dt-bindings: panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Subsystems (5)
Jagan Teki
maintainerPATCH v7 1/2 dt-bindings: panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
Add dt-bingings for it.
---
Changes for v7, v6, v5, v4, v3:
- none
Changes for v2:
- new patch, derived from another dsi series
.../display/panel/feiyang,fy07024di26a30d.txt | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt new file +20 -0
@@ -0,0 +1,20 @@ +Feiyang FY07024DI26A30-D 7" MIPI-DSI LCD Panel + +Required properties: +- compatible: must be "feiyang,fy07024di26a30d" +- reg: DSI virtual channel used by that screen +- avdd-supply: analog regulator dc1 switch +- dvdd-supply: 3v3 digital regulator +- reset-gpios: a GPIO phandle for the reset pin + +Optional properties: +- backlight: phandle for the backlight control. + +panel@0 { + compatible = "feiyang,fy07024di26a30d"; + reg = <0>; + avdd-supply = <®_dc1sw>; + dvdd-supply = <®_dldo2>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; +};
Signature · 1 line
2.18.0.321.gffc6fa0e3
Jagan Teki
maintainerPATCH v7 2/2 drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
Add panel driver for it.
---
Changes for v7:
- rebase on master
- collect Merlijn Tested-by
- add tabs about drm timings
Changes for v6:
- add space b/w msleep and comment line
- use multi comment line style
- add sentinel
- collect Sam Ravnborg Reviewed-by
Changes for v5:
- drop drmP.h header
- order include files
- add empty line after kzalloc()
- drop gpio set for reset
- drop backlight put_device from probe()
- drop backlight put_device from remove()
- collect Tested-by from Bhushan Shah
Changes for v4:
- rebase on master
- adjust the hporch values to satisfy the refresh Changes for v3:
- use simple structure for command init
- update proper comments on power, reset delay sequnce
- fix to use set_display_off in disable function
- move mode type to structure
- drop refres rate value, let drm compute Changes for v2:
- new patch, derived from another dsi series
MAINTAINERS | 6 + drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../drm/panel/panel-feiyang-fy07024di26a30d.c | 272 ++++++++++++++++++ 4 files changed, 288 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
MAINTAINERS +6 -0
@@ -4879,6 +4879,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc S: Maintained F: drivers/gpu/drm/tve200/ +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS +M: Jagan Teki <[email protected]> +S: Maintained +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt + DRM DRIVER FOR ILITEK ILI9225 PANELS M: David Lechner <[email protected]> S: Maintained
drivers/gpu/drm/panel/Kconfig +9 -0
@@ -38,6 +38,15 @@ config DRM_PANEL_SIMPLE that it can be automatically turned off when the panel goes into a low power state. +config DRM_PANEL_FEIYANG_FY07024DI26A30D + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y if you want to enable support for panels based on the + Feiyang FY07024DI26A30-D MIPI-DSI interface. + config DRM_PANEL_ILITEK_IL9322 tristate "Ilitek ILI9322 320x240 QVGA panels" depends on OF && SPI
drivers/gpu/drm/panel/Makefile +1 -0
@@ -2,6 +2,7 @@ obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c new file +272 -0
272 lines not on this page · raw message
Signature · 1 line
2.18.0.321.gffc6fa0e3
Jagan Teki
maintainerRe: [PATCH v7 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Hi Thierry and Sam,
Quoted 30 lines · Jagan Teki
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
Add panel driver for it.
Signed-off-by Jagan Teki <[email protected]>Reviewed-by Sam Ravnborg <[email protected]>Tested-by Bhushan Shah <[email protected]>Tested-by Merlijn Wajer <[email protected]>---
Changes for v7:
- rebase on master
- collect Merlijn Tested-by
- add tabs about drm timings
Changes for v6:
- add space b/w msleep and comment line
- use multi comment line style
- add sentinel
- collect Sam Ravnborg Reviewed-by
Changes for v5:
- dropdrmP.hheader
- order include files
- add empty line afterkzalloc()
- drop gpio set for reset
- drop backlightput_devicefromprobe()
- drop backlightput_devicefromremove()
- collect Tested-by from Bhushan Shah
Changes for v4:
- rebase on master
- adjust the hporch values to satisfy the refresh
Quoted 8 lines
Changes for v3:
- use simple structure for command init
- update proper comments on power, reset delay sequnce
- fix to useset_display_offin disable function
- move mode type to structure
- drop refres rate value, let drm compute Changes for v2:
- new patch, derived from another dsi series
Pleas let me know if you any further comments on this?
Re: [PATCH v7 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Hi Thierry
Quoted 1 line
Pleas let me know if you any further comments on this?
No further comments from my side, and I consider it ready to apply.
Sam
Jagan Teki
maintainerRe: [PATCH v7 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Hi Thierry,
Quoted 6 lines · Sam Ravnborg
Hi Thierry
Quoted 1 line
Pleas let me know if you any further comments on this?
No further comments from my side, and I consider it ready to apply.
Would you please pick this?
Jagan.
Jagan Teki
maintainerRe: [PATCH v7 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Hi,
Quoted 5 lines · Jagan Teki
Hi Thierry,
Quoted 1 line · Sam Ravnborg
Quoted 7 lines
Quoted 5 lines
Hi Thierry
Quoted 1 line
Pleas let me know if you any further comments on this?
No further comments from my side, and I consider it ready to apply.
Would you please pick this?
Gentle ping.
Jagan Teki
maintainerRe: [PATCH v7 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
Hi David or Daniel or Thierry,
Quoted 11 lines · Jagan Teki
Hi,
Quoted 7 lines · Jagan Teki
Hi Thierry,
Quoted 3 lines · Sam Ravnborg
Hi Thierry
Quoted 7 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
Pleas let me know if you any further comments on this?
No further comments from my side, and I consider it ready to apply.
Would you please pick this?
Gentle ping.
Would any one pick or comment about this? It has been in ML for weeks with couple of gentle pings and irc queries.
Jagan.
Thierry Reding
AppliedQuoted 12 lines · Jagan Teki
Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
Add dt-bingings for it.
Signed-off-by Jagan Teki <[email protected]>Reviewed-by Rob Herring <[email protected]>---
Changes for v7, v6, v5, v4, v3:
- none
Changes for v2:
- new patch, derived from another dsi series
Quoted 3 lines
.../display/panel/feiyang,fy07024di26a30d.txt | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
Applied, thanks.
Thierry
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel