Skip to contentSkip to conversation

4.19.26-stable review

PATCH In review Greg Kroah-Hartman 5 participants 158 messages Feb 25, 2019 – Feb 26, 2019

Subsystems (6)
Stable branch MIPS GPIO Arm MediaTek +2 more subsystems
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 4.19.26-stable review

This is the start of the stable review cycle for the 4.19.26 release. There are 152 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Feb 27 19:49:57 UTC 2019. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.26-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.26-rc1

Nathan Chancellor <[email protected]>
pinctrl: max77620: Use define directive for max77620_pinconf_param values

Mikulas Patocka <[email protected]>
udlfb: handle unplug properly

Taehee Yoo <[email protected]>
netfilter: ipt_CLUSTERIP: fix sleep-in-atomic bug in clusterip_config_entry_put()

Fernando Fernandez Mancera <[email protected]>
netfilter: nfnetlink_osf: add missing fmatch check

Eli Cooper <[email protected]>
netfilter: ipv6: Don't preserve original oif for loopback address

Pablo Neira Ayuso <[email protected]>
netfilter: nft_compat: use-after-free when deleting targets

Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: fix flush after rule deletion in the same batch

Hangbin Liu <[email protected]>
Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"

Gao Xiang <[email protected]>
staging: erofs: unzip_vle_lz4.c,utils.c: rectify BUG_ONs

Gao Xiang <[email protected]>
staging: erofs: unzip_{pagevec.h,vle.c}: rectify BUG_ONs

Gao Xiang <[email protected]>
staging: erofs: {dir,inode,super}.c: rectify BUG_ONs

Gao Xiang <[email protected]>
staging: erofs: add a full barrier in erofs_workgroup_unfreeze

Gao Xiang <[email protected]>
staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'

Gao Xiang <[email protected]>
staging: erofs: atomic_cond_read_relaxed on ref-locked workgroup

Gao Xiang <[email protected]>
staging: erofs: remove the redundant d_rehash() for the root dentry

Gao Xiang <[email protected]>
staging: erofs: drop multiref support temporarily

Chen Gong <[email protected]>
staging: erofs: replace BUG_ON with DBG_BUGON in data.c

Gao Xiang <[email protected]>
staging: erofs: complete error handing of z_erofs_do_read_page

Gao Xiang <[email protected]>
staging: erofs: fix a bug when appling cache strategy

Willem de Bruijn <[email protected]>
net: avoid false positives in untrusted gso validation

Willem de Bruijn <[email protected]>
net: validate untrusted gso packets without csum offload

Yu Zhang <[email protected]>
kvm: x86: Return LA57 feature based on hardware capability

Felix Fietkau <[email protected]>
mac80211: allocate tailroom for forwarded mesh packets

Leo (Hanghong) Ma <[email protected]>
drm/amd/display: Fix MST reboot/poweroff sequence

Chris Wilson <[email protected]>
drm/i915/fbdev: Actually configure untiled displays

Rafael J. Wysocki <[email protected]>
gpu: drm: radeon: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime

Alex Deucher <[email protected]>
drm/amdgpu: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime

Alexey Brodkin <[email protected]>
ARC: define ARCH_SLAB_MINALIGN = 8

Eugeniy Paltsev <[email protected]>
ARC: U-boot: check arguments paranoidly

Eugeniy Paltsev <[email protected]>
ARCv2: Enable unaligned access in early ASM code

Dmitry V. Levin <[email protected]>
parisc: Fix ptrace syscall number modification

Eric Biggers <[email protected]>
KEYS: always initialize keyring_index_key::desc_len

Eric Biggers <[email protected]>
KEYS: user: Align the payload buffer

Bart Van Assche <[email protected]>
RDMA/srp: Rework SCSI device reset handling

Saeed Mahameed <[email protected]>
net/mlx5e: XDP, fix redirect resources availability check

Cong Wang <[email protected]>
net_sched: fix two more memory leaks in cls_tcindex

Cong Wang <[email protected]>
net_sched: fix a memory leak in cls_tcindex

Cong Wang <[email protected]>
net_sched: fix a race condition in tcindex_destroy()

Hangbin Liu <[email protected]>
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()

Hangbin Liu <[email protected]>
geneve: should not call rt6_lookup() when ipv6 was disabled

Johannes Berg <[email protected]>
net: socket: make bond ioctls go through compat_ifreq_ioctl()

Johannes Berg <[email protected]>
net: socket: fix SIOCGIFNAME in compat

Johannes Berg <[email protected]>
Revert "kill dev_ifsioc()"

Johannes Berg <[email protected]>
Revert "socket: fix struct ifreq size in compat ioctl"

Cong Wang <[email protected]>
team: avoid complex list operations in team_nl_cmd_options_set()

Xin Long <[email protected]>
sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate

Xin Long <[email protected]>
sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment

Russell King <[email protected]>
net: sfp: do not probe SFP module before we're attached

Kal Conley <[email protected]>
net/packet: fix 4gb buffer limit due to overflow check

Tonghao Zhang <[email protected]>
net/mlx5e: Don't overwrite pedit action when multiple pedit used

Saeed Mahameed <[email protected]>
net/mlx4_en: Force CHECKSUM_NONE for short ethernet frames

Arthur Kiyanovski <[email protected]>
net: ena: fix race between link up and device initalization

Li RongQing <[email protected]>
ipv6: propagate genlmsg_reply return code

Konstantin Khlebnikov <[email protected]>
inet_diag: fix reporting cgroup classid and fallback to priority

Eric Dumazet <[email protected]>
batman-adv: fix uninit-value in batadv_interface_tx()

Nathan Chancellor <[email protected]>
isdn: avm: Fix string plus integer warning from Clang

Tariq Toukan <[email protected]>
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor

Ido Schimmel <[email protected]>
selftests: forwarding: Add a test case for externally learned FDB entries

Ido Schimmel <[email protected]>
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky

Ido Schimmel <[email protected]>
net: bridge: Mark FDB entries that were added by user as such

Nir Dotan <[email protected]>
mlxsw: pci: Return error on PCI reset timeout

Madalin Bucur <[email protected]>
dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start

Peter Oskolkov <[email protected]>
bpf: bpf_setsockopt: reset sock dst on SO_MARK changes

Kangjie Lu <[email protected]>
leds: lp5523: fix a missing check of return value of lp55xx_read

Cheng-Min Ao <[email protected]>
hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table

Colin Ian King <[email protected]>
atm: he: fix sign-extension overflow on large shift

Stanislav Fomichev <[email protected]>
selftests/bpf: retry tests that expect build-id

Stanislav Fomichev <[email protected]>
bpf: zero out build_id for BPF_STACK_BUILD_ID_IP

Stanislav Fomichev <[email protected]>
bpf: don't assume build-id length is always 20 bytes

David Howells <[email protected]>
afs: Fix key refcounting in file locking code

Marc Dionne <[email protected]>

    afs: Don't set vnode->cb_s_break in afs_validate()

Davide Caratti <[email protected]>
selftests: tc-testing: fix parsing of ife type

Davide Caratti <[email protected]>
selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified

Davide Caratti <[email protected]>
selftests: tc-testing: drop test on missing tunnel key id

Wen Yang <[email protected]>
pvcalls-front: fix potential null dereference

Julia Lawall <[email protected]>
drm/sun4i: backend: add missing of_node_puts

Pavel Tikhomirov <[email protected]>
vhost: return EINVAL if iovecs size does not match the message size

Charlene Liu <[email protected]>
drm/amd/display: fix PME notification not working in RV desktop

Felix Kuehling <[email protected]>
drm/amdkfd: Don't assign dGPUs to APU topology devices

Julia Lawall <[email protected]>
drm/meson: add missing of_node_put

Talons Lee <[email protected]>
always clear the X2APIC_ENABLE bit for PV guest

Henry Yen <[email protected]>
netfilter: nft_flow_offload: fix checking method of conntrack helper

Varun Prakash <[email protected]>
scsi: cxgb4i: add wait_for_completion()

Avri Altman <[email protected]>
scsi: ufs: Fix geometry descriptor size

Manish Rangankar <[email protected]>
scsi: qedi: Add ep_state for login completion on un-reachable targets

Stanley Chu <[email protected]>
scsi: ufs: Fix system suspend status

Xiubo Li <[email protected]>
scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes

Jia-Ju Bai <[email protected]>
isdn: i4l: isdn_tty: Fix some concurrency double-free bugs

Jose Abreu <[email protected]>
net: stmmac: Prevent RX starvation in stmmac_napi_poll()

Jose Abreu <[email protected]>
net: stmmac: Fix the logic of checking if RX Watchdog must be enabled

Jose Abreu <[email protected]>
net: stmmac: Check if CBS is supported before configuring

Jose Abreu <[email protected]>
net: stmmac: dwxgmac2: Only clear interrupts that are active

Jose Abreu <[email protected]>
net: stmmac: Fix PCI module removal leak

Tony Luck <[email protected]>
acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()

Christophe Leroy <[email protected]>
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.

Leon Romanovsky <[email protected]>
RDMA/mthca: Clear QP objects during their allocation

wenxu <[email protected]>
netfilter: nft_flow_offload: fix interaction with vrf slave device

Song Liu <[email protected]>
bpf: fix panic in stack_map_get_build_id() on i386 and arm32

Wen Yang <[email protected]>
pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock

Yuchung Cheng <[email protected]>
bpf: correctly set initial window on active Fast Open sender

wenxu <[email protected]>
netfilter: nft_flow_offload: Fix reverse route lookup

Thomas Bogendoerfer <[email protected]>
MIPS: jazz: fix 64bit build

Michael S. Tsirkin <[email protected]>
include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR

Logan Gunthorpe <[email protected]>
scsi: isci: initialize shost fully before calling scsi_add_host()

YueHaibing <[email protected]>
scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param

Taehee Yoo <[email protected]>
netfilter: nf_tables: fix leaking object reference count

Ido Schimmel <[email protected]>
selftests: forwarding: Add a test for VLAN deletion

Nir Dotan <[email protected]>
mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition

Dan Carpenter <[email protected]>
xprtrdma: Double free in rpcrdma_sendctxs_create()

Alban Bedel <[email protected]>
MIPS: ath79: Enable OF serial ports in the default config

Stephen Warren <[email protected]>
net/mlx4: Get rid of page operation after dma_alloc_coherent

NeilBrown <[email protected]>
watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem

Andrey Ignatov <[email protected]>

    selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr

Andrey Ignatov <[email protected]>

    bpf: Fix [::] -> [::1] rewrite in sys_sendmsg

Yonglong Liu <[email protected]>
net: hns: Fix use after free identified by SLUB debug

Denis Bolotin <[email protected]>
qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier

Denis Bolotin <[email protected]>
qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count

YueHaibing <[email protected]>
xen/pvcalls: remove set but not used variable 'intf'

Kangjie Lu <[email protected]>
mfd: mc13xxx: Fix a missing check of a register-read failure

Keerthy <[email protected]>
mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()

Enric Balletbo i Serra <[email protected]>
mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove

Oskari Lemmela <[email protected]>

    mfd: axp20x: Add supported cells for AXP803

Chen-Yu Tsai <[email protected]>

    mfd: axp20x: Re-align MFD cell entries

Oskari Lemmela <[email protected]>

    mfd: axp20x: Add AC power supply cell for AXP813

Charles Keepax <[email protected]>
mfd: wm5110: Add missing ASRC rate register

Jonathan Marek <[email protected]>
mfd: qcom_rpm: write fw_version to CTRL_REG

Dien Pham <[email protected]>
mfd: bd9571mwv: Add volatile register to make DVFS work

Dan Carpenter <[email protected]>
mfd: ab8500-core: Return zero in get_register_interruptible()

Nicolas Boichat <[email protected]>
mfd: mt6397: Do not call irq_domain_remove if PMIC unsupported

Nathan Chancellor <[email protected]>
mfd: db8500-prcmu: Fix some section annotations

Nathan Chancellor <[email protected]>
mfd: twl-core: Fix section annotations on {,un}protect_pm_master

Stefano Stabellini <[email protected]>
pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read

Stefano Stabellini <[email protected]>
pvcalls-front: properly allocate sk

Stefano Stabellini <[email protected]>
pvcalls-front: don't try to free unallocated rings

Stefano Stabellini <[email protected]>
pvcalls-front: read all data before closing the connection

Vignesh R <[email protected]>
mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells

Heiko Stuebner <[email protected]>
backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables

Eric Biggers <[email protected]>
KEYS: allow reaching the keys quotas exactly

Hui Wang <[email protected]>
ALSA: hda/realtek: Disable PC beep in passthrough on alc285

Jeremy Soller <[email protected]>
ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5

Michal Hocko <[email protected]>
proc, oom: do not report alien mms when setting oom_score_adj

Ralph Campbell <[email protected]>
numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES

Yan, Zheng <[email protected]>

    ceph: avoid repeatedly adding inode to mdsc->snap_flush_list

Ilya Dryomov <[email protected]>
libceph: handle an empty authorize reply

Herbert Xu <[email protected]>
mac80211: Free mpath object when rhashtable insertion fails

Herbert Xu <[email protected]>
mac80211: Use linked list instead of rhashtable walk for mesh tables

Rakesh Pillai <[email protected]>
mac80211: Restore vif beacon interval if start ap fails

Lubomir Rintel <[email protected]>
gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2

René van Dorst <[email protected]>
gpio: MT7621: use a per instance irq_chip structure

Paul Burton <[email protected]>
MIPS: eBPF: Always return sign extended 32b values

Quentin Perret <[email protected]>
tracing: Fix number of entries in trace header

Mathieu Desnoyers <[email protected]>
ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction

-------------

Diffstat:

 Makefile                                           |   4 +-
 arch/arc/include/asm/cache.h                       |  11 ++
 arch/arc/kernel/head.S                             |  14 +-
 arch/arc/kernel/setup.c                            |  87 ++++++++----
 arch/arm/probes/kprobes/opt-arm.c                  |   2 +-
 arch/mips/configs/ath79_defconfig                  |   1 +
 arch/mips/jazz/jazzdma.c                           |   5 +-
 arch/mips/net/ebpf_jit.c                           |   9 +-
 arch/parisc/kernel/ptrace.c                        |  29 ++--
 arch/powerpc/kernel/head_8xx.S                     |   3 +-
 arch/x86/kvm/cpuid.c                               |   4 +
 arch/x86/xen/enlighten_pv.c                        |   5 +-
 drivers/acpi/nfit/core.c                           |   6 +-
 drivers/atm/he.c                                   |   2 +-
 drivers/gpio/gpio-mt7621.c                         |  20 +--
 drivers/gpio/gpio-pxa.c                            |   1 +
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c            |   1 +
 drivers/gpu/drm/amd/amdkfd/kfd_topology.c          |  12 +-
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c  |   5 +-
 .../amd/display/dc/dce110/dce110_hw_sequencer.c    |   7 +-
 drivers/gpu/drm/i915/intel_fbdev.c                 |  12 +-
 drivers/gpu/drm/meson/meson_drv.c                  |   9 +-
 drivers/gpu/drm/radeon/radeon_kms.c                |   1 +
 drivers/gpu/drm/sun4i/sun4i_backend.c              |   5 +-
 drivers/hwmon/tmp421.c                             |   2 +-
 drivers/infiniband/hw/mthca/mthca_provider.c       |   4 +-
 drivers/infiniband/ulp/srp/ib_srp.c                |  10 --
 drivers/isdn/hardware/avm/b1.c                     |   2 +-
 drivers/isdn/i4l/isdn_tty.c                        |   6 +-
 drivers/leds/leds-lp5523.c                         |   4 +-
 drivers/mfd/ab8500-core.c                          |   2 +-
 drivers/mfd/axp20x.c                               | 126 +++++++++--------
 drivers/mfd/bd9571mwv.c                            |   1 +
 drivers/mfd/cros_ec_dev.c                          |   1 +
 drivers/mfd/db8500-prcmu.c                         |   4 +-
 drivers/mfd/mc13xxx-core.c                         |   4 +-
 drivers/mfd/mt6397-core.c                          |   3 +-
 drivers/mfd/qcom_rpm.c                             |   4 +
 drivers/mfd/ti_am335x_tscadc.c                     |   5 +-
 drivers/mfd/tps65218.c                             |  24 +---
 drivers/mfd/twl-core.c                             |   4 +-
 drivers/mfd/wm5110-tables.c                        |   2 +
 drivers/net/ethernet/amazon/ena/ena_netdev.c       |  10 +-
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c     |   6 +
 drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c  |   6 +-
 drivers/net/ethernet/mellanox/mlx4/en_rx.c         |  22 ++-
 drivers/net/ethernet/mellanox/mlx4/icm.c           |  92 +++++++-----
 drivers/net/ethernet/mellanox/mlx4/icm.h           |  22 ++-
 drivers/net/ethernet/mellanox/mlx5/core/en.h       |   1 +
 drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c   |   6 +-
 drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h   |  17 +++
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c  |   2 +
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c   |   1 +
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c    |  25 ++--
 drivers/net/ethernet/mellanox/mlxsw/pci.c          |   4 +-
 .../ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c   |  10 +-
 .../ethernet/mellanox/mlxsw/spectrum_switchdev.c   |  12 +-
 drivers/net/ethernet/qlogic/qed/qed_ll2.c          |   4 +
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c |   6 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  51 +++----
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c   |  10 ++
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c    |   2 +
 drivers/net/geneve.c                               |  10 +-
 drivers/net/phy/sfp-bus.c                          |   2 +
 drivers/net/phy/sfp.c                              |  30 ++--
 drivers/net/phy/sfp.h                              |   2 +
 drivers/net/team/team.c                            |  27 +---
 drivers/pinctrl/pinctrl-max77620.c                 |  14 +-
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c                 |   9 +-
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c                 |  28 ++--
 drivers/scsi/cxgbi/libcxgbi.c                      |   7 +-
 drivers/scsi/cxgbi/libcxgbi.h                      |   5 +-
 drivers/scsi/isci/init.c                           |  14 +-
 drivers/scsi/qedi/qedi_iscsi.c                     |   3 +
 drivers/scsi/qedi/qedi_iscsi.h                     |   1 +
 drivers/scsi/qla4xxx/ql4_os.c                      |   2 +
 drivers/scsi/ufs/ufs.h                             |   2 +-
 drivers/scsi/ufs/ufshcd.c                          |   2 +
 drivers/staging/erofs/data.c                       |  31 +++--
 drivers/staging/erofs/dir.c                        |   7 +-
 drivers/staging/erofs/inode.c                      |  10 +-
 drivers/staging/erofs/internal.h                   |  70 ++++++----
 drivers/staging/erofs/super.c                      |  19 +--
 drivers/staging/erofs/unzip_pagevec.h              |   2 +-
 drivers/staging/erofs/unzip_vle.c                  |  95 +++++--------
 drivers/staging/erofs/unzip_vle.h                  |  12 +-
 drivers/staging/erofs/unzip_vle_lz4.c              |   2 +-
 drivers/staging/erofs/utils.c                      |  12 +-
 drivers/target/target_core_user.c                  |  88 ++++++++----
 drivers/vhost/vhost.c                              |   8 +-
 drivers/video/backlight/pwm_bl.c                   |  19 +--
 drivers/video/fbdev/udlfb.c                        | 141 +++++--------------
 drivers/watchdog/mt7621_wdt.c                      |   1 +
 drivers/watchdog/rt2880_wdt.c                      |   1 +
 drivers/xen/pvcalls-back.c                         |   9 +-
 drivers/xen/pvcalls-front.c                        | 100 +++++++++----
 fs/afs/flock.c                                     |   4 +-
 fs/afs/inode.c                                     |   3 +-
 fs/ceph/snap.c                                     |   3 +-
 fs/proc/base.c                                     |   4 -
 include/keys/user-type.h                           |   2 +-
 include/linux/compiler-clang.h                     |   5 +-
 include/linux/compiler-gcc.h                       |   4 -
 include/linux/compiler-intel.h                     |   4 +-
 include/linux/compiler.h                           |   4 +-
 include/linux/qed/qed_chain.h                      |  31 +++++
 include/linux/skbuff.h                             |   2 +-
 include/linux/virtio_net.h                         |  19 +++
 include/net/netfilter/nf_flow_table.h              |   1 -
 include/uapi/linux/inet_diag.h                     |  16 ++-
 include/video/udlfb.h                              |   3 -
 kernel/bpf/stackmap.c                              |  12 +-
 kernel/trace/trace.c                               |   2 +
 mm/mempolicy.c                                     |   6 +-
 net/batman-adv/soft-interface.c                    |   2 +
 net/bridge/br_fdb.c                                |   5 +
 net/bridge/br_multicast.c                          |   9 +-
 net/ceph/messenger.c                               |  15 +-
 net/core/filter.c                                  |   7 +-
 net/ipv4/inet_diag.c                               |  10 +-
 net/ipv4/netfilter/ipt_CLUSTERIP.c                 |  19 ++-
 net/ipv6/netfilter.c                               |   4 +-
 net/ipv6/seg6.c                                    |   4 +-
 net/ipv6/sit.c                                     |   3 +-
 net/ipv6/udp.c                                     |   8 +-
 net/mac80211/cfg.c                                 |   6 +-
 net/mac80211/mesh.h                                |   6 +
 net/mac80211/mesh_pathtbl.c                        | 155 ++++++---------------
 net/mac80211/rx.c                                  |   7 +-
 net/netfilter/nf_flow_table_core.c                 |   5 +-
 net/netfilter/nf_tables_api.c                      |   5 +
 net/netfilter/nfnetlink_osf.c                      |   4 +
 net/netfilter/nft_compat.c                         |   3 +-
 net/netfilter/nft_flow_offload.c                   |  13 +-
 net/packet/af_packet.c                             |   2 +-
 net/sched/cls_tcindex.c                            |  80 ++++++-----
 net/sctp/diag.c                                    |   1 +
 net/sctp/offload.c                                 |   1 +
 net/sctp/stream.c                                  |   4 +-
 net/socket.c                                       |  82 ++++++++---
 net/sunrpc/xprtrdma/verbs.c                        |   6 +-
 security/keys/key.c                                |   4 +-
 security/keys/keyring.c                            |   4 +-
 security/keys/proc.c                               |   3 +-
 security/keys/request_key.c                        |   1 +
 security/keys/request_key_auth.c                   |   2 +-
 sound/pci/hda/patch_realtek.c                      |  42 +++++-
 tools/testing/selftests/bpf/test_progs.c           |  30 ++++
 tools/testing/selftests/bpf/test_sock_addr.c       |  53 ++++++-
 .../selftests/net/forwarding/bridge_vlan_aware.sh  |  47 ++++++-
 .../selftests/tc-testing/tc-tests/actions/ife.json |  88 ++++++------
 .../tc-testing/tc-tests/actions/tunnel_key.json    |  31 +----
 152 files changed, 1464 insertions(+), 989 deletions(-)
author maintainer
#1 lore raw

PATCH 1/152 ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathieu Desnoyers <[email protected]>

commit 0ac569bf6a7983c0c5747d6df8db9dc05bc92b6c upstream.

commit e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE") introduced a regression in optimized kprobes. It triggers "invalid instruction" oopses when using kprobes instrumentation through lttng and perf. This commit was introduced in kernel v4.20, and has been backported to stable kernels 4.19 and 4.14.

This crash was also reported by Hongzhi Song on the redhat bugzilla where the patch was originally introduced.

Fixes e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE")
Cc Robert Berger <[email protected]>
Cc Masami Hiramatsu <[email protected]>
Cc William Cohen <[email protected]>
Cc Laura Abbott <[email protected]>
Cc Kees Cook <[email protected]>
Cc <[email protected]> # v4.14+
---
 arch/arm/probes/kprobes/opt-arm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/probes/kprobes/opt-arm.c +1 -1
@@ -247,7 +247,7 @@ int arch_prepare_optimized_kprobe(struct
 	}
 
 	/* Copy arch-dep-instance from template. */
-	memcpy(code, (unsigned char *)optprobe_template_entry,
+	memcpy(code, (unsigned long *)&optprobe_template_entry,
 			TMPL_END_IDX * sizeof(kprobe_opcode_t));
 
 	/* Adjust buffer according to instruction. */

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

author maintainer
#2 lore raw

PATCH 2/152 tracing: Fix number of entries in trace header

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Quentin Perret <[email protected]>

commit 9e7382153f80ba45a0bbcd540fb77d4b15f6e966 upstream.

The following commit

441dae8f2f29 ("tracing: Add support for display of tgid in trace output")

removed the call to print_event_info() from print_func_help_header_irq() which results in the ftrace header not reporting the number of entries written in the buffer. As this wasn't the original intent of the patch, re-introduce the call to print_event_info() to restore the orginal behaviour.

Fixes 441dae8f2f29 ("tracing: Add support for display of tgid in trace output")
---
 kernel/trace/trace.c |    2 ++
 1 file changed, 2 insertions(+)
kernel/trace/trace.c +2 -0
@@ -3383,6 +3383,8 @@ static void print_func_help_header_irq(s
 	const char tgid_space[] = "          ";
 	const char space[] = "  ";
 
+	print_event_info(buf, m);
+
 	seq_printf(m, "#                          %s  _-----=> irqs-off\n",
 		   tgid ? tgid_space : space);
 	seq_printf(m, "#                          %s / _----=> need-resched\n",
author maintainer
#3 lore raw

PATCH 3/152 MIPS: eBPF: Always return sign extended 32b values

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Burton <[email protected]>

commit 13443154f6cac61d148471ede6d7f1f6b5ea946a upstream.

The function prototype used to call JITed eBPF code (ie. the type of the struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64 ABI that MIPS64 kernels target defines that 32 bit integers should always be sign extended when passed in registers as either arguments or return values.

This means that when returning any value which may not already be sign extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform that sign extension in order to comply with the n64 ABI. Without this we see strange looking test failures from test_bpf.ko, such as:

test_bpf: #65 ALU64_MOV_X:

    dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)

Although the return value printed matches the expected value, this is only because printf is only examining the least significant 32 bits of the 64 bit register value we returned. The register holding the expected value is sign extended whilst the v0 register was set to a zero extended value by our JITed code, so when compared by a conditional branch instruction the values are not equal.

We already handle this when the return value register is of type REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.

Fixes b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.")
Cc [email protected] # v4.13+
---
 arch/mips/net/ebpf_jit.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
arch/mips/net/ebpf_jit.c +6 -3
@@ -343,12 +343,15 @@ static int build_int_epilogue(struct jit
 	const struct bpf_prog *prog = ctx->skf;
 	int stack_adjust = ctx->stack_size;
 	int store_offset = stack_adjust - 8;
+	enum reg_val_type td;
 	int r0 = MIPS_R_V0;
 
-	if (dest_reg == MIPS_R_RA &&
-	    get_reg_val_type(ctx, prog->len, BPF_REG_0) == REG_32BIT_ZERO_EX)
+	if (dest_reg == MIPS_R_RA) {
 		/* Don't let zero extended value escape. */
-		emit_instr(ctx, sll, r0, r0, 0);
+		td = get_reg_val_type(ctx, prog->len, BPF_REG_0);
+		if (td == REG_64BIT || td == REG_32BIT_ZERO_EX)
+			emit_instr(ctx, sll, r0, r0, 0);
+	}
 
 	if (ctx->flags & EBPF_SAVE_RA) {
 		emit_instr(ctx, ld, MIPS_R_RA, store_offset, MIPS_R_SP);
author maintainer
#4 lore raw

PATCH 4/152 gpio: MT7621: use a per instance irq_chip structure

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: René van Dorst <[email protected]>

commit fa84667b98fd1a191b2465d66b440bda6714b3bf upstream.

This fixes the kernel complains:
gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared
with multiple gpiochips: please fix the driver.
gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared
with multiple gpiochips: please fix the driver.

---
 drivers/gpio/gpio-mt7621.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpio/gpio-mt7621.c +10 -10
@@ -30,6 +30,7 @@
 #define GPIO_REG_EDGE		0xA0
 
 struct mtk_gc {
+	struct irq_chip irq_chip;
 	struct gpio_chip chip;
 	spinlock_t lock;
 	int bank;
@@ -189,13 +190,6 @@ mediatek_gpio_irq_type(struct irq_data *
 	return 0;
 }
 
-static struct irq_chip mediatek_gpio_irq_chip = {
-	.irq_unmask		= mediatek_gpio_irq_unmask,
-	.irq_mask		= mediatek_gpio_irq_mask,
-	.irq_mask_ack		= mediatek_gpio_irq_mask,
-	.irq_set_type		= mediatek_gpio_irq_type,
-};
-
 static int
 mediatek_gpio_xlate(struct gpio_chip *chip,
 		    const struct of_phandle_args *spec, u32 *flags)
@@ -254,6 +248,13 @@ mediatek_gpio_bank_probe(struct device *
 		return ret;
 	}
 
+	rg->irq_chip.name = dev_name(dev);
+	rg->irq_chip.parent_device = dev;
+	rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask;
+	rg->irq_chip.irq_mask = mediatek_gpio_irq_mask;
+	rg->irq_chip.irq_mask_ack = mediatek_gpio_irq_mask;
+	rg->irq_chip.irq_set_type = mediatek_gpio_irq_type;
+
 	if (mtk->gpio_irq) {
 		/*
 		 * Manually request the irq here instead of passing
@@ -270,14 +271,14 @@ mediatek_gpio_bank_probe(struct device *
 			return ret;
 		}
 
-		ret = gpiochip_irqchip_add(&rg->chip, &mediatek_gpio_irq_chip,
+		ret = gpiochip_irqchip_add(&rg->chip, &rg->irq_chip,
 					   0, handle_simple_irq, IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(dev, "failed to add gpiochip_irqchip\n");
 			return ret;
 		}
 
-		gpiochip_set_chained_irqchip(&rg->chip, &mediatek_gpio_irq_chip,
+		gpiochip_set_chained_irqchip(&rg->chip, &rg->irq_chip,
 					     mtk->gpio_irq, NULL);
 	}
 
@@ -310,7 +311,6 @@ mediatek_gpio_probe(struct platform_devi
 	mtk->gpio_irq = irq_of_parse_and_map(np, 0);
 	mtk->dev = dev;
 	platform_set_drvdata(pdev, mtk);
-	mediatek_gpio_irq_chip.name = dev_name(dev);
 
 	for (i = 0; i < MTK_BANK_CNT; i++) {
 		ret = mediatek_gpio_bank_probe(dev, np, i);
author maintainer
#5 lore raw

PATCH 5/152 gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lubomir Rintel <[email protected]>

commit af14b2c98adb85e9517390bb88309338b9075350 upstream.

Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either. See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for PXA3xx")

Fixes a770d946371e ("gpio: pxa: add pin control gpio direction and request")
---
 drivers/gpio/gpio-pxa.c |    1 +
 1 file changed, 1 insertion(+)
drivers/gpio/gpio-pxa.c +1 -0
@@ -245,6 +245,7 @@ static bool pxa_gpio_has_pinctrl(void)
 {
 	switch (gpio_type) {
 	case PXA3XX_GPIO:
+	case MMP2_GPIO:
 		return false;
 
 	default:
author maintainer
#6 lore raw

PATCH 6/152 mac80211: Restore vif beacon interval if start ap fails

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rakesh Pillai <[email protected]>

commit 83e37e0bdd1470bbe6612250b745ad39b1a7b130 upstream.

The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval.

The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value.

In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval.

To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval.

Tested on ath10k using WCN3990.

Fixes 0c317a02ca98 ("cfg80211: support virtual interfaces with different beacon intervals")
---
 net/mac80211/cfg.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
net/mac80211/cfg.c +5 -1
@@ -887,6 +887,7 @@ static int ieee80211_start_ap(struct wip
 		      BSS_CHANGED_P2P_PS |
 		      BSS_CHANGED_TXPOWER;
 	int err;
+	int prev_beacon_int;
 
 	old = sdata_dereference(sdata->u.ap.beacon, sdata);
 	if (old)
@@ -909,6 +910,7 @@ static int ieee80211_start_ap(struct wip
 
 	sdata->needed_rx_chains = sdata->local->rx_chains;
 
+	prev_beacon_int = sdata->vif.bss_conf.beacon_int;
 	sdata->vif.bss_conf.beacon_int = params->beacon_interval;
 
 	mutex_lock(&local->mtx);
@@ -917,8 +919,10 @@ static int ieee80211_start_ap(struct wip
 	if (!err)
 		ieee80211_vif_copy_chanctx_to_vlans(sdata, false);
 	mutex_unlock(&local->mtx);
-	if (err)
+	if (err) {
+		sdata->vif.bss_conf.beacon_int = prev_beacon_int;
 		return err;
+	}
 
 	/*
 	 * Apply control port protocol, this allows us to
author maintainer
#7 lore raw

PATCH 7/152 mac80211: Use linked list instead of rhashtable walk for mesh tables

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu <[email protected]>

commit b4c3fbe6360178dc2181b7b43b7ae793a192b282 upstream.

The mesh table code walks over hash tables for two purposes. First of all it's used as part of a netlink dump process, but it is also used for looking up entries to delete using criteria other than the hash key.

The second purpose is directly contrary to the design specification of rhashtable walks. It is only meant for use by netlink dumps.

This is because rhashtable is resizable and you cannot obtain a stable walk over it during a resize process.

In fact mesh's use of rhashtable for dumping is bogus too. Rather than using rhashtable walk's iterator to keep track of the current position, it always converts the current position to an integer which defeats the purpose of the iterator.

Therefore this patch converts all uses of rhashtable walk into a simple linked list.

This patch also adds a new spin lock to protect the hash table insertion/removal as well as the walk list modifications. In fact the previous code was buggy as the removals can race with each other, potentially resulting in a double-free.

---
 net/mac80211/mesh.h         |    6 +
 net/mac80211/mesh_pathtbl.c |  138 +++++++++++---------------------------------
 2 files changed, 43 insertions(+), 101 deletions(-)
net/mac80211/mesh.h +6 -0
@@ -70,6 +70,7 @@ enum mesh_deferred_task_flags {
  * @dst: mesh path destination mac address
  * @mpp: mesh proxy mac address
  * @rhash: rhashtable list pointer
+ * @walk_list: linked list containing all mesh_path objects.
  * @gate_list: list pointer for known gates list
  * @sdata: mesh subif
  * @next_hop: mesh neighbor to which frames for this destination will be
@@ -105,6 +106,7 @@ struct mesh_path {
 	u8 dst[ETH_ALEN];
 	u8 mpp[ETH_ALEN];	/* used for MPP or MAP */
 	struct rhash_head rhash;
+	struct hlist_node walk_list;
 	struct hlist_node gate_list;
 	struct ieee80211_sub_if_data *sdata;
 	struct sta_info __rcu *next_hop;
@@ -133,12 +135,16 @@ struct mesh_path {
  * gate's mpath may or may not be resolved and active.
  * @gates_lock: protects updates to known_gates
  * @rhead: the rhashtable containing struct mesh_paths, keyed by dest addr
+ * @walk_head: linked list containging all mesh_path objects
+ * @walk_lock: lock protecting walk_head
  * @entries: number of entries in the table
  */
 struct mesh_table {
 	struct hlist_head known_gates;
 	spinlock_t gates_lock;
 	struct rhashtable rhead;
+	struct hlist_head walk_head;
+	spinlock_t walk_lock;
 	atomic_t entries;		/* Up to MAX_MESH_NEIGHBOURS */
 };
 
net/mac80211/mesh_pathtbl.c +37 -101

250 lines not on this page · raw message

author maintainer
#8 lore raw

PATCH 8/152 mac80211: Free mpath object when rhashtable insertion fails

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu <[email protected]>

commit 4ff3a9d14c6c06eaa4e5976c61599ea2bd9e81b2 upstream.

When rhashtable insertion fails the mesh table code doesn't free the now-orphan mesh path object. This patch fixes that.

---
 net/mac80211/mesh_pathtbl.c |   17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
net/mac80211/mesh_pathtbl.c +9 -8
@@ -436,17 +436,15 @@ struct mesh_path *mesh_path_add(struct i
 	} while (unlikely(ret == -EEXIST && !mpath));
 	spin_unlock_bh(&tbl->walk_lock);
 
-	if (ret && ret != -EEXIST)
-		return ERR_PTR(ret);
-
-	/* At this point either new_mpath was added, or we found a
-	 * matching entry already in the table; in the latter case
-	 * free the unnecessary new entry.
-	 */
-	if (ret == -EEXIST) {
+	if (ret) {
 		kfree(new_mpath);
+
+		if (ret != -EEXIST)
+			return ERR_PTR(ret);
+
 		new_mpath = mpath;
 	}
+
 	sdata->u.mesh.mesh_paths_generation++;
 	return new_mpath;
 }
@@ -481,6 +479,9 @@ int mpp_path_add(struct ieee80211_sub_if
 		hlist_add_head_rcu(&new_mpath->walk_list, &tbl->walk_head);
 	spin_unlock_bh(&tbl->walk_lock);
 
+	if (ret)
+		kfree(new_mpath);
+
 	sdata->u.mesh.mpp_paths_generation++;
 	return ret;
 }
author maintainer
#9 lore raw

PATCH 9/152 libceph: handle an empty authorize reply

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov <[email protected]>

commit 0fd3fd0a9bb0b02b6435bb7070e9f7b82a23f068 upstream.

The authorize reply can be empty, for example when the ticket used to build the authorizer is too old and TAG_BADAUTHORIZER is returned from the service. Calling ->verify_authorizer_reply() results in an attempt to decrypt and validate (somewhat) random data in au->buf (most likely the signature block from calc_signature()), which fails and ends up in con_fault_finish() with !con->auth_retry. The ticket isn't invalidated and the connection is retried again and again until a new ticket is obtained from the monitor:

libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply

Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.

Fixes 5c056fdc5b47 ("libceph: verify authorize reply on connect")
---
 net/ceph/messenger.c |   15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
net/ceph/messenger.c +9 -6
@@ -2091,6 +2091,8 @@ static int process_connect(struct ceph_c
 	dout("process_connect on %p tag %d\n", con, (int)con->in_tag);
 
 	if (con->auth) {
+		int len = le32_to_cpu(con->in_reply.authorizer_len);
+
 		/*
 		 * Any connection that defines ->get_authorizer()
 		 * should also define ->add_authorizer_challenge() and
@@ -2100,8 +2102,7 @@ static int process_connect(struct ceph_c
 		 */
 		if (con->in_reply.tag == CEPH_MSGR_TAG_CHALLENGE_AUTHORIZER) {
 			ret = con->ops->add_authorizer_challenge(
-				    con, con->auth->authorizer_reply_buf,
-				    le32_to_cpu(con->in_reply.authorizer_len));
+				    con, con->auth->authorizer_reply_buf, len);
 			if (ret < 0)
 				return ret;
 
@@ -2111,10 +2112,12 @@ static int process_connect(struct ceph_c
 			return 0;
 		}
 
-		ret = con->ops->verify_authorizer_reply(con);
-		if (ret < 0) {
-			con->error_msg = "bad authorize reply";
-			return ret;
+		if (len) {
+			ret = con->ops->verify_authorizer_reply(con);
+			if (ret < 0) {
+				con->error_msg = "bad authorize reply";
+				return ret;
+			}
 		}
 	}
 
author maintainer
#10 lore raw

PATCH 10/152 ceph: avoid repeatedly adding inode to mdsc->snap_flush_list

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yan, Zheng <[email protected]>

commit 04242ff3ac0abbaa4362f97781dac268e6c3541a upstream.

Otherwise, mdsc->snap_flush_list may get corrupted.

---
 fs/ceph/snap.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ceph/snap.c +2 -1
@@ -616,7 +616,8 @@ int __ceph_finish_cap_snap(struct ceph_i
 	     capsnap->size);
 
 	spin_lock(&mdsc->snap_flush_lock);
-	list_add_tail(&ci->i_snap_flush_item, &mdsc->snap_flush_list);
+	if (list_empty(&ci->i_snap_flush_item))
+		list_add_tail(&ci->i_snap_flush_item, &mdsc->snap_flush_list);
 	spin_unlock(&mdsc->snap_flush_lock);
 	return 1;  /* caller may want to ceph_flush_snaps */
 }
author maintainer
#11 lore raw

PATCH 11/152 numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ralph Campbell <[email protected]>

commit 050c17f239fd53adb55aa768d4f41bc76c0fe045 upstream.

The system call, get_mempolicy() [1], passes an unsigned long *nodemask pointer and an unsigned long maxnode argument which specifies the length of the user's nodemask array in bits (which is rounded up). The manual page says that if the maxnode value is too small, get_mempolicy will return EINVAL but there is no system call to return this minimum value. To determine this value, some programs search /proc/<pid>/status for a line starting with "Mems_allowed:" and use the number of digits in the mask to determine the minimum value. A recent change to the way this line is formatted [2] causes these programs to compute a value less than MAX_NUMNODES so get_mempolicy() returns EINVAL.

Change get_mempolicy(), the older compat version of get_mempolicy(), and the copy_nodes_to_user() function to use nr_node_ids instead of MAX_NUMNODES, thus preserving the defacto method of computing the minimum size for the nodemask array and the maxnode argument.

[1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html
[2] https://lore.kernel.org/lkml/[email protected]

Fixes 4fb8e5b89bcbbbb ("include/linux/nodemask.h: use nr_node_ids (not MAX_NUMNODES) in __nodemask_pr_numnodes()")
Cc Waiman Long <[email protected]>
---
 mm/mempolicy.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
mm/mempolicy.c +3 -3
@@ -1300,7 +1300,7 @@ static int copy_nodes_to_user(unsigned l
 			      nodemask_t *nodes)
 {
 	unsigned long copy = ALIGN(maxnode-1, 64) / 8;
-	const int nbytes = BITS_TO_LONGS(MAX_NUMNODES) * sizeof(long);
+	unsigned int nbytes = BITS_TO_LONGS(nr_node_ids) * sizeof(long);
 
 	if (copy > nbytes) {
 		if (copy > PAGE_SIZE)
@@ -1477,7 +1477,7 @@ static int kernel_get_mempolicy(int __us
 	int uninitialized_var(pval);
 	nodemask_t nodes;
 
-	if (nmask != NULL && maxnode < MAX_NUMNODES)
+	if (nmask != NULL && maxnode < nr_node_ids)
 		return -EINVAL;
 
 	err = do_get_mempolicy(&pval, &nodes, addr, flags);
@@ -1513,7 +1513,7 @@ COMPAT_SYSCALL_DEFINE5(get_mempolicy, in
 	unsigned long nr_bits, alloc_size;
 	DECLARE_BITMAP(bm, MAX_NUMNODES);
 
-	nr_bits = min_t(unsigned long, maxnode-1, MAX_NUMNODES);
+	nr_bits = min_t(unsigned long, maxnode-1, nr_node_ids);
 	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
 
 	if (nmask)
author maintainer
#12 lore raw

PATCH 12/152 proc, oom: do not report alien mms when setting oom_score_adj

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Hocko <[email protected]>

commit b2b469939e93458753cfbf8282ad52636495965e upstream.

Tetsuo has reported that creating a thousands of processes sharing MM without SIGHAND (aka alien threads) and setting /proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1] to finish. This is especially worrisome that all that printing is done under RCU lock and this can potentially trigger RCU stall or softlockup detector.

The primary reason for the printk was to catch potential users who might depend on the behavior prior to 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") but after more than 2 years without a single report I guess it is safe to simply remove the printk altogether.

The next step should be moving oom_score_adj over to the mm struct and remove all the tasks crawling as suggested by [2]

[1] http://lkml.kernel.org/r/[email protected]
[2] http://lkml.kernel.org/r/[email protected]

---
 fs/proc/base.c |    4 ----
 1 file changed, 4 deletions(-)
fs/proc/base.c +0 -4
@@ -1084,10 +1084,6 @@ static int __set_oom_adj(struct file *fi
 
 			task_lock(p);
 			if (!p->vfork_done && process_shares_mm(p, mm)) {
-				pr_info("updating oom_score_adj for %d (%s) from %d to %d because it shares mm with %d (%s). Report if this is unexpected.\n",
-						task_pid_nr(p), p->comm,
-						p->signal->oom_score_adj, oom_adj,
-						task_pid_nr(task), task->comm);
 				p->signal->oom_score_adj = oom_adj;
 				if (!legacy && has_capability_noaudit(current, CAP_SYS_RESOURCE))
 					p->signal->oom_score_adj_min = (short)oom_adj;
author maintainer
#13 lore raw

PATCH 13/152 ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeremy Soller <[email protected]>

commit 7f665b1c3283aae5b61843136d0a8ee808ba3199 upstream.

On the System76 Oryx Pro (oryp5), there is a headset microphone input attached to 0x19 that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we have a separate microphone jack that is already configured correctly.

Since the ALC1220 does not have a fixup similar to ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, I have exposed the fixup from the ALC269 in a way that it can be accessed from the alc1220_fixup_system76_oryp5 function. In addition, the alc1220_fixup_clevo_p950 needs to be applied to gain speaker output.

---
 sound/pci/hda/patch_realtek.c |   28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
sound/pci/hda/patch_realtek.c +28 -0
@@ -1855,6 +1855,8 @@ enum {
 	ALC887_FIXUP_BASS_CHMAP,
 	ALC1220_FIXUP_GB_DUAL_CODECS,
 	ALC1220_FIXUP_CLEVO_P950,
+	ALC1220_FIXUP_SYSTEM76_ORYP5,
+	ALC1220_FIXUP_SYSTEM76_ORYP5_PINS,
 };
 
 static void alc889_fixup_coef(struct hda_codec *codec,
@@ -2056,6 +2058,17 @@ static void alc1220_fixup_clevo_p950(str
 	snd_hda_override_conn_list(codec, 0x1b, 1, conn1);
 }
 
+static void alc_fixup_headset_mode_no_hp_mic(struct hda_codec *codec,
+				const struct hda_fixup *fix, int action);
+
+static void alc1220_fixup_system76_oryp5(struct hda_codec *codec,
+				     const struct hda_fixup *fix,
+				     int action)
+{
+	alc1220_fixup_clevo_p950(codec, fix, action);
+	alc_fixup_headset_mode_no_hp_mic(codec, fix, action);
+}
+
 static const struct hda_fixup alc882_fixups[] = {
 	[ALC882_FIXUP_ABIT_AW9D_MAX] = {
 		.type = HDA_FIXUP_PINS,
@@ -2300,6 +2313,19 @@ static const struct hda_fixup alc882_fix
 		.type = HDA_FIXUP_FUNC,
 		.v.func = alc1220_fixup_clevo_p950,
 	},
+	[ALC1220_FIXUP_SYSTEM76_ORYP5] = {
+		.type = HDA_FIXUP_FUNC,
+		.v.func = alc1220_fixup_system76_oryp5,
+	},
+	[ALC1220_FIXUP_SYSTEM76_ORYP5_PINS] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			{ 0x19, 0x01a1913c }, /* use as headset mic, without its own jack detect */
+			{}
+		},
+		.chained = true,
+		.chain_id = ALC1220_FIXUP_SYSTEM76_ORYP5,
+	},
 };
 
 static const struct snd_pci_quirk alc882_fixup_tbl[] = {
@@ -2376,6 +2402,8 @@ static const struct snd_pci_quirk alc882
 	SND_PCI_QUIRK(0x1558, 0x9501, "Clevo P950HR", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1558, 0x95e1, "Clevo P95xER", ALC1220_FIXUP_CLEVO_P950),
 	SND_PCI_QUIRK(0x1558, 0x95e2, "Clevo P950ER", ALC1220_FIXUP_CLEVO_P950),
+	SND_PCI_QUIRK(0x1558, 0x96e1, "System76 Oryx Pro (oryp5)", ALC1220_FIXUP_SYSTEM76_ORYP5_PINS),
+	SND_PCI_QUIRK(0x1558, 0x97e1, "System76 Oryx Pro (oryp5)", ALC1220_FIXUP_SYSTEM76_ORYP5_PINS),
 	SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC882_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_FIXUP_EAPD),
 	SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", ALC882_FIXUP_LENOVO_Y530),
author maintainer
#14 lore raw

PATCH 14/152 ALSA: hda/realtek: Disable PC beep in passthrough on alc285

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hui Wang <[email protected]>

commit c8c6ee611926685a7d753409e0a6e48b9e1b8748 upstream.

It is reported that there's a constant background "hum/whitenoise" in the headset on the Lenovo X1 machines with the codec alc285, and it is confirmed that if we run the command below, the noise will stop.
sudo hda-verb /dev/snd/hwC0D0 0x1d SET_PIN_WIDGET_CONTROL 0x0

Then I consulted this issue with Kailang, he told me the pin 0x1d on this codec is used for PC beep in, the noise probably comes from this pin and we can also disable the PC beep in passthrough, then the PC beep in will not affect other sound playback.

Fixes c4cfcf6f4297 ("ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops")

Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1660581

---
 sound/pci/hda/patch_realtek.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)
sound/pci/hda/patch_realtek.c +13 -1
@@ -5601,6 +5601,7 @@ enum {
 	ALC294_FIXUP_ASUS_HEADSET_MIC,
 	ALC294_FIXUP_ASUS_SPK,
 	ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE,
+	ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE,
 };
 
 static const struct hda_fixup alc269_fixups[] = {
@@ -6534,6 +6535,17 @@ static const struct hda_fixup alc269_fix
 		.chained = true,
 		.chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC
 	},
+	[ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE] = {
+		.type = HDA_FIXUP_VERBS,
+		.v.verbs = (const struct hda_verb[]) {
+			/* Disable PCBEEP-IN passthrough */
+			{ 0x20, AC_VERB_SET_COEF_INDEX, 0x36 },
+			{ 0x20, AC_VERB_SET_PROC_COEF, 0x57d7 },
+			{ }
+		},
+		.chained = true,
+		.chain_id = ALC285_FIXUP_LENOVO_HEADPHONE_NOISE
+	},
 };
 
 static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -7215,7 +7227,7 @@ static const struct snd_hda_pin_quirk al
 		{0x12, 0x90a60130},
 		{0x19, 0x03a11020},
 		{0x21, 0x0321101f}),
-	SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_LENOVO_HEADPHONE_NOISE,
+	SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE,
 		{0x12, 0x90a60130},
 		{0x14, 0x90170110},
 		{0x19, 0x04a11040},
author maintainer
#15 lore raw

PATCH 15/152 KEYS: allow reaching the keys quotas exactly

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers <[email protected]>

commit a08bf91ce28ed3ae7b6fef35d843fef8dc8c2cd9 upstream.

If the sysctl 'kernel.keys.maxkeys' is set to some number n, then actually users can only add up to 'n - 1' keys. Likewise for 'kernel.keys.maxbytes' and the root_* versions of these sysctls. But these sysctls are apparently supposed to be *maximums*, as per their names and all documentation I could find -- the keyrings(7) man page, Documentation/security/keys/core.rst, and all the mentions of EDQUOT meaning that the key quota was *exceeded* (as opposed to reached).

Thus, fix the code to allow reaching the quotas exactly.

Fixes 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
---
 security/keys/key.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
security/keys/key.c +2 -2
@@ -265,8 +265,8 @@ struct key *key_alloc(struct key_type *t
 
 		spin_lock(&user->lock);
 		if (!(flags & KEY_ALLOC_QUOTA_OVERRUN)) {
-			if (user->qnkeys + 1 >= maxkeys ||
-			    user->qnbytes + quotalen >= maxbytes ||
+			if (user->qnkeys + 1 > maxkeys ||
+			    user->qnbytes + quotalen > maxbytes ||
 			    user->qnbytes + quotalen < user->qnbytes)
 				goto no_quota;
 		}
author maintainer
#16 lore raw

PATCH 16/152 backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 61170ee9386888f1e6f7e9cc58e8d9a8c2a3c1dd ]

Commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") made the parse-dt function return early when using an auto- generated brightness-table, but didn't take into account that some more settings were handled below the brightness handling, like power-on-delays and also setting the pdata enable-gpio to -EINVAL.

This surfaces for example in the case of a backlight without any enable-gpio which then tries to use gpio-0 in error.

Fix this by simply moving the trailing settings above the brightness handling.

Fixes 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye")
---
 drivers/video/backlight/pwm_bl.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
drivers/video/backlight/pwm_bl.c +10 -9
index bdfcc0a71db14..6bde543452f25 100644
@@ -262,6 +262,16 @@ static int pwm_backlight_parse_dt(struct device *dev,
 
 	memset(data, 0, sizeof(*data));
 
+	/*
+	 * These values are optional and set as 0 by default, the out values
+	 * are modified only if a valid u32 value can be decoded.
+	 */
+	of_property_read_u32(node, "post-pwm-on-delay-ms",
+			     &data->post_pwm_on_delay);
+	of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay);
+
+	data->enable_gpio = -EINVAL;
+
 	/*
 	 * Determine the number of brightness levels, if this property is not
 	 * set a default table of brightness levels will be used.
@@ -374,15 +384,6 @@ static int pwm_backlight_parse_dt(struct device *dev,
 		data->max_brightness--;
 	}
 
-	/*
-	 * These values are optional and set as 0 by default, the out values
-	 * are modified only if a valid u32 value can be decoded.
-	 */
-	of_property_read_u32(node, "post-pwm-on-delay-ms",
-			     &data->post_pwm_on_delay);
-	of_property_read_u32(node, "pwm-off-delay-ms", &data->pwm_off_delay);
-
-	data->enable_gpio = -EINVAL;
 	return 0;
 }
 
Signature · 1 line
2.19.1
author maintainer
#17 lore raw

PATCH 17/152 mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]

Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that different instances are uniquely identified. This is required in order to support registering of multiple instances of same ti_am335x_tscadc IP.

---
 drivers/mfd/ti_am335x_tscadc.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/mfd/ti_am335x_tscadc.c +3 -2
index 7a30546880a42..fe8d335a4d74d 100644
@@ -264,8 +264,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 		cell->pdata_size = sizeof(tscadc);
 	}
 
-	err = mfd_add_devices(&pdev->dev, pdev->id, tscadc->cells,
-			tscadc->used_cells, NULL, 0, NULL);
+	err = mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+			      tscadc->cells, tscadc->used_cells, NULL,
+			      0, NULL);
 	if (err < 0)
 		goto err_disable_clk;
 
Signature · 1 line
2.19.1
author maintainer
#18 lore raw

PATCH 18/152 pvcalls-front: read all data before closing the connection

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b79470b64fa9266948d1ce8d825ced94c4f63293 ]

When a connection is closing in_error is set to ENOTCONN. There could still be outstanding data on the ring left by the backend. Before closing the connection on the frontend side, drain the ring.

---
 drivers/xen/pvcalls-front.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/xen/pvcalls-front.c +1 -3
index 77224d8f3e6fe..e5d95aab2cb80 100644
@@ -560,15 +560,13 @@ static int __read_ring(struct pvcalls_data_intf *intf,
 	error = intf->in_error;
 	/* get pointers before reading from the ring */
 	virt_rmb();
-	if (error < 0)
-		return error;
 
 	size = pvcalls_queued(prod, cons, array_size);
 	masked_prod = pvcalls_mask(prod, array_size);
 	masked_cons = pvcalls_mask(cons, array_size);
 
 	if (size == 0)
-		return 0;
+		return error ?: size;
 
 	if (len > size)
 		len = size;
Signature · 1 line
2.19.1
author maintainer
#19 lore raw

PATCH 19/152 pvcalls-front: dont try to free unallocated rings

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 96283f9a084e23d7cda2d3c5d1ffa6df6cf1ecec ]

inflight_req_id is 0 when initialized. If inflight_req_id is 0, there is no accept_map to free. Fix the check in pvcalls_front_release.

---
 drivers/xen/pvcalls-front.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/xen/pvcalls-front.c +2 -2
index e5d95aab2cb80..4f3d664b3f39e 100644
@@ -1030,8 +1030,8 @@ int pvcalls_front_release(struct socket *sock)
 		spin_lock(&bedata->socket_lock);
 		list_del(&map->list);
 		spin_unlock(&bedata->socket_lock);
-		if (READ_ONCE(map->passive.inflight_req_id) !=
-		    PVCALLS_INVALID_ID) {
+		if (READ_ONCE(map->passive.inflight_req_id) != PVCALLS_INVALID_ID &&
+			READ_ONCE(map->passive.inflight_req_id) != 0) {
 			pvcalls_front_free_map(bedata,
 					       map->passive.accept_map);
 		}
Signature · 1 line
2.19.1
author maintainer
#20 lore raw

PATCH 20/152 pvcalls-front: properly allocate sk

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit beee1fbe8f7d57d6ebaa5188f9f4db89c2077196 ]

Don't use kzalloc: it ends up leaving sk->sk_prot not properly initialized. Use sk_alloc instead and define our own trivial struct proto.

---
 drivers/xen/pvcalls-front.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/xen/pvcalls-front.c +7 -1
index 4f3d664b3f39e..01588582ae663 100644
@@ -31,6 +31,12 @@
 #define PVCALLS_NR_RSP_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
 #define PVCALLS_FRONT_MAX_SPIN 5000
 
+static struct proto pvcalls_proto = {
+	.name	= "PVCalls",
+	.owner	= THIS_MODULE,
+	.obj_size = sizeof(struct sock),
+};
+
 struct pvcalls_bedata {
 	struct xen_pvcalls_front_ring ring;
 	grant_ref_t ref;
@@ -837,7 +843,7 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
 
 received:
 	map2->sock = newsock;
-	newsock->sk = kzalloc(sizeof(*newsock->sk), GFP_KERNEL);
+	newsock->sk = sk_alloc(sock_net(sock->sk), PF_INET, GFP_KERNEL, &pvcalls_proto, false);
 	if (!newsock->sk) {
 		bedata->rsp[req_id].req_id = PVCALLS_INVALID_ID;
 		map->passive.inflight_req_id = PVCALLS_INVALID_ID;
Signature · 1 line
2.19.1
author maintainer
#21 lore raw

PATCH 21/152 pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e6587cdbd732eacb4c7ce592ed46f7bbcefb655f ]

When a connection is closing we receive on pvcalls_sk_state_change notification. Instead of setting the connection as closed immediately (-ENOTCONN), let's read one more time from it: pvcalls_conn_back_read will set the connection as closed when necessary.

That way, we avoid races between pvcalls_sk_state_change and pvcalls_back_ioworker.

---
 drivers/xen/pvcalls-back.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/xen/pvcalls-back.c +4 -3
index b1092fbefa630..e8b3ff8e7868b 100644
@@ -160,9 +160,10 @@ static void pvcalls_conn_back_read(void *opaque)
 
 	/* write the data, then modify the indexes */
 	virt_wmb();
-	if (ret < 0)
+	if (ret < 0) {
+		atomic_set(&map->read, 0);
 		intf->in_error = ret;
-	else
+	} else
 		intf->in_prod = prod + ret;
 	/* update the indexes, then notify the other end */
 	virt_wmb();
@@ -288,7 +289,7 @@ static void pvcalls_sk_state_change(struct sock *sock)
 		return;
 
 	intf = map->ring;
-	intf->in_error = -ENOTCONN;
+	atomic_inc(&map->read);
 	notify_remote_via_irq(map->irq);
 }
 
Signature · 1 line
2.19.1
author maintainer
#22 lore raw

PATCH 22/152 mfd: twl-core: Fix section annotations on {,un}protect_pm_master

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]

When building the kernel with Clang, the following section mismatch warning appears:

WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from the function twl_probe() to the function .init.text:unprotect_pm_master()
The function twl_probe() references
the function __init unprotect_pm_master().
This is often because twl_probe lacks a __init
annotation or the annotation of unprotect_pm_master is wrong.

Remove the __init annotation on the *protect_pm_master functions so there is no more mismatch.

---
 drivers/mfd/twl-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mfd/twl-core.c +2 -2
index 4be3d239da9ec..299016bc46d90 100644
@@ -979,7 +979,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,
  * letting it generate the right frequencies for USB, MADC, and
  * other purposes.
  */
-static inline int __init protect_pm_master(void)
+static inline int protect_pm_master(void)
 {
 	int e = 0;
 
@@ -988,7 +988,7 @@ static inline int __init protect_pm_master(void)
 	return e;
 }
 
-static inline int __init unprotect_pm_master(void)
+static inline int unprotect_pm_master(void)
 {
 	int e = 0;
 
Signature · 1 line
2.19.1
author maintainer
#23 lore raw

PATCH 23/152 mfd: db8500-prcmu: Fix some section annotations

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]

When building the kernel with Clang, the following section mismatch warnings appear:

WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:init_prcm_registers()
The function db8500_prcmu_probe() references
the function __init init_prcm_registers().
This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of init_prcm_registers is wrong.

WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:fw_project_name()
The function db8500_prcmu_probe() references
the function __init fw_project_name().
This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of fw_project_name is wrong.

db8500_prcmu_probe should not be marked as __init so remove the __init annotation from fw_project_name and init_prcm_registers.

---
 drivers/mfd/db8500-prcmu.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mfd/db8500-prcmu.c +2 -2
index 5970b8def5487..aec20e1c7d3d5 100644
@@ -2584,7 +2584,7 @@ static struct irq_chip prcmu_irq_chip = {
 	.irq_unmask	= prcmu_irq_unmask,
 };
 
-static __init char *fw_project_name(u32 project)
+static char *fw_project_name(u32 project)
 {
 	switch (project) {
 	case PRCMU_FW_PROJECT_U8500:
@@ -2732,7 +2732,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size)
 	INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
 }
 
-static void __init init_prcm_registers(void)
+static void init_prcm_registers(void)
 {
 	u32 val;
 
Signature · 1 line
2.19.1
author maintainer
#24 lore raw

PATCH 24/152 mfd: mt6397: Do not call irq_domain_remove if PMIC unsupported

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a177276aa098aa47a100d51a13eaaef029604b6d ]

If the PMIC ID is unknown, the current code would call irq_domain_remove and panic, as pmic->irq_domain is only initialized by mt6397_irq_init.

Return immediately with an error, if the chip ID is unsupported.

---
 drivers/mfd/mt6397-core.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/mfd/mt6397-core.c +1 -2
index 77b64bd64df36..ab24e176ef448 100644
@@ -329,8 +329,7 @@ static int mt6397_probe(struct platform_device *pdev)
 
 	default:
 		dev_err(&pdev->dev, "unsupported chip: %d\n", id);
-		ret = -ENODEV;
-		break;
+		return -ENODEV;
 	}
 
 	if (ret) {
Signature · 1 line
2.19.1
author maintainer
#25 lore raw

PATCH 25/152 mfd: ab8500-core: Return zero in get_register_interruptible()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]

This function is supposed to return zero on success or negative error codes on error. Unfortunately, there is a bug so it sometimes returns non-zero, positive numbers on success.

I noticed this bug during review and I can't test it. It does appear that the return is sometimes propogated back to _regmap_read() where all non-zero returns are treated as failure so this may affect run time.

Fixes 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface")
---
 drivers/mfd/ab8500-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mfd/ab8500-core.c +1 -1
index 30d09d1771717..11ab17f64c649 100644
@@ -261,7 +261,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
 	mutex_unlock(&ab8500->lock);
 	dev_vdbg(ab8500->dev, "rd: addr %#x => data %#x\n", addr, ret);
 
-	return ret;
+	return (ret < 0) ? ret : 0;
 }
 
 static int ab8500_get_register(struct device *dev, u8 bank,
Signature · 1 line
2.19.1
author maintainer
#26 lore raw

PATCH 26/152 mfd: bd9571mwv: Add volatile register to make DVFS work

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b0aff01e7aa6ad2d6998ef1323843212d1db8b04 ]

Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table, the physical register value is not updated by regmap and DVFS doesn't work as expected. Fix it!

Fixes d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
[wsa: rebase, add 'Fixes', reword commit message]
---
 drivers/mfd/bd9571mwv.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/bd9571mwv.c +1 -0
index 503979c81dae1..fab3cdc27ed64 100644
@@ -59,6 +59,7 @@ static const struct regmap_access_table bd9571mwv_writable_table = {
 };
 
 static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = {
+	regmap_reg_range(BD9571MWV_DVFS_MONIVDAC, BD9571MWV_DVFS_MONIVDAC),
 	regmap_reg_range(BD9571MWV_GPIO_IN, BD9571MWV_GPIO_IN),
 	regmap_reg_range(BD9571MWV_GPIO_INT, BD9571MWV_GPIO_INT),
 	regmap_reg_range(BD9571MWV_INT_INTREQ, BD9571MWV_INT_INTREQ),
Signature · 1 line
2.19.1
author maintainer
#27 lore raw

PATCH 27/152 mfd: qcom_rpm: write fw_version to CTRL_REG

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 504e4175829c44328773b96ad9c538e4783a8d22 ]

This is required as part of the initialization sequence on certain SoCs.

If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device).

---
 drivers/mfd/qcom_rpm.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/mfd/qcom_rpm.c +4 -0
index 52fafea06067e..8d420c37b2a61 100644
@@ -638,6 +638,10 @@ static int qcom_rpm_probe(struct platform_device *pdev)
 		return -EFAULT;
 	}
 
+	writel(fw_version[0], RPM_CTRL_REG(rpm, 0));
+	writel(fw_version[1], RPM_CTRL_REG(rpm, 1));
+	writel(fw_version[2], RPM_CTRL_REG(rpm, 2));
+
 	dev_info(&pdev->dev, "RPM firmware %u.%u.%u\n", fw_version[0],
 							fw_version[1],
 							fw_version[2]);
Signature · 1 line
2.19.1
author maintainer
#28 lore raw

PATCH 28/152 mfd: wm5110: Add missing ASRC rate register

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]

---
 drivers/mfd/wm5110-tables.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/mfd/wm5110-tables.c +2 -0
index 1ee68bd440fbc..16c6e2accfaa5 100644
@@ -1618,6 +1618,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000ECD, 0x0000 },    /* R3789  - HPLPF4_2 */
 	{ 0x00000EE0, 0x0000 },    /* R3808  - ASRC_ENABLE */
 	{ 0x00000EE2, 0x0000 },    /* R3810  - ASRC_RATE1 */
+	{ 0x00000EE3, 0x4000 },    /* R3811  - ASRC_RATE2 */
 	{ 0x00000EF0, 0x0000 },    /* R3824  - ISRC 1 CTRL 1 */
 	{ 0x00000EF1, 0x0000 },    /* R3825  - ISRC 1 CTRL 2 */
 	{ 0x00000EF2, 0x0000 },    /* R3826  - ISRC 1 CTRL 3 */
@@ -2869,6 +2870,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ASRC_ENABLE:
 	case ARIZONA_ASRC_STATUS:
 	case ARIZONA_ASRC_RATE1:
+	case ARIZONA_ASRC_RATE2:
 	case ARIZONA_ISRC_1_CTRL_1:
 	case ARIZONA_ISRC_1_CTRL_2:
 	case ARIZONA_ISRC_1_CTRL_3:
Signature · 1 line
2.19.1
author maintainer
#29 lore raw

PATCH 29/152 mfd: axp20x: Add AC power supply cell for AXP813

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4a19f9a65375ca9781b3ca9e810ece92edfc3e78 ]

As axp20x-ac-power-supply now supports AXP813, add a cell for it.

---
 drivers/mfd/axp20x.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/mfd/axp20x.c +5 -0
index 0be511dd93d01..dfc3cff1d08b4 100644
@@ -778,6 +778,11 @@ static const struct mfd_cell axp813_cells[] = {
 	}, {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp813-battery-power-supply",
+	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp813-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
+		.resources	= axp20x_ac_power_supply_resources,
 	},
 };
 
Signature · 1 line
2.19.1
author maintainer
#30 lore raw

PATCH 30/152 mfd: axp20x: Re-align MFD cell entries

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 753a8d083e085c6f552c7982749de4cc7c40e2ac ]

In the axp20x driver, the various mfd_cell lists had varying amounts of indentation, sometimes even within the same list. For the axp288, there's no alignment at all.

Re-align the right hand side of the assignments with the least amount of tabs possible. Also collapse the closing bracket and the opening bracket of the next entry onto the same line for the axp288, to be consistent with all the other mfd_cell lists.

This patch is whitespace change only. No functionality is modified.

---
 drivers/mfd/axp20x.c | 107 +++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 56 deletions(-)
drivers/mfd/axp20x.c +51 -56
index dfc3cff1d08b4..8037b4e01ed67 100644
@@ -640,9 +640,9 @@ static const struct mfd_cell axp221_cells[] = {
 
 static const struct mfd_cell axp223_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp22x_pek_resources),
-		.resources		= axp22x_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp22x_pek_resources),
+		.resources	= axp22x_pek_resources,
 	}, {
 		.name		= "axp22x-adc",
 		.of_compatible	= "x-powers,axp221-adc",
@@ -650,7 +650,7 @@ static const struct mfd_cell axp223_cells[] = {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp221-battery-power-supply",
 	}, {
-		.name			= "axp20x-regulator",
+		.name		= "axp20x-regulator",
 	}, {
 		.name		= "axp20x-ac-power-supply",
 		.of_compatible	= "x-powers,axp221-ac-power-supply",
@@ -666,9 +666,9 @@ static const struct mfd_cell axp223_cells[] = {
 
 static const struct mfd_cell axp152_cells[] = {
 	{
-		.name			= "axp20x-pek",
-		.num_resources		= ARRAY_SIZE(axp152_pek_resources),
-		.resources		= axp152_pek_resources,
+		.name		= "axp20x-pek",
+		.num_resources	= ARRAY_SIZE(axp152_pek_resources),
+		.resources	= axp152_pek_resources,
 	},
 };
 
@@ -697,84 +697,79 @@ static const struct resource axp288_charger_resources[] = {
 
 static const struct mfd_cell axp288_cells[] = {
 	{
-		.name = "axp288_adc",
-		.num_resources = ARRAY_SIZE(axp288_adc_resources),
-		.resources = axp288_adc_resources,
-	},
-	{
-		.name = "axp288_extcon",
-		.num_resources = ARRAY_SIZE(axp288_extcon_resources),
-		.resources = axp288_extcon_resources,
-	},
-	{
-		.name = "axp288_charger",
-		.num_resources = ARRAY_SIZE(axp288_charger_resources),
-		.resources = axp288_charger_resources,
-	},
-	{
-		.name = "axp288_fuel_gauge",
-		.num_resources = ARRAY_SIZE(axp288_fuel_gauge_resources),
-		.resources = axp288_fuel_gauge_resources,
-	},
-	{
-		.name = "axp221-pek",
-		.num_resources = ARRAY_SIZE(axp288_power_button_resources),
-		.resources = axp288_power_button_resources,
-	},
-	{
-		.name = "axp288_pmic_acpi",
+		.name		= "axp288_adc",
+		.num_resources	= ARRAY_SIZE(axp288_adc_resources),
+		.resources	= axp288_adc_resources,
+	}, {
+		.name		= "axp288_extcon",
+		.num_resources	= ARRAY_SIZE(axp288_extcon_resources),
+		.resources	= axp288_extcon_resources,
+	}, {
+		.name		= "axp288_charger",
+		.num_resources	= ARRAY_SIZE(axp288_charger_resources),
+		.resources	= axp288_charger_resources,
+	}, {
+		.name		= "axp288_fuel_gauge",
+		.num_resources	= ARRAY_SIZE(axp288_fuel_gauge_resources),
+		.resources	= axp288_fuel_gauge_resources,
+	}, {
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp288_power_button_resources),
+		.resources	= axp288_power_button_resources,
+	}, {
+		.name		= "axp288_pmic_acpi",
 	},
 };
 
 static const struct mfd_cell axp803_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp803_pek_resources),
-		.resources		= axp803_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp803_pek_resources),
+		.resources	= axp803_pek_resources,
 	},
-	{	.name			= "axp20x-regulator" },
+	{	.name		= "axp20x-regulator" },
 };
 
 static const struct mfd_cell axp806_self_working_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp806_pek_resources),
-		.resources		= axp806_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp806_pek_resources),
+		.resources	= axp806_pek_resources,
 	},
-	{	.name			= "axp20x-regulator" },
+	{	.name		= "axp20x-regulator" },
 };
 
 static const struct mfd_cell axp806_cells[] = {
 	{
-		.id			= 2,
-		.name			= "axp20x-regulator",
+		.id		= 2,
+		.name		= "axp20x-regulator",
 	},
 };
 
 static const struct mfd_cell axp809_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp809_pek_resources),
-		.resources		= axp809_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp809_pek_resources),
+		.resources	= axp809_pek_resources,
 	}, {
-		.id			= 1,
-		.name			= "axp20x-regulator",
+		.id		= 1,
+		.name		= "axp20x-regulator",
 	},
 };
 
 static const struct mfd_cell axp813_cells[] = {
 	{
-		.name			= "axp221-pek",
-		.num_resources		= ARRAY_SIZE(axp803_pek_resources),
-		.resources		= axp803_pek_resources,
+		.name		= "axp221-pek",
+		.num_resources	= ARRAY_SIZE(axp803_pek_resources),
+		.resources	= axp803_pek_resources,
 	}, {
-		.name			= "axp20x-regulator",
+		.name		= "axp20x-regulator",
 	}, {
-		.name			= "axp20x-gpio",
-		.of_compatible		= "x-powers,axp813-gpio",
+		.name		= "axp20x-gpio",
+		.of_compatible	= "x-powers,axp813-gpio",
 	}, {
-		.name			= "axp813-adc",
-		.of_compatible		= "x-powers,axp813-adc",
+		.name		= "axp813-adc",
+		.of_compatible	= "x-powers,axp813-adc",
 	}, {
 		.name		= "axp20x-battery-power-supply",
 		.of_compatible	= "x-powers,axp813-battery-power-supply",
Signature · 1 line
2.19.1
author maintainer
#31 lore raw

PATCH 31/152 mfd: axp20x: Add supported cells for AXP803

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ea90e7b47f0a8bd2fe14e9a88f523de7c67db90a ]

Parts of the AXP803 are compatible with their counterparts on the AXP813. These include the GPIO, ADC, AC and battery power supplies.

---
 drivers/mfd/axp20x.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/mfd/axp20x.c +14 -0
index 8037b4e01ed67..f8e0fa97bb31e 100644
@@ -726,6 +726,20 @@ static const struct mfd_cell axp803_cells[] = {
 		.name		= "axp221-pek",
 		.num_resources	= ARRAY_SIZE(axp803_pek_resources),
 		.resources	= axp803_pek_resources,
+	}, {
+		.name		= "axp20x-gpio",
+		.of_compatible	= "x-powers,axp813-gpio",
+	}, {
+		.name		= "axp813-adc",
+		.of_compatible	= "x-powers,axp813-adc",
+	}, {
+		.name		= "axp20x-battery-power-supply",
+		.of_compatible	= "x-powers,axp813-battery-power-supply",
+	}, {
+		.name		= "axp20x-ac-power-supply",
+		.of_compatible	= "x-powers,axp813-ac-power-supply",
+		.num_resources	= ARRAY_SIZE(axp20x_ac_power_supply_resources),
+		.resources	= axp20x_ac_power_supply_resources,
 	},
 	{	.name		= "axp20x-regulator" },
 };
Signature · 1 line
2.19.1
author maintainer
#32 lore raw

PATCH 32/152 mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 18e294ddafaeb80a1e2e10c9bd750a6cb8388d5b ]

The driver adds different MFD child devices via mfd_add_devices() and hence it is required to call mfd_remove_devices() to remove MFD child devices.

Fixes 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd")
---
 drivers/mfd/cros_ec_dev.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/cros_ec_dev.c +1 -0
index 6b22d54a540d1..bccde3eac92ca 100644
@@ -499,6 +499,7 @@ static int ec_device_remove(struct platform_device *pdev)
 
 	cros_ec_debugfs_remove(ec);
 
+	mfd_remove_devices(ec->dev);
 	cdev_del(&ec->cdev);
 	device_unregister(&ec->class_dev);
 	return 0;
Signature · 1 line
2.19.1
author maintainer
#33 lore raw

PATCH 33/152 mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 75d4c5e03c2ae9902ab521024b10291f6fc9515b ]

Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function.

---
 drivers/mfd/tps65218.c | 24 +++---------------------
 1 file changed, 3 insertions(+), 21 deletions(-)
drivers/mfd/tps65218.c +3 -21
index 910f569ff77c1..8bcdecf494d05 100644
@@ -235,9 +235,9 @@ static int tps65218_probe(struct i2c_client *client,
 
 	mutex_init(&tps->tps_lock);
 
-	ret = regmap_add_irq_chip(tps->regmap, tps->irq,
-			IRQF_ONESHOT, 0, &tps65218_irq_chip,
-			&tps->irq_data);
+	ret = devm_regmap_add_irq_chip(&client->dev, tps->regmap, tps->irq,
+				       IRQF_ONESHOT, 0, &tps65218_irq_chip,
+				       &tps->irq_data);
 	if (ret < 0)
 		return ret;
 
@@ -253,26 +253,9 @@ static int tps65218_probe(struct i2c_client *client,
 			      ARRAY_SIZE(tps65218_cells), NULL, 0,
 			      regmap_irq_get_domain(tps->irq_data));
 
-	if (ret < 0)
-		goto err_irq;
-
-	return 0;
-
-err_irq:
-	regmap_del_irq_chip(tps->irq, tps->irq_data);
-
 	return ret;
 }
 
-static int tps65218_remove(struct i2c_client *client)
-{
-	struct tps65218 *tps = i2c_get_clientdata(client);
-
-	regmap_del_irq_chip(tps->irq, tps->irq_data);
-
-	return 0;
-}
-
 static const struct i2c_device_id tps65218_id_table[] = {
 	{ "tps65218", TPS65218 },
 	{ },
@@ -285,7 +268,6 @@ static struct i2c_driver tps65218_driver = {
 		.of_match_table = of_tps65218_match_table,
 	},
 	.probe		= tps65218_probe,
-	.remove		= tps65218_remove,
 	.id_table       = tps65218_id_table,
 };
 
Signature · 1 line
2.19.1
author maintainer
#34 lore raw

PATCH 34/152 mfd: mc13xxx: Fix a missing check of a register-read failure

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]

When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails.

---
 drivers/mfd/mc13xxx-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mfd/mc13xxx-core.c +3 -1
index c63e331738c17..234febfe6398b 100644
@@ -274,7 +274,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode,
 
 	mc13xxx->adcflags |= MC13XXX_ADC_WORKING;
 
-	mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	ret = mc13xxx_reg_read(mc13xxx, MC13XXX_ADC0, &old_adc0);
+	if (ret)
+		goto out;
 
 	adc0 = MC13XXX_ADC0_ADINC1 | MC13XXX_ADC0_ADINC2;
 	adc1 = MC13XXX_ADC1_ADEN | MC13XXX_ADC1_ADTRIGIGN | MC13XXX_ADC1_ASC;
Signature · 1 line
2.19.1
author maintainer
#35 lore raw

PATCH 35/152 xen/pvcalls: remove set but not used variable intf

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 1f8ce09b36c41a026a37a24b20efa32000892a64 ]

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change':
drivers/xen/pvcalls-back.c:286:28: warning:
variable 'intf' set but not used [-Wunused-but-set-variable]

It not used since e6587cdbd732 ("pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read")

---
 drivers/xen/pvcalls-back.c | 2 --
 1 file changed, 2 deletions(-)
drivers/xen/pvcalls-back.c +0 -2
index e8b3ff8e7868b..d4ea33581ac26 100644
@@ -283,12 +283,10 @@ static int pvcalls_back_socket(struct xenbus_device *dev,
 static void pvcalls_sk_state_change(struct sock *sock)
 {
 	struct sock_mapping *map = sock->sk_user_data;
-	struct pvcalls_data_intf *intf;
 
 	if (map == NULL)
 		return;
 
-	intf = map->ring;
 	atomic_inc(&map->read);
 	notify_remote_via_irq(map->irq);
 }
Signature · 1 line
2.19.1
author maintainer
#36 lore raw

PATCH 36/152 qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2d533a9287f2011632977e87ce2783f4c689c984 ]

In PBL chains with non power of 2 page count, the producer is not at the beginning of the chain when index is 0 after a wrap. Therefore, after the producer index wrap around, page index should be calculated more carefully.

---
 include/linux/qed/qed_chain.h | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
include/linux/qed/qed_chain.h +31 -0
index 59ddf9af909e4..2dd0a9ed5b361 100644
@@ -663,6 +663,37 @@ static inline void *qed_chain_get_last_elem(struct qed_chain *p_chain)
 static inline void qed_chain_set_prod(struct qed_chain *p_chain,
 				      u32 prod_idx, void *p_prod_elem)
 {
+	if (p_chain->mode == QED_CHAIN_MODE_PBL) {
+		u32 cur_prod, page_mask, page_cnt, page_diff;
+
+		cur_prod = is_chain_u16(p_chain) ? p_chain->u.chain16.prod_idx :
+			   p_chain->u.chain32.prod_idx;
+
+		/* Assume that number of elements in a page is power of 2 */
+		page_mask = ~p_chain->elem_per_page_mask;
+
+		/* Use "cur_prod - 1" and "prod_idx - 1" since producer index
+		 * reaches the first element of next page before the page index
+		 * is incremented. See qed_chain_produce().
+		 * Index wrap around is not a problem because the difference
+		 * between current and given producer indices is always
+		 * positive and lower than the chain's capacity.
+		 */
+		page_diff = (((cur_prod - 1) & page_mask) -
+			     ((prod_idx - 1) & page_mask)) /
+			    p_chain->elem_per_page;
+
+		page_cnt = qed_chain_get_page_cnt(p_chain);
+		if (is_chain_u16(p_chain))
+			p_chain->pbl.c.u16.prod_page_idx =
+				(p_chain->pbl.c.u16.prod_page_idx -
+				 page_diff + page_cnt) % page_cnt;
+		else
+			p_chain->pbl.c.u32.prod_page_idx =
+				(p_chain->pbl.c.u32.prod_page_idx -
+				 page_diff + page_cnt) % page_cnt;
+	}
+
 	if (is_chain_u16(p_chain))
 		p_chain->u.chain16.prod_idx = (u16) prod_idx;
 	else
Signature · 1 line
2.19.1
author maintainer
#37 lore raw

PATCH 37/152 qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 46721c3d9e273aea880e9ff835b0e1271e1cd2fb ]

Make sure chain element is updated before ringing the doorbell.

---
 drivers/net/ethernet/qlogic/qed/qed_ll2.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ethernet/qlogic/qed/qed_ll2.c +4 -0
index 2fa1c050a14b4..92cd8abeb41d7 100644
@@ -1592,6 +1592,10 @@ static void qed_ll2_post_rx_buffer_notify_fw(struct qed_hwfn *p_hwfn,
 	cq_prod = qed_chain_get_prod_idx(&p_rx->rcq_chain);
 	rx_prod.bd_prod = cpu_to_le16(bd_prod);
 	rx_prod.cqe_prod = cpu_to_le16(cq_prod);
+
+	/* Make sure chain element is updated before ringing the doorbell */
+	dma_wmb();
+
 	DIRECT_REG_WR(p_rx->set_prod_addr, *((u32 *)&rx_prod));
 }
 
Signature · 1 line
2.19.1
author maintainer
#38 lore raw

PATCH 38/152 net: hns: Fix use after free identified by SLUB debug

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit bb989501abcafa0de5f18b0ec0ec459b5b817908 ]

When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug:

[134.189505] Unable to handle kernel paging request at virtual address
		006b6b6b6b6b6b6b
[134.197553] Mem abort info:
[134.200381]   ESR = 0x96000004
[134.203487]   Exception class = DABT (current EL), IL = 32 bits
[134.209497]   SET = 0, FnV = 0
[134.212596]   EA = 0, S1PTW = 0
[134.215777] Data abort info:
[134.218701]   ISV = 0, ISS = 0x00000004
[134.222596]   CM = 0, WnR = 0
[134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges
[134.232851] Internal error: Oops: 96000004 [#1] SMP
[134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G
		OE     4.19.5-1.2.34.aarch64 #1
[134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018
[134.255181] pstate: 20000005 (nzCv daif -PAN -UAO)
[134.260044] pc : hns_ae_put_handle+0x38/0x60
[134.264372] lr : hns_ae_put_handle+0x24/0x60
[134.268700] sp : ffff00001be93c50
[134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040
[134.277442] x27: 0000000000000000 x26: 0000000000000000
[134.282830] x25: 0000000056000000 x24: 0000000000000015
[134.288284] x23: ffff0000096fe098 x22: ffff000001050070
[134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098
[134.303287] x19: ffff80afb75ec098 x18: 0000000000000000
[134.312945] x17: 0000000000000000 x16: 0000000000000000
[134.322517] x15: 0000000000000002 x14: 0000000000000000
[134.332030] x13: dead000000000100 x12: ffff7e02bea3c988
[134.341487] x11: ffff80affbee9e68 x10: 0000000000000000
[134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000
[134.360569] x7 : dead000000000100 x6 : ffff000009579748
[134.370059] x5 : 0000000000210d00 x4 : 0000000000000000
[134.379550] x3 : 0000000000000001 x2 : 0000000000000000
[134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000
[134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd)
[134.408498] Call trace:
[134.414611]  hns_ae_put_handle+0x38/0x60
[134.422208]  hnae_put_handle+0xd4/0x108
[134.429563]  hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv]
[134.438342]  platform_drv_remove+0x2c/0x70
[134.445958]  device_release_driver_internal+0x174/0x208
[134.454810]  driver_detach+0x70/0xd8
[134.461913]  bus_remove_driver+0x64/0xe8
[134.469396]  driver_unregister+0x34/0x60
[134.476822]  platform_driver_unregister+0x20/0x30
[134.485130]  hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv]
[134.494634]  __arm64_sys_delete_module+0x238/0x290

struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic.

This patch frees vf_cb after hnae_handle used.

---
 drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c +2 -4
index ad1779fc410e6..a78bfafd212c8 100644
@@ -147,12 +147,10 @@ static void hns_ae_put_handle(struct hnae_handle *handle)
 	struct hnae_vf_cb *vf_cb = hns_ae_get_vf_cb(handle);
 	int i;
 
-	vf_cb->mac_cb	 = NULL;
-
-	kfree(vf_cb);
-
 	for (i = 0; i < handle->q_num; i++)
 		hns_ae_get_ring_pair(handle->qs[i])->used_by_vf = 0;
+
+	kfree(vf_cb);
 }
 
 static int hns_ae_wait_flow_down(struct hnae_handle *handle)
Signature · 1 line
2.19.1
author maintainer
#39 lore raw

PATCH 39/152 bpf: Fix [::] -> [::1] rewrite in sys_sendmsg

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e8e36984080b55ac5e57bdb09a5b570f2fc8e963 ]

sys_sendmsg has supported unspecified destination IPv6 (wildcard) for unconnected UDP sockets since 876c7f41. When [::] is passed by user as destination, sys_sendmsg rewrites it with [::1] to be consistent with BSD (see "BSD'ism" comment in the code).

This didn't work when cgroup-bpf was enabled though since the rewrite [::] -> [::1] happened before passing control to cgroup-bpf block where fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that might or might not be changed by BPF program). That way if user passed [::] as dst IPv6 it was first rewritten with [::1] by original code from 876c7f41, but then rewritten back with [::] by cgroup-bpf block.

It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present (CONFIG_CGROUP_BPF=y was enough).

The fix is to apply BSD'ism after cgroup-bpf block so that [::] is replaced with [::1] no matter where it came from: passed by user to sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.

Fixes 1cedee13d25a ("bpf: Hooks for sys_sendmsg")
---
 net/ipv6/udp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/ipv6/udp.c +4 -4
index 76ba2f34ef6b1..cab8b2b647f96 100644
@@ -1322,10 +1322,7 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 	ipc6.opt = opt;
 
 	fl6.flowi6_proto = sk->sk_protocol;
-	if (!ipv6_addr_any(daddr))
-		fl6.daddr = *daddr;
-	else
-		fl6.daddr.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */
+	fl6.daddr = *daddr;
 	if (ipv6_addr_any(&fl6.saddr) && !ipv6_addr_any(&np->saddr))
 		fl6.saddr = np->saddr;
 	fl6.fl6_sport = inet->inet_sport;
@@ -1353,6 +1350,9 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len)
 		}
 	}
 
+	if (ipv6_addr_any(&fl6.daddr))
+		fl6.daddr.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */
+
 	final_p = fl6_update_dst(&fl6, opt, &final);
 	if (final_p)
 		connected = false;
Signature · 1 line
2.19.1
author maintainer
#40 lore raw

PATCH 40/152 selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 976b4f3a4646fbf0d189caca25f91f82e4be4b5a ]

Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to rewrite destination IPv6 = [::] with [::1] (BSD'ism).

Two test cases are added:

1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program doesn't touch it.

2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program rewrites it with [::].

In both cases [::1] is used by sys_sendmsg code eventually and datagram is sent successfully for unconnected UDP socket.

Example of relevant output:
Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS] Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]

---
 tools/testing/selftests/bpf/test_sock_addr.c | 53 ++++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/test_sock_addr.c +50 -3
index aeeb76a54d633..e38f1cb7089d3 100644
@@ -44,6 +44,7 @@
 #define SERV6_V4MAPPED_IP	"::ffff:192.168.0.4"
 #define SRC6_IP			"::1"
 #define SRC6_REWRITE_IP		"::6"
+#define WILDCARD6_IP		"::"
 #define SERV6_PORT		6060
 #define SERV6_REWRITE_PORT	6666
 
@@ -85,12 +86,14 @@ static int bind4_prog_load(const struct sock_addr_test *test);
 static int bind6_prog_load(const struct sock_addr_test *test);
 static int connect4_prog_load(const struct sock_addr_test *test);
 static int connect6_prog_load(const struct sock_addr_test *test);
+static int sendmsg_allow_prog_load(const struct sock_addr_test *test);
 static int sendmsg_deny_prog_load(const struct sock_addr_test *test);
 static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test);
 static int sendmsg4_rw_c_prog_load(const struct sock_addr_test *test);
 static int sendmsg6_rw_asm_prog_load(const struct sock_addr_test *test);
 static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test);
 static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test);
+static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test);
 
 static struct sock_addr_test tests[] = {
 	/* bind */
@@ -462,6 +465,34 @@ static struct sock_addr_test tests[] = {
 		SRC6_REWRITE_IP,
 		SYSCALL_ENOTSUPP,
 	},
+	{
+		"sendmsg6: set dst IP = [::] (BSD'ism)",
+		sendmsg6_rw_wildcard_prog_load,
+		BPF_CGROUP_UDP6_SENDMSG,
+		BPF_CGROUP_UDP6_SENDMSG,
+		AF_INET6,
+		SOCK_DGRAM,
+		SERV6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_REWRITE_PORT,
+		SRC6_REWRITE_IP,
+		SUCCESS,
+	},
+	{
+		"sendmsg6: preserve dst IP = [::] (BSD'ism)",
+		sendmsg_allow_prog_load,
+		BPF_CGROUP_UDP6_SENDMSG,
+		BPF_CGROUP_UDP6_SENDMSG,
+		AF_INET6,
+		SOCK_DGRAM,
+		WILDCARD6_IP,
+		SERV6_PORT,
+		SERV6_REWRITE_IP,
+		SERV6_PORT,
+		SRC6_IP,
+		SUCCESS,
+	},
 	{
 		"sendmsg6: deny call",
 		sendmsg_deny_prog_load,
@@ -714,16 +745,27 @@ static int connect6_prog_load(const struct sock_addr_test *test)
 	return load_path(test, CONNECT6_PROG_PATH);
 }
 
-static int sendmsg_deny_prog_load(const struct sock_addr_test *test)
+static int sendmsg_ret_only_prog_load(const struct sock_addr_test *test,
+				      int32_t rc)
 {
 	struct bpf_insn insns[] = {
-		/* return 0 */
-		BPF_MOV64_IMM(BPF_REG_0, 0),
+		/* return rc */
+		BPF_MOV64_IMM(BPF_REG_0, rc),
 		BPF_EXIT_INSN(),
 	};
 	return load_insns(test, insns, sizeof(insns) / sizeof(struct bpf_insn));
 }
 
+static int sendmsg_allow_prog_load(const struct sock_addr_test *test)
+{
+	return sendmsg_ret_only_prog_load(test, /*rc*/ 1);
+}
+
+static int sendmsg_deny_prog_load(const struct sock_addr_test *test)
+{
+	return sendmsg_ret_only_prog_load(test, /*rc*/ 0);
+}
+
 static int sendmsg4_rw_asm_prog_load(const struct sock_addr_test *test)
 {
 	struct sockaddr_in dst4_rw_addr;
@@ -844,6 +886,11 @@ static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test)
 	return sendmsg6_rw_dst_asm_prog_load(test, SERV6_V4MAPPED_IP);
 }
 
+static int sendmsg6_rw_wildcard_prog_load(const struct sock_addr_test *test)
+{
+	return sendmsg6_rw_dst_asm_prog_load(test, WILDCARD6_IP);
+}
+
 static int sendmsg6_rw_c_prog_load(const struct sock_addr_test *test)
 {
 	return load_path(test, SENDMSG6_PROG_PATH);
Signature · 1 line
2.19.1
author maintainer
#41 lore raw

PATCH 41/152 watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3aa8b8bbc142eeaac89891de584535ceb7fce405 ]

These files need
#include <linux/mod_devicetable.h>
to compile correctly.

Fixes ac3167257b9f ("headers: separate linux/mod_devicetable.h from linux/platform_device.h")
---
 drivers/watchdog/mt7621_wdt.c | 1 +
 drivers/watchdog/rt2880_wdt.c | 1 +
 2 files changed, 2 insertions(+)
drivers/watchdog/mt7621_wdt.c +1 -0
index 5c4a764717c4d..81208cd3f4ecb 100644
@@ -17,6 +17,7 @@
 #include <linux/watchdog.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/mach-ralink/ralink_regs.h>
 
drivers/watchdog/rt2880_wdt.c +1 -0
index 98967f0a7d10e..db7c57d82cfdc 100644
@@ -18,6 +18,7 @@
 #include <linux/watchdog.h>
 #include <linux/moduleparam.h>
 #include <linux/platform_device.h>
+#include <linux/mod_devicetable.h>
 
 #include <asm/mach-ralink/ralink_regs.h>
 
Signature · 1 line
2.19.1
author maintainer
#42 lore raw

PATCH 42/152 net/mlx4: Get rid of page operation after dma_alloc_coherent

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f65e192af35058e5c82da9e90871b472d24912bc ]

This patch solves a crash at the time of mlx4 driver unload or system shutdown. The crash occurs because dma_alloc_coherent() returns one value in mlx4_alloc_icm_coherent(), but a different value is passed to dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because when allocated, that pointer is passed to sg_set_buf() to record it, then when freed it is re-calculated by calling lowmem_page_address(sg_page()) which returns a different value. Solve this by recording the value that dma_alloc_coherent() returns, and passing this to dma_free_coherent().

This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get rid of page operation after dma_alloc_coherent").

Based-on-code-from: Christoph Hellwig <[email protected]>

---
 drivers/net/ethernet/mellanox/mlx4/icm.c | 92 ++++++++++++++----------
 drivers/net/ethernet/mellanox/mlx4/icm.h | 22 +++++-
 2 files changed, 75 insertions(+), 39 deletions(-)
drivers/net/ethernet/mellanox/mlx4/icm.c +56 -36
index 7262c6310650e..288fca826a55c 100644
@@ -57,12 +57,12 @@ static void mlx4_free_icm_pages(struct mlx4_dev *dev, struct mlx4_icm_chunk *chu
 	int i;
 
 	if (chunk->nsg > 0)
-		pci_unmap_sg(dev->persist->pdev, chunk->mem, chunk->npages,
+		pci_unmap_sg(dev->persist->pdev, chunk->sg, chunk->npages,
 			     PCI_DMA_BIDIRECTIONAL);
 
 	for (i = 0; i < chunk->npages; ++i)
-		__free_pages(sg_page(&chunk->mem[i]),
-			     get_order(chunk->mem[i].length));
+		__free_pages(sg_page(&chunk->sg[i]),
+			     get_order(chunk->sg[i].length));
 }
 
 static void mlx4_free_icm_coherent(struct mlx4_dev *dev, struct mlx4_icm_chunk *chunk)
@@ -71,9 +71,9 @@ static void mlx4_free_icm_coherent(struct mlx4_dev *dev, struct mlx4_icm_chunk *
 
 	for (i = 0; i < chunk->npages; ++i)
 		dma_free_coherent(&dev->persist->pdev->dev,
-				  chunk->mem[i].length,
-				  lowmem_page_address(sg_page(&chunk->mem[i])),
-				  sg_dma_address(&chunk->mem[i]));
+				  chunk->buf[i].size,
+				  chunk->buf[i].addr,
+				  chunk->buf[i].dma_addr);
 }
 
 void mlx4_free_icm(struct mlx4_dev *dev, struct mlx4_icm *icm, int coherent)
@@ -111,22 +111,21 @@ static int mlx4_alloc_icm_pages(struct scatterlist *mem, int order,
 	return 0;
 }
 
-static int mlx4_alloc_icm_coherent(struct device *dev, struct scatterlist *mem,
-				    int order, gfp_t gfp_mask)
+static int mlx4_alloc_icm_coherent(struct device *dev, struct mlx4_icm_buf *buf,
+				   int order, gfp_t gfp_mask)
 {
-	void *buf = dma_alloc_coherent(dev, PAGE_SIZE << order,
-				       &sg_dma_address(mem), gfp_mask);
-	if (!buf)
+	buf->addr = dma_alloc_coherent(dev, PAGE_SIZE << order,
+				       &buf->dma_addr, gfp_mask);
+	if (!buf->addr)
 		return -ENOMEM;
 
-	if (offset_in_page(buf)) {
-		dma_free_coherent(dev, PAGE_SIZE << order,
-				  buf, sg_dma_address(mem));
+	if (offset_in_page(buf->addr)) {
+		dma_free_coherent(dev, PAGE_SIZE << order, buf->addr,
+				  buf->dma_addr);
 		return -ENOMEM;
 	}
 
-	sg_set_buf(mem, buf, PAGE_SIZE << order);
-	sg_dma_len(mem) = PAGE_SIZE << order;
+	buf->size = PAGE_SIZE << order;
 	return 0;
 }
 
@@ -159,21 +158,21 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 
 	while (npages > 0) {
 		if (!chunk) {
-			chunk = kmalloc_node(sizeof(*chunk),
+			chunk = kzalloc_node(sizeof(*chunk),
 					     gfp_mask & ~(__GFP_HIGHMEM |
 							  __GFP_NOWARN),
 					     dev->numa_node);
 			if (!chunk) {
-				chunk = kmalloc(sizeof(*chunk),
+				chunk = kzalloc(sizeof(*chunk),
 						gfp_mask & ~(__GFP_HIGHMEM |
 							     __GFP_NOWARN));
 				if (!chunk)
 					goto fail;
 			}
+			chunk->coherent = coherent;
 
-			sg_init_table(chunk->mem, MLX4_ICM_CHUNK_LEN);
-			chunk->npages = 0;
-			chunk->nsg    = 0;
+			if (!coherent)
+				sg_init_table(chunk->sg, MLX4_ICM_CHUNK_LEN);
 			list_add_tail(&chunk->list, &icm->chunk_list);
 		}
 
@@ -186,10 +185,10 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 
 		if (coherent)
 			ret = mlx4_alloc_icm_coherent(&dev->persist->pdev->dev,
-						      &chunk->mem[chunk->npages],
-						      cur_order, mask);
+						&chunk->buf[chunk->npages],
+						cur_order, mask);
 		else
-			ret = mlx4_alloc_icm_pages(&chunk->mem[chunk->npages],
+			ret = mlx4_alloc_icm_pages(&chunk->sg[chunk->npages],
 						   cur_order, mask,
 						   dev->numa_node);
 
@@ -205,7 +204,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 		if (coherent)
 			++chunk->nsg;
 		else if (chunk->npages == MLX4_ICM_CHUNK_LEN) {
-			chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->mem,
+			chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->sg,
 						chunk->npages,
 						PCI_DMA_BIDIRECTIONAL);
 
@@ -220,7 +219,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,
 	}
 
 	if (!coherent && chunk) {
-		chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->mem,
+		chunk->nsg = pci_map_sg(dev->persist->pdev, chunk->sg,
 					chunk->npages,
 					PCI_DMA_BIDIRECTIONAL);
 
@@ -320,7 +319,7 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj,
 	u64 idx;
 	struct mlx4_icm_chunk *chunk;
 	struct mlx4_icm *icm;
-	struct page *page = NULL;
+	void *addr = NULL;
 
 	if (!table->lowmem)
 		return NULL;
@@ -336,28 +335,49 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj,
 
 	list_for_each_entry(chunk, &icm->chunk_list, list) {
 		for (i = 0; i < chunk->npages; ++i) {
+			dma_addr_t dma_addr;
+			size_t len;
+
+			if (table->coherent) {
+				len = chunk->buf[i].size;
+				dma_addr = chunk->buf[i].dma_addr;
+				addr = chunk->buf[i].addr;
+			} else {
+				struct page *page;
+
+				len = sg_dma_len(&chunk->sg[i]);
+				dma_addr = sg_dma_address(&chunk->sg[i]);
+
+				/* XXX: we should never do this for highmem
+				 * allocation.  This function either needs
+				 * to be split, or the kernel virtual address
+				 * return needs to be made optional.
+				 */
+				page = sg_page(&chunk->sg[i]);
+				addr = lowmem_page_address(page);
+			}
+
 			if (dma_handle && dma_offset >= 0) {
-				if (sg_dma_len(&chunk->mem[i]) > dma_offset)
-					*dma_handle = sg_dma_address(&chunk->mem[i]) +
-						dma_offset;
-				dma_offset -= sg_dma_len(&chunk->mem[i]);
+				if (len > dma_offset)
+					*dma_handle = dma_addr + dma_offset;
+				dma_offset -= len;
 			}
+
 			/*
 			 * DMA mapping can merge pages but not split them,
 			 * so if we found the page, dma_handle has already
 			 * been assigned to.
 			 */
-			if (chunk->mem[i].length > offset) {
-				page = sg_page(&chunk->mem[i]);
+			if (len > offset)
 				goto out;
-			}
-			offset -= chunk->mem[i].length;
+			offset -= len;
 		}
 	}
 
+	addr = NULL;
 out:
 	mutex_unlock(&table->mutex);
-	return page ? lowmem_page_address(page) + offset : NULL;
+	return addr ? addr + offset : NULL;
 }
 
 int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table,
drivers/net/ethernet/mellanox/mlx4/icm.h +19 -3
index c9169a490557c..d199874b1c074 100644
@@ -47,11 +47,21 @@ enum {
 	MLX4_ICM_PAGE_SIZE	= 1 << MLX4_ICM_PAGE_SHIFT,
 };
 
+struct mlx4_icm_buf {
+	void			*addr;
+	size_t			size;
+	dma_addr_t		dma_addr;
+};
+
 struct mlx4_icm_chunk {
 	struct list_head	list;
 	int			npages;
 	int			nsg;
-	struct scatterlist	mem[MLX4_ICM_CHUNK_LEN];
+	bool			coherent;
+	union {
+		struct scatterlist	sg[MLX4_ICM_CHUNK_LEN];
+		struct mlx4_icm_buf	buf[MLX4_ICM_CHUNK_LEN];
+	};
 };
 
 struct mlx4_icm {
@@ -114,12 +124,18 @@ static inline void mlx4_icm_next(struct mlx4_icm_iter *iter)
 
 static inline dma_addr_t mlx4_icm_addr(struct mlx4_icm_iter *iter)
 {
-	return sg_dma_address(&iter->chunk->mem[iter->page_idx]);
+	if (iter->chunk->coherent)
+		return iter->chunk->buf[iter->page_idx].dma_addr;
+	else
+		return sg_dma_address(&iter->chunk->sg[iter->page_idx]);
 }
 
 static inline unsigned long mlx4_icm_size(struct mlx4_icm_iter *iter)
 {
-	return sg_dma_len(&iter->chunk->mem[iter->page_idx]);
+	if (iter->chunk->coherent)
+		return iter->chunk->buf[iter->page_idx].size;
+	else
+		return sg_dma_len(&iter->chunk->sg[iter->page_idx]);
 }
 
 int mlx4_MAP_ICM_AUX(struct mlx4_dev *dev, struct mlx4_icm *icm);
Signature · 1 line
2.19.1
author maintainer
#43 lore raw

PATCH 43/152 MIPS: ath79: Enable OF serial ports in the default config

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]

CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box.

---
 arch/mips/configs/ath79_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/mips/configs/ath79_defconfig +1 -0
index 951c4231bdb85..4c47b3fd958b6 100644
@@ -71,6 +71,7 @@ CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_NR_UARTS=1
 CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AR933X=y
 CONFIG_SERIAL_AR933X_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
Signature · 1 line
2.19.1
author maintainer
#44 lore raw

PATCH 44/152 xprtrdma: Double free in rpcrdma_sendctxs_create()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6e17f58c486d9554341f70aa5b63b8fbed07b3fa ]

The clean up is handled by the caller, rpcrdma_buffer_create(), so this call to rpcrdma_sendctxs_destroy() leads to a double free.

Fixes ae72950abf99 ("xprtrdma: Add data structure to manage RDMA Send arguments")
---
 net/sunrpc/xprtrdma/verbs.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)
net/sunrpc/xprtrdma/verbs.c +1 -5
index 956a5ea47b58e..3d6bf790cf1fb 100644
@@ -872,7 +872,7 @@ static int rpcrdma_sendctxs_create(struct rpcrdma_xprt *r_xprt)
 	for (i = 0; i <= buf->rb_sc_last; i++) {
 		sc = rpcrdma_sendctx_create(&r_xprt->rx_ia);
 		if (!sc)
-			goto out_destroy;
+			return -ENOMEM;
 
 		sc->sc_xprt = r_xprt;
 		buf->rb_sc_ctxs[i] = sc;
@@ -880,10 +880,6 @@ static int rpcrdma_sendctxs_create(struct rpcrdma_xprt *r_xprt)
 	buf->rb_flags = 0;
 
 	return 0;
-
-out_destroy:
-	rpcrdma_sendctxs_destroy(buf);
-	return -ENOMEM;
 }
 
 /* The sendctx queue is not guaranteed to have a size that is a
Signature · 1 line
2.19.1
author maintainer
#45 lore raw

PATCH 45/152 mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ff0db43cd6c530ff944773ccf48ece55d32d0c22 ]

When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert(). In case of C-TCAM HW insertion error, the opposite action should take place.
Add error handling case in which the C-TCAM region entry is removed, by calling cregion->ops->entry_remove().

Fixes a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM")
---
 .../net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c   | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c +9 -1
index e3c6fe8b1d406..1dcf152b28138 100644
@@ -75,7 +75,15 @@ mlxsw_sp_acl_ctcam_region_entry_insert(struct mlxsw_sp *mlxsw_sp,
 	act_set = mlxsw_afa_block_first_set(rulei->act_block);
 	mlxsw_reg_ptce2_flex_action_set_memcpy_to(ptce2_pl, act_set);
 
-	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptce2), ptce2_pl);
+	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ptce2), ptce2_pl);
+	if (err)
+		goto err_ptce2_write;
+
+	return 0;
+
+err_ptce2_write:
+	cregion->ops->entry_remove(cregion, centry);
+	return err;
 }
 
 static void
Signature · 1 line
2.19.1
author maintainer
#46 lore raw

PATCH 46/152 selftests: forwarding: Add a test for VLAN deletion

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4fabf3bf93a194c7fa5288da3e0af37e4b943cf3 ]

Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is not affected.

---
 .../selftests/net/forwarding/bridge_vlan_aware.sh | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +14 -1
index d8313d0438b74..04c6431b2bd8c 100755
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding"
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion"
 NUM_NETIFS=4
 CHECK_TC="yes"
 source lib.sh
@@ -96,6 +96,19 @@ flooding()
 	flood_test $swp2 $h1 $h2
 }
 
+vlan_deletion()
+{
+	# Test that the deletion of a VLAN on a bridge port does not affect
+	# the PVID VLAN
+	log_info "Add and delete a VLAN on bridge port $swp1"
+
+	bridge vlan add vid 10 dev $swp1
+	bridge vlan del vid 10 dev $swp1
+
+	ping_ipv4
+	ping_ipv6
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.19.1
author maintainer
#47 lore raw

PATCH 47/152 netfilter: nf_tables: fix leaking object reference count

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b91d9036883793122cf6575ca4dfbfbdd201a83d ]

There is no code that decreases the reference count of stateful objects in error path of the nft_add_set_elem(). this causes a leak of reference count of stateful objects.

Test commands:
$nft add table ip filter
$nft add counter ip filter c1
$nft add map ip filter m1 { type ipv4_addr : counter \;} $nft add element ip filter m1 { 1 : c1 }
$nft add element ip filter m1 { 1 : c1 }
$nft delete element ip filter m1 { 1 }
$nft delete counter ip filter c1

Result:
Error: Could not process rule: Device or resource busy delete counter ip filter c1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^

At the second 'nft add element ip filter m1 { 1 : c1 }', the reference count of the 'c1' is increased then it tries to insert into the 'm1'. but the 'm1' already has same element so it returns -EEXIST.
But it doesn't decrease the reference count of the 'c1' in the error path. Due to a leak of the reference count of the 'c1', the 'c1' can't be removed by 'nft delete counter ip filter c1'.

Fixes 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements")
---
 net/netfilter/nf_tables_api.c | 2 ++
 1 file changed, 2 insertions(+)
net/netfilter/nf_tables_api.c +2 -0
index ed9af46720e14..38654730230b2 100644
@@ -4439,6 +4439,8 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set,
 err5:
 	kfree(trans);
 err4:
+	if (obj)
+		obj->use--;
 	kfree(elem.priv);
 err3:
 	if (nla[NFTA_SET_ELEM_DATA] != NULL)
Signature · 1 line
2.19.1
author maintainer
#48 lore raw

PATCH 48/152 scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 72b4a0465f995175a2e22cf4a636bf781f1f28a7 ]

The return code should be check while qla4xxx_copy_from_fwddb_param fails.

---
 drivers/scsi/qla4xxx/ql4_os.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/qla4xxx/ql4_os.c +2 -0
index 0e13349dce570..575445c761b48 100644
@@ -7237,6 +7237,8 @@ static int qla4xxx_sysfs_ddb_tgt_create(struct scsi_qla_host *ha,
 
 	rc = qla4xxx_copy_from_fwddb_param(fnode_sess, fnode_conn,
 					   fw_ddb_entry);
+	if (rc)
+		goto free_sess;
 
 	ql4_printk(KERN_INFO, ha, "%s: sysfs entry %s created\n",
 		   __func__, fnode_sess->dev.kobj.name);
Signature · 1 line
2.19.1
author maintainer
#49 lore raw

PATCH 49/152 scsi: isci: initialize shost fully before calling scsi_add_host()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]

scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur.

However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed.

The bug was noticed after the struct request size was reduced by commit 9d037ad707ed ("block: remove req->timeout_list")

Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at:

  RIP: 0010:t10_pi_complete+0x77/0x1c0
  Call Trace:
    <IRQ>
    sd_done+0xf5/0x340
    scsi_finish_command+0xc3/0x120
    blk_done_softirq+0x83/0xb0
    __do_softirq+0xa1/0x2e6
    irq_exit+0xbc/0xd0
    call_function_single_interrupt+0xf/0x20
    </IRQ>

sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete().

To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard().

Fixes 3d2d75254915 ("[SCSI] isci: T10 DIF support")
Cc Intel SCU Linux support <[email protected]>
Cc Artur Paszkiewicz <[email protected]>
Cc "James E.J. Bottomley" <[email protected]>
Cc "Martin K. Petersen" <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Jens Axboe <[email protected]>
Cc Jeff Moyer <[email protected]>
---
 drivers/scsi/isci/init.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/scsi/isci/init.c +7 -7
index 08c7b1e25fe48..dde84f7443136 100644
@@ -588,6 +588,13 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id)
 	shost->max_lun = ~0;
 	shost->max_cmd_len = MAX_COMMAND_SIZE;
 
+	/* turn on DIF support */
+	scsi_host_set_prot(shost,
+			   SHOST_DIF_TYPE1_PROTECTION |
+			   SHOST_DIF_TYPE2_PROTECTION |
+			   SHOST_DIF_TYPE3_PROTECTION);
+	scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
+
 	err = scsi_add_host(shost, &pdev->dev);
 	if (err)
 		goto err_shost;
@@ -675,13 +682,6 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			goto err_host_alloc;
 		}
 		pci_info->hosts[i] = h;
-
-		/* turn on DIF support */
-		scsi_host_set_prot(to_shost(h),
-				   SHOST_DIF_TYPE1_PROTECTION |
-				   SHOST_DIF_TYPE2_PROTECTION |
-				   SHOST_DIF_TYPE3_PROTECTION);
-		scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC);
 	}
 
 	err = isci_setup_interrupts(pdev);
Signature · 1 line
2.19.1
author maintainer
#50 lore raw

PATCH 50/152 include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3e2ffd655cc6a694608d997738989ff5572a8266 ]

Since commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro from compiler-gcc - instead it gets the version in include/linux/compiler.h. Unfortunately that version doesn't actually prevent compiler from optimizing out the variable.

Fix up by moving the macro out from compiler-gcc.h to compiler.h. Compilers without incline asm support will keep working since it's protected by an ifdef.

Also fix up comments to match reality since we are no longer overriding any macros.

Build-tested with gcc and clang.

Fixes 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive")
Cc Eli Friedman <[email protected]>
Cc Joe Perches <[email protected]>
Cc Linus Torvalds <[email protected]>
---
 include/linux/compiler-clang.h | 5 ++---
 include/linux/compiler-gcc.h   | 4 ----
 include/linux/compiler-intel.h | 4 +---
 include/linux/compiler.h       | 4 +++-
 4 files changed, 6 insertions(+), 11 deletions(-)
include/linux/compiler-clang.h +2 -3
index b1ce500fe8b3d..d756f2318efe0 100644
@@ -3,9 +3,8 @@
 #error "Please don't include <linux/compiler-clang.h> directly, include <linux/compiler.h> instead."
 #endif
 
-/* Some compiler specific definitions are overwritten here
- * for Clang compiler
- */
+/* Compiler specific definitions for Clang compiler */
+
 #define uninitialized_var(x) x = *(&(x))
 
 /* same as gcc, this was present in clang-2.6 so we can assume it works
include/linux/compiler-gcc.h +0 -4
index 0242f6eec4eaf..a8ff0ca0c3213 100644
@@ -58,10 +58,6 @@
 	(typeof(ptr)) (__ptr + (off));					\
 })
 
-/* Make the optimizer believe the variable can be manipulated arbitrarily. */
-#define OPTIMIZER_HIDE_VAR(var)						\
-	__asm__ ("" : "=r" (var) : "0" (var))
-
 /*
  * A trick to suppress uninitialized variable warning without generating any
  * code
include/linux/compiler-intel.h +1 -3
index 4c7f9befa9f6c..f1fc60f103176 100644
@@ -5,9 +5,7 @@
 
 #ifdef __ECC
 
-/* Some compiler specific definitions are overwritten here
- * for Intel ECC compiler
- */
+/* Compiler specific definitions for Intel ECC compiler */
 
 #include <asm/intrinsics.h>
 
include/linux/compiler.h +3 -1
index 681d866efb1eb..269d376f5a119 100644
@@ -158,7 +158,9 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,
 #endif
 
 #ifndef OPTIMIZER_HIDE_VAR
-#define OPTIMIZER_HIDE_VAR(var) barrier()
+/* Make the optimizer believe the variable can be manipulated arbitrarily. */
+#define OPTIMIZER_HIDE_VAR(var)						\
+	__asm__ ("" : "=r" (var) : "0" (var))
 #endif
 
 /* Not-quite-unique ID. */
Signature · 1 line
2.19.1
author maintainer
#51 lore raw

PATCH 51/152 MIPS: jazz: fix 64bit build

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ]

64bit JAZZ builds failed with

linux-next/arch/mips/jazz/jazzdma.c: In function vdma_init:
/linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration

    of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`?
    [-Werror=implicit-function-declaration]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
                                ^~~~~~~~~
                                CKSEG1ADDR
  /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from
    integer of different size [-Werror=int-to-pointer-cast]
    pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
            ^
  In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0,
                   from /linux-next/include/linux/compiler.h:248,
                   from /linux-next/include/linux/kernel.h:10,
                   from /linux-next/arch/mips/jazz/jazzdma.c:11:
  /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from
    pointer to integer of different size [-Werror=pointer-to-int-cast]
   #define _ACAST32_  (_ATYPE_)(_ATYPE32_) /* widen if necessary */
                               ^
  /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in
    expansion of macro `_ACAST32_`
   #define CPHYSADDR(a)  ((_ACAST32_(a)) & 0x1fffffff)
                           ^~~~~~~~~
  /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of
    macro `CPHYSADDR`
    r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));

Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this.

---
 arch/mips/jazz/jazzdma.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
arch/mips/jazz/jazzdma.c +3 -2
index d31bc2f012088..fb2b6d0b77c36 100644
@@ -74,14 +74,15 @@ static int __init vdma_init(void)
 						    get_order(VDMA_PGTBL_SIZE));
 	BUG_ON(!pgtbl);
 	dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
-	pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
+	pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
 
 	/*
 	 * Clear the R4030 translation table
 	 */
 	vdma_pgtbl_init();
 
-	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+			  CPHYSADDR((unsigned long)pgtbl));
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
 	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
 
Signature · 1 line
2.19.1
author maintainer
#52 lore raw

PATCH 52/152 netfilter: nft_flow_offload: Fix reverse route lookup

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a799aea0988ea0d1b1f263e996fdad2f6133c680 ]

Using the following example:

	client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server

The first reply packet (ie. syn+ack) uses an incorrect destination address for the reverse route lookup since it uses:

	daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;

which is 2.2.2.7 in the scenario that is described above, while this should be:

	daddr = ct->tuplehash[dir].tuple.src.u3.ip;

that is 10.0.0.7.

---
 net/netfilter/nft_flow_offload.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/netfilter/nft_flow_offload.c +2 -2
index 5fd4c57c79cc9..e0c04851a3493 100644
@@ -29,10 +29,10 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,
 	memset(&fl, 0, sizeof(fl));
 	switch (nft_pf(pkt)) {
 	case NFPROTO_IPV4:
-		fl.u.ip4.daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;
+		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
 		break;
 	case NFPROTO_IPV6:
-		fl.u.ip6.daddr = ct->tuplehash[!dir].tuple.dst.u3.in6;
+		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
 		break;
 	}
 
Signature · 1 line
2.19.1
author maintainer
#53 lore raw

PATCH 53/152 bpf: correctly set initial window on active Fast Open sender

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 31aa6503a15ba00182ea6dbbf51afb63bf9e851d ]

The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally.

Fixes fc7478103c84 ("bpf: Adds support for setting initial cwnd")
---
 net/core/filter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/filter.c +1 -1
index 8c2411fb25090..3400c7abda135 100644
@@ -4001,7 +4001,7 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 			/* Only some options are supported */
 			switch (optname) {
 			case TCP_BPF_IW:
-				if (val <= 0 || tp->data_segs_out > 0)
+				if (val <= 0 || tp->data_segs_out > tp->syn_data)
 					ret = -EINVAL;
 				else
 					tp->snd_cwnd = val;
Signature · 1 line
2.19.1
author maintainer
#54 lore raw

PATCH 54/152 pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 9f51c05dc41a6d69423e3d03d18eb7ab22f9ec19 ]

The problem is that we call this with a spin lock held. The call tree is:
pvcalls_front_accept() holds bedata->socket_lock.

    -> create_active()
        -> __get_free_pages() uses GFP_KERNEL

The create_active() function is only called from pvcalls_front_accept() with a spin_lock held, The allocation is not allowed to sleep and GFP_KERNEL is not sufficient.

This issue was detected by using the Coccinelle software.

v2: Add a function doing the allocations which is called
outside the lock and passing the allocated data to create_active().

v3: Use the matching deallocators i.e., free_page()
and free_pages(), respectively.

v4: It would be better to pre-populate map (struct sock_mapping),
rather than introducing one more new struct.

v5: Since allocating the data outside of this call it should also
be freed outside, when create_active() fails.
Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and use GFP_KERNEL instead.

v6: Drop the superfluous calls.

---
 drivers/xen/pvcalls-front.c | 81 +++++++++++++++++++++++++++----------
 1 file changed, 59 insertions(+), 22 deletions(-)
drivers/xen/pvcalls-front.c +59 -22
index 01588582ae663..6357160d466ab 100644
@@ -341,6 +341,39 @@ int pvcalls_front_socket(struct socket *sock)
 	return ret;
 }
 
+static void free_active_ring(struct sock_mapping *map)
+{
+	free_pages((unsigned long)map->active.data.in,
+			map->active.ring->ring_order);
+	free_page((unsigned long)map->active.ring);
+}
+
+static int alloc_active_ring(struct sock_mapping *map)
+{
+	void *bytes;
+
+	map->active.ring = (struct pvcalls_data_intf *)
+		get_zeroed_page(GFP_KERNEL);
+	if (!map->active.ring)
+		goto out;
+
+	map->active.ring->ring_order = PVCALLS_RING_ORDER;
+	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
+					PVCALLS_RING_ORDER);
+	if (!bytes)
+		goto out;
+
+	map->active.data.in = bytes;
+	map->active.data.out = bytes +
+		XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
+
+	return 0;
+
+out:
+	free_active_ring(map);
+	return -ENOMEM;
+}
+
 static int create_active(struct sock_mapping *map, int *evtchn)
 {
 	void *bytes;
@@ -349,15 +382,7 @@ static int create_active(struct sock_mapping *map, int *evtchn)
 	*evtchn = -1;
 	init_waitqueue_head(&map->active.inflight_conn_req);
 
-	map->active.ring = (struct pvcalls_data_intf *)
-		__get_free_page(GFP_KERNEL | __GFP_ZERO);
-	if (map->active.ring == NULL)
-		goto out_error;
-	map->active.ring->ring_order = PVCALLS_RING_ORDER;
-	bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
-					PVCALLS_RING_ORDER);
-	if (bytes == NULL)
-		goto out_error;
+	bytes = map->active.data.in;
 	for (i = 0; i < (1 << PVCALLS_RING_ORDER); i++)
 		map->active.ring->ref[i] = gnttab_grant_foreign_access(
 			pvcalls_front_dev->otherend_id,
@@ -367,10 +392,6 @@ static int create_active(struct sock_mapping *map, int *evtchn)
 		pvcalls_front_dev->otherend_id,
 		pfn_to_gfn(virt_to_pfn((void *)map->active.ring)), 0);
 
-	map->active.data.in = bytes;
-	map->active.data.out = bytes +
-		XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
-
 	ret = xenbus_alloc_evtchn(pvcalls_front_dev, evtchn);
 	if (ret)
 		goto out_error;
@@ -391,8 +412,6 @@ static int create_active(struct sock_mapping *map, int *evtchn)
 out_error:
 	if (*evtchn >= 0)
 		xenbus_free_evtchn(pvcalls_front_dev, *evtchn);
-	free_pages((unsigned long)map->active.data.in, PVCALLS_RING_ORDER);
-	free_page((unsigned long)map->active.ring);
 	return ret;
 }
 
@@ -412,17 +431,24 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,
 		return PTR_ERR(map);
 
 	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
+	ret = alloc_active_ring(map);
+	if (ret < 0) {
+		pvcalls_exit_sock(sock);
+		return ret;
+	}
 
 	spin_lock(&bedata->socket_lock);
 	ret = get_request(bedata, &req_id);
 	if (ret < 0) {
 		spin_unlock(&bedata->socket_lock);
+		free_active_ring(map);
 		pvcalls_exit_sock(sock);
 		return ret;
 	}
 	ret = create_active(map, &evtchn);
 	if (ret < 0) {
 		spin_unlock(&bedata->socket_lock);
+		free_active_ring(map);
 		pvcalls_exit_sock(sock);
 		return ret;
 	}
@@ -784,25 +810,36 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags)
 		}
 	}
 
-	spin_lock(&bedata->socket_lock);
-	ret = get_request(bedata, &req_id);
-	if (ret < 0) {
+	map2 = kzalloc(sizeof(*map2), GFP_KERNEL);
+	if (map2 == NULL) {
 		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
 			  (void *)&map->passive.flags);
-		spin_unlock(&bedata->socket_lock);
+		pvcalls_exit_sock(sock);
+		return -ENOMEM;
+	}
+	ret = alloc_active_ring(map2);
+	if (ret < 0) {
+		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
+				(void *)&map->passive.flags);
+		kfree(map2);
 		pvcalls_exit_sock(sock);
 		return ret;
 	}
-	map2 = kzalloc(sizeof(*map2), GFP_ATOMIC);
-	if (map2 == NULL) {
+	spin_lock(&bedata->socket_lock);
+	ret = get_request(bedata, &req_id);
+	if (ret < 0) {
 		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
 			  (void *)&map->passive.flags);
 		spin_unlock(&bedata->socket_lock);
+		free_active_ring(map2);
+		kfree(map2);
 		pvcalls_exit_sock(sock);
-		return -ENOMEM;
+		return ret;
 	}
+
 	ret = create_active(map2, &evtchn);
 	if (ret < 0) {
+		free_active_ring(map2);
 		kfree(map2);
 		clear_bit(PVCALLS_FLAG_ACCEPT_INFLIGHT,
 			  (void *)&map->passive.flags);
Signature · 9 lines
2.19.1




_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
author maintainer
#55 lore raw

PATCH 55/152 bpf: fix panic in stack_map_get_build_id() on i386 and arm32

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit beaf3d1901f4ea46fbd5c9d857227d99751de469 ]

As Naresh reported, test_stacktrace_build_id() causes panic on i386 and arm32 systems. This is caused by page_address() returns NULL in certain cases.

This patch fixes this error by using kmap_atomic/kunmap_atomic instead of page_address.

Fixes 615755a77b24 (" bpf: extend stackmap to save binary_build_id+offset instead of address")
---
 kernel/bpf/stackmap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/bpf/stackmap.c +2 -1
index 8061a439ef18c..e50ef5bca4213 100644
@@ -260,7 +260,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma,
 		return -EFAULT;	/* page not mapped */
 
 	ret = -EINVAL;
-	page_addr = page_address(page);
+	page_addr = kmap_atomic(page);
 	ehdr = (Elf32_Ehdr *)page_addr;
 
 	/* compare magic x7f "ELF" */
@@ -276,6 +276,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma,
 	else if (ehdr->e_ident[EI_CLASS] == ELFCLASS64)
 		ret = stack_map_get_build_id_64(page_addr, build_id);
 out:
+	kunmap_atomic(page_addr);
 	put_page(page);
 	return ret;
 }
Signature · 1 line
2.19.1
author maintainer
#56 lore raw

PATCH 56/152 netfilter: nft_flow_offload: fix interaction with vrf slave device

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 10f4e765879e514e1ce7f52ed26603047af196e2 ]

In the forward chain, the iif is changed from slave device to master vrf device. Thus, flow offload does not find a match on the lower slave device.

This patch uses the cached route, ie. dst->dev, to update the iif and oif fields in the flow entry.

After this patch, the following example works fine:

 # ip addr add dev eth0 1.1.1.1/24
 # ip addr add dev eth1 10.0.0.1/24
 # ip link add user1 type vrf table 1
 # ip l set user1 up
 # ip l set dev eth0 master user1
 # ip l set dev eth1 master user1
 # nft add table firewall
 # nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; }
 # nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; }
 # nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1
 # nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1
---
 include/net/netfilter/nf_flow_table.h | 1 -
 net/netfilter/nf_flow_table_core.c    | 5 +++--
 net/netfilter/nft_flow_offload.c      | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)
include/net/netfilter/nf_flow_table.h +0 -1
index 0e355f4a3d763..0a3de10c6dece 100644
@@ -84,7 +84,6 @@ struct flow_offload {
 struct nf_flow_route {
 	struct {
 		struct dst_entry	*dst;
-		int			ifindex;
 	} tuple[FLOW_OFFLOAD_DIR_MAX];
 };
 
net/netfilter/nf_flow_table_core.c +3 -2
index d8125616edc79..e1537ace2b90c 100644
@@ -28,6 +28,7 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct,
 {
 	struct flow_offload_tuple *ft = &flow->tuplehash[dir].tuple;
 	struct nf_conntrack_tuple *ctt = &ct->tuplehash[dir].tuple;
+	struct dst_entry *other_dst = route->tuple[!dir].dst;
 	struct dst_entry *dst = route->tuple[dir].dst;
 
 	ft->dir = dir;
@@ -50,8 +51,8 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct,
 	ft->src_port = ctt->src.u.tcp.port;
 	ft->dst_port = ctt->dst.u.tcp.port;
 
-	ft->iifidx = route->tuple[dir].ifindex;
-	ft->oifidx = route->tuple[!dir].ifindex;
+	ft->iifidx = other_dst->dev->ifindex;
+	ft->oifidx = dst->dev->ifindex;
 	ft->dst_cache = dst;
 }
 
net/netfilter/nft_flow_offload.c +2 -2
index e0c04851a3493..4d7cf943fff2c 100644
@@ -30,9 +30,11 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,
 	switch (nft_pf(pkt)) {
 	case NFPROTO_IPV4:
 		fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
+		fl.u.ip4.flowi4_oif = nft_in(pkt)->ifindex;
 		break;
 	case NFPROTO_IPV6:
 		fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
+		fl.u.ip6.flowi6_oif = nft_in(pkt)->ifindex;
 		break;
 	}
 
@@ -41,9 +43,7 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,
 		return -ENOENT;
 
 	route->tuple[dir].dst		= this_dst;
-	route->tuple[dir].ifindex	= nft_in(pkt)->ifindex;
 	route->tuple[!dir].dst		= other_dst;
-	route->tuple[!dir].ifindex	= nft_out(pkt)->ifindex;
 
 	return 0;
 }
Signature · 1 line
2.19.1
author maintainer
#57 lore raw

PATCH 57/152 RDMA/mthca: Clear QP objects during their allocation

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 9d9f59b4204bc41896c866b3e5856e5b416aa199 ]

As part of audit process to update drivers to use rdma_restrack_add() ensure that QP objects is cleared before access. Such change fixes the crash observed with uninitialized non zero sgid attr accessed by ib_destroy_qp().

CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64
Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib]
RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core]
RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699
RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20
RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf
R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400
R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000
FS:  0000000000000000(0000) GS:ffff8d1bf7ac0000(0000)
knlGS:0000000000000000
Trace:
 ib_destroy_qp+0xc9/0x240 [ib_core]
 ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib]
 process_one_work+0x1a1/0x3a0
 worker_thread+0x30/0x380
 ? pwq_unbound_release_workfn+0xd0/0xd0
 kthread+0x112/0x130
 ? kthread_create_worker_on_cpu+0x70/0x70
 ret_from_fork+0x22/0x40
Fixes 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp")
---
 drivers/infiniband/hw/mthca/mthca_provider.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mthca/mthca_provider.c +2 -2
index 0d3473b4596e1..21f4239022c7a 100644
@@ -533,7 +533,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd,
 	{
 		struct mthca_ucontext *context;
 
-		qp = kmalloc(sizeof *qp, GFP_KERNEL);
+		qp = kzalloc(sizeof(*qp), GFP_KERNEL);
 		if (!qp)
 			return ERR_PTR(-ENOMEM);
 
@@ -599,7 +599,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd,
 		if (pd->uobject)
 			return ERR_PTR(-EINVAL);
 
-		qp = kmalloc(sizeof (struct mthca_sqp), GFP_KERNEL);
+		qp = kzalloc(sizeof(struct mthca_sqp), GFP_KERNEL);
 		if (!qp)
 			return ERR_PTR(-ENOMEM);
 
Signature · 1 line
2.19.1
author maintainer
#58 lore raw

PATCH 58/152 powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit fb0bdec51a4901b7dd088de0a1e365e1b9f5cd21 ]

Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") moved the loading of r6 earlier in the code. As some functions are called inbetween, r6 needs to be loaded again with the address of swapper_pg_dir in order to set PTE pointers for the Abatron BDI.

Fixes 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference")
---
 arch/powerpc/kernel/head_8xx.S | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/powerpc/kernel/head_8xx.S +2 -1
index 81d4574d1f377..9fd2ff28b8ff2 100644
@@ -919,11 +919,12 @@ start_here:
 
 	/* set up the PTE pointers for the Abatron bdiGDB.
 	*/
-	tovirt(r6,r6)
 	lis	r5, abatron_pteptrs@h
 	ori	r5, r5, abatron_pteptrs@l
 	stw	r5, 0xf0(0)	/* Must match your Abatron config file */
 	tophys(r5,r5)
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
 	stw	r6, 0(r5)
 
 /* Now turn on the MMU for real! */
Signature · 1 line
2.19.1
author maintainer
#59 lore raw

PATCH 59/152 acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0919871ac37fdcf46c7657da0f1742efe096b399 ]

Possible race accessing memdev structures after dropping the mutex. Dan Williams says this could race against another thread that is doing:

 # echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind
Fixes 23222f8f8dce ("acpi, nfit: Add function to look up nvdimm...")
---
 drivers/acpi/nfit/core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/acpi/nfit/core.c +4 -2
index ea59c01ce8db0..f530d35412428 100644
@@ -719,6 +719,7 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)
 	struct acpi_nfit_memory_map *memdev;
 	struct acpi_nfit_desc *acpi_desc;
 	struct nfit_mem *nfit_mem;
+	u16 physical_id;
 
 	mutex_lock(&acpi_desc_lock);
 	list_for_each_entry(acpi_desc, &acpi_descs, list) {
@@ -726,10 +727,11 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)
 		list_for_each_entry(nfit_mem, &acpi_desc->dimms, list) {
 			memdev = __to_nfit_memdev(nfit_mem);
 			if (memdev->device_handle == device_handle) {
+				*flags = memdev->flags;
+				physical_id = memdev->physical_id;
 				mutex_unlock(&acpi_desc->init_mutex);
 				mutex_unlock(&acpi_desc_lock);
-				*flags = memdev->flags;
-				return memdev->physical_id;
+				return physical_id;
 			}
 		}
 		mutex_unlock(&acpi_desc->init_mutex);
Signature · 1 line
2.19.1
author maintainer
#60 lore raw

PATCH 60/152 net: stmmac: Fix PCI module removal leak

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 6dea7e1881fd86b80da64e476ac398008daed857 ]

Since commit b7d0f08e9129, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac.

Fix this by manually unmapping regions on remove callback.

Changes from v1:
- Fix build error

Cc Joao Pinto <[email protected]>
Cc David S. Miller <[email protected]>
Cc Giuseppe Cavallaro <[email protected]>
Cc Alexandre Torgue <[email protected]>
Fixes b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups")
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +10 -0
index c54a50dbd5ac2..d819e8eaba122 100644
@@ -299,7 +299,17 @@ static int stmmac_pci_probe(struct pci_dev *pdev,
  */
 static void stmmac_pci_remove(struct pci_dev *pdev)
 {
+	int i;
+
 	stmmac_dvr_remove(&pdev->dev);
+
+	for (i = 0; i <= PCI_STD_RESOURCE_END; i++) {
+		if (pci_resource_len(pdev, i) == 0)
+			continue;
+		pcim_iounmap_regions(pdev, BIT(i));
+		break;
+	}
+
 	pci_disable_device(pdev);
 }
 
Signature · 1 line
2.19.1
author maintainer
#61 lore raw

PATCH 61/152 net: stmmac: dwxgmac2: Only clear interrupts that are active

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit fcc509eb10ff4794641e6ad3082118287a750d0a ]

In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts.

Cc Joao Pinto <[email protected]>
Cc David S. Miller <[email protected]>
Cc Giuseppe Cavallaro <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +3 -3
index 20909036e0028..1c39305274440 100644
@@ -260,6 +260,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
 				  struct stmmac_extra_stats *x, u32 chan)
 {
 	u32 intr_status = readl(ioaddr + XGMAC_DMA_CH_STATUS(chan));
+	u32 intr_en = readl(ioaddr + XGMAC_DMA_CH_INT_EN(chan));
 	int ret = 0;
 
 	/* ABNORMAL interrupts */
@@ -279,8 +280,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
 		x->normal_irq_n++;
 
 		if (likely(intr_status & XGMAC_RI)) {
-			u32 value = readl(ioaddr + XGMAC_DMA_CH_INT_EN(chan));
-			if (likely(value & XGMAC_RIE)) {
+			if (likely(intr_en & XGMAC_RIE)) {
 				x->rx_normal_irq_n++;
 				ret |= handle_rx;
 			}
@@ -292,7 +292,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
 	}
 
 	/* Clear interrupts */
-	writel(~0x0, ioaddr + XGMAC_DMA_CH_STATUS(chan));
+	writel(intr_en & intr_status, ioaddr + XGMAC_DMA_CH_STATUS(chan));
 
 	return ret;
 }
Signature · 1 line
2.19.1
author maintainer
#62 lore raw

PATCH 62/152 net: stmmac: Check if CBS is supported before configuring

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0650d4017f4d2eee67230a02285a7ae5204240c2 ]

Check if CBS is currently supported before trying to configure it in HW.

Cc Joao Pinto <[email protected]>
Cc David S. Miller <[email protected]>
Cc Giuseppe Cavallaro <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +2 -0
index 531294f4978bc..58ea18af9813a 100644
@@ -301,6 +301,8 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
 	/* Queue 0 is not AVB capable */
 	if (queue <= 0 || queue >= tx_queues_count)
 		return -EINVAL;
+	if (!priv->dma_cap.av)
+		return -EOPNOTSUPP;
 	if (priv->speed != SPEED_100 && priv->speed != SPEED_1000)
 		return -EOPNOTSUPP;
 
Signature · 1 line
2.19.1
author maintainer
#63 lore raw

PATCH 63/152 net: stmmac: Fix the logic of checking if RX Watchdog must be enabled

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 3b5094665e273c4a2a99f7f5f16977c0f1e19095 ]

RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not.

Fix this by checking earlier if user wants Watchdog disabled or not.

Cc Joao Pinto <[email protected]>
Cc David S. Miller <[email protected]>
Cc Giuseppe Cavallaro <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 24 +++++++++----------
 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +12 -12
index 2103b865726ac..24ae244c2ee33 100644
@@ -4191,6 +4191,18 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 			return ret;
 	}
 
+	/* Rx Watchdog is available in the COREs newer than the 3.40.
+	 * In some case, for example on bugged HW this feature
+	 * has to be disable and this can be done by passing the
+	 * riwt_off field from the platform.
+	 */
+	if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
+	    (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
+		priv->use_riwt = 1;
+		dev_info(priv->device,
+			 "Enable RX Mitigation via HW Watchdog Timer\n");
+	}
+
 	return 0;
 }
 
@@ -4323,18 +4335,6 @@ int stmmac_dvr_probe(struct device *device,
 	if (flow_ctrl)
 		priv->flow_ctrl = FLOW_AUTO;	/* RX/TX pause on */
 
-	/* Rx Watchdog is available in the COREs newer than the 3.40.
-	 * In some case, for example on bugged HW this feature
-	 * has to be disable and this can be done by passing the
-	 * riwt_off field from the platform.
-	 */
-	if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
-	    (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
-		priv->use_riwt = 1;
-		dev_info(priv->device,
-			 "Enable RX Mitigation via HW Watchdog Timer\n");
-	}
-
 	/* Setup channels NAPI */
 	maxq = max(priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
 
Signature · 1 line
2.19.1
author maintainer
#64 lore raw

PATCH 64/152 net: stmmac: Prevent RX starvation in stmmac_napi_poll()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit fa0be0a43f101888ac677dba31b590963eafeaa1 ]

Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget.

This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low.

Let's give always the same budget for RX and TX clean.

While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status.

Cc Joao Pinto <[email protected]>
Cc David S. Miller <[email protected]>
Cc Giuseppe Cavallaro <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 27 ++++++++++---------
 1 file changed, 14 insertions(+), 13 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +14 -13
index 24ae244c2ee33..123b74e25ed81 100644
@@ -3522,27 +3522,28 @@ static int stmmac_napi_poll(struct napi_struct *napi, int budget)
 	struct stmmac_channel *ch =
 		container_of(napi, struct stmmac_channel, napi);
 	struct stmmac_priv *priv = ch->priv_data;
-	int work_done = 0, work_rem = budget;
+	int work_done, rx_done = 0, tx_done = 0;
 	u32 chan = ch->index;
 
 	priv->xstats.napi_poll++;
 
-	if (ch->has_tx) {
-		int done = stmmac_tx_clean(priv, work_rem, chan);
+	if (ch->has_tx)
+		tx_done = stmmac_tx_clean(priv, budget, chan);
+	if (ch->has_rx)
+		rx_done = stmmac_rx(priv, budget, chan);
 
-		work_done += done;
-		work_rem -= done;
-	}
-
-	if (ch->has_rx) {
-		int done = stmmac_rx(priv, work_rem, chan);
+	work_done = max(rx_done, tx_done);
+	work_done = min(work_done, budget);
 
-		work_done += done;
-		work_rem -= done;
-	}
+	if (work_done < budget && napi_complete_done(napi, work_done)) {
+		int stat;
 
-	if (work_done < budget && napi_complete_done(napi, work_done))
 		stmmac_enable_dma_irq(priv, priv->ioaddr, chan);
+		stat = stmmac_dma_interrupt_status(priv, priv->ioaddr,
+						   &priv->xstats, chan);
+		if (stat && napi_reschedule(napi))
+			stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
+	}
 
 	return work_done;
 }
Signature · 1 line
2.19.1
author maintainer
#65 lore raw

PATCH 65/152 isdn: i4l: isdn_tty: Fix some concurrency double-free bugs

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2ff33d6637393fe9348357285931811b76e1402f ]

The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed.

isdn_tty_tiocmset
isdn_tty_modem_hup

    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

isdn_tty_set_termios
isdn_tty_modem_hup

    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

Thus, some concurrency double-free bugs may occur.

These possible bugs are found by a static tool written by myself and my manual code review.

To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios().

---
 drivers/isdn/i4l/isdn_tty.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/isdn/i4l/isdn_tty.c +5 -1
index b730037a0e2d3..9cff667b2d245 100644
@@ -1456,15 +1456,19 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
 	modem_info *info = (modem_info *) tty->driver_data;
 
+	mutex_lock(&modem_info_mutex);
 	if (!old_termios)
 		isdn_tty_change_speed(info);
 	else {
 		if (tty->termios.c_cflag == old_termios->c_cflag &&
 		    tty->termios.c_ispeed == old_termios->c_ispeed &&
-		    tty->termios.c_ospeed == old_termios->c_ospeed)
+		    tty->termios.c_ospeed == old_termios->c_ospeed) {
+			mutex_unlock(&modem_info_mutex);
 			return;
+		}
 		isdn_tty_change_speed(info);
 	}
+	mutex_unlock(&modem_info_mutex);
 }
 
 /*
Signature · 1 line
2.19.1
author maintainer
#66 lore raw

PATCH 66/152 scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit a94a2572b97744d3a35a1996df0e5cf6b2461a4a ]

Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached.

This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue.

---
 drivers/target/target_core_user.c | 88 +++++++++++++++++++++----------
 1 file changed, 61 insertions(+), 27 deletions(-)
drivers/target/target_core_user.c +61 -27
index 9cd404acdb82b..ac7620120491b 100644
@@ -148,7 +148,7 @@ struct tcmu_dev {
 	size_t ring_size;
 
 	struct mutex cmdr_lock;
-	struct list_head cmdr_queue;
+	struct list_head qfull_queue;
 
 	uint32_t dbi_max;
 	uint32_t dbi_thresh;
@@ -159,6 +159,7 @@ struct tcmu_dev {
 
 	struct timer_list cmd_timer;
 	unsigned int cmd_time_out;
+	struct list_head inflight_queue;
 
 	struct timer_list qfull_timer;
 	int qfull_time_out;
@@ -179,7 +180,7 @@ struct tcmu_dev {
 struct tcmu_cmd {
 	struct se_cmd *se_cmd;
 	struct tcmu_dev *tcmu_dev;
-	struct list_head cmdr_queue_entry;
+	struct list_head queue_entry;
 
 	uint16_t cmd_id;
 
@@ -192,6 +193,7 @@ struct tcmu_cmd {
 	unsigned long deadline;
 
 #define TCMU_CMD_BIT_EXPIRED 0
+#define TCMU_CMD_BIT_INFLIGHT 1
 	unsigned long flags;
 };
 /*
@@ -586,7 +588,7 @@ static struct tcmu_cmd *tcmu_alloc_cmd(struct se_cmd *se_cmd)
 	if (!tcmu_cmd)
 		return NULL;
 
-	INIT_LIST_HEAD(&tcmu_cmd->cmdr_queue_entry);
+	INIT_LIST_HEAD(&tcmu_cmd->queue_entry);
 	tcmu_cmd->se_cmd = se_cmd;
 	tcmu_cmd->tcmu_dev = udev;
 
@@ -915,11 +917,13 @@ static int tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo,
 		return 0;
 
 	tcmu_cmd->deadline = round_jiffies_up(jiffies + msecs_to_jiffies(tmo));
-	mod_timer(timer, tcmu_cmd->deadline);
+	if (!timer_pending(timer))
+		mod_timer(timer, tcmu_cmd->deadline);
+
 	return 0;
 }
 
-static int add_to_cmdr_queue(struct tcmu_cmd *tcmu_cmd)
+static int add_to_qfull_queue(struct tcmu_cmd *tcmu_cmd)
 {
 	struct tcmu_dev *udev = tcmu_cmd->tcmu_dev;
 	unsigned int tmo;
@@ -942,7 +946,7 @@ static int add_to_cmdr_queue(struct tcmu_cmd *tcmu_cmd)
 	if (ret)
 		return ret;
 
-	list_add_tail(&tcmu_cmd->cmdr_queue_entry, &udev->cmdr_queue);
+	list_add_tail(&tcmu_cmd->queue_entry, &udev->qfull_queue);
 	pr_debug("adding cmd %u on dev %s to ring space wait queue\n",
 		 tcmu_cmd->cmd_id, udev->name);
 	return 0;
@@ -999,7 +1003,7 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err)
 	base_command_size = tcmu_cmd_get_base_cmd_size(tcmu_cmd->dbi_cnt);
 	command_size = tcmu_cmd_get_cmd_size(tcmu_cmd, base_command_size);
 
-	if (!list_empty(&udev->cmdr_queue))
+	if (!list_empty(&udev->qfull_queue))
 		goto queue;
 
 	mb = udev->mb_addr;
@@ -1096,13 +1100,16 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err)
 	UPDATE_HEAD(mb->cmd_head, command_size, udev->cmdr_size);
 	tcmu_flush_dcache_range(mb, sizeof(*mb));
 
+	list_add_tail(&tcmu_cmd->queue_entry, &udev->inflight_queue);
+	set_bit(TCMU_CMD_BIT_INFLIGHT, &tcmu_cmd->flags);
+
 	/* TODO: only if FLUSH and FUA? */
 	uio_event_notify(&udev->uio_info);
 
 	return 0;
 
 queue:
-	if (add_to_cmdr_queue(tcmu_cmd)) {
+	if (add_to_qfull_queue(tcmu_cmd)) {
 		*scsi_err = TCM_OUT_OF_RESOURCES;
 		return -1;
 	}
@@ -1145,6 +1152,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
 	if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags))
 		goto out;
 
+	list_del_init(&cmd->queue_entry);
+
 	tcmu_cmd_reset_dbi_cur(cmd);
 
 	if (entry->hdr.uflags & TCMU_UFLAG_UNKNOWN_OP) {
@@ -1194,9 +1203,29 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *
 	tcmu_free_cmd(cmd);
 }
 
+static void tcmu_set_next_deadline(struct list_head *queue,
+				   struct timer_list *timer)
+{
+	struct tcmu_cmd *tcmu_cmd, *tmp_cmd;
+	unsigned long deadline = 0;
+
+	list_for_each_entry_safe(tcmu_cmd, tmp_cmd, queue, queue_entry) {
+		if (!time_after(jiffies, tcmu_cmd->deadline)) {
+			deadline = tcmu_cmd->deadline;
+			break;
+		}
+	}
+
+	if (deadline)
+		mod_timer(timer, deadline);
+	else
+		del_timer(timer);
+}
+
 static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 {
 	struct tcmu_mailbox *mb;
+	struct tcmu_cmd *cmd;
 	int handled = 0;
 
 	if (test_bit(TCMU_DEV_BIT_BROKEN, &udev->flags)) {
@@ -1210,7 +1239,6 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 	while (udev->cmdr_last_cleaned != READ_ONCE(mb->cmd_tail)) {
 
 		struct tcmu_cmd_entry *entry = (void *) mb + CMDR_OFF + udev->cmdr_last_cleaned;
-		struct tcmu_cmd *cmd;
 
 		tcmu_flush_dcache_range(entry, sizeof(*entry));
 
@@ -1243,7 +1271,7 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 		/* no more pending commands */
 		del_timer(&udev->cmd_timer);
 
-		if (list_empty(&udev->cmdr_queue)) {
+		if (list_empty(&udev->qfull_queue)) {
 			/*
 			 * no more pending or waiting commands so try to
 			 * reclaim blocks if needed.
@@ -1252,6 +1280,8 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
 			    tcmu_global_max_blocks)
 				schedule_delayed_work(&tcmu_unmap_work, 0);
 		}
+	} else if (udev->cmd_time_out) {
+		tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer);
 	}
 
 	return handled;
@@ -1271,7 +1301,7 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data)
 	if (!time_after(jiffies, cmd->deadline))
 		return 0;
 
-	is_running = list_empty(&cmd->cmdr_queue_entry);
+	is_running = test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags);
 	se_cmd = cmd->se_cmd;
 
 	if (is_running) {
@@ -1288,12 +1318,11 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data)
 		 */
 		scsi_status = SAM_STAT_CHECK_CONDITION;
 	} else {
-		list_del_init(&cmd->cmdr_queue_entry);
-
 		idr_remove(&udev->commands, id);
 		tcmu_free_cmd(cmd);
 		scsi_status = SAM_STAT_TASK_SET_FULL;
 	}
+	list_del_init(&cmd->queue_entry);
 
 	pr_debug("Timing out cmd %u on dev %s that is %s.\n",
 		 id, udev->name, is_running ? "inflight" : "queued");
@@ -1372,7 +1401,8 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)
 
 	INIT_LIST_HEAD(&udev->node);
 	INIT_LIST_HEAD(&udev->timedout_entry);
-	INIT_LIST_HEAD(&udev->cmdr_queue);
+	INIT_LIST_HEAD(&udev->qfull_queue);
+	INIT_LIST_HEAD(&udev->inflight_queue);
 	idr_init(&udev->commands);
 
 	timer_setup(&udev->qfull_timer, tcmu_qfull_timedout, 0);
@@ -1383,7 +1413,7 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)
 	return &udev->se_dev;
 }
 
-static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)
+static bool run_qfull_queue(struct tcmu_dev *udev, bool fail)
 {
 	struct tcmu_cmd *tcmu_cmd, *tmp_cmd;
 	LIST_HEAD(cmds);
@@ -1391,15 +1421,15 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)
 	sense_reason_t scsi_ret;
 	int ret;
 
-	if (list_empty(&udev->cmdr_queue))
+	if (list_empty(&udev->qfull_queue))
 		return true;
 
 	pr_debug("running %s's cmdr queue forcefail %d\n", udev->name, fail);
 
-	list_splice_init(&udev->cmdr_queue, &cmds);
+	list_splice_init(&udev->qfull_queue, &cmds);
 
-	list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, cmdr_queue_entry) {
-		list_del_init(&tcmu_cmd->cmdr_queue_entry);
+	list_for_each_entry_safe(tcmu_cmd, tmp_cmd, &cmds, queue_entry) {
+		list_del_init(&tcmu_cmd->queue_entry);
 
 	        pr_debug("removing cmd %u on dev %s from queue\n",
 		         tcmu_cmd->cmd_id, udev->name);
@@ -1437,14 +1467,13 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)
 			 * cmd was requeued, so just put all cmds back in
 			 * the queue
 			 */
-			list_splice_tail(&cmds, &udev->cmdr_queue);
+			list_splice_tail(&cmds, &udev->qfull_queue);
 			drained = false;
-			goto done;
+			break;
 		}
 	}
-	if (list_empty(&udev->cmdr_queue))
-		del_timer(&udev->qfull_timer);
-done:
+
+	tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer);
 	return drained;
 }
 
@@ -1454,7 +1483,7 @@ static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on)
 
 	mutex_lock(&udev->cmdr_lock);
 	tcmu_handle_completions(udev);
-	run_cmdr_queue(udev, false);
+	run_qfull_queue(udev, false);
 	mutex_unlock(&udev->cmdr_lock);
 
 	return 0;
@@ -1982,7 +2011,7 @@ static void tcmu_block_dev(struct tcmu_dev *udev)
 	/* complete IO that has executed successfully */
 	tcmu_handle_completions(udev);
 	/* fail IO waiting to be queued */
-	run_cmdr_queue(udev, true);
+	run_qfull_queue(udev, true);
 
 unlock:
 	mutex_unlock(&udev->cmdr_lock);
@@ -1997,7 +2026,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 	mutex_lock(&udev->cmdr_lock);
 
 	idr_for_each_entry(&udev->commands, cmd, i) {
-		if (!list_empty(&cmd->cmdr_queue_entry))
+		if (!test_bit(TCMU_CMD_BIT_INFLIGHT, &cmd->flags))
 			continue;
 
 		pr_debug("removing cmd %u on dev %s from ring (is expired %d)\n",
@@ -2006,6 +2035,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)
 
 		idr_remove(&udev->commands, i);
 		if (!test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) {
+			list_del_init(&cmd->queue_entry);
 			if (err_level == 1) {
 				/*
 				 * Userspace was not able to start the
@@ -2666,6 +2696,10 @@ static void check_timedout_devices(void)
 
 		mutex_lock(&udev->cmdr_lock);
 		idr_for_each(&udev->commands, tcmu_check_expired_cmd, NULL);
+
+		tcmu_set_next_deadline(&udev->inflight_queue, &udev->cmd_timer);
+		tcmu_set_next_deadline(&udev->qfull_queue, &udev->qfull_timer);
+
 		mutex_unlock(&udev->cmdr_lock);
 
 		spin_lock_bh(&timed_out_udevs_lock);
Signature · 1 line
2.19.1
author maintainer
#67 lore raw

PATCH 67/152 scsi: ufs: Fix system suspend status

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit ce9e7bce43526626f7cffe2e657953997870197e ]

hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume.

According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned.

Simply fix this flag to correct host status logs.

---
 drivers/scsi/ufs/ufshcd.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/scsi/ufs/ufshcd.c +2 -0
index 12ddb5928a738..6e80dfe4fa979 100644
@@ -7768,6 +7768,8 @@ int ufshcd_system_resume(struct ufs_hba *hba)
 	trace_ufshcd_system_resume(dev_name(hba->dev), ret,
 		ktime_to_us(ktime_sub(ktime_get(), start)),
 		hba->curr_dev_pwr_mode, hba->uic_link_state);
+	if (!ret)
+		hba->is_sys_suspended = false;
 	return ret;
 }
 EXPORT_SYMBOL(ufshcd_system_resume);
Signature · 1 line
2.19.1
author maintainer
#68 lore raw

PATCH 68/152 scsi: qedi: Add ep_state for login completion on un-reachable targets

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 34a2ce887668db9dda4b56e6f155c49ac13f3e54 ]

When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets.

---
 drivers/scsi/qedi/qedi_iscsi.c | 3 +++
 drivers/scsi/qedi/qedi_iscsi.h | 1 +
 2 files changed, 4 insertions(+)
drivers/scsi/qedi/qedi_iscsi.c +3 -0
index 2f0a4f2c5ff80..d4821b9dea45d 100644
@@ -954,6 +954,7 @@ static int qedi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
 
 	qedi_ep = ep->dd_data;
 	if (qedi_ep->state == EP_STATE_IDLE ||
+	    qedi_ep->state == EP_STATE_OFLDCONN_NONE ||
 	    qedi_ep->state == EP_STATE_OFLDCONN_FAILED)
 		return -1;
 
@@ -1036,6 +1037,7 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)
 
 	switch (qedi_ep->state) {
 	case EP_STATE_OFLDCONN_START:
+	case EP_STATE_OFLDCONN_NONE:
 		goto ep_release_conn;
 	case EP_STATE_OFLDCONN_FAILED:
 			break;
@@ -1226,6 +1228,7 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data)
 
 	if (!is_valid_ether_addr(&path_data->mac_addr[0])) {
 		QEDI_NOTICE(&qedi->dbg_ctx, "dst mac NOT VALID\n");
+		qedi_ep->state = EP_STATE_OFLDCONN_NONE;
 		ret = -EIO;
 		goto set_path_exit;
 	}
drivers/scsi/qedi/qedi_iscsi.h +1 -0
index 11260776212fa..892d70d545537 100644
@@ -59,6 +59,7 @@ enum {
 	EP_STATE_OFLDCONN_FAILED        = 0x2000,
 	EP_STATE_CONNECT_FAILED         = 0x4000,
 	EP_STATE_DISCONN_TIMEDOUT       = 0x8000,
+	EP_STATE_OFLDCONN_NONE          = 0x10000,
 };
 
 struct qedi_conn;
Signature · 1 line
2.19.1
author maintainer
#69 lore raw

PATCH 69/152 scsi: ufs: Fix geometry descriptor size

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 9be9db9f78f52ef03ee90063730cb9d730e7032b ]

Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0.

[mkp: typo]

Fixes c720c091222e (scsi: ufs: sysfs: geometry descriptor)
---
 drivers/scsi/ufs/ufs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufs.h +1 -1
index 14e5bf7af0bb1..c3bcaaec0fc5c 100644
@@ -195,7 +195,7 @@ enum ufs_desc_def_size {
 	QUERY_DESC_CONFIGURATION_DEF_SIZE	= 0x90,
 	QUERY_DESC_UNIT_DEF_SIZE		= 0x23,
 	QUERY_DESC_INTERCONNECT_DEF_SIZE	= 0x06,
-	QUERY_DESC_GEOMETRY_DEF_SIZE		= 0x44,
+	QUERY_DESC_GEOMETRY_DEF_SIZE		= 0x48,
 	QUERY_DESC_POWER_DEF_SIZE		= 0x62,
 	QUERY_DESC_HEALTH_DEF_SIZE		= 0x25,
 };
Signature · 1 line
2.19.1
author maintainer
#70 lore raw

PATCH 70/152 scsi: cxgb4i: add wait_for_completion()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 9e8f1c79831424d30c0e3df068be7f4a244157c9 ]

In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion().

---
 drivers/scsi/cxgbi/cxgb3i/cxgb3i.c |  9 ++++-----
 drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 28 ++++++++++++++++++++--------
 drivers/scsi/cxgbi/libcxgbi.c      |  7 ++++---
 drivers/scsi/cxgbi/libcxgbi.h      |  5 +++--
 4 files changed, 31 insertions(+), 18 deletions(-)
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c +4 -5
index bf07735275a49..0fc382cb977bf 100644
@@ -1144,7 +1144,7 @@ static void ddp_clear_map(struct cxgbi_device *cdev, struct cxgbi_ppm *ppm,
 }
 
 static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,
-				       unsigned int tid, int pg_idx, bool reply)
+				unsigned int tid, int pg_idx)
 {
 	struct sk_buff *skb = alloc_wr(sizeof(struct cpl_set_tcb_field), 0,
 					GFP_KERNEL);
@@ -1160,7 +1160,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
-	req->reply = V_NO_REPLY(reply ? 0 : 1);
+	req->reply = V_NO_REPLY(1);
 	req->cpu_idx = 0;
 	req->word = htons(31);
 	req->mask = cpu_to_be64(0xF0000000);
@@ -1177,11 +1177,10 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,
  * @tid: connection id
  * @hcrc: header digest enabled
  * @dcrc: data digest enabled
- * @reply: request reply from h/w
  * set up the iscsi digest settings for a connection identified by tid
  */
 static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
-			     int hcrc, int dcrc, int reply)
+				 int hcrc, int dcrc)
 {
 	struct sk_buff *skb = alloc_wr(sizeof(struct cpl_set_tcb_field), 0,
 					GFP_KERNEL);
@@ -1197,7 +1196,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
-	req->reply = V_NO_REPLY(reply ? 0 : 1);
+	req->reply = V_NO_REPLY(1);
 	req->cpu_idx = 0;
 	req->word = htons(31);
 	req->mask = cpu_to_be64(0x0F000000);
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +20 -8
index 211da1d5a8699..689d6c813a50d 100644
@@ -1517,16 +1517,22 @@ static void do_set_tcb_rpl(struct cxgbi_device *cdev, struct sk_buff *skb)
 	struct cxgbi_sock *csk;
 
 	csk = lookup_tid(t, tid);
-	if (!csk)
+	if (!csk) {
 		pr_err("can't find conn. for tid %u.\n", tid);
+		return;
+	}
 
 	log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK,
 		"csk 0x%p,%u,%lx,%u, status 0x%x.\n",
 		csk, csk->state, csk->flags, csk->tid, rpl->status);
 
-	if (rpl->status != CPL_ERR_NONE)
+	if (rpl->status != CPL_ERR_NONE) {
 		pr_err("csk 0x%p,%u, SET_TCB_RPL status %u.\n",
 			csk, tid, rpl->status);
+		csk->err = -EINVAL;
+	}
+
+	complete(&csk->cmpl);
 
 	__kfree_skb(skb);
 }
@@ -1903,7 +1909,7 @@ static int ddp_set_map(struct cxgbi_ppm *ppm, struct cxgbi_sock *csk,
 }
 
 static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid,
-				int pg_idx, bool reply)
+				int pg_idx)
 {
 	struct sk_buff *skb;
 	struct cpl_set_tcb_field *req;
@@ -1919,7 +1925,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	INIT_TP_WR(req, csk->tid);
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, csk->tid));
-	req->reply_ctrl = htons(NO_REPLY_V(reply) | QUEUENO_V(csk->rss_qid));
+	req->reply_ctrl = htons(NO_REPLY_V(0) | QUEUENO_V(csk->rss_qid));
 	req->word_cookie = htons(0);
 	req->mask = cpu_to_be64(0x3 << 8);
 	req->val = cpu_to_be64(pg_idx << 8);
@@ -1928,12 +1934,15 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid,
 	log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK,
 		"csk 0x%p, tid 0x%x, pg_idx %u.\n", csk, csk->tid, pg_idx);
 
+	reinit_completion(&csk->cmpl);
 	cxgb4_ofld_send(csk->cdev->ports[csk->port_id], skb);
-	return 0;
+	wait_for_completion(&csk->cmpl);
+
+	return csk->err;
 }
 
 static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
-				 int hcrc, int dcrc, int reply)
+				 int hcrc, int dcrc)
 {
 	struct sk_buff *skb;
 	struct cpl_set_tcb_field *req;
@@ -1951,7 +1960,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
 	req = (struct cpl_set_tcb_field *)skb->head;
 	INIT_TP_WR(req, tid);
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
-	req->reply_ctrl = htons(NO_REPLY_V(reply) | QUEUENO_V(csk->rss_qid));
+	req->reply_ctrl = htons(NO_REPLY_V(0) | QUEUENO_V(csk->rss_qid));
 	req->word_cookie = htons(0);
 	req->mask = cpu_to_be64(0x3 << 4);
 	req->val = cpu_to_be64(((hcrc ? ULP_CRC_HEADER : 0) |
@@ -1961,8 +1970,11 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,
 	log_debug(1 << CXGBI_DBG_TOE | 1 << CXGBI_DBG_SOCK,
 		"csk 0x%p, tid 0x%x, crc %d,%d.\n", csk, csk->tid, hcrc, dcrc);
 
+	reinit_completion(&csk->cmpl);
 	cxgb4_ofld_send(csk->cdev->ports[csk->port_id], skb);
-	return 0;
+	wait_for_completion(&csk->cmpl);
+
+	return csk->err;
 }
 
 static struct cxgbi_ppm *cdev2ppm(struct cxgbi_device *cdev)
drivers/scsi/cxgbi/libcxgbi.c +4 -3
index 3f3af5e74a07d..f2c561ca731a3 100644
@@ -573,6 +573,7 @@ static struct cxgbi_sock *cxgbi_sock_create(struct cxgbi_device *cdev)
 	skb_queue_head_init(&csk->receive_queue);
 	skb_queue_head_init(&csk->write_queue);
 	timer_setup(&csk->retry_timer, NULL, 0);
+	init_completion(&csk->cmpl);
 	rwlock_init(&csk->callback_lock);
 	csk->cdev = cdev;
 	csk->flags = 0;
@@ -2252,14 +2253,14 @@ int cxgbi_set_conn_param(struct iscsi_cls_conn *cls_conn,
 		if (!err && conn->hdrdgst_en)
 			err = csk->cdev->csk_ddp_setup_digest(csk, csk->tid,
 							conn->hdrdgst_en,
-							conn->datadgst_en, 0);
+							conn->datadgst_en);
 		break;
 	case ISCSI_PARAM_DATADGST_EN:
 		err = iscsi_set_param(cls_conn, param, buf, buflen);
 		if (!err && conn->datadgst_en)
 			err = csk->cdev->csk_ddp_setup_digest(csk, csk->tid,
 							conn->hdrdgst_en,
-							conn->datadgst_en, 0);
+							conn->datadgst_en);
 		break;
 	case ISCSI_PARAM_MAX_R2T:
 		return iscsi_tcp_set_max_r2t(conn, buf);
@@ -2385,7 +2386,7 @@ int cxgbi_bind_conn(struct iscsi_cls_session *cls_session,
 
 	ppm = csk->cdev->cdev2ppm(csk->cdev);
 	err = csk->cdev->csk_ddp_setup_pgidx(csk, csk->tid,
-					     ppm->tformat.pgsz_idx_dflt, 0);
+					     ppm->tformat.pgsz_idx_dflt);
 	if (err < 0)
 		return err;
 
drivers/scsi/cxgbi/libcxgbi.h +3 -2
index dcb190e753434..3bf7414a75e5e 100644
@@ -146,6 +146,7 @@ struct cxgbi_sock {
 	struct sk_buff_head receive_queue;
 	struct sk_buff_head write_queue;
 	struct timer_list retry_timer;
+	struct completion cmpl;
 	int err;
 	rwlock_t callback_lock;
 	void *user_data;
@@ -487,9 +488,9 @@ struct cxgbi_device {
 				  struct cxgbi_ppm *,
 				  struct cxgbi_task_tag_info *);
 	int (*csk_ddp_setup_digest)(struct cxgbi_sock *,
-				unsigned int, int, int, int);
+				    unsigned int, int, int);
 	int (*csk_ddp_setup_pgidx)(struct cxgbi_sock *,
-				unsigned int, int, bool);
+				   unsigned int, int);
 
 	void (*csk_release_offload_resources)(struct cxgbi_sock *);
 	int (*csk_rx_pdu_ready)(struct cxgbi_sock *, struct sk_buff *);
Signature · 1 line
2.19.1
author maintainer
#71 lore raw

PATCH 71/152 netfilter: nft_flow_offload: fix checking method of conntrack helper

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 2314e879747e82896f51cce4488f6a00f3e1af7b ]

This patch uses nfct_help() to detect whether an established connection needs conntrack helper instead of using test_bit(IPS_HELPER_BIT, &ct->status).

The reason is that IPS_HELPER_BIT is only set when using explicit CT target.

However, in the case that a device enables conntrack helper via command "echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of IPS_HELPER_BIT will not present any change, and consequently it loses the checking ability in the context.

---
 net/netfilter/nft_flow_offload.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/netfilter/nft_flow_offload.c +4 -1
index 4d7cf943fff2c..436cc14cfc59b 100644
@@ -12,6 +12,7 @@
 #include <net/netfilter/nf_conntrack_core.h>
 #include <linux/netfilter/nf_conntrack_common.h>
 #include <net/netfilter/nf_flow_table.h>
+#include <net/netfilter/nf_conntrack_helper.h>
 
 struct nft_flow_offload {
 	struct nft_flowtable	*flowtable;
@@ -66,6 +67,7 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
 {
 	struct nft_flow_offload *priv = nft_expr_priv(expr);
 	struct nf_flowtable *flowtable = &priv->flowtable->data;
+	const struct nf_conn_help *help;
 	enum ip_conntrack_info ctinfo;
 	struct nf_flow_route route;
 	struct flow_offload *flow;
@@ -88,7 +90,8 @@ static void nft_flow_offload_eval(const struct nft_expr *expr,
 		goto out;
 	}
 
-	if (test_bit(IPS_HELPER_BIT, &ct->status))
+	help = nfct_help(ct);
+	if (help)
 		goto out;
 
 	if (ctinfo == IP_CT_NEW ||
Signature · 1 line
2.19.1
author maintainer
#72 lore raw

PATCH 72/152 always clear the X2APIC_ENABLE bit for PV guest

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 5268c8f39e0efef81af2aaed160272d9eb507beb ]

Commit e657fcc clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit.

---
 arch/x86/xen/enlighten_pv.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
arch/x86/xen/enlighten_pv.c +1 -4
index 52a7c3faee0cc..782f98b332f05 100644
@@ -899,10 +899,7 @@ static u64 xen_read_msr_safe(unsigned int msr, int *err)
 	val = native_read_msr_safe(msr, err);
 	switch (msr) {
 	case MSR_IA32_APICBASE:
-#ifdef CONFIG_X86_X2APIC
-		if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31))))
-#endif
-			val &= ~X2APIC_ENABLE;
+		val &= ~X2APIC_ENABLE;
 		break;
 	}
 	return val;
Signature · 1 line
2.19.1
author maintainer
#73 lore raw

PATCH 73/152 drm/meson: add missing of_node_put

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f672b93e4a0a4947d2e1103ed8780e01e13eadb6 ]

Add an of_node_put when the result of of_graph_get_remote_port_parent is not available.

An of_node_put is also needed when meson_probe_remote completes. This was present at the recursive call, but not in the call from meson_drv_probe.

The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e

    when != true e == NULL
    when != of_node_put(e)
    when != of_fwnode_handle(e)

(
return e;
|
*return ...;
)
// </smpl>

---
 drivers/gpu/drm/meson/meson_drv.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/meson/meson_drv.c +7 -2
index bf5f294f172fa..611ac340fb289 100644
@@ -368,8 +368,10 @@ static int meson_probe_remote(struct platform_device *pdev,
 		remote_node = of_graph_get_remote_port_parent(ep);
 		if (!remote_node ||
 		    remote_node == parent || /* Ignore parent endpoint */
-		    !of_device_is_available(remote_node))
+		    !of_device_is_available(remote_node)) {
+			of_node_put(remote_node);
 			continue;
+		}
 
 		count += meson_probe_remote(pdev, match, remote, remote_node);
 
@@ -388,10 +390,13 @@ static int meson_drv_probe(struct platform_device *pdev)
 
 	for_each_endpoint_of_node(np, ep) {
 		remote = of_graph_get_remote_port_parent(ep);
-		if (!remote || !of_device_is_available(remote))
+		if (!remote || !of_device_is_available(remote)) {
+			of_node_put(remote);
 			continue;
+		}
 
 		count += meson_probe_remote(pdev, &match, np, remote);
+		of_node_put(remote);
 	}
 
 	if (count && !match)
Signature · 1 line
2.19.1
author maintainer
#74 lore raw

PATCH 74/152 drm/amdkfd: Dont assign dGPUs to APU topology devices

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit bbdf514fe5648566b0754476cbcb92ac3422dde2 ]

dGPUs need their own topology devices. Don't assign them to APU topology devices with CPU cores.

---
 drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_topology.c +9 -3
index 80f5db4ef75fd..0805c423a5ce0 100644
@@ -1072,8 +1072,6 @@ static uint32_t kfd_generate_gpu_id(struct kfd_dev *gpu)
  *		the GPU device is not already present in the topology device
  *		list then return NULL. This means a new topology device has to
  *		be created for this GPU.
- * TODO: Rather than assiging @gpu to first topology device withtout
- *		gpu attached, it will better to have more stringent check.
  */
 static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu)
 {
@@ -1081,12 +1079,20 @@ static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu)
 	struct kfd_topology_device *out_dev = NULL;
 
 	down_write(&topology_lock);
-	list_for_each_entry(dev, &topology_device_list, list)
+	list_for_each_entry(dev, &topology_device_list, list) {
+		/* Discrete GPUs need their own topology device list
+		 * entries. Don't assign them to CPU/APU nodes.
+		 */
+		if (!gpu->device_info->needs_iommu_device &&
+		    dev->node_props.cpu_cores_count)
+			continue;
+
 		if (!dev->gpu && (dev->node_props.simd_count > 0)) {
 			dev->gpu = gpu;
 			out_dev = dev;
 			break;
 		}
+	}
 	up_write(&topology_lock);
 	return out_dev;
 }
Signature · 1 line
2.19.1
author maintainer
#75 lore raw

PATCH 75/152 drm/amd/display: fix PME notification not working in RV desktop

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 20300db4aec5ba5edf6f0ad6f7111a51fbea7e10 ]

[Why]
PPLIB not receive the PME when unplug.

---
 .../gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c    | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +6 -1
index 580e7e82034fa..53ccacf99eca4 100644
@@ -1000,7 +1000,7 @@ void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx)
 
 		pipe_ctx->stream_res.audio->funcs->az_enable(pipe_ctx->stream_res.audio);
 
-		if (num_audio == 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
+		if (num_audio >= 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
 			/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
 			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
 		/* un-mute audio */
@@ -1017,6 +1017,8 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)
 	pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control(
 			pipe_ctx->stream_res.stream_enc, true);
 	if (pipe_ctx->stream_res.audio) {
+		struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu;
+
 		if (option != KEEP_ACQUIRED_RESOURCE ||
 				!dc->debug.az_endpoint_mute_only) {
 			/*only disalbe az_endpoint if power down or free*/
@@ -1036,6 +1038,9 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)
 			update_audio_usage(&dc->current_state->res_ctx, dc->res_pool, pipe_ctx->stream_res.audio, false);
 			pipe_ctx->stream_res.audio = NULL;
 		}
+		if (pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
+			/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
+			pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
 
 		/* TODO: notify audio driver for if audio modes list changed
 		 * add audio mode list change flag */
Signature · 1 line
2.19.1
author maintainer
#76 lore raw

PATCH 76/152 vhost: return EINVAL if iovecs size does not match the message size

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 74ad7419489ddade8044e3c9ab064ad656520306 ]

We've failed to copy and process vhost_iotlb_msg so let userspace at least know about it. For instance before these patch the code below runs without any error:

int main()
{
struct vhost_msg msg;
struct iovec iov;
int fd;

  fd = open("/dev/vhost-net", O_RDWR);
  if (fd == -1) {
    perror("open");
    return 1;
  }

  iov.iov_base = &msg;
  iov.iov_len = sizeof(msg)-4;

  if (writev(fd, &iov,1) == -1) {
    perror("writev");
    return 1;
  }

return 0;
}

---
 drivers/vhost/vhost.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/vhost/vhost.c +6 -2
index 5eaeca805c95c..b214a72d5caad 100644
@@ -1035,8 +1035,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,
 	int type, ret;
 
 	ret = copy_from_iter(&type, sizeof(type), from);
-	if (ret != sizeof(type))
+	if (ret != sizeof(type)) {
+		ret = -EINVAL;
 		goto done;
+	}
 
 	switch (type) {
 	case VHOST_IOTLB_MSG:
@@ -1055,8 +1057,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,
 
 	iov_iter_advance(from, offset);
 	ret = copy_from_iter(&msg, sizeof(msg), from);
-	if (ret != sizeof(msg))
+	if (ret != sizeof(msg)) {
+		ret = -EINVAL;
 		goto done;
+	}
 	if (vhost_process_iotlb_msg(dev, &msg)) {
 		ret = -EFAULT;
 		goto done;
Signature · 1 line
2.19.1
author maintainer
#77 lore raw

PATCH 77/152 drm/sun4i: backend: add missing of_node_puts

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4bb0e6d7258213d4893c2c876712fbba40e712fe ]

The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put.

Remote and port also have augmented reference counts, so drop them on each iteration and at the end of the function, respectively. Remote is only used for the address it contains, not for the contents of that address, so the reference count can be dropped immediately.

The semantic patch that fixes the first part of this problem is as follows (http://coccinelle.lip6.fr):

// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@

for_each_available_child_of_node(root, child) {
... when != of_node_put(child)

       when != e = child

+ of_node_put(child);
? break;
...
}
... when != child
// </smpl>

---
 drivers/gpu/drm/sun4i/sun4i_backend.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/sun4i/sun4i_backend.c +3 -2
index d7950b52a1fd9..e30b1f5b9d91a 100644
@@ -717,17 +717,18 @@ static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv,
 		remote = of_graph_get_remote_port_parent(ep);
 		if (!remote)
 			continue;
+		of_node_put(remote);
 
 		/* does this node match any registered engines? */
 		list_for_each_entry(frontend, &drv->frontend_list, list) {
 			if (remote == frontend->node) {
-				of_node_put(remote);
 				of_node_put(port);
+				of_node_put(ep);
 				return frontend;
 			}
 		}
 	}
-
+	of_node_put(port);
 	return ERR_PTR(-EINVAL);
 }
 
Signature · 1 line
2.19.1
author maintainer
#78 lore raw

PATCH 78/152 pvcalls-front: fix potential null dereference

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b4711098066f1cf808d4dc11a1a842860a3292fe ]

static checker warning:

    drivers/xen/pvcalls-front.c:373 alloc_active_ring()
    error: we previously assumed 'map->active.ring' could be null
           (see line 357)

drivers/xen/pvcalls-front.c

    351 static int alloc_active_ring(struct sock_mapping *map)
    352 {
    353     void *bytes;
    354
    355     map->active.ring = (struct pvcalls_data_intf *)
    356         get_zeroed_page(GFP_KERNEL);
    357     if (!map->active.ring)
                    ^^^^^^^^^^^^^^^^^

Check

    358         goto out;
    359
    360     map->active.ring->ring_order = PVCALLS_RING_ORDER;
    361     bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
    362                     PVCALLS_RING_ORDER);
    363     if (!bytes)
    364         goto out;
    365
    366     map->active.data.in = bytes;
    367     map->active.data.out = bytes +
    368         XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
    369
    370     return 0;
    371
    372 out:
--> 373     free_active_ring(map);
                                 ^^^

Add null check on map->active.ring before dereferencing it to avoid any NULL pointer dereferences.

Fixes 9f51c05dc41a ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock")
CC Boris Ostrovsky <[email protected]>
CC Juergen Gross <[email protected]>
CC Stefano Stabellini <[email protected]>
CC Dan Carpenter <[email protected]>
---
 drivers/xen/pvcalls-front.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/xen/pvcalls-front.c +3 -0
index 6357160d466ab..91da7e44d5d4f 100644
@@ -343,6 +343,9 @@ int pvcalls_front_socket(struct socket *sock)
 
 static void free_active_ring(struct sock_mapping *map)
 {
+	if (!map->active.ring)
+		return;
+
 	free_pages((unsigned long)map->active.data.in,
 			map->active.ring->ring_order);
 	free_page((unsigned long)map->active.ring);
Signature · 9 lines
2.19.1




_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
author maintainer
#79 lore raw

PATCH 78/152 pvcalls-front: fix potential null dereference

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit b4711098066f1cf808d4dc11a1a842860a3292fe ]

static checker warning:

    drivers/xen/pvcalls-front.c:373 alloc_active_ring()
    error: we previously assumed 'map->active.ring' could be null
           (see line 357)

drivers/xen/pvcalls-front.c

    351 static int alloc_active_ring(struct sock_mapping *map)
    352 {
    353     void *bytes;
    354
    355     map->active.ring = (struct pvcalls_data_intf *)
    356         get_zeroed_page(GFP_KERNEL);
    357     if (!map->active.ring)
                    ^^^^^^^^^^^^^^^^^

Check

    358         goto out;
    359
    360     map->active.ring->ring_order = PVCALLS_RING_ORDER;
    361     bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
    362                     PVCALLS_RING_ORDER);
    363     if (!bytes)
    364         goto out;
    365
    366     map->active.data.in = bytes;
    367     map->active.data.out = bytes +
    368         XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
    369
    370     return 0;
    371
    372 out:
--> 373     free_active_ring(map);
                                 ^^^

Add null check on map->active.ring before dereferencing it to avoid any NULL pointer dereferences.

Fixes 9f51c05dc41a ("pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock")
CC Boris Ostrovsky <[email protected]>
CC Juergen Gross <[email protected]>
CC Stefano Stabellini <[email protected]>
CC Dan Carpenter <[email protected]>
---
 drivers/xen/pvcalls-front.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/xen/pvcalls-front.c +3 -0
index 6357160d466ab..91da7e44d5d4f 100644
@@ -343,6 +343,9 @@ int pvcalls_front_socket(struct socket *sock)
 
 static void free_active_ring(struct sock_mapping *map)
 {
+	if (!map->active.ring)
+		return;
+
 	free_pages((unsigned long)map->active.data.in,
 			map->active.ring->ring_order);
 	free_page((unsigned long)map->active.ring);
Signature · 1 line
2.19.1
author maintainer
#80 lore raw

PATCH 79/152 selftests: tc-testing: drop test on missing tunnel key id

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit e413615502a3324daba038f529932ba9a5248af0 ]

After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow key-less tunnels"), act_tunnel_key does not reject anymore requests to install 'set' rules where the key id is missing. Therefore, drop the following TDC testcase:

ba4e - Add tunnel_key set action with missing mandatory id parameter

because it's going to become a systematic fail as soon as userspace iproute2 will start supporting key-less tunnels.

---
 .../tc-tests/actions/tunnel_key.json          | 29 -------------------
 1 file changed, 29 deletions(-)
tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +0 -29
index 10b2d894e4362..af5e99d272296 100644
@@ -81,35 +81,6 @@
 	    ]
         ]
     },
-    {
-        "id": "ba4e",
-        "name": "Add tunnel_key set action with missing mandatory id parameter",
-        "category": [
-            "actions",
-            "tunnel_key"
-        ],
-        "setup": [
-            [
-                "$TC actions flush action tunnel_key",
-                0,
-                1,
-                255
-            ]
-        ],
-        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2",
-        "expExitCode": "255",
-        "verifyCmd": "$TC actions list action tunnel_key",
-        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 10.10.10.1.*dst_ip 20.20.20.2",
-        "matchCount": "0",
-        "teardown": [
-	    [
-		"$TC actions flush action tunnel_key",
-		0,
-		1,
-		255
-	    ]
-        ]
-    },
     {
         "id": "a5e0",
         "name": "Add tunnel_key set action with invalid src_ip parameter",
Signature · 1 line
2.19.1
author maintainer
#81 lore raw

PATCH 80/152 selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 5216bd77798e2ed773ecd45f3f368dcaec63e5dd ]

After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port if it wasn't set"), act_tunnel_key doesn't dump anymore the destination port, unless it was explicitly configured. This caused systematic failures in the following TDC test case:

7a88 - Add tunnel_key action with cookie parameter

Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test pass again.

---
 .../selftests/tc-testing/tc-tests/actions/tunnel_key.json       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +1 -1
index af5e99d272296..e7e15a7336b6d 100644
@@ -605,7 +605,7 @@
         "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 7 index 4 cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action tunnel_key index 4",
-        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*dst_port 0.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action tunnel_key"
Signature · 1 line
2.19.1
author maintainer
#82 lore raw

PATCH 81/152 selftests: tc-testing: fix parsing of ife type

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 91fa038d9446b5bf5ea80822790af7dd9bcbb5a2 ]

In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format specifier for the ife type changed from 0x%X to %#llX, causing systematic failures in the following TDC test cases:

7682 - Create valid ife encode action with mark and pass control ef47 - Create valid ife encode action with mark and pipe control df43 - Create valid ife encode action with mark and continue control e4cf - Create valid ife encode action with mark and drop control ccba - Create valid ife encode action with mark and reclassify control a1cf - Create valid ife encode action with mark and jump control cb3d - Create valid ife encode action with mark value at 32-bit maximum 95ed - Create valid ife encode action with prio and pass control aa17 - Create valid ife encode action with prio and pipe control 74c7 - Create valid ife encode action with prio and continue control 7a97 - Create valid ife encode action with prio and drop control f66b - Create valid ife encode action with prio and reclassify control 3056 - Create valid ife encode action with prio and jump control 7dd3 - Create valid ife encode action with prio value at 32-bit maximum 05bb - Create valid ife encode action with tcindex and pass control ce65 - Create valid ife encode action with tcindex and pipe control 09cd - Create valid ife encode action with tcindex and continue control 8eb5 - Create valid ife encode action with tcindex and continue control 451a - Create valid ife encode action with tcindex and drop control d76c - Create valid ife encode action with tcindex and reclassify control e731 - Create valid ife encode action with tcindex and jump control b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum 2a9c - Create valid ife encode action with mac src parameter cf5c - Create valid ife encode action with mac dst parameter 2353 - Create valid ife encode action with mac src and mac dst parameters 552c - Create valid ife encode action with mark and type parameters 0421 - Create valid ife encode action with prio and type parameters 4017 - Create valid ife encode action with tcindex and type parameters fac3 - Create valid ife encode action with index at 32-bit maximnum 7c25 - Create valid ife decode action with pass control
dccb - Create valid ife decode action with pipe control
7bb9 - Create valid ife decode action with continue control d9ad - Create valid ife decode action with drop control
219f - Create valid ife decode action with reclassify control 8f44 - Create valid ife decode action with jump control
b330 - Create ife encode action with cookie

Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').

---
 .../tc-testing/tc-tests/actions/ife.json      | 88 +++++++++----------
 1 file changed, 44 insertions(+), 44 deletions(-)
tools/testing/selftests/tc-testing/tc-tests/actions/ife.json +44 -44
index 637ea0219617f..0da3545cabdb6 100644
@@ -17,7 +17,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -41,7 +41,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 10 pipe index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -65,7 +65,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark continue index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*allow mark.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*allow mark.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -89,7 +89,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 789 drop index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*use mark 789.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*use mark 789.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -113,7 +113,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 656768 reclassify index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 656768.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 656768.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -137,7 +137,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 65 jump 1 index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 2",
-        "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0xED3E.*use mark 65.*index 2",
+        "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0[xX]ED3E.*use mark 65.*index 2",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -161,7 +161,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295 reclassify index 90",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 90",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 4294967295.*index 90",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 4294967295.*index 90",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -185,7 +185,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295999 pipe index 90",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 90",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark 4294967295999.*index 90",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark 4294967295999.*index 90",
         "matchCount": "0",
         "teardown": []
     },
@@ -207,7 +207,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio pass index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow prio.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow prio.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -231,7 +231,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 7 pipe index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 7.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 7.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -255,7 +255,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 3 continue index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use prio 3.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use prio 3.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -279,7 +279,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio drop index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow prio.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow prio.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -303,7 +303,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 998877 reclassify index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 998877.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 998877.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -327,7 +327,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 998877 jump 10 index 9",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 9",
-        "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0xED3E.*use prio 998877.*index 9",
+        "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0[xX]ED3E.*use prio 998877.*index 9",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -351,7 +351,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 4294967295 reclassify index 99",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 99",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 4294967295.*index 99",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 4294967295.*index 99",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -375,7 +375,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 4294967298 pipe index 99",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 99",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 4294967298.*index 99",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 4294967298.*index 99",
         "matchCount": "0",
         "teardown": []
     },
@@ -397,7 +397,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -421,7 +421,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 111 pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 111.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 111.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -445,7 +445,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -469,7 +469,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -493,7 +493,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex drop index 77",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 77",
-        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow tcindex.*index 77",
+        "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow tcindex.*index 77",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -517,7 +517,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex reclassify index 77",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 77",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*allow tcindex.*index 77",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*allow tcindex.*index 77",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -541,7 +541,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex jump 999 index 77",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 77",
-        "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0xED3E.*allow tcindex.*index 77",
+        "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0[xX]ED3E.*allow tcindex.*index 77",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -565,7 +565,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 65535 pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*use tcindex 65535.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*use tcindex 65535.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -589,7 +589,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 65539 pipe index 1",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 65539.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 65539.*index 1",
         "matchCount": "0",
         "teardown": []
     },
@@ -611,7 +611,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark src 00:11:22:33:44:55 pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow mark src 00:11:22:33:44:55.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow mark src 00:11:22:33:44:55.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -635,7 +635,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 9876 dst 00:11:22:33:44:55 reclassify index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -659,7 +659,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow tcindex src 00:aa:bb:cc:dd:ee dst 00:11:22:33:44:55 pass index 11",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 11",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -683,7 +683,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use mark 7 type 0xfefe pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xFEFE.*use mark 7.*index 1",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]FEFE.*use mark 7.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -707,7 +707,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use prio 444 type 0xabba pipe index 21",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 21",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xABBA.*use prio 444.*index 21",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ABBA.*use prio 444.*index 21",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -731,7 +731,7 @@
         "cmdUnderTest": "$TC actions add action ife encode use tcindex 5000 type 0xabcd reclassify index 21",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 21",
-        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xABCD.*use tcindex 5000.*index 21",
+        "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ABCD.*use tcindex 5000.*index 21",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -739,7 +739,7 @@
     },
     {
         "id": "fac3",
-        "name": "Create valid ife encode action with index at 32-bit maximnum",
+        "name": "Create valid ife encode action with index at 32-bit maximum",
         "category": [
             "actions",
             "ife"
@@ -755,7 +755,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 4294967295",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -779,7 +779,7 @@
         "cmdUnderTest": "$TC actions add action ife decode pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action pass.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action pass.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -803,7 +803,7 @@
         "cmdUnderTest": "$TC actions add action ife decode pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -827,7 +827,7 @@
         "cmdUnderTest": "$TC actions add action ife decode continue index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action continue.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action continue.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -851,7 +851,7 @@
         "cmdUnderTest": "$TC actions add action ife decode drop index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action drop.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action drop.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -875,7 +875,7 @@
         "cmdUnderTest": "$TC actions add action ife decode reclassify index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -899,7 +899,7 @@
         "cmdUnderTest": "$TC actions add action ife decode jump 10 index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 1",
-        "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0x0.*allow mark allow tcindex allow prio.*index 1",
+        "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action ife"
@@ -923,7 +923,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295999",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4294967295999",
-        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295999",
+        "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295999",
         "matchCount": "0",
         "teardown": []
     },
@@ -945,7 +945,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow mark kuka index 4",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0xED3E.*allow mark.*index 4",
+        "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0[xX]ED3E.*allow mark.*index 4",
         "matchCount": "0",
         "teardown": []
     },
@@ -967,7 +967,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio pipe index 4 cookie aabbccddeeff112233445566778800a1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1",
         "matchCount": "1",
         "teardown": [
            "$TC actions flush action ife"
@@ -991,7 +991,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow foo pipe index 4",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow foo.*index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow foo.*index 4",
         "matchCount": "0",
         "teardown": []
     },
@@ -1013,7 +1013,7 @@
         "cmdUnderTest": "$TC actions add action ife encode allow prio type 70000 pipe index 4",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action ife index 4",
-        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0x11170.*allow prio.*index 4",
+        "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]11170.*allow prio.*index 4",
         "matchCount": "0",
         "teardown": []
     },
Signature · 1 line
2.19.1
author maintainer
#83 lore raw

PATCH 82/152 afs: Dont set vnode->cb_s_break in afs_validate()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4882a27cec24319d10f95e978ecc80050e3e3e15 ]

A cb_interest record is not necessarily attached to the vnode on entry to afs_validate(), which can cause an oops when we try to bring the vnode's cb_s_break up to date in the default case (ie. no current callback promise and the vnode has not been deleted).

Fix this by simply removing the line, as vnode->cb_s_break will be set when needed by afs_register_server_cb_interest() when we next get a callback promise from RPC call.

The oops looks something like:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
    ...
    RIP: 0010:afs_validate+0x66/0x250 [kafs]
    ...
    Call Trace:
     afs_d_revalidate+0x8d/0x340 [kafs]
     ? __d_lookup+0x61/0x150
     lookup_dcache+0x44/0x70
     ? lookup_dcache+0x44/0x70
     __lookup_hash+0x24/0xa0
     do_unlinkat+0x11d/0x2c0
     __x64_sys_unlink+0x23/0x30
     do_syscall_64+0x4d/0xf0
     entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes ae3b7361dc0e ("afs: Fix validation/callback interaction")
---
 fs/afs/inode.c | 1 -
 1 file changed, 1 deletion(-)
fs/afs/inode.c +0 -1
index 071075d775a95..26aa2d111a28f 100644
@@ -411,7 +411,6 @@ int afs_validate(struct afs_vnode *vnode, struct key *key)
 	} else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) {
 		valid = true;
 	} else {
-		vnode->cb_s_break = vnode->cb_interest->server->cb_s_break;
 		vnode->cb_v_break = vnode->volume->cb_v_break;
 		valid = false;
 	}
Signature · 1 line
2.19.1
author maintainer
#84 lore raw

PATCH 83/152 afs: Fix key refcounting in file locking code

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 59d49076ae3e6912e6d7df2fd68e2337f3d02036 ]

Fix the refcounting of the authentication keys in the file locking code. The vnode->lock_key member points to a key on which it expects to be holding a ref, but it isn't always given an extra ref, however.

Fixes 0fafdc9f888b ("afs: Fix file locking")
---
 fs/afs/flock.c | 4 ++--
 fs/afs/inode.c | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)
fs/afs/flock.c +2 -2
index dc62d15a964b8..1bb300ef362b0 100644
@@ -208,7 +208,7 @@ void afs_lock_work(struct work_struct *work)
 		/* The new front of the queue now owns the state variables. */
 		next = list_entry(vnode->pending_locks.next,
 				  struct file_lock, fl_u.afs.link);
-		vnode->lock_key = afs_file_key(next->fl_file);
+		vnode->lock_key = key_get(afs_file_key(next->fl_file));
 		vnode->lock_type = (next->fl_type == F_RDLCK) ? AFS_LOCK_READ : AFS_LOCK_WRITE;
 		vnode->lock_state = AFS_VNODE_LOCK_WAITING_FOR_CB;
 		goto again;
@@ -413,7 +413,7 @@ static void afs_dequeue_lock(struct afs_vnode *vnode, struct file_lock *fl)
 	/* The new front of the queue now owns the state variables. */
 	next = list_entry(vnode->pending_locks.next,
 			  struct file_lock, fl_u.afs.link);
-	vnode->lock_key = afs_file_key(next->fl_file);
+	vnode->lock_key = key_get(afs_file_key(next->fl_file));
 	vnode->lock_type = (next->fl_type == F_RDLCK) ? AFS_LOCK_READ : AFS_LOCK_WRITE;
 	vnode->lock_state = AFS_VNODE_LOCK_WAITING_FOR_CB;
 	afs_lock_may_be_available(vnode);
fs/afs/inode.c +2 -0
index 26aa2d111a28f..0726e40db0f8b 100644
@@ -542,6 +542,8 @@ void afs_evict_inode(struct inode *inode)
 #endif
 
 	afs_put_permits(rcu_access_pointer(vnode->permit_cache));
+	key_put(vnode->lock_key);
+	vnode->lock_key = NULL;
 	_leave("");
 }
 
Signature · 1 line
2.19.1
author maintainer
#85 lore raw

PATCH 84/152 bpf: dont assume build-id length is always 20 bytes

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 0b698005a9d11c0e91141ec11a2c4918a129f703 ]

Build-id length is not fixed to 20, it can be (man ld /--build-id):
* 128-bit (uuid)
* 160-bit (sha1)
* any length specified in ld --build-id=0xhexstring

To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids, assume that build-id is somewhere in the range of 1 .. 20.
Set the remaining bytes to zero.

v2:
* don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)", we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter this 'if' condition

Fixes 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
---
 kernel/bpf/stackmap.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
kernel/bpf/stackmap.c +5 -2
index e50ef5bca4213..98ad9dc3587aa 100644
@@ -180,11 +180,14 @@ static inline int stack_map_parse_build_id(void *page_addr,
 
 		if (nhdr->n_type == BPF_BUILD_ID &&
 		    nhdr->n_namesz == sizeof("GNU") &&
-		    nhdr->n_descsz == BPF_BUILD_ID_SIZE) {
+		    nhdr->n_descsz > 0 &&
+		    nhdr->n_descsz <= BPF_BUILD_ID_SIZE) {
 			memcpy(build_id,
 			       note_start + note_offs +
 			       ALIGN(sizeof("GNU"), 4) + sizeof(Elf32_Nhdr),
-			       BPF_BUILD_ID_SIZE);
+			       nhdr->n_descsz);
+			memset(build_id + nhdr->n_descsz, 0,
+			       BPF_BUILD_ID_SIZE - nhdr->n_descsz);
 			return 0;
 		}
 		new_offs = note_offs + sizeof(Elf32_Nhdr) +
Signature · 1 line
2.19.1
author maintainer
#86 lore raw

PATCH 85/152 bpf: zero out build_id for BPF_STACK_BUILD_ID_IP

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 4af396ae4836c4ecab61e975b8e61270c551894d ]

When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset, make sure that build_id field is empty. Since we are using percpu free list, there is a possibility that we might reuse some previous bpf_stack_build_id with non-zero build_id.

Fixes 615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
---
 kernel/bpf/stackmap.c | 2 ++
 1 file changed, 2 insertions(+)
kernel/bpf/stackmap.c +2 -0
index 98ad9dc3587aa..6a32933cae4ff 100644
@@ -314,6 +314,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
 		for (i = 0; i < trace_nr; i++) {
 			id_offs[i].status = BPF_STACK_BUILD_ID_IP;
 			id_offs[i].ip = ips[i];
+			memset(id_offs[i].build_id, 0, BPF_BUILD_ID_SIZE);
 		}
 		return;
 	}
@@ -324,6 +325,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,
 			/* per entry fall back to ips */
 			id_offs[i].status = BPF_STACK_BUILD_ID_IP;
 			id_offs[i].ip = ips[i];
+			memset(id_offs[i].build_id, 0, BPF_BUILD_ID_SIZE);
 			continue;
 		}
 		id_offs[i].offset = (vma->vm_pgoff << PAGE_SHIFT) + ips[i]
Signature · 1 line
2.19.1
author maintainer
#87 lore raw

PATCH 86/152 selftests/bpf: retry tests that expect build-id

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f67ad87ab3120e82845521b18a2b99273a340308 ]

While running test_progs in a loop I found out that I'm sometimes hitting "Didn't find expected build ID from the map" error.

Looking at stack_map_get_build_id_offset() it seems that it is racy (by design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock current->mm->mmap_sem).

Let's retry this test a single time.

Fixes 13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context")
---
 tools/testing/selftests/bpf/test_progs.c | 30 ++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
tools/testing/selftests/bpf/test_progs.c +30 -0
index d029cad08cbd8..89f8b0dae7ef0 100644
@@ -1136,7 +1136,9 @@ static void test_stacktrace_build_id(void)
 	int i, j;
 	struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
 	int build_id_matches = 0;
+	int retry = 1;
 
+retry:
 	err = bpf_prog_load(file, BPF_PROG_TYPE_TRACEPOINT, &obj, &prog_fd);
 	if (CHECK(err, "prog_load", "err %d errno %d\n", err, errno))
 		goto out;
@@ -1249,6 +1251,19 @@ static void test_stacktrace_build_id(void)
 		previous_key = key;
 	} while (bpf_map_get_next_key(stackmap_fd, &previous_key, &key) == 0);
 
+	/* stack_map_get_build_id_offset() is racy and sometimes can return
+	 * BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID;
+	 * try it one more time.
+	 */
+	if (build_id_matches < 1 && retry--) {
+		ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE);
+		close(pmu_fd);
+		bpf_object__close(obj);
+		printf("%s:WARN:Didn't find expected build ID from the map, retrying\n",
+		       __func__);
+		goto retry;
+	}
+
 	if (CHECK(build_id_matches < 1, "build id match",
 		  "Didn't find expected build ID from the map\n"))
 		goto disable_pmu;
@@ -1289,7 +1304,9 @@ static void test_stacktrace_build_id_nmi(void)
 	int i, j;
 	struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
 	int build_id_matches = 0;
+	int retry = 1;
 
+retry:
 	err = bpf_prog_load(file, BPF_PROG_TYPE_PERF_EVENT, &obj, &prog_fd);
 	if (CHECK(err, "prog_load", "err %d errno %d\n", err, errno))
 		return;
@@ -1384,6 +1401,19 @@ static void test_stacktrace_build_id_nmi(void)
 		previous_key = key;
 	} while (bpf_map_get_next_key(stackmap_fd, &previous_key, &key) == 0);
 
+	/* stack_map_get_build_id_offset() is racy and sometimes can return
+	 * BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID;
+	 * try it one more time.
+	 */
+	if (build_id_matches < 1 && retry--) {
+		ioctl(pmu_fd, PERF_EVENT_IOC_DISABLE);
+		close(pmu_fd);
+		bpf_object__close(obj);
+		printf("%s:WARN:Didn't find expected build ID from the map, retrying\n",
+		       __func__);
+		goto retry;
+	}
+
 	if (CHECK(build_id_matches < 1, "build id match",
 		  "Didn't find expected build ID from the map\n"))
 		goto disable_pmu;
Signature · 1 line
2.19.1
author maintainer
#88 lore raw

PATCH 87/152 atm: he: fix sign-extension overflow on large shift

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit cb12d72b27a6f41325ae23a11033cf5fedfa1b97 ]

Shifting the 1 by exp by an int can lead to sign-extension overlow when exp is 31 since 1 is an signed int and sign-extending this result to an unsigned long long will set the upper 32 bits. Fix this by shifting an unsigned long.

Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour

---
 drivers/atm/he.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/he.c +1 -1
index 29f102dcfec49..329ce9072ee9f 100644
@@ -717,7 +717,7 @@ static int he_init_cs_block_rcm(struct he_dev *he_dev)
 			instead of '/ 512', use '>> 9' to prevent a call
 			to divdu3 on x86 platforms
 		*/
-		rate_cps = (unsigned long long) (1 << exp) * (man + 512) >> 9;
+		rate_cps = (unsigned long long) (1UL << exp) * (man + 512) >> 9;
 
 		if (rate_cps < 10)
 			rate_cps = 10;	/* 2.2.1 minimum payload rate is 10 cps */
Signature · 1 line
2.19.1
author maintainer
#89 lore raw

PATCH 88/152 hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f422449b58548a41e98fc97b259a283718e527db ]

Correct a typo in OF device ID table
The last one should be 'ti,tmp442'

---
 drivers/hwmon/tmp421.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/tmp421.c +1 -1
index e36399213324d..ceb3db6f3fdda 100644
@@ -88,7 +88,7 @@ static const struct of_device_id tmp421_of_match[] = {
 		.data = (void *)2
 	},
 	{
-		.compatible = "ti,tmp422",
+		.compatible = "ti,tmp442",
 		.data = (void *)3
 	},
 	{ },
Signature · 1 line
2.19.1
author maintainer
#90 lore raw

PATCH 89/152 leds: lp5523: fix a missing check of return value of lp55xx_read

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 248b57015f35c94d4eae2fdd8c6febf5cd703900 ]

When lp55xx_read() fails, "status" is an uninitialized variable and thus may contain random value; using it leads to undefined behaviors.

The fix inserts a check for the return value of lp55xx_read: if it fails, returns with its error code.

---
 drivers/leds/leds-lp5523.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/leds/leds-lp5523.c +3 -1
index a2e74feee2b2f..fd64df5a57a5e 100644
@@ -318,7 +318,9 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)
 
 	/* Let the programs run for couple of ms and check the engine status */
 	usleep_range(3000, 6000);
-	lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	ret = lp55xx_read(chip, LP5523_REG_STATUS, &status);
+	if (ret)
+		return ret;
 	status &= LP5523_ENG_STATUS_MASK;
 
 	if (status != LP5523_ENG_STATUS_MASK) {
Signature · 1 line
2.19.1
author maintainer
#91 lore raw

PATCH 90/152 bpf: bpf_setsockopt: reset sock dst on SO_MARK changes

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit f4924f24da8c7ef64195096817f3cde324091d97 ]

In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used to change sk_mark, sk_dst_reset(sk) is called. The same should be done in bpf_setsockopt().

---
 net/core/filter.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
net/core/filter.c +4 -1
index 3400c7abda135..fb0080e84bd43 100644
@@ -3930,7 +3930,10 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,
 			sk->sk_rcvlowat = val ? : 1;
 			break;
 		case SO_MARK:
-			sk->sk_mark = val;
+			if (sk->sk_mark != val) {
+				sk->sk_mark = val;
+				sk_dst_reset(sk);
+			}
 			break;
 		default:
 			ret = -EINVAL;
Signature · 1 line
2.19.1
author maintainer
#92 lore raw

PATCH 91/152 dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit c6ddfb9a963f0cac0f7365acfc87f3f3b33a3b69 ]

As txq_trans_update() only updates trans_start when the lock is held, trans_start does not get updated if NETIF_F_LLTX is declared.

---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +6 -0
index 65a22cd9aef26..029730bbe7db1 100644
@@ -2052,6 +2052,7 @@ static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 	bool nonlinear = skb_is_nonlinear(skb);
 	struct rtnl_link_stats64 *percpu_stats;
 	struct dpaa_percpu_priv *percpu_priv;
+	struct netdev_queue *txq;
 	struct dpaa_priv *priv;
 	struct qm_fd fd;
 	int offset = 0;
@@ -2101,6 +2102,11 @@ static int dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
 	if (unlikely(err < 0))
 		goto skb_to_fd_failed;
 
+	txq = netdev_get_tx_queue(net_dev, queue_mapping);
+
+	/* LLTX requires to do our own update of trans_start */
+	txq->trans_start = jiffies;
+
 	if (priv->tx_tstamp && skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) {
 		fd.cmd |= cpu_to_be32(FM_FD_CMD_UPD);
 		skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
Signature · 1 line
2.19.1
author maintainer
#93 lore raw

PATCH 92/152 mlxsw: pci: Return error on PCI reset timeout

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 67c14cc9b35055264fc0efed00159a7de1819f1b ]

Return an appropriate error in the case when the driver timeouts on waiting for firmware to go out of PCI reset.

Fixes 233fa44bd67a ("mlxsw: pci: Implement reset done check")
---
 drivers/net/ethernet/mellanox/mlxsw/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/pci.c +2 -2
index c7901a3f2a794..a903e97793f9a 100644
@@ -1367,10 +1367,10 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci,
 		u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY);
 
 		if ((val & MLXSW_PCI_FW_READY_MASK) == MLXSW_PCI_FW_READY_MAGIC)
-			break;
+			return 0;
 		cond_resched();
 	} while (time_before(jiffies, end));
-	return 0;
+	return -EBUSY;
 }
 
 static int mlxsw_pci_alloc_irq_vectors(struct mlxsw_pci *mlxsw_pci)
Signature · 1 line
2.19.1
author maintainer
#94 lore raw

PATCH 93/152 net: bridge: Mark FDB entries that were added by user as such

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 710ae72877378e7cde611efd30fe90502a6e5b30 ]

Externally learned entries can be added by a user or by a switch driver that is notifying the bridge driver about entries that were learned in hardware.

In the first case, the entries are not marked with the 'added_by_user' flag, which causes switch drivers to ignore them and not offload them.

The 'added_by_user' flag can be set on externally learned FDB entries based on the 'swdev_notify' parameter in br_fdb_external_learn_add(), which effectively means if the created / updated FDB entry was added by a user or not.

Fixes 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications")
Cc Roopa Prabhu <[email protected]>
Cc Nikolay Aleksandrov <[email protected]>
---
 net/bridge/br_fdb.c | 5 +++++
 1 file changed, 5 insertions(+)
net/bridge/br_fdb.c +5 -0
index 502f663495308..4d4b9b5ea1c17 100644
@@ -1088,6 +1088,8 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
 			err = -ENOMEM;
 			goto err_unlock;
 		}
+		if (swdev_notify)
+			fdb->added_by_user = 1;
 		fdb->added_by_external_learn = 1;
 		fdb_notify(br, fdb, RTM_NEWNEIGH, swdev_notify);
 	} else {
@@ -1107,6 +1109,9 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p,
 			modified = true;
 		}
 
+		if (swdev_notify)
+			fdb->added_by_user = 1;
+
 		if (modified)
 			fdb_notify(br, fdb, RTM_NEWNEIGH, swdev_notify);
 	}
Signature · 1 line
2.19.1
author maintainer
#95 lore raw

PATCH 94/152 mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 64254a2054611205798e6bde634639bc704573ac ]

The driver currently treats static FDB entries as both static and sticky. This is incorrect and prevents such entries from being roamed to a different port via learning.

Fix this by configuring static entries with ageing disabled and roaming enabled.

In net-next we can add proper support for the newly introduced 'sticky' flag.

Fixes 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
---
 .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +6 -6
index cdec48bcc6ad5..af673abdb4823 100644
@@ -1209,7 +1209,7 @@ mlxsw_sp_bridge_port_fdb_flush(struct mlxsw_sp *mlxsw_sp,
 static enum mlxsw_reg_sfd_rec_policy mlxsw_sp_sfd_rec_policy(bool dynamic)
 {
 	return dynamic ? MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS :
-			 MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY;
+			 MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG;
 }
 
 static enum mlxsw_reg_sfd_op mlxsw_sp_sfd_op(bool adding)
@@ -1221,7 +1221,7 @@ static enum mlxsw_reg_sfd_op mlxsw_sp_sfd_op(bool adding)
 static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				     const char *mac, u16 fid, bool adding,
 				     enum mlxsw_reg_sfd_rec_action action,
-				     bool dynamic)
+				     enum mlxsw_reg_sfd_rec_policy policy)
 {
 	char *sfd_pl;
 	u8 num_rec;
@@ -1232,8 +1232,7 @@ static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		return -ENOMEM;
 
 	mlxsw_reg_sfd_pack(sfd_pl, mlxsw_sp_sfd_op(adding), 0);
-	mlxsw_reg_sfd_uc_pack(sfd_pl, 0, mlxsw_sp_sfd_rec_policy(dynamic),
-			      mac, fid, action, local_port);
+	mlxsw_reg_sfd_uc_pack(sfd_pl, 0, policy, mac, fid, action, local_port);
 	num_rec = mlxsw_reg_sfd_num_rec_get(sfd_pl);
 	err = mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sfd), sfd_pl);
 	if (err)
@@ -1252,7 +1251,8 @@ static int mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				   bool dynamic)
 {
 	return __mlxsw_sp_port_fdb_uc_op(mlxsw_sp, local_port, mac, fid, adding,
-					 MLXSW_REG_SFD_REC_ACTION_NOP, dynamic);
+					 MLXSW_REG_SFD_REC_ACTION_NOP,
+					 mlxsw_sp_sfd_rec_policy(dynamic));
 }
 
 int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid,
@@ -1260,7 +1260,7 @@ int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid,
 {
 	return __mlxsw_sp_port_fdb_uc_op(mlxsw_sp, 0, mac, fid, adding,
 					 MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER,
-					 false);
+					 MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY);
 }
 
 static int mlxsw_sp_port_fdb_uc_lag_op(struct mlxsw_sp *mlxsw_sp, u16 lag_id,
Signature · 1 line
2.19.1
author maintainer
#96 lore raw

PATCH 95/152 selftests: forwarding: Add a test case for externally learned FDB entries

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 479a2b761d61c04e2ae97325aa391a8a8c99c23e ]

Test that externally learned FDB entries can roam, but not age out.

---
 .../net/forwarding/bridge_vlan_aware.sh       | 34 ++++++++++++++++++-
 1 file changed, 33 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +33 -1
index 04c6431b2bd8c..b90dff8d3a94b 100755
@@ -1,7 +1,7 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion"
+ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn"
 NUM_NETIFS=4
 CHECK_TC="yes"
 source lib.sh
@@ -109,6 +109,38 @@ vlan_deletion()
 	ping_ipv6
 }
 
+extern_learn()
+{
+	local mac=de:ad:be:ef:13:37
+	local ageing_time
+
+	# Test that externally learned FDB entries can roam, but not age out
+	RET=0
+
+	bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn vlan 1
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "Did not find FDB entry when should"
+
+	# Wait for 10 seconds after the ageing time to make sure the FDB entry
+	# was not aged out
+	ageing_time=$(bridge_ageing_time_get br0)
+	sleep $((ageing_time + 10))
+
+	bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry was aged out when should not"
+
+	$MZ $h2 -c 1 -p 64 -a $mac -t ip -q
+
+	bridge fdb show brport $swp2 | grep -q de:ad:be:ef:13:37
+	check_err $? "FDB entry did not roam when should"
+
+	log_test "Externally learned FDB entry - ageing & roaming"
+
+	bridge fdb del de:ad:be:ef:13:37 dev $swp2 master vlan 1 &> /dev/null
+	bridge fdb del de:ad:be:ef:13:37 dev $swp1 master vlan 1 &> /dev/null
+}
+
 trap cleanup EXIT
 
 setup_prepare
Signature · 1 line
2.19.1
author maintainer
#97 lore raw

PATCH 96/152 net/mlx5e: Fix wrong (zero) TX drop counter indication for representor

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 7fdc1adc52d3975740547a78c2df329bb207f15d ]

For representors, the TX dropped counter is not folded from the per-ring counters. Fix it.

---
 drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +1 -0
index c9cc9747d21d1..701624a63d2f4 100644
@@ -144,6 +144,7 @@ static void mlx5e_rep_update_sw_counters(struct mlx5e_priv *priv)
 
 			s->tx_packets		+= sq_stats->packets;
 			s->tx_bytes		+= sq_stats->bytes;
+			s->tx_queue_dropped	+= sq_stats->dropped;
 		}
 	}
 }
Signature · 1 line
2.19.1
author maintainer
#98 lore raw

PATCH 97/152 isdn: avm: Fix string plus integer warning from Clang

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

[ Upstream commit 7afa81c55fca0cad589722cb4bce698b4803b0e1 ]

A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file.

drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]

                cinfo->version[j] = "\0\0" + 1;
                                    ~~~~~~~^~~
drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning
                cinfo->version[j] = "\0\0" + 1;
                                           ^
                                    &      [  ]

1 warning generated.

This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage.

---
 drivers/isdn/hardware/avm/b1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/isdn/hardware/avm/b1.c +1 -1
index 4ac378e489023..40ca1e8fa09fc 100644
@@ -423,7 +423,7 @@ void b1_parse_version(avmctrl_info *cinfo)
 	int i, j;
 
 	for (j = 0; j < AVM_MAXVERSION; j++)
-		cinfo->version[j] = "\0\0" + 1;
+		cinfo->version[j] = "";
 	for (i = 0, j = 0;
 	     j < AVM_MAXVERSION && i < cinfo->versionlen;
 	     j++, i += cinfo->versionbuf[i] + 1)
Signature · 1 line
2.19.1
author maintainer
#99 lore raw

PATCH 98/152 batman-adv: fix uninit-value in batadv_interface_tx()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 4ffcbfac60642f63ae3d80891f573ba7e94a265c ]

KMSAN reported batadv_interface_tx() was possibly using a garbage value [1]

batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail.

[1]

BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231
CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x173/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231
 __netdev_start_xmit include/linux/netdevice.h:4356 [inline]
 netdev_start_xmit include/linux/netdevice.h:4365 [inline]
 xmit_one net/core/dev.c:3257 [inline]
 dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273
 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843
 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876
 packet_snd net/packet/af_packet.c:2928 [inline]
 packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 __sys_sendto+0x8c4/0xac0 net/socket.c:1788
 __do_sys_sendto net/socket.c:1800 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1796
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x441889
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889
RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0
R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:

 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
 kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
 slab_post_alloc_hook mm/slab.h:446 [inline]
 slab_alloc_node mm/slub.c:2759 [inline]
 __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
 __kmalloc_reserve net/core/skbuff.c:137 [inline]
 __alloc_skb+0x309/0xa20 net/core/skbuff.c:205
 alloc_skb include/linux/skbuff.h:998 [inline]
 alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220
 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083
 packet_alloc_skb net/packet/af_packet.c:2781 [inline]
 packet_snd net/packet/af_packet.c:2872 [inline]
 packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953
 sock_sendmsg_nosec net/socket.c:621 [inline]
 sock_sendmsg net/socket.c:631 [inline]
 __sys_sendto+0x8c4/0xac0 net/socket.c:1788
 __do_sys_sendto net/socket.c:1800 [inline]
 __se_sys_sendto+0x107/0x130 net/socket.c:1796
 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796
 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
 entry_SYSCALL_64_after_hwframe+0x63/0xe7
Fixes c6c8fea29769 ("net: Add batman-adv meshing protocol")
Cc Marek Lindner <[email protected]>
Cc Simon Wunderlich <[email protected]>
Cc Antonio Quartulli <[email protected]>
---
 net/batman-adv/soft-interface.c |    2 ++
 1 file changed, 2 insertions(+)
net/batman-adv/soft-interface.c +2 -0
@@ -227,6 +227,8 @@ static netdev_tx_t batadv_interface_tx(s
 
 	switch (ntohs(ethhdr->h_proto)) {
 	case ETH_P_8021Q:
+		if (!pskb_may_pull(skb, sizeof(*vhdr)))
+			goto dropped;
 		vhdr = vlan_eth_hdr(skb);
 
 		/* drop batman-in-batman packets to prevent loops */
author maintainer
#100 lore raw

PATCH 99/152 inet_diag: fix reporting cgroup classid and fallback to priority

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konstantin Khlebnikov <[email protected]>

[ Upstream commit 1ec17dbd90f8b638f41ee650558609c1af63dfa0 ]

Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested extensions has only 8 bits. Thus extensions starting from DCTCPINFO cannot be requested directly. Some of them included into response unconditionally or hook into some of lower 8 bits.

Extension INET_DIAG_CLASS_ID has not way to request from the beginning.

This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space reservation, and documents behavior for other extensions.

Also this patch adds fallback to reporting socket priority. This filed is more widely used for traffic classification because ipv4 sockets automatically maps TOS to priority and default qdisc pfifo_fast knows about that. But priority could be changed via setsockopt SO_PRIORITY so INET_DIAG_TOS isn't enough for predicting class.

Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen).

So, after this patch INET_DIAG_CLASS_ID will report socket priority for most common setup when net_cls isn't set and/or cgroup2 in use.

Fixes 0888e372c37f ("net: inet: diag: expose sockets cgroup classid")
---
 include/uapi/linux/inet_diag.h |   16 +++++++++++-----
 net/ipv4/inet_diag.c           |   10 +++++++++-
 net/sctp/diag.c                |    1 +
 3 files changed, 21 insertions(+), 6 deletions(-)
include/uapi/linux/inet_diag.h +11 -5
@@ -137,15 +137,21 @@ enum {
 	INET_DIAG_TCLASS,
 	INET_DIAG_SKMEMINFO,
 	INET_DIAG_SHUTDOWN,
-	INET_DIAG_DCTCPINFO,
-	INET_DIAG_PROTOCOL,  /* response attribute only */
+
+	/*
+	 * Next extenstions cannot be requested in struct inet_diag_req_v2:
+	 * its field idiag_ext has only 8 bits.
+	 */
+
+	INET_DIAG_DCTCPINFO,	/* request as INET_DIAG_VEGASINFO */
+	INET_DIAG_PROTOCOL,	/* response attribute only */
 	INET_DIAG_SKV6ONLY,
 	INET_DIAG_LOCALS,
 	INET_DIAG_PEERS,
 	INET_DIAG_PAD,
-	INET_DIAG_MARK,
-	INET_DIAG_BBRINFO,
-	INET_DIAG_CLASS_ID,
+	INET_DIAG_MARK,		/* only with CAP_NET_ADMIN */
+	INET_DIAG_BBRINFO,	/* request as INET_DIAG_VEGASINFO */
+	INET_DIAG_CLASS_ID,	/* request as INET_DIAG_TCLASS */
 	INET_DIAG_MD5SIG,
 	__INET_DIAG_MAX,
 };
net/ipv4/inet_diag.c +9 -1
@@ -108,6 +108,7 @@ static size_t inet_sk_attr_size(struct s
 		+ nla_total_size(1) /* INET_DIAG_TOS */
 		+ nla_total_size(1) /* INET_DIAG_TCLASS */
 		+ nla_total_size(4) /* INET_DIAG_MARK */
+		+ nla_total_size(4) /* INET_DIAG_CLASS_ID */
 		+ nla_total_size(sizeof(struct inet_diag_meminfo))
 		+ nla_total_size(sizeof(struct inet_diag_msg))
 		+ nla_total_size(SK_MEMINFO_VARS * sizeof(u32))
@@ -287,12 +288,19 @@ int inet_sk_diag_fill(struct sock *sk, s
 			goto errout;
 	}
 
-	if (ext & (1 << (INET_DIAG_CLASS_ID - 1))) {
+	if (ext & (1 << (INET_DIAG_CLASS_ID - 1)) ||
+	    ext & (1 << (INET_DIAG_TCLASS - 1))) {
 		u32 classid = 0;
 
 #ifdef CONFIG_SOCK_CGROUP_DATA
 		classid = sock_cgroup_classid(&sk->sk_cgrp_data);
 #endif
+		/* Fallback to socket priority if class id isn't set.
+		 * Classful qdiscs use it as direct reference to class.
+		 * For cgroup2 classid is always zero.
+		 */
+		if (!classid)
+			classid = sk->sk_priority;
 
 		if (nla_put_u32(skb, INET_DIAG_CLASS_ID, classid))
 			goto errout;
net/sctp/diag.c +1 -0
@@ -256,6 +256,7 @@ static size_t inet_assoc_attr_size(struc
 		+ nla_total_size(1) /* INET_DIAG_TOS */
 		+ nla_total_size(1) /* INET_DIAG_TCLASS */
 		+ nla_total_size(4) /* INET_DIAG_MARK */
+		+ nla_total_size(4) /* INET_DIAG_CLASS_ID */
 		+ nla_total_size(addrlen * asoc->peer.transport_count)
 		+ nla_total_size(addrlen * addrcnt)
 		+ nla_total_size(sizeof(struct inet_diag_meminfo))
author maintainer
#101 lore raw

PATCH 100/152 ipv6: propagate genlmsg_reply return code

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Li RongQing <[email protected]>

[ Upstream commit d1f20798a119be71746949ba9b2e2ff330fdc038 ]

genlmsg_reply can fail, so propagate its return code

Fixes 915d7e5e593 ("ipv6: sr: add code base for control plane support of SR-IPv6")
---
 net/ipv6/seg6.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
net/ipv6/seg6.c +1 -3
@@ -221,9 +221,7 @@ static int seg6_genl_get_tunsrc(struct s
 	rcu_read_unlock();
 
 	genlmsg_end(msg, hdr);
-	genlmsg_reply(msg, info);
-
-	return 0;
+	return genlmsg_reply(msg, info);
 
 nla_put_failure:
 	rcu_read_unlock();
author maintainer
#102 lore raw

PATCH 101/152 net: ena: fix race between link up and device initalization

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arthur Kiyanovski <[email protected]>

[ Upstream commit e1f1bd9bfbedcfce428ee7e1b82a6ec12d4c3863 ]

Fix race condition between ena_update_on_link_change() and ena_restore_device().

This race can occur if link notification arrives while the driver is performing a reset sequence. In this case link can be set up, enabling the device, before it is fully restored. If packets are sent at this time, the driver might access uninitialized data structures, causing kernel crash.

Move the clearing of ENA_FLAG_ONGOING_RESET and netif_carrier_on() after ena_up() to ensure the device is ready when link is set up.

Fixes d18e4f683445 ("net: ena: fix race condition between device reset and link up setup")
---
 drivers/net/ethernet/amazon/ena/ena_netdev.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/amazon/ena/ena_netdev.c +5 -5
@@ -2595,11 +2595,6 @@ static int ena_restore_device(struct ena
 		goto err_device_destroy;
 	}
 
-	clear_bit(ENA_FLAG_ONGOING_RESET, &adapter->flags);
-	/* Make sure we don't have a race with AENQ Links state handler */
-	if (test_bit(ENA_FLAG_LINK_UP, &adapter->flags))
-		netif_carrier_on(adapter->netdev);
-
 	rc = ena_enable_msix_and_set_admin_interrupts(adapter,
 						      adapter->num_queues);
 	if (rc) {
@@ -2616,6 +2611,11 @@ static int ena_restore_device(struct ena
 	}
 
 	set_bit(ENA_FLAG_DEVICE_RUNNING, &adapter->flags);
+
+	clear_bit(ENA_FLAG_ONGOING_RESET, &adapter->flags);
+	if (test_bit(ENA_FLAG_LINK_UP, &adapter->flags))
+		netif_carrier_on(adapter->netdev);
+
 	mod_timer(&adapter->timer_service, round_jiffies(jiffies + HZ));
 	dev_err(&pdev->dev, "Device reset completed successfully\n");
 
author maintainer
#103 lore raw

PATCH 102/152 net/mlx4_en: Force CHECKSUM_NONE for short ethernet frames

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Saeed Mahameed <[email protected]>

[ Upstream commit 29dded89e80e3fff61efb34f07a8a3fba3ea146d ]

When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets.
This repeatedly causes kernel hardware checksum fault.

Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage.

Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit.

Fixes 88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends")
Cc Eric Dumazet <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx4/en_rx.c |   20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx4/en_rx.c +19 -1
@@ -620,6 +620,8 @@ static int get_fixed_ipv6_csum(__wsum hw
 }
 #endif
 
+#define short_frame(size) ((size) <= ETH_ZLEN + ETH_FCS_LEN)
+
 /* We reach this function only after checking that any of
  * the (IPv4 | IPv6) bits are set in cqe->status.
  */
@@ -627,9 +629,20 @@ static int check_csum(struct mlx4_cqe *c
 		      netdev_features_t dev_features)
 {
 	__wsum hw_checksum = 0;
+	void *hdr;
 
-	void *hdr = (u8 *)va + sizeof(struct ethhdr);
+	/* CQE csum doesn't cover padding octets in short ethernet
+	 * frames. And the pad field is appended prior to calculating
+	 * and appending the FCS field.
+	 *
+	 * Detecting these padded frames requires to verify and parse
+	 * IP headers, so we simply force all those small frames to skip
+	 * checksum complete.
+	 */
+	if (short_frame(skb->len))
+		return -EINVAL;
 
+	hdr = (u8 *)va + sizeof(struct ethhdr);
 	hw_checksum = csum_unfold((__force __sum16)cqe->checksum);
 
 	if (cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_CVLAN_PRESENT_MASK) &&
@@ -822,6 +835,11 @@ xdp_drop_no_cnt:
 		skb_record_rx_queue(skb, cq_ring);
 
 		if (likely(dev->features & NETIF_F_RXCSUM)) {
+			/* TODO: For IP non TCP/UDP packets when csum complete is
+			 * not an option (not supported or any other reason) we can
+			 * actually check cqe IPOK status bit and report
+			 * CHECKSUM_UNNECESSARY rather than CHECKSUM_NONE
+			 */
 			if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP |
 						       MLX4_CQE_STATUS_UDP)) &&
 			    (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
author maintainer
#104 lore raw

PATCH 103/152 net/mlx5e: Dont overwrite pedit action when multiple pedit used

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Tonghao Zhang <[email protected]>

[ Upstream commit 218d05ce326f9e1b40a56085431fa1068b43d5d9 ]

In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective.

$ tc filter add dev netdev_rep parent ffff: protocol ip prio 1    \
	flower skip_sw ip_proto icmp dst_ip 3.3.3.3        \
	action pedit ex munge ip dst set 192.168.1.100 pipe    \
	action pedit ex munge eth src set 00:00:00:00:00:01 pipe    \
	action pedit ex munge eth dst set 00:00:00:00:00:02 pipe    \
	action csum ip pipe    \
	action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \
	action mirred egress redirect dev vxlan0

To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions.

Fixes d79b6df6b10a ("net/mlx5e: Add parsing of TC pedit actions to HW format")
Cc Or Gerlitz <[email protected]>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c |   25 ++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +15 -10
@@ -96,6 +96,7 @@ struct mlx5e_tc_flow_parse_attr {
 	struct ip_tunnel_info tun_info;
 	struct mlx5_flow_spec spec;
 	int num_mod_hdr_actions;
+	int max_mod_hdr_actions;
 	void *mod_hdr_actions;
 	int mirred_ifindex;
 };
@@ -1742,9 +1743,9 @@ static struct mlx5_fields fields[] = {
 	OFFLOAD(UDP_DPORT, 2, udp.dest,   0),
 };
 
-/* On input attr->num_mod_hdr_actions tells how many HW actions can be parsed at
- * max from the SW pedit action. On success, it says how many HW actions were
- * actually parsed.
+/* On input attr->max_mod_hdr_actions tells how many HW actions can be parsed at
+ * max from the SW pedit action. On success, attr->num_mod_hdr_actions
+ * says how many HW actions were actually parsed.
  */
 static int offload_pedit_fields(struct pedit_headers *masks,
 				struct pedit_headers *vals,
@@ -1767,9 +1768,11 @@ static int offload_pedit_fields(struct p
 	add_vals = &vals[TCA_PEDIT_KEY_EX_CMD_ADD];
 
 	action_size = MLX5_UN_SZ_BYTES(set_action_in_add_action_in_auto);
-	action = parse_attr->mod_hdr_actions;
-	max_actions = parse_attr->num_mod_hdr_actions;
-	nactions = 0;
+	action = parse_attr->mod_hdr_actions +
+		 parse_attr->num_mod_hdr_actions * action_size;
+
+	max_actions = parse_attr->max_mod_hdr_actions;
+	nactions = parse_attr->num_mod_hdr_actions;
 
 	for (i = 0; i < ARRAY_SIZE(fields); i++) {
 		f = &fields[i];
@@ -1874,7 +1877,7 @@ static int alloc_mod_hdr_actions(struct
 	if (!parse_attr->mod_hdr_actions)
 		return -ENOMEM;
 
-	parse_attr->num_mod_hdr_actions = max_actions;
+	parse_attr->max_mod_hdr_actions = max_actions;
 	return 0;
 }
 
@@ -1918,9 +1921,11 @@ static int parse_tc_pedit_action(struct
 			goto out_err;
 	}
 
-	err = alloc_mod_hdr_actions(priv, a, namespace, parse_attr);
-	if (err)
-		goto out_err;
+	if (!parse_attr->mod_hdr_actions) {
+		err = alloc_mod_hdr_actions(priv, a, namespace, parse_attr);
+		if (err)
+			goto out_err;
+	}
 
 	err = offload_pedit_fields(masks, vals, parse_attr);
 	if (err < 0)
author maintainer
#105 lore raw

PATCH 104/152 net/packet: fix 4gb buffer limit due to overflow check

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kal Conley <[email protected]>

[ Upstream commit fc62814d690cf62189854464f4bd07457d5e9e50 ]

When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Check it for overflow without limiting the total buffer size to UINT_MAX.

This change fixes support for packet ring buffers >= UINT_MAX.

Fixes 8f8d28e4d6d8 ("net/packet: fix overflow in check for tp_frame_nr")
---
 net/packet/af_packet.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/packet/af_packet.c +1 -1
@@ -4275,7 +4275,7 @@ static int packet_set_ring(struct sock *
 		rb->frames_per_block = req->tp_block_size / req->tp_frame_size;
 		if (unlikely(rb->frames_per_block == 0))
 			goto out;
-		if (unlikely(req->tp_block_size > UINT_MAX / req->tp_block_nr))
+		if (unlikely(rb->frames_per_block > UINT_MAX / req->tp_block_nr))
 			goto out;
 		if (unlikely((rb->frames_per_block * req->tp_block_nr) !=
 					req->tp_frame_nr))
author maintainer
#106 lore raw

PATCH 105/152 net: sfp: do not probe SFP module before were attached

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Russell King <[email protected]>

[ Upstream commit b5bfc21af5cb3d53f9cee0ef82eaa43762a90f81 ]

When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call.

Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver.

---
 drivers/net/phy/sfp-bus.c |    2 ++
 drivers/net/phy/sfp.c     |   30 +++++++++++++++++++++---------
 drivers/net/phy/sfp.h     |    2 ++
 3 files changed, 25 insertions(+), 9 deletions(-)
drivers/net/phy/sfp-bus.c +2 -0
@@ -347,6 +347,7 @@ static int sfp_register_bus(struct sfp_b
 				return ret;
 		}
 	}
+	bus->socket_ops->attach(bus->sfp);
 	if (bus->started)
 		bus->socket_ops->start(bus->sfp);
 	bus->netdev->sfp_bus = bus;
@@ -362,6 +363,7 @@ static void sfp_unregister_bus(struct sf
 	if (bus->registered) {
 		if (bus->started)
 			bus->socket_ops->stop(bus->sfp);
+		bus->socket_ops->detach(bus->sfp);
 		if (bus->phydev && ops && ops->disconnect_phy)
 			ops->disconnect_phy(bus->upstream);
 	}
drivers/net/phy/sfp.c +21 -9
@@ -184,6 +184,7 @@ struct sfp {
 
 	struct gpio_desc *gpio[GPIO_MAX];
 
+	bool attached;
 	unsigned int state;
 	struct delayed_work poll;
 	struct delayed_work timeout;
@@ -1475,7 +1476,7 @@ static void sfp_sm_event(struct sfp *sfp
 	 */
 	switch (sfp->sm_mod_state) {
 	default:
-		if (event == SFP_E_INSERT) {
+		if (event == SFP_E_INSERT && sfp->attached) {
 			sfp_module_tx_disable(sfp);
 			sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
 		}
@@ -1607,6 +1608,19 @@ static void sfp_sm_event(struct sfp *sfp
 	mutex_unlock(&sfp->sm_mutex);
 }
 
+static void sfp_attach(struct sfp *sfp)
+{
+	sfp->attached = true;
+	if (sfp->state & SFP_F_PRESENT)
+		sfp_sm_event(sfp, SFP_E_INSERT);
+}
+
+static void sfp_detach(struct sfp *sfp)
+{
+	sfp->attached = false;
+	sfp_sm_event(sfp, SFP_E_REMOVE);
+}
+
 static void sfp_start(struct sfp *sfp)
 {
 	sfp_sm_event(sfp, SFP_E_DEV_UP);
@@ -1667,6 +1681,8 @@ static int sfp_module_eeprom(struct sfp
 }
 
 static const struct sfp_socket_ops sfp_module_ops = {
+	.attach = sfp_attach,
+	.detach = sfp_detach,
 	.start = sfp_start,
 	.stop = sfp_stop,
 	.module_info = sfp_module_info,
@@ -1834,10 +1850,6 @@ static int sfp_probe(struct platform_dev
 	dev_info(sfp->dev, "Host maximum power %u.%uW\n",
 		 sfp->max_power_mW / 1000, (sfp->max_power_mW / 100) % 10);
 
-	sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops);
-	if (!sfp->sfp_bus)
-		return -ENOMEM;
-
 	/* Get the initial state, and always signal TX disable,
 	 * since the network interface will not be up.
 	 */
@@ -1848,10 +1860,6 @@ static int sfp_probe(struct platform_dev
 		sfp->state |= SFP_F_RATE_SELECT;
 	sfp_set_state(sfp, sfp->state);
 	sfp_module_tx_disable(sfp);
-	rtnl_lock();
-	if (sfp->state & SFP_F_PRESENT)
-		sfp_sm_event(sfp, SFP_E_INSERT);
-	rtnl_unlock();
 
 	for (i = 0; i < GPIO_MAX; i++) {
 		if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
@@ -1884,6 +1892,10 @@ static int sfp_probe(struct platform_dev
 		dev_warn(sfp->dev,
 			 "No tx_disable pin: SFP modules will always be emitting.\n");
 
+	sfp->sfp_bus = sfp_register_socket(sfp->dev, sfp, &sfp_module_ops);
+	if (!sfp->sfp_bus)
+		return -ENOMEM;
+
 	return 0;
 }
 
drivers/net/phy/sfp.h +2 -0
@@ -7,6 +7,8 @@
 struct sfp;
 
 struct sfp_socket_ops {
+	void (*attach)(struct sfp *sfp);
+	void (*detach)(struct sfp *sfp);
 	void (*start)(struct sfp *sfp);
 	void (*stop)(struct sfp *sfp);
 	int (*module_info)(struct sfp *sfp, struct ethtool_modinfo *modinfo);
author maintainer
#107 lore raw

PATCH 106/152 sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit fc228abc2347e106a44c0e9b29ab70b712c4ca51 ]

Jianlin reported a panic when running sctp gso over gre over vlan device:

  [   84.772930] RIP: 0010:do_csum+0x6d/0x170
  [   84.790605] Call Trace:
  [   84.791054]  csum_partial+0xd/0x20
  [   84.791657]  gre_gso_segment+0x2c3/0x390
  [   84.792364]  inet_gso_segment+0x161/0x3e0
  [   84.793071]  skb_mac_gso_segment+0xb8/0x120
  [   84.793846]  __skb_gso_segment+0x7e/0x180
  [   84.794581]  validate_xmit_skb+0x141/0x2e0
  [   84.795297]  __dev_queue_xmit+0x258/0x8f0
  [   84.795949]  ? eth_header+0x26/0xc0
  [   84.796581]  ip_finish_output2+0x196/0x430
  [   84.797295]  ? skb_gso_validate_network_len+0x11/0x80
  [   84.798183]  ? ip_finish_output+0x169/0x270
  [   84.798875]  ip_output+0x6c/0xe0
  [   84.799413]  ? ip_append_data.part.50+0xc0/0xc0
  [   84.800145]  iptunnel_xmit+0x144/0x1c0
  [   84.800814]  ip_tunnel_xmit+0x62d/0x930 [ip_tunnel]
  [   84.801699]  gre_tap_xmit+0xac/0xf0 [ip_gre]
  [   84.802395]  dev_hard_start_xmit+0xa5/0x210
  [   84.803086]  sch_direct_xmit+0x14f/0x340
  [   84.803733]  __dev_queue_xmit+0x799/0x8f0
  [   84.804472]  ip_finish_output2+0x2e0/0x430
  [   84.805255]  ? skb_gso_validate_network_len+0x11/0x80
  [   84.806154]  ip_output+0x6c/0xe0
  [   84.806721]  ? ip_append_data.part.50+0xc0/0xc0
  [   84.807516]  sctp_packet_transmit+0x716/0xa10 [sctp]
  [   84.808337]  sctp_outq_flush+0xd7/0x880 [sctp]

It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment. sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM', which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment().

For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start.

So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when computing checksum in sctp_gso_segment.

---
 net/sctp/offload.c |    1 +
 1 file changed, 1 insertion(+)
net/sctp/offload.c +1 -0
@@ -36,6 +36,7 @@ static __le32 sctp_gso_make_checksum(str
 {
 	skb->ip_summed = CHECKSUM_NONE;
 	skb->csum_not_inet = 0;
+	gso_reset_checksum(skb, ~0);
 	return sctp_compute_cksum(skb, skb_transport_offset(skb));
 }
 
author maintainer
#108 lore raw

PATCH 107/152 sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xin Long <[email protected]>

[ Upstream commit af98c5a78517c04adb5fd68bb64b1ad6fe3d473f ]

In sctp_stream_init(), after sctp_stream_outq_migrate() freed the surplus streams' ext, but sctp_stream_alloc_out() returns -ENOMEM, stream->outcnt will not be set to 'outcnt'.

With the bigger value on stream->outcnt, when closing the assoc and freeing its streams, the ext of those surplus streams will be freed again since those stream exts were not set to NULL after freeing in sctp_stream_outq_migrate(). Then the invalid-free issue reported by syzbot would be triggered.

We fix it by simply setting them to NULL after freeing.

Fixes 5bbbbe32a431 ("sctp: introduce stream scheduler foundations")
Reported-by [email protected]
---
 net/sctp/stream.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/sctp/stream.c +3 -1
@@ -144,8 +144,10 @@ static void sctp_stream_outq_migrate(str
 		}
 	}
 
-	for (i = outcnt; i < stream->outcnt; i++)
+	for (i = outcnt; i < stream->outcnt; i++) {
 		kfree(SCTP_SO(stream, i)->ext);
+		SCTP_SO(stream, i)->ext = NULL;
+	}
 }
 
 static int sctp_stream_alloc_out(struct sctp_stream *stream, __u16 outcnt,
author maintainer
#109 lore raw

PATCH 108/152 team: avoid complex list operations in team_nl_cmd_options_set()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

[ Upstream commit 2fdeee2549231b1f989f011bb18191f5660d3745 ]

The current opt_inst_list operations inside team_nl_cmd_options_set() is too complex to track:

    LIST_HEAD(opt_inst_list);
    nla_for_each_nested(...) {
        list_for_each_entry(opt_inst, &team->option_inst_list, list) {
            if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst))
                continue;
            list_add(&opt_inst->tmp_list, &opt_inst_list);
        }
    }
    team_nl_send_event_options_get(team, &opt_inst_list);

as while we retrieve 'opt_inst' from team->option_inst_list, it could be added to the local 'opt_inst_list' for multiple times. The __team_option_inst_tmp_find() doesn't work, as the setter team_mode_option_set() still calls team->ops.exit() which uses ->tmp_list too in __team_options_change_check().

Simplify the list operations by moving the 'opt_inst_list' and team_nl_send_event_options_get() into the nla_for_each_nested() loop so that it can be guranteed that we won't insert a same list entry for multiple times. Therefore, __team_option_inst_tmp_find() can be removed too.

Fixes 4fb0534fb7bb ("team: avoid adding twice the same option to the event list")
Fixes 2fcdb2c9e659 ("team: allow to send multiple set events in one message")
Reported-by [email protected]
Reported-by [email protected]
Cc Jiri Pirko <[email protected]>
Cc Paolo Abeni <[email protected]>
---
 drivers/net/team/team.c |   27 +++++----------------------
 1 file changed, 5 insertions(+), 22 deletions(-)
drivers/net/team/team.c +5 -22
@@ -256,17 +256,6 @@ static void __team_option_inst_mark_remo
 	}
 }
 
-static bool __team_option_inst_tmp_find(const struct list_head *opts,
-					const struct team_option_inst *needle)
-{
-	struct team_option_inst *opt_inst;
-
-	list_for_each_entry(opt_inst, opts, tmp_list)
-		if (opt_inst == needle)
-			return true;
-	return false;
-}
-
 static int __team_options_register(struct team *team,
 				   const struct team_option *option,
 				   size_t option_count)
@@ -2463,7 +2452,6 @@ static int team_nl_cmd_options_set(struc
 	int err = 0;
 	int i;
 	struct nlattr *nl_option;
-	LIST_HEAD(opt_inst_list);
 
 	rtnl_lock();
 
@@ -2483,6 +2471,7 @@ static int team_nl_cmd_options_set(struc
 		struct nlattr *opt_attrs[TEAM_ATTR_OPTION_MAX + 1];
 		struct nlattr *attr;
 		struct nlattr *attr_data;
+		LIST_HEAD(opt_inst_list);
 		enum team_option_type opt_type;
 		int opt_port_ifindex = 0; /* != 0 for per-port options */
 		u32 opt_array_index = 0;
@@ -2587,23 +2576,17 @@ static int team_nl_cmd_options_set(struc
 			if (err)
 				goto team_put;
 			opt_inst->changed = true;
-
-			/* dumb/evil user-space can send us duplicate opt,
-			 * keep only the last one
-			 */
-			if (__team_option_inst_tmp_find(&opt_inst_list,
-							opt_inst))
-				continue;
-
 			list_add(&opt_inst->tmp_list, &opt_inst_list);
 		}
 		if (!opt_found) {
 			err = -ENOENT;
 			goto team_put;
 		}
-	}
 
-	err = team_nl_send_event_options_get(team, &opt_inst_list);
+		err = team_nl_send_event_options_get(team, &opt_inst_list);
+		if (err)
+			break;
+	}
 
 team_put:
 	team_nl_team_put(team);
author maintainer
#110 lore raw

PATCH 109/152 Revert "socket: fix struct ifreq size in compat ioctl"

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 63ff03ab786ab1bc6cca01d48eacd22c95b9b3eb ]

This reverts commit 1cebf8f143c2 ("socket: fix struct ifreq size in compat ioctl"), it's a bugfix for another commit that I'll revert next.

This is not a 'perfect' revert, I'm keeping some coding style intact rather than revert to the state with indentation errors.

Fixes 1cebf8f143c2 ("socket: fix struct ifreq size in compat ioctl")
---
 net/socket.c |   22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)
net/socket.c +8 -14
@@ -941,8 +941,7 @@ void dlci_ioctl_set(int (*hook) (unsigne
 EXPORT_SYMBOL(dlci_ioctl_set);
 
 static long sock_do_ioctl(struct net *net, struct socket *sock,
-			  unsigned int cmd, unsigned long arg,
-			  unsigned int ifreq_size)
+			  unsigned int cmd, unsigned long arg)
 {
 	int err;
 	void __user *argp = (void __user *)arg;
@@ -968,11 +967,11 @@ static long sock_do_ioctl(struct net *ne
 	} else {
 		struct ifreq ifr;
 		bool need_copyout;
-		if (copy_from_user(&ifr, argp, ifreq_size))
+		if (copy_from_user(&ifr, argp, sizeof(struct ifreq)))
 			return -EFAULT;
 		err = dev_ioctl(net, cmd, &ifr, &need_copyout);
 		if (!err && need_copyout)
-			if (copy_to_user(argp, &ifr, ifreq_size))
+			if (copy_to_user(argp, &ifr, sizeof(struct ifreq)))
 				return -EFAULT;
 	}
 	return err;
@@ -1071,8 +1070,7 @@ static long sock_ioctl(struct file *file
 			err = open_related_ns(&net->ns, get_net_ns);
 			break;
 		default:
-			err = sock_do_ioctl(net, sock, cmd, arg,
-					    sizeof(struct ifreq));
+			err = sock_do_ioctl(net, sock, cmd, arg);
 			break;
 		}
 	return err;
@@ -2752,8 +2750,7 @@ static int do_siocgstamp(struct net *net
 	int err;
 
 	set_fs(KERNEL_DS);
-	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv,
-			    sizeof(struct compat_ifreq));
+	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&ktv);
 	set_fs(old_fs);
 	if (!err)
 		err = compat_put_timeval(&ktv, up);
@@ -2769,8 +2766,7 @@ static int do_siocgstampns(struct net *n
 	int err;
 
 	set_fs(KERNEL_DS);
-	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts,
-			    sizeof(struct compat_ifreq));
+	err = sock_do_ioctl(net, sock, cmd, (unsigned long)&kts);
 	set_fs(old_fs);
 	if (!err)
 		err = compat_put_timespec(&kts, up);
@@ -3081,8 +3077,7 @@ static int routing_ioctl(struct net *net
 	}
 
 	set_fs(KERNEL_DS);
-	ret = sock_do_ioctl(net, sock, cmd, (unsigned long) r,
-			    sizeof(struct compat_ifreq));
+	ret = sock_do_ioctl(net, sock, cmd, (unsigned long) r);
 	set_fs(old_fs);
 
 out:
@@ -3195,8 +3190,7 @@ static int compat_sock_ioctl_trans(struc
 	case SIOCBONDSETHWADDR:
 	case SIOCBONDCHANGEACTIVE:
 	case SIOCGIFNAME:
-		return sock_do_ioctl(net, sock, cmd, arg,
-				     sizeof(struct compat_ifreq));
+		return sock_do_ioctl(net, sock, cmd, arg);
 	}
 
 	return -ENOIOCTLCMD;
author maintainer
#111 lore raw

PATCH 110/152 Revert "kill dev_ifsioc()"

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 37ac39bdddc528c998a9f36db36937de923fdf2a ]

This reverts commit bf4405737f9f ("kill dev_ifsioc()").

This wasn't really unused as implied by the original commit, it still handles the copy to/from user differently, and the commit thus caused issues such as
https://bugzilla.kernel.org/show_bug.cgi?id=199469
and
https://bugzilla.kernel.org/show_bug.cgi?id=202273

However, deviating from a strict revert, rename dev_ifsioc() to compat_ifreq_ioctl() to be clearer as to its purpose and add a comment.

Fixes bf4405737f9f ("kill dev_ifsioc()")
---
 net/socket.c |   49 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
net/socket.c +49 -0
@@ -2962,6 +2962,53 @@ static int compat_ifr_data_ioctl(struct
 	return dev_ioctl(net, cmd, &ifreq, NULL);
 }
 
+static int compat_ifreq_ioctl(struct net *net, struct socket *sock,
+			      unsigned int cmd,
+			      struct compat_ifreq __user *uifr32)
+{
+	struct ifreq __user *uifr;
+	int err;
+
+	/* Handle the fact that while struct ifreq has the same *layout* on
+	 * 32/64 for everything but ifreq::ifru_ifmap and ifreq::ifru_data,
+	 * which are handled elsewhere, it still has different *size* due to
+	 * ifreq::ifru_ifmap (which is 16 bytes on 32 bit, 24 bytes on 64-bit,
+	 * resulting in struct ifreq being 32 and 40 bytes respectively).
+	 * As a result, if the struct happens to be at the end of a page and
+	 * the next page isn't readable/writable, we get a fault. To prevent
+	 * that, copy back and forth to the full size.
+	 */
+
+	uifr = compat_alloc_user_space(sizeof(*uifr));
+	if (copy_in_user(uifr, uifr32, sizeof(*uifr32)))
+		return -EFAULT;
+
+	err = sock_do_ioctl(net, sock, cmd, (unsigned long)uifr);
+
+	if (!err) {
+		switch (cmd) {
+		case SIOCGIFFLAGS:
+		case SIOCGIFMETRIC:
+		case SIOCGIFMTU:
+		case SIOCGIFMEM:
+		case SIOCGIFHWADDR:
+		case SIOCGIFINDEX:
+		case SIOCGIFADDR:
+		case SIOCGIFBRDADDR:
+		case SIOCGIFDSTADDR:
+		case SIOCGIFNETMASK:
+		case SIOCGIFPFLAGS:
+		case SIOCGIFTXQLEN:
+		case SIOCGMIIPHY:
+		case SIOCGMIIREG:
+			if (copy_in_user(uifr32, uifr, sizeof(*uifr32)))
+				err = -EFAULT;
+			break;
+		}
+	}
+	return err;
+}
+
 static int compat_sioc_ifmap(struct net *net, unsigned int cmd,
 			struct compat_ifreq __user *uifr32)
 {
@@ -3181,6 +3228,8 @@ static int compat_sock_ioctl_trans(struc
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
+		return compat_ifreq_ioctl(net, sock, cmd, argp);
+
 	case SIOCSARP:
 	case SIOCGARP:
 	case SIOCDARP:
author maintainer
#112 lore raw

PATCH 111/152 net: socket: fix SIOCGIFNAME in compat

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit c6c9fee35dc27362b7bac34b2fc9f5b8ace2e22c ]

As reported by Robert O'Callahan in
https://bugzilla.kernel.org/show_bug.cgi?id=202273
reverting the previous changes in this area broke the SIOCGIFNAME ioctl in compat again (I'd previously fixed it after his previous report of breakage in
https://bugzilla.kernel.org/show_bug.cgi?id=199469).

This is obviously because I fixed SIOCGIFNAME more or less by accident.

Fix it explicitly now by making it pass through the restored compat translation code.

---
 net/socket.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/socket.c +2 -1
@@ -3001,6 +3001,7 @@ static int compat_ifreq_ioctl(struct net
 		case SIOCGIFTXQLEN:
 		case SIOCGMIIPHY:
 		case SIOCGMIIREG:
+		case SIOCGIFNAME:
 			if (copy_in_user(uifr32, uifr, sizeof(*uifr32)))
 				err = -EFAULT;
 			break;
@@ -3224,6 +3225,7 @@ static int compat_sock_ioctl_trans(struc
 	case SIOCSIFTXQLEN:
 	case SIOCBRADDIF:
 	case SIOCBRDELIF:
+	case SIOCGIFNAME:
 	case SIOCSIFNAME:
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
@@ -3238,7 +3240,6 @@ static int compat_sock_ioctl_trans(struc
 	case SIOCBONDRELEASE:
 	case SIOCBONDSETHWADDR:
 	case SIOCBONDCHANGEACTIVE:
-	case SIOCGIFNAME:
 		return sock_do_ioctl(net, sock, cmd, arg);
 	}
 
author maintainer
#113 lore raw

PATCH 112/152 net: socket: make bond ioctls go through compat_ifreq_ioctl()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johannes Berg <[email protected]>

[ Upstream commit 98406133dd9cb9f195676eab540c270dceca879a ]

Same story as before, these use struct ifreq and thus need to be read with the shorter version to not cause faults.

Fixes f92d4fc95341 ("kill bond_ioctl()")
---
 net/socket.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
net/socket.c +4 -4
@@ -3230,16 +3230,16 @@ static int compat_sock_ioctl_trans(struc
 	case SIOCGMIIPHY:
 	case SIOCGMIIREG:
 	case SIOCSMIIREG:
+	case SIOCBONDENSLAVE:
+	case SIOCBONDRELEASE:
+	case SIOCBONDSETHWADDR:
+	case SIOCBONDCHANGEACTIVE:
 		return compat_ifreq_ioctl(net, sock, cmd, argp);
 
 	case SIOCSARP:
 	case SIOCGARP:
 	case SIOCDARP:
 	case SIOCATMARK:
-	case SIOCBONDENSLAVE:
-	case SIOCBONDRELEASE:
-	case SIOCBONDSETHWADDR:
-	case SIOCBONDCHANGEACTIVE:
 		return sock_do_ioctl(net, sock, cmd, arg);
 	}
 
author maintainer
#114 lore raw

PATCH 113/152 geneve: should not call rt6_lookup() when ipv6 was disabled

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <[email protected]>

[ Upstream commit c0a47e44c0980b3b23ee31fa7936d70ea5dce491 ]

When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference.

v2:
- don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet)
- there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric).

Fixes c40e89fd358e9 ("geneve: configure MTU based on a lower device")
Cc Alexey Kodanev <[email protected]>
---
 drivers/net/geneve.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/net/geneve.c +7 -3
@@ -1406,9 +1406,13 @@ static void geneve_link_config(struct ne
 	}
 #if IS_ENABLED(CONFIG_IPV6)
 	case AF_INET6: {
-		struct rt6_info *rt = rt6_lookup(geneve->net,
-						 &info->key.u.ipv6.dst, NULL, 0,
-						 NULL, 0);
+		struct rt6_info *rt;
+
+		if (!__in6_dev_get(dev))
+			break;
+
+		rt = rt6_lookup(geneve->net, &info->key.u.ipv6.dst, NULL, 0,
+				NULL, 0);
 
 		if (rt && rt->dst.dev)
 			ldev_mtu = rt->dst.dev->mtu - GENEVE_IPV6_HLEN;
author maintainer
#115 lore raw

PATCH 114/152 sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <[email protected]>

[ Upstream commit 173656accaf583698bac3f9e269884ba60d51ef4 ]

If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This:

ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up
ip addr add 198.51.100.1/24 dev sit1
ping 198.51.100.2

if IPv6 is disabled at boot time, will crash the kernel.

v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()).

Fixes ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error")
Cc Oussama Ghorbel <[email protected]>
---
 net/ipv6/sit.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv6/sit.c +2 -1
@@ -546,7 +546,8 @@ static int ipip6_err(struct sk_buff *skb
 	}
 
 	err = 0;
-	if (!ip6_err_gen_icmpv6_unreach(skb, iph->ihl * 4, type, data_len))
+	if (__in6_dev_get(skb->dev) &&
+	    !ip6_err_gen_icmpv6_unreach(skb, iph->ihl * 4, type, data_len))
 		goto out;
 
 	if (t->parms.iph.daddr == 0)
author maintainer
#116 lore raw

PATCH 115/152 net_sched: fix a race condition in tcindex_destroy()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

[ Upstream commit 8015d93ebd27484418d4952284fd02172fa4b0b2 ]

tcindex_destroy() invokes tcindex_destroy_element() via a walker to delete each filter result in its perfect hash table, and tcindex_destroy_element() calls tcindex_delete() which schedules tcf RCU works to do the final deletion work. Unfortunately this races with the RCU callback __tcindex_destroy(), which could lead to use-after-free as reported by Adrian.

Fix this by migrating this RCU callback to tcf RCU work too, as that workqueue is ordered, we will not have use-after-free.

Note, we don't need to hold netns refcnt because we don't call tcf_exts_destroy() here.

Fixes 27ce4f05e2ab ("net_sched: use tcf_queue_work() in tcindex filter")
Cc Ben Hutchings <[email protected]>
Cc Jamal Hadi Salim <[email protected]>
Cc Jiri Pirko <[email protected]>
---
 net/sched/cls_tcindex.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
net/sched/cls_tcindex.c +11 -7
@@ -48,7 +48,7 @@ struct tcindex_data {
 	u32 hash;		/* hash table size; 0 if undefined */
 	u32 alloc_hash;		/* allocated size */
 	u32 fall_through;	/* 0: only classify if explicit match */
-	struct rcu_head rcu;
+	struct rcu_work rwork;
 };
 
 static inline int tcindex_filter_is_set(struct tcindex_filter_result *r)
@@ -229,9 +229,11 @@ static int tcindex_destroy_element(struc
 	return tcindex_delete(tp, arg, &last, NULL);
 }
 
-static void __tcindex_destroy(struct rcu_head *head)
+static void tcindex_destroy_work(struct work_struct *work)
 {
-	struct tcindex_data *p = container_of(head, struct tcindex_data, rcu);
+	struct tcindex_data *p = container_of(to_rcu_work(work),
+					      struct tcindex_data,
+					      rwork);
 
 	kfree(p->perfect);
 	kfree(p->h);
@@ -258,9 +260,11 @@ static int tcindex_filter_result_init(st
 	return tcf_exts_init(&r->exts, TCA_TCINDEX_ACT, TCA_TCINDEX_POLICE);
 }
 
-static void __tcindex_partial_destroy(struct rcu_head *head)
+static void tcindex_partial_destroy_work(struct work_struct *work)
 {
-	struct tcindex_data *p = container_of(head, struct tcindex_data, rcu);
+	struct tcindex_data *p = container_of(to_rcu_work(work),
+					      struct tcindex_data,
+					      rwork);
 
 	kfree(p->perfect);
 	kfree(p);
@@ -478,7 +482,7 @@ tcindex_set_parms(struct net *net, struc
 	}
 
 	if (oldp)
-		call_rcu(&oldp->rcu, __tcindex_partial_destroy);
+		tcf_queue_work(&oldp->rwork, tcindex_partial_destroy_work);
 	return 0;
 
 errout_alloc:
@@ -570,7 +574,7 @@ static void tcindex_destroy(struct tcf_p
 	walker.fn = tcindex_destroy_element;
 	tcindex_walk(tp, &walker);
 
-	call_rcu(&p->rcu, __tcindex_destroy);
+	tcf_queue_work(&p->rwork, tcindex_destroy_work);
 }
 
 
author maintainer
#117 lore raw

PATCH 116/152 net_sched: fix a memory leak in cls_tcindex

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

[ Upstream commit 033b228e7f26b29ae37f8bfa1bc6b209a5365e9f ]

When tcindex_destroy() destroys all the filter results in the perfect hash table, it invokes the walker to delete each of them. However, results with class==0 are skipped in either tcindex_walk() or tcindex_delete(), which causes a memory leak reported by kmemleak.

This patch fixes it by skipping the walker and directly deleting these filter results so we don't miss any filter result.

As a result of this change, we have to initialize exts->net properly in tcindex_alloc_perfect_hash(). For net-next, we need to consider whether we should initialize ->net in tcf_exts_init() instead, before that just directly test CONFIG_NET_CLS_ACT=y.

---
 net/sched/cls_tcindex.c |   46 ++++++++++++++++++++++++++++++----------------
 1 file changed, 30 insertions(+), 16 deletions(-)
net/sched/cls_tcindex.c +30 -16
@@ -221,14 +221,6 @@ found:
 	return 0;
 }
 
-static int tcindex_destroy_element(struct tcf_proto *tp,
-				   void *arg, struct tcf_walker *walker)
-{
-	bool last;
-
-	return tcindex_delete(tp, arg, &last, NULL);
-}
-
 static void tcindex_destroy_work(struct work_struct *work)
 {
 	struct tcindex_data *p = container_of(to_rcu_work(work),
@@ -279,7 +271,7 @@ static void tcindex_free_perfect_hash(st
 	kfree(cp->perfect);
 }
 
-static int tcindex_alloc_perfect_hash(struct tcindex_data *cp)
+static int tcindex_alloc_perfect_hash(struct net *net, struct tcindex_data *cp)
 {
 	int i, err = 0;
 
@@ -293,6 +285,9 @@ static int tcindex_alloc_perfect_hash(st
 				    TCA_TCINDEX_ACT, TCA_TCINDEX_POLICE);
 		if (err < 0)
 			goto errout;
+#ifdef CONFIG_NET_CLS_ACT
+		cp->perfect[i].exts.net = net;
+#endif
 	}
 
 	return 0;
@@ -341,7 +336,7 @@ tcindex_set_parms(struct net *net, struc
 	if (p->perfect) {
 		int i;
 
-		if (tcindex_alloc_perfect_hash(cp) < 0)
+		if (tcindex_alloc_perfect_hash(net, cp) < 0)
 			goto errout;
 		for (i = 0; i < cp->hash; i++)
 			cp->perfect[i].res = p->perfect[i].res;
@@ -410,7 +405,7 @@ tcindex_set_parms(struct net *net, struc
 	err = -ENOMEM;
 	if (!cp->perfect && !cp->h) {
 		if (valid_perfect_hash(cp)) {
-			if (tcindex_alloc_perfect_hash(cp) < 0)
+			if (tcindex_alloc_perfect_hash(net, cp) < 0)
 				goto errout_alloc;
 			balloc = 1;
 		} else {
@@ -566,13 +561,32 @@ static void tcindex_destroy(struct tcf_p
 			    struct netlink_ext_ack *extack)
 {
 	struct tcindex_data *p = rtnl_dereference(tp->root);
-	struct tcf_walker walker;
+	int i;
 
 	pr_debug("tcindex_destroy(tp %p),p %p\n", tp, p);
-	walker.count = 0;
-	walker.skip = 0;
-	walker.fn = tcindex_destroy_element;
-	tcindex_walk(tp, &walker);
+
+	if (p->perfect) {
+		for (i = 0; i < p->hash; i++) {
+			struct tcindex_filter_result *r = p->perfect + i;
+
+			tcf_unbind_filter(tp, &r->res);
+			if (tcf_exts_get_net(&r->exts))
+				tcf_queue_work(&r->rwork,
+					       tcindex_destroy_rexts_work);
+			else
+				__tcindex_destroy_rexts(r);
+		}
+	}
+
+	for (i = 0; p->h && i < p->hash; i++) {
+		struct tcindex_filter *f, *next;
+		bool last;
+
+		for (f = rtnl_dereference(p->h[i]); f; f = next) {
+			next = rtnl_dereference(f->next);
+			tcindex_delete(tp, &f->result, &last, NULL);
+		}
+	}
 
 	tcf_queue_work(&p->rwork, tcindex_destroy_work);
 }
author maintainer
#118 lore raw

PATCH 117/152 net_sched: fix two more memory leaks in cls_tcindex

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cong Wang <[email protected]>

[ Upstream commit 1db817e75f5b9387b8db11e37d5f0624eb9223e0 ]

struct tcindex_filter_result contains two parts:
struct tcf_exts and struct tcf_result.

For the local variable 'cr', its exts part is never used but initialized without being released properly on success path. So just completely remove the exts part to fix this leak.

For the local variable 'new_filter_result', it is never properly released if not used by 'r' on success path.

---
 net/sched/cls_tcindex.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)
net/sched/cls_tcindex.c +7 -9
@@ -304,9 +304,9 @@ tcindex_set_parms(struct net *net, struc
 		  struct nlattr *est, bool ovr, struct netlink_ext_ack *extack)
 {
 	struct tcindex_filter_result new_filter_result, *old_r = r;
-	struct tcindex_filter_result cr;
 	struct tcindex_data *cp = NULL, *oldp;
 	struct tcindex_filter *f = NULL; /* make gcc behave */
+	struct tcf_result cr = {};
 	int err, balloc = 0;
 	struct tcf_exts e;
 
@@ -347,11 +347,8 @@ tcindex_set_parms(struct net *net, struc
 	err = tcindex_filter_result_init(&new_filter_result);
 	if (err < 0)
 		goto errout1;
-	err = tcindex_filter_result_init(&cr);
-	if (err < 0)
-		goto errout1;
 	if (old_r)
-		cr.res = r->res;
+		cr = r->res;
 
 	if (tb[TCA_TCINDEX_HASH])
 		cp->hash = nla_get_u32(tb[TCA_TCINDEX_HASH]);
@@ -442,8 +439,8 @@ tcindex_set_parms(struct net *net, struc
 	}
 
 	if (tb[TCA_TCINDEX_CLASSID]) {
-		cr.res.classid = nla_get_u32(tb[TCA_TCINDEX_CLASSID]);
-		tcf_bind_filter(tp, &cr.res, base);
+		cr.classid = nla_get_u32(tb[TCA_TCINDEX_CLASSID]);
+		tcf_bind_filter(tp, &cr, base);
 	}
 
 	if (old_r && old_r != r) {
@@ -455,7 +452,7 @@ tcindex_set_parms(struct net *net, struc
 	}
 
 	oldp = p;
-	r->res = cr.res;
+	r->res = cr;
 	tcf_exts_change(&r->exts, &e);
 
 	rcu_assign_pointer(tp->root, cp);
@@ -474,6 +471,8 @@ tcindex_set_parms(struct net *net, struc
 				; /* nothing */
 
 		rcu_assign_pointer(*fp, f);
+	} else {
+		tcf_exts_destroy(&new_filter_result.exts);
 	}
 
 	if (oldp)
@@ -486,7 +485,6 @@ errout_alloc:
 	else if (balloc == 2)
 		kfree(cp->h);
 errout1:
-	tcf_exts_destroy(&cr.exts);
 	tcf_exts_destroy(&new_filter_result.exts);
 errout:
 	kfree(cp);
author maintainer
#119 lore raw

PATCH 118/152 net/mlx5e: XDP, fix redirect resources availability check

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Saeed Mahameed <[email protected]>

[ Upstream commit 407e17b1a69a51ba9a512a04342da56c1f931df4 ]

Currently mlx5 driver creates xdp redirect hw queues unconditionally on netdevice open, This is great until someone starts redirecting XDP traffic via ndo_xdp_xmit on mlx5 device and changes the device configuration at the same time, this might cause crashes, since the other device's napi is not aware of the mlx5 state change (resources un-availability).

To fix this we must synchronize with other devices napi's on the system. Added a new flag under mlx5e_priv to determine XDP TX resources are available, set/clear it up when necessary and use synchronize_rcu() when the flag is turned off, so other napi's are in-sync with it, before we actually cleanup the hw resources.

The flag is tested prior to committing to transmit on mlx5e_xdp_xmit, and it is sufficient to determine if it safe to transmit or not. The other two internal flags (MLX5E_STATE_OPENED and MLX5E_SQ_STATE_ENABLED) become unnecessary. Thus, they are removed from data path.

Fixes 58b99ee3e3eb ("net/mlx5e: Add support for XDP_REDIRECT in device-out side")
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h      |    1 +
 drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c  |    6 ++----
 drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h  |   17 +++++++++++++++++
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c |    2 ++
 4 files changed, 22 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +1 -0
@@ -633,6 +633,7 @@ enum {
 	MLX5E_STATE_ASYNC_EVENTS_ENABLED,
 	MLX5E_STATE_OPENED,
 	MLX5E_STATE_DESTROYING,
+	MLX5E_STATE_XDP_TX_ENABLED,
 };
 
 struct mlx5e_rqt {
drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c +2 -4
@@ -262,7 +262,8 @@ int mlx5e_xdp_xmit(struct net_device *de
 	int sq_num;
 	int i;
 
-	if (unlikely(!test_bit(MLX5E_STATE_OPENED, &priv->state)))
+	/* this flag is sufficient, no need to test internal sq state */
+	if (unlikely(!mlx5e_xdp_tx_is_enabled(priv)))
 		return -ENETDOWN;
 
 	if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
@@ -275,9 +276,6 @@ int mlx5e_xdp_xmit(struct net_device *de
 
 	sq = &priv->channels.c[sq_num]->xdpsq;
 
-	if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &sq->state)))
-		return -ENETDOWN;
-
 	for (i = 0; i < n; i++) {
 		struct xdp_frame *xdpf = frames[i];
 		struct mlx5e_xdp_info xdpi;
drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h +17 -0
@@ -49,6 +49,23 @@ bool mlx5e_xmit_xdp_frame(struct mlx5e_x
 int mlx5e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames,
 		   u32 flags);
 
+static inline void mlx5e_xdp_tx_enable(struct mlx5e_priv *priv)
+{
+	set_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state);
+}
+
+static inline void mlx5e_xdp_tx_disable(struct mlx5e_priv *priv)
+{
+	clear_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state);
+	/* let other device's napi(s) see our new state */
+	synchronize_rcu();
+}
+
+static inline bool mlx5e_xdp_tx_is_enabled(struct mlx5e_priv *priv)
+{
+	return test_bit(MLX5E_STATE_XDP_TX_ENABLED, &priv->state);
+}
+
 static inline void mlx5e_xmit_xdp_doorbell(struct mlx5e_xdpsq *sq)
 {
 	struct mlx5_wq_cyc *wq = &sq->wq;
drivers/net/ethernet/mellanox/mlx5/core/en_main.c +2 -0
@@ -2890,6 +2890,7 @@ void mlx5e_activate_priv_channels(struct
 
 	mlx5e_build_tx2sq_maps(priv);
 	mlx5e_activate_channels(&priv->channels);
+	mlx5e_xdp_tx_enable(priv);
 	netif_tx_start_all_queues(priv->netdev);
 
 	if (MLX5_ESWITCH_MANAGER(priv->mdev))
@@ -2911,6 +2912,7 @@ void mlx5e_deactivate_priv_channels(stru
 	 */
 	netif_tx_stop_all_queues(priv->netdev);
 	netif_tx_disable(priv->netdev);
+	mlx5e_xdp_tx_disable(priv);
 	mlx5e_deactivate_channels(&priv->channels);
 }
 
author maintainer
#120 lore raw

PATCH 119/152 RDMA/srp: Rework SCSI device reset handling

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <[email protected]>

commit 48396e80fb6526ea5ed267bd84f028bae56d2f9e upstream.

Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000138
CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G    B             5.0.0-rc1-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Workqueue: kblockd blk_mq_run_work_fn
RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10
Call Trace:
 blk_mq_sched_dispatch_requests+0x2f7/0x300
 __blk_mq_run_hw_queue+0xd6/0x180
 blk_mq_run_work_fn+0x27/0x30
 process_one_work+0x4f1/0xa20
 worker_thread+0x67/0x5b0
 kthread+0x1cf/0x1f0
 ret_from_fork+0x24/0x30
Fixes 94a9174c630c ("IB/srp: reduce lock coverage of command completion")
---
 drivers/infiniband/ulp/srp/ib_srp.c |   10 ----------
 1 file changed, 10 deletions(-)
drivers/infiniband/ulp/srp/ib_srp.c +0 -10
@@ -2951,7 +2951,6 @@ static int srp_reset_device(struct scsi_
 {
 	struct srp_target_port *target = host_to_target(scmnd->device->host);
 	struct srp_rdma_ch *ch;
-	int i, j;
 	u8 status;
 
 	shost_printk(KERN_ERR, target->scsi_host, "SRP reset_device called\n");
@@ -2963,15 +2962,6 @@ static int srp_reset_device(struct scsi_
 	if (status)
 		return FAILED;
 
-	for (i = 0; i < target->ch_count; i++) {
-		ch = &target->ch[i];
-		for (j = 0; j < target->req_ring_size; ++j) {
-			struct srp_request *req = &ch->req_ring[j];
-
-			srp_finish_req(ch, req, scmnd->device, DID_RESET << 16);
-		}
-	}
-
 	return SUCCESS;
 }
 
author maintainer
#121 lore raw

PATCH 120/152 KEYS: user: Align the payload buffer

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers <[email protected]>

commit cc1780fc42c76c705dd07ea123f1143dc5057630 upstream.

Align the payload of "user" and "logon" keys so that users of the keyrings service can access it as a struct that requires more than 2-byte alignment. fscrypt currently does this which results in the read of fscrypt_key::size being misaligned as it needs 4-byte alignment.

Align to __alignof__(u64) rather than __alignof__(long) since in the future it's conceivable that people would use structs beginning with u64, which on some platforms would require more than 'long' alignment.

Fixes 2aa349f6e37c ("[PATCH] Keys: Export user-defined keyring operations")
Fixes 88bd6ccdcdd6 ("ext4 crypto: add encryption key management facilities")
---
 include/keys/user-type.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/keys/user-type.h +1 -1
@@ -31,7 +31,7 @@
 struct user_key_payload {
 	struct rcu_head	rcu;		/* RCU destructor */
 	unsigned short	datalen;	/* length of this data */
-	char		data[0];	/* actual data */
+	char		data[0] __aligned(__alignof__(u64)); /* actual data */
 };
 
 extern struct key_type key_type_user;
author maintainer
#122 lore raw

PATCH 121/152 KEYS: always initialize keyring_index_key::desc_len

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers <[email protected]>

commit ede0fa98a900e657d1fcd80b50920efc896c1a4c upstream.

syzbot hit the 'BUG_ON(index_key->desc_len == 0);' in __key_link_begin() called from construct_alloc_key() during sys_request_key(), because the length of the key description was never calculated.

The problem is that we rely on ->desc_len being initialized by search_process_keyrings(), specifically by search_nested_keyrings(). But, if the process isn't subscribed to any keyrings that never happens.

Fix it by always initializing keyring_index_key::desc_len as soon as the description is set, like we already do in some places.

The following program reproduces the BUG_ON() when it's run as root and no session keyring has been installed. If it doesn't work, try removing pam_keyinit.so from /etc/pam.d/login and rebooting.

    #include <stdlib.h>
    #include <unistd.h>
    #include <keyutils.h>

    int main(void)
    {
            int id = add_key("keyring", "syz", NULL, 0, KEY_SPEC_USER_KEYRING);

            keyctl_setperm(id, KEY_OTH_WRITE);
            setreuid(5000, 5000);
            request_key("user", "desc", "", id);
    }
Reported-by [email protected]
Fixes b2a4df200d57 ("KEYS: Expand the capacity of a keyring")
---
 security/keys/keyring.c          |    4 +---
 security/keys/proc.c             |    3 +--
 security/keys/request_key.c      |    1 +
 security/keys/request_key_auth.c |    2 +-
 4 files changed, 4 insertions(+), 6 deletions(-)
security/keys/keyring.c +1 -3
@@ -661,9 +661,6 @@ static bool search_nested_keyrings(struc
 	BUG_ON((ctx->flags & STATE_CHECKS) == 0 ||
 	       (ctx->flags & STATE_CHECKS) == STATE_CHECKS);
 
-	if (ctx->index_key.description)
-		ctx->index_key.desc_len = strlen(ctx->index_key.description);
-
 	/* Check to see if this top-level keyring is what we are looking for
 	 * and whether it is valid or not.
 	 */
@@ -914,6 +911,7 @@ key_ref_t keyring_search(key_ref_t keyri
 	struct keyring_search_context ctx = {
 		.index_key.type		= type,
 		.index_key.description	= description,
+		.index_key.desc_len	= strlen(description),
 		.cred			= current_cred(),
 		.match_data.cmp		= key_default_cmp,
 		.match_data.raw_data	= description,
security/keys/proc.c +1 -2
@@ -166,8 +166,7 @@ static int proc_keys_show(struct seq_fil
 	int rc;
 
 	struct keyring_search_context ctx = {
-		.index_key.type		= key->type,
-		.index_key.description	= key->description,
+		.index_key		= key->index_key,
 		.cred			= m->file->f_cred,
 		.match_data.cmp		= lookup_user_key_possessed,
 		.match_data.raw_data	= key,
security/keys/request_key.c +1 -0
@@ -545,6 +545,7 @@ struct key *request_key_and_link(struct
 	struct keyring_search_context ctx = {
 		.index_key.type		= type,
 		.index_key.description	= description,
+		.index_key.desc_len	= strlen(description),
 		.cred			= current_cred(),
 		.match_data.cmp		= key_default_cmp,
 		.match_data.raw_data	= description,
security/keys/request_key_auth.c +1 -1
@@ -246,7 +246,7 @@ struct key *key_get_instantiation_authke
 	struct key *authkey;
 	key_ref_t authkey_ref;
 
-	sprintf(description, "%x", target_id);
+	ctx.index_key.desc_len = sprintf(description, "%x", target_id);
 
 	authkey_ref = search_process_keyrings(&ctx);
 
author maintainer
#123 lore raw

PATCH 122/152 parisc: Fix ptrace syscall number modification

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dmitry V. Levin <[email protected]>

commit b7dc5a071ddf69c0350396b203cba32fe5bab510 upstream.

Commit 910cd32e552e ("parisc: Fix and enable seccomp filter support") introduced a regression in ptrace-based syscall tampering: when tracer changes syscall number to -1, the kernel fails to initialize %r28 with -ENOSYS and subsequently fails to return the error code of the failed syscall to userspace.

This erroneous behaviour could be observed with a simple strace syscall fault injection command which is expected to print something like this:

$ strace -a0 -ewrite -einject=write:error=enospc echo hello
write(1, "hello\n", 6) = -1 ENOSPC (No space left on device) (INJECTED)
write(2, "echo: ", 6) = -1 ENOSPC (No space left on device) (INJECTED)
write(2, "write error", 11) = -1 ENOSPC (No space left on device) (INJECTED)
write(2, "\n", 1) = -1 ENOSPC (No space left on device) (INJECTED)
+++ exited with 1 +++

After commit 910cd32e552ea09caa89cdbe328e468979b030dd it loops printing something like this instead:

write(1, "hello\n", 6../strace: Failed to tamper with process 12345: unexpectedly got no error (return value 0, error 0) ) = 0 (INJECTED)

This bug was found by strace test suite.

Fixes 910cd32e552e ("parisc: Fix and enable seccomp filter support")
---
 arch/parisc/kernel/ptrace.c |   29 +++++++++++++++++++++--------
 1 file changed, 21 insertions(+), 8 deletions(-)
arch/parisc/kernel/ptrace.c +21 -8
@@ -308,15 +308,29 @@ long compat_arch_ptrace(struct task_stru
 
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(regs)) {
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		int rc = tracehook_report_syscall_entry(regs);
+
 		/*
-		 * Tracing decided this syscall should not happen or the
-		 * debugger stored an invalid system call number. Skip
-		 * the system call and the system call restart handling.
+		 * As tracesys_next does not set %r28 to -ENOSYS
+		 * when %r20 is set to -1, initialize it here.
 		 */
-		regs->gr[20] = -1UL;
-		goto out;
+		regs->gr[28] = -ENOSYS;
+
+		if (rc) {
+			/*
+			 * A nonzero return code from
+			 * tracehook_report_syscall_entry() tells us
+			 * to prevent the syscall execution.  Skip
+			 * the syscall call and the syscall restart handling.
+			 *
+			 * Note that the tracer may also just change
+			 * regs->gr[20] to an invalid syscall number,
+			 * that is handled by tracesys_next.
+			 */
+			regs->gr[20] = -1UL;
+			return -1;
+		}
 	}
 
 	/* Do the secure computing check after ptrace. */
@@ -340,7 +354,6 @@ long do_syscall_trace_enter(struct pt_re
 			regs->gr[24] & 0xffffffff,
 			regs->gr[23] & 0xffffffff);
 
-out:
 	/*
 	 * Sign extend the syscall number to 64bit since it may have been
 	 * modified by a compat ptrace call
author maintainer
#124 lore raw

PATCH 123/152 ARCv2: Enable unaligned access in early ASM code

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eugeniy Paltsev <[email protected]>

commit 252f6e8eae909bc075a1b1e3b9efb095ae4c0b56 upstream.

It is currently done in arc_init_IRQ() which might be too late considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned memory accesses by default

---
 arch/arc/kernel/head.S |   10 ++++++++++
 1 file changed, 10 insertions(+)
arch/arc/kernel/head.S +10 -0
@@ -17,6 +17,7 @@
 #include <asm/entry.h>
 #include <asm/arcregs.h>
 #include <asm/cache.h>
+#include <asm/irqflags.h>
 
 .macro CPU_EARLY_SETUP
 
@@ -47,6 +48,15 @@
 	sr	r5, [ARC_REG_DC_CTRL]
 
 1:
+
+#ifdef CONFIG_ISA_ARCV2
+	; Unaligned access is disabled at reset, so re-enable early as
+	; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
+	; by default
+	lr	r5, [status32]
+	bset	r5, r5, STATUS_AD_BIT
+	kflag	r5
+#endif
 .endm
 
 	.section .init.text, "ax",@progbits
author maintainer
#125 lore raw

PATCH 124/152 ARC: U-boot: check arguments paranoidly

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eugeniy Paltsev <[email protected]>

commit a66f2e57bd566240d8b3884eedf503928fbbe557 upstream.

Handle U-boot arguments paranoidly:
* don't allow to pass unknown tag.
* try to use external device tree blob only if corresponding tag (TAG_DTB) is set.
* don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT.

NOTE:
If U-boot args are invalid we skip them and try to use embedded device tree blob. We can't panic on invalid U-boot args as we really pass invalid args due to bug in U-boot code.
This happens if we don't provide external DTB to U-boot and don't set 'bootargs' U-boot environment variable (which is default case at least for HSDK board) In that case we will pass
{r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid.

While I'm at it refactor U-boot arguments handling code.

---
 arch/arc/kernel/head.S  |    4 +-
 arch/arc/kernel/setup.c |   89 +++++++++++++++++++++++++++++++++---------------
 2 files changed, 65 insertions(+), 28 deletions(-)
arch/arc/kernel/head.S +2 -2
@@ -103,9 +103,9 @@ ENTRY(stext)
 #ifdef CONFIG_ARC_UBOOT_SUPPORT
 	; Uboot - kernel ABI
 	;    r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
-	;    r1 = magic number (board identity, unused as of now
+	;    r1 = magic number (always zero as of now)
 	;    r2 = pointer to uboot provided cmdline or external DTB in mem
-	; These are handled later in setup_arch()
+	; These are handled later in handle_uboot_args()
 	st	r0, [@uboot_tag]
 	st	r2, [@uboot_arg]
 #endif
arch/arc/kernel/setup.c +63 -26

106 lines not on this page · raw message

author maintainer
#126 lore raw

PATCH 125/152 ARC: define ARCH_SLAB_MINALIGN = 8

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexey Brodkin <[email protected]>

commit b6835ea77729e7faf4656ca637ba53f42b8ee3fd upstream.

The default value of ARCH_SLAB_MINALIGN in "include/linux/slab.h" is "__alignof__(unsigned long long)" which for ARC unexpectedly turns out to be 4. This is not a compiler bug, but as defined by ARC ABI [1]

Thus slab allocator would allocate a struct which is 32-bit aligned, which is generally OK even if struct has long long members. There was however potetial problem when it had any atomic64_t which use LLOCKD/SCONDD instructions which are required by ISA to take 64-bit addresses. This is the problem we ran into

[    4.015732] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.167881] Misaligned Access
[    4.172356] Path: /bin/busybox.nosuid
[    4.176004] CPU: 2 PID: 171 Comm: rm Not tainted 4.19.14-yocto-standard #1
[    4.182851]
[    4.182851] [ECR   ]: 0x000d0000 => Check Programmer's Manual
[    4.190061] [EFA   ]: 0xbeaec3fc
[    4.190061] [BLINK ]: ext4_delete_entry+0x210/0x234
[    4.190061] [ERET  ]: ext4_delete_entry+0x13e/0x234
[    4.202985] [STAT32]: 0x80080002 : IE K
[    4.207236] BTA: 0x9009329c   SP: 0xbe5b1ec4  FP: 0x00000000
[    4.212790] LPS: 0x9074b118  LPE: 0x9074b120 LPC: 0x00000000
[    4.218348] r00: 0x00000040  r01: 0x00000021 r02: 0x00000001
...
...
[    4.270510] Stack Trace:
[    4.274510]   ext4_delete_entry+0x13e/0x234
[    4.278695]   ext4_rmdir+0xe0/0x238
[    4.282187]   vfs_rmdir+0x50/0xf0
[    4.285492]   do_rmdir+0x9e/0x154
[    4.288802]   EV_Trap+0x110/0x114

The fix is to make sure slab allocations are 64-bit aligned.

Do note that atomic64_t is __attribute__((aligned(8)) which means gcc does generate 64-bit aligned references, relative to beginning of container struct. However the issue is if the container itself is not 64-bit aligned, atomic64_t ends up unaligned which is what this patch ensures.

[1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/wiki/files/ARCv2_ABI.pdf

Cc <[email protected]> # 4.8+
[vgupta: reworked changelog, added dependency on LL64+LLSC]
---
 arch/arc/include/asm/cache.h |   11 +++++++++++
 1 file changed, 11 insertions(+)
arch/arc/include/asm/cache.h +11 -0
@@ -52,6 +52,17 @@
 #define cache_line_size()	SMP_CACHE_BYTES
 #define ARCH_DMA_MINALIGN	SMP_CACHE_BYTES
 
+/*
+ * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses
+ * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit
+ * alignment for any atomic64_t embedded in buffer.
+ * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed
+ * value of 4 (and not 8) in ARC ABI.
+ */
+#if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC)
+#define ARCH_SLAB_MINALIGN	8
+#endif
+
 extern void arc_cache_init(void);
 extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
 extern void read_decode_cache_bcr(void);
author maintainer
#127 lore raw

PATCH 126/152 drm/amdgpu: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Deucher <[email protected]>

commit d33158530660bc89be3cc870a2152e4e9a76cac7 upstream.

Based on a similar patch from Rafael for radeon.

When using ATPX to control dGPU power, the state is not retained across suspend and resume cycles by default. This can probably be loosened for Hybrid Graphics (_PR3) laptops where I think the state is properly retained.

Fixes c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks")
Cc Rafael J. Wysocki <[email protected]>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c |    1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +1 -0
@@ -159,6 +159,7 @@ int amdgpu_driver_load_kms(struct drm_de
 	}
 
 	if (amdgpu_device_is_px(dev)) {
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
author maintainer
#128 lore raw

PATCH 127/152 gpu: drm: radeon: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <[email protected]>

commit 450d007d199e632a1a4c4b91302deacd7d56815f upstream.

On HP ProBook 4540s, if PM-runtime is enabled in the radeon driver and the direct-complete optimization is used for the radeon device during system-wide suspend, the system doesn't resume.

Preventing direct-complete from being used with the radeon device by setting the DPM_FLAG_NEVER_SKIP driver flag for it makes the problem go away, which indicates that direct-complete is not safe for the radeon driver in general and should not be used with it (at least for now).

This fixes a regression introduced by commit c62ec4610c40 ("PM / core: Fix direct_complete handling for devices with no callbacks") which allowed direct-complete to be applied to devices without PM callbacks (again) which in turn unlocked direct-complete for radeon on HP ProBook 4540s.

---
 drivers/gpu/drm/radeon/radeon_kms.c |    1 +
 1 file changed, 1 insertion(+)
drivers/gpu/drm/radeon/radeon_kms.c +1 -0
@@ -172,6 +172,7 @@ int radeon_driver_load_kms(struct drm_de
 	}
 
 	if (radeon_is_px(dev)) {
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
author maintainer
#129 lore raw

PATCH 128/152 drm/i915/fbdev: Actually configure untiled displays

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chris Wilson <[email protected]>

commit d179b88deb3bf6fed4991a31fd6f0f2cad21fab5 upstream.

If we skipped all the connectors that were not part of a tile, we would leave conn_seq=0 and conn_configured=0, convincing ourselves that we had stagnated in our configuration attempts. Avoid this situation by starting conn_seq=ALL_CONNECTORS, and repeating until we find no more connectors to configure.

Fixes 754a76591b12 ("drm/i915/fbdev: Stop repeating tile configuration on stagnation")
Cc Maarten Lankhorst <[email protected]>
Cc <[email protected]> # v3.19+
(cherry picked from commit d9b308b1f8a1acc0c3279f443d4fe0f9f663252e)
---
 drivers/gpu/drm/i915/intel_fbdev.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_fbdev.c +7 -5
@@ -334,8 +334,8 @@ static bool intel_fb_initial_config(stru
 				    bool *enabled, int width, int height)
 {
 	struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
-	unsigned long conn_configured, conn_seq, mask;
 	unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
+	unsigned long conn_configured, conn_seq;
 	int i, j;
 	bool *save_enabled;
 	bool fallback = true, ret = true;
@@ -353,10 +353,9 @@ static bool intel_fb_initial_config(stru
 		drm_modeset_backoff(&ctx);
 
 	memcpy(save_enabled, enabled, count);
-	mask = GENMASK(count - 1, 0);
+	conn_seq = GENMASK(count - 1, 0);
 	conn_configured = 0;
 retry:
-	conn_seq = conn_configured;
 	for (i = 0; i < count; i++) {
 		struct drm_fb_helper_connector *fb_conn;
 		struct drm_connector *connector;
@@ -369,7 +368,8 @@ retry:
 		if (conn_configured & BIT(i))
 			continue;
 
-		if (conn_seq == 0 && !connector->has_tile)
+		/* First pass, only consider tiled connectors */
+		if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
 			continue;
 
 		if (connector->status == connector_status_connected)
@@ -473,8 +473,10 @@ retry:
 		conn_configured |= BIT(i);
 	}
 
-	if ((conn_configured & mask) != mask && conn_configured != conn_seq)
+	if (conn_configured != conn_seq) { /* repeat until no more are found */
+		conn_seq = conn_configured;
 		goto retry;
+	}
 
 	/*
 	 * If the BIOS didn't enable everything it could, fall back to have the
author maintainer
#130 lore raw

PATCH 129/152 drm/amd/display: Fix MST reboot/poweroff sequence

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leo (Hanghong) Ma <[email protected]>

commit d2f0b53bda3193874f3905bc839888f895d1c0cf upstream.

[Why]

drm_dp_mst_topology_mgr_suspend() is added into the new reboot sequence, which disables the UP request at the beginning. Therefore sideband messages are blocked.

[How]

Finish MST sideband message transaction before UP request is suppressed.

---
 drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +3 -2
@@ -624,12 +624,13 @@ static int dm_suspend(void *handle)
 	struct amdgpu_display_manager *dm = &adev->dm;
 	int ret = 0;
 
+	WARN_ON(adev->dm.cached_state);
+	adev->dm.cached_state = drm_atomic_helper_suspend(adev->ddev);
+
 	s3_handle_mst(adev->ddev, true);
 
 	amdgpu_dm_irq_suspend(adev);
 
-	WARN_ON(adev->dm.cached_state);
-	adev->dm.cached_state = drm_atomic_helper_suspend(adev->ddev);
 
 	dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D3);
 
author maintainer
#131 lore raw

PATCH 130/152 mac80211: allocate tailroom for forwarded mesh packets

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <[email protected]>

commit 51d0af222f6fa43134c6187ab4f374630f6e0d96 upstream.

Forwarded packets enter the tx path through ieee80211_add_pending_skb, which skips the ieee80211_skb_resize call.
Fixes WARN_ON in ccmp_encrypt_skb and resulting packet loss.

---
 net/mac80211/rx.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
net/mac80211/rx.c +6 -1
@@ -2598,6 +2598,7 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
 	struct ieee80211_sub_if_data *sdata = rx->sdata;
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	u16 ac, q, hdrlen;
+	int tailroom = 0;
 
 	hdr = (struct ieee80211_hdr *) skb->data;
 	hdrlen = ieee80211_hdrlen(hdr->frame_control);
@@ -2684,8 +2685,12 @@ ieee80211_rx_h_mesh_fwding(struct ieee80
 	if (!ifmsh->mshcfg.dot11MeshForwarding)
 		goto out;
 
+	if (sdata->crypto_tx_tailroom_needed_cnt)
+		tailroom = IEEE80211_ENCRYPT_TAILROOM;
+
 	fwd_skb = skb_copy_expand(skb, local->tx_headroom +
-				       sdata->encrypt_headroom, 0, GFP_ATOMIC);
+				       sdata->encrypt_headroom,
+				  tailroom, GFP_ATOMIC);
 	if (!fwd_skb)
 		goto out;
 
author maintainer
#132 lore raw

PATCH 131/152 kvm: x86: Return LA57 feature based on hardware capability

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yu Zhang <[email protected]>

commit 511da98d207d5c0675a10351b01e37cbe50a79e5 upstream.

Previously, 'commit 372fddf70904 ("x86/mm: Introduce the 'no5lvl' kernel parameter")' cleared X86_FEATURE_LA57 in boot_cpu_data, if Linux chooses to not run in 5-level paging mode. Yet boot_cpu_data is queried by do_cpuid_ent() as the host capability later when creating vcpus, and Qemu will not be able to detect this feature and create VMs with LA57 feature.

As discussed earlier, VMs can still benefit from extended linear address width, e.g. to enhance features like ASLR. So we would like to fix this, by return the true hardware capability when Qemu queries.

---
 arch/x86/kvm/cpuid.c |    4 ++++
 1 file changed, 4 insertions(+)
arch/x86/kvm/cpuid.c +4 -0
@@ -337,6 +337,7 @@ static inline int __do_cpuid_ent(struct
 	unsigned f_mpx = kvm_mpx_supported() ? F(MPX) : 0;
 	unsigned f_xsaves = kvm_x86_ops->xsaves_supported() ? F(XSAVES) : 0;
 	unsigned f_umip = kvm_x86_ops->umip_emulated() ? F(UMIP) : 0;
+	unsigned f_la57 = 0;
 
 	/* cpuid 1.edx */
 	const u32 kvm_cpuid_1_edx_x86_features =
@@ -491,7 +492,10 @@ static inline int __do_cpuid_ent(struct
 			// TSC_ADJUST is emulated
 			entry->ebx |= F(TSC_ADJUST);
 			entry->ecx &= kvm_cpuid_7_0_ecx_x86_features;
+			f_la57 = entry->ecx & F(LA57);
 			cpuid_mask(&entry->ecx, CPUID_7_ECX);
+			/* Set LA57 based on hardware capability. */
+			entry->ecx |= f_la57;
 			entry->ecx |= f_umip;
 			/* PKU is not yet implemented for shadow paging. */
 			if (!tdp_enabled || !boot_cpu_has(X86_FEATURE_OSPKE))
author maintainer
#133 lore raw

PATCH 132/152 net: validate untrusted gso packets without csum offload

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <[email protected]>

commit d5be7f632bad0f489879eed0ff4b99bd7fe0b74c upstream.

Syzkaller again found a path to a kernel crash through bad gso input. By building an excessively large packet to cause an skb field to wrap.

If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in skb_partial_csum_set.

GSO packets that do not set checksum offload are suspicious and rare. Most callers of virtio_net_hdr_to_skb already pass them to skb_probe_transport_header.

Move that test forward, change it to detect parse failure and drop packets on failure as those cleary are not one of the legitimate VIRTIO_NET_HDR_GSO types.

Fixes bfd5f4a3d605 ("packet: Add GSO/csum offload support.")
Fixes f43798c27684 ("tun: Allow GSO using virtio_net_hdr")
---
 include/linux/skbuff.h     |    2 +-
 include/linux/virtio_net.h |    9 +++++++++
 2 files changed, 10 insertions(+), 1 deletion(-)
include/linux/skbuff.h +1 -1
@@ -2392,7 +2392,7 @@ static inline void skb_probe_transport_h
 
 	if (skb_flow_dissect_flow_keys_basic(skb, &keys, NULL, 0, 0, 0, 0))
 		skb_set_transport_header(skb, keys.control.thoff);
-	else
+	else if (offset_hint >= 0)
 		skb_set_transport_header(skb, offset_hint);
 }
 
include/linux/virtio_net.h +9 -0
@@ -57,6 +57,15 @@ static inline int virtio_net_hdr_to_skb(
 
 		if (!skb_partial_csum_set(skb, start, off))
 			return -EINVAL;
+	} else {
+		/* gso packets without NEEDS_CSUM do not set transport_offset.
+		 * probe and drop if does not match one of the above types.
+		 */
+		if (gso_type) {
+			skb_probe_transport_header(skb, -1);
+			if (!skb_transport_header_was_set(skb))
+				return -EINVAL;
+		}
 	}
 
 	if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
author maintainer
#134 lore raw

PATCH 133/152 net: avoid false positives in untrusted gso validation

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Willem de Bruijn <[email protected]>

commit 9e8db5913264d3967b93c765a6a9e464d9c473db upstream.

GSO packets with vnet_hdr must conform to a small set of gso_types. The below commit uses flow dissection to drop packets that do not.

But it has false positives when the skb is not fully initialized. Dissection needs skb->protocol and skb->network_header.

Infer skb->protocol from gso_type as the two must agree. SKB_GSO_UDP can use both ipv4 and ipv6, so try both.

Exclude callers for which network header offset is not known.

Fixes d5be7f632bad ("net: validate untrusted gso packets without csum offload")
---
 include/linux/virtio_net.h |   14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
include/linux/virtio_net.h +12 -2
@@ -61,10 +61,20 @@ static inline int virtio_net_hdr_to_skb(
 		/* gso packets without NEEDS_CSUM do not set transport_offset.
 		 * probe and drop if does not match one of the above types.
 		 */
-		if (gso_type) {
+		if (gso_type && skb->network_header) {
+			if (!skb->protocol)
+				virtio_net_hdr_set_proto(skb, hdr);
+retry:
 			skb_probe_transport_header(skb, -1);
-			if (!skb_transport_header_was_set(skb))
+			if (!skb_transport_header_was_set(skb)) {
+				/* UFO does not specify ipv4 or 6: try both */
+				if (gso_type & SKB_GSO_UDP &&
+				    skb->protocol == htons(ETH_P_IP)) {
+					skb->protocol = htons(ETH_P_IPV6);
+					goto retry;
+				}
 				return -EINVAL;
+			}
 		}
 	}
 
author maintainer
#135 lore raw

PATCH 134/152 staging: erofs: fix a bug when appling cache strategy

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit 0734ffbf574ee813b20899caef2fe0ed502bb783 upstream.

As described in Kconfig, the last compressed pack should be cached for further reading for either EROFS_FS_ZIP_CACHE_UNIPOLAR' or EROFS_FS_ZIP_CACHE_BIPOLAR' by design.

However, there is a bug in z_erofs_do_read_page, it will switch initial' to false' at the very beginning before it decides to cache the last compressed pack.

caching strategy should work properly after appling this patch.

---
 drivers/staging/erofs/unzip_vle.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/erofs/unzip_vle.c +1 -1
@@ -624,7 +624,7 @@ repeat:
 	/* go ahead the next map_blocks */
 	debugln("%s: [out-of-range] pos %llu", __func__, offset + cur);
 
-	if (!z_erofs_vle_work_iter_end(builder))
+	if (z_erofs_vle_work_iter_end(builder))
 		fe->initial = false;
 
 	map->m_la = offset + cur;
author maintainer
#136 lore raw

PATCH 135/152 staging: erofs: complete error handing of z_erofs_do_read_page

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit 1e05ff36e6921ca61bdbf779f81a602863569ee3 upstream.

This patch completes error handing code of z_erofs_do_read_page. PG_error will be set when some read error happens, therefore z_erofs_onlinepage_endio will unlock this page without setting PG_uptodate.

---
 drivers/staging/erofs/unzip_vle.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)
drivers/staging/erofs/unzip_vle.c +11 -9
@@ -606,7 +606,7 @@ static int z_erofs_do_read_page(struct z
 
 	enum z_erofs_page_type page_type;
 	unsigned cur, end, spiltted, index;
-	int err;
+	int err = 0;
 
 	/* register locked file pages as online pages in pack */
 	z_erofs_onlinepage_init(page);
@@ -633,12 +633,11 @@ repeat:
 	if (unlikely(err))
 		goto err_out;
 
-	/* deal with hole (FIXME! broken now) */
 	if (unlikely(!(map->m_flags & EROFS_MAP_MAPPED)))
 		goto hitted;
 
 	DBG_BUGON(map->m_plen != 1 << sbi->clusterbits);
-	BUG_ON(erofs_blkoff(map->m_pa));
+	DBG_BUGON(erofs_blkoff(map->m_pa));
 
 	err = z_erofs_vle_work_iter_begin(builder, sb, map, &fe->owned_head);
 	if (unlikely(err))
@@ -683,7 +682,7 @@ retry:
 
 		err = z_erofs_vle_work_add_page(builder,
 			newpage, Z_EROFS_PAGE_TYPE_EXCLUSIVE);
-		if (!err)
+		if (likely(!err))
 			goto retry;
 	}
 
@@ -694,9 +693,10 @@ retry:
 
 	/* FIXME! avoid the last relundant fixup & endio */
 	z_erofs_onlinepage_fixup(page, index, true);
-	++spiltted;
 
-	/* also update nr_pages and increase queued_pages */
+	/* bump up the number of spiltted parts of a page */
+	++spiltted;
+	/* also update nr_pages */
 	work->nr_pages = max_t(pgoff_t, work->nr_pages, index + 1);
 next_part:
 	/* can be used for verification */
@@ -706,16 +706,18 @@ next_part:
 	if (end > 0)
 		goto repeat;
 
+out:
 	/* FIXME! avoid the last relundant fixup & endio */
 	z_erofs_onlinepage_endio(page);
 
 	debugln("%s, finish page: %pK spiltted: %u map->m_llen %llu",
 		__func__, page, spiltted, map->m_llen);
-	return 0;
+	return err;
 
+	/* if some error occurred while processing this page */
 err_out:
-	/* TODO: the missing error handing cases */
-	return err;
+	SetPageError(page);
+	goto out;
 }
 
 static void z_erofs_vle_unzip_kickoff(void *ptr, int bios)
author maintainer
#137 lore raw

PATCH 136/152 staging: erofs: replace BUG_ON with DBG_BUGON in data.c

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen Gong <[email protected]>

commit 9141b60cf6a53c99f8a9309bf8e1c6650a6785c1 upstream.

This patch replace BUG_ON with DBG_BUGON in data.c, and add necessary error handler.

---
 drivers/staging/erofs/data.c |   31 ++++++++++++++++++++-----------
 1 file changed, 20 insertions(+), 11 deletions(-)
drivers/staging/erofs/data.c +20 -11
@@ -25,7 +25,7 @@ static inline void read_endio(struct bio
 		struct page *page = bvec->bv_page;
 
 		/* page is already locked */
-		BUG_ON(PageUptodate(page));
+		DBG_BUGON(PageUptodate(page));
 
 		if (unlikely(err))
 			SetPageError(page);
@@ -91,12 +91,12 @@ static int erofs_map_blocks_flatmode(str
 	struct erofs_map_blocks *map,
 	int flags)
 {
+	int err = 0;
 	erofs_blk_t nblocks, lastblk;
 	u64 offset = map->m_la;
 	struct erofs_vnode *vi = EROFS_V(inode);
 
 	trace_erofs_map_blocks_flatmode_enter(inode, map, flags);
-	BUG_ON(is_inode_layout_compression(inode));
 
 	nblocks = DIV_ROUND_UP(inode->i_size, PAGE_SIZE);
 	lastblk = nblocks - is_inode_layout_inline(inode);
@@ -123,18 +123,27 @@ static int erofs_map_blocks_flatmode(str
 		map->m_plen = inode->i_size - offset;
 
 		/* inline data should locate in one meta block */
-		BUG_ON(erofs_blkoff(map->m_pa) + map->m_plen > PAGE_SIZE);
+		if (erofs_blkoff(map->m_pa) + map->m_plen > PAGE_SIZE) {
+			DBG_BUGON(1);
+			err = -EIO;
+			goto err_out;
+		}
+
 		map->m_flags |= EROFS_MAP_META;
 	} else {
 		errln("internal error @ nid: %llu (size %llu), m_la 0x%llx",
 			vi->nid, inode->i_size, map->m_la);
-		BUG();
+		DBG_BUGON(1);
+		err = -EIO;
+		goto err_out;
 	}
 
 out:
 	map->m_llen = map->m_plen;
+
+err_out:
 	trace_erofs_map_blocks_flatmode_exit(inode, map, flags, 0);
-	return 0;
+	return err;
 }
 
 #ifdef CONFIG_EROFS_FS_ZIP
@@ -190,7 +199,7 @@ static inline struct bio *erofs_read_raw
 	erofs_off_t current_block = (erofs_off_t)page->index;
 	int err;
 
-	BUG_ON(!nblocks);
+	DBG_BUGON(!nblocks);
 
 	if (PageUptodate(page)) {
 		err = 0;
@@ -233,7 +242,7 @@ submit_bio_retry:
 		}
 
 		/* for RAW access mode, m_plen must be equal to m_llen */
-		BUG_ON(map.m_plen != map.m_llen);
+		DBG_BUGON(map.m_plen != map.m_llen);
 
 		blknr = erofs_blknr(map.m_pa);
 		blkoff = erofs_blkoff(map.m_pa);
@@ -243,7 +252,7 @@ submit_bio_retry:
 			void *vsrc, *vto;
 			struct page *ipage;
 
-			BUG_ON(map.m_plen > PAGE_SIZE);
+			DBG_BUGON(map.m_plen > PAGE_SIZE);
 
 			ipage = erofs_get_meta_page(inode->i_sb, blknr, 0);
 
@@ -270,7 +279,7 @@ submit_bio_retry:
 		}
 
 		/* pa must be block-aligned for raw reading */
-		BUG_ON(erofs_blkoff(map.m_pa) != 0);
+		DBG_BUGON(erofs_blkoff(map.m_pa));
 
 		/* max # of continuous pages */
 		if (nblocks > DIV_ROUND_UP(map.m_plen, PAGE_SIZE))
@@ -331,7 +340,7 @@ static int erofs_raw_access_readpage(str
 	if (IS_ERR(bio))
 		return PTR_ERR(bio);
 
-	BUG_ON(bio != NULL);	/* since we have only one bio -- must be NULL */
+	DBG_BUGON(bio);	/* since we have only one bio -- must be NULL */
 	return 0;
 }
 
@@ -369,7 +378,7 @@ static int erofs_raw_access_readpages(st
 		/* pages could still be locked */
 		put_page(page);
 	}
-	BUG_ON(!list_empty(pages));
+	DBG_BUGON(!list_empty(pages));
 
 	/* the rare case (end in gaps) */
 	if (unlikely(bio != NULL))
author maintainer
#138 lore raw

PATCH 137/152 staging: erofs: drop multiref support temporarily

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit e5e3abbadf0dbd1068f64f8abe70401c5a178180 upstream.

Multiref support means that a compressed page could have more than one reference, which is designed for on-disk data deduplication. However, mkfs doesn't support this mode at this moment, and the kernel implementation is also broken.

Let's drop multiref support. If it is fully implemented in the future, it can be reverted later.

---
 drivers/staging/erofs/unzip_vle.c |   40 ++++++--------------------------------
 drivers/staging/erofs/unzip_vle.h |   12 -----------
 2 files changed, 8 insertions(+), 44 deletions(-)
drivers/staging/erofs/unzip_vle.c +7 -33
@@ -293,12 +293,9 @@ z_erofs_vle_work_lookup(struct super_blo
 	*grp_ret = grp = container_of(egrp,
 		struct z_erofs_vle_workgroup, obj);
 
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
 	work = z_erofs_vle_grab_work(grp, pageofs);
+	/* if multiref is disabled, `primary' is always true */
 	primary = true;
-#else
-	BUG();
-#endif
 
 	DBG_BUGON(work->pageofs != pageofs);
 
@@ -365,12 +362,9 @@ z_erofs_vle_work_register(struct super_b
 	struct z_erofs_vle_workgroup *grp = *grp_ret;
 	struct z_erofs_vle_work *work;
 
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
+	/* if multiref is disabled, grp should never be nullptr */
 	BUG_ON(grp != NULL);
-#else
-	if (grp != NULL)
-		goto skip;
-#endif
+
 	/* no available workgroup, let's allocate one */
 	grp = kmem_cache_zalloc(z_erofs_workgroup_cachep, GFP_NOFS);
 	if (unlikely(grp == NULL))
@@ -393,13 +387,7 @@ z_erofs_vle_work_register(struct super_b
 	*hosted = true;
 
 	newgrp = true;
-#ifdef CONFIG_EROFS_FS_ZIP_MULTIREF
-skip:
-	/* currently unimplemented */
-	BUG();
-#else
 	work = z_erofs_vle_grab_primary_work(grp);
-#endif
 	work->pageofs = pageofs;
 
 	mutex_init(&work->lock);
@@ -798,10 +786,8 @@ static int z_erofs_vle_unzip(struct supe
 	const unsigned clusterpages = erofs_clusterpages(sbi);
 
 	struct z_erofs_pagevec_ctor ctor;
-	unsigned nr_pages;
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
-	unsigned sparsemem_pages = 0;
-#endif
+	unsigned int nr_pages;
+	unsigned int sparsemem_pages = 0;
 	struct page *pages_onstack[Z_EROFS_VLE_VMAP_ONSTACK_PAGES];
 	struct page **pages, **compressed_pages, *page;
 	unsigned i, llen;
@@ -813,11 +799,7 @@ static int z_erofs_vle_unzip(struct supe
 	int err;
 
 	might_sleep();
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
 	work = z_erofs_vle_grab_primary_work(grp);
-#else
-	BUG();
-#endif
 	BUG_ON(!READ_ONCE(work->nr_pages));
 
 	mutex_lock(&work->lock);
@@ -868,13 +850,11 @@ repeat:
 			pagenr = z_erofs_onlinepage_index(page);
 
 		BUG_ON(pagenr >= nr_pages);
-
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
 		BUG_ON(pages[pagenr] != NULL);
-		++sparsemem_pages;
-#endif
+
 		pages[pagenr] = page;
 	}
+	sparsemem_pages = i;
 
 	z_erofs_pagevec_ctor_exit(&ctor, true);
 
@@ -904,10 +884,8 @@ repeat:
 		pagenr = z_erofs_onlinepage_index(page);
 
 		BUG_ON(pagenr >= nr_pages);
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
 		BUG_ON(pages[pagenr] != NULL);
 		++sparsemem_pages;
-#endif
 		pages[pagenr] = page;
 
 		overlapped = true;
@@ -933,12 +911,10 @@ repeat:
 	if (err != -ENOTSUPP)
 		goto out_percpu;
 
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
 	if (sparsemem_pages >= nr_pages) {
 		BUG_ON(sparsemem_pages > nr_pages);
 		goto skip_allocpage;
 	}
-#endif
 
 	for (i = 0; i < nr_pages; ++i) {
 		if (pages[i] != NULL)
@@ -947,9 +923,7 @@ repeat:
 		pages[i] = __stagingpage_alloc(page_pool, GFP_NOFS);
 	}
 
-#ifndef CONFIG_EROFS_FS_ZIP_MULTIREF
 skip_allocpage:
-#endif
 	vout = erofs_vmap(pages, nr_pages);
 
 	err = z_erofs_vle_unzip_vmap(compressed_pages,
drivers/staging/erofs/unzip_vle.h +1 -11
@@ -47,13 +47,6 @@ static inline bool z_erofs_gather_if_sta
 #define Z_EROFS_VLE_INLINE_PAGEVECS     3
 
 struct z_erofs_vle_work {
-	/* struct z_erofs_vle_work *left, *right; */
-
-#ifdef CONFIG_EROFS_FS_ZIP_MULTIREF
-	struct list_head list;
-
-	atomic_t refcount;
-#endif
 	struct mutex lock;
 
 	/* I: decompression offset in page */
@@ -107,10 +100,8 @@ static inline void z_erofs_vle_set_workg
 	grp->flags = fmt | (grp->flags & ~Z_EROFS_VLE_WORKGRP_FMT_MASK);
 }
 
-#ifdef CONFIG_EROFS_FS_ZIP_MULTIREF
-#error multiref decompression is unimplemented yet
-#else
 
+/* definitions if multiref is disabled */
 #define z_erofs_vle_grab_primary_work(grp)	(&(grp)->work)
 #define z_erofs_vle_grab_work(grp, pageofs)	(&(grp)->work)
 #define z_erofs_vle_work_workgroup(wrk, primary)	\
@@ -118,7 +109,6 @@ static inline void z_erofs_vle_set_workg
 		struct z_erofs_vle_workgroup, work) : \
 		({ BUG(); (void *)NULL; }))
 
-#endif
 
 #define Z_EROFS_WORKGROUP_SIZE       sizeof(struct z_erofs_vle_workgroup)
 
author maintainer
#139 lore raw

PATCH 138/152 staging: erofs: remove the redundant d_rehash() for the root dentry

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit e9c892465583c8f42d61fafe30970d36580925df upstream.

There is actually no need at all to d_rehash() for the root dentry as Al pointed out, fix it.

---
 drivers/staging/erofs/super.c |    6 ------
 1 file changed, 6 deletions(-)
drivers/staging/erofs/super.c +0 -6
@@ -404,12 +404,6 @@ static int erofs_read_super(struct super
 
 	erofs_register_super(sb);
 
-	/*
-	 * We already have a positive dentry, which was instantiated
-	 * by d_make_root. Just need to d_rehash it.
-	 */
-	d_rehash(sb->s_root);
-
 	if (!silent)
 		infoln("mounted on %s with opts: %s.", dev_name,
 			(char *)data);
author maintainer
#140 lore raw

PATCH 139/152 staging: erofs: atomic_cond_read_relaxed on ref-locked workgroup

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit df134b8d17b90c1e7720e318d36416b57424ff7a upstream.

It's better to use atomic_cond_read_relaxed, which is implemented in hardware instructions to monitor a variable changes currently for ARM64, instead of open-coded busy waiting.

---
 drivers/staging/erofs/internal.h |   30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)
drivers/staging/erofs/internal.h +18 -12
@@ -211,23 +211,29 @@ static inline void erofs_workgroup_unfre
 	preempt_enable();
 }
 
+#if defined(CONFIG_SMP)
+static inline int erofs_wait_on_workgroup_freezed(struct erofs_workgroup *grp)
+{
+	return atomic_cond_read_relaxed(&grp->refcount,
+					VAL != EROFS_LOCKED_MAGIC);
+}
+#else
+static inline int erofs_wait_on_workgroup_freezed(struct erofs_workgroup *grp)
+{
+	int v = atomic_read(&grp->refcount);
+
+	/* workgroup is never freezed on uniprocessor systems */
+	DBG_BUGON(v == EROFS_LOCKED_MAGIC);
+	return v;
+}
+#endif
+
 static inline bool erofs_workgroup_get(struct erofs_workgroup *grp, int *ocnt)
 {
-	const int locked = (int)EROFS_LOCKED_MAGIC;
 	int o;
 
 repeat:
-	o = atomic_read(&grp->refcount);
-
-	/* spin if it is temporarily locked at the reclaim path */
-	if (unlikely(o == locked)) {
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-		do
-			cpu_relax();
-		while (atomic_read(&grp->refcount) == locked);
-#endif
-		goto repeat;
-	}
+	o = erofs_wait_on_workgroup_freezed(grp);
 
 	if (unlikely(o <= 0))
 		return -1;
author maintainer
#141 lore raw

PATCH 140/152 staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit 73f5c66df3e26ab750cefcb9a3e08c71c9f79cad upstream.

There are two minor issues in the current freeze interface:

1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK,

      therefore fix the incorrect conditions;

2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later.

---
 drivers/staging/erofs/internal.h |   41 +++++++++++++++++++++++----------------
 1 file changed, 25 insertions(+), 16 deletions(-)
drivers/staging/erofs/internal.h +25 -16
@@ -184,40 +184,49 @@ struct erofs_workgroup {
 
 #define EROFS_LOCKED_MAGIC     (INT_MIN | 0xE0F510CCL)
 
-static inline bool erofs_workgroup_try_to_freeze(
-	struct erofs_workgroup *grp, int v)
+#if defined(CONFIG_SMP)
+static inline bool erofs_workgroup_try_to_freeze(struct erofs_workgroup *grp,
+						 int val)
 {
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-	if (v != atomic_cmpxchg(&grp->refcount,
-		v, EROFS_LOCKED_MAGIC))
-		return false;
 	preempt_disable();
-#else
-	preempt_disable();
-	if (atomic_read(&grp->refcount) != v) {
+	if (val != atomic_cmpxchg(&grp->refcount, val, EROFS_LOCKED_MAGIC)) {
 		preempt_enable();
 		return false;
 	}
-#endif
 	return true;
 }
 
-static inline void erofs_workgroup_unfreeze(
-	struct erofs_workgroup *grp, int v)
+static inline void erofs_workgroup_unfreeze(struct erofs_workgroup *grp,
+					    int orig_val)
 {
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
-	atomic_set(&grp->refcount, v);
-#endif
+	atomic_set(&grp->refcount, orig_val);
 	preempt_enable();
 }
 
-#if defined(CONFIG_SMP)
 static inline int erofs_wait_on_workgroup_freezed(struct erofs_workgroup *grp)
 {
 	return atomic_cond_read_relaxed(&grp->refcount,
 					VAL != EROFS_LOCKED_MAGIC);
 }
 #else
+static inline bool erofs_workgroup_try_to_freeze(struct erofs_workgroup *grp,
+						 int val)
+{
+	preempt_disable();
+	/* no need to spin on UP platforms, let's just disable preemption. */
+	if (val != atomic_read(&grp->refcount)) {
+		preempt_enable();
+		return false;
+	}
+	return true;
+}
+
+static inline void erofs_workgroup_unfreeze(struct erofs_workgroup *grp,
+					    int orig_val)
+{
+	preempt_enable();
+}
+
 static inline int erofs_wait_on_workgroup_freezed(struct erofs_workgroup *grp)
 {
 	int v = atomic_read(&grp->refcount);
author maintainer
#142 lore raw

PATCH 141/152 staging: erofs: add a full barrier in erofs_workgroup_unfreeze

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit 948bbdb1818b7ad6e539dad4fbd2dd4650793ea9 upstream.

Just like other generic locks, insert a full barrier in case of memory reorder.

---
 drivers/staging/erofs/internal.h |    5 +++++
 1 file changed, 5 insertions(+)
drivers/staging/erofs/internal.h +5 -0
@@ -199,6 +199,11 @@ static inline bool erofs_workgroup_try_t
 static inline void erofs_workgroup_unfreeze(struct erofs_workgroup *grp,
 					    int orig_val)
 {
+	/*
+	 * other observers should notice all modifications
+	 * in the freezing period.
+	 */
+	smp_mb();
 	atomic_set(&grp->refcount, orig_val);
 	preempt_enable();
 }
author maintainer
#143 lore raw

PATCH 142/152 staging: erofs: {dir,inode,super}.c: rectify BUG_ONs

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit 8b987bca2d09649683cbe496419a011df8c08493 upstream.

remove all redundant BUG_ONs, and turn the rest
useful usages to DBG_BUGONs.

---
 drivers/staging/erofs/dir.c   |    7 +++++--
 drivers/staging/erofs/inode.c |   10 ++++++++--
 drivers/staging/erofs/super.c |   13 ++++++-------
 3 files changed, 19 insertions(+), 11 deletions(-)
drivers/staging/erofs/dir.c +5 -2
@@ -53,8 +53,11 @@ static int erofs_fill_dentries(struct di
 			strnlen(de_name, maxsize - nameoff) :
 			le16_to_cpu(de[1].nameoff) - nameoff;
 
-		/* the corrupted directory found */
-		BUG_ON(de_namelen < 0);
+		/* a corrupted entry is found */
+		if (unlikely(de_namelen < 0)) {
+			DBG_BUGON(1);
+			return -EIO;
+		}
 
 #ifdef CONFIG_EROFS_FS_DEBUG
 		dbg_namelen = min(EROFS_NAME_LEN - 1, de_namelen);
drivers/staging/erofs/inode.c +8 -2
@@ -132,7 +132,13 @@ static int fill_inline_data(struct inode
 			return -ENOMEM;
 
 		m_pofs += vi->inode_isize + vi->xattr_isize;
-		BUG_ON(m_pofs + inode->i_size > PAGE_SIZE);
+
+		/* inline symlink data shouldn't across page boundary as well */
+		if (unlikely(m_pofs + inode->i_size > PAGE_SIZE)) {
+			DBG_BUGON(1);
+			kfree(lnk);
+			return -EIO;
+		}
 
 		/* get in-page inline data */
 		memcpy(lnk, data + m_pofs, inode->i_size);
@@ -170,7 +176,7 @@ static int fill_inode(struct inode *inod
 		return PTR_ERR(page);
 	}
 
-	BUG_ON(!PageUptodate(page));
+	DBG_BUGON(!PageUptodate(page));
 	data = page_address(page);
 
 	err = read_inode(inode, data + ofs);
drivers/staging/erofs/super.c +6 -7
@@ -40,7 +40,6 @@ static int erofs_init_inode_cache(void)
 
 static void erofs_exit_inode_cache(void)
 {
-	BUG_ON(erofs_inode_cachep == NULL);
 	kmem_cache_destroy(erofs_inode_cachep);
 }
 
@@ -265,8 +264,8 @@ static int managed_cache_releasepage(str
 	int ret = 1;	/* 0 - busy */
 	struct address_space *const mapping = page->mapping;
 
-	BUG_ON(!PageLocked(page));
-	BUG_ON(mapping->a_ops != &managed_cache_aops);
+	DBG_BUGON(!PageLocked(page));
+	DBG_BUGON(mapping->a_ops != &managed_cache_aops);
 
 	if (PagePrivate(page))
 		ret = erofs_try_to_free_cached_page(mapping, page);
@@ -279,10 +278,10 @@ static void managed_cache_invalidatepage
 {
 	const unsigned int stop = length + offset;
 
-	BUG_ON(!PageLocked(page));
+	DBG_BUGON(!PageLocked(page));
 
-	/* Check for overflow */
-	BUG_ON(stop > PAGE_SIZE || stop < length);
+	/* Check for potential overflow in debug mode */
+	DBG_BUGON(stop > PAGE_SIZE || stop < length);
 
 	if (offset == 0 && stop == PAGE_SIZE)
 		while (!managed_cache_releasepage(page, GFP_NOFS))
@@ -619,7 +618,7 @@ static int erofs_show_options(struct seq
 
 static int erofs_remount(struct super_block *sb, int *flags, char *data)
 {
-	BUG_ON(!sb_rdonly(sb));
+	DBG_BUGON(!sb_rdonly(sb));
 
 	*flags |= SB_RDONLY;
 	return 0;
author maintainer
#144 lore raw

PATCH 143/152 staging: erofs: unzip_{pagevec.h,vle.c}: rectify BUG_ONs

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit 70b17991d89554cdd16f3e4fb0179bcc03c808d9 upstream.

remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs.

---
 drivers/staging/erofs/unzip_pagevec.h |    2 -
 drivers/staging/erofs/unzip_vle.c     |   35 +++++++++++++---------------------
 2 files changed, 15 insertions(+), 22 deletions(-)
drivers/staging/erofs/unzip_pagevec.h +1 -1
@@ -150,7 +150,7 @@ z_erofs_pagevec_ctor_dequeue(struct z_er
 	erofs_vtptr_t t;
 
 	if (unlikely(ctor->index >= ctor->nr)) {
-		BUG_ON(ctor->next == NULL);
+		DBG_BUGON(!ctor->next);
 		z_erofs_pagevec_ctor_pagedown(ctor, true);
 	}
 
drivers/staging/erofs/unzip_vle.c +14 -21
@@ -18,9 +18,6 @@ static struct kmem_cache *z_erofs_workgr
 
 void z_erofs_exit_zip_subsystem(void)
 {
-	BUG_ON(z_erofs_workqueue == NULL);
-	BUG_ON(z_erofs_workgroup_cachep == NULL);
-
 	destroy_workqueue(z_erofs_workqueue);
 	kmem_cache_destroy(z_erofs_workgroup_cachep);
 }
@@ -363,7 +360,10 @@ z_erofs_vle_work_register(struct super_b
 	struct z_erofs_vle_work *work;
 
 	/* if multiref is disabled, grp should never be nullptr */
-	BUG_ON(grp != NULL);
+	if (unlikely(grp)) {
+		DBG_BUGON(1);
+		return ERR_PTR(-EINVAL);
+	}
 
 	/* no available workgroup, let's allocate one */
 	grp = kmem_cache_zalloc(z_erofs_workgroup_cachep, GFP_NOFS);
@@ -742,7 +742,7 @@ static inline void z_erofs_vle_read_endi
 		bool cachemngd = false;
 
 		DBG_BUGON(PageUptodate(page));
-		BUG_ON(page->mapping == NULL);
+		DBG_BUGON(!page->mapping);
 
 #ifdef EROFS_FS_HAS_MANAGED_CACHE
 		if (unlikely(mngda == NULL && !z_erofs_is_stagingpage(page))) {
@@ -800,7 +800,7 @@ static int z_erofs_vle_unzip(struct supe
 
 	might_sleep();
 	work = z_erofs_vle_grab_primary_work(grp);
-	BUG_ON(!READ_ONCE(work->nr_pages));
+	DBG_BUGON(!READ_ONCE(work->nr_pages));
 
 	mutex_lock(&work->lock);
 	nr_pages = work->nr_pages;
@@ -849,8 +849,8 @@ repeat:
 		else
 			pagenr = z_erofs_onlinepage_index(page);
 
-		BUG_ON(pagenr >= nr_pages);
-		BUG_ON(pages[pagenr] != NULL);
+		DBG_BUGON(pagenr >= nr_pages);
+		DBG_BUGON(pages[pagenr]);
 
 		pages[pagenr] = page;
 	}
@@ -873,9 +873,8 @@ repeat:
 		if (z_erofs_is_stagingpage(page))
 			continue;
 #ifdef EROFS_FS_HAS_MANAGED_CACHE
-		else if (page->mapping == mngda) {
-			BUG_ON(PageLocked(page));
-			BUG_ON(!PageUptodate(page));
+		if (page->mapping == mngda) {
+			DBG_BUGON(!PageUptodate(page));
 			continue;
 		}
 #endif
@@ -883,8 +882,8 @@ repeat:
 		/* only non-head page could be reused as a compressed page */
 		pagenr = z_erofs_onlinepage_index(page);
 
-		BUG_ON(pagenr >= nr_pages);
-		BUG_ON(pages[pagenr] != NULL);
+		DBG_BUGON(pagenr >= nr_pages);
+		DBG_BUGON(pages[pagenr]);
 		++sparsemem_pages;
 		pages[pagenr] = page;
 
@@ -894,9 +893,6 @@ repeat:
 	llen = (nr_pages << PAGE_SHIFT) - work->pageofs;
 
 	if (z_erofs_vle_workgrp_fmt(grp) == Z_EROFS_VLE_WORKGRP_FMT_PLAIN) {
-		/* FIXME! this should be fixed in the future */
-		BUG_ON(grp->llen != llen);
-
 		err = z_erofs_vle_plain_copy(compressed_pages, clusterpages,
 			pages, nr_pages, work->pageofs);
 		goto out;
@@ -911,10 +907,8 @@ repeat:
 	if (err != -ENOTSUPP)
 		goto out_percpu;
 
-	if (sparsemem_pages >= nr_pages) {
-		BUG_ON(sparsemem_pages > nr_pages);
+	if (sparsemem_pages >= nr_pages)
 		goto skip_allocpage;
-	}
 
 	for (i = 0; i < nr_pages; ++i) {
 		if (pages[i] != NULL)
@@ -1007,7 +1001,7 @@ static void z_erofs_vle_unzip_wq(struct
 		struct z_erofs_vle_unzip_io_sb, io.u.work);
 	LIST_HEAD(page_pool);
 
-	BUG_ON(iosb->io.head == Z_EROFS_VLE_WORKGRP_TAIL_CLOSED);
+	DBG_BUGON(iosb->io.head == Z_EROFS_VLE_WORKGRP_TAIL_CLOSED);
 	z_erofs_vle_unzip_all(iosb->sb, &iosb->io, &page_pool);
 
 	put_pages_list(&page_pool);
@@ -1336,7 +1330,6 @@ static inline int __z_erofs_vle_normalac
 			continue;
 		}
 
-		BUG_ON(PagePrivate(page));
 		set_page_private(page, (unsigned long)head);
 		head = page;
 	}
author maintainer
#145 lore raw

PATCH 144/152 staging: erofs: unzip_vle_lz4.c,utils.c: rectify BUG_ONs

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gao Xiang <[email protected]>

commit b8e076a6ef253e763bfdb81e5c72bcc828b0fbeb upstream.

remove all redundant BUG_ONs, and turn the rest useful usages to DBG_BUGONs.

---
 drivers/staging/erofs/unzip_vle_lz4.c |    2 +-
 drivers/staging/erofs/utils.c         |   12 ++++++------
 2 files changed, 7 insertions(+), 7 deletions(-)
drivers/staging/erofs/unzip_vle_lz4.c +1 -1
@@ -57,7 +57,7 @@ int z_erofs_vle_plain_copy(struct page *
 			if (compressed_pages[j] != page)
 				continue;
 
-			BUG_ON(mirrored[j]);
+			DBG_BUGON(mirrored[j]);
 			memcpy(percpu_data + j * PAGE_SIZE, dst, PAGE_SIZE);
 			mirrored[j] = true;
 			break;
drivers/staging/erofs/utils.c +6 -6
@@ -23,9 +23,6 @@ struct page *erofs_allocpage(struct list
 		list_del(&page->lru);
 	} else {
 		page = alloc_pages(gfp | __GFP_NOFAIL, 0);
-
-		BUG_ON(page == NULL);
-		BUG_ON(page->mapping != NULL);
 	}
 	return page;
 }
@@ -60,7 +57,7 @@ repeat:
 		/* decrease refcount added by erofs_workgroup_put */
 		if (unlikely(oldcount == 1))
 			atomic_long_dec(&erofs_global_shrink_cnt);
-		BUG_ON(index != grp->index);
+		DBG_BUGON(index != grp->index);
 	}
 	rcu_read_unlock();
 	return grp;
@@ -73,8 +70,11 @@ int erofs_register_workgroup(struct supe
 	struct erofs_sb_info *sbi;
 	int err;
 
-	/* grp->refcount should not < 1 */
-	BUG_ON(!atomic_read(&grp->refcount));
+	/* grp shouldn't be broken or used before */
+	if (unlikely(atomic_read(&grp->refcount) != 1)) {
+		DBG_BUGON(1);
+		return -EINVAL;
+	}
 
 	err = radix_tree_preload(GFP_NOFS);
 	if (err)
author maintainer
#146 lore raw

PATCH 145/152 Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hangbin Liu <[email protected]>

commit 278e2148c07559dd4ad8602f22366d61eb2ee7b7 upstream.

This reverts commit 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0") and commit 0fe5119e267f ("net:
bridge: remove ipv6 zero address check in mcast queries")

The reason is RFC 4541 is not a standard but suggestive. Currently we will elect 0.0.0.0 as Querier if there is no ip address configured on bridge. If we do not add the port which recives query with source 0.0.0.0 to router list, the IGMP reports will not be about to forward to Querier, IGMP data will also not be able to forward to dest.

As Nikolay suggested, revert this change first and add a boolopt api to disable none-zero election in future if needed.

Fixes 5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0")
Fixes 0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries")
---
 net/bridge/br_multicast.c |    9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)
net/bridge/br_multicast.c +1 -8
@@ -1420,14 +1420,7 @@ static void br_multicast_query_received(
 		return;
 
 	br_multicast_update_query_timer(br, query, max_delay);
-
-	/* Based on RFC4541, section 2.1.1 IGMP Forwarding Rules,
-	 * the arrival port for IGMP Queries where the source address
-	 * is 0.0.0.0 should not be added to router port list.
-	 */
-	if ((saddr->proto == htons(ETH_P_IP) && saddr->u.ip4) ||
-	    saddr->proto == htons(ETH_P_IPV6))
-		br_multicast_mark_router(br, port);
+	br_multicast_mark_router(br, port);
 }
 
 static void br_ip4_multicast_query(struct net_bridge *br,
author maintainer
#147 lore raw

PATCH 146/152 netfilter: nf_tables: fix flush after rule deletion in the same batch

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

commit 23b7ca4f745f21c2b9cfcb67fdd33733b3ae7e66 upstream.

Flush after rule deletion bogusly hits -ENOENT. Skip rules that have been already from nft_delrule_by_chain() which is always called from the flush path.

Fixes cf9dc09d0949 ("netfilter: nf_tables: fix missing rules flushing per table")
---
 net/netfilter/nf_tables_api.c |    3 +++
 1 file changed, 3 insertions(+)
net/netfilter/nf_tables_api.c +3 -0
@@ -291,6 +291,9 @@ static int nft_delrule_by_chain(struct n
 	int err;
 
 	list_for_each_entry(rule, &ctx->chain->rules, list) {
+		if (!nft_is_active_next(ctx->net, rule))
+			continue;
+
 		err = nft_delrule(ctx, rule);
 		if (err < 0)
 			return err;
author maintainer
#148 lore raw

PATCH 147/152 netfilter: nft_compat: use-after-free when deleting targets

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <[email protected]>

commit 753c111f655e38bbd52fc01321266633f022ebe2 upstream.

Fetch pointer to module before target object is released.

Fixes 29e3880109e3 ("netfilter: nf_tables: fix use-after-free when deleting compat expressions")
Fixes 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
---
 net/netfilter/nft_compat.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/netfilter/nft_compat.c +2 -1
@@ -282,6 +282,7 @@ nft_target_destroy(const struct nft_ctx
 {
 	struct xt_target *target = expr->ops->data;
 	void *info = nft_expr_priv(expr);
+	struct module *me = target->me;
 	struct xt_tgdtor_param par;
 
 	par.net = ctx->net;
@@ -292,7 +293,7 @@ nft_target_destroy(const struct nft_ctx
 		par.target->destroy(&par);
 
 	if (nft_xt_put(container_of(expr->ops, struct nft_xt, ops)))
-		module_put(target->me);
+		module_put(me);
 }
 
 static int nft_target_dump(struct sk_buff *skb, const struct nft_expr *expr)
author maintainer
#149 lore raw

PATCH 148/152 netfilter: ipv6: Dont preserve original oif for loopback address

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eli Cooper <[email protected]>

commit 15df03c661cb362366ecfc3a21820cb934f3e4ca upstream.

Commit 508b09046c0f ("netfilter: ipv6: Preserve link scope traffic original oif") made ip6_route_me_harder() keep the original oif for link-local and multicast packets. However, it also affected packets for the loopback address because it used rt6_need_strict().

REDIRECT rules in the OUTPUT chain rewrite the destination to loopback address; thus its oif should not be preserved. This commit fixes the bug that redirected local packets are being dropped. Actually the packet was not exactly dropped; Instead it was sent out to the original oif rather than lo. When a packet with daddr ::1 is sent to the router, it is effectively dropped.

Fixes 508b09046c0f ("netfilter: ipv6: Preserve link scope traffic original oif")
---
 net/ipv6/netfilter.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/ipv6/netfilter.c +3 -1
@@ -23,9 +23,11 @@ int ip6_route_me_harder(struct net *net,
 	struct sock *sk = sk_to_full_sk(skb->sk);
 	unsigned int hh_len;
 	struct dst_entry *dst;
+	int strict = (ipv6_addr_type(&iph->daddr) &
+		      (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL));
 	struct flowi6 fl6 = {
 		.flowi6_oif = sk && sk->sk_bound_dev_if ? sk->sk_bound_dev_if :
-			rt6_need_strict(&iph->daddr) ? skb_dst(skb)->dev->ifindex : 0,
+			strict ? skb_dst(skb)->dev->ifindex : 0,
 		.flowi6_mark = skb->mark,
 		.flowi6_uid = sock_net_uid(net, sk),
 		.daddr = iph->daddr,
author maintainer
#150 lore raw

PATCH 149/152 netfilter: nfnetlink_osf: add missing fmatch check

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fernando Fernandez Mancera <[email protected]>

commit 1a6a0951fc009f6d9fe8ebea2d2417d80d54097b upstream.

When we check the tcp options of a packet and it doesn't match the current fingerprint, the tcp packet option pointer must be restored to its initial value in order to do the proper tcp options check for the next fingerprint.

Here we can see an example.
Assumming the following fingerprint base with two lines:

S10:64:1:60:M*,S,T,N,W6: Linux:3.0::Linux 3.0
S20:64:1:60:M*,S,T,N,W7: Linux:4.19:arch:Linux 4.1

Where TCP options are the last field in the OS signature, all of them overlap except by the last one, ie. 'W6' versus 'W7'.

In case a packet for Linux 4.19 kicks in, the osf finds no matching because the TCP options pointer is updated after checking for the TCP options in the first line.

Therefore, reset pointer back to where it should be.

Fixes 11eeef41d5f6 ("netfilter: passive OS fingerprint xtables match")
---
 net/netfilter/nfnetlink_osf.c |    4 ++++
 1 file changed, 4 insertions(+)
net/netfilter/nfnetlink_osf.c +4 -0
@@ -71,6 +71,7 @@ static bool nf_osf_match_one(const struc
 			     int ttl_check,
 			     struct nf_osf_hdr_ctx *ctx)
 {
+	const __u8 *optpinit = ctx->optp;
 	unsigned int check_WSS = 0;
 	int fmatch = FMATCH_WRONG;
 	int foptsize, optnum;
@@ -160,6 +161,9 @@ static bool nf_osf_match_one(const struc
 		}
 	}
 
+	if (fmatch != FMATCH_OK)
+		ctx->optp = optpinit;
+
 	return fmatch == FMATCH_OK;
 }
 
author maintainer
#151 lore raw

PATCH 150/152 netfilter: ipt_CLUSTERIP: fix sleep-in-atomic bug in clusterip_config_entry_put()

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Taehee Yoo <[email protected]>

commit 2a61d8b883bbad26b06d2e6cc3777a697e78830d upstream.

A proc_remove() can sleep. so that it can't be inside of spin_lock. Hence proc_remove() is moved to outside of spin_lock. and it also adds mutex to sync create and remove of proc entry(config->pde).

test commands:
SHELL#1

   %while :; do iptables -A INPUT -p udp -i enp2s0 -d 192.168.1.100 \
	   --dport 9000  -j CLUSTERIP --new --hashmode sourceip \
	   --clustermac 01:00:5e:00:00:21 --total-nodes 3 --local-node 3; \
	   iptables -F; done

SHELL#2

   %while :; do echo +1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; \
	   echo -1 > /proc/net/ipt_CLUSTERIP/192.168.1.100; done
[ 2949.569864] BUG: sleeping function called from invalid context at kernel/sched/completion.c:99
[ 2949.579944] in_atomic(): 1, irqs_disabled(): 0, pid: 5472, name: iptables
[ 2949.587920] 1 lock held by iptables/5472:
[ 2949.592711]  #0: 000000008f0ebcf2 (&(&cn->lock)->rlock){+...}, at: refcount_dec_and_lock+0x24/0x50
[ 2949.603307] CPU: 1 PID: 5472 Comm: iptables Tainted: G        W         4.19.0-rc5+ #16
[ 2949.604212] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[ 2949.604212] Call Trace:
[ 2949.604212]  dump_stack+0xc9/0x16b
[ 2949.604212]  ? show_regs_print_info+0x5/0x5
[ 2949.604212]  ___might_sleep+0x2eb/0x420
[ 2949.604212]  ? set_rq_offline.part.87+0x140/0x140
[ 2949.604212]  ? _rcu_barrier_trace+0x400/0x400
[ 2949.604212]  wait_for_completion+0x94/0x710
[ 2949.604212]  ? wait_for_completion_interruptible+0x780/0x780
[ 2949.604212]  ? __kernel_text_address+0xe/0x30
[ 2949.604212]  ? __lockdep_init_map+0x10e/0x5c0
[ 2949.604212]  ? __lockdep_init_map+0x10e/0x5c0
[ 2949.604212]  ? __init_waitqueue_head+0x86/0x130
[ 2949.604212]  ? init_wait_entry+0x1a0/0x1a0
[ 2949.604212]  proc_entry_rundown+0x208/0x270
[ 2949.604212]  ? proc_reg_get_unmapped_area+0x370/0x370
[ 2949.604212]  ? __lock_acquire+0x4500/0x4500
[ 2949.604212]  ? complete+0x18/0x70
[ 2949.604212]  remove_proc_subtree+0x143/0x2a0
[ 2949.708655]  ? remove_proc_entry+0x390/0x390
[ 2949.708655]  clusterip_tg_destroy+0x27a/0x630 [ipt_CLUSTERIP]

[ ... ]

Fixes b3e456fce9f5 ("netfilter: ipt_CLUSTERIP: fix a race condition of proc file creation")
---
 net/ipv4/netfilter/ipt_CLUSTERIP.c |   19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)
net/ipv4/netfilter/ipt_CLUSTERIP.c +14 -5
@@ -56,7 +56,7 @@ struct clusterip_config {
 #endif
 	enum clusterip_hashmode hash_mode;	/* which hashing mode */
 	u_int32_t hash_initval;			/* hash initialization */
-	struct rcu_head rcu;
+	struct rcu_head rcu;			/* for call_rcu_bh */
 	struct net *net;			/* netns for pernet list */
 	char ifname[IFNAMSIZ];			/* device ifname */
 };
@@ -72,6 +72,8 @@ struct clusterip_net {
 
 #ifdef CONFIG_PROC_FS
 	struct proc_dir_entry *procdir;
+	/* mutex protects the config->pde*/
+	struct mutex mutex;
 #endif
 };
 
@@ -118,17 +120,18 @@ clusterip_config_entry_put(struct cluste
 
 	local_bh_disable();
 	if (refcount_dec_and_lock(&c->entries, &cn->lock)) {
+		list_del_rcu(&c->list);
+		spin_unlock(&cn->lock);
+		local_bh_enable();
 		/* In case anyone still accesses the file, the open/close
 		 * functions are also incrementing the refcount on their own,
 		 * so it's safe to remove the entry even if it's in use. */
 #ifdef CONFIG_PROC_FS
+		mutex_lock(&cn->mutex);
 		if (cn->procdir)
 			proc_remove(c->pde);
+		mutex_unlock(&cn->mutex);
 #endif
-		list_del_rcu(&c->list);
-		spin_unlock(&cn->lock);
-		local_bh_enable();
-
 		return;
 	}
 	local_bh_enable();
@@ -278,9 +281,11 @@ clusterip_config_init(struct net *net, c
 
 		/* create proc dir entry */
 		sprintf(buffer, "%pI4", &ip);
+		mutex_lock(&cn->mutex);
 		c->pde = proc_create_data(buffer, 0600,
 					  cn->procdir,
 					  &clusterip_proc_fops, c);
+		mutex_unlock(&cn->mutex);
 		if (!c->pde) {
 			err = -ENOMEM;
 			goto err;
@@ -833,6 +838,7 @@ static int clusterip_net_init(struct net
 		pr_err("Unable to proc dir entry\n");
 		return -ENOMEM;
 	}
+	mutex_init(&cn->mutex);
 #endif /* CONFIG_PROC_FS */
 
 	return 0;
@@ -841,9 +847,12 @@ static int clusterip_net_init(struct net
 static void clusterip_net_exit(struct net *net)
 {
 	struct clusterip_net *cn = clusterip_pernet(net);
+
 #ifdef CONFIG_PROC_FS
+	mutex_lock(&cn->mutex);
 	proc_remove(cn->procdir);
 	cn->procdir = NULL;
+	mutex_unlock(&cn->mutex);
 #endif
 	nf_unregister_net_hook(net, &cip_arp_ops);
 }
author maintainer
#152 lore raw

PATCH 151/152 udlfb: handle unplug properly

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

commit 68a958a915ca912b8ce71b9eea7445996f6e681e upstream.

The udlfb driver maintained an open count and cleaned up itself when the count reached zero. But the console is also counted in the reference count
- so, if the user unplugged the device, the open count would not drop to zero and the driver stayed loaded with console attached. If the user re-plugged the adapter, it would create a device /dev/fb1, show green screen and the access to the console would be lost.

The framebuffer subsystem has reference counting on its own - in order to fix the unplug bug, we rely the framebuffer reference counting. When the user unplugs the adapter, we call unregister_framebuffer unconditionally. unregister_framebuffer will unbind the console, wait until all users stop using the framebuffer and then call the fb_destroy method. The fb_destroy cleans up the USB driver.

This patch makes the following changes:
* Drop dlfb->kref and rely on implicit framebuffer reference counting instead.
* dlfb_usb_disconnect calls unregister_framebuffer, the rest of driver cleanup is done in the function dlfb_ops_destroy. dlfb_ops_destroy will be called by the framebuffer subsystem when no processes have the framebuffer open or mapped.
* We don't use workqueue during initialization, but initialize directly from dlfb_usb_probe. The workqueue could race with dlfb_usb_disconnect and this racing would produce various kinds of memory corruption.
* We use usb_get_dev and usb_put_dev to make sure that the USB subsystem doesn't free the device under us.

---
 drivers/video/fbdev/udlfb.c |  141 +++++++++++---------------------------------
 include/video/udlfb.h       |    3 
 2 files changed, 37 insertions(+), 107 deletions(-)
drivers/video/fbdev/udlfb.c +37 -104
@@ -916,8 +916,6 @@ static int dlfb_ops_open(struct fb_info
 
 	dlfb->fb_count++;
 
-	kref_get(&dlfb->kref);
-
 	if (fb_defio && (info->fbdefio == NULL)) {
 		/* enable defio at last moment if not disabled by client */
 
@@ -940,14 +938,17 @@ static int dlfb_ops_open(struct fb_info
 	return 0;
 }
 
-/*
- * Called when all client interfaces to start transactions have been disabled,
- * and all references to our device instance (dlfb_data) are released.
- * Every transaction must have a reference, so we know are fully spun down
- */
-static void dlfb_free(struct kref *kref)
+static void dlfb_ops_destroy(struct fb_info *info)
 {
-	struct dlfb_data *dlfb = container_of(kref, struct dlfb_data, kref);
+	struct dlfb_data *dlfb = info->par;
+
+	if (info->cmap.len != 0)
+		fb_dealloc_cmap(&info->cmap);
+	if (info->monspecs.modedb)
+		fb_destroy_modedb(info->monspecs.modedb);
+	vfree(info->screen_base);
+
+	fb_destroy_modelist(&info->modelist);
 
 	while (!list_empty(&dlfb->deferred_free)) {
 		struct dlfb_deferred_free *d = list_entry(dlfb->deferred_free.next, struct dlfb_deferred_free, list);
@@ -957,40 +958,13 @@ static void dlfb_free(struct kref *kref)
 	}
 	vfree(dlfb->backing_buffer);
 	kfree(dlfb->edid);
+	usb_put_dev(dlfb->udev);
 	kfree(dlfb);
-}
-
-static void dlfb_free_framebuffer(struct dlfb_data *dlfb)
-{
-	struct fb_info *info = dlfb->info;
-
-	if (info) {
-		unregister_framebuffer(info);
-
-		if (info->cmap.len != 0)
-			fb_dealloc_cmap(&info->cmap);
-		if (info->monspecs.modedb)
-			fb_destroy_modedb(info->monspecs.modedb);
-		vfree(info->screen_base);
-
-		fb_destroy_modelist(&info->modelist);
-
-		dlfb->info = NULL;
-
-		/* Assume info structure is freed after this point */
-		framebuffer_release(info);
-	}
 
-	/* ref taken in probe() as part of registering framebfufer */
-	kref_put(&dlfb->kref, dlfb_free);
+	/* Assume info structure is freed after this point */
+	framebuffer_release(info);
 }
 
-static void dlfb_free_framebuffer_work(struct work_struct *work)
-{
-	struct dlfb_data *dlfb = container_of(work, struct dlfb_data,
-					     free_framebuffer_work.work);
-	dlfb_free_framebuffer(dlfb);
-}
 /*
  * Assumes caller is holding info->lock mutex (for open and release at least)
  */
@@ -1000,10 +974,6 @@ static int dlfb_ops_release(struct fb_in
 
 	dlfb->fb_count--;
 
-	/* We can't free fb_info here - fbmem will touch it when we return */
-	if (dlfb->virtualized && (dlfb->fb_count == 0))
-		schedule_delayed_work(&dlfb->free_framebuffer_work, HZ);
-
 	if ((dlfb->fb_count == 0) && (info->fbdefio)) {
 		fb_deferred_io_cleanup(info);
 		kfree(info->fbdefio);
@@ -1013,8 +983,6 @@ static int dlfb_ops_release(struct fb_in
 
 	dev_dbg(info->dev, "release, user=%d count=%d\n", user, dlfb->fb_count);
 
-	kref_put(&dlfb->kref, dlfb_free);
-
 	return 0;
 }
 
@@ -1172,6 +1140,7 @@ static struct fb_ops dlfb_ops = {
 	.fb_blank = dlfb_ops_blank,
 	.fb_check_var = dlfb_ops_check_var,
 	.fb_set_par = dlfb_ops_set_par,
+	.fb_destroy = dlfb_ops_destroy,
 };
 
 
@@ -1615,12 +1584,13 @@ success:
 	return true;
 }
 
-static void dlfb_init_framebuffer_work(struct work_struct *work);
-
 static int dlfb_usb_probe(struct usb_interface *intf,
 			  const struct usb_device_id *id)
 {
+	int i;
+	const struct device_attribute *attr;
 	struct dlfb_data *dlfb;
+	struct fb_info *info;
 	int retval = -ENOMEM;
 	struct usb_device *usbdev = interface_to_usbdev(intf);
 
@@ -1631,10 +1601,9 @@ static int dlfb_usb_probe(struct usb_int
 		goto error;
 	}
 
-	kref_init(&dlfb->kref); /* matching kref_put in usb .disconnect fn */
 	INIT_LIST_HEAD(&dlfb->deferred_free);
 
-	dlfb->udev = usbdev;
+	dlfb->udev = usb_get_dev(usbdev);
 	usb_set_intfdata(intf, dlfb);
 
 	dev_dbg(&intf->dev, "console enable=%d\n", console);
@@ -1657,42 +1626,6 @@ static int dlfb_usb_probe(struct usb_int
 	}
 
 
-	if (!dlfb_alloc_urb_list(dlfb, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
-		retval = -ENOMEM;
-		dev_err(&intf->dev, "unable to allocate urb list\n");
-		goto error;
-	}
-
-	kref_get(&dlfb->kref); /* matching kref_put in free_framebuffer_work */
-
-	/* We don't register a new USB class. Our client interface is dlfbev */
-
-	/* Workitem keep things fast & simple during USB enumeration */
-	INIT_DELAYED_WORK(&dlfb->init_framebuffer_work,
-			  dlfb_init_framebuffer_work);
-	schedule_delayed_work(&dlfb->init_framebuffer_work, 0);
-
-	return 0;
-
-error:
-	if (dlfb) {
-
-		kref_put(&dlfb->kref, dlfb_free); /* last ref from kref_init */
-
-		/* dev has been deallocated. Do not dereference */
-	}
-
-	return retval;
-}
-
-static void dlfb_init_framebuffer_work(struct work_struct *work)
-{
-	int i, retval;
-	struct fb_info *info;
-	const struct device_attribute *attr;
-	struct dlfb_data *dlfb = container_of(work, struct dlfb_data,
-					     init_framebuffer_work.work);
-
 	/* allocates framebuffer driver structure, not framebuffer memory */
 	info = framebuffer_alloc(0, &dlfb->udev->dev);
 	if (!info) {
@@ -1706,17 +1639,22 @@ static void dlfb_init_framebuffer_work(s
 	dlfb->ops = dlfb_ops;
 	info->fbops = &dlfb->ops;
 
+	INIT_LIST_HEAD(&info->modelist);
+
+	if (!dlfb_alloc_urb_list(dlfb, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
+		retval = -ENOMEM;
+		dev_err(&intf->dev, "unable to allocate urb list\n");
+		goto error;
+	}
+
+	/* We don't register a new USB class. Our client interface is dlfbev */
+
 	retval = fb_alloc_cmap(&info->cmap, 256, 0);
 	if (retval < 0) {
 		dev_err(info->device, "cmap allocation failed: %d\n", retval);
 		goto error;
 	}
 
-	INIT_DELAYED_WORK(&dlfb->free_framebuffer_work,
-			  dlfb_free_framebuffer_work);
-
-	INIT_LIST_HEAD(&info->modelist);
-
 	retval = dlfb_setup_modes(dlfb, info, NULL, 0);
 	if (retval != 0) {
 		dev_err(info->device,
@@ -1760,10 +1698,16 @@ static void dlfb_init_framebuffer_work(s
 		 dev_name(info->dev), info->var.xres, info->var.yres,
 		 ((dlfb->backing_buffer) ?
 		 info->fix.smem_len * 2 : info->fix.smem_len) >> 10);
-	return;
+	return 0;
 
 error:
-	dlfb_free_framebuffer(dlfb);
+	if (dlfb->info) {
+		dlfb_ops_destroy(dlfb->info);
+	} else if (dlfb) {
+		usb_put_dev(dlfb->udev);
+		kfree(dlfb);
+	}
+	return retval;
 }
 
 static void dlfb_usb_disconnect(struct usb_interface *intf)
@@ -1791,20 +1735,9 @@ static void dlfb_usb_disconnect(struct u
 		for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
 			device_remove_file(info->dev, &fb_device_attrs[i]);
 		device_remove_bin_file(info->dev, &edid_attr);
-		unlink_framebuffer(info);
 	}
 
-	usb_set_intfdata(intf, NULL);
-	dlfb->udev = NULL;
-
-	/* if clients still have us open, will be freed on last close */
-	if (dlfb->fb_count == 0)
-		schedule_delayed_work(&dlfb->free_framebuffer_work, 0);
-
-	/* release reference taken by kref_init in probe() */
-	kref_put(&dlfb->kref, dlfb_free);
-
-	/* consider dlfb_data freed */
+	unregister_framebuffer(info);
 }
 
 static struct usb_driver dlfb_driver = {
include/video/udlfb.h +0 -3
@@ -36,12 +36,9 @@ struct dlfb_data {
 	struct usb_device *udev;
 	struct fb_info *info;
 	struct urb_list urbs;
-	struct kref kref;
 	char *backing_buffer;
 	int fb_count;
 	bool virtualized; /* true when physical usb device not present */
-	struct delayed_work init_framebuffer_work;
-	struct delayed_work free_framebuffer_work;
 	atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
 	atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
 	char *edid; /* null until we read edid from hw or get from sysfs */
author maintainer
#153 lore raw

PATCH 152/152 pinctrl: max77620: Use define directive for max77620_pinconf_param values

In reply to Greg Kroah-Hartman

4.19-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nathan Chancellor <[email protected]>

commit 1f60652dd586d1b3eee7c4602892a97a62fa937a upstream.

Clang warns when one enumerated type is implicitly converted to another:

drivers/pinctrl/pinctrl-max77620.c:56:12: warning: implicit conversion from enumeration type 'enum max77620_pinconf_param' to different enumeration type 'enum pin_config_param' [-Wenum-conversion]

                .param = MAX77620_ACTIVE_FPS_SOURCE,
                         ^~~~~~~~~~~~~~~~~~~~~~~~~~

It is expected that pinctrl drivers can extend pin_config_param because of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion isn't an issue. Most drivers that take advantage of this define the PIN_CONFIG variables as constants, rather than enumerated values. Do the same thing here so that Clang no longer warns.

---
 drivers/pinctrl/pinctrl-max77620.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
drivers/pinctrl/pinctrl-max77620.c +6 -8
@@ -34,14 +34,12 @@ enum max77620_pin_ppdrv {
 	MAX77620_PIN_PP_DRV,
 };
 
-enum max77620_pinconf_param {
-	MAX77620_ACTIVE_FPS_SOURCE = PIN_CONFIG_END + 1,
-	MAX77620_ACTIVE_FPS_POWER_ON_SLOTS,
-	MAX77620_ACTIVE_FPS_POWER_DOWN_SLOTS,
-	MAX77620_SUSPEND_FPS_SOURCE,
-	MAX77620_SUSPEND_FPS_POWER_ON_SLOTS,
-	MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS,
-};
+#define MAX77620_ACTIVE_FPS_SOURCE		(PIN_CONFIG_END + 1)
+#define MAX77620_ACTIVE_FPS_POWER_ON_SLOTS	(PIN_CONFIG_END + 2)
+#define MAX77620_ACTIVE_FPS_POWER_DOWN_SLOTS	(PIN_CONFIG_END + 3)
+#define MAX77620_SUSPEND_FPS_SOURCE		(PIN_CONFIG_END + 4)
+#define MAX77620_SUSPEND_FPS_POWER_ON_SLOTS	(PIN_CONFIG_END + 5)
+#define MAX77620_SUSPEND_FPS_POWER_DOWN_SLOTS	(PIN_CONFIG_END + 6)
 
 struct max77620_pin_function {
 	const char *name;
maintainer
#154 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.26 release. There are 152 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Feb 27 19:49:57 UTC 2019. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.26-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.19:

    11 builds:	11 pass, 0 fail
    22 boots:	22 pass, 0 fail
    22 tests:	22 pass, 0 fail

Linux version: 4.19.26-rc1-g19150dd
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line
nvpublic
#155 lore raw
In reply to Greg Kroah-Hartman
Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.26 release. There are 152 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Feb 27 19:49:57 UTC 2019. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 8 lines
        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.26-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.19.26-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 19150dd19094c29a4df049941da4f077776b8e81
git describe: v4.19.25-153-g19150dd19094
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.25-153-g19150dd19094

No regressions (compared to build v4.19.25)

No fixes (compared to build v4.19.25)

Ran 13671 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm

Test Suites
-----------
* boot
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* spectre-meltdown-checker-test
* ltp-dio-tests
* ltp-open-posix-tests

Signature · 2 lines
Linaro LKFT
https://lkft.linaro.org
#156 lore raw
In reply to Greg Kroah-Hartman
Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.26 release. There are 152 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Feb 27 19:49:57 UTC 2019. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

Quoted 9 lines
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.26-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

#157 lore raw
In reply to Greg Kroah-Hartman
Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.19.26 release. There are 152 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Wed Feb 27 19:49:57 UTC 2019. Anything received after that time might be too late.

Build results:

	total: 156 pass: 155 fail: 1
Failed builds: 
	powerpc:ppc6xx_defconfig
Qemu test results:
	total: 343 pass: 343 fail: 0

Guenter