 dangerous_fuzzers dangerous_norepair 499 auto quick +736 auto quick unlink +737 auto quick unlink