Skip to contentSkip to conversation

ARM: da8xxevm: Add NAND instructions for da850-evm to README

PATCH In review Adam Ford 2 participants 2 messages Feb 15, 2019 – Feb 20, 2019

lore
Share & tools
lore

Adam Ford

author
#0 lore raw

PATCH 1/1 ARM: da8xxevm: Add NAND instructions for da850-evm to README

The README.da850 file continues information on how to burn NAND for the LCDK, but not the DA850-EVM. This patch adds both the commands and dip switch instructions for burning and booting NAND.

board/davinci/da8xxevm/README.da850 +8 -0
index f24e8b5342..5775b7d80f 100644
@@ -88,6 +88,14 @@ In this case the commands would be simplified to:
   U-Boot > nand erase.part bootloader
   U-Boot > nand write 0xc0700000 bootloader
 
+On the DA850-EVM, NAND can also be written with SW7:7-8 ON and
+
+  sudo mono sfh_OMAP-L138.exe -targetType AM1808 -p /dev/ttyUSB0 \
+	-flash_noubl -flashType NAND ~/src/u-boot/u-boot.ais
+
+To boot the DA850-EVM from NAND, SW7:5 should be switched on and all others
+off.
+
 Flashing the images to MMC
 ==========================
 If the boot pins are set to boot from mmc, the RBL will try to load the
Signature · 1 line
2.17.1
#1 lore raw

board/davinci/da8xxevm/README.da850

Quoted 9 lines · Adam Ford

The README.da850 file continues information on how to burn NAND for the LCDK, but not the DA850-EVM. This patch adds both the commands and dip switch instructions for burning and booting NAND.

board/davinci/da8xxevm/README.da850 +0 -0
index f24e8b5342..5775b7d80f 100644

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190219/22062922/attachment.sig>