Skip to contentSkip to conversation

net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G

PATCH In review Maxime Chevallier 2 participants 2 messages Feb 21, 2019 – Feb 23, 2019

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G

Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters.

Fixes 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")

---

Dave,

This patch will conflict when merging net into net-next, and is actually not needed there. In net-next, this issue is fixed by the recent work done by Andrew and Heiner, that introduce more generic ways to handle aneg configuration for C45 PHYs.

The commit fixing this would be :
3de97f3c6308 ("net: phy: marvell10g: use genphy_c45_an_config_aneg")

However this fix should be backported, hence why it was implemented in a small standalone patch here.

Please tell me if you have any issue with this.

Thanks,

Maxime

 drivers/net/phy/marvell10g.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/net/phy/marvell10g.c +5 -1
index 82ab6ed3b74e..6bac602094bd 100644
@@ -26,6 +26,8 @@
 #include <linux/marvell_phy.h>
 #include <linux/phy.h>
 
+#define MDIO_AN_10GBT_CTRL_ADV_NBT_MASK	0x01e0
+
 enum {
 	MV_PCS_BASE_T		= 0x0000,
 	MV_PCS_BASE_R		= 0x1000,
@@ -386,8 +388,10 @@ static int mv3310_config_aneg(struct phy_device *phydev)
 	else
 		reg = 0;
 
+	/* Make sure we clear unsupported 2.5G/5G advertising */
 	ret = mv3310_modify(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-			    MDIO_AN_10GBT_CTRL_ADV10G, reg);
+			    MDIO_AN_10GBT_CTRL_ADV10G |
+			    MDIO_AN_10GBT_CTRL_ADV_NBT_MASK, reg);
 	if (ret < 0)
 		return ret;
 	if (ret > 0)
Signature · 1 line
2.19.2
maintainer
#1 lore raw

From: Maxime Chevallier <[email protected]>
Date: Thu, 21 Feb 2019 17:54:11 +0100

Quoted 17 lines

Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters.

Fixes 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")

---

Dave,

This patch will conflict when merging net into net-next, and is actually not needed there. In net-next, this issue is fixed by the recent work done by Andrew and Heiner, that introduce more generic ways to handle aneg configuration for C45 PHYs.

Quoted 7 lines

The commit fixing this would be :
3de97f3c6308 ("net: phy: marvell10g: use genphy_c45_an_config_aneg")

However this fix should be backported, hence why it was implemented in a small standalone patch here.

Please tell me if you have any issue with this.

Understood, this is fine.

Applied and queued up for -stable.

Thanks.