drm/i915: Fix atomic state leak when resetting HDMI link
Subsystems (2)
PATCH 1/2 drm/i915: Fix atomic state leak when resetting HDMI link
Atomic state needs to be put even if the commit was successful.
--- drivers/gpu/drm/i915/intel_ddi.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +1 -6
@@ -3984,12 +3984,7 @@ static int modeset_pipe(struct drm_crtc *crtc, goto out; ret =drm_atomic_commit (state); -if (ret) - goto out; - -return 0 ; - - out: +out:drm_atomic_state_put (state);return ret;
Signature · 6 lines
2.21.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/2 drm/i915: Don't manually add connectors and planes state
drm_atomic_commit() call chain already takes care of adding connectors and planes, so lets no add then manually if not changing their states.
--- drivers/gpu/drm/i915/intel_ddi.c | 8 -------- 1 file changed, 8 deletions(-)
drivers/gpu/drm/i915/intel_ddi.c +0 -8
@@ -3975,14 +3975,6 @@ static int modeset_pipe(struct drm_crtc *crtc, crtc_state->mode_changed = true; - ret =drm_atomic_add_affected_connectors (state, crtc); -if (ret) - goto out; - - ret =drm_atomic_add_affected_planes (state, crtc); -if (ret) - goto out; - ret =drm_atomic_commit (state); out:drm_atomic_state_put (state);
Signature · 6 lines
2.21.0 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: Don't manually add connectors and planes state
Quoted 3 lines · José Roberto de Souza
drm_atomic_commit()call chain already takes care of adding connectors and planes, so lets no add then manually if not changing their states.
The specific callgraph would make review easier.
Quoted 29 lines
Cc Ville Syrjälä <[email protected]>Cc Lyude Paul <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 8 -------- 1 file changed, 8 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +0
-8@@ -3975,14 +3975,6 @@ static int modeset_pipe(struct drm_crtc *crtc, crtc_state->mode_changed = true; - ret =drm_atomic_add_affected_connectors (state, crtc); -if (ret) - goto out; - - ret =drm_atomic_add_affected_planes (state, crtc); -if (ret) - goto out; - ret =drm_atomic_commit (state); out:drm_atomic_state_put (state);Signature · 1 line
2.21.0
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: Don't manually add connectors and planes state
Quoted 7 lines · Ville Syrjälä
Quoted 3 lines · José Roberto de Souza
drm_atomic_commit()call chain already takes care of adding connectors and planes, so lets no add then manually if not changing their states.The specific callgraph would make review easier.
Appending this to the commit message is enough?
drm_atomic_commit()
drm_atomic_check_only() config->funcs->atomic_check()/intel_atomic_check() drm_atomic_helper_check() drm_atomic_helper_check_modeset() for_each_oldnew_crtc_in_state() drm_atomic_add_affected
_connectors()
drm_atomic_add_affected_planes()
Quoted 18 lines
Quoted 18 lines
Cc Ville Syrjälä <[email protected]>Cc Lyude Paul <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 8 -------- 1 file changed, 8 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +0
-0@@ -3975,14 +3975,6 @@ static int modeset_pipe(struct drm_crtc *crtc, crtc_state->mode_changed = true;
Quoted 13 lines
Quoted 10 lines
drivers/gpu/drm/i915/intel_ddi.c +0
-8- ret =drm_atomic_add_affected_connectors (state, crtc); -if (ret) - goto out; - - ret =drm_atomic_add_affected_planes (state, crtc); -if (ret) - goto out; - ret =drm_atomic_commit (state); out:Quoted 3 lines
drm_atomic_state_put(state);Signature · 1 line
2.21.0
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Ville Syrjälä
Reviewed-byRe: [PATCH 2/2] drm/i915: Don't manually add connectors and planes state
Quoted 18 lines · Jose
Quoted 7 lines · Ville Syrjälä
Quoted 3 lines · José Roberto de Souza
drm_atomic_commit()call chain already takes care of adding connectors and planes, so lets no add then manually if not changing their states.The specific callgraph would make review easier.
Appending this to the commit message is enough?
drm_atomic_commit()drm_atomic_check_only() config->funcs->atomic_check()/intel_atomic_check() drm_atomic_helper_check() drm_atomic_helper_check_modeset() for_each_oldnew_crtc_in_state() drm_atomic_add_affected
Quoted 3 lines
_connectors()
drm_atomic_add_affected_planes()
Yes, that helps. Thanks.
Hmm. I wonder if fastboot has actually broken this code. Maybe we need to set connectors_changed instead of mode_changed to guarantee the full modeset...
Quoted 32 lines
Quoted 32 lines
Quoted 32 lines
Cc Ville Syrjälä <[email protected]>Cc Lyude Paul <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 8 -------- 1 file changed, 8 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +0
-8@@ -3975,14 +3975,6 @@ static int modeset_pipe(struct drm_crtc *crtc, crtc_state->mode_changed = true; - ret =drm_atomic_add_affected_connectors (state, crtc); -if (ret) - goto out; - - ret =drm_atomic_add_affected_planes (state, crtc); -if (ret) - goto out; - ret =drm_atomic_commit (state); out:
drm_atomic_state_put(state);Signature · 1 line
2.21.0
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/2] drm/i915: Don't manually add connectors and planes state
Quoted 26 lines · Ville Syrjälä
Quoted 19 lines · Jose
Quoted 8 lines · Ville Syrjälä
Quoted 4 lines · José Roberto de Souza
drm_atomic_commit()call chain already takes care of adding connectors and planes, so lets no add then manually if not changing
their states.The specific callgraph would make review easier.
Appending this to the commit message is enough?
drm_atomic_commit()drm_atomic_check_only() config->funcs->atomic_check()/intel_atomic_check() drm_atomic_helper_check() drm_atomic_helper_check_modeset() for_each_oldnew_crtc_in_state() drm_atomic_add_affectedQuoted 3 lines
_connectors()
drm_atomic_add_affected_planes()Yes, that helps. Thanks.
Quoted 7 lines
Reviewed-by Ville Syrjälä <[email protected]>Hmm. I wonder if fastboot has actually broken this code. Maybe we need
to setconnectors_changedinstead ofmode_changedto guarantee the full
modeset...
Just tested and you are right, sending a separated patch to fix this.
Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Quoted 18 lines
Cc Ville Syrjälä <[email protected]>Cc Lyude Paul <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 8 -------- 1 file changed, 8 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +0
-0@@ -3975,14 +3975,6 @@ static int modeset_pipe(struct drm_crtc *crtc, crtc_state->mode_changed = true;
Quoted 15 lines
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
drivers/gpu/drm/i915/intel_ddi.c +0
-5- ret =drm_atomic_add_affected_connectors (state, crtc); -if (ret) - goto out; - - ret =drm_atomic_add_affected_planes (state, crtc);Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/i915/intel_ddi.c +0
-3-if (ret) - goto out; - ret =drm_atomic_commit (state); out:
drm_atomic_state_put(state);Signature · 1 line
2.21.0
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link
URL : https://patchwork.freedesktop.org/series/57318/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_5668 -> Patchwork_12322
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_12322 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_12322, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57318/revisions/1/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_12322:
### IGT changes ###
#### Possible regressions ####
* igt@i915_selftest@live_objects:
- fi-apl-guc: NOTRUN -> DMESG-WARN
Known issues
------------
Here are the changes found in Patchwork_12322 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@userptr:
- fi-kbl-8809g: PASS -> DMESG-WARN [fdo#108965]
* igt@gem_exec_basic@basic-bsd2:
- fi-kbl-7500u: NOTRUN -> SKIP [fdo#109271] +9
* igt@i915_selftest@live_hangcheck:
- fi-icl-u3: PASS -> INCOMPLETE [fdo#108569]
* igt@i915_selftest@live_requests:
- fi-snb-2600: PASS -> INCOMPLETE [fdo#105411]
* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: NOTRUN -> DMESG-WARN [fdo#103841]
* igt@kms_psr@primary_page_flip:
- fi-apl-guc: NOTRUN -> SKIP [fdo#109271] +40
* igt@runner@aborted:
- fi-kbl-7500u: NOTRUN -> FAIL [fdo#103841]
#### Possible fixes ####
* igt@gem_exec_suspend@basic-s3:
- fi-apl-guc: DMESG-WARN -> PASS
- {fi-icl-y}: FAIL [fdo#103375] -> PASS
* igt@gem_exec_suspend@basic-s4-devices:
- {fi-icl-y}: FAIL -> PASS
* igt@gem_mmap_gtt@basic-small-copy:
- {fi-icl-y}: TIMEOUT -> PASS
* igt@kms_busy@basic-flip-b:
- {fi-icl-y}: FAIL [fdo#103182] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#103841]: https://bugs.freedesktop.org/show_bug.cgi?id=103841
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108965]: https://bugs.freedesktop.org/show_bug.cgi?id=108965
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
Participating hosts (42 -> 39)
------------------------------
Additional (1): fi-kbl-7500u
Missing (4): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-4200u
Build changes
-------------
* Linux: CI_DRM_5668 -> Patchwork_12322
CI_DRM_5668: f31df5b814fb600861b577e2bc2cdb75c8c3e323 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4861: 017d8461ae509b2d8ef5f585de8ad908081d28a0 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12322: 8c1a39496e922ad945fb891f7c5ecb36c2ff238f @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
8c1a39496e92 drm/i915: Don't manually add connectors and planes state ae104db6497b drm/i915: Fix atomic state leak when resetting HDMI link
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12322/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.BAT: failure for series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link
Quoted 37 lines · Patchwork
== Series Details ==
Series: series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link
URL : https://patchwork.freedesktop.org/series/57318/
State : failure== Summary ==
CI Bug Log - changes from
CI_DRM_5668->Patchwork_12322
====================================================Summary
-------**FAILURE**
Serious unknown changes coming with
Patchwork_12322absolutely need
to be
verified manually.If you think the reported changes have nothing to do with the
changes
introduced inPatchwork_12322, please notify your bug team to allow
them
to document this new failure mode, which will reduce false
positives in CI.External URL:
https://patchwork.freedesktop.org/api/1.0/series/57318/revisions/1/Possible new issues
-------------------Here are the unknown changes that may have been introduced in
Patchwork_12322:
Quoted 6 lines
### IGT changes ###
#### Possible regressions ####
* igt@i915_selftest@live_objects:
- fi-apl-guc: NOTRUN -> DMESG-WARN
Not related at all.
Quoted 90 lines
Known issues
------------Here are the changes found in
Patchwork_12322that come from known
issues:### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@userptr:
- fi-kbl-8809g: PASS -> DMESG-WARN [fdo#108965]* igt@gem_exec_basic@basic-bsd2:
- fi-kbl-7500u: NOTRUN -> SKIP [fdo#109271] +9* igt@i915_selftest@live_hangcheck:
- fi-icl-u3: PASS -> INCOMPLETE [fdo#108569]* igt@i915_selftest@live_requests:
- fi-snb-2600: PASS -> INCOMPLETE [fdo#105411]* igt@kms_chamelium@dp-crc-fast:
- fi-kbl-7500u: NOTRUN -> DMESG-WARN [fdo#103841]* igt@kms_psr@primary_page_flip:
- fi-apl-guc: NOTRUN -> SKIP [fdo#109271] +40* igt@runner@aborted:
- fi-kbl-7500u: NOTRUN -> FAIL [fdo#103841]#### Possible fixes ####
* igt@gem_exec_suspend@basic-s3:
- fi-apl-guc: DMESG-WARN -> PASS
- {fi-icl-y}: FAIL [fdo#103375] -> PASS* igt@gem_exec_suspend@basic-s4-devices:
- {fi-icl-y}: FAIL -> PASS* igt@gem_mmap_gtt@basic-small-copy:
- {fi-icl-y}: TIMEOUT -> PASS* igt@kms_busy@basic-flip-b:
- {fi-icl-y}: FAIL [fdo#103182] -> PASS{name}: This element is suppressed. This means it is ignored when
computing
the status of the difference (SUCCESS, WARNING, or
FAILURE).[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#103841]: https://bugs.freedesktop.org/show_bug.cgi?id=103841
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108965]: https://bugs.freedesktop.org/show_bug.cgi?id=108965
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271Participating hosts (42 -> 39)
------------------------------Additional (1): fi-kbl-7500u
Missing (4): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-
4200uBuild changes
-------------* Linux:
CI_DRM_5668->Patchwork_12322
CI_DRM_5668:f31df5b814fb600861b577e2bc2cdb75c8c3e323@git://anongit.freedesktop.org/gfx-ci/linux
IGT_4861:017d8461ae509b2d8ef5f585de8ad908081d28a0@git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12322:8c1a39496e922ad945fb891f7c5ecb36c2ff238f@git://anongit.freedesktop.org/gfx-ci/linux== Linux commits ==
8c1a39496e92drm/i915: Don't manually add connectors and planes stateae104db6497bdrm/i915: Fix atomic state leak when resetting HDMI link
Quoted 8 lines
== Logs ==
For more details see:
https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12322/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 15 lines · José Roberto de Souza
Atomic state needs to be put even if the commit was successful.
Fixes dba14b27dd3c ("drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD")Cc Ville Syrjälä <[email protected]>Cc Lyude Paul <[email protected]>Signed-off-by José Roberto de Souza <[email protected]>--- drivers/gpu/drm/i915/intel_ddi.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)drivers/gpu/drm/i915/intel_ddi.c +0
-0
drivers/gpu/drm/i915/intel_ddi.c static int modeset_pipe(struct drm_crtc *crtc, · line 3987
Quoted 10 lines
drivers/gpu/drm/i915/intel_ddi.c +1
-6@@ -3984,12 +3984,7 @@ static int modeset_pipe(struct drm_crtc *crtc, goto out; ret =drm_atomic_commit (state); -if (ret) - goto out; - -return 0 ; - - out: +out:
/me curses at that counterproductive codingstyle recommendation
Quoted 5 lines
drivers/gpu/drm/i915/intel_ddi.c +0
-0drm_atomic_state_put (state);return ret;Signature · 1 line
2.21.0
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link (rev2)
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link (rev2)
URL : https://patchwork.freedesktop.org/series/57318/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5682 -> Patchwork_12349
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://patchwork.freedesktop.org/api/1.0/series/57318/revisions/2/mbox/
Known issues
------------
Here are the changes found in Patchwork_12349 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@amdgpu/amd_basic@memory-alloc:
- fi-ivb-3520m: NOTRUN -> SKIP [fdo#109271] +48
* igt@amdgpu/amd_basic@userptr:
- fi-kbl-8809g: PASS -> DMESG-WARN [fdo#108965]
* igt@kms_busy@basic-flip-b:
- fi-gdg-551: PASS -> FAIL [fdo#103182]
* igt@kms_busy@basic-flip-c:
- fi-skl-6770hq: PASS -> SKIP [fdo#109271] / [fdo#109278] +2
* igt@kms_flip@basic-flip-vs-dpms:
- fi-skl-6770hq: PASS -> SKIP [fdo#109271] +33
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-b:
- fi-blb-e6850: PASS -> INCOMPLETE [fdo#107718]
#### Possible fixes ####
* igt@i915_selftest@live_execlists:
- fi-apl-guc: INCOMPLETE [fdo#103927] / [fdo#109720] -> PASS
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103182]: https://bugs.freedesktop.org/show_bug.cgi?id=103182
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#108569]: https://bugs.freedesktop.org/show_bug.cgi?id=108569
[fdo#108965]: https://bugs.freedesktop.org/show_bug.cgi?id=108965
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109294]: https://bugs.freedesktop.org/show_bug.cgi?id=109294
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109720]: https://bugs.freedesktop.org/show_bug.cgi?id=109720
Participating hosts (42 -> 40)
------------------------------
Additional (2): fi-icl-y fi-ivb-3520m
Missing (4): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-hsw-4200u
Build changes
-------------
* Linux: CI_DRM_5682 -> Patchwork_12349
CI_DRM_5682: e6481defd076c8507c8d5a503b2edd9c7a382ef7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4866: 189956af183c245eb237b3be4fa22953ec93bbe0 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12349: f6a63f57880dcfa00396a42b62b2f465ea56f2a3 @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
f6a63f57880d drm/i915: Don't manually add connectors and planes state cfc630b1ed47 drm/i915: Fix atomic state leak when resetting HDMI link
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12349/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link (rev2)
In reply to José Roberto de Souza== Series Details ==
== Series Details ==
Series: series starting with [1/2] drm/i915: Fix atomic state leak when resetting HDMI link (rev2)
URL : https://patchwork.freedesktop.org/series/57318/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_5682_full -> Patchwork_12349_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Known issues
------------
Here are the changes found in Patchwork_12349_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_cs_tlb@bsd2:
- shard-iclb: NOTRUN -> SKIP [fdo#109276] +5
* igt@gem_ctx_isolation@bcs0-clean:
- shard-iclb: NOTRUN -> SKIP [fdo#109281] +1
* igt@gem_exec_basic@basic-bsd1:
- shard-skl: NOTRUN -> SKIP [fdo#109271] +17
* igt@gem_exec_flush@basic-batch-kernel-default-cmd:
- shard-snb: NOTRUN -> SKIP [fdo#109271] +39
* igt@gem_mocs_settings@mocs-rc6-vebox:
- shard-iclb: NOTRUN -> SKIP [fdo#109287]
* igt@gen3_render_mixed_blits:
- shard-iclb: NOTRUN -> SKIP [fdo#109289]
* igt@i915_pm_rpm@gem-mmap-cpu:
- shard-iclb: PASS -> DMESG-WARN [fdo#107724]
* igt@i915_pm_rpm@modeset-lpsp:
- shard-skl: PASS -> INCOMPLETE [fdo#107807]
- shard-iclb: PASS -> INCOMPLETE [fdo#108840]
* igt@kms_busy@basic-flip-f:
- shard-skl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278]
* igt@kms_busy@extended-modeset-hang-newfb-render-d:
- shard-iclb: NOTRUN -> SKIP [fdo#109278]
* igt@kms_busy@extended-modeset-hang-newfb-render-f:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +1
* igt@kms_chamelium@dp-hpd-storm:
- shard-iclb: NOTRUN -> SKIP [fdo#109284] +1
* igt@kms_color@pipe-c-ctm-max:
- shard-skl: NOTRUN -> FAIL [fdo#108147]
* igt@kms_color@pipe-c-degamma:
- shard-apl: PASS -> FAIL [fdo#104782]
* igt@kms_cursor_crc@cursor-128x128-sliding:
- shard-apl: PASS -> FAIL [fdo#103232]
* igt@kms_cursor_crc@cursor-256x85-offscreen:
- shard-skl: NOTRUN -> FAIL [fdo#103232]
* igt@kms_cursor_crc@cursor-512x170-sliding:
- shard-iclb: NOTRUN -> SKIP [fdo#109279]
* igt@kms_cursor_legacy@2x-flip-vs-cursor-legacy:
- shard-iclb: NOTRUN -> SKIP [fdo#109274] +2
* igt@kms_cursor_legacy@2x-long-cursor-vs-flip-legacy:
- shard-hsw: PASS -> FAIL [fdo#105767]
* igt@kms_draw_crc@draw-method-xrgb8888-mmap-gtt-untiled:
- shard-skl: NOTRUN -> FAIL [fdo#108472]
* igt@kms_flip@2x-flip-vs-expired-vblank:
- shard-glk: PASS -> FAIL [fdo#105363]
* igt@kms_flip@flip-vs-expired-vblank:
- shard-iclb: PASS -> FAIL [fdo#105363]
* igt@kms_flip@flip-vs-expired-vblank-interruptible:
- shard-glk: PASS -> FAIL [fdo#102887] / [fdo#105363]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-mmap-gtt:
- shard-apl: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-fullscreen:
- shard-iclb: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-draw-pwrite:
- shard-glk: PASS -> FAIL [fdo#103167]
* igt@kms_frontbuffer_tracking@fbc-2p-primscrn-spr-indfb-fullscreen:
- shard-kbl: NOTRUN -> SKIP [fdo#109271] +18
* igt@kms_frontbuffer_tracking@fbc-badstride:
- shard-skl: NOTRUN -> FAIL [fdo#105682] +1
* igt@kms_frontbuffer_tracking@fbcpsr-2p-primscrn-cur-indfb-draw-render:
- shard-iclb: NOTRUN -> SKIP [fdo#109280] +8
* igt@kms_frontbuffer_tracking@fbcpsr-rgb565-draw-blt:
- shard-skl: PASS -> FAIL [fdo#105682]
* igt@kms_frontbuffer_tracking@psr-1p-offscren-pri-indfb-draw-mmap-wc:
- shard-skl: NOTRUN -> FAIL [fdo#103167] +3
* igt@kms_frontbuffer_tracking@psr-2p-primscrn-indfb-msflip-blt:
- shard-glk: NOTRUN -> SKIP [fdo#109271]
* igt@kms_pipe_crc_basic@read-crc-pipe-a-frame-sequence:
- shard-skl: NOTRUN -> FAIL [fdo#103191] / [fdo#107362]
* igt@kms_plane_alpha_blend@pipe-a-alpha-7efc:
- shard-skl: NOTRUN -> FAIL [fdo#107815] / [fdo#108145]
* igt@kms_plane_alpha_blend@pipe-a-coverage-7efc:
- shard-skl: PASS -> FAIL [fdo#107815] / [fdo#108145]
* igt@kms_plane_alpha_blend@pipe-b-alpha-7efc:
- shard-apl: PASS -> FAIL [fdo#108145]
* igt@kms_plane_alpha_blend@pipe-b-coverage-7efc:
- shard-skl: PASS -> FAIL [fdo#107815]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-max:
- shard-glk: PASS -> FAIL [fdo#108145]
* igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
- shard-skl: NOTRUN -> FAIL [fdo#108145]
* igt@kms_plane_multiple@atomic-pipe-b-tiling-x:
- shard-apl: PASS -> FAIL [fdo#103166] +3
- shard-iclb: NOTRUN -> FAIL [fdo#103166]
* igt@kms_plane_multiple@atomic-pipe-c-tiling-none:
- shard-iclb: PASS -> FAIL [fdo#103166] +2
* igt@kms_plane_multiple@atomic-pipe-c-tiling-x:
- shard-glk: PASS -> FAIL [fdo#103166] +2
* igt@kms_plane_scaling@pipe-b-plane-scaling:
- shard-snb: NOTRUN -> SKIP [fdo#109271] / [fdo#109278] +2
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-snb: PASS -> INCOMPLETE [fdo#105411]
* igt@prime_vgem@fence-write-hang:
- shard-iclb: NOTRUN -> SKIP [fdo#109295]
#### Possible fixes ####
* igt@gem_eio@reset-stress:
- shard-snb: FAIL [fdo#109661] -> PASS
* igt@gem_eio@suspend:
- shard-glk: INCOMPLETE [fdo#103359] / [k.org#198133] -> PASS
* igt@i915_pm_rpm@gem-execbuf:
- shard-skl: INCOMPLETE [fdo#107803] / [fdo#107807] -> PASS
* igt@i915_pm_rpm@legacy-planes-dpms:
- shard-iclb: DMESG-WARN [fdo#107724] -> PASS
* igt@i915_pm_rpm@universal-planes:
- shard-iclb: DMESG-WARN [fdo#107724] / [fdo#108654] / [fdo#108756] -> PASS
* igt@kms_ccs@pipe-a-crc-sprite-planes-basic:
- shard-glk: FAIL [fdo#108145] -> PASS
* igt@kms_cursor_crc@cursor-128x128-dpms:
- shard-apl: FAIL [fdo#103232] -> PASS
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-blt:
- shard-iclb: FAIL [fdo#103167] -> PASS +1
* igt@kms_frontbuffer_tracking@fbc-1p-primscrn-spr-indfb-draw-pwrite:
- shard-apl: FAIL [fdo#103167] -> PASS +1
- shard-glk: FAIL [fdo#103167] -> PASS
* igt@kms_plane@pixel-format-pipe-b-planes:
- shard-apl: FAIL [fdo#103166] -> PASS
* igt@kms_plane@pixel-format-pipe-b-planes-source-clamping:
- shard-glk: FAIL [fdo#108948] -> PASS
* igt@kms_plane_multiple@atomic-pipe-b-tiling-yf:
- shard-iclb: FAIL [fdo#103166] -> PASS
* igt@kms_psr@no_drrs:
- shard-iclb: FAIL [fdo#108341] -> PASS
* igt@kms_vblank@pipe-b-ts-continuation-suspend:
- shard-kbl: INCOMPLETE [fdo#103665] -> PASS +1
#### Warnings ####
* igt@i915_pm_backlight@fade_with_suspend:
- shard-iclb: INCOMPLETE [fdo#107713] / [fdo#107820] -> FAIL [fdo#107847]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#102887]: https://bugs.freedesktop.org/show_bug.cgi?id=102887
[fdo#103166]: https://bugs.freedesktop.org/show_bug.cgi?id=103166
[fdo#103167]: https://bugs.freedesktop.org/show_bug.cgi?id=103167
[fdo#103191]: https://bugs.freedesktop.org/show_bug.cgi?id=103191
[fdo#103232]: https://bugs.freedesktop.org/show_bug.cgi?id=103232
[fdo#103359]: https://bugs.freedesktop.org/show_bug.cgi?id=103359
[fdo#103665]: https://bugs.freedesktop.org/show_bug.cgi?id=103665
[fdo#104782]: https://bugs.freedesktop.org/show_bug.cgi?id=104782
[fdo#105363]: https://bugs.freedesktop.org/show_bug.cgi?id=105363
[fdo#105411]: https://bugs.freedesktop.org/show_bug.cgi?id=105411
[fdo#105682]: https://bugs.freedesktop.org/show_bug.cgi?id=105682
[fdo#105767]: https://bugs.freedesktop.org/show_bug.cgi?id=105767
[fdo#107362]: https://bugs.freedesktop.org/show_bug.cgi?id=107362
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#107803]: https://bugs.freedesktop.org/show_bug.cgi?id=107803
[fdo#107807]: https://bugs.freedesktop.org/show_bug.cgi?id=107807
[fdo#107815]: https://bugs.freedesktop.org/show_bug.cgi?id=107815
[fdo#107820]: https://bugs.freedesktop.org/show_bug.cgi?id=107820
[fdo#107847]: https://bugs.freedesktop.org/show_bug.cgi?id=107847
[fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
[fdo#108147]: https://bugs.freedesktop.org/show_bug.cgi?id=108147
[fdo#108341]: https://bugs.freedesktop.org/show_bug.cgi?id=108341
[fdo#108472]: https://bugs.freedesktop.org/show_bug.cgi?id=108472
[fdo#108654]: https://bugs.freedesktop.org/show_bug.cgi?id=108654
[fdo#108756]: https://bugs.freedesktop.org/show_bug.cgi?id=108756
[fdo#108840]: https://bugs.freedesktop.org/show_bug.cgi?id=108840
[fdo#108948]: https://bugs.freedesktop.org/show_bug.cgi?id=108948
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109276]: https://bugs.freedesktop.org/show_bug.cgi?id=109276
[fdo#109278]: https://bugs.freedesktop.org/show_bug.cgi?id=109278
[fdo#109279]: https://bugs.freedesktop.org/show_bug.cgi?id=109279
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109281]: https://bugs.freedesktop.org/show_bug.cgi?id=109281
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109287]: https://bugs.freedesktop.org/show_bug.cgi?id=109287
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109661]: https://bugs.freedesktop.org/show_bug.cgi?id=109661
[k.org#198133]: https://bugzilla.kernel.org/show_bug.cgi?id=198133
Participating hosts (7 -> 7)
------------------------------
No changes in participating hosts
Build changes
-------------
* Linux: CI_DRM_5682 -> Patchwork_12349
CI_DRM_5682: e6481defd076c8507c8d5a503b2edd9c7a382ef7 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_4866: 189956af183c245eb237b3be4fa22953ec93bbe0 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_12349: f6a63f57880dcfa00396a42b62b2f465ea56f2a3 @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_12349/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx