Skip to contentSkip to conversation

ASoC: codecs: ad193x: Several fixes and imprevements

PATCH In review [email protected] 2 participants 12 messages Feb 18, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover ASoC: codecs: ad193x: Several fixes and imprevements

From: Codrin Ciubotariu <[email protected]>

This patch set contains some changes I needed to make I2S and TDM (DSP_A) formats work. I tested only with ad1936, but the patches should work fine for all the codecs that use this driver. Although I checked the DS for all of them (I hope) to assure that the patches apply, I would really appreciate if someone else can test them on another codec.

Codrin Ciubotariu (5):
ASoC: codecs: ad193x: Remove capture support for codecs without ADC
ASoC: codecs: ad193x: Set constraint to always have 32 sample bits
ASoC: codecs: ad193x: Fix frame polarity for DSP_A format
ASoC: codecs: ad193x: Add runtime support for DSP_A and I2S modes
ASoC: codecs: ad193x: Add support to disable on-chip PLL

 sound/soc/codecs/ad193x.c | 76 ++++++++++++++++++++++++++++++++++++---
 sound/soc/codecs/ad193x.h |  8 +++++
 2 files changed, 80 insertions(+), 4 deletions(-)
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/5 ASoC: codecs: ad193x: Remove capture support for codecs without ADC

From: Codrin Ciubotariu <[email protected]>

Some ad193x codecs don't have ADCs, so they have no capture capabilities. This way, we can use this driver in multicodec cards.

---
 sound/soc/codecs/ad193x.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
sound/soc/codecs/ad193x.c +18 -1
index 4b60ebee491d..21a38cc9e3da 100644
@@ -351,6 +351,20 @@ static struct snd_soc_dai_driver ad193x_dai = {
 	.ops = &ad193x_dai_ops,
 };
 
+/* codec DAI instance for DAC only */
+static struct snd_soc_dai_driver ad193x_no_adc_dai = {
+	.name = "ad193x-hifi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 8,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+	},
+	.ops = &ad193x_dai_ops,
+};
+
 static int ad193x_component_probe(struct snd_soc_component *component)
 {
 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
@@ -444,8 +458,11 @@ int ad193x_probe(struct device *dev, struct regmap *regmap,
 
 	dev_set_drvdata(dev, ad193x);
 
+	if (ad193x_has_adc(ad193x))
+		return devm_snd_soc_register_component(dev, &soc_component_dev_ad193x,
+						       &ad193x_dai, 1);
 	return devm_snd_soc_register_component(dev, &soc_component_dev_ad193x,
-		&ad193x_dai, 1);
+		&ad193x_no_adc_dai, 1);
 }
 EXPORT_SYMBOL_GPL(ad193x_probe);
 
Signature · 1 line
2.17.1
maintainer
#2 lore raw

Applied "ASoC: codecs: ad193x: Remove capture support for codecs without ADC" to the asoc tree

The patch

ASoC: codecs: ad193x: Remove capture support for codecs without ADC

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 7aac8d13fc60db3ec2422f26c4dc2425a7fef20c Mon Sep 17 00:00:00 2001

From: Codrin Ciubotariu <[email protected]>
Date: Mon, 18 Feb 2019 16:10:28 +0000
Subject: [PATCH] ASoC: codecs: ad193x: Remove capture support for codecs
without ADC

Some ad193x codecs don't have ADCs, so they have no capture capabilities. This way, we can use this driver in multicodec cards.

---
 sound/soc/codecs/ad193x.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
sound/soc/codecs/ad193x.c +18 -1
index 4b60ebee491d..21a38cc9e3da 100644
@@ -351,6 +351,20 @@ static struct snd_soc_dai_driver ad193x_dai = {
 	.ops = &ad193x_dai_ops,
 };
 
+/* codec DAI instance for DAC only */
+static struct snd_soc_dai_driver ad193x_no_adc_dai = {
+	.name = "ad193x-hifi",
+	.playback = {
+		.stream_name = "Playback",
+		.channels_min = 2,
+		.channels_max = 8,
+		.rates = SNDRV_PCM_RATE_48000,
+		.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+	},
+	.ops = &ad193x_dai_ops,
+};
+
 static int ad193x_component_probe(struct snd_soc_component *component)
 {
 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
@@ -444,8 +458,11 @@ int ad193x_probe(struct device *dev, struct regmap *regmap,
 
 	dev_set_drvdata(dev, ad193x);
 
+	if (ad193x_has_adc(ad193x))
+		return devm_snd_soc_register_component(dev, &soc_component_dev_ad193x,
+						       &ad193x_dai, 1);
 	return devm_snd_soc_register_component(dev, &soc_component_dev_ad193x,
-		&ad193x_dai, 1);
+		&ad193x_no_adc_dai, 1);
 }
 EXPORT_SYMBOL_GPL(ad193x_probe);
 
Signature · 1 line
2.20.1
#3 lore raw

PATCH 2/5 ASoC: codecs: ad193x: Set constraint to always have 32 sample bits

In reply to [email protected]

From: Codrin Ciubotariu <[email protected]>

DACs and ADCs on ad193x codecs require a 32 bit slot size. We should assure that no other size is used.

---
 sound/soc/codecs/ad193x.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
sound/soc/codecs/ad193x.c +16 -0
index 21a38cc9e3da..c16c9969d1a0 100644
@@ -37,6 +37,13 @@ static SOC_ENUM_SINGLE_DECL(ad193x_deemp_enum, AD193X_DAC_CTRL2, 1,
 
 static const DECLARE_TLV_DB_MINMAX(adau193x_tlv, -9563, 0);
 
+static const unsigned int ad193x_sb[] = {32};
+
+static struct snd_pcm_hw_constraint_list constr = {
+	.list = ad193x_sb,
+	.count = ARRAY_SIZE(ad193x_sb),
+};
+
 static const struct snd_kcontrol_new ad193x_snd_controls[] = {
 	/* DAC volume control */
 	SOC_DOUBLE_R_TLV("DAC1 Volume", AD193X_DAC_L1_VOL,
@@ -321,7 +328,16 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+static int ad193x_startup(struct snd_pcm_substream *substream,
+			  struct snd_soc_dai *dai)
+{
+	return snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+				   &constr);
+}
+
 static const struct snd_soc_dai_ops ad193x_dai_ops = {
+	.startup = ad193x_startup,
 	.hw_params = ad193x_hw_params,
 	.digital_mute = ad193x_mute,
 	.set_tdm_slot = ad193x_set_tdm_slot,
Signature · 1 line
2.17.1
maintainer
#4 lore raw

Applied "ASoC: codecs: ad193x: Set constraint to always have 32 sample bits" to the asoc tree

The patch

ASoC: codecs: ad193x: Set constraint to always have 32 sample bits

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 75c2ecb4bda296f89d4ea6a42750f48bfcd8a1d9 Mon Sep 17 00:00:00 2001

From: Codrin Ciubotariu <[email protected]>
Date: Mon, 18 Feb 2019 16:10:30 +0000
Subject: [PATCH] ASoC: codecs: ad193x: Set constraint to always have 32 sample
bits

DACs and ADCs on ad193x codecs require a 32 bit slot size. We should assure that no other size is used.

---
 sound/soc/codecs/ad193x.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
sound/soc/codecs/ad193x.c +16 -0
index 21a38cc9e3da..c16c9969d1a0 100644
@@ -37,6 +37,13 @@ static SOC_ENUM_SINGLE_DECL(ad193x_deemp_enum, AD193X_DAC_CTRL2, 1,
 
 static const DECLARE_TLV_DB_MINMAX(adau193x_tlv, -9563, 0);
 
+static const unsigned int ad193x_sb[] = {32};
+
+static struct snd_pcm_hw_constraint_list constr = {
+	.list = ad193x_sb,
+	.count = ARRAY_SIZE(ad193x_sb),
+};
+
 static const struct snd_kcontrol_new ad193x_snd_controls[] = {
 	/* DAC volume control */
 	SOC_DOUBLE_R_TLV("DAC1 Volume", AD193X_DAC_L1_VOL,
@@ -321,7 +328,16 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+static int ad193x_startup(struct snd_pcm_substream *substream,
+			  struct snd_soc_dai *dai)
+{
+	return snd_pcm_hw_constraint_list(substream->runtime, 0,
+				   SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
+				   &constr);
+}
+
 static const struct snd_soc_dai_ops ad193x_dai_ops = {
+	.startup = ad193x_startup,
 	.hw_params = ad193x_hw_params,
 	.digital_mute = ad193x_mute,
 	.set_tdm_slot = ad193x_set_tdm_slot,
Signature · 1 line
2.20.1
#5 lore raw

PATCH 3/5 ASoC: codecs: ad193x: Fix frame polarity for DSP_A format

In reply to [email protected]

From: Codrin Ciubotariu <[email protected]>

By default, the codec starts to interpret the left (first) channel on the falling edge (low polarity) of LRCLK. However, for DSP_A, the left channel needs to start on the rising edge of LRCLK. This patch fixes this channel swap by toggling the bit which selects the LRCLK polarity.

---
 sound/soc/codecs/ad193x.c | 6 ++++++
 1 file changed, 6 insertions(+)
sound/soc/codecs/ad193x.c +6 -0
index c16c9969d1a0..315ec9775118 100644
@@ -228,6 +228,12 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
+	/* For DSP_*, LRCLK's polarity must be inverted */
+	if (fmt & SND_SOC_DAIFMT_DSP_A) {
+		change_bit(ffs(AD193X_DAC_LEFT_HIGH) - 1,
+			   (unsigned long *)&dac_fmt);
+	}
+
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBM_CFM: /* codec clk & frm master */
 		adc_fmt |= AD193X_ADC_LCR_MASTER;
Signature · 1 line
2.17.1
maintainer
#6 lore raw

Applied "ASoC: codecs: ad193x: Fix frame polarity for DSP_A format" to the asoc tree

The patch

ASoC: codecs: ad193x: Fix frame polarity for DSP_A format

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 90f6e68031397fb6212bef5619193cd15707fa0f Mon Sep 17 00:00:00 2001

From: Codrin Ciubotariu <[email protected]>
Date: Mon, 18 Feb 2019 16:10:32 +0000
Subject: [PATCH] ASoC: codecs: ad193x: Fix frame polarity for DSP_A format

By default, the codec starts to interpret the left (first) channel on the falling edge (low polarity) of LRCLK. However, for DSP_A, the left channel needs to start on the rising edge of LRCLK. This patch fixes this channel swap by toggling the bit which selects the LRCLK polarity.

---
 sound/soc/codecs/ad193x.c | 6 ++++++
 1 file changed, 6 insertions(+)
sound/soc/codecs/ad193x.c +6 -0
index c16c9969d1a0..315ec9775118 100644
@@ -228,6 +228,12 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		return -EINVAL;
 	}
 
+	/* For DSP_*, LRCLK's polarity must be inverted */
+	if (fmt & SND_SOC_DAIFMT_DSP_A) {
+		change_bit(ffs(AD193X_DAC_LEFT_HIGH) - 1,
+			   (unsigned long *)&dac_fmt);
+	}
+
 	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
 	case SND_SOC_DAIFMT_CBM_CFM: /* codec clk & frm master */
 		adc_fmt |= AD193X_ADC_LCR_MASTER;
Signature · 1 line
2.20.1
#7 lore raw

PATCH 4/5 ASoC: codecs: ad193x: Add runtime support for DSP_A and I2S modes

In reply to [email protected]

From: Codrin Ciubotariu <[email protected]>

The driver only supports DPS_A for DAC, which is configured at probe. This patch adds support for DSP_A and I2S modes by using the set_fmt() callback.

A trivial break is also removed from a case's default branch.

---
 sound/soc/codecs/ad193x.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
sound/soc/codecs/ad193x.c +7 -2
index 315ec9775118..f8cf182518a3 100644
@@ -188,23 +188,26 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 {
 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(codec_dai->component);
 	unsigned int adc_serfmt = 0;
+	unsigned int dac_serfmt = 0;
 	unsigned int adc_fmt = 0;
 	unsigned int dac_fmt = 0;
 
 	/* At present, the driver only support AUX ADC mode(SND_SOC_DAIFMT_I2S
-	 * with TDM) and ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A)
+	 * with TDM), ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A) and DAC I2S mode
+	 * (SND_SOC_DAIFMT_I2S)
 	 */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		adc_serfmt |= AD193X_ADC_SERFMT_TDM;
+		dac_serfmt |= AD193X_DAC_SERFMT_STEREO;
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
 		adc_serfmt |= AD193X_ADC_SERFMT_AUX;
+		dac_serfmt |= AD193X_DAC_SERFMT_TDM;
 		break;
 	default:
 		if (ad193x_has_adc(ad193x))
 			return -EINVAL;
-		break;
 	}
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
@@ -261,6 +264,8 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		regmap_update_bits(ad193x->regmap, AD193X_ADC_CTRL2,
 				   AD193X_ADC_FMT_MASK, adc_fmt);
 	}
+	regmap_update_bits(ad193x->regmap, AD193X_DAC_CTRL0,
+			   AD193X_DAC_SERFMT_MASK, dac_serfmt);
 	regmap_update_bits(ad193x->regmap, AD193X_DAC_CTRL1,
 		AD193X_DAC_FMT_MASK, dac_fmt);
 
Signature · 1 line
2.17.1
maintainer
#8 lore raw

Applied "ASoC: codecs: ad193x: Add runtime support for DSP_A and I2S modes" to the asoc tree

The patch

ASoC: codecs: ad193x: Add runtime support for DSP_A and I2S modes

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From bccf9c7e14830af0004399d42d861b33c92eacff Mon Sep 17 00:00:00 2001

From: Codrin Ciubotariu <[email protected]>
Date: Mon, 18 Feb 2019 16:10:34 +0000
Subject: [PATCH] ASoC: codecs: ad193x: Add runtime support for DSP_A and I2S
modes

The driver only supports DPS_A for DAC, which is configured at probe. This patch adds support for DSP_A and I2S modes by using the set_fmt() callback.

A trivial break is also removed from a case's default branch.

---
 sound/soc/codecs/ad193x.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
sound/soc/codecs/ad193x.c +7 -2
index 315ec9775118..f8cf182518a3 100644
@@ -188,23 +188,26 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 {
 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(codec_dai->component);
 	unsigned int adc_serfmt = 0;
+	unsigned int dac_serfmt = 0;
 	unsigned int adc_fmt = 0;
 	unsigned int dac_fmt = 0;
 
 	/* At present, the driver only support AUX ADC mode(SND_SOC_DAIFMT_I2S
-	 * with TDM) and ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A)
+	 * with TDM), ADC&DAC TDM mode(SND_SOC_DAIFMT_DSP_A) and DAC I2S mode
+	 * (SND_SOC_DAIFMT_I2S)
 	 */
 	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
 	case SND_SOC_DAIFMT_I2S:
 		adc_serfmt |= AD193X_ADC_SERFMT_TDM;
+		dac_serfmt |= AD193X_DAC_SERFMT_STEREO;
 		break;
 	case SND_SOC_DAIFMT_DSP_A:
 		adc_serfmt |= AD193X_ADC_SERFMT_AUX;
+		dac_serfmt |= AD193X_DAC_SERFMT_TDM;
 		break;
 	default:
 		if (ad193x_has_adc(ad193x))
 			return -EINVAL;
-		break;
 	}
 
 	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
@@ -261,6 +264,8 @@ static int ad193x_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		regmap_update_bits(ad193x->regmap, AD193X_ADC_CTRL2,
 				   AD193X_ADC_FMT_MASK, adc_fmt);
 	}
+	regmap_update_bits(ad193x->regmap, AD193X_DAC_CTRL0,
+			   AD193X_DAC_SERFMT_MASK, dac_serfmt);
 	regmap_update_bits(ad193x->regmap, AD193X_DAC_CTRL1,
 		AD193X_DAC_FMT_MASK, dac_fmt);
 
Signature · 1 line
2.20.1
#9 lore raw

PATCH 5/5 ASoC: codecs: ad193x: Add support to disable on-chip PLL

In reply to [email protected]

From: Codrin Ciubotariu <[email protected]>

The on-chip PLL can be disabled if on the MCLKI pin we have an external clock at 512 x fs. This clock can be used as direct internal clock for ADCs or DACs.
To support this, we add an extra clock id that can be configured using the set_sysclk() callback.

---
 sound/soc/codecs/ad193x.c | 26 +++++++++++++++++++++++++-
 sound/soc/codecs/ad193x.h |  8 ++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)
sound/soc/codecs/ad193x.c +25 -1
index f8cf182518a3..96d7cb2e4a56 100644
@@ -100,6 +100,15 @@ static const struct snd_soc_dapm_widget ad193x_adc_widgets[] = {
 	SND_SOC_DAPM_INPUT("ADC2IN"),
 };
 
+static int ad193x_check_pll(struct snd_soc_dapm_widget *source,
+			    struct snd_soc_dapm_widget *sink)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm);
+	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
+
+	return !!ad193x->sysclk;
+}
+
 static const struct snd_soc_dapm_route audio_paths[] = {
 	{ "DAC", NULL, "SYSCLK" },
 	{ "DAC Output", NULL, "DAC" },
@@ -108,7 +117,7 @@ static const struct snd_soc_dapm_route audio_paths[] = {
 	{ "DAC2OUT", NULL, "DAC Output" },
 	{ "DAC3OUT", NULL, "DAC Output" },
 	{ "DAC4OUT", NULL, "DAC Output" },
-	{ "SYSCLK", NULL, "PLL_PWR" },
+	{ "SYSCLK", NULL, "PLL_PWR", &ad193x_check_pll },
 };
 
 static const struct snd_soc_dapm_route ad193x_adc_audio_paths[] = {
@@ -276,7 +285,22 @@ static int ad193x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_component *component = codec_dai->component;
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
+
+	if (clk_id == AD193X_SYSCLK_MCLK) {
+		/* MCLK must be 512 x fs */
+		if (dir == SND_SOC_CLOCK_OUT || freq != 24576000)
+			return -EINVAL;
+
+		regmap_update_bits(ad193x->regmap, AD193X_PLL_CLK_CTRL1,
+				   AD193X_PLL_SRC_MASK,
+				   AD193X_PLL_DAC_SRC_MCLK |
+				   AD193X_PLL_CLK_SRC_MCLK);
+
+		snd_soc_dapm_sync(dapm);
+		return 0;
+	}
 	switch (freq) {
 	case 12288000:
 	case 18432000:
sound/soc/codecs/ad193x.h +8 -0
index 8b1e65f928d2..27d6afbd7dfb 100644
@@ -31,6 +31,11 @@ int ad193x_probe(struct device *dev, struct regmap *regmap,
 #define AD193X_PLL_INPUT_512    (2 << 1)
 #define AD193X_PLL_INPUT_768    (3 << 1)
 #define AD193X_PLL_CLK_CTRL1    0x01
+#define AD193X_PLL_SRC_MASK	0x03
+#define AD193X_PLL_DAC_SRC_PLL  0
+#define AD193X_PLL_DAC_SRC_MCLK 1
+#define AD193X_PLL_CLK_SRC_PLL  (0 << 1)
+#define AD193X_PLL_CLK_SRC_MCLK	(1 << 1)
 #define AD193X_DAC_CTRL0        0x02
 #define AD193X_DAC_POWERDOWN           0x01
 #define AD193X_DAC_SERFMT_MASK		0xC0
@@ -96,4 +101,7 @@ int ad193x_probe(struct device *dev, struct regmap *regmap,
 
 #define AD193X_NUM_REGS          17
 
+#define AD193X_SYSCLK_PLL	0
+#define AD193X_SYSCLK_MCLK	1
+
 #endif
Signature · 1 line
2.17.1
maintainer
#10 lore raw

Applied "ASoC: codecs: ad193x: Add support to disable on-chip PLL" to the asoc tree

The patch

ASoC: codecs: ad193x: Add support to disable on-chip PLL

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 59529473751e987e28c926838f70aaef588b83b0 Mon Sep 17 00:00:00 2001

From: Codrin Ciubotariu <[email protected]>
Date: Mon, 18 Feb 2019 16:10:36 +0000
Subject: [PATCH] ASoC: codecs: ad193x: Add support to disable on-chip PLL

The on-chip PLL can be disabled if on the MCLKI pin we have an external clock at 512 x fs. This clock can be used as direct internal clock for ADCs or DACs.
To support this, we add an extra clock id that can be configured using the set_sysclk() callback.

---
 sound/soc/codecs/ad193x.c | 26 +++++++++++++++++++++++++-
 sound/soc/codecs/ad193x.h |  8 ++++++++
 2 files changed, 33 insertions(+), 1 deletion(-)
sound/soc/codecs/ad193x.c +25 -1
index f8cf182518a3..96d7cb2e4a56 100644
@@ -100,6 +100,15 @@ static const struct snd_soc_dapm_widget ad193x_adc_widgets[] = {
 	SND_SOC_DAPM_INPUT("ADC2IN"),
 };
 
+static int ad193x_check_pll(struct snd_soc_dapm_widget *source,
+			    struct snd_soc_dapm_widget *sink)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm);
+	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
+
+	return !!ad193x->sysclk;
+}
+
 static const struct snd_soc_dapm_route audio_paths[] = {
 	{ "DAC", NULL, "SYSCLK" },
 	{ "DAC Output", NULL, "DAC" },
@@ -108,7 +117,7 @@ static const struct snd_soc_dapm_route audio_paths[] = {
 	{ "DAC2OUT", NULL, "DAC Output" },
 	{ "DAC3OUT", NULL, "DAC Output" },
 	{ "DAC4OUT", NULL, "DAC Output" },
-	{ "SYSCLK", NULL, "PLL_PWR" },
+	{ "SYSCLK", NULL, "PLL_PWR", &ad193x_check_pll },
 };
 
 static const struct snd_soc_dapm_route ad193x_adc_audio_paths[] = {
@@ -276,7 +285,22 @@ static int ad193x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 		int clk_id, unsigned int freq, int dir)
 {
 	struct snd_soc_component *component = codec_dai->component;
+	struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
 	struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
+
+	if (clk_id == AD193X_SYSCLK_MCLK) {
+		/* MCLK must be 512 x fs */
+		if (dir == SND_SOC_CLOCK_OUT || freq != 24576000)
+			return -EINVAL;
+
+		regmap_update_bits(ad193x->regmap, AD193X_PLL_CLK_CTRL1,
+				   AD193X_PLL_SRC_MASK,
+				   AD193X_PLL_DAC_SRC_MCLK |
+				   AD193X_PLL_CLK_SRC_MCLK);
+
+		snd_soc_dapm_sync(dapm);
+		return 0;
+	}
 	switch (freq) {
 	case 12288000:
 	case 18432000:
sound/soc/codecs/ad193x.h +8 -0
index 8b1e65f928d2..27d6afbd7dfb 100644
@@ -31,6 +31,11 @@ int ad193x_probe(struct device *dev, struct regmap *regmap,
 #define AD193X_PLL_INPUT_512    (2 << 1)
 #define AD193X_PLL_INPUT_768    (3 << 1)
 #define AD193X_PLL_CLK_CTRL1    0x01
+#define AD193X_PLL_SRC_MASK	0x03
+#define AD193X_PLL_DAC_SRC_PLL  0
+#define AD193X_PLL_DAC_SRC_MCLK 1
+#define AD193X_PLL_CLK_SRC_PLL  (0 << 1)
+#define AD193X_PLL_CLK_SRC_MCLK	(1 << 1)
 #define AD193X_DAC_CTRL0        0x02
 #define AD193X_DAC_POWERDOWN           0x01
 #define AD193X_DAC_SERFMT_MASK		0xC0
@@ -96,4 +101,7 @@ int ad193x_probe(struct device *dev, struct regmap *regmap,
 
 #define AD193X_NUM_REGS          17
 
+#define AD193X_SYSCLK_PLL	0
+#define AD193X_SYSCLK_MCLK	1
+
 #endif
Signature · 1 line
2.20.1
#11 lore raw
In reply to [email protected]
Quoted 4 lines · On 18.02.2019 18:10, Codrin Ciubotariu - M19940 wrote:

From: Codrin Ciubotariu <[email protected]>

This patch set contains some changes I needed to make I2S and TDM (DSP_A) formats work. I tested only with ad1936, but the patches

actually, it's ad1934. Sorry about that.

Best regards,
Codrin

Quoted 16 lines

should work fine for all the codecs that use this driver. Although I checked the DS for all of them (I hope) to assure that the patches apply, I would really appreciate if someone else can test them on another codec.

Codrin Ciubotariu (5):
ASoC: codecs: ad193x: Remove capture support for codecs without ADC
ASoC: codecs: ad193x: Set constraint to always have 32 sample bits
ASoC: codecs: ad193x: Fix frame polarity for DSP_A format
ASoC: codecs: ad193x: Add runtime support for DSP_A and I2S modes
ASoC: codecs: ad193x: Add support to disable on-chip PLL

  sound/soc/codecs/ad193x.c | 76 ++++++++++++++++++++++++++++++++++++---
  sound/soc/codecs/ad193x.h |  8 +++++
  2 files changed, 80 insertions(+), 4 deletions(-)