sunxi: Sync Bananapi M2+ dts files and add H5 variant
Subsystems (2)
v2 cover sunxi: Sync Bananapi M2+ dts files and add H5 variant
Hi everyone,
This is version 2 of my Bananapi M2+ H5 variant series.
This series adds support for the H5 variant of the Bananapi M2+, and also renames the MAINTAINERS entry and defconfig for the Bananapi M2+ from its current name, Sinovoip BPI M2+.
Sinovoip is the brand name used for their own VOIP-related products, while the brand name "Bananapi" should be used for single board computers bearing the Bananapi logo. This was confirmed by Bananapi.
Patch 1 syncs up the BPI-M2+ device tree file from Linux v5.0-rc1.
Patch 2 renames the defconfig and maintainer entries to fix the brand name.
Patch 3 adds support for the H5 variant of the Bananapi M2+.
Please have a look.
Regards
ChenYu
Changes in v2:
- Fix "doen" typo
- Drop symlink using original name, and entry for it in MAINTAINERS
- Remove unrelated changes while renaming
Chen-Yu Tsai (3):
sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
sunxi: Add Bananapi M2+ H5 board
arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts | 11 +
arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 190 +-----------------
...2-plus.dts => sunxi-bananapi-m2-plus.dtsi} | 23 ++-
board/sunxi/MAINTAINERS | 12 +-
...efconfig => bananapi_m2_plus_h3_defconfig} | 0
...efconfig => bananapi_m2_plus_h5_defconfig} | 6 +-
6 files changed, 39 insertions(+), 203 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts
copy arch/arm/dts/{sun8i-h3-bananapi-m2-plus.dts => sunxi-bananapi-m2-plus.dtsi} (92%)
copy configs/{Sinovoip_BPI_M2_Plus_defconfig => bananapi_m2_plus_h3_defconfig} (100%)
rename configs/{Sinovoip_BPI_M2_Plus_defconfig => bananapi_m2_plus_h5_defconfig} (85%)Signature · 1 line
2.20.1
PATCH v2 1/3 sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
As of commit aa8fee415f46 ("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the device tree for the Bananapi M2+ has been split into a common dtsi file, and an SoC-specific board device tree file that includes both the shared dtsi file and the soc dtsi file. This was done to support both the H3 and H5 variants of the same board. This is similar to what was done for the Libre Computer ALL-H3-CC in U-boot commit d7b17f1c24af ("sunxi: Split out common board design for ALL-H3-CC device tree").
The newly split files are directly synced from Linux tag v5.0-rc1.
---
Changes in v2:
- Fix "doen" typo
arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts | 190 +-----------------
...2-plus.dts => sunxi-bananapi-m2-plus.dtsi} | 23 ++-
2 files changed, 18 insertions(+), 195 deletions(-)
copy arch/arm/dts/{sun8i-h3-bananapi-m2-plus.dts => sunxi-bananapi-m2-plus.dtsi} (92%)arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts +2 -188
@@ -42,195 +42,9 @@ /dts-v1/; #include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "sunxi-bananapi-m2-plus.dtsi" / { - model = "Banana Pi BPI-M2-Plus"; + model = "Banana Pi BPI-M2-Plus H3"; compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - - pwr_led { - label = "bananapi-m2-plus:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - - sw4 { - label = "power"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; - - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - }; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - status = "okay"; -}; - -&external_mdio { - ext_rgmii_phy: ethernet-phy at 1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi at 1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&pio>; - interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -®_usb0_vbus { - gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - usb0_vbus-supply = <®_usb0_vbus>; - /* USB host VBUS is on as long as VCC-IO is on */ - status = "okay"; };
arch/arm/dts/sunxi-bananapi-m2-plus.dtsi renamed from arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts +16 -7
@@ -40,17 +40,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { - model = "Banana Pi BPI-M2-Plus"; - compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; - aliases { ethernet0 = &emac; serial0 = &uart0;
@@ -108,6 +103,8 @@ compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; };
@@ -140,7 +137,7 @@ &external_mdio { ext_rgmii_phy: ethernet-phy at 1 { compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; + reg = <1>; }; };
@@ -220,7 +217,19 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_vcc3v3>; + vddio-supply = <®_vcc3v3>; + device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + }; }; &usb_otg {
Signature · 1 line
2.20.1
PATCH v2 1/3 sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Quoted 11 lines · Chen-Yu Tsai
As of commit
aa8fee415f46("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the device tree for the Bananapi M2+ has been split into a common dtsi file, and an SoC-specific board device tree file that includes both the shared dtsi file and the soc dtsi file. This was done to support both the H3 and H5 variants of the same board. This is similar to what was done for the Libre Computer ALL-H3-CC in U-boot commitd7b17f1c24af("sunxi: Split out common board design for ALL-H3-CC device tree").The newly split files are directly synced from Linux tag v5.0-rc1.
Based on my previous patch comment, I expected to have full sync with all H3 related files. any plan?
PATCH v2 1/3 sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Quoted 12 lines · On Fri, 15 Feb 2019 19:28:20 +0530 Jagan Teki <[email protected]>…
Quoted 11 lines · Chen-Yu Tsai
As of commit
aa8fee415f46("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the device tree for the Bananapi M2+ has been split into a common dtsi file, and an SoC-specific board device tree file that includes both the shared dtsi file and the soc dtsi file. This was done to support both the H3 and H5 variants of the same board. This is similar to what was done for the Libre Computer ALL-H3-CC in U-boot commitd7b17f1c24af("sunxi: Split out common board design for ALL-H3-CC device tree").
Quoted 4 lines
Quoted 1 line
The newly split files are directly synced from Linux tag v5.0-rc1.
Based on my previous patch comment, I expected to have full sync with all H3 related files. any plan?
Weren't you dismissing the idea because of "past the MW"?
So coming back to that discussion, I was wondering how DT *updates* are actually a new feature (from a U-Boot perspective)?
Actually I see a lot of warnings from dtc about various things in our older .dts's, which spoils buildman runs. From this point of view updating the DTs is a mere fix (as they remove these warnings).
So would you be willing to push for DT updates for this U-Boot release still, if I can show that U-Boot is not affected by the DT updates? Stuff like adding audio DT nodes have actually zero risk of affecting U-Boot ;-)
Cheers,
Andre.
PATCH v2 1/3 sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Quoted 18 lines · Andre Przywara
Quoted 14 lines · On Fri, 15 Feb 2019 19:28:20 +0530 Jagan Teki <[email protected]>…
Quoted 12 lines · Chen-Yu Tsai
As of commit
aa8fee415f46("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the device tree for the Bananapi M2+ has been split into a common dtsi file, and an SoC-specific board device tree file that includes both the shared dtsi file and the soc dtsi file. This was done to support both the H3 and H5 variants of the same board. This is similar to what was done for the Libre Computer ALL-H3-CC in U-boot commitd7b17f1c24af("sunxi: Split out common board design for ALL-H3-CC device tree").The newly split files are directly synced from Linux tag v5.0-rc1.
Quoted 7 lines
Quoted 2 lines
Based on my previous patch comment, I expected to have full sync with all H3 related files. any plan?
Weren't you dismissing the idea because of "past the MW"?
So coming back to that discussion, I was wondering how DT *updates* are actually a new feature (from a U-Boot perspective)?
I would consider as new feature, since I have encountered an mmc issue due to sync[1] atleast some thing broken with sync during MW.
Quoted 6 lines
Actually I see a lot of warnings from dtc about various things in our older .dts's, which spoils buildman runs. From this point of view updating the DTs is a mere fix (as they remove these warnings).
So would you be willing to push for DT updates for this U-Boot release still, if I can show that U-Boot is not affected by the DT updates? Stuff like adding audio DT nodes have actually zero risk of affecting U-Boot ;-)
I don't believe 100% based on my experience with [1] . I agree with above lot of warnings older stuff, but I'm considering dts syncs as part of MW as well to avoid regressions. please see my last PR about sync[2].
[1] https://www.mail-archive.com/linux-sunxi at googlegroups.com/msg29264.html
[2] https://patchwork.ozlabs.org/patch/976408/
PATCH v2 1/3 sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
In reply to Jagan TekiQuoted 12 lines · Jagan Teki
Quoted 10 lines · Chen-Yu Tsai
As of commit
aa8fee415f46("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the device tree for the Bananapi M2+ has been split into a common dtsi file, and an SoC-specific board device tree file that includes both the shared dtsi file and the soc dtsi file. This was done to support both the H3 and H5 variants of the same board. This is similar to what was done for the Libre Computer ALL-H3-CC in U-boot commitd7b17f1c24af("sunxi: Split out common board design for ALL-H3-CC device tree").
Quoted 4 lines
Quoted 1 line
The newly split files are directly synced from Linux tag v5.0-rc1.
Based on my previous patch comment, I expected to have full sync with all H3 related files. any plan?
I thought the plan was to merge these first, then do a full sync for the next merge window?
ChenYu
PATCH v2 1/3 sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Quoted 14 lines · Chen-Yu Tsai
Quoted 12 lines · Jagan Teki
Quoted 10 lines · Chen-Yu Tsai
As of commit
aa8fee415f46("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the device tree for the Bananapi M2+ has been split into a common dtsi file, and an SoC-specific board device tree file that includes both the shared dtsi file and the soc dtsi file. This was done to support both the H3 and H5 variants of the same board. This is similar to what was done for the Libre Computer ALL-H3-CC in U-boot commitd7b17f1c24af("sunxi: Split out common board design for ALL-H3-CC device tree").
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
The newly split files are directly synced from Linux tag v5.0-rc1.
Based on my previous patch comment, I expected to have full sync with all H3 related files. any plan?
I thought the plan was to merge these first, then do a full sync for the next merge window?
OK. will do that this time.
PATCH v2 1/3 sunxi: Sync Bananapi M2+ device tree from Linux v5.0-rc1
Quoted 18 lines · Jagan Teki
Quoted 16 lines · Chen-Yu Tsai
Quoted 14 lines · Jagan Teki
Quoted 11 lines · Chen-Yu Tsai
As of commit
aa8fee415f46("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") in the Linux kernel, the device tree for the Bananapi M2+ has been split into a common dtsi file, and an SoC-specific board device tree file that includes both the shared dtsi file and the soc dtsi file. This was done to support both the H3 and H5 variants of the same board. This is similar to what was done for the Libre Computer ALL-H3-CC in U-boot commitd7b17f1c24af("sunxi: Split out common board design for ALL-H3-CC device tree").The newly split files are directly synced from Linux tag v5.0-rc1.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Based on my previous patch comment, I expected to have full sync with all H3 related files. any plan?
I thought the plan was to merge these first, then do a full sync for the next merge window?
OK. will do that this time.
Thanks. Given the release timing, I suppose we would sync up to the 5.0 release of Linux?
ChenYu
PATCH v2 2/3 sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
In reply to Chen-Yu TsaiThe brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used.
To support the H5 variant of this board, the "H3" suffix is added to the defconfig name.
A symbolic link for the original defconfig, pointing to the new one, is added to keep 3rd party distributions happy.
Also add myself as one of the board maintainers.
As the device tree files were already correctly named, they do not require any changes.
---
Changes in v2:
- Drop symlink using original name, and entry for it in MAINTAINERS
- Remove unrelated changes while renaming
board/sunxi/MAINTAINERS | 11 ++++++-----
...2_Plus_defconfig => bananapi_m2_plus_h3_defconfig} | 0
2 files changed, 6 insertions(+), 5 deletions(-)
rename configs/{Sinovoip_BPI_M2_Plus_defconfig => bananapi_m2_plus_h3_defconfig} (100%)board/sunxi/MAINTAINERS +6 -5
@@ -137,6 +137,12 @@ M: Jagan Teki <[email protected]> S: Maintained F: configs/bananapi_m2_berry_defconfig +BANANAPI M2 PLUS H3 BOARD +M: Icenowy Zheng <[email protected]> +M: Chen-Yu Tsai <[email protected]> +S: Maintained +F: configs/bananapi_m2_plus_h3_defconfig + BANANAPI M2 ULTRA BOARD M: Chen-Yu Tsai <[email protected]> S: Maintained
@@ -418,11 +424,6 @@ S: Maintained F: configs/Sinlinx_SinA33_defconfig W: http://linux-sunxi.org/Sinlinx_SinA33 -SINOVOIP BPI M2 PLUS H3 BOARD -M: Icenowy Zheng <[email protected]> -S: Maintained -F: configs/Sinovoip_BPI_M2_Plus_defconfig - SINOVOIP BPI M3 A83T BOARD M: VishnuPatekar <[email protected]> S: Maintained
configs/bananapi_m2_plus_h3_defconfig renamed from configs/Sinovoip_BPI_M2_Plus_defconfig +0 -0
Signature · 1 line
2.20.1
PATCH v2 2/3 sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Quoted 7 lines · Chen-Yu Tsai
The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used.
Quoted 5 lines
To support the H5 variant of this board, the "H3" suffix is added to the defconfig name.
A symbolic link for the original defconfig, pointing to the new one, is added to keep 3rd party distributions happy.
Look like you forgot to remove this since it's copy of defconfig not symlink. If you are OK, I will update while applying.
PATCH v2 2/3 sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Quoted 9 lines · Jagan Teki
Quoted 7 lines · Chen-Yu Tsai
The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used.
Quoted 8 lines
Quoted 5 lines
To support the H5 variant of this board, the "H3" suffix is added to the defconfig name.
A symbolic link for the original defconfig, pointing to the new one, is added to keep 3rd party distributions happy.
Look like you forgot to remove this since it's copy of defconfig not symlink. If you are OK, I will update while applying.
Yeah. I forgot. Please remove it when applying.
Thanks
ChenYu
PATCH v2 2/3 sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Quoted 14 lines · Chen-Yu Tsai
Quoted 12 lines · Jagan Teki
Quoted 10 lines · Chen-Yu Tsai
The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used.
To support the H5 variant of this board, the "H3" suffix is added to the defconfig name.
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
A symbolic link for the original defconfig, pointing to the new one, is added to keep 3rd party distributions happy.
Look like you forgot to remove this since it's copy of defconfig not symlink. If you are OK, I will update while applying.
Yeah. I forgot. Please remove it when applying.
Applied all to u-boot-sunxi/master
PATCH v2 3/3 sunxi: Add Bananapi M2+ H5 board
In reply to Chen-Yu TsaiAs the H5 is pin compatible with the H3, vendors tend to upgrade their existing H3 products with an H5 SoC swap. This is the case with the Bananapi M2+ H5.
Add the following to support it:
- device tree file: synced from Linux v5.0-rc1,
- defconfig: copy of bananapi_m2_plus_h3_defconfig with only SoC family and default device tree file name changed
- MAINTAINERS entry
---
Changes in v2: None
arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts | 11 +++++++++++
board/sunxi/MAINTAINERS | 3 ++-
...lus_h3_defconfig => bananapi_m2_plus_h5_defconfig} | 6 +++---
3 files changed, 16 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts
copy configs/{bananapi_m2_plus_h3_defconfig => bananapi_m2_plus_h5_defconfig} (85%)arch/arm/dts/sun50i-h5-bananapi-m2-plus.dts new file +11 -0
@@ -0,0 +1,11 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2018 Chen-Yu Tsai <[email protected]> + +/dts-v1/; +#include "sun50i-h5.dtsi" +#include <sunxi-bananapi-m2-plus.dtsi> + +/ { + model = "Banana Pi BPI-M2-Plus H5"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun50i-h5"; +};
board/sunxi/MAINTAINERS +2 -1
@@ -137,11 +137,12 @@ M: Jagan Teki <[email protected]> S: Maintained F: configs/bananapi_m2_berry_defconfig -BANANAPI M2 PLUS H3 BOARD +BANANAPI M2 PLUS BOARDS M: Icenowy Zheng <[email protected]> M: Chen-Yu Tsai <[email protected]> S: Maintained F: configs/bananapi_m2_plus_h3_defconfig +F: configs/bananapi_m2_plus_h5_defconfig BANANAPI M2 ULTRA BOARD M: Chen-Yu Tsai <[email protected]>
configs/bananapi_m2_plus_h5_defconfig renamed from configs/bananapi_m2_plus_h3_defconfig +3 -3
@@ -1,7 +1,7 @@ CONFIG_ARM=y CONFIG_ARCH_SUNXI=y CONFIG_SPL=y -CONFIG_MACH_SUN8I_H3=y +CONFIG_MACH_SUN50I_H5=y CONFIG_DRAM_CLK=672 CONFIG_DRAM_ZQ=3881979 CONFIG_DRAM_ODT_EN=y
@@ -12,9 +12,9 @@ CONFIG_NR_DRAM_BANKS=1 # CONFIG_CMD_FLASH is not set # CONFIG_SPL_DOS_PARTITION is not set # CONFIG_SPL_EFI_PARTITION is not set -CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-bananapi-m2-plus" +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-bananapi-m2-plus" CONFIG_SUN8I_EMAC=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_EHCI_HCD=y CONFIG_USB_MUSB_GADGET=y CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
Signature · 1 line
2.20.1