Skip to contentSkip to conversation

glibc: Install AArch64 loader link correctly for usrmerge+multilib

PATCH In review Mike Crowe 1 participant 2 messages Feb 24, 2019

lore
Share & tools
lore

Mike Crowe

author
#0 lore raw

PATCH 1/1 glibc: Install AArch64 loader link correctly for usrmerge+multilib

The AArch64 little-endian ABI requires that the dynamic loader is always available at /lib/ld-linux-aarch64.so.1. Similarly, the big-endian ABI requires that the dynamic loader is always available at /lib/ld-linux-aarch64_be.so.1.

glibc-package.inc contains code that tries to ensure this, but unfortunately it is defeated by the combination of multilib and usrmerge because it does not take into account that /lib is the same as /usr/lib with usrmerge when it adds the loader path to libc_baselibs and when it attempts to show that /usr/lib is empty in do_poststash_install_cleanup. This results in the symlink not being included in the package and a build failure due to rmdir failing.

Richard Purdie also suggested[1] that ${nonarch_base_libdir} should not be used as a synonym for /lib in this case.

This hopefully-fixed version always sets ARCH_DYNAMIC_LOADER and then uses ${root_prefix}/lib/${ARCH_DYNAMIC_LOADER} to refer to the dynamic loader which works with both multilib and usrmerge. Since ARCH_DYNAMIC_LOADER is only non-empty if the symlink is required, the code to create it can move to do_install_append. Then do_poststash_install_cleanup needs to be taught that ${exec_prefix}/lib may not be empty if the dynamic loader symlink is there.

It appears not to be possible to specify the name of the loader via a variable with an override, since the _aarch64 override is applied even for _aarch64-be, so I've set the loader name using ${TARGET_ARCH} instead.

Build-tested and inspected core-image-minimal rootfs with:

* AArch64 no multilib (real loader in correct place) MACHINE = "qemuarm64"

* AArch64 multilib (symlink in correct place) MACHINE = "qemuarm64"
MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "armv7at-neon" require conf/multilib.conf

* AArch64 usrmerge (real loader in correct place)
DISTRO_FEATURES += "usrmerge"
MACHINE = "qemuarm64"

* AArch64 multilib usrmerge (symlink in correct place) DISTRO_FEATURES += "usrmerge"
MACHINE = "qemuarm64"
MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "armv7at-neon" require conf/multilib.conf

* big-endian versions of all of the above by also setting DEFAULTTUNE = "aarch64_be".
(building glibc only.)

* x86_64 (real loader in /lib as before)[2]
MACHINE = "qemux86"

* x86_64 multilib (real loader in /lib64 as before) MACHINE="qemux86-64"
MULTILIBS = "multilib:lib32" DEFAULTTUNE_virtclass-multilib-lib32 = "x86" require conf/multilib.conf

I also tested leaving an unwanted file in ${exec_prefix}/lib for do_poststash_install_cleanup to detect, and I believe the detection always worked correctly.

[1] http://lists.openembedded.org/pipermail/openembedded-core/2018-November/276120.html

---
 meta/recipes-core/glibc/glibc-package.inc | 34 ++++++++++++++---------
 1 file changed, 21 insertions(+), 13 deletions(-)
meta/recipes-core/glibc/glibc-package.inc +21 -13
index 329732f48c..b9259612d4 100644
@@ -15,7 +15,12 @@ RPROVIDES_glibc-thread-db = "eglibc-thread-db"
 RPROVIDES_${PN}-pcprofile = "eglibc-pcprofile"
 RPROVIDES_${PN}-dbg = "eglibc-dbg"
 libc_baselibs = "${base_libdir}/libc.so.* ${base_libdir}/libc-*.so ${base_libdir}/libm*.so.* ${base_libdir}/libm-*.so ${base_libdir}/libmvec-*.so ${base_libdir}/ld*.so.* ${base_libdir}/ld-*.so ${base_libdir}/libpthread*.so.* ${base_libdir}/libpthread-*.so ${base_libdir}/libresolv*.so.* ${base_libdir}/libresolv-*.so ${base_libdir}/librt*.so.* ${base_libdir}/librt-*.so ${base_libdir}/libutil*.so.* ${base_libdir}/libutil-*.so ${base_libdir}/libnsl*.so.* ${base_libdir}/libnsl-*.so ${base_libdir}/libnss_files*.so.* ${base_libdir}/libnss_files-*.so ${base_libdir}/libnss_compat*.so.* ${base_libdir}/libnss_compat-*.so ${base_libdir}/libnss_dns*.so.* ${base_libdir}/libnss_dns-*.so ${base_libdir}/libdl*.so.* ${base_libdir}/libdl-*.so ${base_libdir}/libanl*.so.* ${base_libdir}/libanl-*.so ${base_libdir}/libBrokenLocale*.so.* ${base_libdir}/libBrokenLocale-*.so"
-libc_baselibs_append_aarch64 = " /lib/ld-linux-aarch64*.so.1"
+ARCH_DYNAMIC_LOADER = ""
+# The aarch64 ABI says the dynamic linker -must- be
+# /lib/ld-linux-aarch64{,_be}.so.1. With usrmerge, that may mean that
+# we need to install it in /usr/lib.
+ARCH_DYNAMIC_LOADER_aarch64 = "ld-linux-${TARGET_ARCH}.so.1"
+libc_baselibs_append = " ${@oe.utils.conditional('ARCH_DYNAMIC_LOADER', '', '', '${root_prefix}/lib/${ARCH_DYNAMIC_LOADER}', d)}"
 INSANE_SKIP_${PN}_append_aarch64 = " libdir"
 
 FILES_${PN} = "${libc_baselibs} ${libexecdir}/* ${base_sbindir}/ldconfig ${sysconfdir}/ld.so.conf"
@@ -114,20 +119,20 @@ do_install_append () {
 		echo "d root root 0755 /var/run/nscd none" \
 			> ${D}${sysconfdir}/default/volatiles/98_nscd
 	fi
+
+	# The dynamic loader will have been installed into
+	# ${base_libdir}. However, if that isn't going to end up being
+	# available in the ABI-mandated location, then a symlink must
+        # be created.
+
+	if [ -n "${ARCH_DYNAMIC_LOADER}" -a ! -e "${D}${root_prefix}/lib/${ARCH_DYNAMIC_LOADER}" ]; then
+		install -d ${D}${root_prefix}/lib
+		ln -s ${@oe.path.relative('${root_prefix}/lib', '${base_libdir}')}/${ARCH_DYNAMIC_LOADER} \
+				${D}${root_prefix}/lib/${ARCH_DYNAMIC_LOADER}
+	fi
 }
 
 do_install_append_aarch64 () {
-	if [ "${base_libdir}" != "${nonarch_base_libdir}" ]; then
-		# The aarch64 ABI says the dynamic linker -must- be /lib/ld-linux-aarch64[_be].so.1
-		install -d ${D}${nonarch_base_libdir}
-		if [ -e ${D}${base_libdir}/ld-linux-aarch64.so.1 ]; then
-			ln -s ${@oe.path.relative('${nonarch_base_libdir}', '${base_libdir}')}/ld-linux-aarch64.so.1 \
-				${D}${nonarch_base_libdir}/ld-linux-aarch64.so.1
-		elif [ -e ${D}${base_libdir}/ld-linux-aarch64_be.so.1 ]; then
-			ln -s ${@oe.path.relative('${nonarch_base_libdir}', '${base_libdir}')}/ld-linux-aarch64_be.so.1 \
-				${D}${nonarch_base_libdir}/ld-linux-aarch64_be.so.1
-		fi
-	fi
 	do_install_armmultilib
 }
 
@@ -209,12 +214,15 @@ do_poststash_install_cleanup () {
 	rm -rf ${D}/${localedir}
 	rm -rf ${D}${datadir}/locale
 	if [ "${libdir}" != "${exec_prefix}/lib" ]; then
-		if [ -d ${D}${exec_prefix}/lib ]; then
+	    if [ -d "${D}${exec_prefix}/lib" ]; then
+		if [ -z "${ARCH_DYNAMIC_LOADER}" -o \
+		     ! -e "${D}${exec_prefix}/lib/${ARCH_DYNAMIC_LOADER}" ]; then
 			# error out if directory isn't empty
 			# this dir should only contain locale dir
 			# which has been deleted in the previous step
 			rmdir ${D}${exec_prefix}/lib
 		fi
+	    fi
 	fi
 }
 addtask do_poststash_install_cleanup after do_stash_locale do_install before do_populate_sysroot do_package
Signature · 1 line
2.20.1
author
#1 lore raw
Quoted 2 lines · Mike Crowe

* x86_64 (real loader in /lib as before)[2]
MACHINE = "qemux86"

This is not directly related to my patch, but according to
https://refspecs.linuxfoundation.org/elf/x86_64-abi-0.99.pdf §5.2.1 the definitive location for the x86_64 loader is /lib64/ld-linux-x86-64.so.2 not /lib/ld-linux-x86-64.so.2. Debian:amd64 appears to have a /lib64 directory purely so that provide a symlink to the loader from that location.

If this is true, then a similar symlink is required for x86_64 too, but unfortunately this one needs to be in /lib64 so my patch would require some tweaks to cope with that too.

Mike.