completion.commands does not remove multiple commands
Hi,
I was playing with the completion.commands config added in 6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) and noticed an issue removing multiple commands.
I wanted to remove completion for cherry and mergetool, so I added them both to the config:
git config completion.commands "-cherry -mergetool"
But git still completes cherry in this case, only removing mergetool. Swapping the items in the config yields the opposite result (cherry is removed and mergetool is not).
With luck this will be a clear and easily resolved issue in list_cmds_by_config() (in help.c).
Here's an example in test form:
-- 8< --
t/t9902-completion.sh +8 -0
@@ -1483,6 +1483,14 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' +test_expect_failure 'completion.commands removes multiple commands' ' + test_config completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config | + grep ^cherry >actual && + echo cherry-pick >expected && + test_cmp expected actual +' + test_expect_success 'setup for integration tests' ' echo content >file1 && echo more >file2 &&
-- 8< --
That's not quite normal form for t9902, but I was undable to create a working test using the test_completion functions. The tests set GIT_TESTING_PORCELAIN_COMMAND_LIST and GIT_TESTING_ALL_COMMAND_LIST which override the settings in the completion script. I played a bit with adjusting those to add cherry{,-pick} to the command lists, unsetting those vars for the test, and such, to no avail.
In the end, I'm not really sure that calling --list-cmds directly is such a bad way to go for testing this issue.
Signature · 1 line
Todd
Quoted 7 lines · Todd Zullinger
Hi,
I was playing with the completion.commands config added in
6532f3740b("completion: allow to customize the completable command list", 2018-05-20) and noticed an issue removing multiple commands.
Quoted 8 lines
I wanted to remove completion for cherry and mergetool, so I added them both to the config:
git config completion.commands "-cherry -mergetool"
But git still completes cherry in this case, only removing mergetool. Swapping the items in the config yields the opposite result (cherry is removed and mergetool is not).
I can reproduce your problem, though the test you included passes for me even with the current tip of master. I suspect this is the problem:
help.c +2 -2
@@ -393,8 +393,8 @@ void list_cmds_by_config(struct string_list *list)const char *p =strchrnul (cmd_list,' ' );strbuf_add (&sb, cmd_list, p - cmd_list); -if (*cmd_list =='-' ) -string_list_remove (list, cmd_list +1 ,0 ); +if (sb.buf[0 ] =='-' ) +string_list_remove (list, sb.buf +1 ,0 );else string_list_insert (list, sb.buf);strbuf_release (&sb);
though I can't help but wonder if the whole thing would be simpler using string_list_split().
-Peff
Quoted 2 lines · Jeff King
I can reproduce your problem, though the test you included passes for me even with the current tip of master.
Oh, hrm. I think the issue is that completion.commands needs to be set in the global (or system-wide) config, via test_config_global rather than the local repo config which test_config sets.
In hindsight, that seems obvious. But it's probably worth noting that where completion.commands is documented, for anyone who might spend a few cycles trying to configure it on a per-repo basis before realizing it doesn't work.
Quoted 18 lines
I suspect this is the problem:
help.c +2
-2@@ -393,8 +393,8 @@ void list_cmds_by_config(struct string_list *list)const char *p =strchrnul (cmd_list,' ' );strbuf_add (&sb, cmd_list, p - cmd_list); -if (*cmd_list =='-' ) -string_list_remove (list, cmd_list +1 ,0 ); +if (sb.buf[0 ] =='-' ) +string_list_remove (list, sb.buf +1 ,0 );else string_list_insert (list, sb.buf);strbuf_release (&sb);
Quoted 2 lines
though I can't help but wonder if the whole thing would be simpler using
string_list_split().
That does indeed fix things (as does SZEDER's similar version, which arrived only a few seconds later). Thanks to both of you for the very quick replies!
I'll leave it to those who know better to follow up with a change to use string_list_split().
Here's a first stab at improving the docs and fixing the bug.
Jeff King (1):
completion: fix multiple command removals
Todd Zullinger (2):
doc: note config file restrictions for completion.commands
t9902: test multiple removals via completion.commands
Documentation/config/completion.txt | 3 ++- Documentation/git.txt | 3 ++- help.c | 4 ++-- t/t9902-completion.sh | 8 ++++++++ 4 files changed, 14 insertions(+), 4 deletions(-)
Published-as: https://github.com/tmzullinger/git/releases/tag/completion.commands-v1
Signature · 1 line
Todd
Quoted 4 lines · Todd Zullinger
Quoted 2 lines · Jeff King
I can reproduce your problem, though the test you included passes for me even with the current tip of master.
Quoted 8 lines
Oh, hrm. I think the issue is that completion.commands needs to be set in the global (or system-wide) config, via
test_config_globalrather than the local repo config whichtest_configsets.In hindsight, that seems obvious. But it's probably worth noting that where completion.commands is documented, for anyone who might spend a few cycles trying to configure it on a per-repo basis before realizing it doesn't work.
I think this is actually a bug. Normally code that is checking config before we've decide to do setup_git_directory() would use read_early_config(), which uses discover_git_directory() to tentatively see if we're in a repo, and if so to add it to the config sequence.
But this code uses the caching configset mechanism. And that code (rightly) does not use read_early_config(), because it has no idea if it's being called early or what.
I think we probably ought to be doing something like this:
git.c +7 -0
@@ -62,6 +62,13 @@ static int list_cmds(const char *spec) {struct string_list list =STRING_LIST_INIT_DUP ;int i; +int nongit; + +/* +* Set up the repository so we can pick up any repo-level config (like +* completion.commands). +*/ +setup_git_directory_gently (&nongit);while (*spec) {const char *sep =strchrnul (spec,',' );
Quoted 2 lines
I'll leave it to those who know better to follow up with a change to use
string_list_split().
It's less of an improvement than I'd hoped, since most of the code is actually handling the "-" thing. So I don't think it's really worth the churn. But here's what it looks like for reference:
--- help.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-)
help.c +11 -13
@@ -373,7 +373,9 @@ void list_cmds_by_category(struct string_list *list,void list_cmds_by_config (struct string_list *list) { -const char *cmd_list; +const char *cmd_str; +struct string_list cmd_list =STRING_LIST_INIT_DUP ; +int i;/* * There's no actual repository setup at this point (and even
@@ -382,26 +384,22 @@ void list_cmds_by_config(struct string_list *list)* too since the caller (git --list-cmds=) should exit shortly * anyway. */ -if (git_config_get_string_const ("completion.commands" , &cmd_list)) +if (git_config_get_string_const ("completion.commands" , &cmd_str))return ;string_list_sort (list);string_list_remove_duplicates (list,0 ); -while (*cmd_list) { -struct strbuf sb =STRBUF_INIT ; -const char *p =strchrnul (cmd_list,' ' ); +string_list_split (&cmd_list, cmd_str,' ' ,-1 ); +for (i =0 ; i < cmd_list.nr; i++) { +const char *cmd = cmd_list.items[0 ].string; -strbuf_add (&sb, cmd_list, p - cmd_list); -if (sb.buf[0 ] =='-' ) -string_list_remove (list, sb.buf +1 ,0 ); +if (*cmd =='-' ) +string_list_remove (list, cmd +1 ,0 );else -string_list_insert (list, sb.buf); -strbuf_release (&sb); -while (*p ==' ' ) - p++; - cmd_list = p; +string_list_insert (list, cmd); } +string_list_clear (&cmd_list,0 ); }void list_common_guides_help (void )
Quoted 34 lines · Jeff King
Quoted 4 lines · Todd Zullinger
Quoted 2 lines · Jeff King
I can reproduce your problem, though the test you included passes for me even with the current tip of master.
Quoted 8 lines
Oh, hrm. I think the issue is that completion.commands needs to be set in the global (or system-wide) config, via
test_config_globalrather than the local repo config whichtest_configsets.In hindsight, that seems obvious. But it's probably worth noting that where completion.commands is documented, for anyone who might spend a few cycles trying to configure it on a per-repo basis before realizing it doesn't work.
I think this is actually a bug. Normally code that is checking config before we've decide to do
setup_git_directory()would useread_early_config(), which usesdiscover_git_directory()to tentatively see if we're in a repo, and if so to add it to the config sequence.But this code uses the caching configset mechanism. And that code (rightly) does not use
read_early_config(), because it has no idea if it's being called early or what.I think we probably ought to be doing something like this:
git.c +0
-0@@ -62,6 +62,13 @@ static int list_cmds(const char *spec) {struct string_list list =STRING_LIST_INIT_DUP ;int i;
git.c static int list_cmds(const char *spec) · line 74
Quoted 10 lines
git.c +7
-0+int nongit; + +/* +* Set up the repository so we can pick up any repo-level config (like +* completion.commands). +*/ +setup_git_directory_gently (&nongit);while (*spec) {const char *sep =strchrnul (spec,',' );
Hmm. The comments in list_cmds_by_config() made me wonder if not using a local repo config was intentional:
/*
* There's no actual repository setup at this point (and even
* if there is, we don't really care; only global config
* matters). If we accidentally set up a repository, it's ok
* too since the caller (git --list-cmds=) should exit shortly
* anyway.
*/
Is the cost of setting up a repository something which might noticeably slow down interactive completion? In my testing today I haven't felt it, but I have loads of memory on this system.
I did apply your change and that allows the test to use test_config() rather than test_config_global(). The full test suite passes, so the change doesn't trigger any new issues we have covered by a test, at least.
If we wanted to respect local configs, how does this look?
-- 8< --
From: Jeff King <[email protected]>
Subject: [PATCH] git: read local config in --list-cmds
Normally code that is checking config before we've decide to do setup_git_directory() would use read_early_config(), which uses discover_git_directory() to tentatively see if we're in a repo, and if so to add it to the config sequence.
But list_cmds() uses the caching configset mechanism and (rightly) does not use read_early_config(), because it has no idea if it's being called early.
Call setup_git_directory_gently() so we can pick up repo-level config (like completion.commands).
--- git.c | 7 +++++++ 1 file changed, 7 insertions(+)
git.c +7 -0
@@ -62,6 +62,13 @@ static int list_cmds(const char *spec) {struct string_list list =STRING_LIST_INIT_DUP ;int i; +int nongit; + +/* +* Set up the repository so we can pick up any repo-level config (like +* completion.commands). +*/ +setup_git_directory_gently (&nongit);while (*spec) {const char *sep =strchrnul (spec,',' );
-- 8< --
Signature · 1 line
Todd
Quoted 10 lines · Todd Zullinger
Hmm. The comments in
list_cmds_by_config()made me wonder if not using a local repo config was intentional:/*
* There's no actual repository setup at this point (and even
* if there is, we don't really care; only global config
* matters). If we accidentally set up a repository, it's ok
* too since the caller (git --list-cmds=) should exit shortly
* anyway.
*/
Well, let's see what Duy says. :)
I've never used completion.commands myself, but it seems reasonable that somebody might want different completion in different repos (e.g., if they never use "mergetool" in one repo, but do in another).
Quoted 4 lines
Is the cost of setting up a repository something which might noticeably slow down interactive completion? In my testing today I haven't felt it, but I have loads of memory on this system.
I'd doubt it. It is a few syscalls (and might have to walk up the filesystem if you're not actually in a repository), but it's something that basically every Git process does, and I don't think it's ever been noticeable.
Quoted 6 lines
I did apply your change and that allows the test to use
test_config()rather thantest_config_global(). The full test suite passes, so the change doesn't trigger any new issues we have covered by a test, at least.If we wanted to respect local configs, how does this look?
Looks good, with two minor commit message nits:
Quoted 5 lines
-- 8< --
From: Jeff King <[email protected]>
Subject: [PATCH] git: read local config in --list-cmdsNormally code that is checking config before we've decide to do
s/decide/&d/
Quoted 7 lines
setup_git_directory()would useread_early_config(), which usesdiscover_git_directory()to tentatively see if we're in a repo, and if so to add it to the config sequence.But
list_cmds()uses the caching configset mechanism and (rightly) does not useread_early_config(), because it has no idea if it's being called early.
I'd say "mechanism _which_ rightly does not use read_early_config..." to make it clear we're talking about configset, not list_cmds().
-Peff
Quoted 14 lines · Jeff King
Quoted 10 lines · Todd Zullinger
Hmm. The comments in
list_cmds_by_config()made me wonder if not using a local repo config was intentional:/*
* There's no actual repository setup at this point (and even
* if there is, we don't really care; only global config
* matters). If we accidentally set up a repository, it's ok
* too since the caller (git --list-cmds=) should exit shortly
* anyway.
*/
Quoted 1 line
Well, let's see what Duy says. :)
I vaguely recall that I wanted to cache the results in git-completion.bash at some point. But looking at that script I don't think there's any caching. So yes it should be ok to read per-repo config as well (and adjust or drop this comment block)
Quoted 3 lines
I've never used completion.commands myself, but it seems reasonable that somebody might want different completion in different repos (e.g., if they never use "mergetool" in one repo, but do in another).
It sounds to me confusing that you want different command sets in different repos. Which is why I made it global config only. But I suspect that people who have per-repo aliases may find this natural. So yeah, no objection.
PS. and thanks for the bug fix.
Signature · 1 line
Duy
Quoted 10 lines · Todd Zullinger
Hmm. The comments in
list_cmds_by_config()made me wonder if not using a local repo config was intentional:/*
* There's no actual repository setup at this point (and even
* if there is, we don't really care; only global config
* matters). If we accidentally set up a repository, it's ok
* too since the caller (git --list-cmds=) should exit shortly
* anyway.
*/
Doesn't the output from list-cmds-by-config get cached at the completion script layer in $__git_blah variables, and the cached values are not cleared when you chdir around? If you allowed the repo-specific configuration to affect its output, the cached values need to be reset when you cross repository boundaries. Otherwise you'd see complaints like "I have this in repo A but not in repo B; when I start from repo A, it gets completed even after I go to repo B. If I start from repo B, I do not get completion in either of them" (the former is because repo-A specific result gets cached, the latter is because the cache is populated with the result taken in repo-B that doesn't have customization and stays around even when you visit repo-B).
I think it is a sensible design decision to forbid per-repo config to relieve us from having to worry about when to invalidate the cache and all associated complexities.
Hi,
Quoted 13 lines · Junio C Hamano
Quoted 10 lines · Todd Zullinger
Hmm. The comments in
list_cmds_by_config()made me wonder if not using a local repo config was intentional:/*
* There's no actual repository setup at this point (and even
* if there is, we don't really care; only global config
* matters). If we accidentally set up a repository, it's ok
* too since the caller (git --list-cmds=) should exit shortly
* anyway.
*/
Quoted 3 lines
Doesn't the output from list-cmds-by-config get cached at the completion script layer in $__git_blah variables, and the cached values are not cleared when you chdir around?
In testing, I didn't find any evidence of caching. Setting commands to be added and removed in the global and local configs worked reasonably.
Duy's reply suggests that was considered but not implemented. I there were caching (and if it were tedious for the completion code to keep fresh between repos), then it would a bad plan to allow per-repo config.
If there was a goal of adding such caching it might also make sense to avoid "fixing" the code here to allow per-repo config before it's known how that might affect such caching.
It sounds like that's not something Duy is planning on for the near term though, so perhaps we're fine to allow local repo config here? As Duy mentioned, maybe some users with local aliases want to add them to the completion locally as well.
If we choose to avoid local repo config then we can add a comment to the documetation like I had in 2/3. Maybe also update the comment in list_cmds_by_config() to note that we intentionally don't setup a repo -- or a similar comment in list_cmds(), where Jeff's 1/3 was adding setup_git_directory_gently().
I don't have a strong opinion either way. I more or less have the minor patches for either direction at this point.
Thanks,
Signature · 1 line
Todd
Quoted 20 lines · Todd Zullinger
Hi,
Quoted 13 lines · Junio C Hamano
Quoted 10 lines · Todd Zullinger
Hmm. The comments in
list_cmds_by_config()made me wonder if not using a local repo config was intentional:/*
* There's no actual repository setup at this point (and even
* if there is, we don't really care; only global config
* matters). If we accidentally set up a repository, it's ok
* too since the caller (git --list-cmds=) should exit shortly
* anyway.
*/Quoted 3 lines
Doesn't the output from list-cmds-by-config get cached at the completion script layer in $__git_blah variables, and the cached values are not cleared when you chdir around?
Quoted 8 lines
In testing, I didn't find any evidence of caching. Setting commands to be added and removed in the global and local configs worked reasonably.
Duy's reply suggests that was considered but not implemented. I there were caching (and if it were tedious for the completion code to keep fresh between repos), then it would a bad plan to allow per-repo config.
The completion script used to cache the list of porcelain commands, but then Duy came along and removed it in 3301d36b29 (completion: add and use --list-cmds=alias, 2018-05-20).
We cached the commands, because it was a bit involved to get them:
first we run 'git help -a' to list all commands, then extracted the command names from the help output with 'grep', and finally an enormous case statement removed all plumbing commands. Caching spared us the overhead of these external processes and maybe 2-3 subshells. Note that because of this caching if you dropped a third-party 'git-foo' command in your $PATH, it didn't show up in completion until you re-sourced the completion script, which was the standard way to invalidate/refresh the caches.
However, even when we cached porcelain commands, we didn't cache aliases, even though getting them is a bit involved as well, requiring running 'git config', two subshells and a shell loop. I presume that back then the reason for not caching aliases was that they could be repo-specific.
Now, ever since Duy revamped commands completion, we only run a simple $(git --list-cmds=...), i.e. a git command and a subshell takes care of all that. IMO this is the best we ever had, because it uses one less subshell than before to list both commands and aliases, and it lists everything afresh, including third-party 'git-foo' commands.
I don't see the benefit of bringing back caching. Yes, on one hand we could complete commands with a single variable expansion, which is clearly faster than that $(git --list-cmds=...). OTOH, that's only commands, but what about aliases? If we cache aliases, too, then that could be considered a regression by those who do have repo-specific aliases; if we don't, then we are back at running 'git config' and two subshells, i.e. one subshell more than we currently have.
And if we won't cache commands, then we might as well modify list_cmds_by_config() to read 'completion.commands' from the repo-specific config, too. I'm fairly neutral on this, because I can only imagine rather convoluted scenarios where a repo-specific command list would be useful, but at least it would make it consistent with aliases, which we read from the current repo's config and we always have.
Note, however, that for completeness sake, if we choose to update list_cmds_by_config() to read the repo's config as well, then we should also update the completion script to run $(__git --list-cmds=...), note the two leading underscores, so in case of 'git -C over/there <TAB>' it would read 'completion.commands' from the right repository.
SZEDER Gábor wrote:
[... lots of good history ...]
Thanks for an excellent summary!
Quoted 6 lines
Note, however, that for completeness sake, if we choose to update
list_cmds_by_config()to read the repo's config as well, then we should also update the completion script to run $(__git --list-cmds=...), note the two leading underscores, so in case of 'git -C over/there <TAB>' it would read 'completion.commands' from the right repository.
Thanks for pointing this out. I'll add that to my local branch for the "respect local config" case.
At the moment, I think it only matters for calls where config is in the --list-cmds list. But since the fix Jeff suggested affects all --list-cmds calls, it seems prudent to adjust the 3-4 other uses of --list-cmds in the completion script. Let me know if you see a reason not to do that.
Thanks again for such a nice summary,
Signature · 1 line
Todd
Quoted 4 lines · SZEDER Gábor
The completion script used to cache the list of porcelain commands, but then Duy came along and removed it in
3301d36b29(completion: add and use --list-cmds=alias, 2018-05-20).
[...]
Thanks for this summary.
Just for the record, as the person who suggested that we should respect repo config here, I don't personally care all that much either way. I do not plan to use the feature myself, but it was just what I would have expected to happen. So I can live with it either way.
That said, it seems like if we were to go back to caching, we'd need to handle directory changes in order for aliases (which already do respect repo config) to be correct anyway. So it doesn't seem like this is introducing any burden that was not there already.
-Peff
PATCH 1/3 doc: note config file restrictions for completion.commands
In reply to Jeff KingThe completion.commands config var must be set in either the system-wide or global config file. The completion script does not read a local repository config.
--- Documentation/config/completion.txt | 3 ++- Documentation/git.txt | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)
Documentation/config/completion.txt +2 -1
@@ -4,4 +4,5 @@ completion.commands:: porcelain commands and a few select others are completed. You can add more commands, separated by space, in this variable. Prefixing the command with '-' will remove it from - the existing list. + the existing list. The variable must be set in either the + system-wide or global config.
Documentation/git.txt +2 -1
@@ -172,7 +172,8 @@ foo.bar= ...`) sets `foo.bar` to the empty string which `git config others (all other commands in `$PATH` that have git- prefix), list-<category> (see categories in command-list.txt), nohelpers (exclude helper commands), alias and config - (retrieve command list from config variable completion.commands) + (retrieve command list from config variable completion.commands, + set in the global or system-wide config file) GIT COMMANDS ------------
Re: [PATCH 1/3] doc: note config file restrictions for completion.commands
Poking this thread before it goes completely dead...
Quoted 4 lines · Todd Zullinger
The completion.commands config var must be set in either the system-wide or global config file. The completion script does not read a local repository config.
After the last discussion, I think the consensus was it's ok to allow per-repo config so we can just drop this and update the code to read from any config file, right?
Quoted 32 lines
Signed-off-by Todd Zullinger <[email protected]>--- Documentation/config/completion.txt | 3 ++- Documentation/git.txt | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-)Documentation/config/completion.txt +2
-1@@ -4,4 +4,5 @@ completion.commands:: porcelain commands and a few select others are completed. You can add more commands, separated by space, in this variable. Prefixing the command with '-' will remove it from - the existing list. + the existing list. The variable must be set in either the + system-wide or global config.Documentation/git.txt +2
-1@@ -172,7 +172,8 @@ foo.bar= ...`) sets `foo.bar` to the empty string which `git config others (all other commands in `$PATH` that have git- prefix), list-<category> (see categories in command-list.txt), nohelpers (exclude helper commands), alias and config - (retrieve command list from config variable completion.commands) + (retrieve command list from config variable completion.commands, + set in the global or system-wide config file) GIT COMMANDS ------------
Signature · 1 line
Duy
PATCH v2 1/4 git: read local config in --list-cmds
From: Jeff King <[email protected]>
Normally code that is checking config before we've decided to do setup_git_directory() would use read_early_config(), which uses discover_git_directory() to tentatively see if we're in a repo, and if so to add it to the config sequence.
But list_cmds() uses the caching configset mechanism which rightly does not use read_early_config(), because it has no idea if it's being called early.
Call setup_git_directory_gently() so we can pick up repo-level config (like completion.commands).
--- git.c | 7 +++++++ 1 file changed, 7 insertions(+)
git.c +7 -0
@@ -62,6 +62,13 @@ static int list_cmds(const char *spec) {struct string_list list =STRING_LIST_INIT_DUP ;int i; +int nongit; + +/* +* Set up the repository so we can pick up any repo-level config (like +* completion.commands). +*/ +setup_git_directory_gently (&nongit);while (*spec) {const char *sep =strchrnul (spec,',' );
Re: [PATCH v2 1/4] git: read local config in --list-cmds
Quoted 25 lines · Todd Zullinger
From: Jeff King <[email protected]>
Normally code that is checking config before we've decided to do
setup_git_directory()would useread_early_config(), which usesdiscover_git_directory()to tentatively see if we're in a repo, and if so to add it to the config sequence.But
list_cmds()uses the caching configset mechanism which rightly does not useread_early_config(), because it has no idea if it's being called early.Call
setup_git_directory_gently()so we can pick up repo-level config (like completion.commands).Signed-off-by Jeff King <[email protected]>--- git.c | 7 +++++++ 1 file changed, 7 insertions(+)git.c +0
-0
git.c static int list_cmds(const char *spec) · line 71
Quoted 10 lines
git.c +7
-0@@ -62,6 +62,13 @@ static int list_cmds(const char *spec) {struct string_list list =STRING_LIST_INIT_DUP ;int i; +int nongit; + +/* +* Set up the repository so we can pick up any repo-level config (like +* completion.commands). +*/ +setup_git_directory_gently (&nongit);
This gave me a pause because we could try to find .git more than necessary (e.g. when --list-cmds is requested without "config"). But I don't think that happens often enough to be worried about.
It also subtly changes list_aliases() code flow, because the read_early_config() call inside will use the already-discovered gitdir
here instead of trying to rediscover. So, everything is still fine.
You probably want to drop the comment block about repository setup inside list_cmds_by_config() too.
Quoted 3 lines
git.c +0
-0while (*spec) {const char *sep =strchrnul (spec,',' );
Signature · 1 line
Duy
v3 cover completion.commands: fix multiple command removals
Hi,
Quoted 2 lines · Duy Nguyen
You probably want to drop the comment block about repository setup inside
list_cmds_by_config()too.
You're right, of course. Thanks Duy. :)
That's the only change since v2.
Other than a follow-up to update the commit reference in 4/4 after 1/4 is in the final form on pu, I think this might be good. If it's easier, we can skip 4/4 and I'll resend it after the others are on pu.
Jeff King (2):
git: read local config in --list-cmds
completion: fix multiple command removals
Todd Zullinger (2):
t9902: test multiple removals via completion.commands
completion: use __git when calling --list-cmds
contrib/completion/git-completion.bash | 8 ++++---- git.c | 7 +++++++ help.c | 11 ++--------- t/t9902-completion.sh | 6 ++++++ 4 files changed, 19 insertions(+), 13 deletions(-)
Range-diff against v2:
1: e51bdea6d3 ! 1: 6e9872b0e3 git: read local config in --list-cmds
@@ -33,3 +33,21 @@
while (*spec) {
const char *sep = strchrnul(spec, ',');
+
+ diff --git a/help.c b/help.c
+ --- a/help.c
+ +++ b/help.c
+@@
+ {
+ const char *cmd_list;
+
+- /*
+- * There's no actual repository setup at this point (and even
+- * if there is, we don't really care; only global config
+- * matters). If we accidentally set up a repository, it's ok
+- * too since the caller (git --list-cmds=) should exit shortly
+- * anyway.
+- */
+ if (git_config_get_string_const("completion.commands", &cmd_list))
+ return;
+
2: 2f5e9da9de = 2: 6873ae3868 t9902: test multiple removals via completion.commands 3: 7548dcc23f = 3: f66bbc0b55 completion: fix multiple command removals 4: 26bef0b2af = 4: 197b176483 completion: use __git when calling --list-cmds
Re: [PATCH v3 0/4] completion.commands: fix multiple command removals
Quoted 4 lines · Todd Zullinger
Other than a follow-up to update the commit reference in 4/4 after 1/4 is in the final form on pu, I think this might be good. If it's easier, we can skip 4/4 and I'll resend it after the others are on pu.
A series that makes a single topic should expect to be read by a reader who understand the context of individual pieces in the topic, so it is more common to refer to an earlier step of a series from a later step without the object name. I would have written the log message like so instead:
completion: use __git when calling --list-cmds
As we made --list-cmds read the local configuration file in an earlier step, the completion.commands variable respects repo-level configuration. Use __git which ensures that the proper repo config is consulted if the command line contains 'git -C /some/other/repo'.
The whole series looks good to me. Thanks for working on it.
Re: [PATCH v3 0/4] completion.commands: fix multiple command removals
Quoted 13 lines · Junio C Hamano
Quoted 4 lines · Todd Zullinger
Other than a follow-up to update the commit reference in 4/4 after 1/4 is in the final form on pu, I think this might be good. If it's easier, we can skip 4/4 and I'll resend it after the others are on pu.
A series that makes a single topic should expect to be read by a reader who understand the context of individual pieces in the topic, so it is more common to refer to an earlier step of a series from a later step without the object name. I would have written the log message like so instead:
Quoted 8 lines
completion: use
__gitwhen calling --list-cmdsAs we made --list-cmds read the local configuration file in an earlier step, the completion.commands variable respects repo-level configuration. Use
__gitwhich ensures that the proper repo config is consulted if the command line contains 'git -C /some/other/repo'.The whole series looks good to me. Thanks for working on it.
Thank you for amending the commit message, and to Jeff, Duy, Eric, and Gábor for all the help.
Signature · 1 line
Todd
Re: [PATCH v3 0/4] completion.commands: fix multiple command removals
In reply to Todd ZullingerQuoted 10 lines · Todd Zullinger
Hi,
Quoted 2 lines · Duy Nguyen
You probably want to drop the comment block about repository setup inside
list_cmds_by_config()too.You're right, of course. Thanks Duy. :)
That's the only change since v2.
The range-diff looks obviously correct. Thanks!
Signature · 1 line
Duy
PATCH v3 1/4 git: read local config in --list-cmds
In reply to Duy NguyenFrom: Jeff King <[email protected]>
Normally code that is checking config before we've decided to do setup_git_directory() would use read_early_config(), which uses discover_git_directory() to tentatively see if we're in a repo, and if so to add it to the config sequence.
But list_cmds() uses the caching configset mechanism which rightly does not use read_early_config(), because it has no idea if it's being called early.
Call setup_git_directory_gently() so we can pick up repo-level config (like completion.commands).
--- git.c | 7 +++++++ help.c | 7 ------- 2 files changed, 7 insertions(+), 7 deletions(-)
git.c +7 -0
@@ -62,6 +62,13 @@ static int list_cmds(const char *spec) {struct string_list list =STRING_LIST_INIT_DUP ;int i; +int nongit; + +/* +* Set up the repository so we can pick up any repo-level config (like +* completion.commands). +*/ +setup_git_directory_gently (&nongit);while (*spec) {const char *sep =strchrnul (spec,',' );
help.c +0 -7
@@ -375,13 +375,6 @@ void list_cmds_by_config(struct string_list *list) {const char *cmd_list; -/* -* There's no actual repository setup at this point (and even -* if there is, we don't really care; only global config -* matters). If we accidentally set up a repository, it's ok -* too since the caller (git --list-cmds=) should exit shortly -* anyway. -*/ if (git_config_get_string_const ("completion.commands" , &cmd_list))return ;
PATCH v3 2/4 t9902: test multiple removals via completion.commands
In reply to Duy Nguyen6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) added the completion.commands config variable. Multiple commands may be added or removed, separated by a space.
Demonstrate the failure of multiple removals.
--- t/t9902-completion.sh | 6 ++++++ 1 file changed, 6 insertions(+)
t/t9902-completion.sh +6 -0
@@ -1483,6 +1483,12 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' +test_expect_failure 'completion.commands removes multiple commands' ' + test_config completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config >out && + ! grep -E "^(cherry|mergetool)$" out +' + test_expect_success 'setup for integration tests' ' echo content >file1 && echo more >file2 &&
PATCH v3 3/4 completion: fix multiple command removals
In reply to Duy NguyenFrom: Jeff King <[email protected]>
Commit 6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) tried to allow multiple space-separated entries in completion.commands. To do this, it copies each parsed token into a strbuf so that the result is NUL-terminated.
However, for tokens starting with "-", it accidentally passes the original non-terminated string, meaning that only the final one worked. Switch to using the strbuf.
--- help.c | 4 ++-- t/t9902-completion.sh | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
help.c +2 -2
@@ -386,8 +386,8 @@ void list_cmds_by_config(struct string_list *list)const char *p =strchrnul (cmd_list,' ' );strbuf_add (&sb, cmd_list, p - cmd_list); -if (*cmd_list =='-' ) -string_list_remove (list, cmd_list +1 ,0 ); +if (sb.buf[0 ] =='-' ) +string_list_remove (list, sb.buf +1 ,0 );else string_list_insert (list, sb.buf);strbuf_release (&sb);
t/t9902-completion.sh +1 -1
@@ -1483,7 +1483,7 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' -test_expect_failure 'completion.commands removes multiple commands' ' +test_expect_success 'completion.commands removes multiple commands' ' test_config completion.commands "-cherry -mergetool" && git --list-cmds=list-mainporcelain,list-complete,config >out && ! grep -E "^(cherry|mergetool)$" out
PATCH v3 4/4 completion: use __git when calling --list-cmds
In reply to Duy NguyenSince e51bdea6d3 ("git: read local config in --list-cmds", 2019-03-01), the completion.commands variable respects repo-level configuration. Use __git which ensures that the proper repo config is consulted if the command line contains 'git -C /some/other/repo'.
--- contrib/completion/git-completion.bash | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
contrib/completion/git-completion.bash +4 -4
@@ -1010,7 +1010,7 @@ __git_all_commands= __git_compute_all_commands () { test -n "$__git_all_commands" || - __git_all_commands=$(git --list-cmds=main,others,alias,nohelpers) + __git_all_commands=$(__git --list-cmds=main,others,alias,nohelpers) } # Lists all set config variables starting with the given section prefix,
@@ -1620,9 +1620,9 @@ _git_help () esac if test -n "$GIT_TESTING_ALL_COMMAND_LIST" then - __gitcomp "$GIT_TESTING_ALL_COMMAND_LIST $(git --list-cmds=alias,list-guide) gitk" + __gitcomp "$GIT_TESTING_ALL_COMMAND_LIST $(__git --list-cmds=alias,list-guide) gitk" else - __gitcomp "$(git --list-cmds=main,nohelpers,alias,list-guide) gitk" + __gitcomp "$(__git --list-cmds=main,nohelpers,alias,list-guide) gitk" fi }
@@ -2888,7 +2888,7 @@ __git_main () then __gitcomp "$GIT_TESTING_PORCELAIN_COMMAND_LIST" else - __gitcomp "$(git --list-cmds=list-mainporcelain,others,nohelpers,alias,list-complete,config)" + __gitcomp "$(__git --list-cmds=list-mainporcelain,others,nohelpers,alias,list-complete,config)" fi ;; esac
v2 cover completion.commands: fix multiple command removals
In reply to Duy NguyenHi,
Quoted 1 line · Duy Nguyen
Poking this thread before it goes completely dead...
I've been meaning to send out a re-rolled version. I didn't realize 2 weeks had slipped by already. :/
Quoted 9 lines · Todd Zullinger
Quoted 4 lines
The completion.commands config var must be set in either the system-wide or global config file. The completion script does not read a local repository config.
After the last discussion, I think the consensus was it's ok to allow per-repo config so we can just drop this and update the code to read from any config file, right?
Yeah. Here's an updated series which I hope sums up the changes from the discussion.
Changes since v1:
- Change --list-commands to respect local config and use test_config rather than test_config_global
- Avoid git upstream of pipes
- Check that both cherry and mergetool are removed
- Use __git in completion calls which use --list-cmds, to ensure the proper git repo config is checked with git -C /some/other/repo
Jeff King (2):
git: read local config in --list-cmds
completion: fix multiple command removals
Todd Zullinger (2):
t9902: test multiple removals via completion.commands
completion: use __git when calling --list-cmds
contrib/completion/git-completion.bash | 8 ++++---- git.c | 7 +++++++ help.c | 4 ++-- t/t9902-completion.sh | 6 ++++++ 4 files changed, 19 insertions(+), 6 deletions(-)
Range-diff against v1:
1: 385c596510 < -: ---------- doc: note config file restrictions for completion.commands
-: ---------- > 1: e51bdea6d3 git: read local config in --list-cmds
2: ffa5ed9780 ! 2: 2f5e9da9de t9902: test multiple removals via completion.commands
@@ -18,11 +18,9 @@
'
+test_expect_failure 'completion.commands removes multiple commands' '
-+ echo cherry-pick >expected &&
-+ test_config_global completion.commands "-cherry -mergetool" &&
-+ git --list-cmds=list-mainporcelain,list-complete,config |
-+ grep ^cherry >actual &&
-+ test_cmp expected actual
++ test_config completion.commands "-cherry -mergetool" &&
++ git --list-cmds=list-mainporcelain,list-complete,config >out &&
++ ! grep -E "^(cherry|mergetool)$" out
+'
+
test_expect_success 'setup for integration tests' '3: af029e908d ! 3: 7548dcc23f completion: fix multiple command removals
@@ -2,16 +2,16 @@
completion: fix multiple command removals
- 6532f3740b ("completion: allow to customize the completable
- command list", 2018-05-20) added the completion.commands config
- variable.
+ Commit 6532f3740b ("completion: allow to customize the completable
+ command list", 2018-05-20) tried to allow multiple space-separated
+ entries in completion.commands. To do this, it copies each parsed token
+ into a strbuf so that the result is NUL-terminated.
- The documentation states multiple commands may be added,
- separated by spaces. Adding multiple commands to remove fails,
- only removing the last command in the config.
-
- Fix multiple command removals.
+ However, for tokens starting with "-", it accidentally passes the
+ original non-terminated string, meaning that only the final one worked.
+ Switch to using the strbuf.
+ Reported-by: Todd Zullinger <[email protected]>
diff --git a/help.c b/help.c
@@ -38,6 +38,6 @@
-test_expect_failure 'completion.commands removes multiple commands' ' +test_expect_success 'completion.commands removes multiple commands' '
- echo cherry-pick >expected &&
- test_config_global completion.commands "-cherry -mergetool" &&
- git --list-cmds=list-mainporcelain,list-complete,config |
+ test_config completion.commands "-cherry -mergetool" &&
+ git --list-cmds=list-mainporcelain,list-complete,config >out &&
+ ! grep -E "^(cherry|mergetool)$" out
-: ---------- > 4: 26bef0b2af completion: use __git when calling --list-cmds
PATCH v2 2/4 t9902: test multiple removals via completion.commands
In reply to Duy Nguyen6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) added the completion.commands config variable. Multiple commands may be added or removed, separated by a space.
Demonstrate the failure of multiple removals.
--- t/t9902-completion.sh | 6 ++++++ 1 file changed, 6 insertions(+)
t/t9902-completion.sh +6 -0
@@ -1483,6 +1483,12 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' +test_expect_failure 'completion.commands removes multiple commands' ' + test_config completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config >out && + ! grep -E "^(cherry|mergetool)$" out +' + test_expect_success 'setup for integration tests' ' echo content >file1 && echo more >file2 &&
PATCH v2 3/4 completion: fix multiple command removals
In reply to Duy NguyenFrom: Jeff King <[email protected]>
Commit 6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) tried to allow multiple space-separated entries in completion.commands. To do this, it copies each parsed token into a strbuf so that the result is NUL-terminated.
However, for tokens starting with "-", it accidentally passes the original non-terminated string, meaning that only the final one worked. Switch to using the strbuf.
--- help.c | 4 ++-- t/t9902-completion.sh | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
help.c +2 -2
@@ -393,8 +393,8 @@ void list_cmds_by_config(struct string_list *list)const char *p =strchrnul (cmd_list,' ' );strbuf_add (&sb, cmd_list, p - cmd_list); -if (*cmd_list =='-' ) -string_list_remove (list, cmd_list +1 ,0 ); +if (sb.buf[0 ] =='-' ) +string_list_remove (list, sb.buf +1 ,0 );else string_list_insert (list, sb.buf);strbuf_release (&sb);
t/t9902-completion.sh +1 -1
@@ -1483,7 +1483,7 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' -test_expect_failure 'completion.commands removes multiple commands' ' +test_expect_success 'completion.commands removes multiple commands' ' test_config completion.commands "-cherry -mergetool" && git --list-cmds=list-mainporcelain,list-complete,config >out && ! grep -E "^(cherry|mergetool)$" out
PATCH v2 4/4 completion: use __git when calling --list-cmds
In reply to Duy NguyenSince e51bdea6d3 ("git: read local config in --list-cmds", 2019-03-01), the completion.commands variable respects repo-level configuration. Use __git which ensures that the proper repo config is consulted if the command line contains 'git -C /some/other/repo'.
---
Junio, I referenc the commit id for "git: read local config in --list-cmds" which is earlier in this series, so the id will, of course, differ when you apply it. Let me know if you'd prefer this commit to be dropped and resent once the others in the series are applied or if it's easy for you to adjust when it's queued.
Also, as I wrote in an earlier reply, at the moment, I think using __git only matters for calls where config is in the --list-cmds list. But since Jeff's fix affects all --list-cmds calls, it seems prudent to adjust the 3 other uses of --list-cmds in the completion script.
contrib/completion/git-completion.bash | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
contrib/completion/git-completion.bash +4 -4
@@ -1010,7 +1010,7 @@ __git_all_commands= __git_compute_all_commands () { test -n "$__git_all_commands" || - __git_all_commands=$(git --list-cmds=main,others,alias,nohelpers) + __git_all_commands=$(__git --list-cmds=main,others,alias,nohelpers) } # Lists all set config variables starting with the given section prefix,
@@ -1620,9 +1620,9 @@ _git_help () esac if test -n "$GIT_TESTING_ALL_COMMAND_LIST" then - __gitcomp "$GIT_TESTING_ALL_COMMAND_LIST $(git --list-cmds=alias,list-guide) gitk" + __gitcomp "$GIT_TESTING_ALL_COMMAND_LIST $(__git --list-cmds=alias,list-guide) gitk" else - __gitcomp "$(git --list-cmds=main,nohelpers,alias,list-guide) gitk" + __gitcomp "$(__git --list-cmds=main,nohelpers,alias,list-guide) gitk" fi }
@@ -2888,7 +2888,7 @@ __git_main () then __gitcomp "$GIT_TESTING_PORCELAIN_COMMAND_LIST" else - __gitcomp "$(git --list-cmds=list-mainporcelain,others,nohelpers,alias,list-complete,config)" + __gitcomp "$(__git --list-cmds=list-mainporcelain,others,nohelpers,alias,list-complete,config)" fi ;; esac
PATCH 2/3 t9902: test multiple removals via completion.commands
In reply to Jeff King6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) added the completion.commands config variable. Multiple commands may be added or removed, separated by a space.
Demonstrate the failure of multiple removals.
--- t/t9902-completion.sh | 8 ++++++++ 1 file changed, 8 insertions(+)
t/t9902-completion.sh +8 -0
@@ -1483,6 +1483,14 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' +test_expect_failure 'completion.commands removes multiple commands' ' + echo cherry-pick >expected && + test_config_global completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config | + grep ^cherry >actual && + test_cmp expected actual +' + test_expect_success 'setup for integration tests' ' echo content >file1 && echo more >file2 &&
Re: [PATCH 2/3] t9902: test multiple removals via completion.commands
Quoted 10 lines · Todd Zullinger
6532f3740b("completion: allow to customize the completable command list", 2018-05-20) added the completion.commands config variable. Multiple commands may be added or removed, separated by a space.Demonstrate the failure of multiple removals.
Signed-off-by Todd Zullinger <[email protected]>---
t/t9902-completion.sh test_expect_success 'git --help completion' ' · line 1489
Quoted 7 lines
t/t9902-completion.sh +7
-0@@ -1483,6 +1483,14 @@ test_expect_success 'git --help completion' ' +test_expect_failure 'completion.commands removes multiple commands' ' + echo cherry-pick >expected && + test_config_global completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config | + grep ^cherry >actual && + test_cmp expected actual +'
We normally avoid placing a Git command upstream of a pipe. Instead, the Git command output would be redirected to a file and then the file grep'd. However, in this case, you might consider simplifying the test like this:
test_expect_failure 'completion.commands removes multiple commands' '
test_config_global completion.commands "-cherry -mergetool" &&
git --list-cmds=list-mainporcelain,list-complete,config >actual &&
grep cherry-pick actual
'Re: [PATCH 2/3] t9902: test multiple removals via completion.commands
Quoted 7 lines · Eric Sunshine
Quoted 6 lines · Todd Zullinger
6532f3740b("completion: allow to customize the completable command list", 2018-05-20) added the completion.commands config variable. Multiple commands may be added or removed, separated by a space.Demonstrate the failure of multiple removals.
Quoted 15 lines
t/t9902-completion.sh test_expect_success 'git --help completion' ' · line 1489
Quoted 11 lines
Signed-off-by Todd Zullinger <[email protected]>---
t/t9902-completion.sh +7
-0@@ -1483,6 +1483,14 @@ test_expect_success 'git --help completion' ' +test_expect_failure 'completion.commands removes multiple commands' ' + echo cherry-pick >expected && + test_config_global completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config | + grep ^cherry >actual && + test_cmp expected actual +'We normally avoid placing a Git command upstream of a pipe. Instead, the Git command output would be redirected to a file and then the file grep'd.
Indeed.
Quoted 7 lines
However, in this case, you might consider simplifying the test like this:
test_expect_failure'completion.commands removes multiple commands' '
test_config_globalcompletion.commands "-cherry -mergetool" && git --list-cmds=list-mainporcelain,list-complete,config >actual && grep cherry-pick actual
This wouldn't check what we want. The point is that the command 'cherry' is not listed, so it should be '! grep cherry$ actual'.
Furthermore, I think it would be prudent to check that 'mergetool' is not listed, either.
Re: [PATCH 2/3] t9902: test multiple removals via completion.commands
Quoted 24 lines · SZEDER Gábor
Quoted 7 lines · Eric Sunshine
Quoted 6 lines · Todd Zullinger
6532f3740b("completion: allow to customize the completable command list", 2018-05-20) added the completion.commands config variable. Multiple commands may be added or removed, separated by a space.Demonstrate the failure of multiple removals.
Quoted 15 lines
t/t9902-completion.sh test_expect_success 'git --help completion' ' · line 1489
Quoted 11 lines
Signed-off-by Todd Zullinger <[email protected]>---
t/t9902-completion.sh +7
-0@@ -1483,6 +1483,14 @@ test_expect_success 'git --help completion' ' +test_expect_failure 'completion.commands removes multiple commands' ' + echo cherry-pick >expected && + test_config_global completion.commands "-cherry -mergetool" && + git --list-cmds=list-mainporcelain,list-complete,config | + grep ^cherry >actual && + test_cmp expected actual +'We normally avoid placing a Git command upstream of a pipe. Instead, the Git command output would be redirected to a file and then the file grep'd.
Quoted 1 line
Indeed.
Yes, that's a good point. And one I should have known from reading it here more than once. Thanks to both of you.
Quoted 10 lines
Quoted 7 lines
However, in this case, you might consider simplifying the test like this:
test_expect_failure'completion.commands removes multiple commands' '
test_config_globalcompletion.commands "-cherry -mergetool" && git --list-cmds=list-mainporcelain,list-complete,config >actual && grep cherry-pick actualThis wouldn't check what we want. The point is that the command 'cherry' is not listed, so it should be '! grep cherry$ actual'.
Heh, I had written a similar reply already, but then I got side-tracked for a bit...
I think the grep needs to be negated, e.g.:
! grep ^cherry$ actual
Otherwise it succeeds without the fix, as cherry-pick is expected to be in the --list-cmds output. (If we remove the 'expected' file, it might also make sense to rename 'actual' to 'out' perhaps.)
Quoted 2 lines
Furthermore, I think it would be prudent to check that 'mergetool' is not listed, either.
True. With the simplified test, that's easy enough to add and makes the test description more accurate and the test more thorough. I'll adjust it like so when I re-send:
test_expect_failure 'completion.commands removes multiple commands' '
test_config completion.commands "-cherry -mergetool" && git --list-cmds=list-mainporcelain,list-complete,config >out && ! grep -E "^(cherry|mergetool)$" out
(Using test_config depends on setup_git_directory_gently() in list_cmds(), which Jeff suggested elsewhere in the thread.)
Thanks!
Signature · 1 line
Todd
PATCH 3/3 completion: fix multiple command removals
In reply to Jeff KingFrom: Jeff King <[email protected]>
6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) added the completion.commands config variable.
The documentation states multiple commands may be added, separated by spaces. Adding multiple commands to remove fails, only removing the last command in the config.
Fix multiple command removals.
---
Jeff,
The commit message could probably be worded better, particularly since it's forged in your name.
help.c | 4 ++-- t/t9902-completion.sh | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
help.c +2 -2
@@ -393,8 +393,8 @@ void list_cmds_by_config(struct string_list *list)const char *p =strchrnul (cmd_list,' ' );strbuf_add (&sb, cmd_list, p - cmd_list); -if (*cmd_list =='-' ) -string_list_remove (list, cmd_list +1 ,0 ); +if (sb.buf[0 ] =='-' ) +string_list_remove (list, sb.buf +1 ,0 );else string_list_insert (list, sb.buf);strbuf_release (&sb);
t/t9902-completion.sh +1 -1
@@ -1483,7 +1483,7 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' -test_expect_failure 'completion.commands removes multiple commands' ' +test_expect_success 'completion.commands removes multiple commands' ' echo cherry-pick >expected && test_config_global completion.commands "-cherry -mergetool" && git --list-cmds=list-mainporcelain,list-complete,config |
Re: [PATCH 3/3] completion: fix multiple command removals
Quoted 2 lines · Todd Zullinger
The commit message could probably be worded better, particularly since it's forged in your name.
What you have is OK, but I'd have probably written it like this:
-- >8 --
Subject: [PATCH] completion: fix multiple command removals
Commit 6532f3740b ("completion: allow to customize the completable command list", 2018-05-20) tried to allow multiple space-separated entries in completion.commands. To do this, it copies each parsed token into a strbuf so that the result is NUL-terminated.
However, for tokens starting with "-", it accidentally passes the original non-terminated string, meaning that only the final one worked. Switch to using the strbuf.
--- help.c | 4 ++-- t/t9902-completion.sh | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
help.c +2 -2
@@ -393,8 +393,8 @@ void list_cmds_by_config(struct string_list *list)const char *p =strchrnul (cmd_list,' ' );strbuf_add (&sb, cmd_list, p - cmd_list); -if (*cmd_list =='-' ) -string_list_remove (list, cmd_list +1 ,0 ); +if (sb.buf[0 ] =='-' ) +string_list_remove (list, sb.buf +1 ,0 );else string_list_insert (list, sb.buf);strbuf_release (&sb);
t/t9902-completion.sh +1 -1
@@ -1483,7 +1483,7 @@ test_expect_success 'git --help completion' ' test_completion "git --help core" "core-tutorial " ' -test_expect_failure 'completion.commands removes multiple commands' ' +test_expect_success 'completion.commands removes multiple commands' ' echo cherry-pick >expected && test_config_global completion.commands "-cherry -mergetool" && git --list-cmds=list-mainporcelain,list-complete,config |
Signature · 1 line
2.21.0.675.g01c085a870
Quoted 8 lines · Todd Zullinger
I was playing with the completion.commands config added in
6532f3740b("completion: allow to customize the completable command list", 2018-05-20) and noticed an issue removing multiple commands.I wanted to remove completion for cherry and mergetool, so I added them both to the config:
Quoted 8 lines
git config completion.commands "-cherry -mergetool"
But git still completes cherry in this case, only removing mergetool. Swapping the items in the config yields the opposite result (cherry is removed and mergetool is not).
With luck this will be a clear and easily resolved issue in
list_cmds_by_config()(inhelp.c).
Indeed, this seems to fix it for me:
help.c +2 -2
@@ -393,8 +393,8 @@ void list_cmds_by_config(struct string_list *list)const char *p =strchrnul (cmd_list,' ' );strbuf_add (&sb, cmd_list, p - cmd_list); -if (*cmd_list =='-' ) -string_list_remove (list, cmd_list +1 ,0 ); +if (*sb.buf =='-' ) +string_list_remove (list, sb.buf +1 ,0 );else string_list_insert (list, sb.buf);strbuf_release (&sb);