Skip to contentSkip to conversation

ath10k: Free beacon buf later in vdev teardown.

PATCH In review [email protected] 2 participants 5 messages Feb 27, 2019 – Sep 12, 2019 1 message not in the archive Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ath10k: Free beacon buf later in vdev teardown.

From: Ben Greear <[email protected]>

My wave-1 firmware often crashes when I am bringing down AP vdevs, and sometimes at least some machines lockup hard after spewing IOMMU errors.

I don't see the same issue in STA mode, so I suspect beacons are the issue.

Moving the beacon buf deletion to later in the vdev teardown logic appears to help this problem. Firmware still crashes often, but several iterations did not show IOMMU errors and machine didn't hang.

---
 drivers/net/wireless/ath/ath10k/mac.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath10k/mac.c +4 -4
index f70c48ec9464..c38561788791 100644
@@ -6142,10 +6142,6 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 
 	mutex_lock(&ar->conf_mutex);
 
-	spin_lock_bh(&ar->data_lock);
-	ath10k_mac_vif_beacon_cleanup(arvif);
-	spin_unlock_bh(&ar->data_lock);
-
 	ret = ath10k_spectral_vif_stop(arvif);
 	if (ret)
 		ath10k_warn(ar, "failed to stop spectral for vdev %i: %d\n",
@@ -6204,6 +6200,10 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw,
 			peer->vif = NULL;
 		}
 	}
+
+	/* Clean this up late, less opportunity for firmware to access
+	   DMA memory we have deleted. */
+	ath10k_mac_vif_beacon_cleanup(arvif);
 	spin_unlock_bh(&ar->data_lock);
 
 	ath10k_peer_cleanup(ar, arvif->vdev_id);
Signature · 1 line
2.20.1
#1 lore raw
Quoted 11 lines · [email protected] wrote:

My wave-1 firmware often crashes when I am bringing down AP vdevs, and sometimes at least some machines lockup hard after spewing IOMMU errors.

I don't see the same issue in STA mode, so I suspect beacons are the issue.

Moving the beacon buf deletion to later in the vdev teardown logic appears to help this problem. Firmware still crashes often, but several iterations did not show IOMMU errors and machine didn't hang.

I'm not really fond of fixing issues just by luck but after a quick look at the code I can't see any harm in this change either. So I guess it's ok.

But can you provide the exact hardware and firmware you used for testing, I'll add it to the commit log. I want to document that in every commit:

https://wireless.wiki.kernel.org/en/users/drivers/ath10k/submittingpatches#guidelines

Please also CC ath10k list when submitting patches.

Signature · 3 lines
https://patchwork.kernel.org/patch/10831867/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

A message that is not in the archive (sent off-list or not yet received): [email protected]

author
#3 lore raw
Quoted 14 lines · Kalle Valo
Quoted 11 lines · [email protected] wrote:

My wave-1 firmware often crashes when I am bringing down AP vdevs, and sometimes at least some machines lockup hard after spewing IOMMU errors.

I don't see the same issue in STA mode, so I suspect beacons are the issue.

Moving the beacon buf deletion to later in the vdev teardown logic appears to help this problem. Firmware still crashes often, but several iterations did not show IOMMU errors and machine didn't hang.

Quoted 5 lines

I'm not really fond of fixing issues just by luck but after a quick look at the code I can't see any harm in this change either. So I guess it's ok.

But can you provide the exact hardware and firmware you used for testing, I'll add it to the commit log. I want to document that in every commit:

I used Compex WLE900VX hardware, and the firmware was ath10k-ct something or other, it has been a long time, so I don't recall the exact firmware version.

The real fix for this is to have the firmware do proper beacon tx completion logic so that the driver can know when it can safely free buffers. I implemented this in my ath10k-ct firmware/driver, but unless you want to start accepting patches for my firmware, then that will not help upstream ath10k.

Thanks,
Ben

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
#4 lore raw
Quoted 15 lines · Ben Greear
Quoted 14 lines · Kalle Valo
Quoted 11 lines · [email protected] wrote:

My wave-1 firmware often crashes when I am bringing down AP vdevs, and sometimes at least some machines lockup hard after spewing IOMMU errors.

I don't see the same issue in STA mode, so I suspect beacons are the issue.

Moving the beacon buf deletion to later in the vdev teardown logic appears to help this problem. Firmware still crashes often, but several iterations did not show IOMMU errors and machine didn't hang.

Quoted 8 lines
Quoted 5 lines

I'm not really fond of fixing issues just by luck but after a quick look at the code I can't see any harm in this change either. So I guess it's ok.

But can you provide the exact hardware and firmware you used for testing, I'll add it to the commit log. I want to document that in every commit:

I used Compex WLE900VX hardware, and the firmware was ath10k-ct something or other, it has been a long time, so I don't recall the exact firmware version.

Ok, I added QCA9880 and unspecified version of ath10k-ct firmware to the commit log.

Quoted 5 lines

The real fix for this is to have the firmware do proper beacon tx completion logic so that the driver can know when it can safely free buffers. I implemented this in my ath10k-ct firmware/driver, but unless you want to start accepting patches for my firmware, then that will not help upstream ath10k.

It's a challenge enough to support so many differerent QCOM firmware branches and still try to avoid bloating the driver too much to keep it maintainable. Adding support for a new firmware branch/fork with a significantly different interface would make everything so much harder.

Signature · 1 line
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
#5 lore raw
In reply to [email protected]
Quoted 12 lines · [email protected] wrote:

My wave-1 firmware often crashes when I am bringing down AP vdevs, and sometimes at least some machines lockup hard after spewing IOMMU errors.

I don't see the same issue in STA mode, so I suspect beacons are the issue.

Moving the beacon buf deletion to later in the vdev teardown logic appears to help this problem. Firmware still crashes often, but several iterations did not show IOMMU errors and machine didn't hang.

Quoted 5 lines

Tested hardware: QCA9880
Tested firmware: ath10k-ct from beginning of 2019, exact version unknown

Patch applied to ath-next branch of ath.git, thanks.

b3281c6cb768 ath10k: free beacon buf later in vdev teardown

Signature · 3 lines
https://patchwork.kernel.org/patch/10831867/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches