ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
Subsystems (2)
PATCH 1/1 ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
The mmc.txt didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controllers.
--- arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 - 1 file changed, 1 deletion(-)
arch/arm/boot/dts/rv1108-elgin-r1.dts +0 -1
@@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; no-sd; no-sdio; non-removable;
Signature · 1 line
2.11.0
Re: [PATCH] ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node【请注意,邮件由linux-rockchip-bounces+shawn.lin=rock-chips.com@lists.infradead.org代发】
Quoted 14 lines · Johan Jonker
The mmc.txt didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controllers.
Signed-off-by Johan Jonker <[email protected]>--- arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 - 1 file changed, 1 deletion(-)arch/arm/boot/dts/rv1108-elgin-r1.dts +0
-0
arch/arm/boot/dts/rv1108-elgin-r1.dts line 40
Quoted 4 lines
arch/arm/boot/dts/rv1108-elgin-r1.dts +0
-1@@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp;
Quoted 4 lines
arch/arm/boot/dts/rv1108-elgin-r1.dts +0
-0no-sd; no-sdio; non-removable;
PATCH v2 1/1 ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
In reply to Johan JonkerThe mmc.txt didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controllers.
--- arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 - 1 file changed, 1 deletion(-)
arch/arm/boot/dts/rv1108-elgin-r1.dts +0 -1
@@ -37,7 +37,6 @@ &emmc { bus-width = <8>; cap-mmc-highspeed; - disable-wp; no-sd; no-sdio; non-removable;
Signature · 1 line
2.11.0
Heiko Stuebner
maintainerAm Sonntag, 10. März 2019, 16:19:28 CET schrieb Johan Jonker:
Quoted 6 lines
The mmc.txt didn't explicitly say disable-wp is for SD card slot only, but that is what it was designed for in the first place. Remove all disable-wp from emmc or sdio controllers.
Signed-off-by Johan Jonker <[email protected]>Reviewed-by Shawn Lin <[email protected]>
applied for 5.2
Thanks
Heiko