rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
PATCH v3 1/2 rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar module with I2C interface.
v3:
- Move validity check before reading time registers
- Add V1F/V2F check before reading the temperature
- Fix missing check of a return value
v2:
- Remove a package denomination in variable names and files
- Fix read/write time registers length
- Replace regmap_update_bits with regmap_write during probing
- Add a check and reset for PON, V2F, V1F registers
- Rename registers according to the datasheet
--- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-ab-eoz9.c | 465 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 476 insertions(+) create mode 100644 drivers/rtc/rtc-ab-eoz9.c
drivers/rtc/Kconfig +10 -0
@@ -185,6 +185,16 @@ config RTC_DRV_ABB5ZES3 This driver can also be built as a module. If so, the module will be called rtc-ab-b5ze-s3. +config RTC_DRV_ABEOZ9 + select REGMAP_I2C + tristate "Abracon AB-RTCMC-32.768kHz-EOZ9" + help + If you say yes here you get support for the Abracon + AB-RTCMC-32.768kHz-EOA9 I2C RTC chip. + + This driver can also be built as a module. If so, the module + will be called rtc-ab-e0z9. + config RTC_DRV_ABX80X tristate "Abracon ABx80x" select WATCHDOG_CORE if WATCHDOG
drivers/rtc/Makefile +1 -0
@@ -28,6 +28,7 @@ obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o obj-$(CONFIG_RTC_DRV_ABB5ZES3) += rtc-ab-b5ze-s3.o +obj-$(CONFIG_RTC_DRV_ABEOZ9) += rtc-ab-eoz9.o obj-$(CONFIG_RTC_DRV_ABX80X) += rtc-abx80x.o obj-$(CONFIG_RTC_DRV_AC100) += rtc-ac100.o obj-$(CONFIG_RTC_DRV_ARMADA38X) += rtc-armada38x.o
drivers/rtc/rtc-ab-eoz9.c new file +465 -0
465 lines not on this page · raw message
Signature · 1 line
2.19.1
Quoted 15 lines · Artem Panfilov
This patch adds support for AB-RTCMC-32.768kHz-EOZ9 RTC/Calendar module with I2C interface.
v3:
- Move validity check before reading time registers
- Add V1F/V2F check before reading the temperature
- Fix missing check of a return valuev2:
- Remove a package denomination in variable names and files
- Fix read/write time registers length
- Replaceregmap_update_bitswithregmap_writeduring probing
- Add a check and reset for PON, V2F, V1F registers
- Rename registers according to the datasheet
Quoted 8 lines
Signed-off-by Artem Panfilov <[email protected]>--- drivers/rtc/Kconfig | 10 + drivers/rtc/Makefile | 1 + drivers/rtc/rtc-ab-eoz9.c | 465 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 476 insertions(+) create mode 100644 drivers/rtc/rtc-ab-eoz9.c
Applied, thanks.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com