4.20.13-stable review
Subsystems (8)
Greg Kroah-Hartman
maintainercover 4.20.13-stable review
This is the start of the stable review cycle for the 4.20.13 release. There are 183 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed Feb 27 19:49:59 UTC 2019. Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.20.13-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.20.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.20.13-rc1
Nathan Chancellor <[email protected]>
pinctrl: max77620: Use define directive for max77620_pinconf_param values
Taehee Yoo <[email protected]>
netfilter: ipt_CLUSTERIP: fix sleep-in-atomic bug in clusterip_config_entry_put()
Fernando Fernandez Mancera <[email protected]>
netfilter: nfnetlink_osf: add missing fmatch check
Eli Cooper <[email protected]>
netfilter: ipv6: Don't preserve original oif for loopback address
Pablo Neira Ayuso <[email protected]>
netfilter: nft_compat: use-after-free when deleting targets
Pablo Neira Ayuso <[email protected]>
netfilter: nf_tables: fix flush after rule deletion in the same batch
Hangbin Liu <[email protected]>
Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"
Gao Xiang <[email protected]>
staging: erofs: unzip_vle_lz4.c,utils.c: rectify BUG_ONs
Gao Xiang <[email protected]>
staging: erofs: unzip_{pagevec.h,vle.c}: rectify BUG_ONs
Gao Xiang <[email protected]>
staging: erofs: {dir,inode,super}.c: rectify BUG_ONs
Gao Xiang <[email protected]>
staging: erofs: add a full barrier in erofs_workgroup_unfreeze
Gao Xiang <[email protected]>
staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'
Gao Xiang <[email protected]>
staging: erofs: atomic_cond_read_relaxed on ref-locked workgroup
Gao Xiang <[email protected]>
staging: erofs: remove the redundant d_rehash() for the root dentry
Willem de Bruijn <[email protected]>
net: avoid false positives in untrusted gso validation
Willem de Bruijn <[email protected]>
net: validate untrusted gso packets without csum offload
Curtis Malainey <[email protected]>
ASoC: soc-core: fix init platform memory handling
Pierre Morel <[email protected]>
s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
Yu Zhang <[email protected]>
kvm: x86: Return LA57 feature based on hardware capability
Vitaly Kuznetsov <[email protected]>
x86/kvm/mmu: fix switch between root and guest MMUs
Yu Zhang <[email protected]>
KVM: MMU: record maximum physical address width in kvm_mmu_extended_role
Felix Fietkau <[email protected]>
mac80211: allocate tailroom for forwarded mesh packets
Toke Høiland-Jørgensen <[email protected]>
mac80211: Change default tx_sk_pacing_shift to 7
Leo (Hanghong) Ma <[email protected]>
drm/amd/display: Fix MST reboot/poweroff sequence
Christian König <[email protected]>
drm/amdgpu: disable bulk moves for now
Chris Wilson <[email protected]>
drm/i915/fbdev: Actually configure untiled displays
Rafael J. Wysocki <[email protected]>
gpu: drm: radeon: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime
Alex Deucher <[email protected]>
drm/amdgpu: Set DPM_FLAG_NEVER_SKIP when enabling PM-runtime
Yangtao Li <[email protected]>
cpufreq: scmi: Fix use-after-free in scmi_cpufreq_exit()
Alexey Brodkin <[email protected]>
ARC: define ARCH_SLAB_MINALIGN = 8
Eugeniy Paltsev <[email protected]>
ARC: U-boot: check arguments paranoidly
Eugeniy Paltsev <[email protected]>
ARCv2: Enable unaligned access in early ASM code
Dmitry V. Levin <[email protected]>
parisc: Fix ptrace syscall number modification
Alexandre Belloni <[email protected]>
clk: at91: fix at91sam9x5 peripheral clock number
Alexandre Belloni <[email protected]>
clk: at91: fix masterck name
Eric Biggers <[email protected]>
KEYS: always initialize keyring_index_key::desc_len
Eric Biggers <[email protected]>
KEYS: user: Align the payload buffer
Bart Van Assche <[email protected]>
RDMA/srp: Rework SCSI device reset handling
Masato Suzuki <[email protected]>
scsi: sd_zbc: Fix sd_zbc_report_zones() buffer allocation
Saeed Mahameed <[email protected]>
net/mlx5e: XDP, fix redirect resources availability check
Raed Salem <[email protected]>
net/mlx5e: FPGA, fix Innova IPsec TX offload data path performance
Cong Wang <[email protected]>
net_sched: fix two more memory leaks in cls_tcindex
Cong Wang <[email protected]>
net_sched: fix a memory leak in cls_tcindex
Cong Wang <[email protected]>
net_sched: fix a race condition in tcindex_destroy()
Hangbin Liu <[email protected]>
sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
Hangbin Liu <[email protected]>
geneve: should not call rt6_lookup() when ipv6 was disabled
Johannes Berg <[email protected]>
net: socket: make bond ioctls go through compat_ifreq_ioctl()
Johannes Berg <[email protected]>
net: socket: fix SIOCGIFNAME in compat
Johannes Berg <[email protected]>
Revert "kill dev_ifsioc()"
Johannes Berg <[email protected]>
Revert "socket: fix struct ifreq size in compat ioctl"
Florian Fainelli <[email protected]>
net: dsa: Fix NPD checking for br_vlan_enabled()
Cong Wang <[email protected]>
team: avoid complex list operations in team_nl_cmd_options_set()
Xin Long <[email protected]>
sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate
Xin Long <[email protected]>
sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment
Russell King <[email protected]>
net: sfp: do not probe SFP module before we're attached
Kal Conley <[email protected]>
net/packet: fix 4gb buffer limit due to overflow check
Tonghao Zhang <[email protected]>
net/mlx5e: Don't overwrite pedit action when multiple pedit used
Saeed Mahameed <[email protected]>
net/mlx4_en: Force CHECKSUM_NONE for short ethernet frames
Arthur Kiyanovski <[email protected]>
net: ena: fix race between link up and device initalization
Li RongQing <[email protected]>
ipv6: propagate genlmsg_reply return code
Konstantin Khlebnikov <[email protected]>
inet_diag: fix reporting cgroup classid and fallback to priority
Eric Dumazet <[email protected]>
batman-adv: fix uninit-value in batadv_interface_tx()
Nathan Chancellor <[email protected]>
isdn: avm: Fix string plus integer warning from Clang
Tariq Toukan <[email protected]>
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
Daniel Borkmann <[email protected]>
bpf: pull in pkt_sched.h header for tooling to fix bpftool build
Ido Schimmel <[email protected]>
selftests: forwarding: Add a test case for externally learned FDB entries
Ido Schimmel <[email protected]>
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
Ido Schimmel <[email protected]>
net: bridge: Mark FDB entries that were added by user as such
Nir Dotan <[email protected]>
mlxsw: pci: Return error on PCI reset timeout
Madalin Bucur <[email protected]>
dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start
Yuchung Cheng <[email protected]>
bpf: fix SO_MAX_PACING_RATE to support TCP internal pacing
Peter Oskolkov <[email protected]>
bpf: bpf_setsockopt: reset sock dst on SO_MARK changes
Kangjie Lu <[email protected]>
leds: lp5523: fix a missing check of return value of lp55xx_read
Cheng-Min Ao <[email protected]>
hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table
Colin Ian King <[email protected]>
atm: he: fix sign-extension overflow on large shift
Stanislav Fomichev <[email protected]>
selftests/bpf: retry tests that expect build-id
Stanislav Fomichev <[email protected]>
bpf: zero out build_id for BPF_STACK_BUILD_ID_IP
Stanislav Fomichev <[email protected]>
bpf: don't assume build-id length is always 20 bytes
David Howells <[email protected]>
afs: Fix race in async call refcounting
David Howells <[email protected]>
afs: Provide a function to get a ref on a call
David Howells <[email protected]>
afs: Fix key refcounting in file locking code
Marc Dionne <[email protected]>
afs: Don't set vnode->cb_s_break in afs_validate()
Davide Caratti <[email protected]>
selftests: tc-testing: fix parsing of ife type
Davide Caratti <[email protected]>
selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified
Davide Caratti <[email protected]>
selftests: tc-testing: drop test on missing tunnel key id
Heiner Kallweit <[email protected]>
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031
Rafael J. Wysocki <[email protected]>
ACPI: EC: Look for ECDT EC after calling acpi_load_tables()
Wen Yang <[email protected]>
pvcalls-front: fix potential null dereference
Julia Lawall <[email protected]>
drm/sun4i: backend: add missing of_node_puts
Trond Myklebust <[email protected]>
SUNRPC: Ensure we respect the RPCSEC_GSS sequence number limit
Trond Myklebust <[email protected]>
SUNRPC: Ensure rq_bytes_sent is reset before request transmission
Yonghong Song <[email protected]>
samples/bpf: workaround clang asm goto compilation errors
Stanislav Fomichev <[email protected]>
selftests/bpf: install with_tunnels.sh for test_flow_dissector.sh
Krzysztof Kazimierczak <[email protected]>
xsk: Check if a queue exists during umem setup
Bijan Mottahedeh <[email protected]>
vhost/scsi: Use copy_to_iter() to send control queue response
Pavel Tikhomirov <[email protected]>
vhost: return EINVAL if iovecs size does not match the message size
Charlene Liu <[email protected]>
drm/amd/display: fix PME notification not working in RV desktop
Felix Kuehling <[email protected]>
drm/amdkfd: Don't assign dGPUs to APU topology devices
Julia Lawall <[email protected]>
drm/meson: add missing of_node_put
Talons Lee <[email protected]>
always clear the X2APIC_ENABLE bit for PV guest
Henry Yen <[email protected]>
netfilter: nft_flow_offload: fix checking method of conntrack helper
Varun Prakash <[email protected]>
scsi: cxgb4i: add wait_for_completion()
Thomas Bogendoerfer <[email protected]>
scsi: qla1280: set 64bit coherent mask
Avri Altman <[email protected]>
scsi: ufs: Fix geometry descriptor size
Manish Rangankar <[email protected]>
scsi: qedi: Add ep_state for login completion on un-reachable targets
Stanley Chu <[email protected]>
scsi: ufs: Fix system suspend status
Xiubo Li <[email protected]>
scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes
Jia-Ju Bai <[email protected]>
isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
Jose Abreu <[email protected]>
net: stmmac: Prevent RX starvation in stmmac_napi_poll()
Jose Abreu <[email protected]>
net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
Jose Abreu <[email protected]>
net: stmmac: Check if CBS is supported before configuring
Jose Abreu <[email protected]>
net: stmmac: dwxgmac2: Only clear interrupts that are active
Jose Abreu <[email protected]>
net: stmmac: Fix PCI module removal leak
Tony Luck <[email protected]>
acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()
Christophe Leroy <[email protected]>
powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
Leon Romanovsky <[email protected]>
RDMA/mthca: Clear QP objects during their allocation
wenxu <[email protected]>
netfilter: nft_flow_offload: fix interaction with vrf slave device
Marc Dionne <[email protected]>
afs: Set correct lock type for the yfs CreateFile
Song Liu <[email protected]>
bpf: fix panic in stack_map_get_build_id() on i386 and arm32
Anders Roxell <[email protected]>
selftests: bpf: install files tcp_(server|client)*.py
Wen Yang <[email protected]>
pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock
Yuchung Cheng <[email protected]>
bpf: correctly set initial window on active Fast Open sender
wenxu <[email protected]>
netfilter: nft_flow_offload: Fix reverse route lookup
Thomas Bogendoerfer <[email protected]>
MIPS: jazz: fix 64bit build
Michael S. Tsirkin <[email protected]>
include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR
Logan Gunthorpe <[email protected]>
scsi: isci: initialize shost fully before calling scsi_add_host()
YueHaibing <[email protected]>
scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
Taehee Yoo <[email protected]>
netfilter: nf_tables: fix leaking object reference count
Ido Schimmel <[email protected]>
selftests: forwarding: Add a test for VLAN deletion
Ido Schimmel <[email protected]>
mlxsw: spectrum: Add VXLAN dependency for spectrum
Nir Dotan <[email protected]>
mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition
Dan Carpenter <[email protected]>
xprtrdma: Double free in rpcrdma_sendctxs_create()
Alban Bedel <[email protected]>
MIPS: ath79: Enable OF serial ports in the default config
Stephen Warren <[email protected]>
net/mlx4: Get rid of page operation after dma_alloc_coherent
NeilBrown <[email protected]>
watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
Guenter Roeck <[email protected]>
hwmon: (nct6775) Enable IO mapping for NCT6797D and NCT6798D
Guenter Roeck <[email protected]>
hwmon: (nct6775) Fix chip ID for NCT6798D
Andrey Ignatov <[email protected]>
selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr
Andrey Ignatov <[email protected]>
bpf: Fix [::] -> [::1] rewrite in sys_sendmsg
Peter Oskolkov <[email protected]>
selftests: net: fix/improve ip_defrag selftest
Yonglong Liu <[email protected]>
net: hns: Fix use after free identified by SLUB debug
Denis Bolotin <[email protected]>
qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier
Denis Bolotin <[email protected]>
qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count
Wen Yang <[email protected]>
soc/fsl/qe: fix err handling of ucc_of_parse_tdm
YueHaibing <[email protected]>
xen/pvcalls: remove set but not used variable 'intf'
Kangjie Lu <[email protected]>
mfd: mc13xxx: Fix a missing check of a register-read failure
Keerthy <[email protected]>
mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
Enric Balletbo i Serra <[email protected]>
mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
Oskari Lemmela <[email protected]>
mfd: axp20x: Add supported cells for AXP803
Chen-Yu Tsai <[email protected]>
mfd: axp20x: Re-align MFD cell entries
Oskari Lemmela <[email protected]>
mfd: axp20x: Add AC power supply cell for AXP813
Charles Keepax <[email protected]>
mfd: wm5110: Add missing ASRC rate register
Jonathan Marek <[email protected]>
mfd: qcom_rpm: write fw_version to CTRL_REG
Jean Delvare <[email protected]>
mfd: at91-usart: Add platform dependency
Dien Pham <[email protected]>
mfd: bd9571mwv: Add volatile register to make DVFS work
Dan Carpenter <[email protected]>
mfd: ab8500-core: Return zero in get_register_interruptible()
Nicolas Boichat <[email protected]>
mfd: mt6397: Do not call irq_domain_remove if PMIC unsupported
Nathan Chancellor <[email protected]>
mfd: db8500-prcmu: Fix some section annotations
Nathan Chancellor <[email protected]>
mfd: twl-core: Fix section annotations on {,un}protect_pm_master
Stefano Stabellini <[email protected]>
pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read
Stefano Stabellini <[email protected]>
pvcalls-front: properly allocate sk
Stefano Stabellini <[email protected]>
pvcalls-front: don't try to free unallocated rings
Stefano Stabellini <[email protected]>
pvcalls-front: read all data before closing the connection
Vignesh R <[email protected]>
mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
Heiko Stuebner <[email protected]>
backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables
Eric Biggers <[email protected]>
KEYS: allow reaching the keys quotas exactly
Hui Wang <[email protected]>
ALSA: hda/realtek: Disable PC beep in passthrough on alc285
Jeremy Soller <[email protected]>
ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5
Michal Hocko <[email protected]>
proc, oom: do not report alien mms when setting oom_score_adj
Ralph Campbell <[email protected]>
numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES
Yan, Zheng <[email protected]>
ceph: avoid repeatedly adding inode to mdsc->snap_flush_list
Ilya Dryomov <[email protected]>
libceph: handle an empty authorize reply
Bjorn Andersson <[email protected]>
pinctrl: qcom: qcs404: Correct SDC tile
Herbert Xu <[email protected]>
mac80211: Free mpath object when rhashtable insertion fails
Herbert Xu <[email protected]>
mac80211: Use linked list instead of rhashtable walk for mesh tables
Rakesh Pillai <[email protected]>
mac80211: Restore vif beacon interval if start ap fails
Lubomir Rintel <[email protected]>
gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2
René van Dorst <[email protected]>
gpio: MT7621: use a per instance irq_chip structure
Stanislaw Gruszka <[email protected]>
mt76x0u: fix suspend/resume
Paul Burton <[email protected]>
MIPS: eBPF: Always return sign extended 32b values
Quentin Perret <[email protected]>
tracing: Fix number of entries in trace header
Changbin Du <[email protected]>
kprobe: Do not use uaccess functions to access kernel memory that can fault
Mathieu Desnoyers <[email protected]>
ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction
-------------
Diffstat:
Makefile | 4 +- arch/arc/include/asm/cache.h | 11 + arch/arc/kernel/head.S | 14 +- arch/arc/kernel/setup.c | 87 +- arch/arm/probes/kprobes/opt-arm.c | 2 +- arch/mips/configs/ath79_defconfig | 1 + arch/mips/jazz/jazzdma.c | 5 +- arch/mips/net/ebpf_jit.c | 9 +- arch/parisc/kernel/ptrace.c | 29 +- arch/powerpc/kernel/head_8xx.S | 3 +- arch/s390/kvm/vsie.c | 2 +- arch/x86/include/asm/kvm_host.h | 2 + arch/x86/kvm/cpuid.c | 4 + arch/x86/kvm/mmu.c | 18 +- arch/x86/xen/enlighten_pv.c | 5 +- drivers/acpi/bus.c | 24 +- drivers/acpi/nfit/core.c | 6 +- drivers/atm/he.c | 2 +- drivers/clk/at91/at91sam9x5.c | 5 +- drivers/clk/at91/sama5d2.c | 4 +- drivers/clk/at91/sama5d4.c | 2 +- drivers/cpufreq/scmi-cpufreq.c | 2 +- drivers/gpio/gpio-mt7621.c | 20 +- drivers/gpio/gpio-pxa.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 2 + drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 12 +- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 5 +- .../amd/display/dc/dce110/dce110_hw_sequencer.c | 7 +- drivers/gpu/drm/i915/intel_fbdev.c | 12 +- drivers/gpu/drm/meson/meson_drv.c | 9 +- drivers/gpu/drm/radeon/radeon_kms.c | 1 + drivers/gpu/drm/sun4i/sun4i_backend.c | 5 +- drivers/hwmon/nct6775.c | 12 +- drivers/hwmon/tmp421.c | 2 +- drivers/infiniband/hw/mthca/mthca_provider.c | 4 +- drivers/infiniband/ulp/srp/ib_srp.c | 10 - drivers/isdn/hardware/avm/b1.c | 2 +- drivers/isdn/i4l/isdn_tty.c | 6 +- drivers/leds/leds-lp5523.c | 4 +- drivers/mfd/Kconfig | 1 + drivers/mfd/ab8500-core.c | 2 +- drivers/mfd/axp20x.c | 126 ++- drivers/mfd/bd9571mwv.c | 1 + drivers/mfd/cros_ec_dev.c | 1 + drivers/mfd/db8500-prcmu.c | 4 +- drivers/mfd/mc13xxx-core.c | 4 +- drivers/mfd/mt6397-core.c | 3 +- drivers/mfd/qcom_rpm.c | 4 + drivers/mfd/ti_am335x_tscadc.c | 5 +- drivers/mfd/tps65218.c | 24 +- drivers/mfd/twl-core.c | 4 +- drivers/mfd/wm5110-tables.c | 2 + drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 6 + drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 6 +- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 22 +- drivers/net/ethernet/mellanox/mlx4/icm.c | 92 +- drivers/net/ethernet/mellanox/mlx4/icm.h | 22 +- drivers/net/ethernet/mellanox/mlx5/core/en.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c | 6 +- drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h | 17 + drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 + drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 1 + drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 25 +- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 6 + drivers/net/ethernet/mellanox/mlxsw/Kconfig | 1 + drivers/net/ethernet/mellanox/mlxsw/pci.c | 4 +- .../ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c | 10 +- .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 12 +- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 4 + drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 6 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 51 +- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 10 + drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 + drivers/net/geneve.c | 10 +- drivers/net/phy/micrel.c | 1 + drivers/net/phy/sfp-bus.c | 2 + drivers/net/phy/sfp.c | 30 +- drivers/net/phy/sfp.h | 2 + drivers/net/team/team.c | 27 +- drivers/net/wan/fsl_ucc_hdlc.c | 62 +- drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 46 +- drivers/pinctrl/pinctrl-max77620.c | 14 +- drivers/pinctrl/qcom/pinctrl-qcs404.c | 2 +- drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 9 +- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 28 +- drivers/scsi/cxgbi/libcxgbi.c | 7 +- drivers/scsi/cxgbi/libcxgbi.h | 5 +- drivers/scsi/isci/init.c | 14 +- drivers/scsi/qedi/qedi_iscsi.c | 3 + drivers/scsi/qedi/qedi_iscsi.h | 1 + drivers/scsi/qla1280.c | 2 +- drivers/scsi/qla4xxx/ql4_os.c | 2 + drivers/scsi/sd_zbc.c | 8 +- drivers/scsi/ufs/ufs.h | 2 +- drivers/scsi/ufs/ufshcd.c | 2 + drivers/soc/fsl/qe/qe_tdm.c | 55 - drivers/staging/erofs/dir.c | 7 +- drivers/staging/erofs/inode.c | 10 +- drivers/staging/erofs/internal.h | 70 +- drivers/staging/erofs/super.c | 19 +- drivers/staging/erofs/unzip_pagevec.h | 2 +- drivers/staging/erofs/unzip_vle.c | 35 +- drivers/staging/erofs/unzip_vle_lz4.c | 2 +- drivers/staging/erofs/utils.c | 12 +- drivers/target/target_core_user.c | 88 +- drivers/vhost/scsi.c | 20 +- drivers/vhost/vhost.c | 8 +- drivers/video/backlight/pwm_bl.c | 19 +- drivers/watchdog/mt7621_wdt.c | 1 + drivers/watchdog/rt2880_wdt.c | 1 + drivers/xen/pvcalls-back.c | 9 +- drivers/xen/pvcalls-front.c | 100 +- fs/afs/flock.c | 4 +- fs/afs/inode.c | 3 +- fs/afs/protocol_yfs.h | 11 + fs/afs/rxrpc.c | 53 +- fs/afs/yfsclient.c | 2 +- fs/ceph/snap.c | 3 +- fs/proc/base.c | 4 - include/keys/user-type.h | 2 +- include/linux/compiler-clang.h | 5 +- include/linux/compiler-gcc.h | 4 - include/linux/compiler-intel.h | 4 +- include/linux/compiler.h | 4 +- include/linux/qed/qed_chain.h | 31 + include/linux/skbuff.h | 2 +- include/linux/virtio_net.h | 19 + include/net/netfilter/nf_flow_table.h | 1 - include/sound/soc.h | 6 + include/trace/events/afs.h | 2 + include/uapi/linux/inet_diag.h | 16 +- kernel/bpf/stackmap.c | 12 +- kernel/trace/trace.c | 2 + kernel/trace/trace_kprobe.c | 10 +- mm/mempolicy.c | 6 +- net/batman-adv/soft-interface.c | 2 + net/bridge/br_fdb.c | 5 + net/bridge/br_multicast.c | 9 +- net/ceph/messenger.c | 15 +- net/core/filter.c | 11 +- net/dsa/port.c | 4 +- net/ipv4/inet_diag.c | 10 +- net/ipv4/netfilter/ipt_CLUSTERIP.c | 19 +- net/ipv6/netfilter.c | 4 +- net/ipv6/seg6.c | 4 +- net/ipv6/sit.c | 3 +- net/ipv6/udp.c | 8 +- net/mac80211/cfg.c | 6 +- net/mac80211/main.c | 4 +- net/mac80211/mesh.h | 6 + net/mac80211/mesh_pathtbl.c | 155 +-- net/mac80211/rx.c | 7 +- net/netfilter/nf_flow_table_core.c | 5 +- net/netfilter/nf_tables_api.c | 5 + net/netfilter/nfnetlink_osf.c | 4 + net/netfilter/nft_compat.c | 3 +- net/netfilter/nft_flow_offload.c | 13 +- net/packet/af_packet.c | 2 +- net/sched/cls_tcindex.c | 80 +- net/sctp/diag.c | 1 + net/sctp/offload.c | 1 + net/sctp/stream.c | 4 +- net/socket.c | 82 +- net/sunrpc/auth_gss/auth_gss.c | 12 +- net/sunrpc/clnt.c | 20 +- net/sunrpc/xprt.c | 1 + net/sunrpc/xprtrdma/verbs.c | 6 +- net/xdp/xdp_umem.c | 16 +- samples/bpf/Makefile | 1 + samples/bpf/asm_goto_workaround.h | 16 + security/keys/key.c | 4 +- security/keys/keyring.c | 4 +- security/keys/proc.c | 3 +- security/keys/request_key.c | 1 + security/keys/request_key_auth.c | 2 +- sound/pci/hda/patch_realtek.c | 42 +- sound/soc/soc-core.c | 11 +- tools/include/uapi/linux/pkt_sched.h | 1163 ++++++++++++++++++++ tools/testing/selftests/bpf/Makefile | 5 +- tools/testing/selftests/bpf/test_progs.c | 30 + tools/testing/selftests/bpf/test_sock_addr.c | 53 +- .../selftests/net/forwarding/bridge_vlan_aware.sh | 47 +- tools/testing/selftests/net/ip_defrag.c | 96 +- tools/testing/selftests/net/ip_defrag.sh | 9 +- .../selftests/tc-testing/tc-tests/actions/ife.json | 88 +- .../tc-testing/tc-tests/actions/tunnel_key.json | 31 +- 188 files changed, 2941 insertions(+), 988 deletions(-)
Greg Kroah-Hartman
maintainerPATCH 1/183 ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mathieu Desnoyers <[email protected]>
commit 0ac569bf6a7983c0c5747d6df8db9dc05bc92b6c upstream.
commit e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE") introduced a regression in optimized kprobes. It triggers "invalid instruction" oopses when using kprobes instrumentation through lttng and perf. This commit was introduced in kernel v4.20, and has been backported to stable kernels 4.19 and 4.14.
This crash was also reported by Hongzhi Song on the redhat bugzilla where the patch was originally introduced.
--- arch/arm/probes/kprobes/opt-arm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/probes/kprobes/opt-arm.c +1 -1
@@ -247,7 +247,7 @@ int arch_prepare_optimized_kprobe(struct }/* Copy arch-dep-instance from template. */ -memcpy (code, (unsigned char *)optprobe_template_entry, +memcpy (code, (unsigned long *)&optprobe_template_entry,TMPL_END_IDX *sizeof (kprobe_opcode_t));/* Adjust buffer according to instruction. */
Greg Kroah-Hartman
maintainerPATCH 2/183 kprobe: Do not use uaccess functions to access kernel memory that can fault
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Changbin Du <[email protected]>
commit 2c4f1fcbef0bc324830bc2fb1a264c08ec93dec5 upstream.
The userspace can ask kprobe to intercept strings at any memory address, including invalid kernel address. In this case, fetch_store_strlen() would crash since it uses general usercopy function, and user access functions are no longer allowed to access kernel memory.
For example, we can crash the kernel by doing something as below:
$ sudo kprobe 'p:do_sys_open +0(+0(%si)):string'
[ 103.620391] BUG: GPF in non-whitelisted uaccess (non-canonical address?) [ 103.622104] general protection fault: 0000 [#1] SMP PTI [ 103.623424] CPU: 10 PID: 1046 Comm: cat Not tainted 5.0.0-rc3-00130-gd73aba1-dirty #96 [ 103.625321] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-2-g628b2e6-dirty-20190104_103505-linux 04/01/2014 [ 103.628284] RIP: 0010:process_fetch_insn+0x1ab/0x4b0 [ 103.629518] Code: 10 83 80 28 2e 00 00 01 31 d2 31 ff 48 8b 74 24 28 eb 0c 81 fa ff 0f 00 00 7f 1c 85 c0 75 18 66 66 90 0f ae e8 48 63 ca 89 f8 <8a> 0c 31 66 66 90 83 c2 01 84 c9 75 dc 89 54 24 34 89 44 24 28 48 [ 103.634032] RSP: 0018:ffff88845eb37ce0 EFLAGS: 00010246 [ 103.635312] RAX: 0000000000000000 RBX: ffff888456c4e5a8 RCX: 0000000000000000 [ 103.637057] RDX: 0000000000000000 RSI: 2e646c2f6374652f RDI: 0000000000000000 [ 103.638795] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 103.640556] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 103.642297] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 103.644040] FS: 0000000000000000(0000) GS:ffff88846f000000(0000) knlGS:0000000000000000 [ 103.646019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 103.647436] CR2: 00007ffc79758038 CR3: 0000000463360006 CR4: 0000000000020ee0 [ 103.649147] Call Trace: [ 103.649781] ? sched_clock_cpu+0xc/0xa0 [ 103.650747] ? do_sys_open+0x5/0x220 [ 103.651635] kprobe_trace_func+0x303/0x380 [ 103.652645] ? do_sys_open+0x5/0x220 [ 103.653528] kprobe_dispatcher+0x45/0x50 [ 103.654682] ? do_sys_open+0x1/0x220 [ 103.655875] kprobe_ftrace_handler+0x90/0xf0 [ 103.657282] ftrace_ops_assist_func+0x54/0xf0 [ 103.658564] ? __call_rcu+0x1dc/0x280 [ 103.659482] 0xffffffffc00000bf [ 103.660384] ? __ia32_sys_open+0x20/0x20 [ 103.661682] ? do_sys_open+0x1/0x220 [ 103.662863] do_sys_open+0x5/0x220 [ 103.663988] do_syscall_64+0x60/0x210 [ 103.665201] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 103.666862] RIP: 0033:0x7fc22fadccdd [ 103.668034] Code: 48 89 54 24 e0 41 83 e2 40 75 32 89 f0 25 00 00 41 00 3d 00 00 41 00 74 24 89 f2 b8 01 01 00 00 48 89 fe bf 9c ff ff ff 0f 05 <48> 3d 00 f0 ff ff 77 33 f3 c3 66 0f 1f 84 00 00 00 00 00 48 8d 44 [ 103.674029] RSP: 002b:00007ffc7972c3a8 EFLAGS: 00000287 ORIG_RAX: 0000000000000101 [ 103.676512] RAX: ffffffffffffffda RBX: 0000562f86147a21 RCX: 00007fc22fadccdd [ 103.678853] RDX: 0000000000080000 RSI: 00007fc22fae1428 RDI: 00000000ffffff9c [ 103.681151] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000 [ 103.683489] R10: 0000000000000000 R11: 0000000000000287 R12: 00007fc22fce90a8 [ 103.685774] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 103.688056] Modules linked in: [ 103.689131] ---[ end trace 43792035c28984a1 ]---
This can be fixed by using probe_mem_read() instead, as it can handle faulting kernel memory addresses, which kprobes can legitimately do.
--- kernel/trace/trace_kprobe.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
kernel/trace/trace_kprobe.c +1 -9
@@ -878,22 +878,14 @@ static const struct file_operations kpro static nokprobe_inline intfetch_store_strlen (unsigned long addr) { -mm_segment_t old_fs;int ret, len =0 ;u8 c; - old_fs =get_fs (); -set_fs (KERNEL_DS ); -pagefault_disable (); -do { - ret =__copy_from_user_inatomic (&c, (u8 *)addr + len,1 ); + ret =probe_mem_read (&c, (u8 *)addr + len,1 ); len++; }while (c && ret ==0 && len <MAX_STRING_SIZE ); -pagefault_enable (); -set_fs (old_fs); -return (ret <0 ) ? ret : len; }
Greg Kroah-Hartman
maintainerPATCH 3/183 tracing: Fix number of entries in trace header
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quentin Perret <[email protected]>
commit 9e7382153f80ba45a0bbcd540fb77d4b15f6e966 upstream.
The following commit
441dae8f2f29 ("tracing: Add support for display of tgid in trace output")
removed the call to print_event_info() from print_func_help_header_irq() which results in the ftrace header not reporting the number of entries written in the buffer. As this wasn't the original intent of the patch, re-introduce the call to print_event_info() to restore the orginal behaviour.
--- kernel/trace/trace.c | 2 ++ 1 file changed, 2 insertions(+)
kernel/trace/trace.c +2 -0
@@ -3384,6 +3384,8 @@ static void print_func_help_header_irq(sconst char tgid_space[] =" " ;const char space[] =" " ; +print_event_info (buf, m); +seq_printf (m,"# %s _-----=> irqs-off\n" , tgid ? tgid_space : space); seq_printf(m, "# %s / _----=> need-resched\n",
Greg Kroah-Hartman
maintainerPATCH 4/183 MIPS: eBPF: Always return sign extended 32b values
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Burton <[email protected]>
commit 13443154f6cac61d148471ede6d7f1f6b5ea946a upstream.
The function prototype used to call JITed eBPF code (ie. the type of the struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64 ABI that MIPS64 kernels target defines that 32 bit integers should always be sign extended when passed in registers as either arguments or return values.
This means that when returning any value which may not already be sign extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform that sign extension in order to comply with the n64 ABI. Without this we see strange looking test failures from test_bpf.ko, such as:
test_bpf: #65 ALU64_MOV_X:
dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times)
Although the return value printed matches the expected value, this is only because printf is only examining the least significant 32 bits of the 64 bit register value we returned. The register holding the expected value is sign extended whilst the v0 register was set to a zero extended value by our JITed code, so when compared by a conditional branch instruction the values are not equal.
We already handle this when the return value register is of type REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT.
--- arch/mips/net/ebpf_jit.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
arch/mips/net/ebpf_jit.c +6 -3
@@ -343,12 +343,15 @@ static int build_int_epilogue(struct jitconst struct bpf_prog *prog = ctx->skf;int stack_adjust = ctx->stack_size;int store_offset = stack_adjust -8 ; +enum reg_val_type td;int r0 =MIPS_R_V0 ; -if (dest_reg ==MIPS_R_RA && -get_reg_val_type (ctx, prog->len,BPF_REG_0 ) ==REG_32BIT_ZERO_EX ) +if (dest_reg ==MIPS_R_RA ) {/* Don't let zero extended value escape. */ -emit_instr (ctx, sll, r0, r0,0 ); + td =get_reg_val_type (ctx, prog->len,BPF_REG_0 ); +if (td ==REG_64BIT || td ==REG_32BIT_ZERO_EX ) +emit_instr (ctx, sll, r0, r0,0 ); + }if (ctx->flags &EBPF_SAVE_RA ) {emit_instr (ctx, ld,MIPS_R_RA , store_offset,MIPS_R_SP );
Greg Kroah-Hartman
maintainerPATCH 5/183 mt76x0u: fix suspend/resume
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislaw Gruszka <[email protected]>
commit d04ca383860bef90a0dab4eb397907f7f05e839e upstream.
We need to reset MCU and do other initializations on resume otherwise MT7610U device will fail to initialize, what cause system hung due to USB requests timeouts.
Patch fixes 4.19 -> 4.20 regression.
--- drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 46 +++++++++++++++--------- 1 file changed, 29 insertions(+), 17 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76x0/usb.c +29 -17
@@ -159,39 +159,49 @@ static const struct ieee80211_ops mt76x0 .wake_tx_queue = mt76_wake_tx_queue, }; -static int mt76x0u_register_device (struct mt76x02_dev *dev) +static int mt76x0u_init_hardware (struct mt76x02_dev *dev) { -struct ieee80211_hw *hw = dev->mt76.hw;int err; - err =mt76u_alloc_queues (&dev->mt76); -if (err <0 ) - goto out_err; - - err =mt76u_mcu_init_rx (&dev->mt76); -if (err <0 ) - goto out_err; -mt76x0_chip_onoff (dev, true, true); -if (!mt76x02_wait_for_mac (&dev->mt76)) { - err = -ETIMEDOUT ; - goto out_err; - } + +if (!mt76x02_wait_for_mac (&dev->mt76)) +return -ETIMEDOUT ; err =mt76x0u_mcu_init (dev);if (err <0 ) - goto out_err; +return err;mt76x0_init_usb_dma (dev); err =mt76x0_init_hardware (dev);if (err <0 ) - goto out_err; +return err;mt76_rmw (dev,MT_US_CYC_CFG ,MT_US_CYC_CNT ,0x1e );mt76_wr (dev,MT_TXOP_CTRL_CFG ,FIELD_PREP (MT_TXOP_TRUN_EN ,0x3f ) |FIELD_PREP (MT_TXOP_EXT_CCA_DLY ,0x58 )); +return 0 ; +} + +static int mt76x0u_register_device (struct mt76x02_dev *dev) +{ +struct ieee80211_hw *hw = dev->mt76.hw; +int err; + + err =mt76u_alloc_queues (&dev->mt76); +if (err <0 ) + goto out_err; + + err =mt76u_mcu_init_rx (&dev->mt76); +if (err <0 ) + goto out_err; + + err =mt76x0u_init_hardware (dev); +if (err <0 ) + goto out_err; + err =mt76x0_register_device (dev);if (err <0 ) goto out_err;
@@ -300,6 +310,8 @@ static int __maybe_unused mt76x0_suspendmt76u_stop_queues (&dev->mt76);mt76x0u_mac_stop (dev); +clear_bit (MT76_STATE_MCU_RUNNING , &dev->mt76.state); +mt76x0_chip_onoff (dev, false, false);usb_kill_urb (usb->mcu.res.urb);return 0 ;
@@ -327,7 +339,7 @@ static int __maybe_unused mt76x0_resume(tasklet_enable (&usb->rx_tasklet);tasklet_enable (&usb->tx_tasklet); - ret =mt76x0_init_hardware (dev); + ret =mt76x0u_init_hardware (dev);if (ret) goto err;
Greg Kroah-Hartman
maintainerPATCH 6/183 gpio: MT7621: use a per instance irq_chip structure
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: René van Dorst <[email protected]>
commit fa84667b98fd1a191b2465d66b440bda6714b3bf upstream.
This fixes the kernel complains:
gpio gpiochip1: (1e000600.gpio-bank1): detected irqchip that is shared
with multiple gpiochips: please fix the driver.
gpio gpiochip2: (1e000600.gpio-bank2): detected irqchip that is shared
with multiple gpiochips: please fix the driver.
--- drivers/gpio/gpio-mt7621.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/gpio/gpio-mt7621.c +10 -10
@@ -30,6 +30,7 @@#define GPIO_REG_EDGE 0xA0struct mtk_gc { +struct irq_chip irq_chip;struct gpio_chip chip;spinlock_t lock;int bank;
@@ -189,13 +190,6 @@ mediatek_gpio_irq_type(struct irq_data *return 0 ; } -static struct irq_chip mediatek_gpio_irq_chip = { - .irq_unmask = mediatek_gpio_irq_unmask, - .irq_mask = mediatek_gpio_irq_mask, - .irq_mask_ack = mediatek_gpio_irq_mask, - .irq_set_type = mediatek_gpio_irq_type, -}; -static int mediatek_gpio_xlate (struct gpio_chip *chip,const struct of_phandle_args *spec,u32 *flags)
@@ -254,6 +248,13 @@ mediatek_gpio_bank_probe(struct device *return ret; } + rg->irq_chip.name =dev_name (dev); + rg->irq_chip.parent_device = dev; + rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask; + rg->irq_chip.irq_mask = mediatek_gpio_irq_mask; + rg->irq_chip.irq_mask_ack = mediatek_gpio_irq_mask; + rg->irq_chip.irq_set_type = mediatek_gpio_irq_type; +if (mtk->gpio_irq) {/* * Manually request the irq here instead of passing
@@ -270,14 +271,14 @@ mediatek_gpio_bank_probe(struct device *return ret; } - ret =gpiochip_irqchip_add (&rg->chip, &mediatek_gpio_irq_chip, + ret =gpiochip_irqchip_add (&rg->chip, &rg->irq_chip,0 , handle_simple_irq,IRQ_TYPE_NONE );if (ret) {dev_err (dev,"failed to add gpiochip_irqchip\n" );return ret; } -gpiochip_set_chained_irqchip (&rg->chip, &mediatek_gpio_irq_chip, +gpiochip_set_chained_irqchip (&rg->chip, &rg->irq_chip, mtk->gpio_irq,NULL ); }
@@ -310,7 +311,6 @@ mediatek_gpio_probe(struct platform_devi mtk->gpio_irq =irq_of_parse_and_map (np,0 ); mtk->dev = dev;platform_set_drvdata (pdev, mtk); - mediatek_gpio_irq_chip.name =dev_name (dev);for (i =0 ; i <MTK_BANK_CNT ; i++) { ret =mediatek_gpio_bank_probe (dev, np, i);
_______________________________________________
Linux-mediatek mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-mediatek
Greg Kroah-Hartman
maintainerPATCH 7/183 gpio: pxa: avoid attempting to set pin direction via pinctrl on MMP2
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lubomir Rintel <[email protected]>
commit af14b2c98adb85e9517390bb88309338b9075350 upstream.
Similarly to PXA3xx, pinctrl-single can't set pin direction on MMP2 either. See also: commit 9dabfdd84bdfa ("gpio: pxa: disable pinctrl calls for PXA3xx")
--- drivers/gpio/gpio-pxa.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpio/gpio-pxa.c +1 -0
@@ -245,6 +245,7 @@ static bool pxa_gpio_has_pinctrl(void) {switch (gpio_type) {case PXA3XX_GPIO : +case MMP2_GPIO :return false;default :
Greg Kroah-Hartman
maintainerPATCH 8/183 mac80211: Restore vif beacon interval if start ap fails
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rakesh Pillai <[email protected]>
commit 83e37e0bdd1470bbe6612250b745ad39b1a7b130 upstream.
The starting of AP interface can fail due to invalid beacon interval, which does not match the minimum gcd requirement set by the wifi driver. In such case, the beacon interval of that interface gets updated with that invalid beacon interval.
The next time that interface is brought up in AP mode, an interface combination check is performed and the beacon interval is taken from the previously set value.
In a case where an invalid beacon interval, i.e. a beacon interval value which does not satisfy the minimum gcd criteria set by the driver, is set, all the subsequent trials to bring that interface in AP mode will fail, even if the subsequent trials have a valid beacon interval.
To avoid this, in case of a failure in bringing up an interface in AP mode due to interface combination error, the interface beacon interval which is stored in bss conf, needs to be restored with the last working value of beacon interval.
Tested on ath10k using WCN3990.
--- net/mac80211/cfg.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
net/mac80211/cfg.c +5 -1
@@ -941,6 +941,7 @@ static int ieee80211_start_ap(struct wipBSS_CHANGED_P2P_PS |BSS_CHANGED_TXPOWER ;int err; +int prev_beacon_int; old =sdata_dereference (sdata->u.ap.beacon, sdata);if (old)
@@ -963,6 +964,7 @@ static int ieee80211_start_ap(struct wip sdata->needed_rx_chains = sdata->local->rx_chains; + prev_beacon_int = sdata->vif.bss_conf.beacon_int; sdata->vif.bss_conf.beacon_int = params->beacon_interval;if (params->he_cap)
@@ -974,8 +976,10 @@ static int ieee80211_start_ap(struct wipif (!err)ieee80211_vif_copy_chanctx_to_vlans (sdata, false);mutex_unlock (&local->mtx); -if (err) +if (err) { + sdata->vif.bss_conf.beacon_int = prev_beacon_int;return err; + }/* * Apply control port protocol, this allows us to
Greg Kroah-Hartman
maintainerPATCH 9/183 mac80211: Use linked list instead of rhashtable walk for mesh tables
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit b4c3fbe6360178dc2181b7b43b7ae793a192b282 upstream.
The mesh table code walks over hash tables for two purposes. First of all it's used as part of a netlink dump process, but it is also used for looking up entries to delete using criteria other than the hash key.
The second purpose is directly contrary to the design specification of rhashtable walks. It is only meant for use by netlink dumps.
This is because rhashtable is resizable and you cannot obtain a stable walk over it during a resize process.
In fact mesh's use of rhashtable for dumping is bogus too. Rather than using rhashtable walk's iterator to keep track of the current position, it always converts the current position to an integer which defeats the purpose of the iterator.
Therefore this patch converts all uses of rhashtable walk into a simple linked list.
This patch also adds a new spin lock to protect the hash table insertion/removal as well as the walk list modifications. In fact the previous code was buggy as the removals can race with each other, potentially resulting in a double-free.
--- net/mac80211/mesh.h | 6 + net/mac80211/mesh_pathtbl.c | 138 +++++++++++--------------------------------- 2 files changed, 43 insertions(+), 101 deletions(-)
net/mac80211/mesh.h +6 -0
@@ -70,6 +70,7 @@ enum mesh_deferred_task_flags {* @dst: mesh path destination mac address * @mpp: mesh proxy mac address * @rhash: rhashtable list pointer +* @walk_list: linked list containing all mesh_path objects. * @gate_list: list pointer for known gates list * @sdata: mesh subif * @next_hop: mesh neighbor to which frames for this destination will be
@@ -105,6 +106,7 @@ struct mesh_path {u8 dst[ETH_ALEN ];u8 mpp[ETH_ALEN ];/* used for MPP or MAP */ struct rhash_head rhash; +struct hlist_node walk_list;struct hlist_node gate_list;struct ieee80211_sub_if_data *sdata;struct sta_info __rcu *next_hop;
@@ -133,12 +135,16 @@ struct mesh_path {* gate's mpath may or may not be resolved and active. * @gates_lock: protects updates to known_gates * @rhead: the rhashtable containing struct mesh_paths, keyed by dest addr +* @walk_head: linked list containging all mesh_path objects +* @walk_lock: lock protecting walk_head * @entries: number of entries in the table */ struct mesh_table {struct hlist_head known_gates;spinlock_t gates_lock;struct rhashtable rhead; +struct hlist_head walk_head; +spinlock_t walk_lock;atomic_t entries;/* Up to MAX_MESH_NEIGHBOURS */ };
net/mac80211/mesh_pathtbl.c +37 -101
250 lines not on this page · raw message
Greg Kroah-Hartman
maintainerPATCH 10/183 mac80211: Free mpath object when rhashtable insertion fails
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <[email protected]>
commit 4ff3a9d14c6c06eaa4e5976c61599ea2bd9e81b2 upstream.
When rhashtable insertion fails the mesh table code doesn't free the now-orphan mesh path object. This patch fixes that.
--- net/mac80211/mesh_pathtbl.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
net/mac80211/mesh_pathtbl.c +9 -8
@@ -436,17 +436,15 @@ struct mesh_path *mesh_path_add(struct i }while (unlikely (ret == -EEXIST && !mpath));spin_unlock_bh (&tbl->walk_lock); -if (ret && ret != -EEXIST ) -return ERR_PTR (ret); - -/* At this point either new_mpath was added, or we found a -* matching entry already in the table; in the latter case -* free the unnecessary new entry. -*/ -if (ret == -EEXIST ) { +if (ret) {kfree (new_mpath); + +if (ret != -EEXIST ) +return ERR_PTR (ret); + new_mpath = mpath; } + sdata->u.mesh.mesh_paths_generation++;return new_mpath; }
@@ -481,6 +479,9 @@ int mpp_path_add(struct ieee80211_sub_ifhlist_add_head_rcu (&new_mpath->walk_list, &tbl->walk_head);spin_unlock_bh (&tbl->walk_lock); +if (ret) +kfree (new_mpath); + sdata->u.mesh.mpp_paths_generation++;return ret; }
Greg Kroah-Hartman
maintainerPATCH 11/183 pinctrl: qcom: qcs404: Correct SDC tile
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Bjorn Andersson <[email protected]>
commit a5a08c35d382a5a8da397260c3febb8dff4bdeef upstream.
The SDC controls live in the south tile, not the north one. Correct this so that we program the right registers.
--- drivers/pinctrl/qcom/pinctrl-qcs404.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/qcom/pinctrl-qcs404.c +1 -1
@@ -79,7 +79,7 @@ enum { .intr_cfg_reg = 0, \ .intr_status_reg = 0, \ .intr_target_reg = 0, \ - .tile = NORTH, \ + .tile = SOUTH, \ .mux_bit = -1, \ .pull_bit = pull, \ .drv_bit = drv, \
Greg Kroah-Hartman
maintainerPATCH 12/183 libceph: handle an empty authorize reply
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <[email protected]>
commit 0fd3fd0a9bb0b02b6435bb7070e9f7b82a23f068 upstream.
The authorize reply can be empty, for example when the ticket used to build the authorizer is too old and TAG_BADAUTHORIZER is returned from the service. Calling ->verify_authorizer_reply() results in an attempt to decrypt and validate (somewhat) random data in au->buf (most likely the signature block from calc_signature()), which fails and ends up in con_fault_finish() with !con->auth_retry. The ticket isn't invalidated and the connection is retried again and again until a new ticket is obtained from the monitor:
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
libceph: osd2 192.168.122.1:6809 bad authorize reply
Let TAG_BADAUTHORIZER handler kick in and increment con->auth_retry.
--- net/ceph/messenger.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-)
net/ceph/messenger.c +9 -6
@@ -2071,6 +2071,8 @@ static int process_connect(struct ceph_cdout ("process_connect on %p tag %d\n" , con, (int )con->in_tag);if (con->auth) { +int len =le32_to_cpu (con->in_reply.authorizer_len); +/* * Any connection that defines ->get_authorizer() * should also define ->add_authorizer_challenge() and
@@ -2080,8 +2082,7 @@ static int process_connect(struct ceph_c*/ if (con->in_reply.tag ==CEPH_MSGR_TAG_CHALLENGE_AUTHORIZER ) { ret = con->ops->add_authorizer_challenge ( - con, con->auth->authorizer_reply_buf, -le32_to_cpu (con->in_reply.authorizer_len)); + con, con->auth->authorizer_reply_buf, len);if (ret <0 )return ret;
@@ -2091,10 +2092,12 @@ static int process_connect(struct ceph_creturn 0 ; } - ret = con->ops->verify_authorizer_reply (con); -if (ret <0 ) { - con->error_msg ="bad authorize reply" ; -return ret; +if (len) { + ret = con->ops->verify_authorizer_reply (con); +if (ret <0 ) { + con->error_msg ="bad authorize reply" ; +return ret; + } } }
Greg Kroah-Hartman
maintainerPATCH 13/183 ceph: avoid repeatedly adding inode to mdsc->snap_flush_list
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yan, Zheng <[email protected]>
commit 04242ff3ac0abbaa4362f97781dac268e6c3541a upstream.
Otherwise, mdsc->snap_flush_list may get corrupted.
--- fs/ceph/snap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
fs/ceph/snap.c +2 -1
@@ -616,7 +616,8 @@ int __ceph_finish_cap_snap(struct ceph_i capsnap->size);spin_lock (&mdsc->snap_flush_lock); -list_add_tail (&ci->i_snap_flush_item, &mdsc->snap_flush_list); +if (list_empty (&ci->i_snap_flush_item)) +list_add_tail (&ci->i_snap_flush_item, &mdsc->snap_flush_list);spin_unlock (&mdsc->snap_flush_lock);return 1 ;/* caller may want to ceph_flush_snaps */ }
Greg Kroah-Hartman
maintainerPATCH 14/183 numa: change get_mempolicy() to use nr_node_ids instead of MAX_NUMNODES
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ralph Campbell <[email protected]>
commit 050c17f239fd53adb55aa768d4f41bc76c0fe045 upstream.
The system call, get_mempolicy() [1], passes an unsigned long *nodemask pointer and an unsigned long maxnode argument which specifies the length of the user's nodemask array in bits (which is rounded up). The manual page says that if the maxnode value is too small, get_mempolicy will return EINVAL but there is no system call to return this minimum value. To determine this value, some programs search /proc/<pid>/status for a line starting with "Mems_allowed:" and use the number of digits in the mask to determine the minimum value. A recent change to the way this line is formatted [2] causes these programs to compute a value less than MAX_NUMNODES so get_mempolicy() returns EINVAL.
Change get_mempolicy(), the older compat version of get_mempolicy(), and the copy_nodes_to_user() function to use nr_node_ids instead of MAX_NUMNODES, thus preserving the defacto method of computing the minimum size for the nodemask array and the maxnode argument.
[1] http://man7.org/linux/man-pages/man2/get_mempolicy.2.html
[2] https://lore.kernel.org/lkml/[email protected]
--- mm/mempolicy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
mm/mempolicy.c +3 -3
@@ -1314,7 +1314,7 @@ static int copy_nodes_to_user(unsigned l nodemask_t *nodes) {unsigned long copy =ALIGN (maxnode-1 ,64 ) /8 ; -const int nbytes =BITS_TO_LONGS (MAX_NUMNODES ) *sizeof (long ); +unsigned int nbytes =BITS_TO_LONGS (nr_node_ids) *sizeof (long );if (copy > nbytes) {if (copy >PAGE_SIZE )
@@ -1491,7 +1491,7 @@ static int kernel_get_mempolicy(int __usint uninitialized_var (pval );nodemask_t nodes; -if (nmask !=NULL && maxnode <MAX_NUMNODES ) +if (nmask !=NULL && maxnode < nr_node_ids)return -EINVAL ; err =do_get_mempolicy (&pval, &nodes, addr, flags);
@@ -1527,7 +1527,7 @@ COMPAT_SYSCALL_DEFINE5(get_mempolicy, inunsigned long nr_bits, alloc_size;DECLARE_BITMAP (bm,MAX_NUMNODES ); - nr_bits = min_t(unsigned long, maxnode-1, MAX_NUMNODES); + nr_bits = min_t(unsigned long, maxnode-1, nr_node_ids); alloc_size =ALIGN (nr_bits,BITS_PER_LONG ) /8 ;if (nmask)
Greg Kroah-Hartman
maintainerPATCH 15/183 proc, oom: do not report alien mms when setting oom_score_adj
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Hocko <[email protected]>
commit b2b469939e93458753cfbf8282ad52636495965e upstream.
Tetsuo has reported that creating a thousands of processes sharing MM without SIGHAND (aka alien threads) and setting /proc/<pid>/oom_score_adj will swamp the kernel log and takes ages [1] to finish. This is especially worrisome that all that printing is done under RCU lock and this can potentially trigger RCU stall or softlockup detector.
The primary reason for the printk was to catch potential users who might depend on the behavior prior to 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj") but after more than 2 years without a single report I guess it is safe to simply remove the printk altogether.
The next step should be moving oom_score_adj over to the mm struct and remove all the tasks crawling as suggested by [2]
[1] http://lkml.kernel.org/r/[email protected]
[2] http://lkml.kernel.org/r/[email protected]
--- fs/proc/base.c | 4 ---- 1 file changed, 4 deletions(-)
fs/proc/base.c +0 -4
@@ -1084,10 +1084,6 @@ static int __set_oom_adj(struct file *fitask_lock (p);if (!p->vfork_done &&process_shares_mm (p, mm)) { -pr_info ("updating oom_score_adj for %d (%s) from %d to %d because it shares mm with %d (%s). Report if this is unexpected.\n" , -task_pid_nr (p), p->comm, - p->signal->oom_score_adj, oom_adj, -task_pid_nr (task), task->comm); p->signal->oom_score_adj = oom_adj;if (!legacy &&has_capability_noaudit (current,CAP_SYS_RESOURCE )) p->signal->oom_score_adj_min = (short )oom_adj;
Greg Kroah-Hartman
maintainerPATCH 16/183 ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeremy Soller <[email protected]>
commit 7f665b1c3283aae5b61843136d0a8ee808ba3199 upstream.
On the System76 Oryx Pro (oryp5), there is a headset microphone input attached to 0x19 that does not have a jack detect. In order to get it working, the pin configuration needs to be set correctly, and the ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we have a separate microphone jack that is already configured correctly.
Since the ALC1220 does not have a fixup similar to ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, I have exposed the fixup from the ALC269 in a way that it can be accessed from the alc1220_fixup_system76_oryp5 function. In addition, the alc1220_fixup_clevo_p950 needs to be applied to gain speaker output.
--- sound/pci/hda/patch_realtek.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
sound/pci/hda/patch_realtek.c +28 -0
@@ -1855,6 +1855,8 @@ enum {ALC887_FIXUP_BASS_CHMAP ,ALC1220_FIXUP_GB_DUAL_CODECS ,ALC1220_FIXUP_CLEVO_P950 , +ALC1220_FIXUP_SYSTEM76_ORYP5 , + ALC1220_FIXUP_SYSTEM76_ORYP5_PINS, }; static void alc889_fixup_coef(struct hda_codec *codec,
@@ -2056,6 +2058,17 @@ static void alc1220_fixup_clevo_p950(strsnd_hda_override_conn_list (codec,0x1b ,1 , conn1); } +static void alc_fixup_headset_mode_no_hp_mic (struct hda_codec *codec, +const struct hda_fixup *fix,int action); + +static void alc1220_fixup_system76_oryp5 (struct hda_codec *codec, +const struct hda_fixup *fix, +int action) +{ +alc1220_fixup_clevo_p950 (codec, fix, action); +alc_fixup_headset_mode_no_hp_mic (codec, fix, action); +} +static const struct hda_fixup alc882_fixups[] = { [ALC882_FIXUP_ABIT_AW9D_MAX ] = { .type =HDA_FIXUP_PINS ,
@@ -2300,6 +2313,19 @@ static const struct hda_fixup alc882_fix .type = HDA_FIXUP_FUNC, .v.func = alc1220_fixup_clevo_p950, }, + [ALC1220_FIXUP_SYSTEM76_ORYP5] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc1220_fixup_system76_oryp5, + }, + [ALC1220_FIXUP_SYSTEM76_ORYP5_PINS] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl []) { + {0x19 ,0x01a1913c },/* use as headset mic, without its own jack detect */ + {} + }, + .chained = true, + .chain_id = ALC1220_FIXUP_SYSTEM76_ORYP5, + }, };static const struct snd_pci_quirk alc882_fixup_tbl[] = {
@@ -2376,6 +2402,8 @@ static const struct snd_pci_quirk alc882SND_PCI_QUIRK (0x1558 ,0x9501 ,"Clevo P950HR" ,ALC1220_FIXUP_CLEVO_P950 ),SND_PCI_QUIRK (0x1558 ,0x95e1 ,"Clevo P95xER" ,ALC1220_FIXUP_CLEVO_P950 ),SND_PCI_QUIRK (0x1558 ,0x95e2 ,"Clevo P950ER" ,ALC1220_FIXUP_CLEVO_P950 ), +SND_PCI_QUIRK (0x1558 ,0x96e1 ,"System76 Oryx Pro (oryp5)" ,ALC1220_FIXUP_SYSTEM76_ORYP5_PINS ), +SND_PCI_QUIRK (0x1558 ,0x97e1 ,"System76 Oryx Pro (oryp5)" ,ALC1220_FIXUP_SYSTEM76_ORYP5_PINS ),SND_PCI_QUIRK_VENDOR (0x1558 ,"Clevo laptop" ,ALC882_FIXUP_EAPD ),SND_PCI_QUIRK (0x161f ,0x2054 ,"Medion laptop" ,ALC883_FIXUP_EAPD ), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Y530", ALC882_FIXUP_LENOVO_Y530),
Greg Kroah-Hartman
maintainerPATCH 17/183 ALSA: hda/realtek: Disable PC beep in passthrough on alc285
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hui Wang <[email protected]>
commit c8c6ee611926685a7d753409e0a6e48b9e1b8748 upstream.
It is reported that there's a constant background "hum/whitenoise" in the headset on the Lenovo X1 machines with the codec alc285, and it is confirmed that if we run the command below, the noise will stop.
sudo hda-verb /dev/snd/hwC0D0 0x1d SET_PIN_WIDGET_CONTROL 0x0
Then I consulted this issue with Kailang, he told me the pin 0x1d on this codec is used for PC beep in, the noise probably comes from this pin and we can also disable the PC beep in passthrough, then the PC beep in will not affect other sound playback.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1660581
--- sound/pci/hda/patch_realtek.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
sound/pci/hda/patch_realtek.c +13 -1
@@ -5601,6 +5601,7 @@ enum {ALC294_FIXUP_ASUS_HEADSET_MIC ,ALC294_FIXUP_ASUS_SPK ,ALC293_FIXUP_SYSTEM76_MIC_NO_PRESENCE , + ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE, }; static const struct hda_fixup alc269_fixups[] = {
@@ -6534,6 +6535,17 @@ static const struct hda_fixup alc269_fix .chained = true, .chain_id =ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC }, + [ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb []) { +/* Disable PCBEEP-IN passthrough */ + {0x20 ,AC_VERB_SET_COEF_INDEX ,0x36 }, + {0x20 ,AC_VERB_SET_PROC_COEF ,0x57d7 }, + { } + }, + .chained = true, + .chain_id =ALC285_FIXUP_LENOVO_HEADPHONE_NOISE + }, };static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -7215,7 +7227,7 @@ static const struct snd_hda_pin_quirk al {0x12, 0x90a60130}, {0x19, 0x03a11020}, {0x21, 0x0321101f}), - SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_LENOVO_HEADPHONE_NOISE, + SND_HDA_PIN_QUIRK(0x10ec0285, 0x17aa, "Lenovo", ALC285_FIXUP_LENOVO_PC_BEEP_IN_NOISE, {0x12, 0x90a60130}, {0x14, 0x90170110}, {0x19, 0x04a11040},
Greg Kroah-Hartman
maintainerPATCH 18/183 KEYS: allow reaching the keys quotas exactly
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Biggers <[email protected]>
commit a08bf91ce28ed3ae7b6fef35d843fef8dc8c2cd9 upstream.
If the sysctl 'kernel.keys.maxkeys' is set to some number n, then actually users can only add up to 'n - 1' keys. Likewise for 'kernel.keys.maxbytes' and the root_* versions of these sysctls. But these sysctls are apparently supposed to be *maximums*, as per their names and all documentation I could find -- the keyrings(7) man page, Documentation/security/keys/core.rst, and all the mentions of EDQUOT meaning that the key quota was *exceeded* (as opposed to reached).
Thus, fix the code to allow reaching the quotas exactly.
--- security/keys/key.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
security/keys/key.c +2 -2
@@ -265,8 +265,8 @@ struct key *key_alloc(struct key_type *tspin_lock (&user->lock);if (!(flags &KEY_ALLOC_QUOTA_OVERRUN )) { -if (user->qnkeys +1 >= maxkeys || - user->qnbytes + quotalen >= maxbytes || +if (user->qnkeys +1 > maxkeys || + user->qnbytes + quotalen > maxbytes || user->qnbytes + quotalen < user->qnbytes) goto no_quota; }
Greg Kroah-Hartman
maintainerPATCH 19/183 backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 61170ee9386888f1e6f7e9cc58e8d9a8c2a3c1dd ]
Commit 88ba95bedb79 ("backlight: pwm_bl: Compute brightness of LED linearly to human eye") made the parse-dt function return early when using an auto- generated brightness-table, but didn't take into account that some more settings were handled below the brightness handling, like power-on-delays and also setting the pdata enable-gpio to -EINVAL.
This surfaces for example in the case of a backlight without any enable-gpio which then tries to use gpio-0 in error.
Fix this by simply moving the trailing settings above the brightness handling.
--- drivers/video/backlight/pwm_bl.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
drivers/video/backlight/pwm_bl.c +10 -9
@@ -268,6 +268,16 @@ static int pwm_backlight_parse_dt(struct device *dev,memset (data,0 ,sizeof (*data)); +/* +* These values are optional and set as 0 by default, the out values +* are modified only if a valid u32 value can be decoded. +*/ +of_property_read_u32 (node,"post-pwm-on-delay-ms" , + &data->post_pwm_on_delay); +of_property_read_u32 (node,"pwm-off-delay-ms" , &data->pwm_off_delay); + + data->enable_gpio = -EINVAL ; +/* * Determine the number of brightness levels, if this property is not * set a default table of brightness levels will be used.
@@ -380,15 +390,6 @@ static int pwm_backlight_parse_dt(struct device *dev, data->max_brightness--; } -/* -* These values are optional and set as 0 by default, the out values -* are modified only if a valid u32 value can be decoded. -*/ -of_property_read_u32 (node,"post-pwm-on-delay-ms" , - &data->post_pwm_on_delay); -of_property_read_u32 (node,"pwm-off-delay-ms" , &data->pwm_off_delay); - - data->enable_gpio = -EINVAL ;return 0 ; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 20/183 mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cells
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b40ee006fe6a8a25093434e5d394128c356a48f3 ]
Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that different instances are uniquely identified. This is required in order to support registering of multiple instances of same ti_am335x_tscadc IP.
--- drivers/mfd/ti_am335x_tscadc.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/mfd/ti_am335x_tscadc.c +3 -2
@@ -264,8 +264,9 @@ static int ti_tscadc_probe(struct platform_device *pdev) cell->pdata_size =sizeof (tscadc); } - err =mfd_add_devices (&pdev->dev, pdev->id, tscadc->cells, - tscadc->used_cells,NULL ,0 ,NULL ); + err =mfd_add_devices (&pdev->dev,PLATFORM_DEVID_AUTO , + tscadc->cells, tscadc->used_cells,NULL , +0 ,NULL );if (err <0 ) goto err_disable_clk;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 21/183 pvcalls-front: read all data before closing the connection
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b79470b64fa9266948d1ce8d825ced94c4f63293 ]
When a connection is closing in_error is set to ENOTCONN. There could still be outstanding data on the ring left by the backend. Before closing the connection on the frontend side, drain the ring.
--- drivers/xen/pvcalls-front.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/xen/pvcalls-front.c +1 -3
@@ -560,15 +560,13 @@ static int __read_ring(struct pvcalls_data_intf *intf, error = intf->in_error;/* get pointers before reading from the ring */ virt_rmb (); -if (error <0 ) -return error; size =pvcalls_queued (prod, cons, array_size); masked_prod =pvcalls_mask (prod, array_size); masked_cons =pvcalls_mask (cons, array_size);if (size ==0 ) -return 0 ; +return error ?: size;if (len > size) len = size;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 22/183 pvcalls-front: dont try to free unallocated rings
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 96283f9a084e23d7cda2d3c5d1ffa6df6cf1ecec ]
inflight_req_id is 0 when initialized. If inflight_req_id is 0, there is no accept_map to free. Fix the check in pvcalls_front_release.
--- drivers/xen/pvcalls-front.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/xen/pvcalls-front.c +2 -2
@@ -1030,8 +1030,8 @@ int pvcalls_front_release(struct socket *sock)spin_lock (&bedata->socket_lock);list_del (&map->list);spin_unlock (&bedata->socket_lock); -if (READ_ONCE (map->passive.inflight_req_id) != -PVCALLS_INVALID_ID ) { +if (READ_ONCE (map->passive.inflight_req_id) !=PVCALLS_INVALID_ID && +READ_ONCE (map->passive.inflight_req_id) !=0 ) {pvcalls_front_free_map (bedata, map->passive.accept_map); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 23/183 pvcalls-front: properly allocate sk
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit beee1fbe8f7d57d6ebaa5188f9f4db89c2077196 ]
Don't use kzalloc: it ends up leaving sk->sk_prot not properly initialized. Use sk_alloc instead and define our own trivial struct proto.
--- drivers/xen/pvcalls-front.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
drivers/xen/pvcalls-front.c +7 -1
@@ -31,6 +31,12 @@#define PVCALLS_NR_RSP_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)#define PVCALLS_FRONT_MAX_SPIN 5000 +static struct proto pvcalls_proto = { + .name ="PVCalls" , + .owner =THIS_MODULE , + .obj_size =sizeof (struct sock ), +}; +struct pvcalls_bedata {struct xen_pvcalls_front_ring ring;grant_ref_t ref;
@@ -837,7 +843,7 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags) received: map2->sock = newsock; - newsock->sk =kzalloc (sizeof (*newsock->sk),GFP_KERNEL ); + newsock->sk =sk_alloc (sock_net (sock->sk),PF_INET ,GFP_KERNEL , &pvcalls_proto, false);if (!newsock->sk) { bedata->rsp[req_id].req_id =PVCALLS_INVALID_ID ; map->passive.inflight_req_id =PVCALLS_INVALID_ID ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 24/183 pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e6587cdbd732eacb4c7ce592ed46f7bbcefb655f ]
When a connection is closing we receive on pvcalls_sk_state_change notification. Instead of setting the connection as closed immediately (-ENOTCONN), let's read one more time from it: pvcalls_conn_back_read will set the connection as closed when necessary.
That way, we avoid races between pvcalls_sk_state_change and pvcalls_back_ioworker.
--- drivers/xen/pvcalls-back.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/xen/pvcalls-back.c +4 -3
@@ -160,9 +160,10 @@ static void pvcalls_conn_back_read(void *opaque)/* write the data, then modify the indexes */ virt_wmb (); -if (ret <0 ) +if (ret <0 ) { +atomic_set (&map->read,0 ); intf->in_error = ret; -else + }else intf->in_prod = prod + ret;/* update the indexes, then notify the other end */ virt_wmb ();
@@ -288,7 +289,7 @@ static void pvcalls_sk_state_change(struct sock *sock)return ; intf = map->ring; - intf->in_error = -ENOTCONN ; +atomic_inc (&map->read);notify_remote_via_irq (map->irq); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 25/183 mfd: twl-core: Fix section annotations on {,un}protect_pm_master
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8838555089f0345b87f4277fe5a8dd647dc65589 ]
When building the kernel with Clang, the following section mismatch warning appears:
WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from the function twl_probe() to the function .init.text:unprotect_pm_master()
The function twl_probe() references
the function __init unprotect_pm_master().
This is often because twl_probe lacks a __init
annotation or the annotation of unprotect_pm_master is wrong.
Remove the __init annotation on the *protect_pm_master functions so there is no more mismatch.
--- drivers/mfd/twl-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mfd/twl-core.c +2 -2
@@ -979,7 +979,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base,* letting it generate the right frequencies for USB, MADC, and * other purposes. */ -static inline int __init protect_pm_master (void ) +static inline int protect_pm_master (void ) {int e =0 ;
@@ -988,7 +988,7 @@ static inline int __init protect_pm_master(void)return e; } -static inline int __init unprotect_pm_master (void ) +static inline int unprotect_pm_master (void ) {int e =0 ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 26/183 mfd: db8500-prcmu: Fix some section annotations
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a3888f62fe66429fad3be7f2ba962e1e08c26fd6 ]
When building the kernel with Clang, the following section mismatch warnings appear:
WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:init_prcm_registers()
The function db8500_prcmu_probe() references
the function __init init_prcm_registers().
This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of init_prcm_registers is wrong.
WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:fw_project_name()
The function db8500_prcmu_probe() references
the function __init fw_project_name().
This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of fw_project_name is wrong.
db8500_prcmu_probe should not be marked as __init so remove the __init annotation from fw_project_name and init_prcm_registers.
--- drivers/mfd/db8500-prcmu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/mfd/db8500-prcmu.c +2 -2
@@ -2584,7 +2584,7 @@ static struct irq_chip prcmu_irq_chip = { .irq_unmask = prcmu_irq_unmask, }; -static __init char *fw_project_name (u32 project) +static char *fw_project_name (u32 project) {switch (project) {case PRCMU_FW_PROJECT_U8500 :
@@ -2732,7 +2732,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size)INIT_WORK (&mb0_transfer.mask_work, prcmu_mask_work); } -static void __init init_prcm_registers (void ) +static void init_prcm_registers (void ) {u32 val;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 27/183 mfd: mt6397: Do not call irq_domain_remove if PMIC unsupported
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a177276aa098aa47a100d51a13eaaef029604b6d ]
If the PMIC ID is unknown, the current code would call irq_domain_remove and panic, as pmic->irq_domain is only initialized by mt6397_irq_init.
Return immediately with an error, if the chip ID is unsupported.
--- drivers/mfd/mt6397-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/mfd/mt6397-core.c +1 -2
@@ -329,8 +329,7 @@ static int mt6397_probe(struct platform_device *pdev)default :dev_err (&pdev->dev,"unsupported chip: %d\n" , id); - ret = -ENODEV ; -break ; +return -ENODEV ; }if (ret) {
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 28/183 mfd: ab8500-core: Return zero in get_register_interruptible()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 10628e3ecf544fa2e4e24f8e112d95c37884dc98 ]
This function is supposed to return zero on success or negative error codes on error. Unfortunately, there is a bug so it sometimes returns non-zero, positive numbers on success.
I noticed this bug during review and I can't test it. It does appear that the return is sometimes propogated back to _regmap_read() where all non-zero returns are treated as failure so this may affect run time.
--- drivers/mfd/ab8500-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mfd/ab8500-core.c +1 -1
@@ -261,7 +261,7 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,mutex_unlock (&ab8500->lock);dev_vdbg (ab8500->dev,"rd: addr %#x => data %#x\n" , addr, ret); -return ret; +return (ret <0 ) ? ret :0 ; } static int ab8500_get_register(struct device *dev, u8 bank,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 29/183 mfd: bd9571mwv: Add volatile register to make DVFS work
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b0aff01e7aa6ad2d6998ef1323843212d1db8b04 ]
Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table, the physical register value is not updated by regmap and DVFS doesn't work as expected. Fix it!
--- drivers/mfd/bd9571mwv.c | 1 + 1 file changed, 1 insertion(+)
drivers/mfd/bd9571mwv.c +1 -0
@@ -59,6 +59,7 @@ static const struct regmap_access_table bd9571mwv_writable_table = { };static const struct regmap_range bd9571mwv_volatile_yes_ranges[] = { +regmap_reg_range (BD9571MWV_DVFS_MONIVDAC ,BD9571MWV_DVFS_MONIVDAC ),regmap_reg_range (BD9571MWV_GPIO_IN ,BD9571MWV_GPIO_IN ),regmap_reg_range (BD9571MWV_GPIO_INT ,BD9571MWV_GPIO_INT ),regmap_reg_range (BD9571MWV_INT_INTREQ ,BD9571MWV_INT_INTREQ ),
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 30/183 mfd: at91-usart: Add platform dependency
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 628f3dfe4c7b35bbe63ec194ca6da857b00b0083 ]
It doesn't make sense to present option MFD_AT91_USART by default if not building an AT91 kernel, as the drivers which depend on it are not available.
--- drivers/mfd/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/mfd/Kconfig +1 -0
@@ -102,6 +102,7 @@ config MFD_AAT2870_CORE config MFD_AT91_USART tristate "AT91 USART Driver" select MFD_CORE + depends on ARCH_AT91 || COMPILE_TEST help Select this to get support for AT91 USART IP. This is a wrapper over at91-usart-serial driver and usart-spi-driver. Only one function
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 31/183 mfd: qcom_rpm: write fw_version to CTRL_REG
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 504e4175829c44328773b96ad9c538e4783a8d22 ]
This is required as part of the initialization sequence on certain SoCs.
If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device).
--- drivers/mfd/qcom_rpm.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/mfd/qcom_rpm.c +4 -0
@@ -638,6 +638,10 @@ static int qcom_rpm_probe(struct platform_device *pdev)return -EFAULT ; } +writel (fw_version[0 ],RPM_CTRL_REG (rpm,0 )); +writel (fw_version[1 ],RPM_CTRL_REG (rpm,1 )); +writel (fw_version[2 ],RPM_CTRL_REG (rpm,2 )); +dev_info (&pdev->dev,"RPM firmware %u.%u.%u\n" , fw_version[0 ], fw_version[1 ], fw_version[2 ]);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 32/183 mfd: wm5110: Add missing ASRC rate register
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 04c801c18ded421845324255e660147a6f58dcd6 ]
--- drivers/mfd/wm5110-tables.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/mfd/wm5110-tables.c +2 -0
@@ -1618,6 +1618,7 @@ static const struct reg_default wm5110_reg_default[] = { { 0x00000ECD, 0x0000 }, /* R3789 - HPLPF4_2 */ { 0x00000EE0, 0x0000 }, /* R3808 - ASRC_ENABLE */ { 0x00000EE2, 0x0000 }, /* R3810 - ASRC_RATE1 */ + { 0x00000EE3, 0x4000 }, /* R3811 - ASRC_RATE2 */ { 0x00000EF0, 0x0000 }, /* R3824 - ISRC 1 CTRL 1 */ { 0x00000EF1, 0x0000 }, /* R3825 - ISRC 1 CTRL 2 */ { 0x00000EF2, 0x0000 }, /* R3826 - ISRC 1 CTRL 3 */
@@ -2869,6 +2870,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)case ARIZONA_ASRC_ENABLE :case ARIZONA_ASRC_STATUS :case ARIZONA_ASRC_RATE1 : +case ARIZONA_ASRC_RATE2 :case ARIZONA_ISRC_1_CTRL_1 :case ARIZONA_ISRC_1_CTRL_2 :case ARIZONA_ISRC_1_CTRL_3 :
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 33/183 mfd: axp20x: Add AC power supply cell for AXP813
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4a19f9a65375ca9781b3ca9e810ece92edfc3e78 ]
As axp20x-ac-power-supply now supports AXP813, add a cell for it.
--- drivers/mfd/axp20x.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/mfd/axp20x.c +5 -0
@@ -778,6 +778,11 @@ static const struct mfd_cell axp813_cells[] = { }, { .name = "axp20x-battery-power-supply", .of_compatible = "x-powers,axp813-battery-power-supply", + }, { + .name = "axp20x-ac-power-supply", + .of_compatible = "x-powers,axp813-ac-power-supply", + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), + .resources = axp20x_ac_power_supply_resources, }, };
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 34/183 mfd: axp20x: Re-align MFD cell entries
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 753a8d083e085c6f552c7982749de4cc7c40e2ac ]
In the axp20x driver, the various mfd_cell lists had varying amounts of indentation, sometimes even within the same list. For the axp288, there's no alignment at all.
Re-align the right hand side of the assignments with the least amount of tabs possible. Also collapse the closing bracket and the opening bracket of the next entry onto the same line for the axp288, to be consistent with all the other mfd_cell lists.
This patch is whitespace change only. No functionality is modified.
--- drivers/mfd/axp20x.c | 107 +++++++++++++++++++++---------------------- 1 file changed, 51 insertions(+), 56 deletions(-)
drivers/mfd/axp20x.c +51 -56
@@ -640,9 +640,9 @@ static const struct mfd_cell axp221_cells[] = {static const struct mfd_cell axp223_cells[] = { { - .name ="axp221-pek" , - .num_resources =ARRAY_SIZE (axp22x_pek_resources), - .resources = axp22x_pek_resources, + .name ="axp221-pek" , + .num_resources =ARRAY_SIZE (axp22x_pek_resources), + .resources = axp22x_pek_resources, }, { .name ="axp22x-adc" , .of_compatible ="x-powers,axp221-adc" ,
@@ -650,7 +650,7 @@ static const struct mfd_cell axp223_cells[] = { .name = "axp20x-battery-power-supply", .of_compatible = "x-powers,axp221-battery-power-supply", }, { - .name = "axp20x-regulator", + .name = "axp20x-regulator", }, { .name = "axp20x-ac-power-supply", .of_compatible = "x-powers,axp221-ac-power-supply",
@@ -666,9 +666,9 @@ static const struct mfd_cell axp223_cells[] = {static const struct mfd_cell axp152_cells[] = { { - .name ="axp20x-pek" , - .num_resources =ARRAY_SIZE (axp152_pek_resources), - .resources = axp152_pek_resources, + .name ="axp20x-pek" , + .num_resources =ARRAY_SIZE (axp152_pek_resources), + .resources = axp152_pek_resources, }, };
@@ -697,84 +697,79 @@ static const struct resource axp288_charger_resources[] = {static const struct mfd_cell axp288_cells[] = { { - .name ="axp288_adc" , - .num_resources =ARRAY_SIZE (axp288_adc_resources), - .resources = axp288_adc_resources, - }, - { - .name ="axp288_extcon" , - .num_resources =ARRAY_SIZE (axp288_extcon_resources), - .resources = axp288_extcon_resources, - }, - { - .name ="axp288_charger" , - .num_resources =ARRAY_SIZE (axp288_charger_resources), - .resources = axp288_charger_resources, - }, - { - .name ="axp288_fuel_gauge" , - .num_resources =ARRAY_SIZE (axp288_fuel_gauge_resources), - .resources = axp288_fuel_gauge_resources, - }, - { - .name ="axp221-pek" , - .num_resources =ARRAY_SIZE (axp288_power_button_resources), - .resources = axp288_power_button_resources, - }, - { - .name ="axp288_pmic_acpi" , + .name ="axp288_adc" , + .num_resources =ARRAY_SIZE (axp288_adc_resources), + .resources = axp288_adc_resources, + }, { + .name ="axp288_extcon" , + .num_resources =ARRAY_SIZE (axp288_extcon_resources), + .resources = axp288_extcon_resources, + }, { + .name ="axp288_charger" , + .num_resources =ARRAY_SIZE (axp288_charger_resources), + .resources = axp288_charger_resources, + }, { + .name ="axp288_fuel_gauge" , + .num_resources =ARRAY_SIZE (axp288_fuel_gauge_resources), + .resources = axp288_fuel_gauge_resources, + }, { + .name ="axp221-pek" , + .num_resources =ARRAY_SIZE (axp288_power_button_resources), + .resources = axp288_power_button_resources, + }, { + .name ="axp288_pmic_acpi" , }, };static const struct mfd_cell axp803_cells[] = { { - .name ="axp221-pek" , - .num_resources =ARRAY_SIZE (axp803_pek_resources), - .resources = axp803_pek_resources, + .name ="axp221-pek" , + .num_resources =ARRAY_SIZE (axp803_pek_resources), + .resources = axp803_pek_resources, }, - { .name ="axp20x-regulator" }, + { .name ="axp20x-regulator" }, };static const struct mfd_cell axp806_self_working_cells[] = { { - .name ="axp221-pek" , - .num_resources =ARRAY_SIZE (axp806_pek_resources), - .resources = axp806_pek_resources, + .name ="axp221-pek" , + .num_resources =ARRAY_SIZE (axp806_pek_resources), + .resources = axp806_pek_resources, }, - { .name ="axp20x-regulator" }, + { .name ="axp20x-regulator" }, };static const struct mfd_cell axp806_cells[] = { { - .id =2 , - .name ="axp20x-regulator" , + .id =2 , + .name ="axp20x-regulator" , }, };static const struct mfd_cell axp809_cells[] = { { - .name ="axp221-pek" , - .num_resources =ARRAY_SIZE (axp809_pek_resources), - .resources = axp809_pek_resources, + .name ="axp221-pek" , + .num_resources =ARRAY_SIZE (axp809_pek_resources), + .resources = axp809_pek_resources, }, { - .id =1 , - .name ="axp20x-regulator" , + .id =1 , + .name ="axp20x-regulator" , }, };static const struct mfd_cell axp813_cells[] = { { - .name ="axp221-pek" , - .num_resources =ARRAY_SIZE (axp803_pek_resources), - .resources = axp803_pek_resources, + .name ="axp221-pek" , + .num_resources =ARRAY_SIZE (axp803_pek_resources), + .resources = axp803_pek_resources, }, { - .name ="axp20x-regulator" , + .name ="axp20x-regulator" , }, { - .name ="axp20x-gpio" , - .of_compatible ="x-powers,axp813-gpio" , + .name ="axp20x-gpio" , + .of_compatible ="x-powers,axp813-gpio" , }, { - .name ="axp813-adc" , - .of_compatible ="x-powers,axp813-adc" , + .name ="axp813-adc" , + .of_compatible ="x-powers,axp813-adc" , }, { .name ="axp20x-battery-power-supply" , .of_compatible ="x-powers,axp813-battery-power-supply" ,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 35/183 mfd: axp20x: Add supported cells for AXP803
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ea90e7b47f0a8bd2fe14e9a88f523de7c67db90a ]
Parts of the AXP803 are compatible with their counterparts on the AXP813. These include the GPIO, ADC, AC and battery power supplies.
--- drivers/mfd/axp20x.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/mfd/axp20x.c +14 -0
@@ -726,6 +726,20 @@ static const struct mfd_cell axp803_cells[] = { .name = "axp221-pek", .num_resources = ARRAY_SIZE(axp803_pek_resources), .resources = axp803_pek_resources, + }, { + .name = "axp20x-gpio", + .of_compatible = "x-powers,axp813-gpio", + }, { + .name = "axp813-adc", + .of_compatible = "x-powers,axp813-adc", + }, { + .name = "axp20x-battery-power-supply", + .of_compatible = "x-powers,axp813-battery-power-supply", + }, { + .name = "axp20x-ac-power-supply", + .of_compatible = "x-powers,axp813-ac-power-supply", + .num_resources = ARRAY_SIZE(axp20x_ac_power_supply_resources), + .resources = axp20x_ac_power_supply_resources, }, { .name = "axp20x-regulator" }, };
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 36/183 mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 18e294ddafaeb80a1e2e10c9bd750a6cb8388d5b ]
The driver adds different MFD child devices via mfd_add_devices() and hence it is required to call mfd_remove_devices() to remove MFD child devices.
--- drivers/mfd/cros_ec_dev.c | 1 + 1 file changed, 1 insertion(+)
drivers/mfd/cros_ec_dev.c +1 -0
@@ -499,6 +499,7 @@ static int ec_device_remove(struct platform_device *pdev)cros_ec_debugfs_remove (ec); +mfd_remove_devices (ec->dev);cdev_del (&ec->cdev);device_unregister (&ec->class_dev);return 0 ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 37/183 mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 75d4c5e03c2ae9902ab521024b10291f6fc9515b ]
Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function.
--- drivers/mfd/tps65218.c | 24 +++--------------------- 1 file changed, 3 insertions(+), 21 deletions(-)
drivers/mfd/tps65218.c +3 -21
@@ -235,9 +235,9 @@ static int tps65218_probe(struct i2c_client *client,mutex_init (&tps->tps_lock); - ret =regmap_add_irq_chip (tps->regmap, tps->irq, -IRQF_ONESHOT ,0 , &tps65218_irq_chip, - &tps->irq_data); + ret =devm_regmap_add_irq_chip (&client->dev, tps->regmap, tps->irq, +IRQF_ONESHOT ,0 , &tps65218_irq_chip, + &tps->irq_data);if (ret <0 )return ret;
@@ -253,26 +253,9 @@ static int tps65218_probe(struct i2c_client *client,ARRAY_SIZE (tps65218_cells),NULL ,0 , regmap_irq_get_domain(tps->irq_data)); -if (ret <0 ) - goto err_irq; - -return 0 ; - -err_irq: -regmap_del_irq_chip (tps->irq, tps->irq_data); -return ret; } -static int tps65218_remove (struct i2c_client *client) -{ -struct tps65218 *tps =i2c_get_clientdata (client); - -regmap_del_irq_chip (tps->irq, tps->irq_data); - -return 0 ; -} -static const struct i2c_device_id tps65218_id_table[] = { {"tps65218" ,TPS65218 }, { },
@@ -285,7 +268,6 @@ static struct i2c_driver tps65218_driver = { .of_match_table = of_tps65218_match_table, }, .probe = tps65218_probe, - .remove = tps65218_remove, .id_table = tps65218_id_table, };
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 38/183 mfd: mc13xxx: Fix a missing check of a register-read failure
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9e28989d41c0eab57ec0bb156617a8757406ff8a ]
When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails.
The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails.
--- drivers/mfd/mc13xxx-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/mfd/mc13xxx-core.c +3 -1
@@ -274,7 +274,9 @@ int mc13xxx_adc_do_conversion(struct mc13xxx *mc13xxx, unsigned int mode, mc13xxx->adcflags |=MC13XXX_ADC_WORKING ; -mc13xxx_reg_read (mc13xxx,MC13XXX_ADC0 , &old_adc0); + ret =mc13xxx_reg_read (mc13xxx,MC13XXX_ADC0 , &old_adc0); +if (ret) + goto out; adc0 =MC13XXX_ADC0_ADINC1 |MC13XXX_ADC0_ADINC2 |MC13XXX_ADC0_CHRGRAWDIV ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 39/183 xen/pvcalls: remove set but not used variable intf
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1f8ce09b36c41a026a37a24b20efa32000892a64 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/xen/pvcalls-back.c: In function 'pvcalls_sk_state_change':drivers/xen/pvcalls-back.c:286:28: warning:
variable 'intf' set but not used [-Wunused-but-set-variable]
It not used since e6587cdbd732 ("pvcalls-back: set -ENOTCONN in pvcalls_conn_back_read")
--- drivers/xen/pvcalls-back.c | 2 -- 1 file changed, 2 deletions(-)
drivers/xen/pvcalls-back.c +0 -2
@@ -283,12 +283,10 @@ static int pvcalls_back_socket(struct xenbus_device *dev,static void pvcalls_sk_state_change (struct sock *sock) {struct sock_mapping *map = sock->sk_user_data; -struct pvcalls_data_intf *intf;if (map ==NULL )return ; - intf = map->ring;atomic_inc (&map->read);notify_remote_via_irq (map->irq); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 40/183 soc/fsl/qe: fix err handling of ucc_of_parse_tdm
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8d68100ab4ad92560a16a68b72e068613ac4d573 ]
Currently there are some issues with the ucc_of_parse_tdm function:
1, a possible null pointer dereference in ucc_of_parse_tdm, detected by the semantic patch deref_null.cocci,
with the following warning:
drivers/soc/fsl/qe/qe_tdm.c:177:21-24: ERROR: pdev is NULL but dereferenced. 2, dev gets modified, so in any case that devm_iounmap() will fail even when the new pdev is valid, because the iomap was done with a
different pdev.
3, there is no driver bind with the "fsl,t1040-qe-si" or "fsl,t1040-qe-siram" device. So allocating resources using devm_*() with these devices won't provide a cleanup path for these resources when the caller fails.
This patch fixes them.
--- drivers/net/wan/fsl_ucc_hdlc.c | 62 +++++++++++++++++++++++++++++++++- drivers/soc/fsl/qe/qe_tdm.c | 55 ------------------------------ 2 files changed, 61 insertions(+), 56 deletions(-)
drivers/net/wan/fsl_ucc_hdlc.c +61 -1
@@ -1049,6 +1049,54 @@ static const struct net_device_ops uhdlc_ops = { .ndo_tx_timeout = uhdlc_tx_timeout, }; +static int hdlc_map_iomem (char *name,int init_flag,void __iomem **ptr) +{ +struct device_node *np; +struct platform_device *pdev; +struct resource *res; +static int siram_init_flag; +int ret =0 ; + + np =of_find_compatible_node (NULL ,NULL , name); +if (!np) +return -EINVAL ; + + pdev =of_find_device_by_node (np); +if (!pdev) { +pr_err ("%pOFn: failed to lookup pdev\n" , np); +of_node_put (np); +return -EINVAL ; + } + +of_node_put (np); + res =platform_get_resource (pdev,IORESOURCE_MEM ,0 ); +if (!res) { + ret = -EINVAL ; + goto error_put_device; + } + *ptr =ioremap (res->start,resource_size (res)); +if (!*ptr) { + ret = -ENOMEM ; + goto error_put_device; + } + +/* We've remapped the addresses, and we don't need the device any +* more, so we should release it. +*/ +put_device (&pdev->dev); + +if (init_flag && siram_init_flag ==0 ) { +memset_io (*ptr,0 ,resource_size (res)); + siram_init_flag =1 ; + } +return 0 ; + +error_put_device: +put_device (&pdev->dev); + +return ret; +} +static int ucc_hdlc_probe (struct platform_device *pdev) {struct device_node *np = pdev->dev.of_node;
@@ -1143,6 +1191,15 @@ static int ucc_hdlc_probe(struct platform_device *pdev) ret =ucc_of_parse_tdm (np, utdm, ut_info);if (ret) goto free_utdm; + + ret =hdlc_map_iomem ("fsl,t1040-qe-si" ,0 , + (void __iomem **)&utdm->si_regs); +if (ret) + goto free_utdm; + ret =hdlc_map_iomem ("fsl,t1040-qe-siram" ,1 , + (void __iomem **)&utdm->siram); +if (ret) + goto unmap_si_regs; }if (of_property_read_u16 (np,"fsl,hmask" , &uhdlc_priv->hmask))
@@ -1151,7 +1208,7 @@ static int ucc_hdlc_probe(struct platform_device *pdev) ret =uhdlc_init (uhdlc_priv);if (ret) {dev_err (&pdev->dev,"Failed to init uhdlc\n" ); - goto free_utdm; + goto undo_uhdlc_init; } dev =alloc_hdlcdev (uhdlc_priv);
@@ -1181,6 +1238,9 @@ static int ucc_hdlc_probe(struct platform_device *pdev) free_dev:free_netdev (dev); undo_uhdlc_init: +iounmap (utdm->siram); +unmap_si_regs: +iounmap (utdm->si_regs); free_utdm:if (uhdlc_priv->tsa)kfree (utdm);
drivers/soc/fsl/qe/qe_tdm.c +0 -55
67 lines not on this page · raw message
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 41/183 qed: Fix qed_chain_set_prod() for PBL chains with non power of 2 page count
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2d533a9287f2011632977e87ce2783f4c689c984 ]
In PBL chains with non power of 2 page count, the producer is not at the beginning of the chain when index is 0 after a wrap. Therefore, after the producer index wrap around, page index should be calculated more carefully.
--- include/linux/qed/qed_chain.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
include/linux/qed/qed_chain.h +31 -0
@@ -663,6 +663,37 @@ static inline void *qed_chain_get_last_elem(struct qed_chain *p_chain)static inline void qed_chain_set_prod (struct qed_chain *p_chain,u32 prod_idx,void *p_prod_elem) { +if (p_chain->mode ==QED_CHAIN_MODE_PBL ) { +u32 cur_prod, page_mask, page_cnt, page_diff; + + cur_prod =is_chain_u16 (p_chain) ? p_chain->u.chain16.prod_idx : + p_chain->u.chain32.prod_idx; + +/* Assume that number of elements in a page is power of 2 */ + page_mask = ~p_chain->elem_per_page_mask; + +/* Use "cur_prod - 1" and "prod_idx - 1" since producer index +* reaches the first element of next page before the page index +* is incremented. See qed_chain_produce(). +* Index wrap around is not a problem because the difference +* between current and given producer indices is always +* positive and lower than the chain's capacity. +*/ + page_diff = (((cur_prod -1 ) & page_mask) - + ((prod_idx -1 ) & page_mask)) / + p_chain->elem_per_page; + + page_cnt =qed_chain_get_page_cnt (p_chain); +if (is_chain_u16 (p_chain)) + p_chain->pbl.c.u16.prod_page_idx = + (p_chain->pbl.c.u16.prod_page_idx - + page_diff + page_cnt) % page_cnt; +else + p_chain->pbl.c.u32.prod_page_idx = + (p_chain->pbl.c.u32.prod_page_idx - + page_diff + page_cnt) % page_cnt; + } +if (is_chain_u16 (p_chain)) p_chain->u.chain16.prod_idx = (u16 ) prod_idx;else
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 42/183 qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrier
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 46721c3d9e273aea880e9ff835b0e1271e1cd2fb ]
Make sure chain element is updated before ringing the doorbell.
--- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/ethernet/qlogic/qed/qed_ll2.c +4 -0
@@ -1603,6 +1603,10 @@ static void qed_ll2_post_rx_buffer_notify_fw(struct qed_hwfn *p_hwfn, cq_prod =qed_chain_get_prod_idx (&p_rx->rcq_chain); rx_prod.bd_prod =cpu_to_le16 (bd_prod); rx_prod.cqe_prod =cpu_to_le16 (cq_prod); + +/* Make sure chain element is updated before ringing the doorbell */ +dma_wmb (); +DIRECT_REG_WR (p_rx->set_prod_addr, *((u32 *)&rx_prod)); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 43/183 net: hns: Fix use after free identified by SLUB debug
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bb989501abcafa0de5f18b0ec0ec459b5b817908 ]
When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug:
[134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290
struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic.
This patch frees vf_cb after hnae_handle used.
--- drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/net/ethernet/hisilicon/hns/hns_ae_adapt.c +2 -4
@@ -147,12 +147,10 @@ static void hns_ae_put_handle(struct hnae_handle *handle)struct hnae_vf_cb *vf_cb =hns_ae_get_vf_cb (handle);int i; - vf_cb->mac_cb =NULL ; - -kfree (vf_cb); -for (i =0 ; i < handle->q_num; i++)hns_ae_get_ring_pair (handle->qs[i])->used_by_vf =0 ; + +kfree (vf_cb); }static int hns_ae_wait_flow_down (struct hnae_handle *handle)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 44/183 selftests: net: fix/improve ip_defrag selftest
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3271a4821882a64214acc1bd7b173900ec70c9bf ]
Commit ade446403bfb ("net: ipv4: do not handle duplicate fragments as overlapping") changed IPv4 defragmentation so that duplicate fragments, as well as _some_ fragments completely covered by previously delivered fragments, do not lead to the whole frag queue being discarded. This makes the existing ip_defrag selftest flaky.
This patch
* makes sure that negative IPv4 defrag tests generate truly overlapping fragments that trigger defrag queue drops;
* tests that duplicate IPv4 fragments do not trigger defrag queue drops;
* makes a couple of minor tweaks to the test aimed at increasing its code coverage and reduce flakiness.
--- tools/testing/selftests/net/ip_defrag.c | 96 +++++++++++++++++++++--- tools/testing/selftests/net/ip_defrag.sh | 9 ++- 2 files changed, 95 insertions(+), 10 deletions(-)
tools/testing/selftests/net/ip_defrag.c +87 -9
@@ -203,6 +203,7 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, {struct ip *iphdr = (struct ip *)ip_frame;struct ip6_hdr *ip6hdr = (struct ip6_hdr *)ip_frame; +const bool ipv4 = !ipv6;int res;int offset;int frag_len;
@@ -239,19 +240,53 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, iphdr->ip_sum =0 ; } +/* Occasionally test in-order fragments. */ +if (!cfg_overlap && (rand () %100 <15 )) { + offset =0 ; +while (offset < (UDP_HLEN + payload_len)) { +send_fragment (fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } +return ; + } + +/* Occasionally test IPv4 "runs" (see net/ipv4/ip_fragment.c) */ +if (ipv4 && !cfg_overlap && (rand () %100 <20 ) && + (payload_len >9 * max_frag_len)) { + offset =6 * max_frag_len; +while (offset < (UDP_HLEN + payload_len)) { +send_fragment (fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } + offset =3 * max_frag_len; +while (offset <6 * max_frag_len) { +send_fragment (fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } + offset =0 ; +while (offset <3 * max_frag_len) { +send_fragment (fd_raw, addr, alen, offset, ipv6); + offset += max_frag_len; + } +return ; + } +/* Odd fragments. */ offset = max_frag_len;while (offset < (UDP_HLEN + payload_len)) {send_fragment (fd_raw, addr, alen, offset, ipv6); +/* IPv4 ignores duplicates, so randomly send a duplicate. */ +if (ipv4 && (1 ==rand () %100 )) +send_fragment (fd_raw, addr, alen, offset, ipv6); offset +=2 * max_frag_len; }if (cfg_overlap) {/* Send an extra random fragment. */ - offset =rand () % (UDP_HLEN + payload_len -1 ); -/* sendto() returns EINVAL if offset + frag_len is too small. */ if (ipv6) {struct ip6_frag *fraghdr = (struct ip6_frag *)(ip_frame +IP6_HLEN ); +/* sendto() returns EINVAL if offset + frag_len is too small. */ + offset =rand () % (UDP_HLEN + payload_len -1 ); frag_len = max_frag_len +rand () %256 ;/* In IPv6 if !!(frag_len % 8), the fragment is dropped. */ frag_len &= ~0x7 ;
@@ -259,13 +294,29 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, ip6hdr->ip6_plen =htons (frag_len); frag_len +=IP6_HLEN ; }else { - frag_len =IP4_HLEN +UDP_HLEN +rand () %256 ; +/* In IPv4, duplicates and some fragments completely inside +* previously sent fragments are dropped/ignored. So +* random offset and frag_len can result in a dropped +* fragment instead of a dropped queue/packet. So we +* hard-code offset and frag_len. +* +* See ade446403bfb ("net: ipv4: do not handle duplicate +* fragments as overlapping"). +*/ +if (max_frag_len *4 < payload_len || max_frag_len <16 ) { +/* not enough payload to play with random offset and frag_len. */ + offset =8 ; + frag_len =IP4_HLEN +UDP_HLEN + max_frag_len; + }else { + offset =rand () % (payload_len /2 ); + frag_len =2 * max_frag_len +1 +rand () %256 ; + } iphdr->ip_off =htons (offset /8 |IP4_MF ); iphdr->ip_len =htons (frag_len); } res =sendto (fd_raw, ip_frame, frag_len,0 , addr, alen);if (res <0 ) -error (1 , errno,"sendto overlap" ); +error (1 , errno,"sendto overlap: %d" , frag_len);if (res != frag_len)error (1 ,0 ,"sendto overlap: %d vs %d" , (int )res, frag_len); frag_counter++;
@@ -275,6 +326,9 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr, offset =0 ;while (offset < (UDP_HLEN + payload_len)) {send_fragment (fd_raw, addr, alen, offset, ipv6); +/* IPv4 ignores duplicates, so randomly send a duplicate. */ +if (ipv4 && (1 ==rand () %100 )) +send_fragment (fd_raw, addr, alen, offset, ipv6); offset +=2 * max_frag_len; } }
@@ -282,7 +336,11 @@ static void send_udp_frags(int fd_raw, struct sockaddr *addr,static void run_test (struct sockaddr *addr,socklen_t alen,bool ipv6) {int fd_tx_raw, fd_rx_udp; -struct timeval tv = { .tv_sec =0 , .tv_usec =10 *1000 }; +/* Frag queue timeout is set to one second in the calling script; +* socket timeout should be just a bit longer to avoid tests interfering +* with each other. +*/ +struct timeval tv = { .tv_sec =1 , .tv_usec =10 };int idx;int min_frag_len = ipv6 ?1280 :8 ;
@@ -308,12 +366,32 @@ static void run_test(struct sockaddr *addr, socklen_t alen, bool ipv6) payload_len += (rand() % 4096)) {if (cfg_verbose)printf ("payload_len: %d\n" , payload_len); - max_frag_len = min_frag_len; -do { + +if (cfg_overlap) { +/* With overlaps, one send/receive pair below takes +* at least one second (== timeout) to run, so there +* is not enough test time to run a nested loop: +* the full overlap test takes 20-30 seconds. +*/ + max_frag_len = min_frag_len + +rand () % (1500 -FRAG_HLEN - min_frag_len);send_udp_frags (fd_tx_raw, addr, alen, ipv6);recv_validate_udp (fd_rx_udp); - max_frag_len +=8 * (rand () %8 ); - }while (max_frag_len < (1500 -FRAG_HLEN ) && max_frag_len <= payload_len); + }else { +/* Without overlaps, each packet reassembly (== one +* send/receive pair below) takes very little time to +* run, so we can easily afford more thourough testing +* with a nested loop: the full non-overlap test takes +* less than one second). +*/ + max_frag_len = min_frag_len; +do { +send_udp_frags (fd_tx_raw, addr, alen, ipv6); +recv_validate_udp (fd_rx_udp); + max_frag_len +=8 * (rand () %8 ); + }while (max_frag_len < (1500 -FRAG_HLEN ) && + max_frag_len <= payload_len); + } }/* Cleanup. */
tools/testing/selftests/net/ip_defrag.sh +8 -1
@@ -11,10 +11,17 @@ readonly NETNS="ns-$(mktemp -u XXXXXX)" setup() { ip netns add "${NETNS}" ip -netns "${NETNS}" link set lo up + ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_high_thresh=9000000 >/dev/null 2>&1 ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_low_thresh=7000000 >/dev/null 2>&1 + ip netns exec "${NETNS}" sysctl -w net.ipv4.ipfrag_time=1 >/dev/null 2>&1 + ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_high_thresh=9000000 >/dev/null 2>&1 ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_low_thresh=7000000 >/dev/null 2>&1 + ip netns exec "${NETNS}" sysctl -w net.ipv6.ip6frag_time=1 >/dev/null 2>&1 + + # DST cache can get full with a lot of frags, with GC not keeping up with the test. + ip netns exec "${NETNS}" sysctl -w net.ipv6.route.max_size=65536 >/dev/null 2>&1 } cleanup() {
@@ -27,7 +34,6 @@ setup echo "ipv4 defrag" ip netns exec "${NETNS}" ./ip_defrag -4 - echo "ipv4 defrag with overlaps" ip netns exec "${NETNS}" ./ip_defrag -4o
@@ -37,3 +43,4 @@ ip netns exec "${NETNS}" ./ip_defrag -6 echo "ipv6 defrag with overlaps" ip netns exec "${NETNS}" ./ip_defrag -6o +echo "all tests done"
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 45/183 bpf: Fix [::] -> [::1] rewrite in sys_sendmsg
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e8e36984080b55ac5e57bdb09a5b570f2fc8e963 ]
sys_sendmsg has supported unspecified destination IPv6 (wildcard) for unconnected UDP sockets since 876c7f41. When [::] is passed by user as destination, sys_sendmsg rewrites it with [::1] to be consistent with BSD (see "BSD'ism" comment in the code).
This didn't work when cgroup-bpf was enabled though since the rewrite [::] -> [::1] happened before passing control to cgroup-bpf block where fl6.daddr was updated with passed by user sockaddr_in6.sin6_addr (that might or might not be changed by BPF program). That way if user passed [::] as dst IPv6 it was first rewritten with [::1] by original code from 876c7f41, but then rewritten back with [::] by cgroup-bpf block.
It happened even when BPF_CGROUP_UDP6_SENDMSG program was not present (CONFIG_CGROUP_BPF=y was enough).
The fix is to apply BSD'ism after cgroup-bpf block so that [::] is replaced with [::1] no matter where it came from: passed by user to sys_sendmsg or set by BPF_CGROUP_UDP6_SENDMSG program.
--- net/ipv6/udp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
net/ipv6/udp.c +4 -4
@@ -1322,10 +1322,7 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) ipc6.opt = opt; fl6.flowi6_proto = sk->sk_protocol; -if (!ipv6_addr_any (daddr)) - fl6.daddr = *daddr; -else - fl6.daddr.s6_addr[15 ] =0x1 ;/* :: means loopback (BSD'ism) */ + fl6.daddr = *daddr;if (ipv6_addr_any (&fl6.saddr) && !ipv6_addr_any (&np->saddr)) fl6.saddr = np->saddr; fl6.fl6_sport = inet->inet_sport;
@@ -1353,6 +1350,9 @@ int udpv6_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) } } +if (ipv6_addr_any (&fl6.daddr)) + fl6.daddr.s6_addr[15 ] =0x1 ;/* :: means loopback (BSD'ism) */ + final_p =fl6_update_dst (&fl6, opt, &final);if (final_p) connected = false;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 46/183 selftests/bpf: Test [::] -> [::1] rewrite in sys_sendmsg in test_sock_addr
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 976b4f3a4646fbf0d189caca25f91f82e4be4b5a ]
Test that sys_sendmsg BPF hook doesn't break sys_sendmsg behaviour to rewrite destination IPv6 = [::] with [::1] (BSD'ism).
Two test cases are added:
1) User passes dst IPv6 = [::] and BPF_CGROUP_UDP6_SENDMSG program doesn't touch it.
2) User passes dst IPv6 != [::], but BPF_CGROUP_UDP6_SENDMSG program rewrites it with [::].
In both cases [::1] is used by sys_sendmsg code eventually and datagram is sent successfully for unconnected UDP socket.
Example of relevant output:
Test case: sendmsg6: set dst IP = [::] (BSD'ism) .. [PASS] Test case: sendmsg6: preserve dst IP = [::] (BSD'ism) .. [PASS]
--- tools/testing/selftests/bpf/test_sock_addr.c | 53 ++++++++++++++++++-- 1 file changed, 50 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/test_sock_addr.c +50 -3
@@ -44,6 +44,7 @@#define SERV6_V4MAPPED_IP "::ffff:192.168.0.4"#define SRC6_IP "::1"#define SRC6_REWRITE_IP "::6" +#define WILDCARD6_IP "::"#define SERV6_PORT 6060#define SERV6_REWRITE_PORT 6666
@@ -85,12 +86,14 @@ static int bind4_prog_load(const struct sock_addr_test *test);static int bind6_prog_load (const struct sock_addr_test *test);static int connect4_prog_load (const struct sock_addr_test *test);static int connect6_prog_load (const struct sock_addr_test *test); +static int sendmsg_allow_prog_load (const struct sock_addr_test *test);static int sendmsg_deny_prog_load (const struct sock_addr_test *test);static int sendmsg4_rw_asm_prog_load (const struct sock_addr_test *test);static int sendmsg4_rw_c_prog_load (const struct sock_addr_test *test);static int sendmsg6_rw_asm_prog_load (const struct sock_addr_test *test);static int sendmsg6_rw_c_prog_load (const struct sock_addr_test *test);static int sendmsg6_rw_v4mapped_prog_load (const struct sock_addr_test *test); +static int sendmsg6_rw_wildcard_prog_load (const struct sock_addr_test *test);static struct sock_addr_test tests[] = {/* bind */
@@ -462,6 +465,34 @@ static struct sock_addr_test tests[] = {SRC6_REWRITE_IP ,SYSCALL_ENOTSUPP , }, + { +"sendmsg6: set dst IP = [::] (BSD'ism)" , + sendmsg6_rw_wildcard_prog_load, +BPF_CGROUP_UDP6_SENDMSG , +BPF_CGROUP_UDP6_SENDMSG , +AF_INET6 , +SOCK_DGRAM , +SERV6_IP , +SERV6_PORT , +SERV6_REWRITE_IP , +SERV6_REWRITE_PORT , +SRC6_REWRITE_IP , +SUCCESS , + }, + { +"sendmsg6: preserve dst IP = [::] (BSD'ism)" , + sendmsg_allow_prog_load, +BPF_CGROUP_UDP6_SENDMSG , +BPF_CGROUP_UDP6_SENDMSG , +AF_INET6 , +SOCK_DGRAM , +WILDCARD6_IP , +SERV6_PORT , +SERV6_REWRITE_IP , +SERV6_PORT , +SRC6_IP , +SUCCESS , + }, {"sendmsg6: deny call" , sendmsg_deny_prog_load,
@@ -714,16 +745,27 @@ static int connect6_prog_load(const struct sock_addr_test *test)return load_path (test,CONNECT6_PROG_PATH ); } -static int sendmsg_deny_prog_load (const struct sock_addr_test *test) +static int sendmsg_ret_only_prog_load (const struct sock_addr_test *test, +int32_t rc) {struct bpf_insn insns[] = { -/* return 0 */ -BPF_MOV64_IMM (BPF_REG_0 ,0 ), +/* return rc */ +BPF_MOV64_IMM (BPF_REG_0 , rc),BPF_EXIT_INSN (), };return load_insns (test, insns,sizeof (insns) /sizeof (struct bpf_insn )); } +static int sendmsg_allow_prog_load (const struct sock_addr_test *test) +{ +return sendmsg_ret_only_prog_load (test,/*rc*/ 1 ); +} + +static int sendmsg_deny_prog_load (const struct sock_addr_test *test) +{ +return sendmsg_ret_only_prog_load (test,/*rc*/ 0 ); +} +static int sendmsg4_rw_asm_prog_load (const struct sock_addr_test *test) {struct sockaddr_in dst4_rw_addr;
@@ -844,6 +886,11 @@ static int sendmsg6_rw_v4mapped_prog_load(const struct sock_addr_test *test)return sendmsg6_rw_dst_asm_prog_load (test,SERV6_V4MAPPED_IP ); } +static int sendmsg6_rw_wildcard_prog_load (const struct sock_addr_test *test) +{ +return sendmsg6_rw_dst_asm_prog_load (test,WILDCARD6_IP ); +} +static int sendmsg6_rw_c_prog_load (const struct sock_addr_test *test) {return load_path (test,SENDMSG6_PROG_PATH );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 47/183 hwmon: (nct6775) Fix chip ID for NCT6798D
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 264142bc70ec039e26d8f3b46a717e8037f59ca0 ]
The chip ID is 0xd42[8-f], not 0xd45[8-f].
--- drivers/hwmon/nct6775.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/hwmon/nct6775.c +3 -3
@@ -44,8 +44,8 @@* nct6796d 14 7 7 2+6 0xd420 0xc1 0x5ca3 * nct6797d 14 7 7 2+6 0xd450 0xc1 0x5ca3 * (0xd451) -* nct6798d 14 7 7 2+6 0xd458 0xc1 0x5ca3 -* (0xd459) +* nct6798d 14 7 7 2+6 0xd428 0xc1 0x5ca3 +* (0xd429) * * #temp lists the number of monitored temperature sources (first value) plus * the number of directly connectable temperature sensors (second value).
@@ -138,7 +138,7 @@ MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");#define SIO_NCT6795_ID 0xd350#define SIO_NCT6796_ID 0xd420#define SIO_NCT6797_ID 0xd450 -#define SIO_NCT6798_ID 0xd458 +#define SIO_NCT6798_ID 0xd428#define SIO_ID_MASK 0xFFF8enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 48/183 hwmon: (nct6775) Enable IO mapping for NCT6797D and NCT6798D
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9de15c95a63f527c8f7a968cd95e6ec71fc6891d ]
Similar to other recent chips from Nuvoton, IO mapping may be disabled by default. Enable it when instantiating the driver and after resume.
--- drivers/hwmon/nct6775.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/hwmon/nct6775.c +4 -2
@@ -4508,7 +4508,8 @@ static int __maybe_unused nct6775_resume(struct device *dev)if (data->kind == nct6791 || data->kind == nct6792 || data->kind == nct6793 || data->kind == nct6795 || - data->kind == nct6796) + data->kind == nct6796 || data->kind == nct6797 || + data->kind == nct6798)nct6791_enable_io_mapping (sioreg);superio_exit (sioreg);
@@ -4644,7 +4645,8 @@ static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)if (sio_data->kind == nct6791 || sio_data->kind == nct6792 || sio_data->kind == nct6793 || sio_data->kind == nct6795 || - sio_data->kind == nct6796) + sio_data->kind == nct6796 || sio_data->kind == nct6797 || + sio_data->kind == nct6798)nct6791_enable_io_mapping (sioaddr);superio_exit (sioaddr);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 49/183 watchdog: mt7621_wdt/rt2880_wdt: Fix compilation problem
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3aa8b8bbc142eeaac89891de584535ceb7fce405 ]
These files need
#include <linux/mod_devicetable.h>
to compile correctly.
--- drivers/watchdog/mt7621_wdt.c | 1 + drivers/watchdog/rt2880_wdt.c | 1 + 2 files changed, 2 insertions(+)
drivers/watchdog/mt7621_wdt.c +1 -0
@@ -17,6 +17,7 @@#include <linux/watchdog.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> +#include <linux/mod_devicetable.h> #include <asm/mach-ralink/ralink_regs.h>
drivers/watchdog/rt2880_wdt.c +1 -0
@@ -18,6 +18,7 @@#include <linux/watchdog.h> #include <linux/moduleparam.h> #include <linux/platform_device.h> +#include <linux/mod_devicetable.h> #include <asm/mach-ralink/ralink_regs.h>
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 50/183 net/mlx4: Get rid of page operation after dma_alloc_coherent
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f65e192af35058e5c82da9e90871b472d24912bc ]
This patch solves a crash at the time of mlx4 driver unload or system shutdown. The crash occurs because dma_alloc_coherent() returns one value in mlx4_alloc_icm_coherent(), but a different value is passed to dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because when allocated, that pointer is passed to sg_set_buf() to record it, then when freed it is re-calculated by calling lowmem_page_address(sg_page()) which returns a different value. Solve this by recording the value that dma_alloc_coherent() returns, and passing this to dma_free_coherent().
This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get rid of page operation after dma_alloc_coherent").
Based-on-code-from: Christoph Hellwig <[email protected]>
--- drivers/net/ethernet/mellanox/mlx4/icm.c | 92 ++++++++++++++---------- drivers/net/ethernet/mellanox/mlx4/icm.h | 22 +++++- 2 files changed, 75 insertions(+), 39 deletions(-)
drivers/net/ethernet/mellanox/mlx4/icm.c +56 -36
@@ -57,12 +57,12 @@ static void mlx4_free_icm_pages(struct mlx4_dev *dev, struct mlx4_icm_chunk *chuint i;if (chunk->nsg >0 ) -pci_unmap_sg (dev->persist->pdev, chunk->mem, chunk->npages, +pci_unmap_sg (dev->persist->pdev, chunk->sg, chunk->npages,PCI_DMA_BIDIRECTIONAL );for (i =0 ; i < chunk->npages; ++i) -__free_pages (sg_page (&chunk->mem[i]), -get_order (chunk->mem[i].length)); +__free_pages (sg_page (&chunk->sg[i]), +get_order (chunk->sg[i].length)); }static void mlx4_free_icm_coherent (struct mlx4_dev *dev,struct mlx4_icm_chunk *chunk)
@@ -71,9 +71,9 @@ static void mlx4_free_icm_coherent(struct mlx4_dev *dev, struct mlx4_icm_chunk *for (i =0 ; i < chunk->npages; ++i)dma_free_coherent (&dev->persist->pdev->dev, - chunk->mem[i].length, -lowmem_page_address (sg_page (&chunk->mem[i])), -sg_dma_address (&chunk->mem[i])); + chunk->buf[i].size, + chunk->buf[i].addr, + chunk->buf[i].dma_addr); }void mlx4_free_icm (struct mlx4_dev *dev,struct mlx4_icm *icm,int coherent)
@@ -111,22 +111,21 @@ static int mlx4_alloc_icm_pages(struct scatterlist *mem, int order,return 0 ; } -static int mlx4_alloc_icm_coherent (struct device *dev,struct scatterlist *mem, -int order,gfp_t gfp_mask) +static int mlx4_alloc_icm_coherent (struct device *dev,struct mlx4_icm_buf *buf, +int order,gfp_t gfp_mask) { -void *buf =dma_alloc_coherent (dev,PAGE_SIZE << order, - &sg_dma_address (mem), gfp_mask); -if (!buf) + buf->addr =dma_alloc_coherent (dev,PAGE_SIZE << order, + &buf->dma_addr, gfp_mask); +if (!buf->addr)return -ENOMEM ; -if (offset_in_page (buf)) { -dma_free_coherent (dev,PAGE_SIZE << order, - buf,sg_dma_address (mem)); +if (offset_in_page (buf->addr)) { +dma_free_coherent (dev,PAGE_SIZE << order, buf->addr, + buf->dma_addr);return -ENOMEM ; } -sg_set_buf (mem, buf,PAGE_SIZE << order); -sg_dma_len (mem) =PAGE_SIZE << order; + buf->size =PAGE_SIZE << order;return 0 ; }
@@ -159,21 +158,21 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,while (npages >0 ) {if (!chunk) { - chunk =kmalloc_node (sizeof (*chunk), + chunk =kzalloc_node (sizeof (*chunk), gfp_mask & ~(__GFP_HIGHMEM | __GFP_NOWARN), dev->numa_node);if (!chunk) { - chunk =kmalloc (sizeof (*chunk), + chunk =kzalloc (sizeof (*chunk), gfp_mask & ~(__GFP_HIGHMEM | __GFP_NOWARN));if (!chunk) goto fail; } + chunk->coherent = coherent; -sg_init_table (chunk->mem,MLX4_ICM_CHUNK_LEN ); - chunk->npages =0 ; - chunk->nsg =0 ; +if (!coherent) +sg_init_table (chunk->sg,MLX4_ICM_CHUNK_LEN );list_add_tail (&chunk->list, &icm->chunk_list); }
@@ -186,10 +185,10 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,if (coherent) ret =mlx4_alloc_icm_coherent (&dev->persist->pdev->dev, - &chunk->mem[chunk->npages], - cur_order, mask); + &chunk->buf[chunk->npages], + cur_order, mask);else - ret =mlx4_alloc_icm_pages (&chunk->mem[chunk->npages], + ret =mlx4_alloc_icm_pages (&chunk->sg[chunk->npages], cur_order, mask, dev->numa_node);
@@ -205,7 +204,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages,if (coherent) ++chunk->nsg;else if (chunk->npages ==MLX4_ICM_CHUNK_LEN ) { - chunk->nsg =pci_map_sg (dev->persist->pdev, chunk->mem, + chunk->nsg =pci_map_sg (dev->persist->pdev, chunk->sg, chunk->npages,PCI_DMA_BIDIRECTIONAL );
@@ -220,7 +219,7 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages, }if (!coherent && chunk) { - chunk->nsg =pci_map_sg (dev->persist->pdev, chunk->mem, + chunk->nsg =pci_map_sg (dev->persist->pdev, chunk->sg, chunk->npages,PCI_DMA_BIDIRECTIONAL );
@@ -320,7 +319,7 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj,u64 idx;struct mlx4_icm_chunk *chunk;struct mlx4_icm *icm; -struct page *page =NULL ; +void *addr =NULL ;if (!table->lowmem)return NULL ;
@@ -336,28 +335,49 @@ void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj,list_for_each_entry (chunk, &icm->chunk_list, list) {for (i =0 ; i < chunk->npages; ++i) { +dma_addr_t dma_addr; +size_t len; + +if (table->coherent) { + len = chunk->buf[i].size; + dma_addr = chunk->buf[i].dma_addr; + addr = chunk->buf[i].addr; + }else { +struct page *page; + + len =sg_dma_len (&chunk->sg[i]); + dma_addr =sg_dma_address (&chunk->sg[i]); + +/* XXX: we should never do this for highmem +* allocation. This function either needs +* to be split, or the kernel virtual address +* return needs to be made optional. +*/ + page =sg_page (&chunk->sg[i]); + addr =lowmem_page_address (page); + } +if (dma_handle && dma_offset >=0 ) { -if (sg_dma_len (&chunk->mem[i]) > dma_offset) - *dma_handle =sg_dma_address (&chunk->mem[i]) + - dma_offset; - dma_offset -=sg_dma_len (&chunk->mem[i]); +if (len > dma_offset) + *dma_handle = dma_addr + dma_offset; + dma_offset -= len; } +/* * DMA mapping can merge pages but not split them, * so if we found the page, dma_handle has already * been assigned to. */ -if (chunk->mem[i].length > offset) { - page =sg_page (&chunk->mem[i]); +if (len > offset) goto out; - } - offset -= chunk->mem[i].length; + offset -= len; } } + addr =NULL ; out:mutex_unlock (&table->mutex); -return page ?lowmem_page_address (page) + offset :NULL ; +return addr ? addr + offset :NULL ; } int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table,
drivers/net/ethernet/mellanox/mlx4/icm.h +19 -3
@@ -47,11 +47,21 @@ enum { MLX4_ICM_PAGE_SIZE = 1 << MLX4_ICM_PAGE_SHIFT, }; +struct mlx4_icm_buf { +void *addr; +size_t size; +dma_addr_t dma_addr; +}; +struct mlx4_icm_chunk {struct list_head list;int npages;int nsg; -struct scatterlist mem[MLX4_ICM_CHUNK_LEN ]; +bool coherent; +union { +struct scatterlist sg[MLX4_ICM_CHUNK_LEN ]; +struct mlx4_icm_buf buf[MLX4_ICM_CHUNK_LEN ]; + }; };struct mlx4_icm {
@@ -114,12 +124,18 @@ static inline void mlx4_icm_next(struct mlx4_icm_iter *iter)static inline dma_addr_t mlx4_icm_addr (struct mlx4_icm_iter *iter) { -return sg_dma_address (&iter->chunk->mem[iter->page_idx]); +if (iter->chunk->coherent) +return iter->chunk->buf[iter->page_idx].dma_addr; +else +return sg_dma_address (&iter->chunk->sg[iter->page_idx]); }static inline unsigned long mlx4_icm_size (struct mlx4_icm_iter *iter) { -return sg_dma_len (&iter->chunk->mem[iter->page_idx]); +if (iter->chunk->coherent) +return iter->chunk->buf[iter->page_idx].size; +else +return sg_dma_len (&iter->chunk->sg[iter->page_idx]); }int mlx4_MAP_ICM_AUX (struct mlx4_dev *dev,struct mlx4_icm *icm);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 51/183 MIPS: ath79: Enable OF serial ports in the default config
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ]
CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box.
--- arch/mips/configs/ath79_defconfig | 1 + 1 file changed, 1 insertion(+)
arch/mips/configs/ath79_defconfig +1 -0
@@ -71,6 +71,7 @@ CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AR933X=y CONFIG_SERIAL_AR933X_CONSOLE=y # CONFIG_HW_RANDOM is not set
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 52/183 xprtrdma: Double free in rpcrdma_sendctxs_create()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6e17f58c486d9554341f70aa5b63b8fbed07b3fa ]
The clean up is handled by the caller, rpcrdma_buffer_create(), so this call to rpcrdma_sendctxs_destroy() leads to a double free.
--- net/sunrpc/xprtrdma/verbs.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
net/sunrpc/xprtrdma/verbs.c +1 -5
@@ -912,17 +912,13 @@ static int rpcrdma_sendctxs_create(struct rpcrdma_xprt *r_xprt)for (i =0 ; i <= buf->rb_sc_last; i++) { sc =rpcrdma_sendctx_create (&r_xprt->rx_ia);if (!sc) - goto out_destroy; +return -ENOMEM ; sc->sc_xprt = r_xprt; buf->rb_sc_ctxs[i] = sc; }return 0 ; - -out_destroy: -rpcrdma_sendctxs_destroy (buf); -return -ENOMEM ; }/* The sendctx queue is not guaranteed to have a size that is a
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 53/183 mlxsw: spectrum_acl: Add cleanup after C-TCAM update error condition
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ff0db43cd6c530ff944773ccf48ece55d32d0c22 ]
When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert(). In case of C-TCAM HW insertion error, the opposite action should take place.
Add error handling case in which the C-TCAM region entry is removed, by calling cregion->ops->entry_remove().
--- .../net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_ctcam.c +9 -1
@@ -75,7 +75,15 @@ mlxsw_sp_acl_ctcam_region_entry_insert(struct mlxsw_sp *mlxsw_sp, act_set =mlxsw_afa_block_first_set (rulei->act_block);mlxsw_reg_ptce2_flex_action_set_memcpy_to (ptce2_pl, act_set); -return mlxsw_reg_write (mlxsw_sp->core,MLXSW_REG (ptce2), ptce2_pl); + err =mlxsw_reg_write (mlxsw_sp->core,MLXSW_REG (ptce2), ptce2_pl); +if (err) + goto err_ptce2_write; + +return 0 ; + +err_ptce2_write: + cregion->ops->entry_remove (cregion, centry); +return err; } static void
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 54/183 mlxsw: spectrum: Add VXLAN dependency for spectrum
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 143a8e038ac599ca73c6354c8af6a8fdeee9fa7d ]
When VXLAN is a loadable module, MLXSW_SPECTRUM must not be built-in:
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:2547: undefined reference to `vxlan_fdb_find_uc'
Add Kconfig dependency to enforce usable configurations.
--- drivers/net/ethernet/mellanox/mlxsw/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/mellanox/mlxsw/Kconfig +1 -0
@@ -78,6 +78,7 @@ config MLXSW_SPECTRUM depends on IPV6 || IPV6=n depends on NET_IPGRE || NET_IPGRE=n depends on IPV6_GRE || IPV6_GRE=n + depends on VXLAN || VXLAN=n select GENERIC_ALLOCATOR select PARMAN select MLXFW
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 55/183 selftests: forwarding: Add a test for VLAN deletion
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4fabf3bf93a194c7fa5288da3e0af37e4b943cf3 ]
Add a VLAN on a bridge port, delete it and make sure the PVID VLAN is not affected.
--- .../selftests/net/forwarding/bridge_vlan_aware.sh | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +14 -1
@@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding" +ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion" NUM_NETIFS=4 CHECK_TC="yes" source lib.sh
@@ -96,6 +96,19 @@ flooding() flood_test $swp2 $h1 $h2 } +vlan_deletion() +{ + # Test that the deletion of a VLAN on a bridge port does not affect + # the PVID VLAN + log_info "Add and delete a VLAN on bridge port $swp1" + + bridge vlan add vid 10 dev $swp1 + bridge vlan del vid 10 dev $swp1 + + ping_ipv4 + ping_ipv6 +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 56/183 netfilter: nf_tables: fix leaking object reference count
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b91d9036883793122cf6575ca4dfbfbdd201a83d ]
There is no code that decreases the reference count of stateful objects in error path of the nft_add_set_elem(). this causes a leak of reference count of stateful objects.
Test commands:
$nft add table ip filter
$nft add counter ip filter c1
$nft add map ip filter m1 { type ipv4_addr : counter \;} $nft add element ip filter m1 { 1 : c1 }
$nft add element ip filter m1 { 1 : c1 }
$nft delete element ip filter m1 { 1 }
$nft delete counter ip filter c1
Result:
Error: Could not process rule: Device or resource busy delete counter ip filter c1 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
At the second 'nft add element ip filter m1 { 1 : c1 }', the reference count of the 'c1' is increased then it tries to insert into the 'm1'. but the 'm1' already has same element so it returns -EEXIST.
But it doesn't decrease the reference count of the 'c1' in the error path. Due to a leak of the reference count of the 'c1', the 'c1' can't be removed by 'nft delete counter ip filter c1'.
--- net/netfilter/nf_tables_api.c | 2 ++ 1 file changed, 2 insertions(+)
net/netfilter/nf_tables_api.c +2 -0
@@ -4474,6 +4474,8 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, err5:kfree (trans); err4: +if (obj) + obj->use--;kfree (elem.priv); err3:if (nla[NFTA_SET_ELEM_DATA ] !=NULL )
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 57/183 scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_param
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 72b4a0465f995175a2e22cf4a636bf781f1f28a7 ]
The return code should be check while qla4xxx_copy_from_fwddb_param fails.
--- drivers/scsi/qla4xxx/ql4_os.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/qla4xxx/ql4_os.c +2 -0
@@ -7237,6 +7237,8 @@ static int qla4xxx_sysfs_ddb_tgt_create(struct scsi_qla_host *ha, rc =qla4xxx_copy_from_fwddb_param (fnode_sess, fnode_conn, fw_ddb_entry); +if (rc) + goto free_sess;ql4_printk (KERN_INFO , ha,"%s: sysfs entry %s created\n" , __func__, fnode_sess->dev.kobj.name);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 58/183 scsi: isci: initialize shost fully before calling scsi_add_host()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc29a1b0a3f2597ce887d339222fa85b9307706d ]
scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur.
However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed.
The bug was noticed after the struct request size was reduced by commit 9d037ad707ed ("block: remove req->timeout_list")
Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at:
RIP: 0010:t10_pi_complete+0x77/0x1c0
Call Trace:
<IRQ>
sd_done+0xf5/0x340
scsi_finish_command+0xc3/0x120
blk_done_softirq+0x83/0xb0
__do_softirq+0xa1/0x2e6
irq_exit+0xbc/0xd0
call_function_single_interrupt+0xf/0x20
</IRQ>sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete().
To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard().
--- drivers/scsi/isci/init.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/scsi/isci/init.c +7 -7
@@ -588,6 +588,13 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) shost->max_lun = ~0 ; shost->max_cmd_len =MAX_COMMAND_SIZE ; +/* turn on DIF support */ +scsi_host_set_prot (shost, +SHOST_DIF_TYPE1_PROTECTION | +SHOST_DIF_TYPE2_PROTECTION | +SHOST_DIF_TYPE3_PROTECTION ); +scsi_host_set_guard (shost,SHOST_DIX_GUARD_CRC ); + err =scsi_add_host (shost, &pdev->dev);if (err) goto err_shost;
@@ -675,13 +682,6 @@ static int isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto err_host_alloc; } pci_info->hosts[i] = h; - -/* turn on DIF support */ -scsi_host_set_prot (to_shost (h), -SHOST_DIF_TYPE1_PROTECTION | -SHOST_DIF_TYPE2_PROTECTION | -SHOST_DIF_TYPE3_PROTECTION ); -scsi_host_set_guard (to_shost (h),SHOST_DIX_GUARD_CRC ); } err =isci_setup_interrupts (pdev);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 59/183 include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3e2ffd655cc6a694608d997738989ff5572a8266 ]
Since commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") clang no longer reuses the OPTIMIZER_HIDE_VAR macro from compiler-gcc - instead it gets the version in include/linux/compiler.h. Unfortunately that version doesn't actually prevent compiler from optimizing out the variable.
Fix up by moving the macro out from compiler-gcc.h to compiler.h. Compilers without incline asm support will keep working since it's protected by an ifdef.
Also fix up comments to match reality since we are no longer overriding any macros.
Build-tested with gcc and clang.
--- include/linux/compiler-clang.h | 5 ++--- include/linux/compiler-gcc.h | 4 ---- include/linux/compiler-intel.h | 4 +--- include/linux/compiler.h | 4 +++- 4 files changed, 6 insertions(+), 11 deletions(-)
include/linux/compiler-clang.h +2 -3
@@ -3,9 +3,8 @@#error "Please don't include <linux/compiler-clang.h> directly, include <linux/compiler.h> instead."#endif -/* Some compiler specific definitions are overwritten here -* for Clang compiler -*/ +/* Compiler specific definitions for Clang compiler */ +#define uninitialized_var (x) x = *(&(x))/* same as gcc, this was present in clang-2.6 so we can assume it works
include/linux/compiler-gcc.h +0 -4
@@ -58,10 +58,6 @@ (typeof (ptr)) (__ptr + (off)); \ }) -/* Make the optimizer believe the variable can be manipulated arbitrarily. */ -#define OPTIMIZER_HIDE_VAR (var) \ - __asm__ ("" : "=r" (var) : "0" (var)) -/* * A trick to suppress uninitialized variable warning without generating any * code
include/linux/compiler-intel.h +1 -3
@@ -5,9 +5,7 @@#ifdef __ECC -/* Some compiler specific definitions are overwritten here -* for Intel ECC compiler -*/ +/* Compiler specific definitions for Intel ECC compiler */ #include <asm/intrinsics.h>
include/linux/compiler.h +3 -1
@@ -161,7 +161,9 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val,#endif #ifndef OPTIMIZER_HIDE_VAR -#define OPTIMIZER_HIDE_VAR (var) barrier() +/* Make the optimizer believe the variable can be manipulated arbitrarily. */ +#define OPTIMIZER_HIDE_VAR (var) \ + __asm__ ("" : "=r" (var) : "0" (var))#endif /* Not-quite-unique ID. */
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 60/183 MIPS: jazz: fix 64bit build
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ]
64bit JAZZ builds failed with
linux-next/arch/mips/jazz/jazzdma.c: In function vdma_init:
/linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration
of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`?
[-Werror=implicit-function-declaration]
pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
^~~~~~~~~
CKSEG1ADDR
/linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl);
^
In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0,
from /linux-next/include/linux/compiler.h:248,
from /linux-next/include/linux/kernel.h:10,
from /linux-next/arch/mips/jazz/jazzdma.c:11:
/linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from
pointer to integer of different size [-Werror=pointer-to-int-cast]
#define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */
^
/linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in
expansion of macro `_ACAST32_`
#define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff)
^~~~~~~~~
/linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of
macro `CPHYSADDR`
r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl));Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this.
--- arch/mips/jazz/jazzdma.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
arch/mips/jazz/jazzdma.c +3 -2
@@ -74,14 +74,15 @@ static int __init vdma_init(void) get_order(VDMA_PGTBL_SIZE));BUG_ON (!pgtbl);dma_cache_wback_inv ((unsigned long )pgtbl,VDMA_PGTBL_SIZE ); - pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR (pgtbl); + pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR ((unsigned long )pgtbl);/* * Clear the R4030 translation table */ vdma_pgtbl_init (); -r4030_write_reg32 (JAZZ_R4030_TRSTBL_BASE ,CPHYSADDR (pgtbl)); +r4030_write_reg32 (JAZZ_R4030_TRSTBL_BASE , +CPHYSADDR ((unsigned long )pgtbl));r4030_write_reg32 (JAZZ_R4030_TRSTBL_LIM ,VDMA_PGTBL_SIZE );r4030_write_reg32 (JAZZ_R4030_TRSTBL_INV ,0 );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 61/183 netfilter: nft_flow_offload: Fix reverse route lookup
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a799aea0988ea0d1b1f263e996fdad2f6133c680 ]
Using the following example:
client 1.1.1.7 ---> 2.2.2.7 which dnat to 10.0.0.7 server
The first reply packet (ie. syn+ack) uses an incorrect destination address for the reverse route lookup since it uses:
daddr = ct->tuplehash[!dir].tuple.dst.u3.ip;
which is 2.2.2.7 in the scenario that is described above, while this should be:
daddr = ct->tuplehash[dir].tuple.src.u3.ip;
that is 10.0.0.7.
--- net/netfilter/nft_flow_offload.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/netfilter/nft_flow_offload.c +2 -2
@@ -29,10 +29,10 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,memset (&fl,0 ,sizeof (fl));switch (nft_pf (pkt)) {case NFPROTO_IPV4 : - fl.u.ip4.daddr = ct->tuplehash[!dir].tuple.dst.u3.ip; + fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;break ;case NFPROTO_IPV6 : - fl.u.ip6.daddr = ct->tuplehash[!dir].tuple.dst.u3.in6; + fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;break ; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 62/183 bpf: correctly set initial window on active Fast Open sender
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 31aa6503a15ba00182ea6dbbf51afb63bf9e851d ]
The existing BPF TCP initial congestion window (TCP_BPF_IW) does not to work on (active) Fast Open sender. This is because it changes the (initial) window only if data_segs_out is zero -- but data_segs_out is also incremented on SYN-data. This patch fixes the issue by proerly accounting for SYN-data additionally.
--- net/core/filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/filter.c +1 -1
@@ -4019,7 +4019,7 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock,/* Only some options are supported */ switch (optname) {case TCP_BPF_IW : -if (val <=0 || tp->data_segs_out >0 ) +if (val <=0 || tp->data_segs_out > tp->syn_data) ret = -EINVAL ;else tp->snd_cwnd = val;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 63/183 pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9f51c05dc41a6d69423e3d03d18eb7ab22f9ec19 ]
The problem is that we call this with a spin lock held. The call tree is:pvcalls_front_accept() holds bedata->socket_lock.
-> create_active()
-> __get_free_pages() uses GFP_KERNELThe create_active() function is only called from pvcalls_front_accept() with a spin_lock held, The allocation is not allowed to sleep and GFP_KERNEL is not sufficient.
This issue was detected by using the Coccinelle software.
v2: Add a function doing the allocations which is called
outside the lock and passing the allocated data to create_active().
v3: Use the matching deallocators i.e., free_page()
and free_pages(), respectively.
v4: It would be better to pre-populate map (struct sock_mapping),
rather than introducing one more new struct.
v5: Since allocating the data outside of this call it should also
be freed outside, when create_active() fails.
Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and use GFP_KERNEL instead.
v6: Drop the superfluous calls.
--- drivers/xen/pvcalls-front.c | 81 +++++++++++++++++++++++++++---------- 1 file changed, 59 insertions(+), 22 deletions(-)
drivers/xen/pvcalls-front.c +59 -22
@@ -341,6 +341,39 @@ int pvcalls_front_socket(struct socket *sock)return ret; } +static void free_active_ring (struct sock_mapping *map) +{ +free_pages ((unsigned long )map->active.data.in, + map->active.ring->ring_order); +free_page ((unsigned long )map->active.ring); +} + +static int alloc_active_ring (struct sock_mapping *map) +{ +void *bytes; + + map->active.ring = (struct pvcalls_data_intf *) +get_zeroed_page (GFP_KERNEL ); +if (!map->active.ring) + goto out; + + map->active.ring->ring_order =PVCALLS_RING_ORDER ; + bytes = (void *)__get_free_pages (GFP_KERNEL | __GFP_ZERO, +PVCALLS_RING_ORDER ); +if (!bytes) + goto out; + + map->active.data.in = bytes; + map->active.data.out = bytes + +XEN_FLEX_RING_SIZE (PVCALLS_RING_ORDER ); + +return 0 ; + +out: +free_active_ring (map); +return -ENOMEM ; +} +static int create_active (struct sock_mapping *map,int *evtchn) {void *bytes;
@@ -349,15 +382,7 @@ static int create_active(struct sock_mapping *map, int *evtchn) *evtchn =-1 ;init_waitqueue_head (&map->active.inflight_conn_req); - map->active.ring = (struct pvcalls_data_intf *) -__get_free_page (GFP_KERNEL | __GFP_ZERO); -if (map->active.ring ==NULL ) - goto out_error; - map->active.ring->ring_order =PVCALLS_RING_ORDER ; - bytes = (void *)__get_free_pages (GFP_KERNEL | __GFP_ZERO, -PVCALLS_RING_ORDER ); -if (bytes ==NULL ) - goto out_error; + bytes = map->active.data.in;for (i =0 ; i < (1 <<PVCALLS_RING_ORDER ); i++) map->active.ring->ref[i] = gnttab_grant_foreign_access( pvcalls_front_dev->otherend_id,
@@ -367,10 +392,6 @@ static int create_active(struct sock_mapping *map, int *evtchn) pvcalls_front_dev->otherend_id, pfn_to_gfn(virt_to_pfn((void *)map->active.ring)), 0); - map->active.data.in = bytes; - map->active.data.out = bytes + -XEN_FLEX_RING_SIZE (PVCALLS_RING_ORDER ); - ret =xenbus_alloc_evtchn (pvcalls_front_dev, evtchn);if (ret) goto out_error;
@@ -391,8 +412,6 @@ static int create_active(struct sock_mapping *map, int *evtchn) out_error:if (*evtchn >=0 )xenbus_free_evtchn (pvcalls_front_dev, *evtchn); -free_pages ((unsigned long )map->active.data.in,PVCALLS_RING_ORDER ); -free_page ((unsigned long )map->active.ring);return ret; }
@@ -412,17 +431,24 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,return PTR_ERR (map); bedata =dev_get_drvdata (&pvcalls_front_dev->dev); + ret =alloc_active_ring (map); +if (ret <0 ) { +pvcalls_exit_sock (sock); +return ret; + }spin_lock (&bedata->socket_lock); ret =get_request (bedata, &req_id);if (ret <0 ) {spin_unlock (&bedata->socket_lock); +free_active_ring (map);pvcalls_exit_sock (sock);return ret; } ret =create_active (map, &evtchn);if (ret <0 ) {spin_unlock (&bedata->socket_lock); +free_active_ring (map);pvcalls_exit_sock (sock);return ret; }
@@ -784,25 +810,36 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags) } } -spin_lock (&bedata->socket_lock); - ret =get_request (bedata, &req_id); -if (ret <0 ) { + map2 =kzalloc (sizeof (*map2),GFP_KERNEL ); +if (map2 ==NULL ) {clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , (void *)&map->passive.flags); -spin_unlock (&bedata->socket_lock); +pvcalls_exit_sock (sock); +return -ENOMEM ; + } + ret =alloc_active_ring (map2); +if (ret <0 ) { +clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , + (void *)&map->passive.flags); +kfree (map2);pvcalls_exit_sock (sock);return ret; } - map2 =kzalloc (sizeof (*map2),GFP_ATOMIC ); -if (map2 ==NULL ) { +spin_lock (&bedata->socket_lock); + ret =get_request (bedata, &req_id); +if (ret <0 ) {clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , (void *)&map->passive.flags);spin_unlock (&bedata->socket_lock); +free_active_ring (map2); +kfree (map2);pvcalls_exit_sock (sock); -return -ENOMEM ; +return ret; } + ret =create_active (map2, &evtchn);if (ret <0 ) { +free_active_ring (map2);kfree (map2);clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , (void *)&map->passive.flags);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 63/183 pvcalls-front: Avoid get_free_pages(GFP_KERNEL) under spinlock
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9f51c05dc41a6d69423e3d03d18eb7ab22f9ec19 ]
The problem is that we call this with a spin lock held. The call tree is:pvcalls_front_accept() holds bedata->socket_lock.
-> create_active()
-> __get_free_pages() uses GFP_KERNELThe create_active() function is only called from pvcalls_front_accept() with a spin_lock held, The allocation is not allowed to sleep and GFP_KERNEL is not sufficient.
This issue was detected by using the Coccinelle software.
v2: Add a function doing the allocations which is called
outside the lock and passing the allocated data to create_active().
v3: Use the matching deallocators i.e., free_page()
and free_pages(), respectively.
v4: It would be better to pre-populate map (struct sock_mapping),
rather than introducing one more new struct.
v5: Since allocating the data outside of this call it should also
be freed outside, when create_active() fails.
Move kzalloc(sizeof(*map2), GFP_ATOMIC) outside spinlock and use GFP_KERNEL instead.
v6: Drop the superfluous calls.
--- drivers/xen/pvcalls-front.c | 81 +++++++++++++++++++++++++++---------- 1 file changed, 59 insertions(+), 22 deletions(-)
drivers/xen/pvcalls-front.c +59 -22
@@ -341,6 +341,39 @@ int pvcalls_front_socket(struct socket *sock)return ret; } +static void free_active_ring (struct sock_mapping *map) +{ +free_pages ((unsigned long )map->active.data.in, + map->active.ring->ring_order); +free_page ((unsigned long )map->active.ring); +} + +static int alloc_active_ring (struct sock_mapping *map) +{ +void *bytes; + + map->active.ring = (struct pvcalls_data_intf *) +get_zeroed_page (GFP_KERNEL ); +if (!map->active.ring) + goto out; + + map->active.ring->ring_order =PVCALLS_RING_ORDER ; + bytes = (void *)__get_free_pages (GFP_KERNEL | __GFP_ZERO, +PVCALLS_RING_ORDER ); +if (!bytes) + goto out; + + map->active.data.in = bytes; + map->active.data.out = bytes + +XEN_FLEX_RING_SIZE (PVCALLS_RING_ORDER ); + +return 0 ; + +out: +free_active_ring (map); +return -ENOMEM ; +} +static int create_active (struct sock_mapping *map,int *evtchn) {void *bytes;
@@ -349,15 +382,7 @@ static int create_active(struct sock_mapping *map, int *evtchn) *evtchn =-1 ;init_waitqueue_head (&map->active.inflight_conn_req); - map->active.ring = (struct pvcalls_data_intf *) -__get_free_page (GFP_KERNEL | __GFP_ZERO); -if (map->active.ring ==NULL ) - goto out_error; - map->active.ring->ring_order =PVCALLS_RING_ORDER ; - bytes = (void *)__get_free_pages (GFP_KERNEL | __GFP_ZERO, -PVCALLS_RING_ORDER ); -if (bytes ==NULL ) - goto out_error; + bytes = map->active.data.in;for (i =0 ; i < (1 <<PVCALLS_RING_ORDER ); i++) map->active.ring->ref[i] = gnttab_grant_foreign_access( pvcalls_front_dev->otherend_id,
@@ -367,10 +392,6 @@ static int create_active(struct sock_mapping *map, int *evtchn) pvcalls_front_dev->otherend_id, pfn_to_gfn(virt_to_pfn((void *)map->active.ring)), 0); - map->active.data.in = bytes; - map->active.data.out = bytes + -XEN_FLEX_RING_SIZE (PVCALLS_RING_ORDER ); - ret =xenbus_alloc_evtchn (pvcalls_front_dev, evtchn);if (ret) goto out_error;
@@ -391,8 +412,6 @@ static int create_active(struct sock_mapping *map, int *evtchn) out_error:if (*evtchn >=0 )xenbus_free_evtchn (pvcalls_front_dev, *evtchn); -free_pages ((unsigned long )map->active.data.in,PVCALLS_RING_ORDER ); -free_page ((unsigned long )map->active.ring);return ret; }
@@ -412,17 +431,24 @@ int pvcalls_front_connect(struct socket *sock, struct sockaddr *addr,return PTR_ERR (map); bedata =dev_get_drvdata (&pvcalls_front_dev->dev); + ret =alloc_active_ring (map); +if (ret <0 ) { +pvcalls_exit_sock (sock); +return ret; + }spin_lock (&bedata->socket_lock); ret =get_request (bedata, &req_id);if (ret <0 ) {spin_unlock (&bedata->socket_lock); +free_active_ring (map);pvcalls_exit_sock (sock);return ret; } ret =create_active (map, &evtchn);if (ret <0 ) {spin_unlock (&bedata->socket_lock); +free_active_ring (map);pvcalls_exit_sock (sock);return ret; }
@@ -784,25 +810,36 @@ int pvcalls_front_accept(struct socket *sock, struct socket *newsock, int flags) } } -spin_lock (&bedata->socket_lock); - ret =get_request (bedata, &req_id); -if (ret <0 ) { + map2 =kzalloc (sizeof (*map2),GFP_KERNEL ); +if (map2 ==NULL ) {clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , (void *)&map->passive.flags); -spin_unlock (&bedata->socket_lock); +pvcalls_exit_sock (sock); +return -ENOMEM ; + } + ret =alloc_active_ring (map2); +if (ret <0 ) { +clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , + (void *)&map->passive.flags); +kfree (map2);pvcalls_exit_sock (sock);return ret; } - map2 =kzalloc (sizeof (*map2),GFP_ATOMIC ); -if (map2 ==NULL ) { +spin_lock (&bedata->socket_lock); + ret =get_request (bedata, &req_id); +if (ret <0 ) {clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , (void *)&map->passive.flags);spin_unlock (&bedata->socket_lock); +free_active_ring (map2); +kfree (map2);pvcalls_exit_sock (sock); -return -ENOMEM ; +return ret; } + ret =create_active (map2, &evtchn);if (ret <0 ) { +free_active_ring (map2);kfree (map2);clear_bit (PVCALLS_FLAG_ACCEPT_INFLIGHT , (void *)&map->passive.flags);
Signature · 9 lines
2.19.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Greg Kroah-Hartman
maintainerPATCH 64/183 selftests: bpf: install files tcp_(server|client)*.py
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f98937c6bb73ae11717a15aec85c187d33ca5d34 ]
When test_tcpbpf_user runs it complains that it can't find files tcp_server.py and tcp_client.py.
Rework so that tcp_server.py and tcp_client.py gets installed, added them to the variable TEST_PROGS_EXTENDED.
--- tools/testing/selftests/bpf/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
tools/testing/selftests/bpf/Makefile +3 -1
@@ -53,7 +53,9 @@ TEST_PROGS := test_kmod.sh \ test_flow_dissector.sh \ test_xdp_vlan.sh -TEST_PROGS_EXTENDED := with_addr.sh +TEST_PROGS_EXTENDED := with_addr.sh \ + tcp_client.py \ + tcp_server.py # Compile but not part of 'make run_tests' TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user \
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 65/183 bpf: fix panic in stack_map_get_build_id() on i386 and arm32
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit beaf3d1901f4ea46fbd5c9d857227d99751de469 ]
As Naresh reported, test_stacktrace_build_id() causes panic on i386 and arm32 systems. This is caused by page_address() returns NULL in certain cases.
This patch fixes this error by using kmap_atomic/kunmap_atomic instead of page_address.
--- kernel/bpf/stackmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/bpf/stackmap.c +2 -1
@@ -260,7 +260,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma,return -EFAULT ;/* page not mapped */ ret = -EINVAL ; - page_addr =page_address (page); + page_addr =kmap_atomic (page); ehdr = (Elf32_Ehdr *)page_addr;/* compare magic x7f "ELF" */
@@ -276,6 +276,7 @@ static int stack_map_get_build_id(struct vm_area_struct *vma,else if (ehdr->e_ident[EI_CLASS ] ==ELFCLASS64 ) ret =stack_map_get_build_id_64 (page_addr, build_id); out: +kunmap_atomic (page_addr);put_page (page);return ret; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 66/183 afs: Set correct lock type for the yfs CreateFile
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5edc22cc1d33d6a88d175d25adc38d2a5cee134d ]
A lock type of 0 is "LockRead", which makes the fileserver record an unintentional read lock on the new file. This will cause problems later on if the file is the subject of locking operations.
The correct default value should be -1 ("LockNone").
Fix the operation marshalling code to set the value and provide an enum to symbolise the values whilst we're at it.
--- fs/afs/protocol_yfs.h | 11 +++++++++++ fs/afs/yfsclient.c | 2 +- 2 files changed, 12 insertions(+), 1 deletion(-)
fs/afs/protocol_yfs.h +11 -0
@@ -161,3 +161,14 @@ struct yfs_xdr_YFSStoreVolumeStatus {struct yfs_xdr_u64 max_quota;struct yfs_xdr_u64 file_quota; } __packed; + +enum yfs_lock_type { + yfs_LockNone =-1 , + yfs_LockRead =0 , + yfs_LockWrite =1 , + yfs_LockExtend =2 , + yfs_LockRelease =3 , + yfs_LockMandatoryRead =0x100 , + yfs_LockMandatoryWrite =0x101 , + yfs_LockMandatoryExtend =0x102 , +};
fs/afs/yfsclient.c +1 -1
@@ -803,7 +803,7 @@ int yfs_fs_create_file(struct afs_fs_cursor *fc, bp =xdr_encode_YFSFid (bp, &vnode->fid); bp =xdr_encode_string (bp, name, namesz); bp =xdr_encode_YFSStoreStatus_mode (bp, mode); - bp =xdr_encode_u32 (bp,0 );/* ViceLockType */ + bp =xdr_encode_u32 (bp, yfs_LockNone);/* ViceLockType */ yfs_check_req (call, bp);afs_use_fs_server (call, fc->cbi);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 67/183 netfilter: nft_flow_offload: fix interaction with vrf slave device
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 10f4e765879e514e1ce7f52ed26603047af196e2 ]
In the forward chain, the iif is changed from slave device to master vrf device. Thus, flow offload does not find a match on the lower slave device.
This patch uses the cached route, ie. dst->dev, to update the iif and oif fields in the flow entry.
After this patch, the following example works fine:
# ip addr add dev eth0 1.1.1.1/24 # ip addr add dev eth1 10.0.0.1/24 # ip link add user1 type vrf table 1 # ip l set user1 up # ip l set dev eth0 master user1 # ip l set dev eth1 master user1
# nft add table firewall
# nft add flowtable f fb1 { hook ingress priority 0 \; devices = { eth0, eth1 } \; }
# nft add chain f ftb-all {type filter hook forward priority 0 \; policy accept \; }
# nft add rule f ftb-all ct zone 1 ip protocol tcp flow offload @fb1
# nft add rule f ftb-all ct zone 1 ip protocol udp flow offload @fb1--- include/net/netfilter/nf_flow_table.h | 1 - net/netfilter/nf_flow_table_core.c | 5 +++-- net/netfilter/nft_flow_offload.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)
include/net/netfilter/nf_flow_table.h +0 -1
@@ -84,7 +84,6 @@ struct flow_offload {struct nf_flow_route {struct {struct dst_entry *dst; -int ifindex; } tuple[FLOW_OFFLOAD_DIR_MAX ]; };
net/netfilter/nf_flow_table_core.c +3 -2
@@ -28,6 +28,7 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct, {struct flow_offload_tuple *ft = &flow->tuplehash[dir].tuple;struct nf_conntrack_tuple *ctt = &ct->tuplehash[dir].tuple; +struct dst_entry *other_dst = route->tuple[!dir].dst;struct dst_entry *dst = route->tuple[dir].dst; ft->dir = dir;
@@ -50,8 +51,8 @@ flow_offload_fill_dir(struct flow_offload *flow, struct nf_conn *ct, ft->src_port = ctt->src.u.tcp.port; ft->dst_port = ctt->dst.u.tcp.port; - ft->iifidx = route->tuple[dir].ifindex; - ft->oifidx = route->tuple[!dir].ifindex; + ft->iifidx = other_dst->dev->ifindex; + ft->oifidx = dst->dev->ifindex; ft->dst_cache = dst; }
net/netfilter/nft_flow_offload.c +2 -2
@@ -30,9 +30,11 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,switch (nft_pf (pkt)) {case NFPROTO_IPV4 : fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip; + fl.u.ip4.flowi4_oif =nft_in (pkt)->ifindex;break ;case NFPROTO_IPV6 : fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6; + fl.u.ip6.flowi6_oif =nft_in (pkt)->ifindex;break ; }
@@ -41,9 +43,7 @@ static int nft_flow_route(const struct nft_pktinfo *pkt,return -ENOENT ; route->tuple[dir].dst = this_dst; - route->tuple[dir].ifindex =nft_in (pkt)->ifindex; route->tuple[!dir].dst = other_dst; - route->tuple[!dir].ifindex =nft_out (pkt)->ifindex;return 0 ; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 68/183 RDMA/mthca: Clear QP objects during their allocation
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9d9f59b4204bc41896c866b3e5856e5b416aa199 ]
As part of audit process to update drivers to use rdma_restrack_add() ensure that QP objects is cleared before access. Such change fixes the crash observed with uninitialized non zero sgid attr accessed by ib_destroy_qp().
CPU: 3 PID: 74 Comm: kworker/u16:1 Not tainted 4.19.10-300.fc29.x86_64 Workqueue: ipoib_wq ipoib_cm_tx_reap [ib_ipoib] RIP: 0010:rdma_put_gid_attr+0x9/0x30 [ib_core] RSP: 0018:ffffb7ad819dbde8 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8d1bdf5a2e00 RCX: 0000000000002699 RDX: 206c656e72656af8 RSI: ffff8d1bf7ae6160 RDI: 206c656e72656b20 RBP: 0000000000000000 R08: 0000000000026160 R09: ffffffffc06b45bf R10: ffffe849887da000 R11: 0000000000000002 R12: ffff8d1be30cb400 R13: ffff8d1bdf681800 R14: ffff8d1be2272400 R15: ffff8d1be30ca000 FS: 0000000000000000(0000) GS:ffff8d1bf7ac0000(0000) knlGS:0000000000000000 Trace: ib_destroy_qp+0xc9/0x240 [ib_core] ipoib_cm_tx_reap+0x1f9/0x4e0 [ib_ipoib] process_one_work+0x1a1/0x3a0 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40
--- drivers/infiniband/hw/mthca/mthca_provider.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/hw/mthca/mthca_provider.c +2 -2
@@ -533,7 +533,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd, {struct mthca_ucontext *context; - qp =kmalloc (sizeof *qp,GFP_KERNEL ); + qp =kzalloc (sizeof (*qp),GFP_KERNEL );if (!qp)return ERR_PTR (-ENOMEM );
@@ -599,7 +599,7 @@ static struct ib_qp *mthca_create_qp(struct ib_pd *pd,if (pd->uobject)return ERR_PTR (-EINVAL ); - qp =kmalloc (sizeof (struct mthca_sqp ),GFP_KERNEL ); + qp =kzalloc (sizeof (struct mthca_sqp ),GFP_KERNEL );if (!qp)return ERR_PTR (-ENOMEM );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 69/183 powerpc/8xx: fix setting of pagetable for Abatron BDI debug tool.
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fb0bdec51a4901b7dd088de0a1e365e1b9f5cd21 ]
Commit 8c8c10b90d88 ("powerpc/8xx: fix handling of early NULL pointer dereference") moved the loading of r6 earlier in the code. As some functions are called inbetween, r6 needs to be loaded again with the address of swapper_pg_dir in order to set PTE pointers for the Abatron BDI.
--- arch/powerpc/kernel/head_8xx.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/powerpc/kernel/head_8xx.S +2 -1
@@ -927,11 +927,12 @@ start_here: /* set up the PTE pointers for the Abatron bdiGDB. */ - tovirt(r6,r6) lis r5, abatron_pteptrs@h ori r5, r5, abatron_pteptrs@l stw r5, 0xf0(0) /* Must match your Abatron config file */ tophys(r5,r5) + lis r6, swapper_pg_dir@h + ori r6, r6, swapper_pg_dir@l stw r6, 0(r5) /* Now turn on the MMU for real! */
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 70/183 acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0919871ac37fdcf46c7657da0f1742efe096b399 ]
Possible race accessing memdev structures after dropping the mutex. Dan Williams says this could race against another thread that is doing:
# echo "ACPI0012:00" > /sys/bus/acpi/drivers/nfit/unbind
--- drivers/acpi/nfit/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/acpi/nfit/core.c +4 -2
@@ -724,6 +724,7 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)struct acpi_nfit_memory_map *memdev;struct acpi_nfit_desc *acpi_desc;struct nfit_mem *nfit_mem; +u16 physical_id;mutex_lock (&acpi_desc_lock);list_for_each_entry (acpi_desc, &acpi_descs, list) {
@@ -731,10 +732,11 @@ int nfit_get_smbios_id(u32 device_handle, u16 *flags)list_for_each_entry (nfit_mem, &acpi_desc->dimms, list) { memdev =__to_nfit_memdev (nfit_mem);if (memdev->device_handle == device_handle) { + *flags = memdev->flags; + physical_id = memdev->physical_id;mutex_unlock (&acpi_desc->init_mutex);mutex_unlock (&acpi_desc_lock); - *flags = memdev->flags; -return memdev->physical_id; +return physical_id; } }mutex_unlock (&acpi_desc->init_mutex);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 71/183 net: stmmac: Fix PCI module removal leak
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6dea7e1881fd86b80da64e476ac398008daed857 ]
Since commit b7d0f08e9129, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac.
Fix this by manually unmapping regions on remove callback.
Changes from v1:
- Fix build error
--- drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c +10 -0
@@ -299,7 +299,17 @@ static int stmmac_pci_probe(struct pci_dev *pdev,*/ static void stmmac_pci_remove (struct pci_dev *pdev) { +int i; +stmmac_dvr_remove (&pdev->dev); + +for (i =0 ; i <=PCI_STD_RESOURCE_END ; i++) { +if (pci_resource_len (pdev, i) ==0 ) +continue ; +pcim_iounmap_regions (pdev,BIT (i)); +break ; + } +pci_disable_device (pdev); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 72/183 net: stmmac: dwxgmac2: Only clear interrupts that are active
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fcc509eb10ff4794641e6ad3082118287a750d0a ]
In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts.
--- drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +3 -3
@@ -263,6 +263,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr, struct stmmac_extra_stats *x, u32 chan) {u32 intr_status =readl (ioaddr +XGMAC_DMA_CH_STATUS (chan)); +u32 intr_en =readl (ioaddr +XGMAC_DMA_CH_INT_EN (chan));int ret =0 ;/* ABNORMAL interrupts */
@@ -282,8 +283,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr, x->normal_irq_n++;if (likely (intr_status &XGMAC_RI )) { -u32 value =readl (ioaddr +XGMAC_DMA_CH_INT_EN (chan)); -if (likely (value &XGMAC_RIE )) { +if (likely (intr_en &XGMAC_RIE )) { x->rx_normal_irq_n++; ret |= handle_rx; }
@@ -295,7 +295,7 @@ static int dwxgmac2_dma_interrupt(void __iomem *ioaddr, }/* Clear interrupts */ -writel (~0x0 , ioaddr +XGMAC_DMA_CH_STATUS (chan)); +writel (intr_en & intr_status, ioaddr +XGMAC_DMA_CH_STATUS (chan));return ret; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 73/183 net: stmmac: Check if CBS is supported before configuring
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0650d4017f4d2eee67230a02285a7ae5204240c2 ]
Check if CBS is currently supported before trying to configure it in HW.
--- drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +2 -0
@@ -301,6 +301,8 @@ static int tc_setup_cbs(struct stmmac_priv *priv,/* Queue 0 is not AVB capable */ if (queue <=0 || queue >= tx_queues_count)return -EINVAL ; +if (!priv->dma_cap.av) +return -EOPNOTSUPP ;if (priv->speed !=SPEED_100 && priv->speed !=SPEED_1000 )return -EOPNOTSUPP ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 74/183 net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 3b5094665e273c4a2a99f7f5f16977c0f1e19095 ]
RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not.
Fix this by checking earlier if user wants Watchdog disabled or not.
--- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +12 -12
@@ -4194,6 +4194,18 @@ static int stmmac_hw_init(struct stmmac_priv *priv)return ret; } +/* Rx Watchdog is available in the COREs newer than the 3.40. +* In some case, for example on bugged HW this feature +* has to be disable and this can be done by passing the +* riwt_off field from the platform. +*/ +if (((priv->synopsys_id >=DWMAC_CORE_3_50 ) || + (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) { + priv->use_riwt =1 ; +dev_info (priv->device, +"Enable RX Mitigation via HW Watchdog Timer\n" ); + } +return 0 ; }
@@ -4326,18 +4338,6 @@ int stmmac_dvr_probe(struct device *device,if (flow_ctrl) priv->flow_ctrl =FLOW_AUTO ;/* RX/TX pause on */ -/* Rx Watchdog is available in the COREs newer than the 3.40. -* In some case, for example on bugged HW this feature -* has to be disable and this can be done by passing the -* riwt_off field from the platform. -*/ -if (((priv->synopsys_id >=DWMAC_CORE_3_50 ) || - (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) { - priv->use_riwt =1 ; -dev_info (priv->device, -"Enable RX Mitigation via HW Watchdog Timer\n" ); - } -/* Setup channels NAPI */ maxq =max (priv->plat->rx_queues_to_use, priv->plat->tx_queues_to_use);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 75/183 net: stmmac: Prevent RX starvation in stmmac_napi_poll()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit fa0be0a43f101888ac677dba31b590963eafeaa1 ]
Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget.
This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low.
Let's give always the same budget for RX and TX clean.
While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status.
--- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 27 ++++++++++--------- 1 file changed, 14 insertions(+), 13 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +14 -13
@@ -3525,27 +3525,28 @@ static int stmmac_napi_poll(struct napi_struct *napi, int budget)struct stmmac_channel *ch = container_of(napi, struct stmmac_channel, napi);struct stmmac_priv *priv = ch->priv_data; -int work_done =0 , work_rem = budget; +int work_done, rx_done =0 , tx_done =0 ;u32 chan = ch->index; priv->xstats.napi_poll++; -if (ch->has_tx) { -int done =stmmac_tx_clean (priv, work_rem, chan); +if (ch->has_tx) + tx_done =stmmac_tx_clean (priv, budget, chan); +if (ch->has_rx) + rx_done =stmmac_rx (priv, budget, chan); - work_done += done; - work_rem -= done; - } - -if (ch->has_rx) { -int done =stmmac_rx (priv, work_rem, chan); + work_done =max (rx_done, tx_done); + work_done =min (work_done, budget); - work_done += done; - work_rem -= done; - } +if (work_done < budget &&napi_complete_done (napi, work_done)) { +int stat; -if (work_done < budget &&napi_complete_done (napi, work_done))stmmac_enable_dma_irq (priv, priv->ioaddr, chan); + stat =stmmac_dma_interrupt_status (priv, priv->ioaddr, + &priv->xstats, chan); +if (stat &&napi_reschedule (napi)) +stmmac_disable_dma_irq (priv, priv->ioaddr, chan); + }return work_done; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 76/183 isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2ff33d6637393fe9348357285931811b76e1402f ]
The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be concurrently executed.
isdn_tty_tiocmset
isdn_tty_modem_hup
line 719: kfree(info->dtmf_state);
line 721: kfree(info->silence_state);
line 723: kfree(info->adpcms);
line 725: kfree(info->adpcmr);isdn_tty_set_termios
isdn_tty_modem_hup
line 719: kfree(info->dtmf_state);
line 721: kfree(info->silence_state);
line 723: kfree(info->adpcms);
line 725: kfree(info->adpcmr);Thus, some concurrency double-free bugs may occur.
These possible bugs are found by a static tool written by myself and my manual code review.
To fix these possible bugs, the mutex lock "modem_info_mutex" used in isdn_tty_tiocmset() is added in isdn_tty_set_termios().
--- drivers/isdn/i4l/isdn_tty.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/isdn/i4l/isdn_tty.c +5 -1
@@ -1437,15 +1437,19 @@ isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) {modem_info *info = (modem_info *) tty->driver_data; +mutex_lock (&modem_info_mutex);if (!old_termios)isdn_tty_change_speed (info);else {if (tty->termios.c_cflag == old_termios->c_cflag && tty->termios.c_ispeed == old_termios->c_ispeed && - tty->termios.c_ospeed == old_termios->c_ospeed) + tty->termios.c_ospeed == old_termios->c_ospeed) { +mutex_unlock (&modem_info_mutex);return ; + }isdn_tty_change_speed (info); } +mutex_unlock (&modem_info_mutex); }/*
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 77/183 scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit a94a2572b97744d3a35a1996df0e5cf6b2461a4a ]
Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached.
This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue.
--- drivers/target/target_core_user.c | 88 +++++++++++++++++++++---------- 1 file changed, 61 insertions(+), 27 deletions(-)
drivers/target/target_core_user.c +61 -27
@@ -148,7 +148,7 @@ struct tcmu_dev {size_t ring_size;struct mutex cmdr_lock; -struct list_head cmdr_queue; +struct list_head qfull_queue;uint32_t dbi_max;uint32_t dbi_thresh;
@@ -159,6 +159,7 @@ struct tcmu_dev {struct timer_list cmd_timer;unsigned int cmd_time_out; +struct list_head inflight_queue;struct timer_list qfull_timer;int qfull_time_out;
@@ -179,7 +180,7 @@ struct tcmu_dev {struct tcmu_cmd {struct se_cmd *se_cmd;struct tcmu_dev *tcmu_dev; -struct list_head cmdr_queue_entry; +struct list_head queue_entry;uint16_t cmd_id;
@@ -192,6 +193,7 @@ struct tcmu_cmd {unsigned long deadline;#define TCMU_CMD_BIT_EXPIRED 0 +#define TCMU_CMD_BIT_INFLIGHT 1unsigned long flags; };/*
@@ -586,7 +588,7 @@ static struct tcmu_cmd *tcmu_alloc_cmd(struct se_cmd *se_cmd)if (!tcmu_cmd)return NULL ; -INIT_LIST_HEAD (&tcmu_cmd->cmdr_queue_entry); +INIT_LIST_HEAD (&tcmu_cmd->queue_entry); tcmu_cmd->se_cmd = se_cmd; tcmu_cmd->tcmu_dev = udev;
@@ -915,11 +917,13 @@ static int tcmu_setup_cmd_timer(struct tcmu_cmd *tcmu_cmd, unsigned int tmo,return 0 ; tcmu_cmd->deadline =round_jiffies_up (jiffies +msecs_to_jiffies (tmo)); -mod_timer (timer, tcmu_cmd->deadline); +if (!timer_pending (timer)) +mod_timer (timer, tcmu_cmd->deadline); +return 0 ; } -static int add_to_cmdr_queue (struct tcmu_cmd *tcmu_cmd) +static int add_to_qfull_queue (struct tcmu_cmd *tcmu_cmd) {struct tcmu_dev *udev = tcmu_cmd->tcmu_dev;unsigned int tmo;
@@ -942,7 +946,7 @@ static int add_to_cmdr_queue(struct tcmu_cmd *tcmu_cmd)if (ret)return ret; -list_add_tail (&tcmu_cmd->cmdr_queue_entry, &udev->cmdr_queue); +list_add_tail (&tcmu_cmd->queue_entry, &udev->qfull_queue);pr_debug ("adding cmd %u on dev %s to ring space wait queue\n" , tcmu_cmd->cmd_id, udev->name);return 0 ;
@@ -999,7 +1003,7 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err) base_command_size =tcmu_cmd_get_base_cmd_size (tcmu_cmd->dbi_cnt); command_size =tcmu_cmd_get_cmd_size (tcmu_cmd, base_command_size); -if (!list_empty (&udev->cmdr_queue)) +if (!list_empty (&udev->qfull_queue)) goto queue; mb = udev->mb_addr;
@@ -1096,13 +1100,16 @@ static sense_reason_t queue_cmd_ring(struct tcmu_cmd *tcmu_cmd, int *scsi_err)UPDATE_HEAD (mb->cmd_head, command_size, udev->cmdr_size);tcmu_flush_dcache_range (mb,sizeof (*mb)); +list_add_tail (&tcmu_cmd->queue_entry, &udev->inflight_queue); +set_bit (TCMU_CMD_BIT_INFLIGHT , &tcmu_cmd->flags); +/* TODO: only if FLUSH and FUA? */ uio_event_notify (&udev->uio_info);return 0 ; queue: -if (add_to_cmdr_queue (tcmu_cmd)) { +if (add_to_qfull_queue (tcmu_cmd)) { *scsi_err =TCM_OUT_OF_RESOURCES ;return -1 ; }
@@ -1145,6 +1152,8 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *if (test_bit (TCMU_CMD_BIT_EXPIRED , &cmd->flags)) goto out; +list_del_init (&cmd->queue_entry); +tcmu_cmd_reset_dbi_cur (cmd);if (entry->hdr.uflags &TCMU_UFLAG_UNKNOWN_OP ) {
@@ -1194,9 +1203,29 @@ static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *tcmu_free_cmd (cmd); } +static void tcmu_set_next_deadline (struct list_head *queue, +struct timer_list *timer) +{ +struct tcmu_cmd *tcmu_cmd, *tmp_cmd; +unsigned long deadline =0 ; + +list_for_each_entry_safe (tcmu_cmd, tmp_cmd, queue, queue_entry) { +if (!time_after (jiffies, tcmu_cmd->deadline)) { + deadline = tcmu_cmd->deadline; +break ; + } + } + +if (deadline) +mod_timer (timer, deadline); +else +del_timer (timer); +} +static unsigned int tcmu_handle_completions (struct tcmu_dev *udev) {struct tcmu_mailbox *mb; +struct tcmu_cmd *cmd;int handled =0 ;if (test_bit (TCMU_DEV_BIT_BROKEN , &udev->flags)) {
@@ -1210,7 +1239,6 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)while (udev->cmdr_last_cleaned !=READ_ONCE (mb->cmd_tail)) {struct tcmu_cmd_entry *entry = (void *) mb +CMDR_OFF + udev->cmdr_last_cleaned; -struct tcmu_cmd *cmd;tcmu_flush_dcache_range (entry,sizeof (*entry));
@@ -1243,7 +1271,7 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)/* no more pending commands */ del_timer (&udev->cmd_timer); -if (list_empty (&udev->cmdr_queue)) { +if (list_empty (&udev->qfull_queue)) {/* * no more pending or waiting commands so try to * reclaim blocks if needed.
@@ -1252,6 +1280,8 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) tcmu_global_max_blocks) schedule_delayed_work(&tcmu_unmap_work, 0); } + }else if (udev->cmd_time_out) { +tcmu_set_next_deadline (&udev->inflight_queue, &udev->cmd_timer); }return handled;
@@ -1271,7 +1301,7 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data)if (!time_after (jiffies, cmd->deadline))return 0 ; - is_running =list_empty (&cmd->cmdr_queue_entry); + is_running =test_bit (TCMU_CMD_BIT_INFLIGHT , &cmd->flags); se_cmd = cmd->se_cmd;if (is_running) {
@@ -1288,12 +1318,11 @@ static int tcmu_check_expired_cmd(int id, void *p, void *data)*/ scsi_status =SAM_STAT_CHECK_CONDITION ; }else { -list_del_init (&cmd->cmdr_queue_entry); -idr_remove (&udev->commands, id);tcmu_free_cmd (cmd); scsi_status =SAM_STAT_TASK_SET_FULL ; } +list_del_init (&cmd->queue_entry);pr_debug ("Timing out cmd %u on dev %s that is %s.\n" , id, udev->name, is_running ?"inflight" :"queued" );
@@ -1372,7 +1401,8 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)INIT_LIST_HEAD (&udev->node);INIT_LIST_HEAD (&udev->timedout_entry); -INIT_LIST_HEAD (&udev->cmdr_queue); +INIT_LIST_HEAD (&udev->qfull_queue); +INIT_LIST_HEAD (&udev->inflight_queue);idr_init (&udev->commands);timer_setup (&udev->qfull_timer, tcmu_qfull_timedout,0 );
@@ -1383,7 +1413,7 @@ static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)return &udev->se_dev; } -static bool run_cmdr_queue (struct tcmu_dev *udev,bool fail) +static bool run_qfull_queue (struct tcmu_dev *udev,bool fail) {struct tcmu_cmd *tcmu_cmd, *tmp_cmd;LIST_HEAD (cmds);
@@ -1391,15 +1421,15 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)sense_reason_t scsi_ret;int ret; -if (list_empty (&udev->cmdr_queue)) +if (list_empty (&udev->qfull_queue))return true;pr_debug ("running %s's cmdr queue forcefail %d\n" , udev->name, fail); -list_splice_init (&udev->cmdr_queue, &cmds); +list_splice_init (&udev->qfull_queue, &cmds); -list_for_each_entry_safe (tcmu_cmd, tmp_cmd, &cmds, cmdr_queue_entry) { -list_del_init (&tcmu_cmd->cmdr_queue_entry); +list_for_each_entry_safe (tcmu_cmd, tmp_cmd, &cmds, queue_entry) { +list_del_init (&tcmu_cmd->queue_entry);pr_debug ("removing cmd %u on dev %s from queue\n" , tcmu_cmd->cmd_id, udev->name);
@@ -1437,14 +1467,13 @@ static bool run_cmdr_queue(struct tcmu_dev *udev, bool fail)* cmd was requeued, so just put all cmds back in * the queue */ -list_splice_tail (&cmds, &udev->cmdr_queue); +list_splice_tail (&cmds, &udev->qfull_queue); drained = false; - goto done; +break ; } } -if (list_empty (&udev->cmdr_queue)) -del_timer (&udev->qfull_timer); -done: + +tcmu_set_next_deadline (&udev->qfull_queue, &udev->qfull_timer);return drained; }
@@ -1454,7 +1483,7 @@ static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on)mutex_lock (&udev->cmdr_lock);tcmu_handle_completions (udev); -run_cmdr_queue (udev, false); +run_qfull_queue (udev, false);mutex_unlock (&udev->cmdr_lock);return 0 ;
@@ -1982,7 +2011,7 @@ static void tcmu_block_dev(struct tcmu_dev *udev)/* complete IO that has executed successfully */ tcmu_handle_completions (udev);/* fail IO waiting to be queued */ -run_cmdr_queue (udev, true); +run_qfull_queue (udev, true); unlock:mutex_unlock (&udev->cmdr_lock);
@@ -1997,7 +2026,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)mutex_lock (&udev->cmdr_lock);idr_for_each_entry (&udev->commands, cmd, i) { -if (!list_empty (&cmd->cmdr_queue_entry)) +if (!test_bit (TCMU_CMD_BIT_INFLIGHT , &cmd->flags))continue ; pr_debug("removing cmd %u on dev %s from ring (is expired %d)\n",
@@ -2006,6 +2035,7 @@ static void tcmu_reset_ring(struct tcmu_dev *udev, u8 err_level)idr_remove (&udev->commands, i);if (!test_bit (TCMU_CMD_BIT_EXPIRED , &cmd->flags)) { +list_del_init (&cmd->queue_entry);if (err_level ==1 ) {/* * Userspace was not able to start the
@@ -2666,6 +2696,10 @@ static void check_timedout_devices(void)mutex_lock (&udev->cmdr_lock);idr_for_each (&udev->commands, tcmu_check_expired_cmd,NULL ); + +tcmu_set_next_deadline (&udev->inflight_queue, &udev->cmd_timer); +tcmu_set_next_deadline (&udev->qfull_queue, &udev->qfull_timer); +mutex_unlock (&udev->cmdr_lock);spin_lock_bh (&timed_out_udevs_lock);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 78/183 scsi: ufs: Fix system suspend status
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ce9e7bce43526626f7cffe2e657953997870197e ]
hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume.
According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned.
Simply fix this flag to correct host status logs.
--- drivers/scsi/ufs/ufshcd.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/scsi/ufs/ufshcd.c +2 -0
@@ -7924,6 +7924,8 @@ int ufshcd_system_resume(struct ufs_hba *hba)trace_ufshcd_system_resume (dev_name (hba->dev), ret,ktime_to_us (ktime_sub (ktime_get (), start)), hba->curr_dev_pwr_mode, hba->uic_link_state); +if (!ret) + hba->is_sys_suspended = false;return ret; }EXPORT_SYMBOL (ufshcd_system_resume);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 79/183 scsi: qedi: Add ep_state for login completion on un-reachable targets
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 34a2ce887668db9dda4b56e6f155c49ac13f3e54 ]
When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets.
--- drivers/scsi/qedi/qedi_iscsi.c | 3 +++ drivers/scsi/qedi/qedi_iscsi.h | 1 + 2 files changed, 4 insertions(+)
drivers/scsi/qedi/qedi_iscsi.c +3 -0
@@ -954,6 +954,7 @@ static int qedi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms) qedi_ep = ep->dd_data;if (qedi_ep->state ==EP_STATE_IDLE || + qedi_ep->state ==EP_STATE_OFLDCONN_NONE || qedi_ep->state ==EP_STATE_OFLDCONN_FAILED )return -1 ;
@@ -1036,6 +1037,7 @@ static void qedi_ep_disconnect(struct iscsi_endpoint *ep)switch (qedi_ep->state) {case EP_STATE_OFLDCONN_START : +case EP_STATE_OFLDCONN_NONE : goto ep_release_conn;case EP_STATE_OFLDCONN_FAILED :break ;
@@ -1226,6 +1228,7 @@ static int qedi_set_path(struct Scsi_Host *shost, struct iscsi_path *path_data)if (!is_valid_ether_addr (&path_data->mac_addr[0 ])) {QEDI_NOTICE (&qedi->dbg_ctx,"dst mac NOT VALID\n" ); + qedi_ep->state =EP_STATE_OFLDCONN_NONE ; ret = -EIO ; goto set_path_exit; }
drivers/scsi/qedi/qedi_iscsi.h +1 -0
@@ -59,6 +59,7 @@ enum {EP_STATE_OFLDCONN_FAILED =0x2000 ,EP_STATE_CONNECT_FAILED =0x4000 ,EP_STATE_DISCONN_TIMEDOUT =0x8000 , + EP_STATE_OFLDCONN_NONE = 0x10000, };struct qedi_conn ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 80/183 scsi: ufs: Fix geometry descriptor size
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9be9db9f78f52ef03ee90063730cb9d730e7032b ]
Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0.
[mkp: typo]
--- drivers/scsi/ufs/ufs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufs.h +1 -1
@@ -195,7 +195,7 @@ enum ufs_desc_def_size {QUERY_DESC_CONFIGURATION_DEF_SIZE =0x90 ,QUERY_DESC_UNIT_DEF_SIZE =0x23 ,QUERY_DESC_INTERCONNECT_DEF_SIZE =0x06 , -QUERY_DESC_GEOMETRY_DEF_SIZE =0x44 , +QUERY_DESC_GEOMETRY_DEF_SIZE =0x48 ,QUERY_DESC_POWER_DEF_SIZE =0x62 , QUERY_DESC_HEALTH_DEF_SIZE = 0x25, };
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 81/183 scsi: qla1280: set 64bit coherent mask
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4a01ab60f55041b1ccc760e43258a5b3aeeca1bc ]
After Commit 54aed4dd3526 ("MIPS: IP27: use dma_direct_ops") qla1280 driver failed on SGI IP27 machines with
qla1280: QLA1040 found on PCI bus 0, dev 0 qla1280 0000:00:00.0: enabling device (0006 -> 0007)
qla1280: Failed to get request memory
qla1280: probe of 0000:00:00.0 failed with error -12
Reason is that SGI IP27 always generates 64bit DMA addresses and has no fallback mode for 32bit DMA addresses implemented. QLA1280 supports 64bit addressing for all DMA accesses so setting coherent mask to 64bit fixes the issue.
--- drivers/scsi/qla1280.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/qla1280.c +1 -1
@@ -4259,7 +4259,7 @@ qla1280_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) ha->devnum = devnum;/* specifies microcode load address */ #ifdef QLA_64BIT_PTR -if (dma_set_mask (&ha->pdev->dev,DMA_BIT_MASK (64 ))) { +if (dma_set_mask_and_coherent (&ha->pdev->dev,DMA_BIT_MASK (64 ))) {if (dma_set_mask (&ha->pdev->dev,DMA_BIT_MASK (32 ))) {printk (KERN_WARNING "scsi(%li): Unable to set a " "suitable DMA mask - aborting\n" , ha->host_no);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 82/183 scsi: cxgb4i: add wait_for_completion()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 9e8f1c79831424d30c0e3df068be7f4a244157c9 ]
In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion().
--- drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 9 ++++----- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 28 ++++++++++++++++++++-------- drivers/scsi/cxgbi/libcxgbi.c | 7 ++++--- drivers/scsi/cxgbi/libcxgbi.h | 5 +++-- 4 files changed, 31 insertions(+), 18 deletions(-)
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c +4 -5
@@ -1144,7 +1144,7 @@ static void ddp_clear_map(struct cxgbi_device *cdev, struct cxgbi_ppm *ppm, }static int ddp_setup_conn_pgidx (struct cxgbi_sock *csk, -unsigned int tid,int pg_idx,bool reply) +unsigned int tid,int pg_idx) {struct sk_buff *skb =alloc_wr (sizeof (struct cpl_set_tcb_field ),0 ,GFP_KERNEL );
@@ -1160,7 +1160,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, req = (struct cpl_set_tcb_field *)skb->head; req->wr.wr_hi =htonl (V_WR_OP (FW_WROPCODE_FORWARD ));OPCODE_TID (req) =htonl (MK_OPCODE_TID (CPL_SET_TCB_FIELD , tid)); - req->reply =V_NO_REPLY (reply ?0 :1 ); + req->reply =V_NO_REPLY (1 ); req->cpu_idx =0 ; req->word =htons (31 ); req->mask =cpu_to_be64 (0xF0000000 );
@@ -1177,11 +1177,10 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,* @tid: connection id * @hcrc: header digest enabled * @dcrc: data digest enabled -* @reply: request reply from h/w * set up the iscsi digest settings for a connection identified by tid */ static int ddp_setup_conn_digest (struct cxgbi_sock *csk,unsigned int tid, -int hcrc,int dcrc,int reply) +int hcrc,int dcrc) {struct sk_buff *skb =alloc_wr (sizeof (struct cpl_set_tcb_field ),0 ,GFP_KERNEL );
@@ -1197,7 +1196,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, req = (struct cpl_set_tcb_field *)skb->head; req->wr.wr_hi =htonl (V_WR_OP (FW_WROPCODE_FORWARD ));OPCODE_TID (req) =htonl (MK_OPCODE_TID (CPL_SET_TCB_FIELD , tid)); - req->reply =V_NO_REPLY (reply ?0 :1 ); + req->reply =V_NO_REPLY (1 ); req->cpu_idx =0 ; req->word =htons (31 ); req->mask =cpu_to_be64 (0x0F000000 );
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +20 -8
@@ -1548,16 +1548,22 @@ static void do_set_tcb_rpl(struct cxgbi_device *cdev, struct sk_buff *skb)struct cxgbi_sock *csk; csk =lookup_tid (t, tid); -if (!csk) +if (!csk) {pr_err ("can't find conn. for tid %u.\n" , tid); +return ; + }log_debug (1 <<CXGBI_DBG_TOE |1 <<CXGBI_DBG_SOCK ,"csk 0x%p,%u,%lx,%u, status 0x%x.\n" , csk, csk->state, csk->flags, csk->tid, rpl->status); -if (rpl->status !=CPL_ERR_NONE ) +if (rpl->status !=CPL_ERR_NONE ) {pr_err ("csk 0x%p,%u, SET_TCB_RPL status %u.\n" , csk, tid, rpl->status); + csk->err = -EINVAL ; + } + +complete (&csk->cmpl);__kfree_skb (skb); }
@@ -1984,7 +1990,7 @@ static int ddp_set_map(struct cxgbi_ppm *ppm, struct cxgbi_sock *csk, }static int ddp_setup_conn_pgidx (struct cxgbi_sock *csk,unsigned int tid, -int pg_idx,bool reply) +int pg_idx) {struct sk_buff *skb;struct cpl_set_tcb_field *req;
@@ -2000,7 +2006,7 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid, req = (struct cpl_set_tcb_field *)skb->head;INIT_TP_WR (req, csk->tid);OPCODE_TID (req) =htonl (MK_OPCODE_TID (CPL_SET_TCB_FIELD , csk->tid)); - req->reply_ctrl =htons (NO_REPLY_V (reply) |QUEUENO_V (csk->rss_qid)); + req->reply_ctrl =htons (NO_REPLY_V (0 ) |QUEUENO_V (csk->rss_qid)); req->word_cookie =htons (0 ); req->mask =cpu_to_be64 (0x3 <<8 ); req->val =cpu_to_be64 (pg_idx <<8 );
@@ -2009,12 +2015,15 @@ static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk, unsigned int tid,log_debug (1 <<CXGBI_DBG_TOE |1 <<CXGBI_DBG_SOCK ,"csk 0x%p, tid 0x%x, pg_idx %u.\n" , csk, csk->tid, pg_idx); +reinit_completion (&csk->cmpl);cxgb4_ofld_send (csk->cdev->ports[csk->port_id], skb); -return 0 ; +wait_for_completion (&csk->cmpl); + +return csk->err; }static int ddp_setup_conn_digest (struct cxgbi_sock *csk,unsigned int tid, -int hcrc,int dcrc,int reply) +int hcrc,int dcrc) {struct sk_buff *skb;struct cpl_set_tcb_field *req;
@@ -2032,7 +2041,7 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid, req = (struct cpl_set_tcb_field *)skb->head;INIT_TP_WR (req, tid);OPCODE_TID (req) =htonl (MK_OPCODE_TID (CPL_SET_TCB_FIELD , tid)); - req->reply_ctrl =htons (NO_REPLY_V (reply) |QUEUENO_V (csk->rss_qid)); + req->reply_ctrl =htons (NO_REPLY_V (0 ) |QUEUENO_V (csk->rss_qid)); req->word_cookie =htons (0 ); req->mask =cpu_to_be64 (0x3 <<4 ); req->val = cpu_to_be64(((hcrc ? ULP_CRC_HEADER : 0) |
@@ -2042,8 +2051,11 @@ static int ddp_setup_conn_digest(struct cxgbi_sock *csk, unsigned int tid,log_debug (1 <<CXGBI_DBG_TOE |1 <<CXGBI_DBG_SOCK ,"csk 0x%p, tid 0x%x, crc %d,%d.\n" , csk, csk->tid, hcrc, dcrc); +reinit_completion (&csk->cmpl);cxgb4_ofld_send (csk->cdev->ports[csk->port_id], skb); -return 0 ; +wait_for_completion (&csk->cmpl); + +return csk->err; }static struct cxgbi_ppm *cdev2ppm (struct cxgbi_device *cdev)
drivers/scsi/cxgbi/libcxgbi.c +4 -3
@@ -573,6 +573,7 @@ static struct cxgbi_sock *cxgbi_sock_create(struct cxgbi_device *cdev)skb_queue_head_init (&csk->receive_queue);skb_queue_head_init (&csk->write_queue);timer_setup (&csk->retry_timer,NULL ,0 ); +init_completion (&csk->cmpl);rwlock_init (&csk->callback_lock); csk->cdev = cdev; csk->flags =0 ;
@@ -2251,14 +2252,14 @@ int cxgbi_set_conn_param(struct iscsi_cls_conn *cls_conn,if (!err && conn->hdrdgst_en) err = csk->cdev->csk_ddp_setup_digest (csk, csk->tid, conn->hdrdgst_en, - conn->datadgst_en,0 ); + conn->datadgst_en);break ;case ISCSI_PARAM_DATADGST_EN : err =iscsi_set_param (cls_conn, param, buf, buflen);if (!err && conn->datadgst_en) err = csk->cdev->csk_ddp_setup_digest (csk, csk->tid, conn->hdrdgst_en, - conn->datadgst_en,0 ); + conn->datadgst_en);break ;case ISCSI_PARAM_MAX_R2T :return iscsi_tcp_set_max_r2t (conn, buf);
@@ -2384,7 +2385,7 @@ int cxgbi_bind_conn(struct iscsi_cls_session *cls_session, ppm = csk->cdev->cdev2ppm (csk->cdev); err = csk->cdev->csk_ddp_setup_pgidx (csk, csk->tid, - ppm->tformat.pgsz_idx_dflt,0 ); + ppm->tformat.pgsz_idx_dflt);if (err <0 )return err;
drivers/scsi/cxgbi/libcxgbi.h +3 -2
@@ -149,6 +149,7 @@ struct cxgbi_sock {struct sk_buff_head receive_queue;struct sk_buff_head write_queue;struct timer_list retry_timer; +struct completion cmpl;int err;rwlock_t callback_lock;void *user_data;
@@ -490,9 +491,9 @@ struct cxgbi_device { struct cxgbi_ppm *, struct cxgbi_task_tag_info *);int (*csk_ddp_setup_digest)(struct cxgbi_sock *, -unsigned int ,int ,int ,int ); +unsigned int ,int ,int );int (*csk_ddp_setup_pgidx)(struct cxgbi_sock *, -unsigned int ,int ,bool ); +unsigned int ,int );void (*csk_release_offload_resources)(struct cxgbi_sock *);int (*csk_rx_pdu_ready)(struct cxgbi_sock *,struct sk_buff *);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 83/183 netfilter: nft_flow_offload: fix checking method of conntrack helper
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 2314e879747e82896f51cce4488f6a00f3e1af7b ]
This patch uses nfct_help() to detect whether an established connection needs conntrack helper instead of using test_bit(IPS_HELPER_BIT, &ct->status).
The reason is that IPS_HELPER_BIT is only set when using explicit CT target.
However, in the case that a device enables conntrack helper via command "echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of IPS_HELPER_BIT will not present any change, and consequently it loses the checking ability in the context.
--- net/netfilter/nft_flow_offload.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
net/netfilter/nft_flow_offload.c +4 -1
@@ -12,6 +12,7 @@#include <net/netfilter/nf_conntrack_core.h> #include <linux/netfilter/nf_conntrack_common.h> #include <net/netfilter/nf_flow_table.h> +#include <net/netfilter/nf_conntrack_helper.h> struct nft_flow_offload {struct nft_flowtable *flowtable;
@@ -66,6 +67,7 @@ static void nft_flow_offload_eval(const struct nft_expr *expr, {struct nft_flow_offload *priv =nft_expr_priv (expr);struct nf_flowtable *flowtable = &priv->flowtable->data; +const struct nf_conn_help *help;enum ip_conntrack_info ctinfo;struct nf_flow_route route;struct flow_offload *flow;
@@ -88,7 +90,8 @@ static void nft_flow_offload_eval(const struct nft_expr *expr, goto out; } -if (test_bit (IPS_HELPER_BIT , &ct->status)) + help =nfct_help (ct); +if (help) goto out; if (ctinfo == IP_CT_NEW ||
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 84/183 always clear the X2APIC_ENABLE bit for PV guest
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5268c8f39e0efef81af2aaed160272d9eb507beb ]
Commit e657fcc clears cpu capability bit instead of using fake cpuid value, the EXTD should always be off for PV guest without depending on cpuid value. So remove the cpuid check in xen_read_msr_safe() to always clear the X2APIC_ENABLE bit.
--- arch/x86/xen/enlighten_pv.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
arch/x86/xen/enlighten_pv.c +1 -4
@@ -898,10 +898,7 @@ static u64 xen_read_msr_safe(unsigned int msr, int *err) val =native_read_msr_safe (msr, err);switch (msr) {case MSR_IA32_APICBASE : -#ifdef CONFIG_X86_X2APIC - if (!(cpuid_ecx(1) & (1 << (X86_FEATURE_X2APIC & 31)))) -#endif - val &= ~X2APIC_ENABLE ; + val &= ~X2APIC_ENABLE ;break ; }return val;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 85/183 drm/meson: add missing of_node_put
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f672b93e4a0a4947d2e1103ed8780e01e13eadb6 ]
Add an of_node_put when the result of of_graph_get_remote_port_parent is not available.
An of_node_put is also needed when meson_probe_remote completes. This was present at the recursive call, but not in the call from meson_drv_probe.
The semantic match that finds this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@r exists@
local idexpression e;
expression x;
@@
e = of_graph_get_remote_port_parent(...);
... when != x = e
when != true e == NULL
when != of_node_put(e)
when != of_fwnode_handle(e)(
return e;
|
*return ...;
)
// </smpl>
--- drivers/gpu/drm/meson/meson_drv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/gpu/drm/meson/meson_drv.c +7 -2
@@ -368,8 +368,10 @@ static int meson_probe_remote(struct platform_device *pdev, remote_node =of_graph_get_remote_port_parent (ep);if (!remote_node || remote_node == parent ||/* Ignore parent endpoint */ - !of_device_is_available (remote_node)) + !of_device_is_available (remote_node)) { +of_node_put (remote_node);continue ; + } count +=meson_probe_remote (pdev, match, remote, remote_node);
@@ -388,10 +390,13 @@ static int meson_drv_probe(struct platform_device *pdev)for_each_endpoint_of_node (np, ep) { remote =of_graph_get_remote_port_parent (ep); -if (!remote || !of_device_is_available (remote)) +if (!remote || !of_device_is_available (remote)) { +of_node_put (remote);continue ; + } count +=meson_probe_remote (pdev, &match, np, remote); +of_node_put (remote); }if (count && !match)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 86/183 drm/amdkfd: Dont assign dGPUs to APU topology devices
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit bbdf514fe5648566b0754476cbcb92ac3422dde2 ]
dGPUs need their own topology devices. Don't assign them to APU topology devices with CPU cores.
--- drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/gpu/drm/amd/amdkfd/kfd_topology.c +9 -3
@@ -1074,8 +1074,6 @@ static uint32_t kfd_generate_gpu_id(struct kfd_dev *gpu)* the GPU device is not already present in the topology device * list then return NULL. This means a new topology device has to * be created for this GPU. -* TODO: Rather than assiging @gpu to first topology device withtout -* gpu attached, it will better to have more stringent check. */ static struct kfd_topology_device *kfd_assign_gpu (struct kfd_dev *gpu) {
@@ -1083,12 +1081,20 @@ static struct kfd_topology_device *kfd_assign_gpu(struct kfd_dev *gpu)struct kfd_topology_device *out_dev =NULL ;down_write (&topology_lock); -list_for_each_entry (dev, &topology_device_list, list) +list_for_each_entry (dev, &topology_device_list, list) { +/* Discrete GPUs need their own topology device list +* entries. Don't assign them to CPU/APU nodes. +*/ +if (!gpu->device_info->needs_iommu_device && + dev->node_props.cpu_cores_count) +continue ; +if (!dev->gpu && (dev->node_props.simd_count >0 )) { dev->gpu = gpu; out_dev = dev;break ; } + }up_write (&topology_lock);return out_dev; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 87/183 drm/amd/display: fix PME notification not working in RV desktop
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 20300db4aec5ba5edf6f0ad6f7111a51fbea7e10 ]
[Why]
PPLIB not receive the PME when unplug.
--- .../gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +6 -1
@@ -1000,7 +1000,7 @@ void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx) pipe_ctx->stream_res.audio->funcs->az_enable (pipe_ctx->stream_res.audio); -if (num_audio ==1 && pp_smu !=NULL && pp_smu->set_pme_wa_enable !=NULL ) +if (num_audio >=1 && pp_smu !=NULL && pp_smu->set_pme_wa_enable !=NULL )/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/ pp_smu->set_pme_wa_enable (&pp_smu->pp_smu);/* un-mute audio */
@@ -1017,6 +1017,8 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option) pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control ( pipe_ctx->stream_res.stream_enc, true);if (pipe_ctx->stream_res.audio) { +struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu; +if (option !=KEEP_ACQUIRED_RESOURCE || !dc->debug.az_endpoint_mute_only) {/*only disalbe az_endpoint if power down or free*/
@@ -1036,6 +1038,9 @@ void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)update_audio_usage (&dc->current_state->res_ctx, dc->res_pool, pipe_ctx->stream_res.audio, false); pipe_ctx->stream_res.audio =NULL ; } +if (pp_smu !=NULL && pp_smu->set_pme_wa_enable !=NULL ) +/*this is the first audio. apply the PME w/a in order to wake AZ from D3*/ + pp_smu->set_pme_wa_enable (&pp_smu->pp_smu);/* TODO: notify audio driver for if audio modes list changed * add audio mode list change flag */
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 88/183 vhost: return EINVAL if iovecs size does not match the message size
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 74ad7419489ddade8044e3c9ab064ad656520306 ]
We've failed to copy and process vhost_iotlb_msg so let userspace at least know about it. For instance before these patch the code below runs without any error:
int main()
{
struct vhost_msg msg;
struct iovec iov;
int fd;
fd = open("/dev/vhost-net", O_RDWR);
if (fd == -1) {
perror("open");
return 1;
}
iov.iov_base = &msg;
iov.iov_len = sizeof(msg)-4;
if (writev(fd, &iov,1) == -1) {
perror("writev");
return 1;
} return 0;
}
--- drivers/vhost/vhost.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/vhost/vhost.c +6 -2
@@ -1035,8 +1035,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,int type, ret; ret =copy_from_iter (&type,sizeof (type), from); -if (ret !=sizeof (type)) +if (ret !=sizeof (type)) { + ret = -EINVAL ; goto done; + }switch (type) {case VHOST_IOTLB_MSG :
@@ -1055,8 +1057,10 @@ ssize_t vhost_chr_write_iter(struct vhost_dev *dev,iov_iter_advance (from, offset); ret =copy_from_iter (&msg,sizeof (msg), from); -if (ret !=sizeof (msg)) +if (ret !=sizeof (msg)) { + ret = -EINVAL ; goto done; + }if (vhost_process_iotlb_msg (dev, &msg)) { ret = -EFAULT ; goto done;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 89/183 vhost/scsi: Use copy_to_iter() to send control queue response
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 8e5dadfe76cf2862ebf3e4f22adef29982df7766 ]
Uses copy_to_iter() instead of __copy_to_user() in order to ensure we support arbitrary layouts and an input buffer split across iov entries.
--- drivers/vhost/scsi.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/vhost/scsi.c +12 -8
@@ -1132,16 +1132,18 @@ vhost_scsi_send_tmf_reject(struct vhost_scsi *vs,struct vhost_virtqueue *vq, struct vhost_scsi_ctx *vc) { - struct virtio_scsi_ctrl_tmf_resp __user *resp; struct virtio_scsi_ctrl_tmf_resp rsp; +struct iov_iter iov_iter;int ret;pr_debug ("%s\n" , __func__);memset (&rsp,0 ,sizeof (rsp)); rsp.response =VIRTIO_SCSI_S_FUNCTION_REJECTED ; - resp = vq->iov[vc->out].iov_base; - ret =__copy_to_user (resp, &rsp,sizeof (rsp)); -if (!ret) + +iov_iter_init (&iov_iter,READ , &vq->iov[vc->out], vc->in,sizeof (rsp)); + + ret =copy_to_iter (&rsp,sizeof (rsp), &iov_iter); +if (likely (ret ==sizeof (rsp)))vhost_add_used_and_signal (&vs->dev, vq, vc->head,0 );else pr_err ("Faulted on virtio_scsi_ctrl_tmf_resp\n" );
@@ -1152,16 +1154,18 @@ vhost_scsi_send_an_resp(struct vhost_scsi *vs,struct vhost_virtqueue *vq, struct vhost_scsi_ctx *vc) { - struct virtio_scsi_ctrl_an_resp __user *resp; struct virtio_scsi_ctrl_an_resp rsp; +struct iov_iter iov_iter;int ret;pr_debug ("%s\n" , __func__);memset (&rsp,0 ,sizeof (rsp));/* event_actual = 0 */ rsp.response =VIRTIO_SCSI_S_OK ; - resp = vq->iov[vc->out].iov_base; - ret =__copy_to_user (resp, &rsp,sizeof (rsp)); -if (!ret) + +iov_iter_init (&iov_iter,READ , &vq->iov[vc->out], vc->in,sizeof (rsp)); + + ret =copy_to_iter (&rsp,sizeof (rsp), &iov_iter); +if (likely (ret ==sizeof (rsp)))vhost_add_used_and_signal (&vs->dev, vq, vc->head,0 );else pr_err ("Faulted on virtio_scsi_ctrl_an_resp\n" );
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 90/183 xsk: Check if a queue exists during umem setup
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cc5b5d3565048ae57d14e5674a5fb085b2ab0193 ]
In the xdp_umem_assign_dev() path, the xsk code does not check if a queue for which umem is to be created exists. It leads to a situation where umem is not assigned to any Tx/Rx queue of a netdevice, without notifying the stack about an error. This affects both XDP_SKB and XDP_DRV modes - in case of XDP_DRV_ZC, queue index is checked by the driver.
This patch fixes xsk code, so that in both XDP_SKB and XDP_DRV mode of AF_XDP, an error is returned when requested queue index exceedes an existing maximum.
--- net/xdp/xdp_umem.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
net/xdp/xdp_umem.c +13 -3
@@ -41,13 +41,20 @@ void xdp_del_sk_umem(struct xdp_umem *umem, struct xdp_sock *xs)* not know if the device has more tx queues than rx, or the opposite. * This might also change during run time. */ -static void xdp_reg_umem_at_qid (struct net_device *dev,struct xdp_umem *umem, -u16 queue_id) +static int xdp_reg_umem_at_qid (struct net_device *dev,struct xdp_umem *umem, +u16 queue_id) { + if (queue_id >= max_t(unsigned int, + dev->real_num_rx_queues, + dev->real_num_tx_queues)) +return -EINVAL ; +if (queue_id < dev->real_num_rx_queues) dev->_rx[queue_id].umem = umem;if (queue_id < dev->real_num_tx_queues) dev->_tx[queue_id].umem = umem; + +return 0 ; } struct xdp_umem *xdp_get_umem_from_qid(struct net_device *dev,
@@ -88,7 +95,10 @@ int xdp_umem_assign_dev(struct xdp_umem *umem, struct net_device *dev, goto out_rtnl_unlock; } -xdp_reg_umem_at_qid (dev, umem, queue_id); + err =xdp_reg_umem_at_qid (dev, umem, queue_id); +if (err) + goto out_rtnl_unlock; + umem->dev = dev; umem->queue_id = queue_id;if (force_copy)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 91/183 selftests/bpf: install with_tunnels.sh for test_flow_dissector.sh
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1be72f29bfb98be27a95309f18b4ab5249967b59 ]
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh However, we install only with_addr.sh.
Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets installed as well.
Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x
--- tools/testing/selftests/bpf/Makefile | 1 + 1 file changed, 1 insertion(+)
tools/testing/selftests/bpf/Makefile +1 -0
@@ -54,6 +54,7 @@ TEST_PROGS := test_kmod.sh \ test_xdp_vlan.sh TEST_PROGS_EXTENDED := with_addr.sh \ + with_tunnels.sh \ tcp_client.py \ tcp_server.py
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 92/183 samples/bpf: workaround clang asm goto compilation errors
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 6bf3bbe1f4d4cf405e3c2bf07bbdff56d3223ec8 ]
x86 compilation has required asm goto support since 4.17. Since clang does not support asm goto, at 4.17,
Commit b1ae32dbab50 ("x86/cpufeature: Guard asm_volatile_goto usage for BPF compilation") worked around the issue by permitting an alternative implementation without asm goto for clang.
At 5.0, more asm goto usages appeared.
[yhs@148 x86]$ egrep -r asm_volatile_goto
include/asm/cpufeature.h: asm_volatile_goto("1: jmp 6f\n"
include/asm/jump_label.h: asm_volatile_goto("1:"
include/asm/jump_label.h: asm_volatile_goto("1:"
include/asm/rmwcc.h: asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \
include/asm/uaccess.h: asm_volatile_goto("\n" \
include/asm/uaccess.h: asm_volatile_goto("\n" \[yhs@148 x86]$
Compiling samples/bpf directories, most bpf programs failed
compilation with error messages like:
In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2:
In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6:
In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15:
In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5:
In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5:
In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9:
In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72:
/home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet
return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl",
^
/home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc'
__GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc, \
^
/home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc'
asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \
^ /home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto' #define asm_volatile_goto(x...) asm goto(x)
Most implementation does not even provide an alternative implementation. And it is also not practical to make changes for each call site.
This patch workarounded the asm goto issue by redefining the macro like below:
#define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto")
If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes.
With this patch, all bpf programs under samples/bpf can pass compilation.
Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as they do not access kernel internal headers.
--- samples/bpf/Makefile | 1 + samples/bpf/asm_goto_workaround.h | 16 ++++++++++++++++ 2 files changed, 17 insertions(+) create mode 100644 samples/bpf/asm_goto_workaround.h
samples/bpf/Makefile +1 -0
@@ -273,6 +273,7 @@ $(obj)/%.o: $(src)/%.c -Wno-gnu-variable-sized-type-not-at-end \ -Wno-address-of-packed-member -Wno-tautological-compare \ -Wno-unknown-warning-option $(CLANG_ARCH_ARGS) \ + -I$(srctree)/samples/bpf/ -include asm_goto_workaround.h \ -O2 -emit-llvm -c $< -o -| $(LLC) -march=bpf $(LLC_FLAGS) -filetype=obj -o $@ ifeq ($(DWARF2BTF),y) $(BTF_PAHOLE) -J $@
samples/bpf/asm_goto_workaround.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2019 Facebook */ +#ifndef __ASM_GOTO_WORKAROUND_H +#define __ASM_GOTO_WORKAROUND_H + +/* this will bring in asm_volatile_goto macro definition +* if enabled by compiler and config options. +*/ +#include <linux/types.h> + +#ifdef asm_volatile_goto +#undef asm_volatile_goto +#define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto") +#endif + +#endif
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 93/183 SUNRPC: Ensure rq_bytes_sent is reset before request transmission
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e66721f0436396f779291a29616858b76bfd9415 ]
When we resend a request, ensure that the 'rq_bytes_sent' is reset to zero.
--- net/sunrpc/clnt.c | 1 - net/sunrpc/xprt.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-)
net/sunrpc/clnt.c +0 -1
@@ -1738,7 +1738,6 @@ rpc_xdr_encode(struct rpc_task *task)xdr_buf_init (&req->rq_rcv_buf, req->rq_rbuffer, req->rq_rcvsize); - req->rq_bytes_sent =0 ; p =rpc_encode_header (task);if (p ==NULL ) {
net/sunrpc/xprt.c +1 -0
@@ -1151,6 +1151,7 @@ xprt_request_enqueue_transmit(struct rpc_task *task)struct rpc_xprt *xprt = req->rq_xprt;if (xprt_request_need_enqueue_transmit (task, req)) { + req->rq_bytes_sent =0 ;spin_lock (&xprt->queue_lock);/* * Requests that carry congestion control credits are added
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 94/183 SUNRPC: Ensure we respect the RPCSEC_GSS sequence number limit
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 97b78ae96ba76f4ca2d8f5afee6a2e567ccb8f45 ]
According to RFC2203, the RPCSEC_GSS sequence numbers are bounded to an upper limit of MAXSEQ = 0x80000000. Ensure that we handle that correctly.
--- net/sunrpc/auth_gss/auth_gss.c | 12 +++++++++--- net/sunrpc/clnt.c | 19 ++++++++++++------- 2 files changed, 21 insertions(+), 10 deletions(-)
net/sunrpc/auth_gss/auth_gss.c +9 -3
@@ -1563,8 +1563,10 @@ gss_marshal(struct rpc_task *task, __be32 *p) cred_len = p++;spin_lock (&ctx->gc_seq_lock); - req->rq_seqno = ctx->gc_seq++; + req->rq_seqno = (ctx->gc_seq <MAXSEQ ) ? ctx->gc_seq++ :MAXSEQ ;spin_unlock (&ctx->gc_seq_lock); +if (req->rq_seqno ==MAXSEQ ) + goto out_expired; *p++ =htonl ((u32 )RPC_GSS_VERSION ); *p++ =htonl ((u32 ) ctx->gc_proc);
@@ -1586,14 +1588,18 @@ gss_marshal(struct rpc_task *task, __be32 *p) mic.data = (u8 *)(p +1 ); maj_stat =gss_get_mic (ctx->gc_gss_ctx, &verf_buf, &mic);if (maj_stat ==GSS_S_CONTEXT_EXPIRED ) { -clear_bit (RPCAUTH_CRED_UPTODATE , &cred->cr_flags); + goto out_expired; }else if (maj_stat !=0 ) { -printk ("gss_marshal: gss_get_mic FAILED (%d)\n" , maj_stat); +pr_warn ("gss_marshal: gss_get_mic FAILED (%d)\n" , maj_stat); + task->tk_status = -EIO ; goto out_put_ctx; } p =xdr_encode_opaque (p,NULL , mic.len);gss_put_ctx (ctx);return p; +out_expired: +clear_bit (RPCAUTH_CRED_UPTODATE , &cred->cr_flags); + task->tk_status = -EKEYEXPIRED ; out_put_ctx:gss_put_ctx (ctx);return NULL ;
net/sunrpc/clnt.c +12 -7
@@ -1740,11 +1740,8 @@ rpc_xdr_encode(struct rpc_task *task) req->rq_rcvsize); p =rpc_encode_header (task); -if (p ==NULL ) { -printk (KERN_INFO "RPC: couldn't encode RPC header, exit EIO\n" ); -rpc_exit (task, -EIO ); +if (p ==NULL )return ; - } encode = task->tk_msg.rpc_proc->p_encode;if (encode ==NULL )
@@ -1769,10 +1766,17 @@ call_encode(struct rpc_task *task)/* Did the encode result in an error condition? */ if (task->tk_status !=0 ) {/* Was the error nonfatal? */ -if (task->tk_status == -EAGAIN || task->tk_status == -ENOMEM ) +switch (task->tk_status) { +case -EAGAIN : +case -ENOMEM :rpc_delay (task,HZ >>4 ); -else +break ; +case -EKEYEXPIRED : + task->tk_action = call_refresh; +break ; +default :rpc_exit (task, task->tk_status); + }return ; }
@@ -2334,7 +2338,8 @@ rpc_encode_header(struct rpc_task *task) *p++ =htonl (clnt->cl_vers);/* program version */ *p++ =htonl (task->tk_msg.rpc_proc->p_proc);/* procedure */ p =rpcauth_marshcred (task, p); - req->rq_slen =xdr_adjust_iovec (&req->rq_svec[0 ], p); +if (p) + req->rq_slen =xdr_adjust_iovec (&req->rq_svec[0 ], p);return p; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 95/183 drm/sun4i: backend: add missing of_node_puts
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4bb0e6d7258213d4893c2c876712fbba40e712fe ]
The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put.
Remote and port also have augmented reference counts, so drop them on each iteration and at the end of the function, respectively. Remote is only used for the address it contains, not for the contents of that address, so the reference count can be dropped immediately.
The semantic patch that fixes the first part of this problem is as follows (http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_available_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
+ of_node_put(child);
? break;
...
}
... when != child
// </smpl>
--- drivers/gpu/drm/sun4i/sun4i_backend.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/gpu/drm/sun4i/sun4i_backend.c +3 -2
@@ -704,17 +704,18 @@ static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv, remote =of_graph_get_remote_port_parent (ep);if (!remote)continue ; +of_node_put (remote);/* does this node match any registered engines? */ list_for_each_entry (frontend, &drv->frontend_list, list) {if (remote == frontend->node) { -of_node_put (remote);of_node_put (port); +of_node_put (ep);return frontend; } } } - +of_node_put (port);return ERR_PTR (-EINVAL ); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 96/183 pvcalls-front: fix potential null dereference
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b4711098066f1cf808d4dc11a1a842860a3292fe ]
static checker warning:
drivers/xen/pvcalls-front.c:373 alloc_active_ring()
error: we previously assumed 'map->active.ring' could be null
(see line 357)drivers/xen/pvcalls-front.c
351 static int alloc_active_ring(struct sock_mapping *map)
352 {
353 void *bytes;
354
355 map->active.ring = (struct pvcalls_data_intf *)
356 get_zeroed_page(GFP_KERNEL);
357 if (!map->active.ring)
^^^^^^^^^^^^^^^^^Check
358 goto out;
359
360 map->active.ring->ring_order = PVCALLS_RING_ORDER;
361 bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
362 PVCALLS_RING_ORDER);
363 if (!bytes)
364 goto out;
365
366 map->active.data.in = bytes;
367 map->active.data.out = bytes +
368 XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
369
370 return 0;
371
372 out:
--> 373 free_active_ring(map);
^^^Add null check on map->active.ring before dereferencing it to avoid any NULL pointer dereferences.
--- drivers/xen/pvcalls-front.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/xen/pvcalls-front.c +3 -0
@@ -343,6 +343,9 @@ int pvcalls_front_socket(struct socket *sock)static void free_active_ring (struct sock_mapping *map) { +if (!map->active.ring) +return ; +free_pages ((unsigned long )map->active.data.in, map->active.ring->ring_order);free_page ((unsigned long )map->active.ring);
Signature · 9 lines
2.19.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Greg Kroah-Hartman
maintainerPATCH 96/183 pvcalls-front: fix potential null dereference
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b4711098066f1cf808d4dc11a1a842860a3292fe ]
static checker warning:
drivers/xen/pvcalls-front.c:373 alloc_active_ring()
error: we previously assumed 'map->active.ring' could be null
(see line 357)drivers/xen/pvcalls-front.c
351 static int alloc_active_ring(struct sock_mapping *map)
352 {
353 void *bytes;
354
355 map->active.ring = (struct pvcalls_data_intf *)
356 get_zeroed_page(GFP_KERNEL);
357 if (!map->active.ring)
^^^^^^^^^^^^^^^^^Check
358 goto out;
359
360 map->active.ring->ring_order = PVCALLS_RING_ORDER;
361 bytes = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
362 PVCALLS_RING_ORDER);
363 if (!bytes)
364 goto out;
365
366 map->active.data.in = bytes;
367 map->active.data.out = bytes +
368 XEN_FLEX_RING_SIZE(PVCALLS_RING_ORDER);
369
370 return 0;
371
372 out:
--> 373 free_active_ring(map);
^^^Add null check on map->active.ring before dereferencing it to avoid any NULL pointer dereferences.
--- drivers/xen/pvcalls-front.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/xen/pvcalls-front.c +3 -0
@@ -343,6 +343,9 @@ int pvcalls_front_socket(struct socket *sock)static void free_active_ring (struct sock_mapping *map) { +if (!map->active.ring) +return ; +free_pages ((unsigned long )map->active.data.in, map->active.ring->ring_order);free_page ((unsigned long )map->active.ring);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 97/183 ACPI: EC: Look for ECDT EC after calling acpi_load_tables()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit b1c0330823fe842dbb34641f1410f0afa51c29d3 ]
Some systems have had functional issues since commit 5a8361f7ecce (ACPICA: Integrate package handling with module-level code) that, among other things, changed the initial values of the acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to be called before acpi_load_tables() on the vast majority of platforms.
Namely, before commit 5a8361f7ecce, acpi_load_tables() was called from acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and acpi_gbl_group_module_level_code was TRUE, which almost always was the case as FALSE and TRUE were their initial values, respectively. The acpi_gbl_parse_table_as_term_list value would be changed to TRUE for a couple of platforms in acpi_quirks_dmi_table[], but it remained FALSE in the vast majority of cases.
After commit 5a8361f7ecce, the initial values of the two flags have been reversed, so in effect acpi_load_tables() has not been called from acpi_early_init() any more. That, in turn, affects acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now and it is not possible to evaluate the _REG method for the EC address space handler installed by it. That effectively causes the EC address space to be inaccessible to AML on platforms with an ECDT matching the EC device definition in the DSDT and functional problems ensue in there.
Because the default behavior before commit 5a8361f7ecce was to call acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to do that again. Moreover, the EC address space handler installed by acpi_ec_ecdt_probe() is only needed for AML to be able to access the EC address space and the only AML that can run during acpi_load_tables() is module-level code which only is allowed to access address spaces with default handlers (memory, I/O and PCI config space).
For this reason, move the acpi_ec_ecdt_probe() invocation back to acpi_bus_init(), from where it was taken away by commit d737f333b211 (ACPI: probe ECDT before loading AML tables regardless of module-level code flag), and put it after the invocation of acpi_load_tables() to restore the original code ordering from before commit 5a8361f7ecce.
--- drivers/acpi/bus.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/acpi/bus.c +12 -12
@@ -1054,18 +1054,6 @@ void __init acpi_early_init(void) goto error0; } -/* -* ACPI 2.0 requires the EC driver to be loaded and work before -* the EC device is found in the namespace (i.e. before -* acpi_load_tables() is called). -* -* This is accomplished by looking for the ECDT table, and getting -* the EC parameters out of that. -* -* Ignore the result. Not having an ECDT is not fatal. -*/ - status =acpi_ec_ecdt_probe (); -#ifdef CONFIG_X86 if (!acpi_ioapic) {/* compatible (0) means level (3) */
@@ -1142,6 +1130,18 @@ static int __init acpi_bus_init(void) goto error1; } +/* +* ACPI 2.0 requires the EC driver to be loaded and work before the EC +* device is found in the namespace. +* +* This is accomplished by looking for the ECDT table and getting the EC +* parameters out of that. +* +* Do that before calling acpi_initialize_objects() which may trigger EC +* address space accesses. +*/ +acpi_ec_ecdt_probe (); + status =acpi_enable_subsystem (ACPI_NO_ACPI_ENABLE );if (ACPI_FAILURE (status)) { printk(KERN_ERR PREFIX
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 98/183 net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 1d16073a326891c2a964e4cb95bc18fbcafb5f74 ]
So far genphy_soft_reset was used automatically if the PHY driver didn't implement the soft_reset callback. This changed with the mentioned commit and broke KSZ9031. To fix this configure the KSZ9031 PHY driver to use genphy_soft_reset.
--- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/phy/micrel.c +1 -0
@@ -1076,6 +1076,7 @@ static struct phy_driver ksphy_driver[] = { .driver_data = &ksz9021_type, .probe = kszphy_probe, .config_init = ksz9031_config_init, + .soft_reset = genphy_soft_reset, .read_status = ksz9031_read_status, .ack_interrupt = kszphy_ack_interrupt, .config_intr = kszphy_config_intr,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 99/183 selftests: tc-testing: drop test on missing tunnel key id
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e413615502a3324daba038f529932ba9a5248af0 ]
After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow key-less tunnels"), act_tunnel_key does not reject anymore requests to install 'set' rules where the key id is missing. Therefore, drop the following TDC testcase:
ba4e - Add tunnel_key set action with missing mandatory id parameter
because it's going to become a systematic fail as soon as userspace iproute2 will start supporting key-less tunnels.
--- .../tc-tests/actions/tunnel_key.json | 29 ------------------- 1 file changed, 29 deletions(-)
tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +0 -29
@@ -81,35 +81,6 @@ ] ] }, - { - "id": "ba4e", - "name": "Add tunnel_key set action with missing mandatory id parameter", - "category": [ - "actions", - "tunnel_key" - ], - "setup": [ - [ - "$TC actions flush action tunnel_key", - 0, - 1, - 255 - ] - ], - "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2", - "expExitCode": "255", - "verifyCmd": "$TC actions list action tunnel_key", - "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 10.10.10.1.*dst_ip 20.20.20.2", - "matchCount": "0", - "teardown": [ - [ - "$TC actions flush action tunnel_key", - 0, - 1, - 255 - ] - ] - }, { "id": "a5e0", "name": "Add tunnel_key set action with invalid src_ip parameter",
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 100/183 selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 5216bd77798e2ed773ecd45f3f368dcaec63e5dd ]
After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port if it wasn't set"), act_tunnel_key doesn't dump anymore the destination port, unless it was explicitly configured. This caused systematic failures in the following TDC test case:
7a88 - Add tunnel_key action with cookie parameter
Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test pass again.
--- .../selftests/tc-testing/tc-tests/actions/tunnel_key.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json +1 -1
@@ -605,7 +605,7 @@ "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 7 index 4 cookie aa11bb22cc33dd44ee55ff66aa11b1b2", "expExitCode": "0", "verifyCmd": "$TC actions get action tunnel_key index 4", - "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*dst_port 0.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2", + "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2", "matchCount": "1", "teardown": [ "$TC actions flush action tunnel_key"
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 101/183 selftests: tc-testing: fix parsing of ife type
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 91fa038d9446b5bf5ea80822790af7dd9bcbb5a2 ]
In iproute2 commit 90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format specifier for the ife type changed from 0x%X to %#llX, causing systematic failures in the following TDC test cases:
7682 - Create valid ife encode action with mark and pass control ef47 - Create valid ife encode action with mark and pipe control df43 - Create valid ife encode action with mark and continue control e4cf - Create valid ife encode action with mark and drop control ccba - Create valid ife encode action with mark and reclassify control a1cf - Create valid ife encode action with mark and jump control cb3d - Create valid ife encode action with mark value at 32-bit maximum 95ed - Create valid ife encode action with prio and pass control aa17 - Create valid ife encode action with prio and pipe control 74c7 - Create valid ife encode action with prio and continue control 7a97 - Create valid ife encode action with prio and drop control f66b - Create valid ife encode action with prio and reclassify control 3056 - Create valid ife encode action with prio and jump control 7dd3 - Create valid ife encode action with prio value at 32-bit maximum 05bb - Create valid ife encode action with tcindex and pass control ce65 - Create valid ife encode action with tcindex and pipe control 09cd - Create valid ife encode action with tcindex and continue control 8eb5 - Create valid ife encode action with tcindex and continue control 451a - Create valid ife encode action with tcindex and drop control d76c - Create valid ife encode action with tcindex and reclassify control e731 - Create valid ife encode action with tcindex and jump control b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum 2a9c - Create valid ife encode action with mac src parameter cf5c - Create valid ife encode action with mac dst parameter 2353 - Create valid ife encode action with mac src and mac dst parameters 552c - Create valid ife encode action with mark and type parameters 0421 - Create valid ife encode action with prio and type parameters 4017 - Create valid ife encode action with tcindex and type parameters fac3 - Create valid ife encode action with index at 32-bit maximnum 7c25 - Create valid ife decode action with pass control
dccb - Create valid ife decode action with pipe control
7bb9 - Create valid ife decode action with continue control d9ad - Create valid ife decode action with drop control
219f - Create valid ife decode action with reclassify control 8f44 - Create valid ife decode action with jump control
b330 - Create ife encode action with cookie
Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').
--- .../tc-testing/tc-tests/actions/ife.json | 88 +++++++++---------- 1 file changed, 44 insertions(+), 44 deletions(-)
tools/testing/selftests/tc-testing/tc-tests/actions/ife.json +44 -44
@@ -17,7 +17,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 2", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -41,7 +41,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 10 pipe index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark.*index 2", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -65,7 +65,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark continue index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*allow mark.*index 2", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*allow mark.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -89,7 +89,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 789 drop index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*use mark 789.*index 2", + "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*use mark 789.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -113,7 +113,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 656768 reclassify index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 656768.*index 2", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 656768.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -137,7 +137,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 65 jump 1 index 2", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 2", - "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0xED3E.*use mark 65.*index 2", + "matchPattern": "action order [0-9]*: ife encode action jump 1.*type 0[xX]ED3E.*use mark 65.*index 2", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -161,7 +161,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295 reclassify index 90", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 90", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use mark 4294967295.*index 90", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use mark 4294967295.*index 90", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -185,7 +185,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 4294967295999 pipe index 90", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 90", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use mark 4294967295999.*index 90", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use mark 4294967295999.*index 90", "matchCount": "0", "teardown": [] },
@@ -207,7 +207,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio pass index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow prio.*index 9", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow prio.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -231,7 +231,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 7 pipe index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 7.*index 9", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 7.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -255,7 +255,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 3 continue index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use prio 3.*index 9", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use prio 3.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -279,7 +279,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio drop index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow prio.*index 9", + "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow prio.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -303,7 +303,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 998877 reclassify index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 998877.*index 9", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 998877.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -327,7 +327,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 998877 jump 10 index 9", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 9", - "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0xED3E.*use prio 998877.*index 9", + "matchPattern": "action order [0-9]*: ife encode action jump 10.*type 0[xX]ED3E.*use prio 998877.*index 9", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -351,7 +351,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 4294967295 reclassify index 99", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 99", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 4294967295.*index 99", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 4294967295.*index 99", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -375,7 +375,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 4294967298 pipe index 99", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 99", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use prio 4294967298.*index 99", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use prio 4294967298.*index 99", "matchCount": "0", "teardown": [] },
@@ -397,7 +397,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -421,7 +421,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 111 pipe index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 111.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 111.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -445,7 +445,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -469,7 +469,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 1 continue index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action continue.*type 0xED3E.*use tcindex 1.*index 1", + "matchPattern": "action order [0-9]*: ife encode action continue.*type 0[xX]ED3E.*use tcindex 1.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -493,7 +493,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex drop index 77", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 77", - "matchPattern": "action order [0-9]*: ife encode action drop.*type 0xED3E.*allow tcindex.*index 77", + "matchPattern": "action order [0-9]*: ife encode action drop.*type 0[xX]ED3E.*allow tcindex.*index 77", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -517,7 +517,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex reclassify index 77", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 77", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*allow tcindex.*index 77", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*allow tcindex.*index 77", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -541,7 +541,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex jump 999 index 77", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 77", - "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0xED3E.*allow tcindex.*index 77", + "matchPattern": "action order [0-9]*: ife encode action jump 999.*type 0[xX]ED3E.*allow tcindex.*index 77", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -565,7 +565,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 65535 pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*use tcindex 65535.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*use tcindex 65535.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -589,7 +589,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 65539 pipe index 1", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*use tcindex 65539.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*use tcindex 65539.*index 1", "matchCount": "0", "teardown": [] },
@@ -611,7 +611,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark src 00:11:22:33:44:55 pipe index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow mark src 00:11:22:33:44:55.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow mark src 00:11:22:33:44:55.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -635,7 +635,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 9876 dst 00:11:22:33:44:55 reclassify index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ED3E.*use prio 9876 dst 00:11:22:33:44:55.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -659,7 +659,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow tcindex src 00:aa:bb:cc:dd:ee dst 00:11:22:33:44:55 pass index 11", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 11", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow tcindex dst 00:11:22:33:44:55 src 00:aa:bb:cc:dd:ee .*index 11", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -683,7 +683,7 @@ "cmdUnderTest": "$TC actions add action ife encode use mark 7 type 0xfefe pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xFEFE.*use mark 7.*index 1", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]FEFE.*use mark 7.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -707,7 +707,7 @@ "cmdUnderTest": "$TC actions add action ife encode use prio 444 type 0xabba pipe index 21", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 21", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xABBA.*use prio 444.*index 21", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ABBA.*use prio 444.*index 21", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -731,7 +731,7 @@ "cmdUnderTest": "$TC actions add action ife encode use tcindex 5000 type 0xabcd reclassify index 21", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 21", - "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0xABCD.*use tcindex 5000.*index 21", + "matchPattern": "action order [0-9]*: ife encode action reclassify.*type 0[xX]ABCD.*use tcindex 5000.*index 21", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -739,7 +739,7 @@ }, { "id": "fac3", - "name": "Create valid ife encode action with index at 32-bit maximnum", + "name": "Create valid ife encode action with index at 32-bit maximum", "category": [ "actions", "ife"
@@ -755,7 +755,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 4294967295", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -779,7 +779,7 @@ "cmdUnderTest": "$TC actions add action ife decode pass index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action pass.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action pass.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -803,7 +803,7 @@ "cmdUnderTest": "$TC actions add action ife decode pipe index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action pipe.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -827,7 +827,7 @@ "cmdUnderTest": "$TC actions add action ife decode continue index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action continue.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action continue.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -851,7 +851,7 @@ "cmdUnderTest": "$TC actions add action ife decode drop index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action drop.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action drop.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -875,7 +875,7 @@ "cmdUnderTest": "$TC actions add action ife decode reclassify index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action reclassify.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -899,7 +899,7 @@ "cmdUnderTest": "$TC actions add action ife decode jump 10 index 1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 1", - "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0x0.*allow mark allow tcindex allow prio.*index 1", + "matchPattern": "action order [0-9]*: ife decode action jump 10.*type 0(x0)?.*allow mark allow tcindex allow prio.*index 1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -923,7 +923,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark pass index 4294967295999", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4294967295999", - "matchPattern": "action order [0-9]*: ife encode action pass.*type 0xED3E.*allow mark.*index 4294967295999", + "matchPattern": "action order [0-9]*: ife encode action pass.*type 0[xX]ED3E.*allow mark.*index 4294967295999", "matchCount": "0", "teardown": [] },
@@ -945,7 +945,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow mark kuka index 4", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0xED3E.*allow mark.*index 4", + "matchPattern": "action order [0-9]*: ife encode action kuka.*type 0[xX]ED3E.*allow mark.*index 4", "matchCount": "0", "teardown": [] },
@@ -967,7 +967,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio pipe index 4 cookie aabbccddeeff112233445566778800a1", "expExitCode": "0", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow prio.*index 4.*cookie aabbccddeeff112233445566778800a1", "matchCount": "1", "teardown": [ "$TC actions flush action ife"
@@ -991,7 +991,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow foo pipe index 4", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0xED3E.*allow foo.*index 4", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]ED3E.*allow foo.*index 4", "matchCount": "0", "teardown": [] },
@@ -1013,7 +1013,7 @@ "cmdUnderTest": "$TC actions add action ife encode allow prio type 70000 pipe index 4", "expExitCode": "255", "verifyCmd": "$TC actions get action ife index 4", - "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0x11170.*allow prio.*index 4", + "matchPattern": "action order [0-9]*: ife encode action pipe.*type 0[xX]11170.*allow prio.*index 4", "matchCount": "0", "teardown": [] },
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 102/183 afs: Dont set vnode->cb_s_break in afs_validate()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4882a27cec24319d10f95e978ecc80050e3e3e15 ]
A cb_interest record is not necessarily attached to the vnode on entry to afs_validate(), which can cause an oops when we try to bring the vnode's cb_s_break up to date in the default case (ie. no current callback promise and the vnode has not been deleted).
Fix this by simply removing the line, as vnode->cb_s_break will be set when needed by afs_register_server_cb_interest() when we next get a callback promise from RPC call.
The oops looks something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
...
RIP: 0010:afs_validate+0x66/0x250 [kafs]
...
Call Trace:
afs_d_revalidate+0x8d/0x340 [kafs]
? __d_lookup+0x61/0x150
lookup_dcache+0x44/0x70
? lookup_dcache+0x44/0x70
__lookup_hash+0x24/0xa0
do_unlinkat+0x11d/0x2c0
__x64_sys_unlink+0x23/0x30
do_syscall_64+0x4d/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9--- fs/afs/inode.c | 1 - 1 file changed, 1 deletion(-)
fs/afs/inode.c +0 -1
@@ -414,7 +414,6 @@ int afs_validate(struct afs_vnode *vnode, struct key *key) }else if (test_bit (AFS_VNODE_DELETED , &vnode->flags)) { valid = true; }else { - vnode->cb_s_break = vnode->cb_interest->server->cb_s_break; vnode->cb_v_break = vnode->volume->cb_v_break; valid = false; }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 103/183 afs: Fix key refcounting in file locking code
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 59d49076ae3e6912e6d7df2fd68e2337f3d02036 ]
Fix the refcounting of the authentication keys in the file locking code. The vnode->lock_key member points to a key on which it expects to be holding a ref, but it isn't always given an extra ref, however.
--- fs/afs/flock.c | 4 ++-- fs/afs/inode.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-)
fs/afs/flock.c +2 -2
@@ -208,7 +208,7 @@ void afs_lock_work(struct work_struct *work)/* The new front of the queue now owns the state variables. */ next =list_entry (vnode->pending_locks.next, struct file_lock, fl_u.afs.link); - vnode->lock_key =afs_file_key (next->fl_file); + vnode->lock_key =key_get (afs_file_key (next->fl_file)); vnode->lock_type = (next->fl_type ==F_RDLCK ) ?AFS_LOCK_READ :AFS_LOCK_WRITE ; vnode->lock_state =AFS_VNODE_LOCK_WAITING_FOR_CB ; goto again;
@@ -413,7 +413,7 @@ static void afs_dequeue_lock(struct afs_vnode *vnode, struct file_lock *fl)/* The new front of the queue now owns the state variables. */ next =list_entry (vnode->pending_locks.next, struct file_lock, fl_u.afs.link); - vnode->lock_key =afs_file_key (next->fl_file); + vnode->lock_key =key_get (afs_file_key (next->fl_file)); vnode->lock_type = (next->fl_type ==F_RDLCK ) ?AFS_LOCK_READ :AFS_LOCK_WRITE ; vnode->lock_state =AFS_VNODE_LOCK_WAITING_FOR_CB ;afs_lock_may_be_available (vnode);
fs/afs/inode.c +2 -0
@@ -545,6 +545,8 @@ void afs_evict_inode(struct inode *inode)#endif afs_put_permits (rcu_access_pointer (vnode->permit_cache)); +key_put (vnode->lock_key); + vnode->lock_key =NULL ;_leave ("" ); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 104/183 afs: Provide a function to get a ref on a call
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7a75b0079a1d54e342c502c3c8107ba97e05d3d3 ]
Provide a function to get a reference on an afs_call struct.
--- fs/afs/rxrpc.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
fs/afs/rxrpc.c +12 -6
@@ -203,20 +203,26 @@ void afs_put_call(struct afs_call *call) } } +static struct afs_call *afs_get_call (struct afs_call *call, +enum afs_call_trace why) +{ +int u =atomic_inc_return (&call->usage); + +trace_afs_call (call, why, u, +atomic_read (&call->net->nr_outstanding_calls), +__builtin_return_address (0 )); +return call; +} +/* * Queue the call for actual work. */ static void afs_queue_call_work (struct afs_call *call) {if (call->type->work) { -int u =atomic_inc_return (&call->usage); - -trace_afs_call (call, afs_call_trace_work, u, -atomic_read (&call->net->nr_outstanding_calls), -__builtin_return_address (0 )); -INIT_WORK (&call->work, call->type->work); +afs_get_call (call, afs_call_trace_work);if (!queue_work (afs_wq, &call->work))afs_put_call (call); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 105/183 afs: Fix race in async call refcounting
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 34fa47612bfe5d7de7fcaf658a6952b6aeec3b13 ]
There's a race between afs_make_call() and afs_wake_up_async_call() in the case that an error is returned from rxrpc_kernel_send_data() after it has queued the final packet.
afs_make_call() will try and clean up the mess, but the call state may have been moved on thereby causing afs_process_async_call() to also try and to delete the call.
Fix this by:
(1) Getting an extra ref for an asynchronous call for the call itself to hold. This makes sure the call doesn't evaporate on us accidentally and will allow the call to be retained by the caller in a future patch. The ref is released on leaving afs_make_call() or afs_wait_for_call_to_complete().
(2) In the event of an error from rxrpc_kernel_send_data():
(a) Don't set the call state to AFS_CALL_COMPLETE until *after* the call has been aborted and ended. This prevents afs_deliver_to_call() from doing anything with any notifications it gets.
(b) Explicitly end the call immediately to prevent further callbacks.
(c) Cancel any queued async_work and wait for the work if it's executing. This allows us to be sure the race won't recur when we change the state. We put the work queue's ref on the call if we managed to cancel it.
(d) Put the call's ref that we got in (1). This belongs to us as long as the call is in state AFS_CALL_CL_REQUESTING.
--- fs/afs/rxrpc.c | 35 ++++++++++++++++++++++++++++++----- include/trace/events/afs.h | 2 ++ 2 files changed, 32 insertions(+), 5 deletions(-)
fs/afs/rxrpc.c +30 -5
@@ -23,6 +23,7 @@ struct workqueue_struct *afs_async_calls;static void afs_wake_up_call_waiter (struct sock *,struct rxrpc_call *,unsigned long );static long afs_wait_for_call_to_complete (struct afs_call *,struct afs_addr_cursor *);static void afs_wake_up_async_call (struct sock *,struct rxrpc_call *,unsigned long ); +static void afs_delete_async_call (struct work_struct *);static void afs_process_async_call (struct work_struct *);static void afs_rx_new_call (struct sock *,struct rxrpc_call *,unsigned long );static void afs_rx_discard_new_call (struct rxrpc_call *,unsigned long );
@@ -404,6 +405,12 @@ long afs_make_call(struct afs_addr_cursor *ac, struct afs_call *call, } } +/* If the call is going to be asynchronous, we need an extra ref for +* the call to hold itself so the caller need not hang on to its ref. +*/ +if (call->async) +afs_get_call (call, afs_call_trace_get); +/* create a call */ rxcall = rxrpc_kernel_begin_call(call->net->socket, srx, call->key, (unsigned long)call,
@@ -444,15 +451,17 @@ long afs_make_call(struct afs_addr_cursor *ac, struct afs_call *call, goto error_do_abort; } -/* at this point, an async call may no longer exist as it may have -* already completed */ -if (call->async) +/* Note that at this point, we may have received the reply or an abort +* - and an asynchronous call may already have completed. +*/ +if (call->async) { +afs_put_call (call);return -EINPROGRESS ; + }return afs_wait_for_call_to_complete (call, ac); error_do_abort: - call->state =AFS_CALL_COMPLETE ;if (ret != -ECONNABORTED ) {rxrpc_kernel_abort_call (call->net->socket, rxcall,RX_USER_ABORT , ret,"KSD" );
@@ -469,8 +478,24 @@ long afs_make_call(struct afs_addr_cursor *ac, struct afs_call *call, error_kill_call:if (call->type->done) call->type->done (call); -afs_put_call (call); + +/* We need to dispose of the extra ref we grabbed for an async call. +* The call, however, might be queued on afs_async_calls and we need to +* make sure we don't get any more notifications that might requeue it. +*/ +if (call->rxcall) { +rxrpc_kernel_end_call (call->net->socket, call->rxcall); + call->rxcall =NULL ; + } +if (call->async) { +if (cancel_work_sync (&call->async_work)) +afs_put_call (call); +afs_put_call (call); + } + ac->error = ret; + call->state =AFS_CALL_COMPLETE ; +afs_put_call (call);_leave (" = %d" , ret);return ret; }
include/trace/events/afs.h +2 -0
@@ -25,6 +25,7 @@enum afs_call_trace { afs_call_trace_alloc, afs_call_trace_free, + afs_call_trace_get, afs_call_trace_put, afs_call_trace_wake, afs_call_trace_work,
@@ -159,6 +160,7 @@ enum afs_file_error {#define afs_call_traces \ EM(afs_call_trace_alloc, "ALLOC") \ EM(afs_call_trace_free, "FREE ") \ + EM(afs_call_trace_get, "GET ") \ EM(afs_call_trace_put, "PUT ") \ EM(afs_call_trace_wake, "WAKE ") \ E_(afs_call_trace_work, "WORK ")
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 106/183 bpf: dont assume build-id length is always 20 bytes
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 0b698005a9d11c0e91141ec11a2c4918a129f703 ]
Build-id length is not fixed to 20, it can be (man ld /--build-id):
* 128-bit (uuid)
* 160-bit (sha1)
* any length specified in ld --build-id=0xhexstring
To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids, assume that build-id is somewhere in the range of 1 .. 20.
Set the remaining bytes to zero.
v2:
* don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)", we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter this 'if' condition
--- kernel/bpf/stackmap.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
kernel/bpf/stackmap.c +5 -2
@@ -180,11 +180,14 @@ static inline int stack_map_parse_build_id(void *page_addr,if (nhdr->n_type ==BPF_BUILD_ID && nhdr->n_namesz ==sizeof ("GNU" ) && - nhdr->n_descsz ==BPF_BUILD_ID_SIZE ) { + nhdr->n_descsz >0 && + nhdr->n_descsz <=BPF_BUILD_ID_SIZE ) {memcpy (build_id, note_start + note_offs +ALIGN (sizeof ("GNU" ),4 ) +sizeof (Elf32_Nhdr), -BPF_BUILD_ID_SIZE ); + nhdr->n_descsz); +memset (build_id + nhdr->n_descsz,0 , +BPF_BUILD_ID_SIZE - nhdr->n_descsz);return 0 ; } new_offs = note_offs + sizeof(Elf32_Nhdr) +
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 107/183 bpf: zero out build_id for BPF_STACK_BUILD_ID_IP
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 4af396ae4836c4ecab61e975b8e61270c551894d ]
When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset, make sure that build_id field is empty. Since we are using percpu free list, there is a possibility that we might reuse some previous bpf_stack_build_id with non-zero build_id.
--- kernel/bpf/stackmap.c | 2 ++ 1 file changed, 2 insertions(+)
kernel/bpf/stackmap.c +2 -0
@@ -314,6 +314,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,for (i =0 ; i < trace_nr; i++) { id_offs[i].status =BPF_STACK_BUILD_ID_IP ; id_offs[i].ip = ips[i]; +memset (id_offs[i].build_id,0 ,BPF_BUILD_ID_SIZE ); }return ; }
@@ -324,6 +325,7 @@ static void stack_map_get_build_id_offset(struct bpf_stack_build_id *id_offs,/* per entry fall back to ips */ id_offs[i].status =BPF_STACK_BUILD_ID_IP ; id_offs[i].ip = ips[i]; +memset (id_offs[i].build_id,0 ,BPF_BUILD_ID_SIZE );continue ; } id_offs[i].offset = (vma->vm_pgoff <<PAGE_SHIFT ) + ips[i]
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 108/183 selftests/bpf: retry tests that expect build-id
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f67ad87ab3120e82845521b18a2b99273a340308 ]
While running test_progs in a loop I found out that I'm sometimes hitting "Didn't find expected build ID from the map" error.
Looking at stack_map_get_build_id_offset() it seems that it is racy (by design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock current->mm->mmap_sem).
Let's retry this test a single time.
--- tools/testing/selftests/bpf/test_progs.c | 30 ++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
tools/testing/selftests/bpf/test_progs.c +30 -0
@@ -1136,7 +1136,9 @@ static void test_stacktrace_build_id(void)int i, j;struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH ];int build_id_matches =0 ; +int retry =1 ; +retry: err =bpf_prog_load (file,BPF_PROG_TYPE_TRACEPOINT , &obj, &prog_fd);if (CHECK (err,"prog_load" ,"err %d errno %d\n" , err, errno)) goto out;
@@ -1249,6 +1251,19 @@ static void test_stacktrace_build_id(void) previous_key = key; }while (bpf_map_get_next_key (stackmap_fd, &previous_key, &key) ==0 ); +/* stack_map_get_build_id_offset() is racy and sometimes can return +* BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID; +* try it one more time. +*/ +if (build_id_matches <1 && retry--) { +ioctl (pmu_fd,PERF_EVENT_IOC_DISABLE ); +close (pmu_fd); +bpf_object__close (obj); +printf ("%s:WARN:Didn't find expected build ID from the map, retrying\n" , + __func__); + goto retry; + } +if (CHECK (build_id_matches <1 ,"build id match" ,"Didn't find expected build ID from the map\n" )) goto disable_pmu;
@@ -1289,7 +1304,9 @@ static void test_stacktrace_build_id_nmi(void)int i, j;struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH ];int build_id_matches =0 ; +int retry =1 ; +retry: err =bpf_prog_load (file,BPF_PROG_TYPE_PERF_EVENT , &obj, &prog_fd);if (CHECK (err,"prog_load" ,"err %d errno %d\n" , err, errno))return ;
@@ -1384,6 +1401,19 @@ static void test_stacktrace_build_id_nmi(void) previous_key = key; }while (bpf_map_get_next_key (stackmap_fd, &previous_key, &key) ==0 ); +/* stack_map_get_build_id_offset() is racy and sometimes can return +* BPF_STACK_BUILD_ID_IP instead of BPF_STACK_BUILD_ID_VALID; +* try it one more time. +*/ +if (build_id_matches <1 && retry--) { +ioctl (pmu_fd,PERF_EVENT_IOC_DISABLE ); +close (pmu_fd); +bpf_object__close (obj); +printf ("%s:WARN:Didn't find expected build ID from the map, retrying\n" , + __func__); + goto retry; + } +if (CHECK (build_id_matches <1 ,"build id match" ,"Didn't find expected build ID from the map\n" )) goto disable_pmu;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 109/183 atm: he: fix sign-extension overflow on large shift
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit cb12d72b27a6f41325ae23a11033cf5fedfa1b97 ]
Shifting the 1 by exp by an int can lead to sign-extension overlow when exp is 31 since 1 is an signed int and sign-extending this result to an unsigned long long will set the upper 32 bits. Fix this by shifting an unsigned long.
Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour
--- drivers/atm/he.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/atm/he.c +1 -1
@@ -717,7 +717,7 @@ static int he_init_cs_block_rcm(struct he_dev *he_dev)instead of '/ 512', use '>> 9' to prevent a call to divdu3 on x86 platforms */ - rate_cps = (unsigned long long ) (1 << exp) * (man +512 ) >>9 ; + rate_cps = (unsigned long long ) (1UL << exp) * (man +512 ) >>9 ;if (rate_cps <10 ) rate_cps =10 ;/* 2.2.1 minimum payload rate is 10 cps */
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 110/183 hwmon: (tmp421) Correct the misspelling of the tmp442 compatible attribute in OF device ID table
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f422449b58548a41e98fc97b259a283718e527db ]
Correct a typo in OF device ID table
The last one should be 'ti,tmp442'
--- drivers/hwmon/tmp421.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/tmp421.c +1 -1
@@ -88,7 +88,7 @@ static const struct of_device_id tmp421_of_match[] = { .data = (void *)2 }, { - .compatible = "ti,tmp422", + .compatible = "ti,tmp442", .data = (void *)3 }, { },
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 111/183 leds: lp5523: fix a missing check of return value of lp55xx_read
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 248b57015f35c94d4eae2fdd8c6febf5cd703900 ]
When lp55xx_read() fails, "status" is an uninitialized variable and thus may contain random value; using it leads to undefined behaviors.
The fix inserts a check for the return value of lp55xx_read: if it fails, returns with its error code.
--- drivers/leds/leds-lp5523.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/leds/leds-lp5523.c +3 -1
@@ -318,7 +318,9 @@ static int lp5523_init_program_engine(struct lp55xx_chip *chip)/* Let the programs run for couple of ms and check the engine status */ usleep_range (3000 ,6000 ); -lp55xx_read (chip,LP5523_REG_STATUS , &status); + ret =lp55xx_read (chip,LP5523_REG_STATUS , &status); +if (ret) +return ret; status &=LP5523_ENG_STATUS_MASK ;if (status !=LP5523_ENG_STATUS_MASK ) {
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 112/183 bpf: bpf_setsockopt: reset sock dst on SO_MARK changes
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit f4924f24da8c7ef64195096817f3cde324091d97 ]
In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used to change sk_mark, sk_dst_reset(sk) is called. The same should be done in bpf_setsockopt().
--- net/core/filter.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
net/core/filter.c +4 -1
@@ -3948,7 +3948,10 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock, sk->sk_rcvlowat = val ? :1 ;break ;case SO_MARK : - sk->sk_mark = val; +if (sk->sk_mark != val) { + sk->sk_mark = val; +sk_dst_reset (sk); + }break ;default : ret = -EINVAL ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 113/183 bpf: fix SO_MAX_PACING_RATE to support TCP internal pacing
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit e224c390a6259c529f7b2a6bd215a087b3344f5c ]
If sch_fq packet scheduler is not used, TCP can fallback to internal pacing, but this requires sk_pacing_status to be properly set.
--- net/core/filter.c | 4 ++++ 1 file changed, 4 insertions(+)
net/core/filter.c +4 -0
@@ -3935,6 +3935,10 @@ BPF_CALL_5(bpf_setsockopt, struct bpf_sock_ops_kern *, bpf_sock, sk->sk_sndbuf =max_t (int, val *2 ,SOCK_MIN_SNDBUF );break ;case SO_MAX_PACING_RATE :/* 32bit version */ +if (val != ~0U ) +cmpxchg (&sk->sk_pacing_status, +SK_PACING_NONE , +SK_PACING_NEEDED ); sk->sk_max_pacing_rate = (val == ~0U ) ? ~0UL : val; sk->sk_pacing_rate =min (sk->sk_pacing_rate, sk->sk_max_pacing_rate);
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 114/183 dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit c6ddfb9a963f0cac0f7365acfc87f3f3b33a3b69 ]
As txq_trans_update() only updates trans_start when the lock is held, trans_start does not get updated if NETIF_F_LLTX is declared.
--- drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c +6 -0
@@ -2051,6 +2051,7 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)bool nonlinear =skb_is_nonlinear (skb);struct rtnl_link_stats64 *percpu_stats;struct dpaa_percpu_priv *percpu_priv; +struct netdev_queue *txq;struct dpaa_priv *priv;struct qm_fd fd;int offset =0 ;
@@ -2100,6 +2101,11 @@ dpaa_start_xmit(struct sk_buff *skb, struct net_device *net_dev)if (unlikely (err <0 )) goto skb_to_fd_failed; + txq =netdev_get_tx_queue (net_dev, queue_mapping); + +/* LLTX requires to do our own update of trans_start */ + txq->trans_start = jiffies; +if (priv->tx_tstamp &&skb_shinfo (skb)->tx_flags &SKBTX_HW_TSTAMP ) { fd.cmd |=cpu_to_be32 (FM_FD_CMD_UPD );skb_shinfo (skb)->tx_flags |=SKBTX_IN_PROGRESS ;
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 115/183 mlxsw: pci: Return error on PCI reset timeout
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 67c14cc9b35055264fc0efed00159a7de1819f1b ]
Return an appropriate error in the case when the driver timeouts on waiting for firmware to go out of PCI reset.
--- drivers/net/ethernet/mellanox/mlxsw/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/pci.c +2 -2
@@ -1367,10 +1367,10 @@ static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci,u32 val =mlxsw_pci_read32 (mlxsw_pci,FW_READY );if ((val &MLXSW_PCI_FW_READY_MASK ) ==MLXSW_PCI_FW_READY_MAGIC ) -break ; +return 0 ;cond_resched (); }while (time_before (jiffies, end)); -return 0 ; +return -EBUSY ; }static int mlxsw_pci_alloc_irq_vectors (struct mlxsw_pci *mlxsw_pci)
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 116/183 net: bridge: Mark FDB entries that were added by user as such
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 710ae72877378e7cde611efd30fe90502a6e5b30 ]
Externally learned entries can be added by a user or by a switch driver that is notifying the bridge driver about entries that were learned in hardware.
In the first case, the entries are not marked with the 'added_by_user' flag, which causes switch drivers to ignore them and not offload them.
The 'added_by_user' flag can be set on externally learned FDB entries based on the 'swdev_notify' parameter in br_fdb_external_learn_add(), which effectively means if the created / updated FDB entry was added by a user or not.
--- net/bridge/br_fdb.c | 5 +++++ 1 file changed, 5 insertions(+)
net/bridge/br_fdb.c +5 -0
@@ -1102,6 +1102,8 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p, err = -ENOMEM ; goto err_unlock; } +if (swdev_notify) + fdb->added_by_user =1 ; fdb->added_by_external_learn =1 ;fdb_notify (br, fdb,RTM_NEWNEIGH , swdev_notify); }else {
@@ -1121,6 +1123,9 @@ int br_fdb_external_learn_add(struct net_bridge *br, struct net_bridge_port *p, modified = true; } +if (swdev_notify) + fdb->added_by_user =1 ; +if (modified)fdb_notify (br, fdb,RTM_NEWNEIGH , swdev_notify); }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 117/183 mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 64254a2054611205798e6bde634639bc704573ac ]
The driver currently treats static FDB entries as both static and sticky. This is incorrect and prevents such entries from being roamed to a different port via learning.
Fix this by configuring static entries with ageing disabled and roaming enabled.
In net-next we can add proper support for the newly introduced 'sticky' flag.
--- .../net/ethernet/mellanox/mlxsw/spectrum_switchdev.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +6 -6
@@ -1219,7 +1219,7 @@ mlxsw_sp_bridge_port_fdb_flush(struct mlxsw_sp *mlxsw_sp,static enum mlxsw_reg_sfd_rec_policy mlxsw_sp_sfd_rec_policy (bool dynamic) {return dynamic ?MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_INGRESS : -MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY ; +MLXSW_REG_SFD_REC_POLICY_DYNAMIC_ENTRY_MLAG ; }static enum mlxsw_reg_sfd_op mlxsw_sp_sfd_op (bool adding)
@@ -1276,7 +1276,7 @@ static int mlxsw_sp_port_fdb_tunnel_uc_op(struct mlxsw_sp *mlxsw_sp,static int __mlxsw_sp_port_fdb_uc_op (struct mlxsw_sp *mlxsw_sp,u8 local_port,const char *mac,u16 fid,bool adding,enum mlxsw_reg_sfd_rec_action action, -bool dynamic) +enum mlxsw_reg_sfd_rec_policy policy) {char *sfd_pl;u8 num_rec;
@@ -1287,8 +1287,7 @@ static int __mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port,return -ENOMEM ;mlxsw_reg_sfd_pack (sfd_pl,mlxsw_sp_sfd_op (adding),0 ); -mlxsw_reg_sfd_uc_pack (sfd_pl,0 ,mlxsw_sp_sfd_rec_policy (dynamic), - mac, fid, action, local_port); +mlxsw_reg_sfd_uc_pack (sfd_pl,0 , policy, mac, fid, action, local_port); num_rec =mlxsw_reg_sfd_num_rec_get (sfd_pl); err =mlxsw_reg_write (mlxsw_sp->core,MLXSW_REG (sfd), sfd_pl);if (err)
@@ -1307,7 +1306,8 @@ static int mlxsw_sp_port_fdb_uc_op(struct mlxsw_sp *mlxsw_sp, u8 local_port, bool dynamic) {return __mlxsw_sp_port_fdb_uc_op (mlxsw_sp, local_port, mac, fid, adding, -MLXSW_REG_SFD_REC_ACTION_NOP , dynamic); +MLXSW_REG_SFD_REC_ACTION_NOP , +mlxsw_sp_sfd_rec_policy (dynamic)); } int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid,
@@ -1315,7 +1315,7 @@ int mlxsw_sp_rif_fdb_op(struct mlxsw_sp *mlxsw_sp, const char *mac, u16 fid, {return __mlxsw_sp_port_fdb_uc_op (mlxsw_sp,0 , mac, fid, adding,MLXSW_REG_SFD_REC_ACTION_FORWARD_IP_ROUTER , - false); +MLXSW_REG_SFD_REC_POLICY_STATIC_ENTRY ); } static int mlxsw_sp_port_fdb_uc_lag_op(struct mlxsw_sp *mlxsw_sp, u16 lag_id,
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 118/183 selftests: forwarding: Add a test case for externally learned FDB entries
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 479a2b761d61c04e2ae97325aa391a8a8c99c23e ]
Test that externally learned FDB entries can roam, but not age out.
--- .../net/forwarding/bridge_vlan_aware.sh | 34 ++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-)
tools/testing/selftests/net/forwarding/bridge_vlan_aware.sh +33 -1
@@ -1,7 +1,7 @@ #!/bin/bash # SPDX-License-Identifier: GPL-2.0 -ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion" +ALL_TESTS="ping_ipv4 ping_ipv6 learning flooding vlan_deletion extern_learn" NUM_NETIFS=4 CHECK_TC="yes" source lib.sh
@@ -109,6 +109,38 @@ vlan_deletion() ping_ipv6 } +extern_learn() +{ + local mac=de:ad:be:ef:13:37 + local ageing_time + + # Test that externally learned FDB entries can roam, but not age out + RET=0 + + bridge fdb add de:ad:be:ef:13:37 dev $swp1 master extern_learn vlan 1 + + bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37 + check_err $? "Did not find FDB entry when should" + + # Wait for 10 seconds after the ageing time to make sure the FDB entry + # was not aged out + ageing_time=$(bridge_ageing_time_get br0) + sleep $((ageing_time + 10)) + + bridge fdb show brport $swp1 | grep -q de:ad:be:ef:13:37 + check_err $? "FDB entry was aged out when should not" + + $MZ $h2 -c 1 -p 64 -a $mac -t ip -q + + bridge fdb show brport $swp2 | grep -q de:ad:be:ef:13:37 + check_err $? "FDB entry did not roam when should" + + log_test "Externally learned FDB entry - ageing & roaming" + + bridge fdb del de:ad:be:ef:13:37 dev $swp2 master vlan 1 &> /dev/null + bridge fdb del de:ad:be:ef:13:37 dev $swp1 master vlan 1 &> /dev/null +} + trap cleanup EXIT setup_prepare
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 119/183 bpf: pull in pkt_sched.h header for tooling to fix bpftool build
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit ad6dd7a9c47ba587c0aba57f73737764cd31136f ]
Dan reported that bpftool does not compile for him:
$ make tools/bpf
DESCEND bpf Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
DESCEND bpftool
Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
CC /opt/linux.git/tools/bpf/bpftool/net.o
In file included from /opt/linux.git/tools/include/uapi/linux/pkt_cls.h:6:0,
from /opt/linux.git/tools/include/uapi/linux/tc_act/tc_bpf.h:14,
from net.c:13:
net.c: In function 'show_dev_tc_bpf':
net.c:164:21: error: 'TC_H_CLSACT' undeclared (first use in this function)
handle = TC_H_MAKE(TC_H_CLSACT, TC_H_MIN_INGRESS);[...]
Fix it by importing pkt_sched.h header copy into tooling infrastructure.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=202315
--- tools/include/uapi/linux/pkt_sched.h | 1163 ++++++++++++++++++++++++++ 1 file changed, 1163 insertions(+) create mode 100644 tools/include/uapi/linux/pkt_sched.h
tools/include/uapi/linux/pkt_sched.h new file +1163 -0
@@ -0,0 +1,1163 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __LINUX_PKT_SCHED_H +#define __LINUX_PKT_SCHED_H + +#include <linux/types.h> + +/* Logical priority bands not depending on specific packet scheduler. +Every scheduler will map them to real traffic classes, if it has +no more precise mechanism to classify packets. + +These numbers have no special meaning, though their coincidence +with obsolete IPv6 values is not occasional :-). New IPv6 drafts +preferred full anarchy inspired by diffserv group. + +Note: TC_PRIO_BESTEFFORT does not mean that it is the most unhappy +class, actually, as rule it will be handled with more care than +filler or even bulk. +*/ + +#define TC_PRIO_BESTEFFORT 0 +#define TC_PRIO_FILLER 1 +#define TC_PRIO_BULK 2 +#define TC_PRIO_INTERACTIVE_BULK 4 +#define TC_PRIO_INTERACTIVE 6 +#define TC_PRIO_CONTROL 7 + +#define TC_PRIO_MAX 15 + +/* Generic queue statistics, available for all the elements. +Particular schedulers may have also their private records. +*/ + +struct tc_stats { +__u64 bytes;/* Number of enqueued bytes */ +__u32 packets;/* Number of enqueued packets */ +__u32 drops;/* Packets dropped because of lack of resources */ +__u32 overlimits;/* Number of throttle events when this +* flow goes out of allocated bandwidth */ +__u32 bps;/* Current flow byte rate */ +__u32 pps;/* Current flow packet rate */ +__u32 qlen; +__u32 backlog; +}; + +struct tc_estimator { +signed char interval; +unsigned char ewma_log; +}; + +/* "Handles" +--------- + +All the traffic control objects have 32bit identifiers, or "handles". + +They can be considered as opaque numbers from user API viewpoint, +but actually they always consist of two fields: major and +minor numbers, which are interpreted by kernel specially, +that may be used by applications, though not recommended. + +F.e. qdisc handles always have minor number equal to zero, +classes (or flows) have major equal to parent qdisc major, and +minor uniquely identifying class inside qdisc. + +Macros to manipulate handles: +*/ + +#define TC_H_MAJ_MASK (0xFFFF0000U) +#define TC_H_MIN_MASK (0x0000FFFFU) +#define TC_H_MAJ (h) ((h)&TC_H_MAJ_MASK) +#define TC_H_MIN (h) ((h)&TC_H_MIN_MASK) +#define TC_H_MAKE (maj,min) (((maj)&TC_H_MAJ_MASK)|((min)&TC_H_MIN_MASK)) + +#define TC_H_UNSPEC (0U) +#define TC_H_ROOT (0xFFFFFFFFU) +#define TC_H_INGRESS (0xFFFFFFF1U) +#define TC_H_CLSACT TC_H_INGRESS + +#define TC_H_MIN_PRIORITY 0xFFE0U +#define TC_H_MIN_INGRESS 0xFFF2U +#define TC_H_MIN_EGRESS 0xFFF3U + +/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */ +enum tc_link_layer { +TC_LINKLAYER_UNAWARE ,/* Indicate unaware old iproute2 util */ +TC_LINKLAYER_ETHERNET , +TC_LINKLAYER_ATM , +}; +#define TC_LINKLAYER_MASK 0x0F/* limit use to lower 4 bits */ + +struct tc_ratespec { +unsigned char cell_log; +__u8 linklayer;/* lower 4 bits */ +unsigned short overhead; +short cell_align; +unsigned short mpu; +__u32 rate; +}; + +#define TC_RTAB_SIZE 1024 + +struct tc_sizespec { +unsigned char cell_log; +unsigned char size_log; +short cell_align; +int overhead; +unsigned int linklayer; +unsigned int mpu; +unsigned int mtu; +unsigned int tsize; +}; + +enum { +TCA_STAB_UNSPEC , +TCA_STAB_BASE , +TCA_STAB_DATA , + __TCA_STAB_MAX +}; + +#define TCA_STAB_MAX (__TCA_STAB_MAX - 1) + +/* FIFO section */ + +struct tc_fifo_qopt { +__u32 limit;/* Queue length: bytes for bfifo, packets for pfifo */ +}; + +/* SKBPRIO section */ + +/* +* Priorities go from zero to (SKBPRIO_MAX_PRIORITY - 1). +* SKBPRIO_MAX_PRIORITY should be at least 64 in order for skbprio to be able +* to map one to one the DS field of IPV4 and IPV6 headers. +* Memory allocation grows linearly with SKBPRIO_MAX_PRIORITY. +*/ + +#define SKBPRIO_MAX_PRIORITY 64 + +struct tc_skbprio_qopt { +__u32 limit;/* Queue length in packets. */ +}; + +/* PRIO section */ + +#define TCQ_PRIO_BANDS 16 +#define TCQ_MIN_PRIO_BANDS 2 + +struct tc_prio_qopt { +int bands;/* Number of bands */ +__u8 priomap[TC_PRIO_MAX +1 ];/* Map: logical priority -> PRIO band */ +}; + +/* MULTIQ section */ + +struct tc_multiq_qopt { +__u16 bands;/* Number of bands */ +__u16 max_bands;/* Maximum number of queues */ +}; + +/* PLUG section */ + +#define TCQ_PLUG_BUFFER 0 +#define TCQ_PLUG_RELEASE_ONE 1 +#define TCQ_PLUG_RELEASE_INDEFINITE 2 +#define TCQ_PLUG_LIMIT 3 + +struct tc_plug_qopt { +/* TCQ_PLUG_BUFFER: Inset a plug into the queue and +* buffer any incoming packets +* TCQ_PLUG_RELEASE_ONE: Dequeue packets from queue head +* to beginning of the next plug. +* TCQ_PLUG_RELEASE_INDEFINITE: Dequeue all packets from queue. +* Stop buffering packets until the next TCQ_PLUG_BUFFER +* command is received (just act as a pass-thru queue). +* TCQ_PLUG_LIMIT: Increase/decrease queue size +*/ +int action; +__u32 limit; +}; + +/* TBF section */ + +struct tc_tbf_qopt { +struct tc_ratespec rate; +struct tc_ratespec peakrate; +__u32 limit; +__u32 buffer; +__u32 mtu; +}; + +enum { +TCA_TBF_UNSPEC , +TCA_TBF_PARMS , +TCA_TBF_RTAB , +TCA_TBF_PTAB , +TCA_TBF_RATE64 , +TCA_TBF_PRATE64 , +TCA_TBF_BURST , +TCA_TBF_PBURST , +TCA_TBF_PAD , + __TCA_TBF_MAX, +}; + +#define TCA_TBF_MAX (__TCA_TBF_MAX - 1) + + +/* TEQL section */ + +/* TEQL does not require any parameters */ + +/* SFQ section */ + +struct tc_sfq_qopt { +unsigned quantum;/* Bytes per round allocated to flow */ +int perturb_period;/* Period of hash perturbation */ +__u32 limit;/* Maximal packets in queue */ +unsigned divisor;/* Hash divisor */ +unsigned flows;/* Maximal number of flows */ +}; + +struct tc_sfqred_stats { +__u32 prob_drop;/* Early drops, below max threshold */ +__u32 forced_drop;/* Early drops, after max threshold */ +__u32 prob_mark;/* Marked packets, below max threshold */ +__u32 forced_mark;/* Marked packets, after max threshold */ +__u32 prob_mark_head;/* Marked packets, below max threshold */ +__u32 forced_mark_head;/* Marked packets, after max threshold */ +}; + +struct tc_sfq_qopt_v1 { +struct tc_sfq_qopt v0; +unsigned int depth;/* max number of packets per flow */ +unsigned int headdrop; +/* SFQRED parameters */ +__u32 limit;/* HARD maximal flow queue length (bytes) */ +__u32 qth_min;/* Min average length threshold (bytes) */ +__u32 qth_max;/* Max average length threshold (bytes) */ +unsigned char Wlog;/* log(W) */ +unsigned char Plog;/* log(P_max/(qth_max-qth_min)) */ +unsigned char Scell_log;/* cell size for idle damping */ +unsigned char flags; +__u32 max_P;/* probability, high resolution */ +/* SFQRED stats */ +struct tc_sfqred_stats stats; +}; + + +struct tc_sfq_xstats { +__s32 allot; +}; + +/* RED section */ + +enum { +TCA_RED_UNSPEC , +TCA_RED_PARMS , +TCA_RED_STAB , +TCA_RED_MAX_P , + __TCA_RED_MAX, +}; + +#define TCA_RED_MAX (__TCA_RED_MAX - 1) + +struct tc_red_qopt { +__u32 limit;/* HARD maximal queue length (bytes) */ +__u32 qth_min;/* Min average length threshold (bytes) */ +__u32 qth_max;/* Max average length threshold (bytes) */ +unsigned char Wlog;/* log(W) */ +unsigned char Plog;/* log(P_max/(qth_max-qth_min)) */ +unsigned char Scell_log;/* cell size for idle damping */ +unsigned char flags; +#define TC_RED_ECN 1 +#define TC_RED_HARDDROP 2 +#define TC_RED_ADAPTATIVE 4 +}; + +struct tc_red_xstats { +__u32 early;/* Early drops */ +__u32 pdrop;/* Drops due to queue limits */ +__u32 other;/* Drops due to drop() calls */ +__u32 marked;/* Marked packets */ +}; + +/* GRED section */ + +#define MAX_DPs 16 + +enum { +TCA_GRED_UNSPEC , +TCA_GRED_PARMS , +TCA_GRED_STAB , +TCA_GRED_DPS , +TCA_GRED_MAX_P , +TCA_GRED_LIMIT , +TCA_GRED_VQ_LIST ,/* nested TCA_GRED_VQ_ENTRY */ + __TCA_GRED_MAX, +}; + +#define TCA_GRED_MAX (__TCA_GRED_MAX - 1) + +enum { +TCA_GRED_VQ_ENTRY_UNSPEC , +TCA_GRED_VQ_ENTRY ,/* nested TCA_GRED_VQ_* */ + __TCA_GRED_VQ_ENTRY_MAX, +}; +#define TCA_GRED_VQ_ENTRY_MAX (__TCA_GRED_VQ_ENTRY_MAX - 1) + +enum { +TCA_GRED_VQ_UNSPEC , +TCA_GRED_VQ_PAD , +TCA_GRED_VQ_DP ,/* u32 */ +TCA_GRED_VQ_STAT_BYTES ,/* u64 */ +TCA_GRED_VQ_STAT_PACKETS ,/* u32 */ +TCA_GRED_VQ_STAT_BACKLOG ,/* u32 */ +TCA_GRED_VQ_STAT_PROB_DROP ,/* u32 */ +TCA_GRED_VQ_STAT_PROB_MARK ,/* u32 */ +TCA_GRED_VQ_STAT_FORCED_DROP ,/* u32 */ +TCA_GRED_VQ_STAT_FORCED_MARK ,/* u32 */ +TCA_GRED_VQ_STAT_PDROP ,/* u32 */ +TCA_GRED_VQ_STAT_OTHER ,/* u32 */ +TCA_GRED_VQ_FLAGS ,/* u32 */ + __TCA_GRED_VQ_MAX +}; + +#define TCA_GRED_VQ_MAX (__TCA_GRED_VQ_MAX - 1) + +struct tc_gred_qopt { +__u32 limit;/* HARD maximal queue length (bytes) */ +__u32 qth_min;/* Min average length threshold (bytes) */ +__u32 qth_max;/* Max average length threshold (bytes) */ +__u32 DP;/* up to 2^32 DPs */ +__u32 backlog; +__u32 qave; +__u32 forced; +__u32 early; +__u32 other; +__u32 pdrop; +__u8 Wlog;/* log(W) */ +__u8 Plog;/* log(P_max/(qth_max-qth_min)) */ +__u8 Scell_log;/* cell size for idle damping */ +__u8 prio;/* prio of this VQ */ +__u32 packets; +__u32 bytesin; +}; + +/* gred setup */ +struct tc_gred_sopt { +__u32 DPs; +__u32 def_DP; +__u8 grio; +__u8 flags; +__u16 pad1; +}; + +/* CHOKe section */ + +enum { +TCA_CHOKE_UNSPEC , +TCA_CHOKE_PARMS , +TCA_CHOKE_STAB , +TCA_CHOKE_MAX_P , + __TCA_CHOKE_MAX, +}; + +#define TCA_CHOKE_MAX (__TCA_CHOKE_MAX - 1) + +struct tc_choke_qopt { +__u32 limit;/* Hard queue length (packets) */ +__u32 qth_min;/* Min average threshold (packets) */ +__u32 qth_max;/* Max average threshold (packets) */ +unsigned char Wlog;/* log(W) */ +unsigned char Plog;/* log(P_max/(qth_max-qth_min)) */ +unsigned char Scell_log;/* cell size for idle damping */ +unsigned char flags;/* see RED flags */ +}; + +struct tc_choke_xstats { +__u32 early;/* Early drops */ +__u32 pdrop;/* Drops due to queue limits */ +__u32 other;/* Drops due to drop() calls */ +__u32 marked;/* Marked packets */ +__u32 matched;/* Drops due to flow match */ +}; + +/* HTB section */ +#define TC_HTB_NUMPRIO 8 +#define TC_HTB_MAXDEPTH 8 +#define TC_HTB_PROTOVER 3/* the same as HTB and TC's major */ + +struct tc_htb_opt { +struct tc_ratespec rate; +struct tc_ratespec ceil; +__u32 buffer; +__u32 cbuffer; +__u32 quantum; +__u32 level;/* out only */ +__u32 prio; +}; +struct tc_htb_glob { +__u32 version;/* to match HTB/TC */ +__u32 rate2quantum;/* bps->quantum divisor */ +__u32 defcls;/* default class number */ +__u32 debug;/* debug flags */ + +/* stats */ +__u32 direct_pkts;/* count of non shaped packets */ +}; +enum { +TCA_HTB_UNSPEC , +TCA_HTB_PARMS , +TCA_HTB_INIT , +TCA_HTB_CTAB , +TCA_HTB_RTAB , +TCA_HTB_DIRECT_QLEN , +TCA_HTB_RATE64 , +TCA_HTB_CEIL64 , +TCA_HTB_PAD , + __TCA_HTB_MAX, +}; + +#define TCA_HTB_MAX (__TCA_HTB_MAX - 1) + +struct tc_htb_xstats { +__u32 lends; +__u32 borrows; +__u32 giants;/* unused since 'Make HTB scheduler work with TSO.' */ +__s32 tokens; +__s32 ctokens; +}; + +/* HFSC section */ + +struct tc_hfsc_qopt { +__u16 defcls;/* default class */ +}; + +struct tc_service_curve { +__u32 m1;/* slope of the first segment in bps */ +__u32 d;/* x-projection of the first segment in us */ +__u32 m2;/* slope of the second segment in bps */ +}; + +struct tc_hfsc_stats { +__u64 work;/* total work done */ +__u64 rtwork;/* work done by real-time criteria */ +__u32 period;/* current period */ +__u32 level;/* class level in hierarchy */ +}; + +enum { +TCA_HFSC_UNSPEC , +TCA_HFSC_RSC , +TCA_HFSC_FSC , +TCA_HFSC_USC , + __TCA_HFSC_MAX, +}; + +#define TCA_HFSC_MAX (__TCA_HFSC_MAX - 1) + + +/* CBQ section */ + +#define TC_CBQ_MAXPRIO 8 +#define TC_CBQ_MAXLEVEL 8 +#define TC_CBQ_DEF_EWMA 5 + +struct tc_cbq_lssopt { +unsigned char change; +unsigned char flags; +#define TCF_CBQ_LSS_BOUNDED 1 +#define TCF_CBQ_LSS_ISOLATED 2 +unsigned char ewma_log; +unsigned char level; +#define TCF_CBQ_LSS_FLAGS 1 +#define TCF_CBQ_LSS_EWMA 2 +#define TCF_CBQ_LSS_MAXIDLE 4 +#define TCF_CBQ_LSS_MINIDLE 8 +#define TCF_CBQ_LSS_OFFTIME 0x10 +#define TCF_CBQ_LSS_AVPKT 0x20 +__u32 maxidle; +__u32 minidle; +__u32 offtime; +__u32 avpkt; +}; + +struct tc_cbq_wrropt { +unsigned char flags; +unsigned char priority; +unsigned char cpriority; +unsigned char __reserved; +__u32 allot; +__u32 weight; +}; + +struct tc_cbq_ovl { +unsigned char strategy; +#define TC_CBQ_OVL_CLASSIC 0 +#define TC_CBQ_OVL_DELAY 1 +#define TC_CBQ_OVL_LOWPRIO 2 +#define TC_CBQ_OVL_DROP 3 +#define TC_CBQ_OVL_RCLASSIC 4 +unsigned char priority2; +__u16 pad; +__u32 penalty; +}; + +struct tc_cbq_police { +unsigned char police; +unsigned char __res1; +unsigned short __res2; +}; + +struct tc_cbq_fopt { +__u32 split; +__u32 defmap; +__u32 defchange; +}; + +struct tc_cbq_xstats { +__u32 borrows; +__u32 overactions; +__s32 avgidle; +__s32 undertime; +}; + +enum { +TCA_CBQ_UNSPEC , +TCA_CBQ_LSSOPT , +TCA_CBQ_WRROPT , +TCA_CBQ_FOPT , +TCA_CBQ_OVL_STRATEGY , +TCA_CBQ_RATE , +TCA_CBQ_RTAB , +TCA_CBQ_POLICE , + __TCA_CBQ_MAX, +}; + +#define TCA_CBQ_MAX (__TCA_CBQ_MAX - 1) + +/* dsmark section */ + +enum { +TCA_DSMARK_UNSPEC , +TCA_DSMARK_INDICES , +TCA_DSMARK_DEFAULT_INDEX , +TCA_DSMARK_SET_TC_INDEX , +TCA_DSMARK_MASK , +TCA_DSMARK_VALUE , + __TCA_DSMARK_MAX, +}; + +#define TCA_DSMARK_MAX (__TCA_DSMARK_MAX - 1) + +/* ATM section */ + +enum { +TCA_ATM_UNSPEC , +TCA_ATM_FD ,/* file/socket descriptor */ +TCA_ATM_PTR ,/* pointer to descriptor - later */ +TCA_ATM_HDR ,/* LL header */ +TCA_ATM_EXCESS ,/* excess traffic class (0 for CLP) */ +TCA_ATM_ADDR ,/* PVC address (for output only) */ +TCA_ATM_STATE ,/* VC state (ATM_VS_*; for output only) */ + __TCA_ATM_MAX, +}; + +#define TCA_ATM_MAX (__TCA_ATM_MAX - 1) + +/* Network emulator */ + +enum { +TCA_NETEM_UNSPEC , +TCA_NETEM_CORR , +TCA_NETEM_DELAY_DIST , +TCA_NETEM_REORDER , +TCA_NETEM_CORRUPT , +TCA_NETEM_LOSS , +TCA_NETEM_RATE , +TCA_NETEM_ECN , +TCA_NETEM_RATE64 , +TCA_NETEM_PAD , +TCA_NETEM_LATENCY64 , +TCA_NETEM_JITTER64 , +TCA_NETEM_SLOT , +TCA_NETEM_SLOT_DIST , + __TCA_NETEM_MAX, +}; + +#define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1) + +struct tc_netem_qopt { +__u32 latency;/* added delay (us) */ +__u32 limit;/* fifo limit (packets) */ +__u32 loss;/* random packet loss (0=none ~0=100%) */ +__u32 gap;/* re-ordering gap (0 for none) */ +__u32 duplicate;/* random packet dup (0=none ~0=100%) */ +__u32 jitter;/* random jitter in latency (us) */ +}; + +struct tc_netem_corr { +__u32 delay_corr;/* delay correlation */ +__u32 loss_corr;/* packet loss correlation */ +__u32 dup_corr;/* duplicate correlation */ +}; + +struct tc_netem_reorder { +__u32 probability; +__u32 correlation; +}; + +struct tc_netem_corrupt { +__u32 probability; +__u32 correlation; +}; + +struct tc_netem_rate { +__u32 rate;/* byte/s */ +__s32 packet_overhead; +__u32 cell_size; +__s32 cell_overhead; +}; + +struct tc_netem_slot { +__s64 min_delay;/* nsec */ +__s64 max_delay; +__s32 max_packets; +__s32 max_bytes; +__s64 dist_delay;/* nsec */ +__s64 dist_jitter;/* nsec */ +}; + +enum { +NETEM_LOSS_UNSPEC , +NETEM_LOSS_GI ,/* General Intuitive - 4 state model */ +NETEM_LOSS_GE ,/* Gilbert Elliot models */ + __NETEM_LOSS_MAX +}; +#define NETEM_LOSS_MAX (__NETEM_LOSS_MAX - 1) + +/* State transition probabilities for 4 state model */ +struct tc_netem_gimodel { +__u32 p13; +__u32 p31; +__u32 p32; +__u32 p14; +__u32 p23; +}; + +/* Gilbert-Elliot models */ +struct tc_netem_gemodel { +__u32 p; +__u32 r; +__u32 h; +__u32 k1; +}; + +#define NETEM_DIST_SCALE 8192 +#define NETEM_DIST_MAX 16384 + +/* DRR */ + +enum { +TCA_DRR_UNSPEC , +TCA_DRR_QUANTUM , + __TCA_DRR_MAX +}; + +#define TCA_DRR_MAX (__TCA_DRR_MAX - 1) + +struct tc_drr_stats { +__u32 deficit; +}; + +/* MQPRIO */ +#define TC_QOPT_BITMASK 15 +#define TC_QOPT_MAX_QUEUE 16 + +enum { +TC_MQPRIO_HW_OFFLOAD_NONE ,/* no offload requested */ +TC_MQPRIO_HW_OFFLOAD_TCS ,/* offload TCs, no queue counts */ + __TC_MQPRIO_HW_OFFLOAD_MAX +}; + +#define TC_MQPRIO_HW_OFFLOAD_MAX (__TC_MQPRIO_HW_OFFLOAD_MAX - 1) + +enum { +TC_MQPRIO_MODE_DCB , +TC_MQPRIO_MODE_CHANNEL , + __TC_MQPRIO_MODE_MAX +}; + +#define __TC_MQPRIO_MODE_MAX (__TC_MQPRIO_MODE_MAX - 1) + +enum { +TC_MQPRIO_SHAPER_DCB , +TC_MQPRIO_SHAPER_BW_RATE ,/* Add new shapers below */ + __TC_MQPRIO_SHAPER_MAX +}; + +#define __TC_MQPRIO_SHAPER_MAX (__TC_MQPRIO_SHAPER_MAX - 1) + +struct tc_mqprio_qopt { +__u8 num_tc; +__u8 prio_tc_map[TC_QOPT_BITMASK +1 ]; +__u8 hw; +__u16 count[TC_QOPT_MAX_QUEUE ]; +__u16 offset[TC_QOPT_MAX_QUEUE ]; +}; + +#define TC_MQPRIO_F_MODE 0x1 +#define TC_MQPRIO_F_SHAPER 0x2 +#define TC_MQPRIO_F_MIN_RATE 0x4 +#define TC_MQPRIO_F_MAX_RATE 0x8 + +enum { +TCA_MQPRIO_UNSPEC , +TCA_MQPRIO_MODE , +TCA_MQPRIO_SHAPER , +TCA_MQPRIO_MIN_RATE64 , +TCA_MQPRIO_MAX_RATE64 , + __TCA_MQPRIO_MAX, +}; + +#define TCA_MQPRIO_MAX (__TCA_MQPRIO_MAX - 1) + +/* SFB */ + +enum { +TCA_SFB_UNSPEC , +TCA_SFB_PARMS , + __TCA_SFB_MAX, +}; + +#define TCA_SFB_MAX (__TCA_SFB_MAX - 1) + +/* +* Note: increment, decrement are Q0.16 fixed-point values. +*/ +struct tc_sfb_qopt { +__u32 rehash_interval;/* delay between hash move, in ms */ +__u32 warmup_time;/* double buffering warmup time in ms (warmup_time < rehash_interval) */ +__u32 max;/* max len of qlen_min */ +__u32 bin_size;/* maximum queue length per bin */ +__u32 increment;/* probability increment, (d1 in Blue) */ +__u32 decrement;/* probability decrement, (d2 in Blue) */ +__u32 limit;/* max SFB queue length */ +__u32 penalty_rate;/* inelastic flows are rate limited to 'rate' pps */ +__u32 penalty_burst; +}; + +struct tc_sfb_xstats { +__u32 earlydrop; +__u32 penaltydrop; +__u32 bucketdrop; +__u32 queuedrop; +__u32 childdrop;/* drops in child qdisc */ +__u32 marked; +__u32 maxqlen; +__u32 maxprob; +__u32 avgprob; +}; + +#define SFB_MAX_PROB 0xFFFF + +/* QFQ */ +enum { +TCA_QFQ_UNSPEC , +TCA_QFQ_WEIGHT , +TCA_QFQ_LMAX , + __TCA_QFQ_MAX +}; + +#define TCA_QFQ_MAX (__TCA_QFQ_MAX - 1) + +struct tc_qfq_stats { +__u32 weight; +__u32 lmax; +}; + +/* CODEL */ + +enum { +TCA_CODEL_UNSPEC , +TCA_CODEL_TARGET , +TCA_CODEL_LIMIT , +TCA_CODEL_INTERVAL , +TCA_CODEL_ECN , +TCA_CODEL_CE_THRESHOLD , + __TCA_CODEL_MAX +}; + +#define TCA_CODEL_MAX (__TCA_CODEL_MAX - 1) + +struct tc_codel_xstats { +__u32 maxpacket;/* largest packet we've seen so far */ +__u32 count;/* how many drops we've done since the last time we +* entered dropping state +*/ +__u32 lastcount;/* count at entry to dropping state */ +__u32 ldelay;/* in-queue delay seen by most recently dequeued packet */ +__s32 drop_next;/* time to drop next packet */ +__u32 drop_overlimit;/* number of time max qdisc packet limit was hit */ +__u32 ecn_mark;/* number of packets we ECN marked instead of dropped */ +__u32 dropping;/* are we in dropping state ? */ +__u32 ce_mark;/* number of CE marked packets because of ce_threshold */ +}; + +/* FQ_CODEL */ + +enum { +TCA_FQ_CODEL_UNSPEC , +TCA_FQ_CODEL_TARGET , +TCA_FQ_CODEL_LIMIT , +TCA_FQ_CODEL_INTERVAL , +TCA_FQ_CODEL_ECN , +TCA_FQ_CODEL_FLOWS , +TCA_FQ_CODEL_QUANTUM , +TCA_FQ_CODEL_CE_THRESHOLD , +TCA_FQ_CODEL_DROP_BATCH_SIZE , +TCA_FQ_CODEL_MEMORY_LIMIT , + __TCA_FQ_CODEL_MAX +}; + +#define TCA_FQ_CODEL_MAX (__TCA_FQ_CODEL_MAX - 1) + +enum { +TCA_FQ_CODEL_XSTATS_QDISC , +TCA_FQ_CODEL_XSTATS_CLASS , +}; + +struct tc_fq_codel_qd_stats { +__u32 maxpacket;/* largest packet we've seen so far */ +__u32 drop_overlimit;/* number of time max qdisc +* packet limit was hit +*/ +__u32 ecn_mark;/* number of packets we ECN marked +* instead of being dropped +*/ +__u32 new_flow_count;/* number of time packets +* created a 'new flow' +*/ +__u32 new_flows_len;/* count of flows in new list */ +__u32 old_flows_len;/* count of flows in old list */ +__u32 ce_mark;/* packets above ce_threshold */ +__u32 memory_usage;/* in bytes */ +__u32 drop_overmemory; +}; + +struct tc_fq_codel_cl_stats { +__s32 deficit; +__u32 ldelay;/* in-queue delay seen by most recently +* dequeued packet +*/ +__u32 count; +__u32 lastcount; +__u32 dropping; +__s32 drop_next; +}; + +struct tc_fq_codel_xstats { +__u32 type; +union { +struct tc_fq_codel_qd_stats qdisc_stats; +struct tc_fq_codel_cl_stats class_stats; + }; +}; + +/* FQ */ + +enum { +TCA_FQ_UNSPEC , + +TCA_FQ_PLIMIT ,/* limit of total number of packets in queue */ + +TCA_FQ_FLOW_PLIMIT ,/* limit of packets per flow */ + +TCA_FQ_QUANTUM ,/* RR quantum */ + +TCA_FQ_INITIAL_QUANTUM ,/* RR quantum for new flow */ + +TCA_FQ_RATE_ENABLE ,/* enable/disable rate limiting */ + +TCA_FQ_FLOW_DEFAULT_RATE ,/* obsolete, do not use */ + +TCA_FQ_FLOW_MAX_RATE ,/* per flow max rate */ + +TCA_FQ_BUCKETS_LOG ,/* log2(number of buckets) */ + +TCA_FQ_FLOW_REFILL_DELAY ,/* flow credit refill delay in usec */ + +TCA_FQ_ORPHAN_MASK ,/* mask applied to orphaned skb hashes */ + +TCA_FQ_LOW_RATE_THRESHOLD ,/* per packet delay under this rate */ + +TCA_FQ_CE_THRESHOLD ,/* DCTCP-like CE-marking threshold */ + + __TCA_FQ_MAX +}; + +#define TCA_FQ_MAX (__TCA_FQ_MAX - 1) + +struct tc_fq_qd_stats { +__u64 gc_flows; +__u64 highprio_packets; +__u64 tcp_retrans; +__u64 throttled; +__u64 flows_plimit; +__u64 pkts_too_long; +__u64 allocation_errors; +__s64 time_next_delayed_flow; +__u32 flows; +__u32 inactive_flows; +__u32 throttled_flows; +__u32 unthrottle_latency_ns; +__u64 ce_mark;/* packets above ce_threshold */ +}; + +/* Heavy-Hitter Filter */ + +enum { +TCA_HHF_UNSPEC , +TCA_HHF_BACKLOG_LIMIT , +TCA_HHF_QUANTUM , +TCA_HHF_HH_FLOWS_LIMIT , +TCA_HHF_RESET_TIMEOUT , +TCA_HHF_ADMIT_BYTES , +TCA_HHF_EVICT_TIMEOUT , +TCA_HHF_NON_HH_WEIGHT , + __TCA_HHF_MAX +}; + +#define TCA_HHF_MAX (__TCA_HHF_MAX - 1) + +struct tc_hhf_xstats { +__u32 drop_overlimit;/* number of times max qdisc packet limit +* was hit +*/ +__u32 hh_overlimit;/* number of times max heavy-hitters was hit */ +__u32 hh_tot_count;/* number of captured heavy-hitters so far */ +__u32 hh_cur_count;/* number of current heavy-hitters */ +}; + +/* PIE */ +enum { +TCA_PIE_UNSPEC , +TCA_PIE_TARGET , +TCA_PIE_LIMIT , +TCA_PIE_TUPDATE , +TCA_PIE_ALPHA , +TCA_PIE_BETA , +TCA_PIE_ECN , +TCA_PIE_BYTEMODE , + __TCA_PIE_MAX +}; +#define TCA_PIE_MAX (__TCA_PIE_MAX - 1) + +struct tc_pie_xstats { +__u32 prob;/* current probability */ +__u32 delay;/* current delay in ms */ +__u32 avg_dq_rate;/* current average dq_rate in bits/pie_time */ +__u32 packets_in;/* total number of packets enqueued */ +__u32 dropped;/* packets dropped due to pie_action */ +__u32 overlimit;/* dropped due to lack of space in queue */ +__u32 maxq;/* maximum queue size */ +__u32 ecn_mark;/* packets marked with ecn*/ +}; + +/* CBS */ +struct tc_cbs_qopt { +__u8 offload; +__u8 _pad[3 ]; +__s32 hicredit; +__s32 locredit; +__s32 idleslope; +__s32 sendslope; +}; + +enum { +TCA_CBS_UNSPEC , +TCA_CBS_PARMS , + __TCA_CBS_MAX, +}; + +#define TCA_CBS_MAX (__TCA_CBS_MAX - 1) + + +/* ETF */ +struct tc_etf_qopt { +__s32 delta; +__s32 clockid; +__u32 flags; +#define TC_ETF_DEADLINE_MODE_ON BIT(0) +#define TC_ETF_OFFLOAD_ON BIT(1) +}; + +enum { +TCA_ETF_UNSPEC , +TCA_ETF_PARMS , + __TCA_ETF_MAX, +}; + +#define TCA_ETF_MAX (__TCA_ETF_MAX - 1) + + +/* CAKE */ +enum { +TCA_CAKE_UNSPEC , +TCA_CAKE_PAD , +TCA_CAKE_BASE_RATE64 , +TCA_CAKE_DIFFSERV_MODE , +TCA_CAKE_ATM , +TCA_CAKE_FLOW_MODE , +TCA_CAKE_OVERHEAD , +TCA_CAKE_RTT , +TCA_CAKE_TARGET , +TCA_CAKE_AUTORATE , +TCA_CAKE_MEMORY , +TCA_CAKE_NAT , +TCA_CAKE_RAW , +TCA_CAKE_WASH , +TCA_CAKE_MPU , +TCA_CAKE_INGRESS , +TCA_CAKE_ACK_FILTER , +TCA_CAKE_SPLIT_GSO , + __TCA_CAKE_MAX +}; +#define TCA_CAKE_MAX (__TCA_CAKE_MAX - 1) + +enum { + __TCA_CAKE_STATS_INVALID, +TCA_CAKE_STATS_PAD , +TCA_CAKE_STATS_CAPACITY_ESTIMATE64 , +TCA_CAKE_STATS_MEMORY_LIMIT , +TCA_CAKE_STATS_MEMORY_USED , +TCA_CAKE_STATS_AVG_NETOFF , +TCA_CAKE_STATS_MIN_NETLEN , +TCA_CAKE_STATS_MAX_NETLEN , +TCA_CAKE_STATS_MIN_ADJLEN , +TCA_CAKE_STATS_MAX_ADJLEN , +TCA_CAKE_STATS_TIN_STATS , +TCA_CAKE_STATS_DEFICIT , +TCA_CAKE_STATS_COBALT_COUNT , +TCA_CAKE_STATS_DROPPING , +TCA_CAKE_STATS_DROP_NEXT_US , +TCA_CAKE_STATS_P_DROP , +TCA_CAKE_STATS_BLUE_TIMER_US , + __TCA_CAKE_STATS_MAX +}; +#define TCA_CAKE_STATS_MAX (__TCA_CAKE_STATS_MAX - 1) + +enum { + __TCA_CAKE_TIN_STATS_INVALID, +TCA_CAKE_TIN_STATS_PAD , +TCA_CAKE_TIN_STATS_SENT_PACKETS , +TCA_CAKE_TIN_STATS_SENT_BYTES64 , +TCA_CAKE_TIN_STATS_DROPPED_PACKETS , +TCA_CAKE_TIN_STATS_DROPPED_BYTES64 , +TCA_CAKE_TIN_STATS_ACKS_DROPPED_PACKETS , +TCA_CAKE_TIN_STATS_ACKS_DROPPED_BYTES64 , +TCA_CAKE_TIN_STATS_ECN_MARKED_PACKETS , +TCA_CAKE_TIN_STATS_ECN_MARKED_BYTES64 , +TCA_CAKE_TIN_STATS_BACKLOG_PACKETS , +TCA_CAKE_TIN_STATS_BACKLOG_BYTES , +TCA_CAKE_TIN_STATS_THRESHOLD_RATE64 , +TCA_CAKE_TIN_STATS_TARGET_US , +TCA_CAKE_TIN_STATS_INTERVAL_US , +TCA_CAKE_TIN_STATS_WAY_INDIRECT_HITS , +TCA_CAKE_TIN_STATS_WAY_MISSES , +TCA_CAKE_TIN_STATS_WAY_COLLISIONS , +TCA_CAKE_TIN_STATS_PEAK_DELAY_US , +TCA_CAKE_TIN_STATS_AVG_DELAY_US , +TCA_CAKE_TIN_STATS_BASE_DELAY_US , +TCA_CAKE_TIN_STATS_SPARSE_FLOWS , +TCA_CAKE_TIN_STATS_BULK_FLOWS , +TCA_CAKE_TIN_STATS_UNRESPONSIVE_FLOWS , +TCA_CAKE_TIN_STATS_MAX_SKBLEN , +TCA_CAKE_TIN_STATS_FLOW_QUANTUM , + __TCA_CAKE_TIN_STATS_MAX +}; +#define TCA_CAKE_TIN_STATS_MAX (__TCA_CAKE_TIN_STATS_MAX - 1) +#define TC_CAKE_MAX_TINS (8) + +enum { +CAKE_FLOW_NONE =0 , +CAKE_FLOW_SRC_IP , +CAKE_FLOW_DST_IP , +CAKE_FLOW_HOSTS ,/* = CAKE_FLOW_SRC_IP | CAKE_FLOW_DST_IP */ +CAKE_FLOW_FLOWS , +CAKE_FLOW_DUAL_SRC ,/* = CAKE_FLOW_SRC_IP | CAKE_FLOW_FLOWS */ +CAKE_FLOW_DUAL_DST ,/* = CAKE_FLOW_DST_IP | CAKE_FLOW_FLOWS */ +CAKE_FLOW_TRIPLE ,/* = CAKE_FLOW_HOSTS | CAKE_FLOW_FLOWS */ +CAKE_FLOW_MAX , +}; + +enum { +CAKE_DIFFSERV_DIFFSERV3 =0 , +CAKE_DIFFSERV_DIFFSERV4 , +CAKE_DIFFSERV_DIFFSERV8 , +CAKE_DIFFSERV_BESTEFFORT , +CAKE_DIFFSERV_PRECEDENCE , +CAKE_DIFFSERV_MAX +}; + +enum { +CAKE_ACK_NONE =0 , +CAKE_ACK_FILTER , +CAKE_ACK_AGGRESSIVE , +CAKE_ACK_MAX +}; + +enum { +CAKE_ATM_NONE =0 , +CAKE_ATM_ATM , +CAKE_ATM_PTM , +CAKE_ATM_MAX +}; + + +/* TAPRIO */ +enum { +TC_TAPRIO_CMD_SET_GATES =0x00 , +TC_TAPRIO_CMD_SET_AND_HOLD =0x01 , +TC_TAPRIO_CMD_SET_AND_RELEASE =0x02 , +}; + +enum { +TCA_TAPRIO_SCHED_ENTRY_UNSPEC , +TCA_TAPRIO_SCHED_ENTRY_INDEX ,/* u32 */ +TCA_TAPRIO_SCHED_ENTRY_CMD ,/* u8 */ +TCA_TAPRIO_SCHED_ENTRY_GATE_MASK ,/* u32 */ +TCA_TAPRIO_SCHED_ENTRY_INTERVAL ,/* u32 */ + __TCA_TAPRIO_SCHED_ENTRY_MAX, +}; +#define TCA_TAPRIO_SCHED_ENTRY_MAX (__TCA_TAPRIO_SCHED_ENTRY_MAX - 1) + +/* The format for schedule entry list is: +* [TCA_TAPRIO_SCHED_ENTRY_LIST] +* [TCA_TAPRIO_SCHED_ENTRY] +* [TCA_TAPRIO_SCHED_ENTRY_CMD] +* [TCA_TAPRIO_SCHED_ENTRY_GATES] +* [TCA_TAPRIO_SCHED_ENTRY_INTERVAL] +*/ +enum { +TCA_TAPRIO_SCHED_UNSPEC , +TCA_TAPRIO_SCHED_ENTRY , + __TCA_TAPRIO_SCHED_MAX, +}; + +#define TCA_TAPRIO_SCHED_MAX (__TCA_TAPRIO_SCHED_MAX - 1) + +enum { +TCA_TAPRIO_ATTR_UNSPEC , +TCA_TAPRIO_ATTR_PRIOMAP ,/* struct tc_mqprio_qopt */ +TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST ,/* nested of entry */ +TCA_TAPRIO_ATTR_SCHED_BASE_TIME ,/* s64 */ +TCA_TAPRIO_ATTR_SCHED_SINGLE_ENTRY ,/* single entry */ +TCA_TAPRIO_ATTR_SCHED_CLOCKID ,/* s32 */ +TCA_TAPRIO_PAD , + __TCA_TAPRIO_ATTR_MAX, +}; + +#define TCA_TAPRIO_ATTR_MAX (__TCA_TAPRIO_ATTR_MAX - 1) + +#endif
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 120/183 net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7fdc1adc52d3975740547a78c2df329bb207f15d ]
For representors, the TX dropped counter is not folded from the per-ring counters. Fix it.
--- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +1 -0
@@ -143,6 +143,7 @@ static void mlx5e_rep_update_sw_counters(struct mlx5e_priv *priv) s->tx_packets += sq_stats->packets; s->tx_bytes += sq_stats->bytes; + s->tx_queue_dropped += sq_stats->dropped; } } }
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 121/183 isdn: avm: Fix string plus integer warning from Clang
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
[ Upstream commit 7afa81c55fca0cad589722cb4bce698b4803b0e1 ]
A recent commit in Clang expanded the -Wstring-plus-int warning, showing some odd behavior in this file.
drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
cinfo->version[j] = "\0\0" + 1;
~~~~~~~^~~
drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning
cinfo->version[j] = "\0\0" + 1;
^
& [ ]1 warning generated.
This is equivalent to just "\0". Nick pointed out that it is smarter to use "" instead of "\0" because "" is used elsewhere in the kernel and can be deduplicated at the linking stage.
--- drivers/isdn/hardware/avm/b1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/isdn/hardware/avm/b1.c +1 -1
@@ -423,7 +423,7 @@ void b1_parse_version(avmctrl_info *cinfo)int i, j;for (j =0 ; j <AVM_MAXVERSION ; j++) - cinfo->version[j] ="\0\0" +1 ; + cinfo->version[j] ="" ;for (i =0 , j =0 ; j <AVM_MAXVERSION && i < cinfo->versionlen; j++, i += cinfo->versionbuf[i] +1 )
Signature · 1 line
2.19.1
Greg Kroah-Hartman
maintainerPATCH 122/183 batman-adv: fix uninit-value in batadv_interface_tx()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 4ffcbfac60642f63ae3d80891f573ba7e94a265c ]
KMSAN reported batadv_interface_tx() was possibly using a garbage value [1]
batadv_get_vid() does have a pskb_may_pull() call but batadv_interface_tx() does not actually make sure this did not fail.
[1]
BUG: KMSAN: uninit-value in batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 CPU: 0 PID: 10006 Comm: syz-executor469 Not tainted 4.20.0-rc7+ #5 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 batadv_interface_tx+0x908/0x1e40 net/batman-adv/soft-interface.c:231 __netdev_start_xmit include/linux/netdevice.h:4356 [inline] netdev_start_xmit include/linux/netdevice.h:4365 [inline] xmit_one net/core/dev.c:3257 [inline] dev_hard_start_xmit+0x607/0xc40 net/core/dev.c:3273 __dev_queue_xmit+0x2e42/0x3bc0 net/core/dev.c:3843 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3876 packet_snd net/packet/af_packet.c:2928 [inline] packet_sendmsg+0x8306/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 RIP: 0033:0x441889 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 bb 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffdda6fd468 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 0000000000441889 RDX: 000000000000000e RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007ffdda6fd4c0 R13: 00007ffdda6fd4b0 R14: 0000000000000000 R15: 0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline] kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158 kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176 kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2759 [inline] __kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383 __kmalloc_reserve net/core/skbuff.c:137 [inline] __alloc_skb+0x309/0xa20 net/core/skbuff.c:205 alloc_skb include/linux/skbuff.h:998 [inline] alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5220 sock_alloc_send_pskb+0xafd/0x10e0 net/core/sock.c:2083 packet_alloc_skb net/packet/af_packet.c:2781 [inline] packet_snd net/packet/af_packet.c:2872 [inline] packet_sendmsg+0x661a/0x8f30 net/packet/af_packet.c:2953 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg net/socket.c:631 [inline] __sys_sendto+0x8c4/0xac0 net/socket.c:1788 __do_sys_sendto net/socket.c:1800 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:1796 __x64_sys_sendto+0x6e/0x90 net/socket.c:1796 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7
--- net/batman-adv/soft-interface.c | 2 ++ 1 file changed, 2 insertions(+)
net/batman-adv/soft-interface.c +2 -0
@@ -227,6 +227,8 @@ static netdev_tx_t batadv_interface_tx(sswitch (ntohs (ethhdr->h_proto)) {case ETH_P_8021Q : +if (!pskb_may_pull (skb,sizeof (*vhdr))) + goto dropped; vhdr =vlan_eth_hdr (skb);/* drop batman-in-batman packets to prevent loops */
Greg Kroah-Hartman
maintainerPATCH 123/183 inet_diag: fix reporting cgroup classid and fallback to priority
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Konstantin Khlebnikov <[email protected]>
[ Upstream commit 1ec17dbd90f8b638f41ee650558609c1af63dfa0 ]
Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested extensions has only 8 bits. Thus extensions starting from DCTCPINFO cannot be requested directly. Some of them included into response unconditionally or hook into some of lower 8 bits.
Extension INET_DIAG_CLASS_ID has not way to request from the beginning.
This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space reservation, and documents behavior for other extensions.
Also this patch adds fallback to reporting socket priority. This filed is more widely used for traffic classification because ipv4 sockets automatically maps TOS to priority and default qdisc pfifo_fast knows about that. But priority could be changed via setsockopt SO_PRIORITY so INET_DIAG_TOS isn't enough for predicting class.
Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen).
So, after this patch INET_DIAG_CLASS_ID will report socket priority for most common setup when net_cls isn't set and/or cgroup2 in use.
--- include/uapi/linux/inet_diag.h | 16 +++++++++++----- net/ipv4/inet_diag.c | 10 +++++++++- net/sctp/diag.c | 1 + 3 files changed, 21 insertions(+), 6 deletions(-)
include/uapi/linux/inet_diag.h +11 -5
@@ -137,15 +137,21 @@ enum {INET_DIAG_TCLASS ,INET_DIAG_SKMEMINFO ,INET_DIAG_SHUTDOWN , -INET_DIAG_DCTCPINFO , -INET_DIAG_PROTOCOL ,/* response attribute only */ + +/* +* Next extenstions cannot be requested in struct inet_diag_req_v2: +* its field idiag_ext has only 8 bits. +*/ + +INET_DIAG_DCTCPINFO ,/* request as INET_DIAG_VEGASINFO */ +INET_DIAG_PROTOCOL ,/* response attribute only */ INET_DIAG_SKV6ONLY ,INET_DIAG_LOCALS ,INET_DIAG_PEERS ,INET_DIAG_PAD , -INET_DIAG_MARK , -INET_DIAG_BBRINFO , -INET_DIAG_CLASS_ID , +INET_DIAG_MARK ,/* only with CAP_NET_ADMIN */ +INET_DIAG_BBRINFO ,/* request as INET_DIAG_VEGASINFO */ +INET_DIAG_CLASS_ID ,/* request as INET_DIAG_TCLASS */ INET_DIAG_MD5SIG , __INET_DIAG_MAX, };
net/ipv4/inet_diag.c +9 -1
@@ -108,6 +108,7 @@ static size_t inet_sk_attr_size(struct s +nla_total_size (1 )/* INET_DIAG_TOS */ +nla_total_size (1 )/* INET_DIAG_TCLASS */ +nla_total_size (4 )/* INET_DIAG_MARK */ + +nla_total_size (4 )/* INET_DIAG_CLASS_ID */ +nla_total_size (sizeof (struct inet_diag_meminfo )) +nla_total_size (sizeof (struct inet_diag_msg )) +nla_total_size (SK_MEMINFO_VARS *sizeof (u32))
@@ -287,12 +288,19 @@ int inet_sk_diag_fill(struct sock *sk, s goto errout; } -if (ext & (1 << (INET_DIAG_CLASS_ID -1 ))) { +if (ext & (1 << (INET_DIAG_CLASS_ID -1 )) || + ext & (1 << (INET_DIAG_TCLASS -1 ))) {u32 classid =0 ;#ifdef CONFIG_SOCK_CGROUP_DATA classid =sock_cgroup_classid (&sk->sk_cgrp_data);#endif +/* Fallback to socket priority if class id isn't set. +* Classful qdiscs use it as direct reference to class. +* For cgroup2 classid is always zero. +*/ +if (!classid) + classid = sk->sk_priority;if (nla_put_u32 (skb,INET_DIAG_CLASS_ID , classid)) goto errout;
net/sctp/diag.c +1 -0
@@ -256,6 +256,7 @@ static size_t inet_assoc_attr_size(struc +nla_total_size (1 )/* INET_DIAG_TOS */ +nla_total_size (1 )/* INET_DIAG_TCLASS */ +nla_total_size (4 )/* INET_DIAG_MARK */ + +nla_total_size (4 )/* INET_DIAG_CLASS_ID */ +nla_total_size (addrlen * asoc->peer.transport_count) +nla_total_size (addrlen * addrcnt) +nla_total_size (sizeof (struct inet_diag_meminfo ))
Greg Kroah-Hartman
maintainerPATCH 124/183 ipv6: propagate genlmsg_reply return code
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Li RongQing <[email protected]>
[ Upstream commit d1f20798a119be71746949ba9b2e2ff330fdc038 ]
genlmsg_reply can fail, so propagate its return code
--- net/ipv6/seg6.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
net/ipv6/seg6.c +1 -3
@@ -221,9 +221,7 @@ static int seg6_genl_get_tunsrc(struct srcu_read_unlock ();genlmsg_end (msg, hdr); -genlmsg_reply (msg, info); - -return 0 ; +return genlmsg_reply (msg, info); nla_put_failure:rcu_read_unlock ();
Greg Kroah-Hartman
maintainerPATCH 125/183 net: ena: fix race between link up and device initalization
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arthur Kiyanovski <[email protected]>
[ Upstream commit e1f1bd9bfbedcfce428ee7e1b82a6ec12d4c3863 ]
Fix race condition between ena_update_on_link_change() and ena_restore_device().
This race can occur if link notification arrives while the driver is performing a reset sequence. In this case link can be set up, enabling the device, before it is fully restored. If packets are sent at this time, the driver might access uninitialized data structures, causing kernel crash.
Move the clearing of ENA_FLAG_ONGOING_RESET and netif_carrier_on() after ena_up() to ensure the device is ready when link is set up.
--- drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/ethernet/amazon/ena/ena_netdev.c +5 -5
@@ -2663,11 +2663,6 @@ static int ena_restore_device(struct ena goto err_device_destroy; } -clear_bit (ENA_FLAG_ONGOING_RESET , &adapter->flags); -/* Make sure we don't have a race with AENQ Links state handler */ -if (test_bit (ENA_FLAG_LINK_UP , &adapter->flags)) -netif_carrier_on (adapter->netdev); - rc =ena_enable_msix_and_set_admin_interrupts (adapter, adapter->num_queues);if (rc) {
@@ -2684,6 +2679,11 @@ static int ena_restore_device(struct ena }set_bit (ENA_FLAG_DEVICE_RUNNING , &adapter->flags); + +clear_bit (ENA_FLAG_ONGOING_RESET , &adapter->flags); +if (test_bit (ENA_FLAG_LINK_UP , &adapter->flags)) +netif_carrier_on (adapter->netdev); +mod_timer (&adapter->timer_service,round_jiffies (jiffies +HZ )); dev_err(&pdev->dev, "Device reset completed successfully, Driver info: %s\n",
Greg Kroah-Hartman
maintainerPATCH 126/183 net/mlx4_en: Force CHECKSUM_NONE for short ethernet frames
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Saeed Mahameed <[email protected]>
[ Upstream commit 29dded89e80e3fff61efb34f07a8a3fba3ea146d ]
When an ethernet frame is padded to meet the minimum ethernet frame size, the padding octets are not covered by the hardware checksum. Fortunately the padding octets are usually zero's, which don't affect checksum. However, it is not guaranteed. For example, switches might choose to make other use of these octets.
This repeatedly causes kernel hardware checksum fault.
Prior to the cited commit below, skb checksum was forced to be CHECKSUM_NONE when padding is detected. After it, we need to keep skb->csum updated. However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP headers, it does not worth the effort as the packets are so small that CHECKSUM_COMPLETE has no significant advantage.
Future work: when reporting checksum complete is not an option for IP non-TCP/UDP packets, we can actually fallback to report checksum unnecessary, by looking at cqe IPOK bit.
--- drivers/net/ethernet/mellanox/mlx4/en_rx.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx4/en_rx.c +19 -1
@@ -620,6 +620,8 @@ static int get_fixed_ipv6_csum(__wsum hw }#endif +#define short_frame (size) ((size) <= ETH_ZLEN + ETH_FCS_LEN) +/* We reach this function only after checking that any of * the (IPv4 | IPv6) bits are set in cqe->status. */
@@ -627,9 +629,20 @@ static int check_csum(struct mlx4_cqe *c netdev_features_t dev_features) {__wsum hw_checksum =0 ; +void *hdr; -void *hdr = (u8 *)va +sizeof (struct ethhdr ); +/* CQE csum doesn't cover padding octets in short ethernet +* frames. And the pad field is appended prior to calculating +* and appending the FCS field. +* +* Detecting these padded frames requires to verify and parse +* IP headers, so we simply force all those small frames to skip +* checksum complete. +*/ +if (short_frame (skb->len)) +return -EINVAL ; + hdr = (u8 *)va +sizeof (struct ethhdr ); hw_checksum =csum_unfold ((__force __sum16 )cqe->checksum); if (cqe->vlan_my_qpn & cpu_to_be32(MLX4_CQE_CVLAN_PRESENT_MASK) &&
@@ -822,6 +835,11 @@ xdp_drop_no_cnt:skb_record_rx_queue (skb, cq_ring);if (likely (dev->features &NETIF_F_RXCSUM )) { +/* TODO: For IP non TCP/UDP packets when csum complete is +* not an option (not supported or any other reason) we can +* actually check cqe IPOK status bit and report +* CHECKSUM_UNNECESSARY rather than CHECKSUM_NONE +*/ if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_TCP | MLX4_CQE_STATUS_UDP)) && (cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) &&
Greg Kroah-Hartman
maintainerPATCH 127/183 net/mlx5e: Dont overwrite pedit action when multiple pedit used
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tonghao Zhang <[email protected]>
[ Upstream commit 218d05ce326f9e1b40a56085431fa1068b43d5d9 ]
In some case, we may use multiple pedit actions to modify packets. The command shown as below: the last pedit action is effective.
$ tc filter add dev netdev_rep parent ffff: protocol ip prio 1 \ flower skip_sw ip_proto icmp dst_ip 3.3.3.3 \ action pedit ex munge ip dst set 192.168.1.100 pipe \ action pedit ex munge eth src set 00:00:00:00:00:01 pipe \ action pedit ex munge eth dst set 00:00:00:00:00:02 pipe \ action csum ip pipe \ action tunnel_key set src_ip 1.1.1.100 dst_ip 1.1.1.200 dst_port 4789 id 100 \ action mirred egress redirect dev vxlan0
To fix it, we add max_mod_hdr_actions to mlx5e_tc_flow_parse_attr struction, max_mod_hdr_actions will store the max pedit action number we support and num_mod_hdr_actions indicates how many pedit action we used, and store all pedit action to mod_hdr_actions.
--- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 25 ++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +15 -10
@@ -98,6 +98,7 @@ struct mlx5e_tc_flow_parse_attr {struct ip_tunnel_info tun_info;struct mlx5_flow_spec spec;int num_mod_hdr_actions; +int max_mod_hdr_actions;void *mod_hdr_actions;int mirred_ifindex; };
@@ -1888,9 +1889,9 @@ static struct mlx5_fields fields[] = { OFFLOAD(UDP_DPORT, 2, udp.dest, 0), }; -/* On input attr->num_mod_hdr_actions tells how many HW actions can be parsed at -* max from the SW pedit action. On success, it says how many HW actions were -* actually parsed. +/* On input attr->max_mod_hdr_actions tells how many HW actions can be parsed at +* max from the SW pedit action. On success, attr->num_mod_hdr_actions +* says how many HW actions were actually parsed. */ static int offload_pedit_fields(struct pedit_headers *masks, struct pedit_headers *vals,
@@ -1914,9 +1915,11 @@ static int offload_pedit_fields(struct p add_vals = &vals[TCA_PEDIT_KEY_EX_CMD_ADD ]; action_size =MLX5_UN_SZ_BYTES (set_action_in_add_action_in_auto); - action = parse_attr->mod_hdr_actions; - max_actions = parse_attr->num_mod_hdr_actions; - nactions =0 ; + action = parse_attr->mod_hdr_actions + + parse_attr->num_mod_hdr_actions * action_size; + + max_actions = parse_attr->max_mod_hdr_actions; + nactions = parse_attr->num_mod_hdr_actions;for (i =0 ; i <ARRAY_SIZE (fields); i++) { f = &fields[i];
@@ -2027,7 +2030,7 @@ static int alloc_mod_hdr_actions(structif (!parse_attr->mod_hdr_actions)return -ENOMEM ; - parse_attr->num_mod_hdr_actions = max_actions; + parse_attr->max_mod_hdr_actions = max_actions;return 0 ; }
@@ -2073,9 +2076,11 @@ static int parse_tc_pedit_action(struct goto out_err; } - err =alloc_mod_hdr_actions (priv, a, namespace, parse_attr); -if (err) - goto out_err; +if (!parse_attr->mod_hdr_actions) { + err =alloc_mod_hdr_actions (priv, a, namespace, parse_attr); +if (err) + goto out_err; + } err =offload_pedit_fields (masks, vals, parse_attr, extack);if (err <0 )
Greg Kroah-Hartman
maintainerPATCH 128/183 net/packet: fix 4gb buffer limit due to overflow check
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kal Conley <[email protected]>
[ Upstream commit fc62814d690cf62189854464f4bd07457d5e9e50 ]
When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Check it for overflow without limiting the total buffer size to UINT_MAX.
This change fixes support for packet ring buffers >= UINT_MAX.
--- net/packet/af_packet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/packet/af_packet.c +1 -1
@@ -4292,7 +4292,7 @@ static int packet_set_ring(struct sock * rb->frames_per_block = req->tp_block_size / req->tp_frame_size;if (unlikely (rb->frames_per_block ==0 )) goto out; -if (unlikely (req->tp_block_size >UINT_MAX / req->tp_block_nr)) +if (unlikely (rb->frames_per_block >UINT_MAX / req->tp_block_nr)) goto out;if (unlikely ((rb->frames_per_block * req->tp_block_nr) != req->tp_frame_nr))
Greg Kroah-Hartman
maintainerPATCH 129/183 net: sfp: do not probe SFP module before were attached
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
[ Upstream commit b5bfc21af5cb3d53f9cee0ef82eaa43762a90f81 ]
When we probe a SFP module, we expect to be able to call the upstream device's module_insert() function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose the module_insert() call.
Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver.
--- drivers/net/phy/sfp-bus.c | 2 ++ drivers/net/phy/sfp.c | 30 +++++++++++++++++++++--------- drivers/net/phy/sfp.h | 2 ++ 3 files changed, 25 insertions(+), 9 deletions(-)
drivers/net/phy/sfp-bus.c +2 -0
@@ -347,6 +347,7 @@ static int sfp_register_bus(struct sfp_breturn ret; } } + bus->socket_ops->attach (bus->sfp);if (bus->started) bus->socket_ops->start (bus->sfp); bus->netdev->sfp_bus = bus;
@@ -362,6 +363,7 @@ static void sfp_unregister_bus(struct sfif (bus->registered) {if (bus->started) bus->socket_ops->stop (bus->sfp); + bus->socket_ops->detach (bus->sfp);if (bus->phydev && ops && ops->disconnect_phy) ops->disconnect_phy (bus->upstream); }
drivers/net/phy/sfp.c +21 -9
@@ -184,6 +184,7 @@ struct sfp {struct gpio_desc *gpio[GPIO_MAX ]; +bool attached;unsigned int state;struct delayed_work poll;struct delayed_work timeout;
@@ -1475,7 +1476,7 @@ static void sfp_sm_event(struct sfp *sfp*/ switch (sfp->sm_mod_state) {default : -if (event ==SFP_E_INSERT ) { +if (event ==SFP_E_INSERT && sfp->attached) {sfp_module_tx_disable (sfp);sfp_sm_ins_next (sfp,SFP_MOD_PROBE ,T_PROBE_INIT ); }
@@ -1607,6 +1608,19 @@ static void sfp_sm_event(struct sfp *sfpmutex_unlock (&sfp->sm_mutex); } +static void sfp_attach (struct sfp *sfp) +{ + sfp->attached = true; +if (sfp->state &SFP_F_PRESENT ) +sfp_sm_event (sfp,SFP_E_INSERT ); +} + +static void sfp_detach (struct sfp *sfp) +{ + sfp->attached = false; +sfp_sm_event (sfp,SFP_E_REMOVE ); +} +static void sfp_start (struct sfp *sfp) {sfp_sm_event (sfp,SFP_E_DEV_UP );
@@ -1667,6 +1681,8 @@ static int sfp_module_eeprom(struct sfp }static const struct sfp_socket_ops sfp_module_ops = { + .attach = sfp_attach, + .detach = sfp_detach, .start = sfp_start, .stop = sfp_stop, .module_info = sfp_module_info,
@@ -1834,10 +1850,6 @@ static int sfp_probe(struct platform_devdev_info (sfp->dev,"Host maximum power %u.%uW\n" , sfp->max_power_mW /1000 , (sfp->max_power_mW /100 ) %10 ); - sfp->sfp_bus =sfp_register_socket (sfp->dev, sfp, &sfp_module_ops); -if (!sfp->sfp_bus) -return -ENOMEM ; -/* Get the initial state, and always signal TX disable, * since the network interface will not be up. */
@@ -1848,10 +1860,6 @@ static int sfp_probe(struct platform_dev sfp->state |=SFP_F_RATE_SELECT ;sfp_set_state (sfp, sfp->state);sfp_module_tx_disable (sfp); -rtnl_lock (); -if (sfp->state &SFP_F_PRESENT ) -sfp_sm_event (sfp,SFP_E_INSERT ); -rtnl_unlock ();for (i =0 ; i <GPIO_MAX ; i++) {if (gpio_flags[i] !=GPIOD_IN || !sfp->gpio[i])
@@ -1884,6 +1892,10 @@ static int sfp_probe(struct platform_devdev_warn (sfp->dev,"No tx_disable pin: SFP modules will always be emitting.\n" ); + sfp->sfp_bus =sfp_register_socket (sfp->dev, sfp, &sfp_module_ops); +if (!sfp->sfp_bus) +return -ENOMEM ; +return 0 ; }
drivers/net/phy/sfp.h +2 -0
@@ -7,6 +7,8 @@struct sfp ;struct sfp_socket_ops { +void (*attach)(struct sfp *sfp); +void (*detach)(struct sfp *sfp);void (*start)(struct sfp *sfp);void (*stop)(struct sfp *sfp);int (*module_info)(struct sfp *sfp,struct ethtool_modinfo *modinfo);
Sasha Levin
maintainerRe: [PATCH 4.20 129/183] net: sfp: do not probe SFP module before were attached
Quoted 14 lines · Greg Kroah-Hartman
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
[ Upstream commit
b5bfc21af5cb3d53f9cee0ef82eaa43762a90f81]When we probe a SFP module, we expect to be able to call the upstream device's
module_insert()function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose themodule_insert()call.
Quoted 7 lines
Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver.
Signed-off-by Russell King <[email protected]>Signed-off-by David S. Miller <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>
This one got fixed by 87454b6edc1b0143fdb3d9853285477e95af74a4 .
--
Thanks,
Sasha
Greg Kroah-Hartman
maintainerRe: [PATCH 4.20 129/183] net: sfp: do not probe SFP module before were attached
Quoted 19 lines · Sasha Levin
Quoted 18 lines · Greg Kroah-Hartman
4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Russell King <[email protected]>
[ Upstream commit
b5bfc21af5cb3d53f9cee0ef82eaa43762a90f81]When we probe a SFP module, we expect to be able to call the upstream device's
module_insert()function so that the upstream link can be configured. However, when the upstream device is delayed, we currently may end up probing the module before the upstream device is available, and lose themodule_insert()call.Avoid this by holding off probing the module until the SFP bus is properly connected to both the SFP socket driver and the upstream driver.
Quoted 5 lines
Quoted 3 lines
Signed-off-by Russell King <[email protected]>Signed-off-by David S. Miller <[email protected]>Signed-off-by Greg Kroah-Hartman <[email protected]>This one got fixed by
87454b6edc1b0143fdb3d9853285477e95af74a4.
Thanks for catching this, I'll go queue this up now.
greg k-h
Greg Kroah-Hartman
maintainerPATCH 130/183 sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit fc228abc2347e106a44c0e9b29ab70b712c4ca51 ]
Jianlin reported a panic when running sctp gso over gre over vlan device:
[ 84.772930] RIP: 0010:do_csum+0x6d/0x170 [ 84.790605] Call Trace: [ 84.791054] csum_partial+0xd/0x20 [ 84.791657] gre_gso_segment+0x2c3/0x390 [ 84.792364] inet_gso_segment+0x161/0x3e0 [ 84.793071] skb_mac_gso_segment+0xb8/0x120 [ 84.793846] __skb_gso_segment+0x7e/0x180 [ 84.794581] validate_xmit_skb+0x141/0x2e0 [ 84.795297] __dev_queue_xmit+0x258/0x8f0 [ 84.795949] ? eth_header+0x26/0xc0 [ 84.796581] ip_finish_output2+0x196/0x430 [ 84.797295] ? skb_gso_validate_network_len+0x11/0x80 [ 84.798183] ? ip_finish_output+0x169/0x270 [ 84.798875] ip_output+0x6c/0xe0 [ 84.799413] ? ip_append_data.part.50+0xc0/0xc0 [ 84.800145] iptunnel_xmit+0x144/0x1c0 [ 84.800814] ip_tunnel_xmit+0x62d/0x930 [ip_tunnel] [ 84.801699] gre_tap_xmit+0xac/0xf0 [ip_gre] [ 84.802395] dev_hard_start_xmit+0xa5/0x210 [ 84.803086] sch_direct_xmit+0x14f/0x340 [ 84.803733] __dev_queue_xmit+0x799/0x8f0 [ 84.804472] ip_finish_output2+0x2e0/0x430 [ 84.805255] ? skb_gso_validate_network_len+0x11/0x80 [ 84.806154] ip_output+0x6c/0xe0 [ 84.806721] ? ip_append_data.part.50+0xc0/0xc0 [ 84.807516] sctp_packet_transmit+0x716/0xa10 [sctp] [ 84.808337] sctp_outq_flush+0xd7/0x880 [sctp]
It was caused by SKB_GSO_CB(skb)->csum_start not set in sctp_gso_segment. sctp_gso_segment() calls skb_segment() with 'feature | NETIF_F_HW_CSUM', which causes SKB_GSO_CB(skb)->csum_start not to be set in skb_segment().
For TCP/UDP, when feature supports HW_CSUM, CHECKSUM_PARTIAL will be set and gso_reset_checksum will be called to set SKB_GSO_CB(skb)->csum_start.
So SCTP should do the same as TCP/UDP, to call gso_reset_checksum() when computing checksum in sctp_gso_segment.
--- net/sctp/offload.c | 1 + 1 file changed, 1 insertion(+)
net/sctp/offload.c +1 -0
@@ -36,6 +36,7 @@ static __le32 sctp_gso_make_checksum(str { skb->ip_summed =CHECKSUM_NONE ; skb->csum_not_inet =0 ; +gso_reset_checksum (skb, ~0 );return sctp_compute_cksum (skb,skb_transport_offset (skb)); }
Greg Kroah-Hartman
maintainerPATCH 131/183 sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Xin Long <[email protected]>
[ Upstream commit af98c5a78517c04adb5fd68bb64b1ad6fe3d473f ]
In sctp_stream_init(), after sctp_stream_outq_migrate() freed the surplus streams' ext, but sctp_stream_alloc_out() returns -ENOMEM, stream->outcnt will not be set to 'outcnt'.
With the bigger value on stream->outcnt, when closing the assoc and freeing its streams, the ext of those surplus streams will be freed again since those stream exts were not set to NULL after freeing in sctp_stream_outq_migrate(). Then the invalid-free issue reported by syzbot would be triggered.
We fix it by simply setting them to NULL after freeing.
--- net/sctp/stream.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
net/sctp/stream.c +3 -1
@@ -144,8 +144,10 @@ static void sctp_stream_outq_migrate(str } } -for (i = outcnt; i < stream->outcnt; i++) +for (i = outcnt; i < stream->outcnt; i++) {kfree (SCTP_SO (stream, i)->ext); +SCTP_SO (stream, i)->ext =NULL ; + } } static int sctp_stream_alloc_out(struct sctp_stream *stream, __u16 outcnt,
Greg Kroah-Hartman
maintainerPATCH 132/183 team: avoid complex list operations in team_nl_cmd_options_set()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit 2fdeee2549231b1f989f011bb18191f5660d3745 ]
The current opt_inst_list operations inside team_nl_cmd_options_set() is too complex to track:
LIST_HEAD(opt_inst_list);
nla_for_each_nested(...) {
list_for_each_entry(opt_inst, &team->option_inst_list, list) {
if (__team_option_inst_tmp_find(&opt_inst_list, opt_inst))
continue;
list_add(&opt_inst->tmp_list, &opt_inst_list);
}
}
team_nl_send_event_options_get(team, &opt_inst_list);as while we retrieve 'opt_inst' from team->option_inst_list, it could be added to the local 'opt_inst_list' for multiple times. The __team_option_inst_tmp_find() doesn't work, as the setter team_mode_option_set() still calls team->ops.exit() which uses ->tmp_list too in __team_options_change_check().
Simplify the list operations by moving the 'opt_inst_list' and team_nl_send_event_options_get() into the nla_for_each_nested() loop so that it can be guranteed that we won't insert a same list entry for multiple times. Therefore, __team_option_inst_tmp_find() can be removed too.
--- drivers/net/team/team.c | 27 +++++---------------------- 1 file changed, 5 insertions(+), 22 deletions(-)
drivers/net/team/team.c +5 -22
@@ -256,17 +256,6 @@ static void __team_option_inst_mark_remo } } -static bool __team_option_inst_tmp_find (const struct list_head *opts, -const struct team_option_inst *needle) -{ -struct team_option_inst *opt_inst; - -list_for_each_entry (opt_inst, opts, tmp_list) -if (opt_inst == needle) -return true; -return false; -} -static int __team_options_register (struct team *team,const struct team_option *option,size_t option_count)
@@ -2460,7 +2449,6 @@ static int team_nl_cmd_options_set(strucint err =0 ;int i;struct nlattr *nl_option; -LIST_HEAD (opt_inst_list);rtnl_lock ();
@@ -2480,6 +2468,7 @@ static int team_nl_cmd_options_set(strucstruct nlattr *opt_attrs[TEAM_ATTR_OPTION_MAX +1 ];struct nlattr *attr;struct nlattr *attr_data; +LIST_HEAD (opt_inst_list);enum team_option_type opt_type;int opt_port_ifindex =0 ;/* != 0 for per-port options */ u32 opt_array_index =0 ;
@@ -2584,23 +2573,17 @@ static int team_nl_cmd_options_set(strucif (err) goto team_put; opt_inst->changed = true; - -/* dumb/evil user-space can send us duplicate opt, -* keep only the last one -*/ -if (__team_option_inst_tmp_find (&opt_inst_list, - opt_inst)) -continue ; -list_add (&opt_inst->tmp_list, &opt_inst_list); }if (!opt_found) { err = -ENOENT ; goto team_put; } - } - err =team_nl_send_event_options_get (team, &opt_inst_list); + err =team_nl_send_event_options_get (team, &opt_inst_list); +if (err) +break ; + } team_put:team_nl_team_put (team);
Greg Kroah-Hartman
maintainerPATCH 133/183 net: dsa: Fix NPD checking for br_vlan_enabled()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <[email protected]>
[ Upstream not applicable ]
It is possible for the DSA slave network device not to be part of a bridge, yet have an upper device like a VLAN device be part of a bridge. When that VLAN device is enslaved, since it does not define any switchdev_ops, we will recurse down to the lower/physical port device, call switchdev_port_obj_add() with a VLAN, and here we will check br_vlan_enabled() on a NULL dp->bridge_dev, thus causing a NULL pointer de-reference.
This is no longer a problem upstream after commit d17d9f5e5143 ("switchdev: Replace port obj add/del SDO with a notification").
--- net/dsa/port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
net/dsa/port.c +2 -2
@@ -255,7 +255,7 @@ int dsa_port_vlan_add(struct dsa_port *dif (netif_is_bridge_master (vlan->obj.orig_dev))return -EOPNOTSUPP ; -if (br_vlan_enabled (dp->bridge_dev)) +if (dp->bridge_dev &&br_vlan_enabled (dp->bridge_dev))return dsa_port_notify (dp,DSA_NOTIFIER_VLAN_ADD , &info);return 0 ;
@@ -273,7 +273,7 @@ int dsa_port_vlan_del(struct dsa_port *dif (netif_is_bridge_master (vlan->obj.orig_dev))return -EOPNOTSUPP ; -if (br_vlan_enabled (dp->bridge_dev)) +if (dp->bridge_dev &&br_vlan_enabled (dp->bridge_dev))return dsa_port_notify (dp,DSA_NOTIFIER_VLAN_DEL , &info);return 0 ;
Greg Kroah-Hartman
maintainerPATCH 134/183 Revert "socket: fix struct ifreq size in compat ioctl"
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
[ Upstream commit 63ff03ab786ab1bc6cca01d48eacd22c95b9b3eb ]
This reverts commit 1cebf8f143c2 ("socket: fix struct ifreq size in compat ioctl"), it's a bugfix for another commit that I'll revert next.
This is not a 'perfect' revert, I'm keeping some coding style intact rather than revert to the state with indentation errors.
--- net/socket.c | 22 ++++++++-------------- 1 file changed, 8 insertions(+), 14 deletions(-)
net/socket.c +8 -14
@@ -941,8 +941,7 @@ void dlci_ioctl_set(int (*hook) (unsigneEXPORT_SYMBOL (dlci_ioctl_set);static long sock_do_ioctl (struct net *net,struct socket *sock, -unsigned int cmd,unsigned long arg, -unsigned int ifreq_size) +unsigned int cmd,unsigned long arg) {int err;void __user *argp = (void __user *)arg;
@@ -968,11 +967,11 @@ static long sock_do_ioctl(struct net *ne }else {struct ifreq ifr;bool need_copyout; -if (copy_from_user (&ifr, argp, ifreq_size)) +if (copy_from_user (&ifr, argp,sizeof (struct ifreq )))return -EFAULT ; err =dev_ioctl (net, cmd, &ifr, &need_copyout);if (!err && need_copyout) -if (copy_to_user (argp, &ifr, ifreq_size)) +if (copy_to_user (argp, &ifr,sizeof (struct ifreq )))return -EFAULT ; }return err;
@@ -1071,8 +1070,7 @@ static long sock_ioctl(struct file *file err =open_related_ns (&net->ns, get_net_ns);break ;default : - err =sock_do_ioctl (net, sock, cmd, arg, -sizeof (struct ifreq )); + err =sock_do_ioctl (net, sock, cmd, arg);break ; }return err;
@@ -2750,8 +2748,7 @@ static int do_siocgstamp(struct net *netint err;set_fs (KERNEL_DS ); - err =sock_do_ioctl (net, sock, cmd, (unsigned long )&ktv, -sizeof (struct compat_ifreq )); + err =sock_do_ioctl (net, sock, cmd, (unsigned long )&ktv);set_fs (old_fs);if (!err) err =compat_put_timeval (&ktv, up);
@@ -2767,8 +2764,7 @@ static int do_siocgstampns(struct net *nint err;set_fs (KERNEL_DS ); - err =sock_do_ioctl (net, sock, cmd, (unsigned long )&kts, -sizeof (struct compat_ifreq )); + err =sock_do_ioctl (net, sock, cmd, (unsigned long )&kts);set_fs (old_fs);if (!err) err =compat_put_timespec (&kts, up);
@@ -3079,8 +3075,7 @@ static int routing_ioctl(struct net *net }set_fs (KERNEL_DS ); - ret =sock_do_ioctl (net, sock, cmd, (unsigned long ) r, -sizeof (struct compat_ifreq )); + ret =sock_do_ioctl (net, sock, cmd, (unsigned long ) r);set_fs (old_fs); out:
@@ -3193,8 +3188,7 @@ static int compat_sock_ioctl_trans(struccase SIOCBONDSETHWADDR :case SIOCBONDCHANGEACTIVE :case SIOCGIFNAME : -return sock_do_ioctl (net, sock, cmd, arg, -sizeof (struct compat_ifreq )); +return sock_do_ioctl (net, sock, cmd, arg); }return -ENOIOCTLCMD ;
Greg Kroah-Hartman
maintainerPATCH 135/183 Revert "kill dev_ifsioc()"
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
[ Upstream commit 37ac39bdddc528c998a9f36db36937de923fdf2a ]
This reverts commit bf4405737f9f ("kill dev_ifsioc()").
This wasn't really unused as implied by the original commit, it still handles the copy to/from user differently, and the commit thus caused issues such as
https://bugzilla.kernel.org/show_bug.cgi?id=199469
and
https://bugzilla.kernel.org/show_bug.cgi?id=202273
However, deviating from a strict revert, rename dev_ifsioc() to compat_ifreq_ioctl() to be clearer as to its purpose and add a comment.
--- net/socket.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
net/socket.c +49 -0
@@ -2960,6 +2960,53 @@ static int compat_ifr_data_ioctl(structreturn dev_ioctl (net, cmd, &ifreq,NULL ); } +static int compat_ifreq_ioctl (struct net *net,struct socket *sock, +unsigned int cmd, +struct compat_ifreq __user *uifr32) +{ +struct ifreq __user *uifr; +int err; + +/* Handle the fact that while struct ifreq has the same *layout* on +* 32/64 for everything but ifreq::ifru_ifmap and ifreq::ifru_data, +* which are handled elsewhere, it still has different *size* due to +* ifreq::ifru_ifmap (which is 16 bytes on 32 bit, 24 bytes on 64-bit, +* resulting in struct ifreq being 32 and 40 bytes respectively). +* As a result, if the struct happens to be at the end of a page and +* the next page isn't readable/writable, we get a fault. To prevent +* that, copy back and forth to the full size. +*/ + + uifr =compat_alloc_user_space (sizeof (*uifr)); +if (copy_in_user (uifr, uifr32,sizeof (*uifr32))) +return -EFAULT ; + + err =sock_do_ioctl (net, sock, cmd, (unsigned long )uifr); + +if (!err) { +switch (cmd) { +case SIOCGIFFLAGS : +case SIOCGIFMETRIC : +case SIOCGIFMTU : +case SIOCGIFMEM : +case SIOCGIFHWADDR : +case SIOCGIFINDEX : +case SIOCGIFADDR : +case SIOCGIFBRDADDR : +case SIOCGIFDSTADDR : +case SIOCGIFNETMASK : +case SIOCGIFPFLAGS : +case SIOCGIFTXQLEN : +case SIOCGMIIPHY : +case SIOCGMIIREG : +if (copy_in_user (uifr32, uifr,sizeof (*uifr32))) + err = -EFAULT ; +break ; + } + } +return err; +} +static int compat_sioc_ifmap (struct net *net,unsigned int cmd,struct compat_ifreq __user *uifr32) {
@@ -3179,6 +3226,8 @@ static int compat_sock_ioctl_trans(struccase SIOCGMIIPHY :case SIOCGMIIREG :case SIOCSMIIREG : +return compat_ifreq_ioctl (net, sock, cmd, argp); +case SIOCSARP :case SIOCGARP :case SIOCDARP :
Greg Kroah-Hartman
maintainerPATCH 136/183 net: socket: fix SIOCGIFNAME in compat
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
[ Upstream commit c6c9fee35dc27362b7bac34b2fc9f5b8ace2e22c ]
As reported by Robert O'Callahan in
https://bugzilla.kernel.org/show_bug.cgi?id=202273
reverting the previous changes in this area broke the SIOCGIFNAME ioctl in compat again (I'd previously fixed it after his previous report of breakage in
https://bugzilla.kernel.org/show_bug.cgi?id=199469).
This is obviously because I fixed SIOCGIFNAME more or less by accident.
Fix it explicitly now by making it pass through the restored compat translation code.
--- net/socket.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/socket.c +2 -1
@@ -2999,6 +2999,7 @@ static int compat_ifreq_ioctl(struct netcase SIOCGIFTXQLEN :case SIOCGMIIPHY :case SIOCGMIIREG : +case SIOCGIFNAME :if (copy_in_user (uifr32, uifr,sizeof (*uifr32))) err = -EFAULT ;break ;
@@ -3222,6 +3223,7 @@ static int compat_sock_ioctl_trans(struccase SIOCSIFTXQLEN :case SIOCBRADDIF :case SIOCBRDELIF : +case SIOCGIFNAME :case SIOCSIFNAME :case SIOCGMIIPHY :case SIOCGMIIREG :
@@ -3236,7 +3238,6 @@ static int compat_sock_ioctl_trans(struccase SIOCBONDRELEASE :case SIOCBONDSETHWADDR :case SIOCBONDCHANGEACTIVE : -case SIOCGIFNAME :return sock_do_ioctl (net, sock, cmd, arg); }
Greg Kroah-Hartman
maintainerPATCH 137/183 net: socket: make bond ioctls go through compat_ifreq_ioctl()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
[ Upstream commit 98406133dd9cb9f195676eab540c270dceca879a ]
Same story as before, these use struct ifreq and thus need to be read with the shorter version to not cause faults.
--- net/socket.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
net/socket.c +4 -4
@@ -3228,16 +3228,16 @@ static int compat_sock_ioctl_trans(struccase SIOCGMIIPHY :case SIOCGMIIREG :case SIOCSMIIREG : +case SIOCBONDENSLAVE : +case SIOCBONDRELEASE : +case SIOCBONDSETHWADDR : +case SIOCBONDCHANGEACTIVE :return compat_ifreq_ioctl (net, sock, cmd, argp);case SIOCSARP :case SIOCGARP :case SIOCDARP :case SIOCATMARK : -case SIOCBONDENSLAVE : -case SIOCBONDRELEASE : -case SIOCBONDSETHWADDR : -case SIOCBONDCHANGEACTIVE :return sock_do_ioctl (net, sock, cmd, arg); }
Greg Kroah-Hartman
maintainerPATCH 138/183 geneve: should not call rt6_lookup() when ipv6 was disabled
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
[ Upstream commit c0a47e44c0980b3b23ee31fa7936d70ea5dce491 ]
When we add a new GENEVE device with IPv6 remote, checking only for IS_ENABLED(CONFIG_IPV6) is not enough as we may disable IPv6 in the kernel command line (ipv6.disable=1), and calling rt6_lookup() would cause a NULL pointer dereference.
v2:
- don't mix declarations and code (reported by Stefano Brivio, Eric Dumazet)
- there's no need to use in6_dev_get() as we only need to check that idev exists (reported by David Ahern). This is under RTNL, so we can simply use __in6_dev_get() instead (Stefano, Eric).
--- drivers/net/geneve.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/net/geneve.c +7 -3
@@ -1426,9 +1426,13 @@ static void geneve_link_config(struct ne }#if IS_ENABLED (CONFIG_IPV6 )case AF_INET6 : { -struct rt6_info *rt =rt6_lookup (geneve->net, - &info->key.u.ipv6.dst,NULL ,0 , -NULL ,0 ); +struct rt6_info *rt; + +if (!__in6_dev_get (dev)) +break ; + + rt =rt6_lookup (geneve->net, &info->key.u.ipv6.dst,NULL ,0 , +NULL ,0 );if (rt && rt->dst.dev) ldev_mtu = rt->dst.dev->mtu -GENEVE_IPV6_HLEN ;
Greg Kroah-Hartman
maintainerPATCH 139/183 sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hangbin Liu <[email protected]>
[ Upstream commit 173656accaf583698bac3f9e269884ba60d51ef4 ]
If we disabled IPv6 from the kernel command line (ipv6.disable=1), we should not call ip6_err_gen_icmpv6_unreach(). This:
ip link add sit1 type sit local 192.0.2.1 remote 192.0.2.2 ttl 1 ip link set sit1 up
ip addr add 198.51.100.1/24 dev sit1
ping 198.51.100.2
if IPv6 is disabled at boot time, will crash the kernel.
v2: there's no need to use in6_dev_get(), use __in6_dev_get() instead,
as we only need to check that idev exists and we are under rcu_read_lock() (from netif_receive_skb_internal()).
--- net/ipv6/sit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv6/sit.c +2 -1
@@ -546,7 +546,8 @@ static int ipip6_err(struct sk_buff *skb } err =0 ; -if (!ip6_err_gen_icmpv6_unreach (skb, iph->ihl *4 , type, data_len)) +if (__in6_dev_get (skb->dev) && + !ip6_err_gen_icmpv6_unreach (skb, iph->ihl *4 , type, data_len)) goto out;if (t->parms.iph.daddr ==0 )
Greg Kroah-Hartman
maintainerPATCH 140/183 net_sched: fix a race condition in tcindex_destroy()
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit 8015d93ebd27484418d4952284fd02172fa4b0b2 ]
tcindex_destroy() invokes tcindex_destroy_element() via a walker to delete each filter result in its perfect hash table, and tcindex_destroy_element() calls tcindex_delete() which schedules tcf RCU works to do the final deletion work. Unfortunately this races with the RCU callback __tcindex_destroy(), which could lead to use-after-free as reported by Adrian.
Fix this by migrating this RCU callback to tcf RCU work too, as that workqueue is ordered, we will not have use-after-free.
Note, we don't need to hold netns refcnt because we don't call tcf_exts_destroy() here.
--- net/sched/cls_tcindex.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
net/sched/cls_tcindex.c +11 -7
@@ -48,7 +48,7 @@ struct tcindex_data {u32 hash;/* hash table size; 0 if undefined */ u32 alloc_hash;/* allocated size */ u32 fall_through;/* 0: only classify if explicit match */ -struct rcu_head rcu; +struct rcu_work rwork; };static inline int tcindex_filter_is_set (struct tcindex_filter_result *r)
@@ -229,9 +229,11 @@ static int tcindex_destroy_element(strucreturn tcindex_delete (tp, arg, &last,NULL ); } -static void __tcindex_destroy (struct rcu_head *head) +static void tcindex_destroy_work (struct work_struct *work) { - struct tcindex_data *p = container_of(head, struct tcindex_data, rcu); +struct tcindex_data *p =container_of (to_rcu_work (work), + struct tcindex_data, + rwork);kfree (p->perfect);kfree (p->h);
@@ -258,9 +260,11 @@ static int tcindex_filter_result_init(streturn tcf_exts_init (&r->exts,TCA_TCINDEX_ACT ,TCA_TCINDEX_POLICE ); } -static void __tcindex_partial_destroy (struct rcu_head *head) +static void tcindex_partial_destroy_work (struct work_struct *work) { - struct tcindex_data *p = container_of(head, struct tcindex_data, rcu); +struct tcindex_data *p =container_of (to_rcu_work (work), + struct tcindex_data, + rwork);kfree (p->perfect);kfree (p);
@@ -478,7 +482,7 @@ tcindex_set_parms(struct net *net, struc }if (oldp) -call_rcu (&oldp->rcu, __tcindex_partial_destroy); +tcf_queue_work (&oldp->rwork, tcindex_partial_destroy_work);return 0 ; errout_alloc:
@@ -570,7 +574,7 @@ static void tcindex_destroy(struct tcf_p walker.fn = tcindex_destroy_element;tcindex_walk (tp, &walker); -call_rcu (&p->rcu, __tcindex_destroy); +tcf_queue_work (&p->rwork, tcindex_destroy_work); }
Greg Kroah-Hartman
maintainerPATCH 141/183 net_sched: fix a memory leak in cls_tcindex
In reply to Greg Kroah-Hartman4.20-stable review patch. If anyone has any objections, please let me know.
------------------
From: Cong Wang <[email protected]>
[ Upstream commit 033b228e7f26b29ae37f8bfa1bc6b209a5365e9f ]
When tcindex_destroy() destroys all the filter results in the perfect hash table, it invokes the walker to delete each of them. However, results with class==0 are skipped in either tcindex_walk() or tcindex_delete(), which causes a memory leak reported by kmemleak.
This patch fixes it by skipping the walker and directly deleting these filter results so we don't miss any filter result.
As a result of this change, we have to initialize exts->net properly in tcindex_alloc_perfect_hash(). For net-next, we need to consider whether we should initialize ->net in tcf_exts_init() instead, before that just directly test CONFIG_NET_CLS_ACT=y.
--- net/sched/cls_tcindex.c | 46 ++++++++++++++++++++++++++++++---------------- 1 file changed, 30 insertions(+), 16 deletions(-)
net/sched/cls_tcindex.c +30 -16
@@ -221,14 +221,6 @@ found:return 0 ; } -static int tcindex_destroy_element (struct tcf_proto *tp, -void *arg,struct tcf_walker *walker) -{ -bool last; - -return tcindex_delete (tp, arg, &last,NULL ); -} -static void tcindex_destroy_work (struct work_struct *work) { struct tcindex_data *p = container_of(to_rcu_work(work),
@@ -279,7 +271,7 @@ static void tcindex_free_perfect_hash(stkfree (cp->perfect); } -static int tcindex_alloc_perfect_hash (struct tcindex_data *cp) +static int tcindex_alloc_perfect_hash (struct net *net,struct tcindex_data *cp) {int i, err =0 ;
@@ -293,6 +285,9 @@ static int tcindex_alloc_perfect_hash(st TCA_TCINDEX_ACT, TCA_TCINDEX_POLICE);if (err <0 ) goto errout; +#ifdef CONFIG_NET_CLS_ACT + cp->perfect[i].exts.net = net; +#endif }return 0 ;
@@ -341,7 +336,7 @@ tcindex_set_parms(struct net *net, strucif (p->perfect) {int i; -if (tcindex_alloc_perfect_hash (cp) <0 ) +if (tcindex_alloc_perfect_hash (net, cp) <0 ) goto errout;for (i =0 ; i < cp->hash; i++) cp->perfect[i].res = p->perfect[i].res;
@@ -410,7 +405,7 @@ tcindex_set_parms(struct net *net, struc err = -ENOMEM ;if (!cp->perfect && !cp->h) {if (valid_perfect_hash (cp)) { -if (tcindex_alloc_perfect_hash (cp) <0 ) +if (tcindex_alloc_perfect_hash (net, cp) <0 ) goto errout_alloc; balloc =1 ; }else {
@@ -566,13 +561,32 @@ static void tcindex_destroy(struct tcf_p struct netlink_ext_ack *extack) {struct tcindex_data *p =rtnl_dereference (tp->root); -struct tcf_walker walker; +int i;pr_debug ("tcindex_destroy(tp %p),p %p\n" , tp, p); - walker.count =0 ; - walker.skip =0 ; - walker.fn = tcindex_destroy_element; -tcindex_walk (tp, &walker); + +if (p->perfect) { +for (i =0 ; i < p->hash; i++) { +struct tcindex_filter_result *r = p->perfect + i; + +tcf_unbind_filter (tp, &r->res); +if (tcf_exts_get_net (&r->exts)) +tcf_queue_work (&r->rwork, + tcindex_destroy_rexts_work); +else +__tcindex_destroy_rexts (r); + } + } + +for (i =0 ; p->h && i < p->hash; i++) { +struct tcindex_filter *f, *next; +bool last; + +for (f =rtnl_dereference (p->h[i]); f; f = next) { + next =rtnl_dereference (f->next); +tcindex_delete (tp, &f->result, &last,NULL ); + } + }tcf_queue_work (&p->rwork, tcindex_destroy_work); }