arm: exynos: arndale: Replace Chander Kashyap inactive maintainer
PATCH 1/4 arm: exynos: arndale: Replace Chander Kashyap inactive maintainer
Last activity from Arndale (Exynos5250) board maintainer Chander Kashyap was in January 2014 (Signed-off). Recently his samsung.com email bounces with 550 (5.1.1 Recipient address rejected: User unknown).
Add Krzysztof Kozlowski as odd fixer for this board.
---
Although I do not have this particular board, but still I can try to take care about odd fixes. Instead I have few other boards based on Exynos4412 (Odroids) and 542x (Arndale Octa, Odroids). I also run automated Linux kernel boot tests for my boards and I maintain the Samsung SoCs in Linux kernel.
--- board/samsung/arndale/MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
board/samsung/arndale/MAINTAINERS +2 -2
@@ -1,6 +1,6 @@ ARNDALE BOARD -M: Chander Kashyap <[email protected]> -S: Maintained +M: Krzysztof Kozlowski <[email protected]> +S: Odd Fixes F: board/samsung/arndale/ F: include/configs/arndale.h F: configs/arndale_defconfig
Signature · 1 line
2.17.1
PATCH 2/4 configs: odroid_xu3: Use consistent syntax for #include
When including other header from configs, use consistent <> syntax.
--- include/configs/odroid_xu3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/odroid_xu3.h +1 -1
@@ -7,7 +7,7 @@#ifndef __CONFIG_ODROID_XU3_H#define __CONFIG_ODROID_XU3_H -#include "exynos5420-common.h" +#include <configs/exynos5420-common.h> #include <configs/exynos5-common.h> #define CONFIG_BOARD_COMMON
Signature · 1 line
2.17.1
PATCH 2/4 configs: odroid_xu3: Use consistent syntax for #include
Quoted 12 lines · On Fri, 22 Feb 2019 19:36:41 +0100 Krzysztof Kozlowski <[email protected]> wrote:
When including other header from configs, use consistent <> syntax.
Signed-off-by Krzysztof Kozlowski <[email protected]>--- include/configs/odroid_xu3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)(quoted diff) +0
-0
b/include/configs/odroid_xu3.hindexf178549a7223..7f4cff186151100644
include/configs/odroid_xu3.h line 13
Quoted 8 lines
include/configs/odroid_xu3.h +1
-1@@ -7,7 +7,7 @@#ifndef __CONFIG_ODROID_XU3_H#define __CONFIG_ODROID_XU3_H -#include "exynos5420-common.h" +#include <configs/exynos5420-common.h> #include <configs/exynos5-common.h> #define CONFIG_BOARD_COMMON
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190224/b2c25ec0/attachment.sig>
PATCH 2/4 configs: odroid_xu3: Use consistent syntax for #include
In reply to Krzysztof KozlowskiQuoted 13 lines · Krzysztof Kozlowski
When including other header from configs, use consistent <> syntax.
Signed-off-by Krzysztof Kozlowski <[email protected]>--- include/configs/odroid_xu3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/odroid_xu3.h +0
-0
include/configs/odroid_xu3.h line 13
Quoted 8 lines
include/configs/odroid_xu3.h +1
-1@@ -7,7 +7,7 @@#ifndef __CONFIG_ODROID_XU3_H#define __CONFIG_ODROID_XU3_H -#include "exynos5420-common.h" +#include <configs/exynos5420-common.h> #include <configs/exynos5-common.h> #define CONFIG_BOARD_COMMON
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
PATCH 3/4 configs: odroid_xu3: Unify indentation
In reply to Krzysztof KozlowskiFile mixed space and tab indentation. Unify it.
--- include/configs/odroid_xu3.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
include/configs/odroid_xu3.h +5 -5
@@ -18,7 +18,7 @@#define TZPC_BASE_OFFSET 0x10000 -#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */ +#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */ /* Reserve the last 22 MiB for the secure firmware */ #define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
@@ -28,7 +28,7 @@#define CONFIG_ENV_SIZE (SZ_1K * 16)#define CONFIG_ENV_OFFSET (SZ_1K * 3136)/* ~3 MiB offset */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
@@ -38,7 +38,7 @@/* DFU */ #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M#define DFU_DEFAULT_POLL_TIMEOUT 300 -#define DFU_MANIFEST_POLL_TIMEOUT 25000 +#define DFU_MANIFEST_POLL_TIMEOUT 25000/* THOR */ #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM
@@ -85,11 +85,11 @@#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ -#define CONFIG_ODROID_REV_AIN 9 +#define CONFIG_ODROID_REV_AIN 9#define CONFIG_REVISION_TAG #undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "odroid" +#define CONFIG_SYS_BOARD "odroid"/* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS
Signature · 1 line
2.17.1
PATCH 3/4 configs: odroid_xu3: Unify indentation
Quoted 42 lines · On Fri, 22 Feb 2019 19:36:42 +0100 Krzysztof Kozlowski <[email protected]> wrote:
File mixed space and tab indentation. Unify it.
Signed-off-by Krzysztof Kozlowski <[email protected]>--- include/configs/odroid_xu3.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)(quoted diff) +0
-0
b/include/configs/odroid_xu3.hindex7f4cff186151..5e765a2b2b02100644include/configs/odroid_xu3.h +0
-1@@ -18,7 +18,7 @@#define TZPC_BASE_OFFSET 0x10000 -#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */ +#define
SDRAM_BANK_SIZE(256UL <<
20UL) /* 256 MB */ /* Reserve the last 22 MiB for the secure
firmware */ #defineCONFIG_SYS_MEM_TOP_HIDE(22UL <<
20UL) #defineCONFIG_TZSW_RESERVED_DRAM_SIZECONFIG_SYS_MEM_TOP_HIDE@@ -28,7 +28,7 @@
#defineCONFIG_ENV_SIZE(SZ_1K* 16)
#defineCONFIG_ENV_OFFSET(SZ_1K* 3136) /* ~3 MiB
offset */
-#defineCONFIG_SYS_INIT_SP_ADDR(CONFIG_SYS_LOAD_ADDR-0x1000000) +#defineCONFIG_SYS_INIT_SP_ADDR
(CONFIG_SYS_LOAD_ADDR-0x1000000)
#defineCONFIG_DEFAULT_CONSOLE"console=ttySAC2,115200n8\0"include/configs/odroid_xu3.h +1
-1@@ -38,7 +38,7 @@/* DFU */ #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M#define DFU_DEFAULT_POLL_TIMEOUT 300 -#define DFU_MANIFEST_POLL_TIMEOUT 25000 +#define DFU_MANIFEST_POLL_TIMEOUT 25000/* THOR */ #define CONFIG_G_DNL_THOR_VENDOR_NUM
CONFIG_USB_GADGET_VENDOR_NUM@@ -85,11 +85,11 @@
#defineCONFIG_SET_DFU_ALT_BUF_LEN(SZ_1K)/* Set
soc_rev,soc_id,board_rev, boardname, fdtfile */
include/configs/odroid_xu3.h line 95
Quoted 10 lines
include/configs/odroid_xu3.h +2
-2-#define CONFIG_ODROID_REV_AIN 9 +#define CONFIG_ODROID_REV_AIN 9#define CONFIG_REVISION_TAG #undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "odroid" +#define CONFIG_SYS_BOARD "odroid"/* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190224/9ec38892/attachment.sig>
PATCH 3/4 configs: odroid_xu3: Unify indentation
In reply to Krzysztof KozlowskiQuoted 43 lines · Krzysztof Kozlowski
File mixed space and tab indentation. Unify it.
Signed-off-by Krzysztof Kozlowski <[email protected]>--- include/configs/odroid_xu3.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)include/configs/odroid_xu3.h +3
-3@@ -18,7 +18,7 @@#define TZPC_BASE_OFFSET 0x10000 -#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */ +#define SDRAM_BANK_SIZE (256UL << 20UL)/* 256 MB */ /* Reserve the last 22 MiB for the secure firmware */ #define CONFIG_SYS_MEM_TOP_HIDE (22UL << 20UL)#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE@@ -28,7 +28,7 @@#define CONFIG_ENV_SIZE (SZ_1K * 16)#define CONFIG_ENV_OFFSET (SZ_1K * 3136)/* ~3 MiB offset */ -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"@@ -38,7 +38,7 @@/* DFU */ #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_32M#define DFU_DEFAULT_POLL_TIMEOUT 300 -#define DFU_MANIFEST_POLL_TIMEOUT 25000 +#define DFU_MANIFEST_POLL_TIMEOUT 25000/* THOR */ #define CONFIG_G_DNL_THOR_VENDOR_NUM CONFIG_USB_GADGET_VENDOR_NUM@@ -85,11 +85,11 @@#define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
include/configs/odroid_xu3.h line 95
Quoted 10 lines
include/configs/odroid_xu3.h +2
-2-#define CONFIG_ODROID_REV_AIN 9 +#define CONFIG_ODROID_REV_AIN 9#define CONFIG_REVISION_TAG #undef CONFIG_SYS_BOARD -#define CONFIG_SYS_BOARD "odroid" +#define CONFIG_SYS_BOARD "odroid"/* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
PATCH 4/4 arm: exynos: Remove duplicated "boardname" env setting
In reply to Krzysztof KozlowskiVarious places in the code set "boardname" env property. It was used for booting from ITB images and choosing proper DTB file name. Instead of duplicating it, use existing U-Boot wide - "board_name".
---
Tested only on Odroid XU3.
Tests on other boards appreciated.
--- board/samsung/common/bootscripts/autoboot.cmd | 10 +++++----- board/samsung/common/misc.c | 2 +- include/configs/odroid.h | 2 +- include/configs/odroid_xu3.h | 8 ++++++-- 4 files changed, 13 insertions(+), 9 deletions(-)
board/samsung/common/bootscripts/autoboot.cmd +5 -5
@@ -3,7 +3,7 @@ # ./tools/mkimage -c none -A arm -T script -d autoboot.cmd boot.scr # # It requires a list of environment variables to be defined before load: -# platform dependent: boardname, fdtfile, console +# platform dependent: board_name, fdtfile, console # system dependent: mmcbootdev, mmcbootpart, mmcrootdev, mmcrootpart, rootfstype # setenv fdtaddr "40800000"
@@ -35,17 +35,17 @@ else setenv initrd_addr -; fi;" -#### Routine: boot_fit - check that env $boardname is set and boot proper config of ITB image +#### Routine: boot_fit - check that env $board_name is set and boot proper config of ITB image setenv setboot_fit " -if test -e '${boardname}'; then +if test -e '${board_name}'; then setenv fdt_addr ; setenv initrd_addr ; setenv kerneladdr 0x42000000; setenv kernelname Image.itb; - setenv itbcfg "\"#${boardname}\""; + setenv itbcfg "\"#${board_name}\""; setenv imgbootcmd bootm; else - echo Warning! Variable: \$boardname is undefined!; + echo Warning! Variable: \$board_name is undefined!; fi" #### Routine: setboot_uimg - prepare env to boot uImage
board/samsung/common/misc.c +1 -1
@@ -101,7 +101,7 @@ void set_board_info(void) bdtype ="" ;sprintf (info,"%s%s" , bdname, bdtype); -env_set ("boardname" , info); +env_set ("board_name" , info);#endif snprintf (info,ARRAY_SIZE (info),"%s%x-%s%s.dtb" ,CONFIG_SYS_SOC , s5p_cpu_id, bdname, bdtype);
include/configs/odroid.h +1 -1
@@ -132,7 +132,7 @@"setenv kernelname Image.itb;" \"run loadkernel;" \"run kernel_args;" \ -"bootm ${kernel_addr_r}#${boardname}\0" \ +"bootm ${kernel_addr_r}#${board_name}\0" \"boot_uimg=" \"setenv kernelname uImage;" \"run check_dtb;" \
include/configs/odroid_xu3.h +6 -2
@@ -84,10 +84,14 @@#define CONFIG_SET_DFU_ALT_INFO #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) -/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ +/* Set soc_rev, soc_id, board_rev, board_name, fdtfile */ #define CONFIG_ODROID_REV_AIN 9#define CONFIG_REVISION_TAG +/* +* Need to override existing one (smdk5420) with odroid so set_board_info will +* use proper prefix when creating full board_name (SYS_BOARD + type) +*/ #undef CONFIG_SYS_BOARD#define CONFIG_SYS_BOARD "odroid"
@@ -101,7 +105,7 @@"rootfstype=ext4\0" \"console=" CONFIG_DEFAULT_CONSOLE \"fdtfile=exynos5422-odroidxu3.dtb\0" \ -"boardname=odroidxu3\0" \ +"board_name=odroidxu3\0" \"mmcbootdev=0\0" \"mmcrootdev=0\0" \"mmcbootpart=1\0" \
Signature · 1 line
2.17.1
PATCH 4/4 arm: exynos: Remove duplicated "boardname" env setting
Quoted 100 lines · On Fri, 22 Feb 2019 19:36:43 +0100 Krzysztof Kozlowski <[email protected]> wrote:
Various places in the code set "boardname" env property. It was used for booting from ITB images and choosing proper DTB file name. Instead of duplicating it, use existing U-Boot wide - "
board_name".Signed-off-by Krzysztof Kozlowski <[email protected]>---
Tested only on Odroid XU3.
Tests on other boards appreciated.--- board/samsung/common/bootscripts/autoboot.cmd | 10 +++++----- board/samsung/common/misc.c | 2 +- include/configs/odroid.h | 2 +- include/configs/odroid_xu3.h | 8 ++++++-- 4 files changed, 13 insertions(+), 9 deletions(-)(quoted diff) +0
-0b/board/samsung/common/bootscripts/autoboot.cmd index
11c724c4e095..d66bcccf5d1c100644 --- a/board/samsung/common/bootscripts/autoboot.cmd +++ b/board/samsung/common/bootscripts/autoboot.cmd @@ -3,7 +3,7 @@# ./tools/mkimage -c none -A arm -T script -d autoboot.cmd boot.scr # # It requires a list of environment variables to be defined before load: -# platform dependent: boardname, fdtfile, console +# platform dependent: board_name, fdtfile, console # system dependent: mmcbootdev, mmcbootpart, mmcrootdev, mmcrootpart, rootfstype # setenv fdtaddr "40800000"board/samsung/common/bootscripts/autoboot.cmd +0
-1@@ -35,17 +35,17 @@ else setenv initrd_addr -; fi;" -#### Routine: boot_fit - check that env $boardname is set and bootproper config of ITB image +#### Routine:
boot_fit- check that env $board_name is set and boot proper config of ITB image setenvsetboot_fit" -if test -e '${boardname}'; thenboard/samsung/common/bootscripts/autoboot.cmd +3
-2+if test -e '${board_name}'; then setenv fdt_addr ; setenv initrd_addr ; setenv kerneladdr 0x42000000; setenv kernelname Image.itb; - setenv itbcfg "\"#${boardname}\""; + setenv itbcfg "\"#${board_name}\""; setenv imgbootcmd bootm; else - echo Warning! Variable: \$boardname is undefined!; + echo Warning! Variable: \$board_name is undefined!; fi" #### Routine: setboot_uimg - prepare env to boot uImageboard/samsung/common/misc.c +1
-1@@ -101,7 +101,7 @@ void set_board_info(void) bdtype ="" ;sprintf (info,"%s%s" , bdname, bdtype); -env_set ("boardname" , info); +env_set ("board_name" , info);#endif snprintf (info,ARRAY_SIZE (info),"%s%x-%s%s.dtb" ,CONFIG_SYS_SOC , s5p_cpu_id, bdname, bdtype);include/configs/odroid.h +1
-1@@ -132,7 +132,7 @@"setenv kernelname Image.itb;" \"run loadkernel;" \"run kernel_args;" \ -"bootm ${kernel_addr_r}#${boardname}\0" \ +"bootm ${kernel_addr_r}#${board_name}\0" \"boot_uimg=" \"setenv kernelname uImage;" \"run check_dtb;" \(quoted diff) +0
-0
b/include/configs/odroid_xu3.hindex5e765a2b2b02..af6004eaf511100644include/configs/odroid_xu3.h +3
-1@@ -84,10 +84,14 @@#define CONFIG_SET_DFU_ALT_INFO #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) -/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ +/* Set soc_rev, soc_id, board_rev, board_name, fdtfile */ #define CONFIG_ODROID_REV_AIN 9#define CONFIG_REVISION_TAG +/* +* Need to override existing one (smdk5420) with odroid so
set_board_infowill
+ * use proper prefix when creating fullboard_name(SYS_BOARD+ type)
+ */
#undefCONFIG_SYS_BOARD
#defineCONFIG_SYS_BOARD"odroid"
include/configs/odroid_xu3.h line 111
Quoted 8 lines
include/configs/odroid_xu3.h +1
-1@@ -101,7 +105,7 @@"rootfstype=ext4\0" \"console=" CONFIG_DEFAULT_CONSOLE \"fdtfile=exynos5422-odroidxu3.dtb\0" \ -"boardname=odroidxu3\0" \ +"board_name=odroidxu3\0" \"mmcbootdev=0\0" \"mmcrootdev=0\0" \"mmcbootpart=1\0" \
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190224/9f02deed/attachment.sig>
PATCH 4/4 arm: exynos: Remove duplicated "boardname" env setting
In reply to Krzysztof KozlowskiQuoted 100 lines · Krzysztof Kozlowski
Various places in the code set "boardname" env property. It was used for booting from ITB images and choosing proper DTB file name. Instead of duplicating it, use existing U-Boot wide - "
board_name".Signed-off-by Krzysztof Kozlowski <[email protected]>---
Tested only on Odroid XU3.
Tests on other boards appreciated.--- board/samsung/common/bootscripts/autoboot.cmd | 10 +++++----- board/samsung/common/misc.c | 2 +- include/configs/odroid.h | 2 +- include/configs/odroid_xu3.h | 8 ++++++-- 4 files changed, 13 insertions(+), 9 deletions(-)board/samsung/common/bootscripts/autoboot.cmd +5
-5@@ -3,7 +3,7 @@ # ./tools/mkimage -c none -A arm -T script -d autoboot.cmd boot.scr # # It requires a list of environment variables to be defined before load: -# platform dependent: boardname, fdtfile, console +# platform dependent: board_name, fdtfile, console # system dependent: mmcbootdev, mmcbootpart, mmcrootdev, mmcrootpart, rootfstype # setenv fdtaddr "40800000"@@ -35,17 +35,17 @@ else setenv initrd_addr -; fi;" -#### Routine: boot_fit - check that env $boardname is set and boot proper config of ITB image +#### Routine: boot_fit - check that env $board_name is set and boot proper config of ITB image setenv setboot_fit " -if test -e '${boardname}'; then +if test -e '${board_name}'; then setenv fdt_addr ; setenv initrd_addr ; setenv kerneladdr 0x42000000; setenv kernelname Image.itb; - setenv itbcfg "\"#${boardname}\""; + setenv itbcfg "\"#${board_name}\""; setenv imgbootcmd bootm; else - echo Warning! Variable: \$boardname is undefined!; + echo Warning! Variable: \$board_name is undefined!; fi" #### Routine: setboot_uimg - prepare env to boot uImageboard/samsung/common/misc.c +1
-1@@ -101,7 +101,7 @@ void set_board_info(void) bdtype ="" ;sprintf (info,"%s%s" , bdname, bdtype); -env_set ("boardname" , info); +env_set ("board_name" , info);#endif snprintf (info,ARRAY_SIZE (info),"%s%x-%s%s.dtb" ,CONFIG_SYS_SOC , s5p_cpu_id, bdname, bdtype);include/configs/odroid.h +1
-1@@ -132,7 +132,7 @@"setenv kernelname Image.itb;" \"run loadkernel;" \"run kernel_args;" \ -"bootm ${kernel_addr_r}#${boardname}\0" \ +"bootm ${kernel_addr_r}#${board_name}\0" \"boot_uimg=" \"setenv kernelname uImage;" \"run check_dtb;" \include/configs/odroid_xu3.h +5
-1@@ -84,10 +84,14 @@#define CONFIG_SET_DFU_ALT_INFO #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) -/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ +/* Set soc_rev, soc_id, board_rev, board_name, fdtfile */ #define CONFIG_ODROID_REV_AIN 9#define CONFIG_REVISION_TAG +/* +* Need to override existing one (smdk5420) with odroid so set_board_info will +* use proper prefix when creating full board_name (SYS_BOARD + type) +*/ #undef CONFIG_SYS_BOARD#define CONFIG_SYS_BOARD "odroid"
include/configs/odroid_xu3.h line 111
Quoted 8 lines
include/configs/odroid_xu3.h +1
-1@@ -101,7 +105,7 @@"rootfstype=ext4\0" \"console=" CONFIG_DEFAULT_CONSOLE \"fdtfile=exynos5422-odroidxu3.dtb\0" \ -"boardname=odroidxu3\0" \ +"board_name=odroidxu3\0" \"mmcbootdev=0\0" \"mmcrootdev=0\0" \"mmcbootpart=1\0" \
applied to u-boot-samsung.
Thanks,
Minkyu Kang.
PATCH 1/4 arm: exynos: arndale: Replace Chander Kashyap inactive maintainer
In reply to Krzysztof KozlowskiQuoted 25 lines · On Fri, 22 Feb 2019 19:36:40 +0100 Krzysztof Kozlowski <[email protected]> wrote:
Last activity from Arndale (Exynos5250) board maintainer Chander Kashyap was in January 2014 (Signed-off). Recently his samsung.com email bounces with 550 (5.1.1 Recipient address rejected: User unknown).
Add Krzysztof Kozlowski as odd fixer for this board.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Although I do not have this particular board, but still I can try to take care about odd fixes. Instead I have few other boards based on Exynos4412 (Odroids) and 542x (Arndale Octa, Odroids). I also run automated Linux kernel boot tests for my boards and I maintain the Samsung SoCs in Linux kernel.
--- board/samsung/arndale/MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)(quoted diff) +0
-0b/board/samsung/arndale/MAINTAINERS index
7dc17854d1b3..98ccaa42a86e100644 --- a/board/samsung/arndale/MAINTAINERS
+++ b/board/samsung/arndale/MAINTAINERS
board/samsung/arndale/MAINTAINERS line 6
Quoted 8 lines
board/samsung/arndale/MAINTAINERS +2
-2@@ -1,6 +1,6 @@ ARNDALE BOARD -M: Chander Kashyap <[email protected]> -S: Maintained +M: Krzysztof Kozlowski <[email protected]> +S: Odd Fixes F: board/samsung/arndale/ F: include/configs/arndale.h F: configs/arndale_defconfig
(Fully) Acked-by: Lukasz Majewski <[email protected]>
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190222/c91c78e0/attachment.sig>
PATCH 1/4 arm: exynos: arndale: Replace Chander Kashyap inactive maintainer
In reply to Krzysztof KozlowskiQuoted 25 lines · Krzysztof Kozlowski
Last activity from Arndale (Exynos5250) board maintainer Chander Kashyap was in January 2014 (Signed-off). Recently his samsung.com email bounces with 550 (5.1.1 Recipient address rejected: User unknown).
Add Krzysztof Kozlowski as odd fixer for this board.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Although I do not have this particular board, but still I can try to take care about odd fixes. Instead I have few other boards based on Exynos4412 (Odroids) and 542x (Arndale Octa, Odroids). I also run automated Linux kernel boot tests for my boards and I maintain the Samsung SoCs in Linux kernel.
--- board/samsung/arndale/MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)board/samsung/arndale/MAINTAINERS +0
-0
board/samsung/arndale/MAINTAINERS line 6
Quoted 8 lines
board/samsung/arndale/MAINTAINERS +2
-2@@ -1,6 +1,6 @@ ARNDALE BOARD -M: Chander Kashyap <[email protected]> -S: Maintained +M: Krzysztof Kozlowski <[email protected]> +S: Odd Fixes F: board/samsung/arndale/ F: include/configs/arndale.h F: configs/arndale_defconfig
applied to u-boot-samsung.
Thanks,
Minkyu Kang.