power: axp818: Fix typo in axp_set_dldo
PATCH v2 1/1 power: axp818: Fix typo in axp_set_dldo
From: Ondrej Jirman <[email protected]>
Fix typo in axp_set_dldo() so that it correctly uses AXP818_DLDO1_CTRL register to configure the voltage instead of setting AXP818_ELDO1_CTRL register which is obviously incorrect.
Signed-off-by Ondřej Jirman <[email protected]>
---
This was previously sent as a part of other series of patches, but it's unrelated to the rest of the patches, so I'm resending it individually.
v2:
- improved description
drivers/power/axp818.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/power/axp818.c +1 -1
@@ -161,7 +161,7 @@ int axp_set_dldo(int dldo_num, unsigned int mvolt) cfg =axp818_mvolt_to_cfg (mvolt,700 ,3300 ,100 );if (dldo_num ==2 && mvolt >3300 ) cfg +=1 +axp818_mvolt_to_cfg (mvolt,3400 ,4200 ,200 ); - ret =pmic_bus_write (AXP818_ELDO1_CTRL + (dldo_num -1 ), cfg); + ret =pmic_bus_write (AXP818_DLDO1_CTRL + (dldo_num -1 ), cfg);if (ret)return ret;
Signature · 1 line
2.20.1
PATCH v2 1/1 power: axp818: Fix typo in axp_set_dldo
Quoted 9 lines · On Wed, Feb 13, 2019 at 11:21 PM <[email protected]> wrote:
From: Ondrej Jirman <[email protected]>
Fix typo in
axp_set_dldo()so that it correctly usesAXP818_DLDO1_CTRLregister to configure the voltage instead of settingAXP818_ELDO1_CTRLregister which is obviously incorrect.Signed-off-by Ondřej Jirman <[email protected]>---
Applied to u-boot-sunxi/master