Skip to contentSkip to conversation

Drop support for I2C 10 bit devices from I3C subsystem

PATCH Superseded Przemyslaw Gaj 2 participants 5 messages Feb 26, 2019

Subsystems (3)

v1 of 6 Superseded Latest is v6 →

lore
Share & tools
lore

Przemyslaw Gaj

author maintainer
#0 lore raw

cover Drop support for I2C 10 bit devices from I3C subsystem

I3C MIPI spec does not clearly say that I2C 10bit devices are supported. Additionally, it isn't possible to pass 10 bit device properly through DEFSLVS command and reserve address for such device on secondary master side.

Przemyslaw Gaj (3):
i3c: Drop support for I2C 10 bit addresing
i3c: master: cdns: Drop support for I2C 10 bit addresing in Cadence
I3C master
dt-bindings: i3c: Document dropped support for I2C 10 bit devices

 Documentation/devicetree/bindings/i3c/i3c.txt | 4 +++-
 drivers/i3c/master.c                          | 7 +++++++
 drivers/i3c/master/i3c-master-cdns.c          | 4 +---
 3 files changed, 11 insertions(+), 4 deletions(-)
Signature · 7 lines
2.8.3


_______________________________________________
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c
author maintainer
#1 lore raw

PATCH 1/3 i3c: Drop support for I2C 10 bit addresing

This patch dropps support for I2C devices with 10 bit addressing. When I2C device with 10 bit address is defined in DT, I3C master registration fails.

---
 drivers/i3c/master.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/i3c/master.c +7 -0
index 2dc628d..6c7fa4b 100644
@@ -1962,6 +1962,13 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
 	if (ret)
 		return ret;
 
+    /* The I3C Specification does not clearly say I2C devices with 10-bit
+     * address are supported. These devices can't be passed properly through
+     * DEFSLVS command.
+     */
+    if (boardinfo->base.flags & I2C_CLIENT_TEN)
+        return -ENOTSUPP;
+
 	/* LVR is encoded in reg[2]. */
 	boardinfo->lvr = reg[2];
 
Signature · 7 lines
2.8.3


_______________________________________________
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c
#2 lore raw

Re: [PATCH 1/3] i3c: Drop support for I2C 10 bit addresing

Quoted 13 lines · On Tue, 26 Feb 2019 11:00:01 +0000 Przemyslaw Gaj <[email protected]> wrote:

This patch dropps support for I2C devices with 10 bit addressing. When I2C device with 10 bit address is defined in DT, I3C master registration fails.

---
 drivers/i3c/master.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/i3c/master.c +0 -0
index 2dc628d..6c7fa4b 100644

drivers/i3c/master.c of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master, · line 1969

Quoted 8 lines
drivers/i3c/master.c +5 -0
@@ -1962,6 +1962,13 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
 	if (ret)
 		return ret;
 
+    /* The I3C Specification does not clearly say I2C devices with 10-bit
+     * address are supported. These devices can't be passed properly through
+     * DEFSLVS command.
+     */
+    if (boardinfo->base.flags & I2C_CLIENT_TEN)

Please add a dev_err() here so that the user knows why it failed.

The rest of the series looks good.

drivers/i3c/master.c of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master, · line 1974

Quoted 5 lines
drivers/i3c/master.c +2 -0
+        return -ENOTSUPP;
+
 	/* LVR is encoded in reg[2]. */
 	boardinfo->lvr = reg[2];
 

_______________________________________________
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c

author maintainer
#3 lore raw

PATCH 2/3 i3c: master: cdns: Drop support for I2C 10 bit addresing in Cadence I3C master

In reply to Przemyslaw Gaj

Because this patch series dropped support for 10 bit I2C devices, support is also dropped in Cadence I3C master driver.

---
 drivers/i3c/master/i3c-master-cdns.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/i3c/master/i3c-master-cdns.c +1 -3
index 8889a4f..1797fbf 100644
@@ -1010,9 +1010,7 @@ static int cdns_i3c_master_attach_i2c_dev(struct i2c_dev_desc *dev)
 	master->free_rr_slots &= ~BIT(slot);
 	i2c_dev_set_master_data(dev, data);
 
-	writel(prepare_rr0_dev_address(dev->boardinfo->base.addr) |
-	       (dev->boardinfo->base.flags & I2C_CLIENT_TEN ?
-		DEV_ID_RR0_LVR_EXT_ADDR : 0),
+	writel(prepare_rr0_dev_address(dev->boardinfo->base.addr),
 	       master->regs + DEV_ID_RR0(data->id));
 	writel(dev->boardinfo->lvr, master->regs + DEV_ID_RR2(data->id));
 	writel(readl(master->regs + DEVS_CTRL) |
Signature · 7 lines
2.8.3


_______________________________________________
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c
author maintainer
#4 lore raw

PATCH 3/3 dt-bindings: i3c: Document dropped support for I2C 10 bit devices

In reply to Przemyslaw Gaj

Because this patch series dropped support for 10 bit I2C devices, I'm documenting this.

---
 Documentation/devicetree/bindings/i3c/i3c.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/i3c/i3c.txt +3 -1
index ab729a0..4ffe059 100644
@@ -39,7 +39,9 @@ valid here, but several new properties have been added.
 New constraint on existing properties:
 --------------------------------------
 - reg: contains 3 cells
-  + first cell : still encoding the I2C address
+  + first cell : still encoding the I2C address. 10 bit addressing is not
+    supported. Devices with 10 bit address can't be properly passed through
+    DEFSLVS command.
 
   + second cell: shall be 0
 
Signature · 7 lines
2.8.3


_______________________________________________
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c