ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
PATCH 1/1 ARM: dts: rmobile: Force 1-bit bus width on Gen2 QSPI
U-Boot currently uses Gen2 QSPI in 1-bit mode, enforce it until we can do better using the new SPI NOR framework.
Signed-off-by Marek Vasut <[email protected]>
Cc Nobuhiro Iwamatsu <[email protected]>
--- arch/arm/dts/r8a7790-lager-u-boot.dts | 7 +++++++ arch/arm/dts/r8a7790-stout-u-boot.dts | 7 +++++++ arch/arm/dts/r8a7791-koelsch-u-boot.dts | 7 +++++++ arch/arm/dts/r8a7791-porter-u-boot.dts | 7 +++++++ arch/arm/dts/r8a7793-gose-u-boot.dts | 7 +++++++ arch/arm/dts/r8a7794-alt-u-boot.dts | 7 +++++++ arch/arm/dts/r8a7794-silk-u-boot.dts | 7 +++++++ 7 files changed, 49 insertions(+)
arch/arm/dts/r8a7790-lager-u-boot.dts +7 -0
@@ -11,3 +11,10 @@ &scif0 { u-boot,dm-pre-reloc; }; + +&qspi { + flash at 0 { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +};
arch/arm/dts/r8a7790-stout-u-boot.dts +7 -0
@@ -11,3 +11,10 @@ &scifa0 { u-boot,dm-pre-reloc; }; + +&qspi { + flash at 0 { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +};
arch/arm/dts/r8a7791-koelsch-u-boot.dts +7 -0
@@ -11,3 +11,10 @@ &scif0 { u-boot,dm-pre-reloc; }; + +&qspi { + flash at 0 { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +};
arch/arm/dts/r8a7791-porter-u-boot.dts +7 -0
@@ -16,3 +16,10 @@ status = "okay"; clock-frequency = <400000>; }; + +&qspi { + flash at 0 { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +};
arch/arm/dts/r8a7793-gose-u-boot.dts +7 -0
@@ -11,3 +11,10 @@ &scif0 { u-boot,dm-pre-reloc; }; + +&qspi { + flash at 0 { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +};
arch/arm/dts/r8a7794-alt-u-boot.dts +7 -0
@@ -11,3 +11,10 @@ &scif2 { u-boot,dm-pre-reloc; }; + +&qspi { + flash at 0 { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +};
arch/arm/dts/r8a7794-silk-u-boot.dts +7 -0
@@ -11,3 +11,10 @@ &scif2 { u-boot,dm-pre-reloc; }; + +&qspi { + flash at 0 { + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + }; +};
Signature · 1 line
2.19.2