migration: Cleanup during exit
PATCH 1/1 migration: Cleanup during exit
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the main_loop finishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.
We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
--- include/migration/misc.h | 2 +- migration/migration.c | 10 +++++++++- vl.c | 7 ++++++- 3 files changed, 16 insertions(+), 3 deletions(-)
include/migration/misc.h +1 -1
@@ -36,7 +36,7 @@ void dump_vmstate_json_to_file(FILE *out_fp);/* migration/migration.c */ void migration_object_init (void ); -void migration_object_finalize (void ); +void migration_shutdown (void );void qemu_start_incoming_migration (const char *uri,Error **errp);bool migration_is_idle (void );void add_migration_state_change_notifier (Notifier *notify);
migration/migration.c +9 -1
@@ -126,6 +126,7 @@ static bool migration_object_check(MigrationState *ms, Error **errp);static int migration_maybe_pause (MigrationState *s,int *current_active_state,int new_state); +static void migrate_fd_cancel (MigrationState *s);void migration_object_init (void ) {
@@ -167,8 +168,13 @@ void migration_object_init(void) } } -void migration_object_finalize (void ) +void migration_shutdown (void ) { +/* +* Cancel the current migration - that will (eventually) +* stop the migration using this structure +*/ +migrate_fd_cancel (current_migration);object_unref (OBJECT (current_migration)); }
@@ -3134,6 +3140,7 @@ static void *migration_thread(void *opaque)rcu_register_thread (); +object_ref (OBJECT (s)); s->iteration_start_time =qemu_clock_get_ms (QEMU_CLOCK_REALTIME );qemu_savevm_state_header (s->to_dst_file);
@@ -3230,6 +3237,7 @@ static void *migration_thread(void *opaque)trace_migration_thread_after_loop ();migration_iteration_finish (s); +object_unref (OBJECT (s));rcu_unregister_thread ();return NULL ; }
vl.c +6 -1
@@ -4579,6 +4579,12 @@ int main(int argc, char **argv, char **envp)gdbserver_cleanup (); +/* +* cleaning up the migration object cancels any existing migration +* try to do this early so that it also stops using devices. +*/ +migration_shutdown (); +/* No more vcpu or device emulation activity beyond this point */ vm_shutdown ();
@@ -4594,7 +4600,6 @@ int main(int argc, char **argv, char **envp)monitor_cleanup ();qemu_chr_cleanup ();user_creatable_cleanup (); -migration_object_finalize ();/* TODO: unref root container, check all devices are ok */ return 0 ;
Signature · 1 line
2.20.1
Quoted 11 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Quoted 8 lines
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
Signed-off-by Dr. David Alan Gilbert <[email protected]>Tested-by Alex Bennée <[email protected]>
Quoted 11 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Quoted 5 lines
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
So does it mean that even with the patch it's still possible the migration thread will be accessing device structs that have already been freed which can still crash QEMU?
Thanks,
Signature · 1 line
Peter Xu
Quoted 15 lines · * Peter Xu ([email protected]) wrote:
Quoted 14 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
Quoted 6 lines
Quoted 2 lines
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
So does it mean that even with the patch it's still possible the migration thread will be accessing device structs that have already been freed which can still crash QEMU?
Possibly yes; I'm not sure how to go to the next stage and stop that case; the consensus seems to be we don't want to explicitly block during the exit process, so doing a join on the migration thread doesn't seem to be wanted.
Dave
Quoted 4 lines
Thanks,
Signature · 1 line
Peter Xu
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 19 lines · Dr. David Alan Gilbert
Quoted 18 lines · * Peter Xu ([email protected]) wrote:
Quoted 16 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
Quoted 8 lines
Quoted 3 lines
So does it mean that even with the patch it's still possible the migration thread will be accessing device structs that have already been freed which can still crash QEMU?
Possibly yes; I'm not sure how to go to the next stage and stop that case; the consensus seems to be we don't want to explicitly block during the exit process, so doing a join on the migration thread doesn't seem to be wanted.
Essentially the many *_cleanup() calls at the end of main() in vl.c are only ever safe if all background threads have stopped using the resources that are being freed. This isn't the case with migration currently. I also worry about other threads that might be running in QEMU, SPICE in particular as it touchs many device backends.
Aborting the migration & joining the migration threads is the natural way to address this. Cancelling appears to require the main loop to still be running, so would require main_loop_should_exit() to issue the cancel & return false unless it has completed. This would delay shutdown for as long as it takes migration to abort.
FWIW, even the bdrv_close_all() call during shutdown can delay things for a considerable time if draining the backends isn't a quick op, which could be the case if there are storage problems (blocked local I/O, or interrupted network - rbd/ceph/nfs clients). So I'm not sure that stopping migration is inherantly worse than what's already possible with block cleanup, in terms of delaying things.
A slightly more hacky approach would be to pthread_cancel() all the migration threads. Normally we'd never use pthread_cancel() as it is incredibly hard to ensure all memory used by the threads is freed. Since we're about to exit the process though, this cleanup does not matter. The risk, however, is that one of the threads is holding a mutex which then blocks the rest of the *cleanup functions, so this still feels dangerous.
Overall to me a clean cancel & join of the migration threads feels like the only safe option, unless we just remove all notion of cleanup from QEMU & delete all the _cleanup functions in main() and let the OS free all memory.
Regards,
Daniel
Signature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
Quoted 35 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 19 lines · Dr. David Alan Gilbert
Quoted 18 lines · * Peter Xu ([email protected]) wrote:
Quoted 16 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
Quoted 8 lines
Quoted 3 lines
So does it mean that even with the patch it's still possible the migration thread will be accessing device structs that have already been freed which can still crash QEMU?
Possibly yes; I'm not sure how to go to the next stage and stop that case; the consensus seems to be we don't want to explicitly block during the exit process, so doing a join on the migration thread doesn't seem to be wanted.
Essentially the many
*_cleanup()calls at the end ofmain()invl.care only ever safe if all background threads have stopped using the resources that are being freed. This isn't the case with migration currently. I also worry about other threads that might be running in QEMU, SPICE in particular as it touchs many device backends.
Quoted 5 lines
Aborting the migration & joining the migration threads is the natural way to address this. Cancelling appears to require the main loop to still be running, so would require
main_loop_should_exit()to issue the cancel & return false unless it has completed. This would delay shutdown for as long as it takes migration to abort.
ish - cancelling performs a shutdown(2) on the fd, that should be enough in most cases to kick the migration thread into falling out without main loop interaction; I think...
Quoted 15 lines
FWIW, even the
bdrv_close_all()call during shutdown can delay things for a considerable time if draining the backends isn't a quick op, which could be the case if there are storage problems (blocked local I/O, or interrupted network - rbd/ceph/nfs clients). So I'm not sure that stopping migration is inherantly worse than what's already possible with block cleanup, in terms of delaying things.A slightly more hacky approach would be to
pthread_cancel()all the migration threads. Normally we'd never usepthread_cancel()as it is incredibly hard to ensure all memory used by the threads is freed. Since we're about to exit the process though, this cleanup does not matter. The risk, however, is that one of the threads is holding a mutex which then blocks the rest of the *cleanup functions, so this still feels dangerous.
Quoted 4 lines
Overall to me a clean cancel & join of the migration threads feels like the only safe option, unless we just remove all notion of cleanup from QEMU & delete all the
_cleanupfunctions inmain()and let the OS free all memory.
That's actually my preference; I think trying to do clean tidy ups here is very racy and doesn't gain much. However, for things like storage there may be locks that have to be properly dropped and bitmaps and things to be stored/sync'd - so just exiting probably isn't safe either.
Dave
Quoted 6 lines
Regards,
DanielSignature · 3 lines
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :| |: https://libvirt.org -o- https://fstop138.berrange.com :| |: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 42 lines · Dr. David Alan Gilbert
Quoted 35 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 19 lines · Dr. David Alan Gilbert
Quoted 18 lines · * Peter Xu ([email protected]) wrote:
Quoted 16 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
Quoted 8 lines
Quoted 3 lines
So does it mean that even with the patch it's still possible the migration thread will be accessing device structs that have already been freed which can still crash QEMU?
Possibly yes; I'm not sure how to go to the next stage and stop that case; the consensus seems to be we don't want to explicitly block during the exit process, so doing a join on the migration thread doesn't seem to be wanted.
Essentially the many
*_cleanup()calls at the end ofmain()invl.care only ever safe if all background threads have stopped using the resources that are being freed. This isn't the case with migration currently. I also worry about other threads that might be running in QEMU, SPICE in particular as it touchs many device backends.Quoted 5 lines
Aborting the migration & joining the migration threads is the natural way to address this. Cancelling appears to require the main loop to still be running, so would require
main_loop_should_exit()to issue the cancel & return false unless it has completed. This would delay shutdown for as long as it takes migration to abort.
Quoted 3 lines
ish - cancelling performs a shutdown(2) on the fd, that should be enough in most cases to kick the migration thread into falling out without main loop interaction; I think...
Dave, could you hint me on when shutdown() will not suffice (say, we'll hang death if we do join() upon the migration thread)?
Quoted 21 lines
Quoted 16 lines
FWIW, even the
bdrv_close_all()call during shutdown can delay things for a considerable time if draining the backends isn't a quick op, which could be the case if there are storage problems (blocked local I/O, or interrupted network - rbd/ceph/nfs clients). So I'm not sure that stopping migration is inherantly worse than what's already possible with block cleanup, in terms of delaying things.A slightly more hacky approach would be to
pthread_cancel()all the migration threads. Normally we'd never usepthread_cancel()as it is incredibly hard to ensure all memory used by the threads is freed. Since we're about to exit the process though, this cleanup does not matter. The risk, however, is that one of the threads is holding a mutex which then blocks the rest of the *cleanup functions, so this still feels dangerous.Quoted 4 lines
Overall to me a clean cancel & join of the migration threads feels like the only safe option, unless we just remove all notion of cleanup from QEMU & delete all the
_cleanupfunctions inmain()and let the OS free all memory.
Quoted 5 lines
That's actually my preference; I think trying to do clean tidy ups here is very racy and doesn't gain much. However, for things like storage there may be locks that have to be properly dropped and bitmaps and things to be stored/sync'd - so just exiting probably isn't safe either.
I'm unsure about whether I caught the whole idea but I feel like we can't drop all the cleanup hooks since what if we want to do something else than "freeing memories"? Or anything that the OS can't do for us but we want to try to do before the process quits. If that operation hangs we'll probably face a similar hang issue.
Regarding pthread_cancel() - it will only work if the thread reaches cancellation points, right? Then does it mean that it still cannot guarantee the thread will quit very soon and we still have chance that we'll wait forever when join()? One major reason that the thread will be waiting should be the migration streams but AFAIU shutdown() (as Dave has mentioned) should solve this problem properly, then I'm unsuer how pthread_cancel() can help much comparing to shutdown()...
My understanding (probably not correct, but I'll just speak loud...) is that we will never have a way to guarantee a process to quit cleanly all the time because there're really many things that can hang (I'm assuming we've already solved the MigrationState refcounting issue by this patch, so I'm assuming we're having a "hang QEMU" rather than crashing issue). Then IMHO we could simply do whatever we can do to cleanup everything assuming no hang will happen, and if it really happens we use SIGKILL which will be the last thing we can do by which we might lost many things (e.g., unflushed caches in block layer) but we've tried our best. For migration, it'll be (1) cancel (not pthread_cancel, but cancel the migration to trigger shutdown() on fds or whatever) (2) join thread (3) finalize/cleanup data structures.
IMHO SIGKILL is the real de-facto solution for all these issues to me. And even if with SIGKILL we can still hang.... but I'll assume those hangs will be kernel problems not QEMU since SIGKILL should be designed to kill a process without a question.
Thanks,
Signature · 1 line
Peter Xu
Quoted 43 lines · * Peter Xu ([email protected]) wrote:
Quoted 42 lines · Dr. David Alan Gilbert
Quoted 40 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 19 lines · Dr. David Alan Gilbert
Quoted 18 lines · * Peter Xu ([email protected]) wrote:
Quoted 16 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
Quoted 8 lines
Quoted 3 lines
So does it mean that even with the patch it's still possible the migration thread will be accessing device structs that have already been freed which can still crash QEMU?
Possibly yes; I'm not sure how to go to the next stage and stop that case; the consensus seems to be we don't want to explicitly block during the exit process, so doing a join on the migration thread doesn't seem to be wanted.
Essentially the many
*_cleanup()calls at the end ofmain()invl.care only ever safe if all background threads have stopped using the resources that are being freed. This isn't the case with migration currently. I also worry about other threads that might be running in QEMU, SPICE in particular as it touchs many device backends.Aborting the migration & joining the migration threads is the natural way to address this. Cancelling appears to require the main loop to still be running, so would require
main_loop_should_exit()to issue the cancel & return false unless it has completed. This would delay shutdown for as long as it takes migration to abort.
Quoted 6 lines
Quoted 3 lines
ish - cancelling performs a shutdown(2) on the fd, that should be enough in most cases to kick the migration thread into falling out without main loop interaction; I think...
Dave, could you hint me on when
shutdown()will not suffice (say, we'll hang death if we dojoin()upon the migration thread)?
I think I mostly worry about when we hang in a device's migration code or where that interacts with an external program (e.g. vhost-user).
Quoted 27 lines
Quoted 21 lines
Quoted 16 lines
FWIW, even the
bdrv_close_all()call during shutdown can delay things for a considerable time if draining the backends isn't a quick op, which could be the case if there are storage problems (blocked local I/O, or interrupted network - rbd/ceph/nfs clients). So I'm not sure that stopping migration is inherantly worse than what's already possible with block cleanup, in terms of delaying things.A slightly more hacky approach would be to
pthread_cancel()all the migration threads. Normally we'd never usepthread_cancel()as it is incredibly hard to ensure all memory used by the threads is freed. Since we're about to exit the process though, this cleanup does not matter. The risk, however, is that one of the threads is holding a mutex which then blocks the rest of the *cleanup functions, so this still feels dangerous.Quoted 4 lines
Overall to me a clean cancel & join of the migration threads feels like the only safe option, unless we just remove all notion of cleanup from QEMU & delete all the
_cleanupfunctions inmain()and let the OS free all memory.Quoted 5 lines
That's actually my preference; I think trying to do clean tidy ups here is very racy and doesn't gain much. However, for things like storage there may be locks that have to be properly dropped and bitmaps and things to be stored/sync'd - so just exiting probably isn't safe either.
Quoted 5 lines
I'm unsure about whether I caught the whole idea but I feel like we can't drop all the cleanup hooks since what if we want to do something else than "freeing memories"? Or anything that the OS can't do for us but we want to try to do before the process quits. If that operation hangs we'll probably face a similar hang issue.
Right; things like where the block code wants to ensure that bitmaps/data structtures/buffers are saved out - you need to give them a chance.
Quoted 7 lines
Regarding
pthread_cancel()- it will only work if the thread reaches cancellation points, right? Then does it mean that it still cannot guarantee the thread will quit very soon and we still have chance that we'll wait forever whenjoin()? One major reason that the thread will be waiting should be the migration streams but AFAIUshutdown()(as Dave has mentioned) should solve this problem properly, then I'm unsuer howpthread_cancel()can help much comparing toshutdown()...
If I understand correctly, threads are always cancelable by default?
Quoted 4 lines
My understanding (probably not correct, but I'll just speak loud...) is that we will never have a way to guarantee a process to quit cleanly all the time because there're really many things that can hang (I'm assuming we've already solved the MigrationState refcounting
Quoted 8 lines
issue by this patch, so I'm assuming we're having a "hang QEMU" rather than crashing issue). Then IMHO we could simply do whatever we can do to cleanup everything assuming no hang will happen, and if it really happens we use SIGKILL which will be the last thing we can do by which we might lost many things (e.g., unflushed caches in block layer) but we've tried our best. For migration, it'll be (1) cancel (not
pthread_cancel, but cancel the migration to triggershutdown()on fds or whatever) (2) join thread (3) finalize/cleanup data structures.
Right so the question I think is just whether it's worth adding the join at the moment which turns us from a small-risk of crash to small-risk of hang.
Quoted 4 lines
IMHO SIGKILL is the real de-facto solution for all these issues to me. And even if with SIGKILL we can still hang.... but I'll assume those hangs will be kernel problems not QEMU since SIGKILL should be designed to kill a process without a question.
Dave
Quoted 4 lines
Thanks,
Signature · 1 line
Peter Xu
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Quoted 48 lines · Dr. David Alan Gilbert
Quoted 47 lines · * Peter Xu ([email protected]) wrote:
Quoted 45 lines · Dr. David Alan Gilbert
Quoted 35 lines · * Daniel P. Berrangé ([email protected]) wrote:
Quoted 19 lines · Dr. David Alan Gilbert
Quoted 18 lines · * Peter Xu ([email protected]) wrote:
Quoted 16 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
Quoted 8 lines
Quoted 3 lines
So does it mean that even with the patch it's still possible the migration thread will be accessing device structs that have already been freed which can still crash QEMU?
Possibly yes; I'm not sure how to go to the next stage and stop that case; the consensus seems to be we don't want to explicitly block during the exit process, so doing a join on the migration thread doesn't seem to be wanted.
Essentially the many
*_cleanup()calls at the end ofmain()invl.care only ever safe if all background threads have stopped using the resources that are being freed. This isn't the case with migration currently. I also worry about other threads that might be running in QEMU, SPICE in particular as it touchs many device backends.Quoted 5 lines
Aborting the migration & joining the migration threads is the natural way to address this. Cancelling appears to require the main loop to still be running, so would require
main_loop_should_exit()to issue the cancel & return false unless it has completed. This would delay shutdown for as long as it takes migration to abort.ish - cancelling performs a shutdown(2) on the fd, that should be enough in most cases to kick the migration thread into falling out without main loop interaction; I think...
Quoted 5 lines
Quoted 2 lines
Dave, could you hint me on when
shutdown()will not suffice (say, we'll hang death if we dojoin()upon the migration thread)?I think I mostly worry about when we hang in a device's migration code or where that interacts with an external program (e.g. vhost-user).
I see.
Quoted 46 lines
Quoted 28 lines
Quoted 22 lines
Quoted 17 lines
FWIW, even the
bdrv_close_all()call during shutdown can delay things for a considerable time if draining the backends isn't a quick op, which could be the case if there are storage problems (blocked local I/O, or interrupted network - rbd/ceph/nfs clients). So I'm not sure that stopping migration is inherantly worse than what's already possible with block cleanup, in terms of delaying things.A slightly more hacky approach would be to
pthread_cancel()all the migration threads. Normally we'd never usepthread_cancel()as it is incredibly hard to ensure all memory used by the threads is freed. Since we're about to exit the process though, this cleanup does not matter. The risk, however, is that one of the threads is holding a mutex which then blocks the rest of the *cleanup functions, so this still feels dangerous.Quoted 4 lines
Overall to me a clean cancel & join of the migration threads feels like the only safe option, unless we just remove all notion of cleanup from QEMU & delete all the
_cleanupfunctions inmain()and let the OS free all memory.Quoted 5 lines
That's actually my preference; I think trying to do clean tidy ups here is very racy and doesn't gain much. However, for things like storage there may be locks that have to be properly dropped and bitmaps and things to be stored/sync'd - so just exiting probably isn't safe either.
Quoted 5 lines
I'm unsure about whether I caught the whole idea but I feel like we can't drop all the cleanup hooks since what if we want to do something else than "freeing memories"? Or anything that the OS can't do for us but we want to try to do before the process quits. If that operation hangs we'll probably face a similar hang issue.
Right; things like where the block code wants to ensure that bitmaps/data structtures/buffers are saved out - you need to give them a chance.
Quoted 7 lines
Regarding
pthread_cancel()- it will only work if the thread reaches cancellation points, right? Then does it mean that it still cannot guarantee the thread will quit very soon and we still have chance that we'll wait forever whenjoin()? One major reason that the thread will be waiting should be the migration streams but AFAIUshutdown()(as Dave has mentioned) should solve this problem properly, then I'm unsuer howpthread_cancel()can help much comparing toshutdown()...
Quoted 1 line
If I understand correctly, threads are always cancelable by default?
I never used that, but I'm reading man pthread_setcancelstate and the default cancel state/type for pthreads should be PTHREAD_CANCEL_ENABLE & PTHREAD_CANCEL_DEFERRED, which IIUC means that a process can be cancelled but in a deferred fashion (until the cancellation points, which is listed in "man pthread", section "Cancellation points"). There is an PTHREAD_CANCEL_ASYNCHRONOUS comparing to PTHREAD_CANCEL_DEFERRED which seems to allow the thread to respond to the cancel request faster but still not guaranteed:
PTHREAD_CANCEL_ASYNCHRONOUS
The thread can be canceled at any time. (Typically, it will be canceled immediately upon receiving a cancellation request, but the system doesn't guarantee this.)
I took a quick glance on how it's implemented in glibc and it should be using a SIGTIMER to wake up the thread, and that explains why it's not guaranteed. As a conclusion, there seems to have no way to guarantee that we can cancel a thread immediately.
Quoted 14 lines
Quoted 13 lines
My understanding (probably not correct, but I'll just speak loud...) is that we will never have a way to guarantee a process to quit cleanly all the time because there're really many things that can hang (I'm assuming we've already solved the MigrationState refcounting issue by this patch, so I'm assuming we're having a "hang QEMU" rather than crashing issue). Then IMHO we could simply do whatever we can do to cleanup everything assuming no hang will happen, and if it really happens we use SIGKILL which will be the last thing we can do by which we might lost many things (e.g., unflushed caches in block layer) but we've tried our best. For migration, it'll be (1) cancel (not
pthread_cancel, but cancel the migration to triggershutdown()on fds or whatever) (2) join thread (3) finalize/cleanup data structures.
Quoted 3 lines
Right so the question I think is just whether it's worth adding the join at the moment which turns us from a small-risk of crash to small-risk of hang.
Sorry to be unclear on this... I would see the discussion was about the next step on how we should proceed (especially we've had thought about removing all the cleanup hooks which seem hard to achieve from the first glance). This patch itself was well tested and it guarantees to unbreak people so I would assume it's good.
Thanks,
Signature · 1 line
Peter Xu
Quoted 86 lines · Dr. David Alan Gilbert (git)
From: "Dr. David Alan Gilbert" <[email protected]>
Currently we cleanup the migration object as we exit main after the
main_loopfinishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures.We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits.
Cancelling the migration during migration also tries to get the thread to quit.
We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed.
Signed-off-by Dr. David Alan Gilbert <[email protected]>Tested-by Alex Bennée <[email protected]>--- include/migration/misc.h | 2 +- migration/migration.c | 10 +++++++++- vl.c | 7 ++++++- 3 files changed, 16 insertions(+), 3 deletions(-)include/migration/misc.h +1
-1@@ -36,7 +36,7 @@ void dump_vmstate_json_to_file(FILE *out_fp);/* migration/migration.c */ void migration_object_init (void ); -void migration_object_finalize (void ); +void migration_shutdown (void );void qemu_start_incoming_migration (const char *uri,Error **errp);bool migration_is_idle (void );void add_migration_state_change_notifier (Notifier *notify);migration/migration.c +9
-1@@ -126,6 +126,7 @@ static bool migration_object_check(MigrationState *ms, Error **errp);static int migration_maybe_pause (MigrationState *s,int *current_active_state,int new_state); +static void migrate_fd_cancel (MigrationState *s);void migration_object_init (void ) {@@ -167,8 +168,13 @@ void migration_object_init(void) } } -void migration_object_finalize (void ) +void migration_shutdown (void ) { +/* +* Cancel the current migration - that will (eventually) +* stop the migration using this structure +*/ +migrate_fd_cancel (current_migration);object_unref (OBJECT (current_migration)); }@@ -3134,6 +3140,7 @@ static void *migration_thread(void *opaque)rcu_register_thread (); +object_ref (OBJECT (s)); s->iteration_start_time =qemu_clock_get_ms (QEMU_CLOCK_REALTIME );qemu_savevm_state_header (s->to_dst_file);@@ -3230,6 +3237,7 @@ static void *migration_thread(void *opaque)trace_migration_thread_after_loop ();migration_iteration_finish (s); +object_unref (OBJECT (s));rcu_unregister_thread ();return NULL ; }vl.c +0
-0
vl.c int main(int argc, char **argv, char **envp) · line 4587
Quoted 9 lines
vl.c +6
-0@@ -4579,6 +4579,12 @@ int main(int argc, char **argv, char **envp)gdbserver_cleanup (); +/* +* cleaning up the migration object cancels any existing migration +* try to do this early so that it also stops using devices. +*/ +migration_shutdown (); +
We do like to vary our language over here, I guess shutdown and cleanup imply subtly different things. FWIW I suspect the gdbserver_cleanup() should be a shutdown ;-)
vl.c int main(int argc, char **argv, char **envp) · line 4605
Quoted 11 lines
vl.c +0
-1/* No more vcpu or device emulation activity beyond this point */ vm_shutdown ();@@ -4594,7 +4600,6 @@ int main(int argc, char **argv, char **envp)monitor_cleanup ();qemu_chr_cleanup ();user_creatable_cleanup (); -migration_object_finalize ();/* TODO: unref root container, check all devices are ok */ return 0 ;
--
Alex Bennée