arm64: dts: rockchip: add more cpu operating points for RK3328
Subsystems (2)
PATCH v2 1/1 arm64: dts: rockchip: add more cpu operating points for RK3328
This allows for greater max frequency on rk3328 boards, increasing performance.
It has been included in Armbian (a linux distibution for ARM boards) for a while now without any reported issues
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1392mhz-opp.patch
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1512mhz-opp.patch
--- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328.dtsi +10 -0
@@ -123,6 +123,16 @@ opp-microvolt = <1300000>; clock-latency-ns = <40000>; }; + opp-1392000000 { + opp-hz = /bits/ 64 <1392000000>; + opp-microvolt = <1350000>; + clock-latency-ns = <40000>; + }; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1450000>; + clock-latency-ns = <40000>; + }; }; amba {
Signature · 1 line
2.21.0
A message that is not in the archive (sent off-list or not yet received): 20190301195552.12562-1-papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Am Freitag, 1. März 2019, 20:55:53 CET schrieb Leonidas P. Papadakos:
Quoted 10 lines
This allows for greater max frequency on rk3328 boards, increasing performance.
It has been included in Armbian (a linux distibution for ARM boards) for a while now without any reported issues
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1392mhz-opp.patch
https://github.com/armbian/build/blob/master/patch/kernel/rockchip64-default/enable-1512mhz-opp.patchSigned-off-by Leonidas P. Papadakos <[email protected]>
as per the response from Rockchip regarding the maximum specification, we'll stay within the save area of frequencies - so not adding these higher ones.
Overclocking a chip is a personal prerogative but should not be part of the general mainline devicetree.
Heiko