mx6ul_14x14_evk: Simplify the PMIC register writes
PATCH 1/2 mx6ul_14x14_evk: Simplify the PMIC register writes
There is no need to store the values written to the PMIC inside the 'reg' variable. Make it simpler by writing the values directly.
Signed-off-by Fabio Estevam <[email protected]>
--- board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c +3 -6
@@ -86,16 +86,13 @@ int power_init_board(void)pmic_reg_write (dev,PFUZE3000_LDOGCTL , reg);/* SW1B step ramp up time from 2us to 4us/25mV */ - reg =0x40 ; -pmic_reg_write (dev,PFUZE3000_SW1BCONF , reg); +pmic_reg_write (dev,PFUZE3000_SW1BCONF ,0x40 );/* SW1B mode to APS/PFM */ - reg =0xc ; -pmic_reg_write (dev,PFUZE3000_SW1BMODE , reg); +pmic_reg_write (dev,PFUZE3000_SW1BMODE ,0xc );/* SW1B standby voltage set to 0.975V */ - reg =0xb ; -pmic_reg_write (dev,PFUZE3000_SW1BSTBY , reg); +pmic_reg_write (dev,PFUZE3000_SW1BSTBY ,0xb );return 0 ; }
Signature · 1 line
2.17.1