Skip to contentSkip to conversation

ARM: dts: qcom: ipq4019: enlarge PCIe BAR range

PATCH New Christian Lamparter 1 participant 1 message Feb 26, 2019 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: qcom: ipq4019: enlarge PCIe BAR range

David Bauer reported that the VDSL modem (attached via PCIe) on his AVM Fritz!Box 7530 was complaining about not having enough space in the BAR. A closer inspection of the old qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed:

| qcom,pcie@80000 {
|	compatible = "qcom,msm_pcie";
|	reg = <0x80000 0x2000>,
|	      <0x99000 0x800>,
|	      <0x40000000 0xf1d>,
|	      <0x40000f20 0xa8>,
|	      <0x40100000 0x1000>,
|	      <0x40200000 0x100000>,
|	      <0x40300000 0xd00000>;
|	reg-names = "parf", "phy", "dm_core", "elbi",
|			"conf", "io", "bars";

Matching the reg-names with the listed reg leads to <0xd00000> as the size for the "bars".

---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/qcom-ipq4019.dtsi +2 -2
index 78b24385b269..5578e3aa9f84 100644
@@ -395,8 +395,8 @@
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
-				  0x82000000 0 0x40300000 0x40300000 0 0x400000>;
+			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>,
+				 <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "msi";
Signature · 1 line
2.20.1